9. changeable fixture...wa-m-1200 250x190x190mm 160x100mm wa-ktp-100 wa-pap-100 wa-ap-100 wa-ae-100...

9. Changeable Fixture

1. Mechanical Fixture Serie 1200




5. Pneumatical Fixture Serie 3000

6. HF Pneumatic Fixture Serie 4000

7. Mech. Changeable Fixture Serie 5000

8. Vacuum Changeable Fixture Serie 500

9. Storage Box 1500 3000

Büro Süd Büro Rhein Main Büro Westfallen Schweiz Ungarn Internet Waldstraße 4 Ferdinand-Porsche-Str. 17 Steigerring 25 Täfernstr. 2a Zrinyi M. u. 105 www.gps-prueftechnik.de D-82239 Alling D-63500 Seligenstadt D-59075 Hamm CH-5405 Baden-Dättwil HU-8900 Zalaegerszeg Telefon +49-8141-52 747-0 Telefon +49-6182-89 37-0 Telefon +49-2381-99 110-0 Telefon +41-56-483 25 80 Telefon +36-92 510-740 E-Mail: Telefax +49-8141-52 747-47 Telefax +49-6182-89 37-37 Telefax +49-2381-99 110-99 Telefax +41-56-483 25 89 Telefax +36-92 510-741 [email protected]

updated: Dec. 2011 Subject to technical modifications Seite 1

Changeable Units Mechanical Fixture

WA-M-12xx

Technical despription ! small changeable fixture with parallel mechanical pressure unit

! it can be opened during the debugging (1250/1251)

! interface with 192 contacts (1250/1251)

! lower-cost because of the changeable unit

! individual upgrading through the unit assembly system

! customer specified interface

! fixture is suitable for about 300N (200 probes with 1,5N spring force)

! changeable plates / raise of case are not included in the fixture; order separately

! optional locking device with magnet

Fixture: Working area: Probe plate: Moving plate: Holddown plate:

Holddown element:

WA-M-1250 320x100mm WA-KTP-1250 WA-PAP-1250 WA-AP-1250 WA-AE-1250


WA-M-1251-T 2x 160x100mm 2x WA-KTP-100 2x WA-PAP-100 2x WA-AP-100 2x WA-AE-100

Outsidedimensions:

490x330x220mm

490x330x220mm

490x330x220mm

WA-M-1200 250x190x190mm 160x100mm WA-KTP-100 WA-PAP-100 WA-AP-100 WA-AE-100




Small fixture with parallel closing pressure unit

max. working area: 160x100mm, outside dimensions: 250x190x190mm

Order number: WA-M-1200





max. working area: 2x 160x100mm, outside dimensions: 490x330x220mm

Order number: WA-M-1251-T

Probe plate

interface for 2 Sub-D-connectors (9 to 25pole) (not included) max. working area: 160x100mm, outside dimensions: 190x130mm, approx. 10mm thick

Order number: WA-KTP-100







Probe plate

interface for 2 Sub-D-connectors (9 to 25pole) (not included) max. working area: 320x100mm, outside dimensions: 380x130mm, approx. 10mm thick


Moving plate

made of EGS-AS; spring-probes for UUT, with 8 distance stoppers (3mm) max. working area: 320x100mm; outside dimensions: 380x110mm, approx. 5mm thick

Order number: WA-PAP-1250

Holddown plate

made of ESD acrylic plastic, approx. 10mm thick; inkl. screws, max. working area : 160x100mm, outside dimensions: 190x110mm

Order number: WA-AP-100

Holddown plate

made of ESD acrylic plastic, approx. 10mm thick; inkl. screws, max. working area : 320x100mm, outside dimensions: 380x110mm


Moving plate

made of EGS-AS; spring-probes for UUT, with 8 distance stoppers (3mm) max. working area: 160x100mm; outside dimensions: 190x110mm, approx. 5mm thick





Holddown element

crosshead with 4 heigh-adjustable pushdown fingers, mounting material incl.

Order number: WA-AE-100

Tooling Pins (Set)

2 Pins for holddown plate and moving plate; (use only for probing on the top side)

Order number: WA-FB-70

Spring probes for UUT 3N

sockets incl., spring force 3N; extended height: 13,3mm point style: 4mm

Order number: WA-GPA-13-3N


sockets incl., spring force 6N; extended height 13,3mm poing style: 4mm


Holddown element







sockets incl., spring force 3N; extended height 13,3mm point style: 3mm (plastic)

Order number: WA-GPA-13-3N-K

Locking device

with holding magnet (24 V DC)

Order number: WA-M-1200-VM




Changeable Units Mechanical Fixtures

- - - - Outside dimensions: 530 x 430 200mm

- - Max. working area: 350 x 230 mm

- - Lower-cost through the changeable unit

- - Individuell completion through the unit assembly system

- - Fast change of the probe plate and the pushdown plate

- - Self-closing interface through the connectors

- - deskform for easy handling

- - Customer specified interface

- - Case can be opened during the debugging

- - Probe plate and pushdown plate are not included

- - Various accessoires

mechanical changeable fixture with pressure unit

WA-M-1400

Fixture specification

Büro SüdWaldstr. 4D-82239 AllingTelefon +49-8141-52 747-0Telefax +49-8141-52 747-47

