80115265 timer discriptions useful stuff
TRANSCRIPT
-
7/28/2019 80115265 Timer Discriptions Useful Stuff
1/6
Parameter Description Coding Rules
Autocleaning_Timer Guard timefor detection of SDCCH/TCH autocleaning procedure. step size= 1 sec
T9110
the SCCP connection (started on the reception of step size= 0.1sec
TCH_INFO_PERIOD Periodicityof TCH usage information update in the BSC. stepsize0.1
TL_TCUA
local overload controller. step size= 0.1sec
TS_TCUA
local overload controller. step size= 0.1sec
ALLOC_ANYWAY
at expiry of its queuing timer independently of the threshold
BS_P_CON_ACK Supervisionof the BS Power Control procedure. step size=1 (2 x Samfr)
BS_P_CON_INT Minimum delay between two consecutive BS power commands. step size=1 (2 x Samfr)CCCH_LOAD_IND_PERIOD
INDICATION messages. step size=1 (51mfr)
HO_ALARM_PERSISTENCE
condition is detected.
0.96s. Coded over 5 bits:0: 0s, 1:
INTAVE
timeslots. step size=1 Samfr
LOAD_EV_PERIOD
_ _
averaging.
MIN_CONNECT_TIME
declare the MS "fast" when leaving the cell with a handover. step size=1sec
MS_P_CON_ACK Supervisionof the MS Power Control procedure. step size=1 (2 x Samfr)
MS_P_CON_INT Minimum delay between two consecutive MS power commands. step size=1 (2 x Samfr)
Q703_T1 MTP2 timer"alignment ready".
Q703_T2 MTP2 timer"not aligned".
Q703_T3 MTP2 timer"aligned". step size= 0.1sec
Q703_T4E MTP2 Emergency proving period. step size= 0.1sec
Q703_T4N MTP2 Normalproving period. step size= 0.1sec
Q703_T6 MTP2 timer"remote congestion". step size= 0.1sec
Q704_T2
acknowledgement. step size= 0.1sec
Q704_T4
acknowledgement (first attempt). step size= 0.1sec
Q704_T5
acknowledgement (second attempt). step size= 0.1sec
Q707_T1
acknowledgement. step size= 0.1sec
Q707_T2
message. step size= 0.1sec
RF_RES_IND_PERIOD Delay between two consecutive RF RESOURCE INDICATION. step size= 1sec
SDCCH_COUNTER
the Immediate Assignment procedure. step size=1 (2 x Samfr)
T(conn est) SCCP timersupervising the reception of Connection Confirm message. step size= 0.5sec
T(iar) SCCP timersupervising the activity on SCCP connection. step size= 6sec
T(ias) SCCP timersupervising the sending of Inactivity Test message. step size= 6sec
T(rel) SCCP timersupervising the reception of Release Complete message.
to 255, 16 == 8 sec, 255 == 127.5
T(sst)
messages. step size= 6sec
T_BIND_CNF Maximum waiting time to get a response to a CBSE-BIND primitive. step size= 1 sec
T_BURST Delay between consecutive bursts of BLOCK or UNBLOCK messages. step size=0.1 sec
T_HCP Time duringwhich PING_PONG_HCP is applied after handover. step size= 1sec
T_HO_REQD_LOST
REQUIRED. step size= 1sec
T_IA
remains in the AGCH queue. step size= 0.1sec
T_INHIBIT_CPT Time duringwhich the HO Causes 14, 21, and 24 are inhibited. step size= 1 sec
T_MS_CELL_REJ
targets in subsequent handover attempts. step size= 0.1sec
T_PAG_CS
remain in a Paging Group Queue. It includes the round-trip delay on A step size= 0.1sec
T_QHO Maximum queuing time for Handover Requests. step size= 1sec
T_SDCCH_PC
completion of the Immediate Assignment procedure. step size= 1 (2 x Samfr)
T1 Supervisionof the Blocking/Unblocking procedure. step size= 0.1sec
T11 Maximum queuing time for Assignment Requests. step size= 1 s
T11_FORCED
not allowed by the MSC. step size= 0.1 s
T13 Delay for acknowledgement of RESET received from MSC. step size= 0.1sec
T17
is not processed after reception of a processed OVERLOAD. step size: 0.1 sec
T18 Delay between consecutive debarring actions after a BSS outage. Step size: 0.1 sec
T18_OVERLOAD
overload detection and debarring action. Also delay between step size: 0.1 sec
T19 Supervisionof the Reset Circuit procedure. step size= 0.1sec
T20 Supervisionof Circuit Group Blocking procedure. step size=0.1 sec
T200 (BSC) Supervisionof acknowledgements.
