800 series (w/ swivel unions) 800p series (w/ deck mount ...n800p series (w/ deck mount pillars)...
TRANSCRIPT
![Page 1: 800 Series (w/ swivel unions) 800P Series (w/ deck mount ...N800P Series (w/ deck mount pillars) Models: N800P, N803/P - Pillars have 1/2”M connections to supplies - Swivel unions](https://reader030.vdocument.in/reader030/viewer/2022040908/5e7fdc54066c78145e7b77b4/html5/thumbnails/1.jpg)
800 Series (w/ swivel unions) Models: 800CSA, 803CSA, 808CSA
800P Series (w/ deck mount pillars) Models: 800CSA/P, 803CSA/P, 808CSA/P
- Swivel unions adjust from 3,5”-9” - 1/2”M connections to supplies - Handshower flow rate: 8.3L/min max
4.7”
4.7”
10.2”
6”
5.5
6.13”
6.88”
5.10”
5.89” 6”
- Pillars have 1/2”M connections to supplies
Parts Breakdown:
All component model numbers are chrome finish only, for all other finishes, please indicate the finish on your purchase order. 1. 800LC (Faucet body only w/ cross handles) / 800LC/L (faucet body only w/ lever handles)2. 00033RC (cold ceramic cartridge) / 00033RH (hot ceramic cartridge) 3. 800/106S (Seat & washer) 3a. 800/1060N (3/4” swivel nut) 4. 800/6200 (cross handle), 800/6016 (white lever handle), 800/6010 (metal lever handle) 5. 800/E809 (Faucet cradle) 5a. V000275 (Vacuum breaker) 6. 91300 (59” metal hose) 7. 7 (Flow restrictor) 8. 800/1021(Chrome and white handshower) 9. 555 (Adjustable swivel unions) 11. 9601 – 7” tall deck pillars 12. 800/1064 (Aerator) 13. 800/1047 (Diverter handle & screw) 14. 800/1060S (Diverter stem) 15. 800/1059 (Diverter piston) 16. 800/6200F (Cartridge flange cover) 18. 800/6200B (Index button)
All measurements are approximate and may change without notice. It is recommended to have product on-site prior to installing plumbing rough-in.
1st Edition / www.clawfootdesign.com / TF: 877-723-8827 (TUBS) Page. S1
![Page 2: 800 Series (w/ swivel unions) 800P Series (w/ deck mount ...N800P Series (w/ deck mount pillars) Models: N800P, N803/P - Pillars have 1/2”M connections to supplies - Swivel unions](https://reader030.vdocument.in/reader030/viewer/2022040908/5e7fdc54066c78145e7b77b4/html5/thumbnails/2.jpg)
3.73” 3.9”
6”
4.7”
27.5” 27.5”
3.73” 3.9”
3.6”
7”
4.7”
20.5” 27.5”
6”
IMPORTANT: All 9670 series floor risers come with pre-installation kits Overall height of freestanding risers = 31.5” Exposed height of freestanding risers = 27.5”
IMPORTANT: Overall height of freestanding risers = 31.5” Exposed height of freestanding risers = 27.5”
800/9670 Series (w/ shutoff valves) Models: 800/9670, 803/9673, 808/9678
800/9650 Series (freestanding NO shutoffs) Models: 800/9650, 803/9653, 808/9658
All component model numbers are chrome finish only, for all other finishes, please indicate the finish on your purchase order. Bath faucet portion only: 1. 800LC (Faucet body only w/ cross handles) / 800LC/L (faucet body only w/ lever handles) 2. 00033RC (cold ceramic cartridge) / 00033RH (hot ceramic cartridge) 3. 800/106S (Seat & washer) 3a. 800/1060N (3/4” swivel nut) 4. 800/6200 (cross handle), 800/6016 (white lever handle), 800/6010 (metal lever handle) 5. 800/E809 (Faucet cradle) 5a. V00275 (Vvacuum breaker) 6. 91300 (59” metal hose) 7. 7 (Flow restrictor) 8. 800/1021(Chrome and white handshower) 9. 555 (Adjustable swivel unions) 12. 800/1064 (Aerator) 13. 800/1047 (Diverter handle & screw) 14. 800/1060S (Diverter stem) 15. 800/1059 (Diverter piston) 16. 800/6200F (Cartridge flange cover) 18. 800/6200B (Index button) Freestanding floor risesr (no shutoff) only: 9650 – Set of freestanding tubes Freestanding floor risers (w/ shutoff) only: 9670CP/R – 20.5” Top half tubes only (includes shutoff valve) 9670CP/K – 10” tube for pre-installation kit 96FN – 3/4” Brass floor flange nut 800/96FL – Floor escutcheon 07146R – Hot / cold cartridge for valves 800/6200F – Cartridge flange cover 800/6200 – Cross handle for shutoff valve
Parts Breakdown:
1st Edition / www.clawfootdesign.com / TF: 877-723-8827 (TUBS) Page. S2
All measurements are approximate and may change without notice. It is recommended to have product on-site prior to installing plumbing rough-in.