Büro Rhein Main Ferdinand-Porsche-Str.17D-63500 Seligenstadt Telefon +49-6182-89 37-0Telefax +49-6182-89 37-37

Büro WestfalenSteigerring 25D-59075 HammTelefon +49-2381-99 110-0Telefax +49-2381-99 110-99

SchweizTäfernstr. 2aCH-5405 Baden-DättwilTelefon +41-56-483 25 80Telefax +41-56-483 25 89

UngarnZirnyi M. u. 105HU-8900 ZalaegerszegTelefon +36-92 510 740Telefax +36-92 510 741

Internetgps-prueftechnik.de

E-Mail:[email protected]


Accessoires for WA-M-1400

WA-KTP-400 WA-AP-400

WA-AE-400 WA-HSP-400

MFG-530-raise of case WA-GPA-13-3N

WA-GPA-13-3N-K

Tech. Beschreibung:Andruckplatte aus ESD -

Plexiglas ( 15 mm)

Außenmaß: 407 x 240 mm

Tech. Beschreibung:Kontaktträgerplatteinkl. interner 192 poliger Schnittstelle.Außenmaß: 400 x 270 mm

Nutzfläche: 350 x 230 mm

Bestell Nummer: Bestell Nummer:

Tech. Beschreibung:Hülsenschutzplatte

für WA-KTP-400

Tech. Beschreibung:Andruckelement, Traverse mit drei höhenverstellbaren Niederhalterninkl.Befestigungsmaterial

Länge 408 mm


Tech. Beschreibung:Gefederte Prüflingsauflage mit 3N inkl. Montage-HülseHöhe ausgefedert 13,3 mm

Kopf-Drm. 3mm Kunststoff

Tech. Beschreibung:Gefederte Prüflingsauflage mit 3N inkl. Montage-Hülse

Höhe ausgefedert 13,3 mm

Kopf-Drm. 4mm Nickel

Bestell Nummer:

Tech. Beschreibung:Gehäuseerhöhung

Höhe 90 mm

Bestell Nummer:

Bestell Nummer:

Tech. Beschreibung:Andruckplatte aus ESD -

Plexiglas ( 15 mm)

Außenmaß: 407 x 240 mm

Tech. Beschreibung:Kontaktträger-Platteinkl. interner 192 poliger Schnittstelle.Außenmaß: 400 x 270 mm



Tech. Beschreibung:Prüflingsauflageplatte , inkl. 6 gefederter Auflagen , Distanzstoppern

( 3mm )


Tech. Beschreibung:Andruckelement ,Traverse mit drei höhen-verstellbaren Niederhalterninkl.Befestigungsmaterial

Länge 408 mm


Tech. Beschreibung:Schnittstellenerweiterung 4 x 96 pol. für Kontaktträgerplatte

WA-KTP-400

Tech. Beschreibung:Hülsenschutzplatte

für WA-KTP-400


Tech. Beschreibung:Schnittstellenerweiterung4 x 96 pol. für Grundgerät WA-M-1500


Specification:Holddown plate made of ESD

acrylic plastic (15 mm)Outside dimensions:

407 x 240 mm

Specification:Probe plate192 pole internal interface incl.Outside dimensions:400 x 270 mm

Working area: 350 x 230 mm

Order number: Order number:

Specification:Protecting plate for sockets for

WA-KTP-400

Specification:Holddown element,crosshead with 3 height adjustable pushdown fingers,mounting material incl.

Lenght: 408 mm


Specification:Spring probes for UUT seating, sockets incl., spring force 3N Expanded height: 13,3 mm

Point style: 4 mm (nickel)

Specification:Raise of case

Height: 90 mm


Specification:Spring probes for UUTseating, sockets incl.,spring force 3NExpanded height: 13,3mm

Point style: OD 3 mm (plastic)

Order number:









- Outside dimensions : 280 x 430 x 200 mm - Max. working area : 220 x 115 mm - deskform for easy handling - Lower-cost through the changeable unit - Individuell completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Self-closing interface through the connectors - Costumer specified interface - Case can be opened during the debugging - Various accessories - Probe plate and pushdown plate are not included

WA-M-1401










Accessories for WA-M-1401


WA-AE-140 MFG-280-Raise of case

WA-GPA-13-3N

SWpecification:Holddown plate made of ESD acrylic plastic (10mm)

Outside dimensions:

230 x 160 mm

Specification:Changeable probe plate, 96 pole internal interface incl.Outside dimensions: 270 x 140 mm

Working area: 220x110 mm


Specification:Raise of casefor WA-M-1401

Height: 45 mm

Specification:Holddown element, crosshead with 3 height-adjustable pushdown fingers,mounting material incl.

Length: 160 mm


Specification:Spring probes for UUT seating, socket incl.