200ms,) 2: 300ms, 3: 400ms, .. . ,
T3101 Supervisionof the Immediate Assignment procedure. step size= 0.1sec
B
SS
TIMER
S
-
7/28/2019 80115265 Timer Discriptions Useful Stuff
2/6
-
7/28/2019 80115265 Timer Discriptions Useful Stuff
3/6
-
7/28/2019 80115265 Timer Discriptions Useful Stuff
4/6
Site (CAE) Flag BSC cell None 0 1 0
06_D < T3103 T3106_D < T9113 Site (CAE) Timer BSC cell ms 1100 1500 1200
Site (CAE) Flag BSC cell None 0 1 0
06_F < T3103 T3106_F < T9113 Site (CAE) Timer BSC cell ms 500 1000 1000
Site (CAE) Flag BSC cell None 0 1 0
Site (CAE) Timer BSC BSC sec 0 25.5 14
RADIOLIN Site (CAE) Timer BSC BSC sec 0 35 12
x T200_D. Site (CAE) Timer BSC BSC sec 0 2 0.5
alto T3212 (MFS) Site (CAE) Number BSC cell 6mn 0 255 30
Site (CAE) Timer BSC BSC sec 2 6553.5 3
be set
< T_HO_REQD_LOST Site (CAE) Timer BSC BSC sec 0 20 5
value
Site (CAE) Timer BSC BSC sec 0 25.5 14
Site (CAE) Timer BSC BSC sec 0 25.5 2
05> T(conn est)
max Site (CAE) Timer BSC BSC sec 11 6553,5 31
15s. Site (CAE) Timer BSC BSC sec 0.1 6553,5 15_ _
y1. T9113 > T3106_D. T9113 > Site (CAE) Timer BSC BSC sec 0 25.5 20
Site (CAE) Timer OMC cell sec 2 3264 120
default
(CDE) Timer MFS MFS sec 0.1 10 0.6_
< (CDE) Timer MFS MFS sec 0.1 10 0.6
recomme
(CDE) Timer MFS MFS sec 0.5 5 1.2
recomme
(CDE) Timer MFS MFS sec 0 10 2.5
recomme
(CDE) Timer MFS MFS ms 0 5000 1200
following (CDE) Timer MFS MFS ms 0 5000 1400
Site (CAE) Timer MFS cell ms 0 5000 680
alto DRX_TIMER_MAX (MFS) Site (CAE) Number BSC BSS sec 0 4 2
alto PAN_DEC (MFS) Site (CAE) Number BSC cell None 0 7 0
Site (CAE) Timer MFS cell ms 60 3000 400_ _
nactivity < Site (CAE) Timer MFS BSS sec 0 100 10_ _
nactivity < Site (CAE) Timer MFS BSS sec 0 200 20
setting of_ _
Preempti Site (CAE) Timer MFS cell sec 0 240 2
paramete
Site (CAE) Timer MFS cell sec 5 300 5
alto T3168 (MFS)
recomme Site (CAE) Timer BSC cell sec 1 4 1
setting of
alto T3212 (BSC) Site (CAE) Number MFS cell 6mn 0 255 30
-
7/28/2019 80115265 Timer Discriptions Useful Stuff
5/6
-
7/28/2019 80115265 Timer Discriptions Useful Stuff
6/6