![Page 3: 800 Series (w/ swivel unions) 800P Series (w/ deck mount ...N800P Series (w/ deck mount pillars) Models: N800P, N803/P - Pillars have 1/2”M connections to supplies - Swivel unions](https://reader030.vdocument.in/reader030/viewer/2022040908/5e7fdc54066c78145e7b77b4/html5/thumbnails/3.jpg)
2200X Series (w/ swivel unions) Models: 2200X/6820, 2203X/6823, 2207X/6827
2200X/P Series (w/ deck pillars) Models: 2200X/6820P, 2203X/6823P, 2207X/6827P
Parts Breakdown:
- Swivel unions adjust from 3,5”-9” - 1/2”M connections to supplies - Handshower flow rate: 8.3L/min max
All component model numbers are chrome finish only, for all other finishes, please indicate the finish on your purchase order. 1. 2200X (Faucet body only w/ cross handles) 2. 2200X/07146 (hot / cold cartridges) 3. 2200X/1060S (Seat & washer) 3a. 2200X/1060N (3/4” swivel nut) 4. 2200X/6200 (cross handle), 800/6010 (metal lever handle) 5. 9701 (Faucet cradle) 6. 91300 (59” metal hose) 8. 2200X/201(Chrome and white handshower) 9. 555 (Adjustable swivel unions) 11. 2200X/1040 (Spout) 12. 2200X/1063 (Diverter stem) 13. 2200X/1059 (Diverter piston) 14. 2200X/6200B (Index button) Deck Pillars only model 9601 – 7” tall deck pillars
6” 2.59” 3.34”
3.34”
5.12”
2.04”
Adjustable Min 3-3/8” Max 9”
6.87”
5.12”
2.04”
3.34”
3.34”
All measurements are approximate and may change without notice. It is recommended to have product on-site prior to installing plumbing rough-in.
2013-2014 Edition / www.clawfootdesign.com / TF: 877-723-8827 (TUBS) Page. S3
![Page 4: 800 Series (w/ swivel unions) 800P Series (w/ deck mount ...N800P Series (w/ deck mount pillars) Models: N800P, N803/P - Pillars have 1/2”M connections to supplies - Swivel unions](https://reader030.vdocument.in/reader030/viewer/2022040908/5e7fdc54066c78145e7b77b4/html5/thumbnails/4.jpg)
2200X/9650 Series (freestanding NO shutoffs) Models: 2200X/6820/9650, 2203X/6823/9653, 2208X/6828/9658
2200X/9670 Series (w/ shutoff valves) Models: 2200X/6820/9670, 2203X/6823/96753, 2208X/6828/9678
6”
5.12”
2.04”
20”
7.5”
7.27”
5.12”
2.04”
3.34” 27.5” 27.5”
IMPORTANT: All 9670 series floor risers come with pre-installation kits Overall height of freestanding risers = 31.5” Exposed height of freestanding risers = 27.5”
IMPORTANT: Overall height of freestanding risers = 31.5” Exposed height of freestanding risers = 27.5”
All component model numbers are chrome finish only, for all other finishes, please indicate the finish on your purchase order. 1. 2200X (Faucet body only w/ cross handles) 2. 2200X/07146 (hot / cold cartridges) 3. 2200X/1060S (Seat & washer) 3a. 2200X/1060N (3/4” swivel nut) 4. 2200X/6200 (cross handle), 800/6010 (metal lever handle) 5. 9701 (Faucet cradle) 6. 91300 (59” metal hose) 8. 2200X/201(Chrome and white handshower) 9. 555 (Adjustable swivel unions) 11. 2200X/1040 (Spout) 12. 2200X/1063 (Diverter stem) 13. 2200X/1059 (Diverter piston) 14. 2200X/6200B (Index button) Freestanding floor risesr (no shutoff) only: 9650 – Set of 31.5” freestanding tubes w/ hardware kit Freestanding floor risers (w/ shutoff) only: 9670CP/R – 20.5” Top half tubes only (includes shutoff valve) 9670CP/K – 10” tube for pre-installation kit 96FN – 3/4” Brass floor flange nut 800/96FL – Floor escutcheon 07146R – Hot / cold cartridge for valves 800/6200F – Cartridge flange cover 800/6200 – Cross handle for shutoff valve
2013-2014 Edition / www.clawfootdesign.com / TF: 877-723-8827 (TUBS) Page. S4
All measurements are approximate and may change without notice. It is recommended to have product on-site prior to installing plumbing rough-in.