Expanded height: 13,3 mm

Order number:









- Outside dimensions : 280 x 430 x 200 mm - Max. working area : 220 x 115 mm - deskform for easy handling - Lower-cost through the changeable unit - Individuell completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Self-closing interface through the connectors - Costumer specified interface - Case can be opened during the debugging - Various accessories - Probe plate and pushdown plate are not included

WA-M-1401










Accessories for WA-M-1401


WA-AE-140 MFG-280-Raise of case

WA-GPA-13-3N

SWpecification:Holddown plate made of ESD acrylic plastic (10mm)

Outside dimensions:

230 x 160 mm

Specification:Changeable probe plate, 96 pole internal interface incl.Outside dimensions: 270 x 140 mm

Working area: 220x110 mm


Specification:Raise of casefor WA-M-1401

Height: 45 mm


Length: 160 mm


Specification:Spring probes for UUT seating, socket incl.


Order number:











WA-M-15xx

Technical despription

! parallel mechanical pressure unit



! interface with contacts or probe-interface

! fixture is suitable for about 300N (200 probes with 1,5N spring force)


! case can be opened during the debugging


! various accessoires

Fixture: Working area: Probe plate: Moving plate: Holddown plate:

Holddown element:

WA-M-1500-I 330x180mm WA-KTP-400-I WA-PAP-400-I WA-AP-400 WA-AE-400


WA-M-1501-I 180x110mm WA-KTP-140-I WA-PAP-140-I WA-AP-140 WA-AE-140

Outsidedimensions:

530x450x240mm

280x450x240mm

280x450x240mm


WA-M-1501-T 560x450x240mm 2x 205x110mm 2x WA-KTP-140 2x WA-PAP-140 2x WA-AP-140 2x WA-AE-140


WA-M-1510-I 740x510x250mm 520x250mm WA-KTP-410-I WA-PAP-410-I WA-AP-410 WA-AE-410

WA-M-1511-I-T 740x510x250mm 2x 260x160mm 2x WA-KTP-210-I 2x WA-PAP-210-I 2x WA-AP-210 2x WA-AE-210

WA-M-1511-T 740x510x250mm 2x 295x180mm 2x WA-KTP-210 2x WA-PAP-210 2x WA-AP-210 2x WA-AE-210

WA-M-1501-I-T 560x450x240mm 2x 180x110mm 2x WA-KTP-140-I 2x WA-PAP-140-I 2x WA-AP-140 2x WA-AE-140




Fixture with parallel closing pressure unit

incl. 192pole internal interface max. working area: 350x230 mm



incl. 96 pole internal interface max. working area: 205x110 mm


Fixture with parallel closing pressure unit for FKS-IF

incl. mounting support for internal interface with max. 510Pins max. working area: 180x110 mm

Order number: WA-M-1501-I

Mechanical Tandem Fixture for FKS-IF

with two separate parallel mechanical pressure units WA-M-1501 max. working area: 2x 180x110mm; incl. mounting supports for int. Interface with max. 510Pins

Order number: WA-M-1501-I-T


incl. mounting support for internal interface with max. 1020Pins max. working area: 330x180mm





Mechanical Tandem Fixture

with two separate parallel mechanical pressure units WA-M-1501 max. working area: 2x 205x110mm; incl. 96 pole internal interface



incl. mounting support for internal interface with 1020Pins, expandable to max. 2040Pins max. working area: 520x250mm; outside dimensions: 740x510x250mm


Mechanical Tandem Fixture for FKS-IF

with two separate parallel mechanical pressure units WA-M-1511, outside dimensions: 740x510x250mm max. working area: 2x 260x160mm; incl. mounting supports for int. Interface with max. 512Pins

Order number: WA-M-1511-I-T

Mechanical Tandem Fixture

with two separate parallel mechanical pressure units WA-M-1511 outside dimensions: 740x510x250mm; max. working area: 2x 295x180mm; incl. 96 pole internal interface



incl. 4x96pole internal interface max. working area: 520x295 mm outside dimensions: 740x510x250mm





Probe plate

CEM1; incl. 192pole internal interface max. working area: 350x230mm, outside dimensions: 400x270mm, approx. 10mm thick


Probe plate

incl. 96pole internal interface max. working area: 205x110mm


Probe plate for FKS-IF

incl. mounting support for internal interface with max. 510Pins max. working area: 180x110 mm

Order number: WA-KTP-140-I

Probe plate

CEM1; incl. 4x96pole internal interface max. working area. 520x295mm outside dimensions: 570x335mm, approx. 10mm thick



incl. mounting support for internal interface with max. 1020Pins max. working area: 330x180mm






for WA-M-1510-I / WA-P-3010-I; incl. mounting support for internal interface with 1020Pins, expandable to 2040Pins max. working area: 520x250mm; outside dimensions: 570x335mm


Probe plate

incl. 96pole internal interface max. working area: 295x180mm; outside dimensions: 336x209mm


Moving plate

spring-mounted, 6 spring-probes for UUT incl., with distance stoppers (3mm) max. working area: 350x230mm, outside dimensions: 400x254mm, approx. 5mm thick


Moving plate

made of EGS-AS; incl. 10 distance stoppers (3mm) max. working area: 330x180mm, outside dimensions: 400x270mm, approx. 5mm thick

Order number: WA-PAP-400-I


incl. mounting support for internal interface with 510Pins max. working area: 260x160 mm





