80010306
TRANSCRIPT
![Page 1: 80010306](https://reader036.vdocument.in/reader036/viewer/2022082213/55cf9921550346d0339bc065/html5/thumbnails/1.jpg)
936.
3216
/a
S
ubje
ct t
o al
tera
tion.
800 10306 Page 1 of 3
KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
Internet: http://www.kathrein.de
Input 2 x 7-16 female
Connector position Bottom
Adjustment 1x, Position bottommechanism continuously adjustable
Weight 14 kg
Wind load Frontal: 460 N (at 150 km/h)Lateral: 300 N (at 150 km/h)Rearside: 1020 N (at 150 km/h)
Max. wind velocity 200 km/h
Packing size 2876 x 272 x 127 mm
Height/width/depth 2574 / 259 / 99 mm
Mechanical specifications
806–960–45°
806–960+45°
7-16 7-16
PanelDual PolarizationHalf-power Beam WidthAdjust. Electrical Downtiltset by hand or by optional RCU (Remote Control Unit)
X
65°
0°–10°
806–960
XPol Panel 806–960 65° 17.5dBi 0°–10°T
800 10306Type No.
Frequency range806 – 866 MHz 824 – 894 MHz 880 – 960 MHz
Polarization +45°, –45° +45°, –45° +45°, –45°
Average gain (dBi) 17.0 ... 17.1 ... 17.0 17.1 ... 17.2 ... 17.1 17.3 ... 17.4 ... 17.3Tilt 0.5° ... 5° ... 9.5° 0.5° ... 5° ... 9.5° 0.5° ... 5° ... 9.5°
Horizontal Pattern:
Half-power beam width 68° 66° 65°
Front-to-back ratio (180°±30°) > 24 dB > 25 dB > 25 dB
Cross polar ratio 0° Typically: 23 dB Typically: 23 dB Typically: 25 dBSector ±60° Typically: > 10 dB Typically: > 10 dB Typically: > 10 dB
Vertical Pattern:
Half-power beam width 7.7° 7.5° 7.3°
Electrical tilt 0.5°–9.5°, continuously adjustable
Sidelobe suppression 0.5° ... 5° ... 9.5° T 0.5° ... 5° ... 9.5° T 0.5° ... 5° ... 9.5° T– for first sidelobe above main beam ≥ 17 ... 14 ... 14 dB ≥ 18 ... 15 ... 15 dB ≥ 20 ... 18 ... 18 dB
Null-fill at 0° tilt Typically: –25 dB
Impedance 50 Ω
VSWR < 1.5
Isolation, between ports > 30 dB
Intermodulation IM3 < –153 dBc (2 x 43 dBm carrier)
Max. power per input 500 W (at 50 °C ambient temperature)
806–960
Horizontal Pattern Vertical Pattern0.5°–9.5° electrical downtilt
65°130°
dB
10
3
0
7.3°
dB
10
3
0
Horizontal Pattern Vertical Pattern0.5°–9.5° electrical downtilt
10
3
0
66°135°
dB
824 – 894 MHz: +45°/–45° Polarization
7.5°
dB
10
3
0
880 – 960 MHz: +45°/–45° Polarization
Horizontal Pattern Vertical Pattern0.5°–9.5° electrical downtilt
10
3
0
68°140°
dB
806 – 866 MHz: +45°/–45° Polarization
7.7°
dB
10
3
0
![Page 2: 80010306](https://reader036.vdocument.in/reader036/viewer/2022082213/55cf9921550346d0339bc065/html5/thumbnails/2.jpg)
936.
3216
/a
S
ubje
ct t
o al
tera
tion.
Page 2 of 3 800 10306
KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
Internet: http://www.kathrein.de
Please note: As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operatingconditions.
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, whichincludes the static mechanical load imposed on an antenna by wind at maximum velocity.Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused byoscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground.These facts must be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safetyregulations.The details given in our data sheets have to be followed carefully when installing the antennas andaccessories.The limits for the coupling torque of RF-connectors, recommended by the connector manufacturersmust be obeyed.
Any previous datasheet issues are invalid.
AccessoriesGeneral Information
Material: Reflector screen: Weather-proof aluminum.Fiberglass radome: The grey fiberglass radomes of these antennasare very stable and extraordinarily stiff. They are resistant to ultravioletradiation and can also be painted to match their surroundings.All screws and nuts: Stainless steel.
Grounding: The metal parts of the antenna including the mounting kit and the innerconductors are DC grounded.
Environmental conditions: Kathrein cellular antennas are designed to operate under the environ-mental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items:– Low temperature: –55 °C– High temperature (dry): +60 °C
Ice protection: Due to the very sturdy antenna construction and theprotection of the radiating system by the radome, the antenna remainsoperational even under icy conditions.
Environmental tests: Kathrein antennas have passed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antennafamilies use identical modules and materials. Extensive tests have beenperformed on typical samples and modules.
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
Accessories (order separately)
738 546 1 clamp Mast: 50 – 115 mm diameter 1.0 kg 2
850 10002 1 clamp Mast: 110 – 220 mm diameter 2.7 kg 2
850 10003 1 clamp Mast: 210 – 380 mm diameter 4.8 kg 2
737 971 1 downtilt kit Downtilt angle: 0° – 8° 2.8 kg 1
Type No. Description RemarksWeight Units perapprox. antenna
2674
2604
2574
9 6472
Bottom view
259
11299
54
Adjustment mechanismwith integrated scale
70
![Page 3: 80010306](https://reader036.vdocument.in/reader036/viewer/2022082213/55cf9921550346d0339bc065/html5/thumbnails/3.jpg)
936.
3216
/a
S
ubje
ct t
o al
tera
tion.
800 10306 Page 3 of 3
KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
Internet: http://www.kathrein.de
General Instructionsfor Adjustment Mechanism
Remove the protective cap. Set downtilt angle by rotating theadjustment wheel.
0° – max.°
max.° – 0°
Manual adjustment procedure:
Description of the adjustment mechanism (protective cap removed):
➀ Adjustment wheel with twist-lockfunction.
➁ Downtilt spindle with integratedscale.
➀ Thread for fixing the protectivecap or the RCU (Remote ControlUnit).
➁ Gearwheel for RCU power drive.
2
12
1
To set the downtilt angle exactly,you must look horizontally at thescale. The lower edge of the gear-wheel must be used for alignment.
Optional: RCU (Remote Control Unit) for remote-controlled downtilt adjustment:
For a description of RCU installation please refer to the respective data sheet.
Screw on the protective cap again.