Parts Breakdown:
![Page 5: 800 Series (w/ swivel unions) 800P Series (w/ deck mount ...N800P Series (w/ deck mount pillars) Models: N800P, N803/P - Pillars have 1/2”M connections to supplies - Swivel unions](https://reader030.vdocument.in/reader030/viewer/2022040908/5e7fdc54066c78145e7b77b4/html5/thumbnails/5.jpg)
N800 Series (w/ swivel unions) Models: N800CSA, N803CSA
6”
4.7”
6”
6.13”
6”
6”
6”
6.87”
5.89”
6.87” 4.7”
N800P Series (w/ deck mount pillars) Models: N800P, N803/P
- Pillars have 1/2”M connections to supplies - Swivel unions adjust from 3,5”-9” - 1/2”M connections to supplies - Handshower flow rate: 8.3L/min max
Parts Breakdown:
All component model numbers are chrome finish only, for all other finishes, please indicate the finish on your purchase order. 1. CN800 (Faucet body only w/ cross handles) / CN800/L (faucet body w/ lever handles) 2. 00033RC (cold ceramic cartridge) / 00033RH (hot ceramic cartridge) 3. 800/1060S (Seat & washer) 3a. 800/1060N (3/4” swivel nut) 4. N800/6200 (cross handle), 800/6010 (metal lever handle) 5. N800/E809 (Faucet cradle) 5a. V000275 (Vacuum breaker) 6. 91300 (59” metal hose) 7. 7 (Flow restrictor) 8. N800/1021(Chrome and white handshower) 9. 555 (Adjustable swivel unions) 11. 9601 – 7” tall deck pillars 12. 800/1064 (Aerator) 13. 800/1047 (Diverter handle & screw) 14. N800/1060S (Diverter stem) 15. N800/1059 (Diverter piston) 16. N800/6200F (Cartridge flange cover) 18. N800/6200B (Index button)
All measurements are approximate and may change without notice. It is recommended to have product on-site prior to installing plumbing rough-in.