Moving plate

made of EGS-AS; 6 spring-probes for UUT incl., with distance stoppers (3mm) max. working area: 205x110 mm; outside dimensions: 270x140mm, approx. 5mm thick


Moving plate

approx. 5mm thick, 8 spring-probes for UUT incl. and 15 distance stoppers 02 (3mm), made of EGS-619-AS-COMP Var. 2, max. product area: 520x295mm, outside dimensions: 570x331mm


Moving plate

for WA-M-1510-I / WA-P-3010-I; made of EGS-AS incl. 10 distance stoppers (3mm) max. working area: 520x250 mm; outside dimensions : 570x335mm; approx. 5mm thick


Moving plate

made of EGS-AS; incl. 10 distance stoppers (3mm) and 4 spring probes for UUT max. working area: 260x160 mm; outside dimensions: 336x209mm, approx. 5mm thick


Moving plate

made of EGS-AS; incl. 10 distance stoppers (3mm) max. working area: 180x110mm, outside dimensions: 270x140mm, approx. 5mm thick





Moving plate

made of EGS-AS; 6 spring-probes for UUT incl. and 10 distance stoppers (3mm) max. working area: 295x180mm; outside dimensions: 332x209mm, approx. 5mm thick


Holddown plate

made of ESD acrylic plastic, approx. 10mm thick, max. working area: 205x110mm; outside dimensions: 260x158mm


Holddown plate

made of ESD acrylic plastic, approx. 15mm thick, max. working area: 520x295mm; outside dimensions : 576x330,5mm


Holddown plate

made of ESD-PVC, approx. 10mm thick max. working area: 295x180mm; outside dimensions: 335x227 mm


Holddown plate

made of ESD acrylic plastic, approx. 15mm thick, outside dimensions : 407x240mm max. working area: 350x230mm; incl. 6pcs pushdown fingers M3x30 PA





Holddown element

crosshead with 3 heigh-adjustable pushdown fingers, mounting material incl.; length: 408mm


Holddown element

crosshead with 5 heigh-adjustable pushdown fingers, mounting material incl.; length 578mm


Holddown element



Protecting plate

for WA-KTP-400 approx. 3mm thick, incl. fixing material outside dimensions: 370x250mm

Order number: WA-HSP-400

Holddown element






Protecting plate

for WA-KTP-140 acrylic plastic, approx. 3mm thick; incl. fixing material outside dimensions: 239x112mm


Protecting plate

for WA-KTP-210 acrylic plastic, approx. 3mm thick; incl. fixing material outside dimensions: 321x182mm


Interface expansion 4x96pole Wire-Wrap

for WA-KTP-400 upgradeable, incl. fixing material

Order number: WA-KTP-IF384

Interface-block 170pole

with interface pins max. 6 blocks for a WA-KTP-400-I adjustable incl. fixing material


Protecting plate

for WA-KTP-410 approx. 3mm thick, incl. fixing material outside dimensions: 543x316mm





Interface expansion 2x96pol. Wire-Wrap

for WA-KTP-140 upgradeable, incl. fixing material


Interface-block 170pole

with interface probes max. 6 blocks for a WA-M-1500-I adjustable incl. fixing material

Order number: WA-M/P-IF170

Interface expansion 2x96pol. Wire-Wrap

for WA-M-1401/WA-M-1501 upgradeable, incl. fixing material

Order number: WA-M-IF192

Pneumatic-interface-block 8pole

for internal interface on the probe plates WA-KTP-xxx-I incl. fixing material

Order number: WA-KTP-IF-PBB-8

Interface expansion 4x96pole Wire-Wrap

for WA-M-1400/WA-M-1500/WA-P-3000 upgradeable, incl. fixing material

Order number: WA-M-IF384




Pneumatic-interface-block 8pole

for internal interface in the housing WA-M-1xxx-I or WA-P-3xxx-I incl. fixing material

Order number: WA-M/P-IF-PSB-8

Interfac expansion for WA-KTP-140/400/410-I

for upgrading mounting below the probe plate, for max. 3 blocks (not included); mountable on two mounting positions

Order number: WA-KTP-XX0-I-004

Raise of case 90mm V2.0

for case MFG-530-Pult-Gehäuse-V1.0; aluminium, heigh: 90mm

Order number: MFG-530-GEHÄUSEERHÖHUNG-90

Raise of case 250mm

for case MFG-530-Pult-Gehäuse-V1.0 heigh: 250mm


Interface expansion for WA-M-1510-I

for upgrading; mounting below the base plate, for max. 3 blocks (not included); mountable on two mounting positions

Order number: WA-M-1510-I-203_1




Raise of case 45mm

for case MFG-280-PULT-GEHÄUSE-V1.0 (for WA-M-1401/1501; PA3001)

Order number: MFG-280-GEHÄUSEERHÖHUNG

Start button, magnetic

for WA-M-15xx deskform with parallel holddown mechanic-system

Order number: WA-M-1500-MS


sockets incl., spring force 3N; extended height: 13,3mm point style: 4mm



sockets incl., spring force 6N; extended height 13,3mm poing style: 4mm



for case MFG-700-Pult-V1.0; aluminium RAL7035





WA-M-16xx

Technical despription

! parallel mechanical pressure unit

! interface with 384 contacts or probe-interface




! fixture is suitable for about 1000N (1000 probes with 1N spring force)

! case can be opened during the debugging


! various accessoires

Fixture: Outside dimensions:

Working area: Probe plate: Moving plate: Holddown plate:

WA-M-1600 530x270x450mm 350x230mm WA-KTP-1600 WA-PAP-1600 WA-AP-1600

WA-M-1600-I 530x270x450mm 350x215mm WA-KTP-1600-I WA-PAP-1600 WA-AP-1600





without changeable plates, incl. 384pole internal interface (expandable), max. working area: 350x230mm; outside dimensions: 530x270x450mm


Probe plate

CEM1; incl. 384pole internal interface (expandable) max. working area: 350x230mm; outside dimensions: 440x320mm



CEM1; incl. mounting support for internal interface with max. 1700Pins, usable interface-blocks: TSI-50-USB-A-Adapter / TSI-50-16A-45-IK TSI-50-101 / TSI-50-PBB max. working area: 350x215mm; outside dimensions: 440x320mm


Moving plate

made of EGS-AS with 8 distance stoppers (3mm) outside dimensions: 440x320mm, ca. 5mm stark



without changeable plates, incl. mounting support for internal interface with max. 1700Pins, usable interface-blocks: TSI-50-USB-A-Receiver / TSI-50-16A-45-FKS TSI-50-201 / TSI-50-PSB max. working area: 350x215mm; outside dimensions: 530x270x450mm





Holddown plate

made of ESD acrylic plastic, approx. 15mm thick outside dimensions: 445x310mm


Raise of case 250mm

for case MFG-530-Pult-Gehäuse-V1.0 heigh: 250mm



for case MFG-530-Pult-Gehäuse-V1.0; aluminium, heigh: 90mm


Changeable Units Pneumatical Fixtures

- Pneumatical changeable unit with mechanical pressure unit - deskform for easy handling - No effort because of the dual pneumatical drivesystem (24V) - Parallel mechanical pressure unit - Outside dimensions: 530 x 450 x 240 mm - Max. UUT size : 350 x 230 mm - Internal interface 192 pole standard - Extandable to 384 contacts - Signal for the start by pushing down the pressure unit - Lower-cost through the changeable unit - Individuell completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Self-closing interface through the connectors - Costumer specified interface - Thought out security conception - Check of the contacting position (optional) - Case can be opened during the debugging - Various accessories - Probe plate and pushdown plate are not included

WA-P-3000










Accessories for WA-P-3000


WA-PAP-400 WA-HSP-400

Outside dimensions: 530 x 450 x 240 mm

MFG-530-GE-90-V2 WA-KTP-IF384

WA-GPA-13-3N-KWA-M-IF-384

Specification:Holddown plate made of ESD

acrylic plastic ( 15 mm)Outside dimensions:

407 x 240 mm

Specification:Changeable probe plate,192 pole internal interface includedOutside dimensions: 400 x 270 mm



Specification:

Protecting plate for sockets

for WA-KTP-400

Specification:Changeable moving plate,spring-mounted, 6 spring-mounted frames incl., with distance stoppers (3 mm)



Specification:Interface expansion4 x 96 pole for changeable probe plate

WA-KTP-1400/1500

Order number:

Specification:Raise of case for WA-M-1500

Height: 90 mm

Order number:

Specification:Spring probes forUUT seating,sockets incl.Spring force 3N,Expanded height: 13,3 mm,Point style: OD 3 mm, (plastic)

Order number:

Specification:Interface expansion4 x 96 pole changeable fixturesWA-M-1400/1500

Order number:Order number:









- Pneumatical changeable unit with mechanical pressure unit - Outside dimensions: 530 x 450 x 240 mm - Max. working area: 330 x 180 mm - Lower-cost through thechangeable unit - Individual completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Internal interface holding for max. 6 interface blocks, porbes incl. - deskform for easy handling - No effort because of the dual pneumatical drivesystem (24V) - Customer specified interface - Case can be opened during the debugging - Probe plate and pushdown plate are not included- Various accessoriesGroße Auswahl an Zubehör- Thought out security system- Check of the contacting position (optional)

WA-P-3000-I










Accessories for WA-P-3000-I

WA-P-3000-I MFG-530-GE-90-V2

WA-M/P-IF-170 WA-P-3000-SG


Height: 90 mm with opening in the back,

cover incl.

Specification:Deskform with parallel holddown mechanical-system, without changeableprobe platesOutside dimensions:530 x 450 x 240 mm



Specification:Interface block, 170 pole,with pins, max. 6 pieces in a WA-P-3000-I adjustable,

mounting material incl.