1st Edition / www.clawfootdesign.com / TF: 877-723-8827 (TUBS) Page. S5
![Page 6: 800 Series (w/ swivel unions) 800P Series (w/ deck mount ...N800P Series (w/ deck mount pillars) Models: N800P, N803/P - Pillars have 1/2”M connections to supplies - Swivel unions](https://reader030.vdocument.in/reader030/viewer/2022040908/5e7fdc54066c78145e7b77b4/html5/thumbnails/6.jpg)
N800/9650 Series (freestanding NO shutoffs) Models: N800/9650, N803/9653
N800/9670 Series (w/ shutoff valves) Models: N800/9670, N803/9673
6”
6”
4.72”
4.72”
3.6”
Parts Breakdown:
IMPORTANT: Overall height of freestanding risers = 31.5” Exposed height of freestanding risers = 27.5”
IMPORTANT: All 9670 series floor risers come with pre-installation kits Overall height of freestanding risers = 31.5” Exposed height of freestanding risers = 27.5”
All component model numbers are chrome finish only, for all other finishes, please indicate the finish on your purchase order. Bath faucet portion only: 1. CN800 (Faucet body only w/ cross handles) / CN800/L (faucet body only w/ lever handles) 2. 00033RC (cold ceramic cartridge) / 00033RH (hot ceramic cartridge) 3. 800/106S (Seat & washer) 3a. 800/1060N (3/4” swivel nut) 4. N800/6200 (cross handle), 800/6016 (white lever handle), 800/6010 (metal lever handle) 5. N800/E809 (Faucet cradle) 5a. V00275 (Vvacuum breaker) 6. 91300 (59” metal hose) 7. 7 (Flow restrictor) 8. N800/1021(Chrome and white handshower) 9. 555 (Adjustable swivel unions) 12. 800/1064 (Aerator) 13. 800/1047 (Diverter handle & screw) 14. 800/1060S (Diverter stem) 15. 800/1059 (Diverter piston) 16. 800/6200F (Cartridge flange cover) 18. 800/6200B (Index button) Freestanding floor risesr (no shutoff) only: 9650 – Set of freestanding tubes Freestanding floor risers (w/ shutoff) only: 9670CP/R – 20.5” Top half tubes only (includes shutoff valve) 9670CP/K – 10” tube for pre-installation kit 96FN – 3/4” Brass floor flange nut 800/96FL – Floor escutcheon 07146R – Hot / cold cartridge for valves 800/6200F – Cartridge flange cover 800/6200 – Cross handle for shutoff valve
6”
27.5” 27.5” 3.9” 3.73”
6”
20.5”
27.5” 3.9” 3.73”
7”
All measurements are approximate and may change without notice. It is recommended to have product on-site prior to installing plumbing rough-in.
Page. S6 1st Edition / www.clawfootdesign.com / TF: 877-723-8827 (TUBS)
![Page 7: 800 Series (w/ swivel unions) 800P Series (w/ deck mount ...N800P Series (w/ deck mount pillars) Models: N800P, N803/P - Pillars have 1/2”M connections to supplies - Swivel unions](https://reader030.vdocument.in/reader030/viewer/2022040908/5e7fdc54066c78145e7b77b4/html5/thumbnails/7.jpg)
850 Series (w/ swivel unions) Models: 850CSA, 853CSA, 857CSA
850/P Series (w/ deck pillars) Models: 850CSA/P, 853CSA/P, 857CSA/P
2.59” 3.34” 2.04”
2.04”
Adjustable Min 3-3/8” Max 9”
6”
6.87”
2.04”
5.3”
- Swivel unions adjust from 3,5”-9” - 1/2”M connections to supplies
Parts Breakdown:
All component model numbers are chrome finish only, for all other finishes, please indicate the finish on your purchase order. 1. 2200X (Faucet body only w/ cross handles) 2. 850/07146 (hot / cold cartridges) 3. 2200X/1060S (Seat & washer) 3a. 2200X/1060N (3/4” swivel nut) 4. 2200X/6200 (cross handle), 9. 555 (Adjustable swivel unions) 11. 2200X/1040 (Spout) 14. 2200X/6200B (Index button) Deck Pillars only model 9601 – 7” tall deck pillars
All measurements are approximate and may change without notice. It is recommended to have product on-site prior to installing plumbing rough-in.