Specification:End position switch,24V signal at Pin 7 closed cover (test position)











WA-KTP-400-I WA-AP-400

WA-PAP-400-I WA-KTP-IF-170

WA-GPA-13-3N-K WA-GPA-13-3N

Techn. Beschreibung:Andruckplatte aus ESD - Plexiglas (10 mm)

Außenmaße: 160 x 230 mm

Specification:Changeable probe plate with protecting plate for sockets,Outside dimensions: 400 x 270 mmWorking area: 330 x 180mm

Order number: Bestellnummer:

Specification:Changeable moving plate (3N), spring mountOutseide dimensions: 400 x 270 mmWorking area: 330 x 180 mm

Specification:Interface block, 170 pole, with interface pins, max. 6 Stück in a WA-KTP-400-I adjustable, mounting material incl.


Specification:Spring probes for UUT seating, sockets incl., spring force (3N),Expanded height: 13,3 mmPoint style.: 4 mm (nickel)

Specification:Spring probes for UUT seating, sockets incl., spring force(3N)Expanded heightt: 13,3mm

Point style: 3 mm (plastic))


Specification:Holddown plate made of ESDacrylic plastic (15 mm)Working area: 407 x 240 mm

Order number:

Büro Süd

Waldstr. 4

D-82239 Alling

Telefon +49-8141-52 747-0

Telefax +49-8141-52 747-47

Büro Rhein Main

Ferdinand-Porsche-Str.17

D-63500 Seligenstadt

Telefon +49-6182-89 37-0

Telefax +49-6182-89 37-37

Büro Westfalen

Steigerring 25

D-59075 Hamm

Telefon +49-2381-99 110-0

Telefax +49-2381-99 110-99

Schweiz

Täfernstr. 2a

CH-5405 Baden-Dättwil

Telefon +41-56-483 25 80

Telefax +41-56-483 25 89

Ungarn

Zirnyi M. u. 105

HU-8900 Zalaegerszeg

Telefon +36-92 510 740

Telefax +36-92 510 741

Internet

gps-prueftechnik.de

E-Mail:

[email protected]


- Pneumatical changeable unit with mechanical pressure unit - deskform for easy handling - No effort because of the dual pneumatical drivesystem ( 24V ) - Parallel mechanical pressure unit - Outside dimensions: 450 x 280 x 240 mm - Max. UUT size : 220 x 115 mm - Signal for the start by pushing down the pressure unit - Lower-cost through the changeable unit - Individuell completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Self-closing interface through connectors 96 pole - Costumer specified interface - Thought out security conception - Check of the contacting position (optional) - Case can be opened during the debugging - Various accessories - Probe plate and pushdown plate are not included

WA-P-3001












WA-PAP-140 MFG-280-GE-45

WA-GPA-13-3N WA-GPA-13-3N-K

Specification:Holddown plate made of ESD -acrylic plastic (10mm)

Working area: 230 x160 mm

Specification:Changeable probe plate,96 pole internal interface incl.Outside dimensions: 270 x 140 mm



Specification:Raise of case for W-A-P 3001

Height: 45 mm

Specification:Changeable probe plate, spring -mounted, 6 spring-mounted frames incl., with distance stoppers (3mm)Working area:

220 x 110 mm


Specification:Spring probes forUUT seating,sockets incl.Spring force 3N,Expanded height: 13,3 mm,

Point style: OD 3 mm, (plastic)

Specification:Spring-mounted UUT-frames sockets incl.











- Pneumatical changeable unit with mechanical pressure unit - Outside dimensions: 280 x 450 x 240 mm - Max.working area: 110 x 180 mm - Lower-cost through the changeable unit - Individual completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Internal interfaceholding for max. 3 interface blocks,with pins - deskform for easy handling - No effort because of the dual pneumatical drivesystem ( 24V ) - Costumer specified interface - Case can be opened during the debugging - Probe plate and pushdown plate are not included- Various accessories- Thought out security conception- Check of the contacting position (optional)

WA-P-3001-I











WA-P-3001-I MFG-280-GE-45

WA-M/P-IF-170 WA-P-3000-SG


Height: 45 mm

Specification:Deskform with parallel holddown mechanical-system, without changeable probe platesOutside dimensions:280 x 450 x 240 mm



Specification:Interface block, 170 pole, with pins max.3 pieces in a WA-P-3001-I adjustable,

monting material incl.

Specification:End position switch,24V signal at Pin 7,

closed cover (testposition )











WA-KTP-140-I WA-AP-140

WA-PAP-140-I WA-KTP-IF-170

WA-GPA-13-3N-K WA-GPA-13-3N

Techn. Beschreibung:Andruckplatte aus ESD - Plexiglas (10 mm)

Außenmaße: 160 x 230 mm

Specification:Changeable probe plate with protecting plate for socket Outside dimensions: 140 x 270 mmWorking area: 110 x 180 mm

Order number: Bestellnummer:

Specification:Changeable moving plate,spring mountedOutside dimensions: 140 x 270 mmWorking area: 110 x 180 mm

Specification:Interface block, 170 pole , withinterface pins, max. 3 pieces in a WA-KTP-140-I adjustable, monting material incl.