2013-2014 Edition / www.clawfootdesign.com / TF: 877-723-8827 (TUBS) Page. S7
![Page 8: 800 Series (w/ swivel unions) 800P Series (w/ deck mount ...N800P Series (w/ deck mount pillars) Models: N800P, N803/P - Pillars have 1/2”M connections to supplies - Swivel unions](https://reader030.vdocument.in/reader030/viewer/2022040908/5e7fdc54066c78145e7b77b4/html5/thumbnails/8.jpg)
850/9650 Series (freestanding NO shutoffs) Models: 850/9650, 853/9653
850/9670 Series (w/ shutoff valves) Models: 850/9670, 853/9673
7.5”
7.27”
3.34”
2.04”
20”
2.04”
7.27”
3.34”
27.5”
IMPORTANT: All 9670 series floor risers come with pre-installation kits Overall height of freestanding risers = 31.5” Exposed height of freestanding risers = 27.5”
IMPORTANT: Overall height of freestanding risers = 31.5” Exposed height of freestanding risers = 27.5” Faucet / Riser are 6” on centre
Parts Breakdown:
All component model numbers are chrome finish only, for all other finishes, please indicate the finish on your purchase order. 1. C850 (Faucet body only w/ cross handles) 2. 850/07146 (hot / cold cartridges) 3. 2200X/1060S (Seat & washer) 3a. 2200X/1060N (3/4” swivel nut) 4. 2200X/6200 (cross handle), 9. 555 (Adjustable swivel unions) 11. 2200X/1040 (Spout) 14. 2200X/6200B (Index button) Freestanding floor risesr (no shutoff) only: 9650 – Set of 31.5” freestanding tubes w/ hardware kit Freestanding floor risers (w/ shutoff) only: 9670CP/R – 20.5” Top half tubes only (includes shutoff valve) 9670CP/K – 10” tube for pre-installation kit 96FN – 3/4” Brass floor flange nut 800/96FL – Floor escutcheon 07146R – Hot / cold cartridge for valves 800/6200F – Cartridge flange cover 800/6200 – Cross handle for shutoff valve
2013-2014 Edition / www.clawfootdesign.com / TF: 877-723-8827 (TUBS) Page. S8
All measurements are approximate and may change without notice. It is recommended to have product on-site prior to installing plumbing rough-in.
![Page 9: 800 Series (w/ swivel unions) 800P Series (w/ deck mount ...N800P Series (w/ deck mount pillars) Models: N800P, N803/P - Pillars have 1/2”M connections to supplies - Swivel unions](https://reader030.vdocument.in/reader030/viewer/2022040908/5e7fdc54066c78145e7b77b4/html5/thumbnails/9.jpg)
6”
10.75”
6”
722 Series 701 Series
All parts listed are in chrome finish, please specify other finishes when ordering. 722 Model: Handles: 700/6200 Cold Cartridge: 00033RC Hot Cartridge: 00033RH Cartridge Covers: 700/1055F Spout Only: 722/1040 701 Model: Handles: 700/6200 Cold Cartridge: 00033RC Hot Cartridge: 00033RH Cartridge Covers: 700/1055F Spout Only: 701/1040 Hose: 91300 Handshower: B00250CP
Parts Breakdown:
6”
8”
10.75”
6”
7.5”
27.5”
10.75”
6”
All measurements are approximate and may change without notice. It is recommended to have product on-site prior to installing plumbing rough-in.
2013-2014 Edition / www.clawfootdesign.com / TF: 877-723-8827 (TUBS) Page. S9
![Page 10: 800 Series (w/ swivel unions) 800P Series (w/ deck mount ...N800P Series (w/ deck mount pillars) Models: N800P, N803/P - Pillars have 1/2”M connections to supplies - Swivel unions](https://reader030.vdocument.in/reader030/viewer/2022040908/5e7fdc54066c78145e7b77b4/html5/thumbnails/10.jpg)
Models: 9650, 9653, 9654, 9658 Models: 9670, 9673, 9674, 9678
Ove
rall
Hei
ght:
31.5
”
Flo
or to
Top
of R
iser
: 27.
5”
4” L Threading below floor w/ ½”F solder connection
4” Escutcheon Cover Plate: 2.75” diameter x ¾” H
Back to Front: 4” Back to Front: 4”
1” OD / ¾”M Conn. 1” OD / ¾”M Conn.
Ove
rall
Hei
ght:
31.5
”
Flo
or to
Top
of R
iser
: 27.
5”
Centre to Outside handle: 4.5”
Floor to Centre of Valve: 7”
Escutcheon Cover Plate: 2.75” diameter x ¾” H4”
4” L Threading below floor w/ ½”F solder connection
Parts Breakdown:
All parts listed are in chrome finish, please specify other finishes when ordering. 9650 Model: Floor riser tube only: 9650 Escutcheon: 800/96FL 3/4” Brass lock nut: 96FN (sold per each)
Parts Breakdown:
All parts listed are in chrome finish, please specify other finishes when ordering. 9670 Model: Top half riser tube only: 9670CP/R (per set) (includes shutoff valve w/ hardware) Escutcheon: 800/96FL (per each) 3/4” Brass lock nut: 96FN (per each) 10” Bottom tube: 9670CP/T (per each) Cross handle: 800/6200 Cartridges: 00033RH (hot side) 00033RC (cold side)
All measurements are approximate and may change without notice. It is recommended to have product on-site prior to installing plumbing rough-in.