Specification:Spring probes (3N),socket incl.Expanded height: 13,3 mmPoint style.: 4 mm (nickel)

Specification:Spring probes (3N), socket incl.Expanded height: 13,3mm

Point style.: 3 mm (plastic)


Specification:Holddown plate made of ESD acrylic plastic (10 mm)Outside dimensions: 160 x 230 mm

Order number:

Büro Süd

Waldstr. 4

D-82239 Alling

Telefon +49-8141-52 747-0

Telefax +49-8141-52 747-47

Büro Rhein Main



Telefon +49-6182-89 37-0

Telefax +49-6182-89 37-37

Büro Westfalen

Steigerring 25

D-59075 Hamm

Telefon +49-2381-99 110-0

Telefax +49-2381-99 110-99

Schweiz

Täfernstr. 2a


Telefon +41-56-483 25 80

Telefax +41-56-483 25 89

Ungarn

Zirnyi M. u. 105


Telefon +36-92 510 740

Telefax +36-92 510 741

Internet

gps-prueftechnik.de

E-Mail:

[email protected]

Changeable Units Pneumatical Tandem Fixture

- Pneumatical Tanden Fixture with two seperate parallel mechanical pressure unit

- deskform for easy handling - No effort because of the dual pneumatical drivesystem (24 V) - Parallel mechanical pressure unit - Outside dimensions : 560 x 450 x 240 mm - Max. UUT size: 2x 110 x 220 mm - Signal for the start by pushing down the pressure unit - Lower-cost through the changeable unit - Individuell completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Self-closing interface through connectors 96 pole - Customer specified interface - Thought of security conception - Check of the contacting position (optional) - Case can be opened during the debugging - Various accessoires - Probe plate and pushdown plate are not included

WA-P-3001-T


Büro Süd

Waldstr. 4

D-82239 Alling

Telefon +49-8141-52 747-0

Telefax +49-8141-52 747-47

Büro Rhein Main



Telefon +49-6182-89 37-0

Telefax +49-6182-89 37-37

Büro Westfalen

Steigerring 25

D-59075 Hamm

Telefon +49-2381-99 110-0

Telefax +49-2381-99 110-99

Schweiz

Täfernstr. 2a


Telefon +41-56-483 25 80

Telefax +41-56-483 25 89

Ungarn

Zirnyi M. u. 105


Telefon +36-92 510 740

Telefax +36-92 510 741

Internet

gps-prueftechnik.de

E-Mail:

[email protected]

Changeable Units Pneumatical Tandem Fixture

Accessoires for WA-P-3001-T


WA-AE-140 WA-PAP-140

WA-GPA-13-3N MFG-530-GE-90-V2

WA-P-3000-SGWA-GPA-13-3N-K

Specification:Holddown plate made of ESD-

acrylic plastic (10 mm)Outside dimensions:

160 x230 mm

Specification:Changeable probe plate,96 pole internal interface incl.Outside dimensions: 140 x 270 mm


Bestellnummer:Order number: Order number:

Specification:Changeable moving plate,spring-mounted, 6 spring-mounted frames incl., with

distance stoppers ( 3 mm)



Length: 160 mm

Order number:Order number: Order number:

Specification:Raise of case for WA-P-3000

Height: 90 mm

Specification:Spring-mounted UUT-frames sockets incl.



Specification:Spring probes forUUT seating,sockets incl.Spring force 3N,Expanded height: 13,3 mm,Point style: OD 3 mm,

(plastic)

Order number:

Specification:safety switch,24V signal at closed contact on

PIN 7

Order number:

Büro Süd

Waldstr. 4

D-82239 Alling

Telefon +49-8141-52 747-0

Telefax +49-8141-52 747-47

Büro Rhein Main



Telefon +49-6182-89 37-0

Telefax +49-6182-89 37-37

Büro Westfalen

Steigerring 25

D-59075 Hamm

Telefon +49-2381-99 110-0

Telefax +49-2381-99 110-99

Schweiz

Täfernstr. 2a


Telefon +41-56-483 25 80

Telefax +41-56-483 25 89

Ungarn

Zirnyi M. u. 105


Telefon +36-92 510 740

Telefax +36-92 510 741

Internet

gps-prueftechnik.de

E-Mail:

[email protected]


updated: Feb. 2011 Subject to technical modifications Page 1


WA-P-3010

Fixture specification ! Pneumatical changeable unit with mechanical pressure unit

! Outside dimensions: 740 x 510 x 250 mm

! Max. UUT size : 520 x 295 mm

! Lower-cost through the changeable unit

! Individuell completion through the unit assembly system

! Fast change of the probe plate and the pushdown plate

! 4 X 96 Interface connectors , standard 384 test points

! Fixture is suitable for about 600 N (400 probes with 1,5 N spring force)

! deskform for easy handling

! No effort because of the dual pneumatical drivesystem (24V)

! Check of the contacting position (optional)

! Customer specific interface

! Case can be opened during debugging

! Probe plate and pushdown plate are not included

! Additional accessories





Changeable probe plate WA-KTP-410 Material in CEM1 4 x 96 pole internal interface incl. Outsite dimension : 570 x 335 x 10 mm Working area : ca. 520 x 295 mm

Pneumatical changeable unit WA-P-3010with mechanical pressure unit Outsite dimension : 740 x 510 x 250 mm Working area : 520 x 295 mm Interface with 4 x 96 pin Connectors