Page. S10 2013-2014 Edition / www.clawfootdesign.com / TF: 877-723-8827 (TUBS)
![Page 11: 800 Series (w/ swivel unions) 800P Series (w/ deck mount ...N800P Series (w/ deck mount pillars) Models: N800P, N803/P - Pillars have 1/2”M connections to supplies - Swivel unions](https://reader030.vdocument.in/reader030/viewer/2022040908/5e7fdc54066c78145e7b77b4/html5/thumbnails/11.jpg)
Models: 9670M, 9673M (XL Series) Models: 9670MEX, 9673MEX (EX Series)
Centre to Outside handle: 4.5”
Floor to Centre of Valve: 7”
1” OD / ¾”M Conn.
Back to Front: 4”
Escutcheon Cover Plate: 2.75” diameter x ¾” H
4”
4” L Threading below floor w/ ½”F solder connection
Ove
rall
Hei
ght:
37.5
”
Flo
or to
Top
of R
iser
: 33.
5”
Centre to Outside handle: 4.5”
Floor to Centre of Valve: 7”
1” OD / ¾”M Conn.
Back to Front: 7”
Ove
rall
Hei
ght:
37.5
”
Flo
or to
Top
of R
iser
: 33.
5”
Escutcheon Cover Plate: 2.75” diameter x ¾” H
4”
4” L Threading below floor w/ ½”F solder connection
All parts listed are in chrome finish, please specify other finishes when ordering. 9670M Model: Top half riser tube only: 9670CP/M (per set) (includes shutoff valve w/ hardware) Escutcheon: 800/96FL (per each) 3/4” Brass lock nut: 96FN (per each) 10” Bottom tube: 9670CP/T (per each) Cross handle: 800/6200 Cartridges: 00033RH (hot side) 00033RC (cold side)
Parts Breakdown:
All parts listed are in chrome finish, please specify other finishes when ordering. 9670MEX Model: Top half riser tube only: 9670CP/MEX (per set) (includes shutoff valve w/ hardware) Escutcheon: 800/96FL (per each) 3/4” Brass lock nut: 96FN (per each) 10” Bottom tube: 9670CP/T (per each) Cross handle: 800/6200 Cartridges: 00033RH (hot side) 00033RC (cold side)
Parts Breakdown:
All measurements are approximate and may change without notice. It is recommended to have product on-site prior to installing plumbing rough-in.
2013-2014 Edition / www.clawfootdesign.com / TF: 877-723-8827 (TUBS) Page. S11
![Page 12: 800 Series (w/ swivel unions) 800P Series (w/ deck mount ...N800P Series (w/ deck mount pillars) Models: N800P, N803/P - Pillars have 1/2”M connections to supplies - Swivel unions](https://reader030.vdocument.in/reader030/viewer/2022040908/5e7fdc54066c78145e7b77b4/html5/thumbnails/12.jpg)
1003 Series 1003H Series
All parts listed are in chrome finish, please specify other finishes when ordering. 1003H Model: Handles: 1003H-6200 Cartridges: 1003H Large Flange: 1003H-96FL 1003 Model: Handles: 1003-6200 Cartridges: 1003H Large Flange: 1003H-96FL
Parts Breakdown:
1020R Series 1020 Series
All parts listed are in chrome finish, please specify other finishes when ordering. 1020 Model: Cold Handle: 1020/6016C Hot Handle: 1020/6016H Cold Cartridge: 21C Hot Cartridge: 21H 1/2” Male Connector: 50M 1020R Model: Cold Handle: 1020/6016C Hot Handle: 1020/6016H Cold Cartridge: 21C Hot Cartridge: 21H 3/8” Female Connector: 38FM 1020/6820 Model: Cold Handle: 1020/6016C Hot Handle: 1020/6016H Cold Cartridge: 21C Hot Cartridge: 21H 1/2” Male Connector: 50M Cradle: 9701-1/2 59” Hose: 91300 Handshower: HD201
Parts Breakdown:
1020/6820 Series
All measurements are approximate and may change without notice. It is recommended to have product on-site prior to installing plumbing rough-in.
2013-2014 Edition / www.clawfootdesign.com / TF: 877-723-8827 (TUBS) Page. S12
![Page 13: 800 Series (w/ swivel unions) 800P Series (w/ deck mount ...N800P Series (w/ deck mount pillars) Models: N800P, N803/P - Pillars have 1/2”M connections to supplies - Swivel unions](https://reader030.vdocument.in/reader030/viewer/2022040908/5e7fdc54066c78145e7b77b4/html5/thumbnails/13.jpg)
8” Widespread
Max
11.
8”
4.91”
820 Series Models: 820CSA, 823CSA, 828CSA
Parts Breakdown:
All parts listed are in chrome finish, please specify other finishes when ordering. 1. 820-1040 (spout) 2. 820-1057 (spout washers) 3. 820-080C (cross mixing union) 4. 820-088 (braided hoses) 5. 820-1053 (valve body) 6. 820-1058C (lift rod nut & washer) 7. 820-090 (lower lift rod washer / nut) 8. 810-092 (lift rod) 9. 820-091 (lift rod connection to pop up) 10. 820-6200 (cross handle) 820-6010 (metal lever handles) 11. 820-1055F (cartridge cover) 12. 820-6 (1/2” coupling nut) 13. 00033RC (ceramic cold cartridge) 00033RH (ceramic hot cartridge) 14. 810-1064 (Aerator 8.3 LPM / 2 GPM) 15. 820-1015 (pop up waste assembly) 16. 3814-4 (extension tube assembly)
Max 6.68”
H820 Series Models: H820CSA, H823CSA
Parts Breakdown:
8” Widespread
5.5”
Max 6.68”
Max 11.79”
4.52” 6.68”
6.68”
All parts listed are in chrome finish, please specify other finishes when ordering. 1. H820-1040 (faucet body &spout) 2. H820-1042 (faucet deck flange) 3. H820-1044 (base mounting plate) 4. H820-1045 (bolts and union nuts) 5. H820-088 (braided hoses) 6. H820-088 (braided hoses) 7. 820-1053 (Valve body) 8. 00033RC (ceramic cold cartridge) 00033RH (ceramic hot cartridge) 9. 820-1055F (cartridge cover) 10. 820-6200 (cross handle) 820-6010 (metal lever handles) 11. 820-1015 (pop up waste assembly) 13. 820-092 (lift rod)
All measurements are approximate and may change without notice. It is recommended to have product on-site prior to installing plumbing rough-in.
2013-2014 Edition / www.clawfootdesign.com / TF: 877-723-8827 (TUBS) Page. S13
![Page 14: 800 Series (w/ swivel unions) 800P Series (w/ deck mount ...N800P Series (w/ deck mount pillars) Models: N800P, N803/P - Pillars have 1/2”M connections to supplies - Swivel unions](https://reader030.vdocument.in/reader030/viewer/2022040908/5e7fdc54066c78145e7b77b4/html5/thumbnails/14.jpg)
2.55”
7.07”
6.48”
9.04”
N840 Series Models: N840, N843
Parts Breakdown:
All parts listed are in chrome finish, please specify other finishes when ordering. 1. N840-1040 (faucet body) 2. N840-1042 (spout) 3. N840-OR (body O ring) 4. N840-01GT (base gasket) 5. N840-1044 (mounting plate) 6. N840-1045 (mounting bolts & nuts) 7. N088 (3/8” supply hoses) 8. N840/6200 (cross handles) 8A. 00033RC (ceramic cold cartridge) 00033RH (ceramic hot cartridge) 9. N840-1064 (aerator) 11. N840-1015 (pop up waste assembly)
N820 Series Models: N820, N823
Parts Breakdown:
6.87”
8” Widespread
Max 6.68”
Max 11.79”
8.45” All parts listed are in chrome finish, please specify other finishes when ordering. 1. N820-1040 (faucet body & spout) 2. N820-1042 (faucet deck flange) 3. N820-1044 (base mounting plate) 4. N820-1045 (mounting bolts & nuts) 5. 6. N820-088 (braided hoses) 7. N820-105. (valve body) 8. 00033RC (ceramic cold cartridge) 00033RH (ceramic hot cartridge) 9. N820-1055F (cartridge cover) 10. N800-6200 (cross handles)
All measurements are approximate and may change without notice. It is recommended to have product on-site prior to installing plumbing rough-in.