Protecting plate for sockets WA-HSP-410

Protecting plate for WA-KTP-410

Polycarbonat plate 6mm thick, colourless Outsite dimension : 543 x 316 x 6mm

Changeable moving plate WA-PAP-410

Spring mounted with 8 Probes (8x6N) ca. 5mm thick, 15 distance stoppers (3mm) ESD-Material (ca. 10¹² )

Outsite dimension : 570 x 331 x 5 mm Working area : 520 x 295 mm

Holddown plate WA-AP-410

ESD-acrylic plastic (ca. 10¹² ), ca 15mm thick

Outsite dimension : 576 x 331 x 15 mm Working area : 520 x 295 mm



Shielded RF Test Fixture Pneumatic Fixture

WA-HF-4000

Fixture Specification ! Pneumatic fixture for High Frequency Test

! Changeable cassette unit with pneumatic pressure frame mechanism

! Forceless and adjustable compression speed due to doubled pneumatic Cylinders (24V)

! Parallel pressure frame mechanism

! Start signal by depressing the pressure frame mechanism (optional)

! Kit designed as cassette type unit to maximize economy

! Fast and easy to change upper and bottom probe plate

! Interface modular and customize configurable

! Optional: Pylon Interface or G 12 Interface from Virginia Panel

! Integrated start, stop and reset buttons

! Running position monitoring (optional)

! Lockable housing

! Plug-in module for 4 PCB (100x160 mm) for local electronics

! Combination of RF, audio and video test

! For testing mobile telephones, "Bluetooth"-devices and WLAN

! Suited for acoustic (microphone and speaker) and optic (video camera) test

! Shielding from external RF-Signals

! Changeable Kit has to bought separately



Shielded RF Test Fixture Technical Specification

Desk Fixture with parallel pressure mechanics, inclusive interface for shielded RF chamber

Size:Test Fixture: external dimension: L x D x H 550mm x 520mm x 380mm Complete cassette: external dimension: L x D 260mm x 210mm working area: L x D 180mm x 180mm

Weight: incl. cassette unit: 20 kg

Temperature: operating temperature: +10°C …+40°C storage temperature: -210°C …+60°C

Humidity: operating temperature: 90% r.h. no cond. by +10°C …+40°C 75% r.h. no cond. by +30°C …+40°C storage temperature: 90% r.h. no cond. by +60°C

Compressed Air: 6 bar oil-free

Power Supply: 24V DC/3A for pneum. valve

Interface Chamber Interface modular and free configurable

Pylon Block Interface for 10 Interface Blocks Order-No.: TSI-50-IF

Virginia Panel, G12 (see also G12 Receiver) Order-No.: ITA-G12

Interface HF-ChamberPneumatic: hose diameter 6mm Pneumatic block: for max. 6 solenoid valves Connecting Panel (D x H): 250mm x 105mm (useable) Earth Connection: thread bolts M5 x 15 as well as snap fasteners

Connecting Panel for HF Chamber HF: 2 x SMA-SMA socket Order-No.: HF-37SMA-50-1/1 -- UE Pneumatic: 8 x couplings - bulkhead fitting Order-No.: Festo-SCN-PK-3 Audio: 9-polig. D-Sub, shielded Order-No.: HF-SUB-D-9-M-L Daten: 15-polig. D-Sub, shielded Order-No.: HF-SUB-D-15-M-L Power + Reserve: 25-polig. D-Sub, shielded Order-No.: HF-SUB-D-25-M-L Optional USB connector shielded Order-No.: HF-USB-A-M

RF - Shielded without Absorber: with Absorber: Order-No.: WA-HF-4000-ABS

300 MHz …. 500 MHz > 60 dB 300 MHz …. 500 MHz > 75 dB 600 MHz …. 1000 MHz > 55 dB 600 MHz …. 1000 MHz > 75 dB 1100 MHz …1500 MHz > 50 dB 1100 MHz …1500 MHz > 70 dB 1600 MHz …2000 MHz > 45 dB 1600 MHz …2000 MHz > 60 dB 2100 MHz …2500 MHz > 55 dB 2100 MHz …2500 MHz > 65 dB



Shielded RF Test Fixture Accessories

Complete Changeable Fixture Kit WA-HF-400

Consisting of: WA-HF-KTP-400 WA-HF-AP-400 WA-HF-PAP-400

Changeable probe plate WA-KTP-400

Changeable probe plate incl. internal 96 pol. connector Outside dimension: 260 x 210 x 10 mm Working area: 180 x 180 mm

Changeable pressure plate WA-AP-400

pressure plate 10mm dick Incl. 4 Pneumatic connector96 pol. connectorOutside dimension: 260 x 210 mm

Changeable moving plate WA-PAP-400

Incl. 6 spring probes and distance stopper (3mm) Working area: 180 x 180 mm

Spring Probes WA-GPA-13-3N

Spring force 3N, incl. sockets Height 13,3 mm, Tip style 4 mm (Nickel/Rhodium)

9. changeable fixture...wa-m-1200 250x190x190mm 160x100mm wa-ktp-100 wa-pap-100 wa-ap-100 wa-ae-100...

Documents