2013-2014 Edition / www.clawfootdesign.com / TF: 877-723-8827 (TUBS) Page. S14
![Page 15: 800 Series (w/ swivel unions) 800P Series (w/ deck mount ...N800P Series (w/ deck mount pillars) Models: N800P, N803/P - Pillars have 1/2”M connections to supplies - Swivel unions](https://reader030.vdocument.in/reader030/viewer/2022040908/5e7fdc54066c78145e7b77b4/html5/thumbnails/15.jpg)
8430 Series Models: 8430, 8433, 8437
2.48
3.53”
4.0”
Parts Breakdown:
All parts listed are in chrome finish, please specify other finishes when ordering. 1. 84-1040 (faucet body) 2. 00033RC (ceramic cold cartridge) 00033RH (ceramic hot cartridge) 3. 84-6200F (cartridge cover) 4. 84-6200 (cross handles) 5. 84-092 (lift rod) 6. 84-1064 (Aerator 8.3 LPM / 2 GPM) 7. 801-050N (1/2” flanged lock nut) 8. 820-1015 (pop up waste assembly) 9. 820-6 (1/2” coupling nut) 10. 820-088 (braided hoses)
840 Series Models: 840, 843, 847
Parts Breakdown:
2.48”
2.36”
Max
11.
79”
Pop up drain is 1-1/4”
Max 6.68”
Max
11.
79”
All parts listed are in chrome finish, please specify other finishes when ordering. 1. 2. 3. 800-6200 (cross handles) 4. 800-6200F (cartridge covers) 5. 00033RC (ceramic cold cartridge) 00033RH (ceramic hot cartridge) 6. 840BD (faucet body) 7. N088 (supply tubes) 8. 840-1015 (pop up waste assembly) 9. 14. 15. 840-092 (lift rod assembly) 10. 840-1065 (aerator) 11. 12. 13. 840IN (Installation kit) assembly) 16. 17. 840IN (Installation kit) assembly)
All measurements are approximate and may change without notice. It is recommended to have product on-site prior to installing plumbing rough-in.
2013-2014 Edition / www.clawfootdesign.com / TF: 877-723-8827 (TUBS) Page. S15
![Page 16: 800 Series (w/ swivel unions) 800P Series (w/ deck mount ...N800P Series (w/ deck mount pillars) Models: N800P, N803/P - Pillars have 1/2”M connections to supplies - Swivel unions](https://reader030.vdocument.in/reader030/viewer/2022040908/5e7fdc54066c78145e7b77b4/html5/thumbnails/16.jpg)
Models: 5593XL & CSA, 5594XL & CSA, 5597XL & CSA, 5598XL & CSA, 5599XL & CSA
2.5” diameter escutcheon plate
1.2”H escutcheon
6” Cut to fit adjustable
5.5” Tee assembly
18”
Cut
to fi
t adj
usta
ble
/ Ove
rflo
w tu
be
3”
12” cut to fit adjustable
Parts Breakdown:
All parts listed are in chrome finish, please specify other finishes when ordering. 1. T55CP (top overflow tube) 2. B55CP (bottom shoe) 3. WF55CP (top waste flange) 4. F55CP (face plate) 5. TE55CP (exposed tee) 6. R55PL (face sponge gasket) 7. R55WS (waste gasket) 8. L55CP (lift stop) 9. N55CP (1.5” nut) 10. S55CP (face plate screw) 11. TP55CP (1.5” x 6” bottom tube) 12. 491CP (1.5” floor escutcheon)
All measurements are approximate and may change without notice. It is recommended to have product on-site prior to installing plumbing rough-in.
2013-2014 Edition / www.clawfootdesign.com / TF: 877-723-8827 (TUBS) Page. S16