9 jan 2018 tuesday morning p-1 chair · 9 jan 2018 tuesday morning room 1 p-1 session: opening and...
TRANSCRIPT
9 Jan 2018 Tuesday
Morning Room 1 P-1
Session:
Opening and Plenary Session (1)
Chair: A. Fatemi Robert Bosch GmbH, Renningen, Germany
09:30 – 09:40 C. Bolay Lord Mayor City of Ostfildern Welcome Address
H.-J. Mesenholl Technische Akademie Esslingen e.V., Ostfildern, Germany Opening
W. J. Bartz T+S Tribologie und Schmierungstechnik, Denkendorf, Germany Greetings of the Honorary Chairman
09:40 – 10:00 C. Wincierz Evonik Resource Efficiency GmbH, Darmstadt, Germany Tribute to Professor Peter Jost
10:00 – 10:30 L. Lindemann, A. Gosalia FUCHS PETROLUB SE, Mannheim, Germany The Lubricants Industry in (E)Motion: E-Mobility, Technology, Sustainability
10:30 – 11:00 Break – Exhibition
11:00 – 11:30 M. Anderson Falex Corporation, Sugar Grove, USA Can Tribology save the World?
11:30 – 12:00 K. Kreisköther RWTH Aachen University, Germany Quo Vadis Electric Mobility? – Power Trains for the Electric Cars of the Future
12:00 – 12:30 T. Garbe Volkswagen Aktiengesellschaft, Wolfsburg, Germany E-Gas – An Important Element on the Way to CO2-Neutral Mobility
12:30 – 14:00 Break – Exhibition
4
9 Jan 2018 Tuesday
Afternoon Room A-1
Session:
Base Oils (1)
Chair:
R. Zechel Klüber Lubrication München SE & Co. KG, München, Germany
14:00 – 14:30 S. Meinhardt ExxonMobil Chemical Central Europe GmbH, Köln, Germany Metallocene Based Polyalphaolefins (mPAO) – Building Blocks For Industrial Gear Oils
14:30 – 15:00 D. Schäffel, S. Fleischer Clariant, Frankfurt, Germany Polyalkylene Glycols as a Base Fluid for Gear Oils under Sustainability Aspects
15:00 – 15:30 F. Rittig, N. Kashani, K. Geyer, A. Minke, K. Molawi, P. Ma BASF SE, Ludwigshafen, Germany New High Viscosity Basestock for Gear Applications
15:30 – 16:00 Break – Exhibition
5
9 Jan 2018 Tuesday
Afternoon Room A-2
Session:
Engine Oils (1)
Chair:
M. Seemann Evonik Industries AG, Darmstadt, Germany
14:00 – 14:30 C. Warrens, S. Balakrishnan BP, Pangbourne, United Kingdom Formulating Engine Oils to Optimise FE Benefits in Current and Future Car Engines
14:30 – 15:00 P. Hutchinson, F. Lauterwasser, C. Wincierz Evonik Oil Additives GmbH, Darmstadt, Germany Improving Vehicle Fuel Efficiency through Viscosity Index Improver in Engine Oils
15:00 – 15:30 G. Miró, S. Bastidas, B. Tormos, L. Ramirez Universitat Politècnica de València, Valencia, Spain T. Pérez Repsol, Móstoles, Spain Assessment of New Engine Oil Formulations based on Fuel Consumption Reduction in a Diesel Engine
15:30 – 16:00 Break – Exhibition
6
9 Jan 2018 Tuesday
Afternoon Room A-3
Session:
Lubricant Films
Chair:
D. Shakhvorostov Evonik Oil Additives GmbH, Darmstadt, Germany
14:00 – 14:30 J. Luo State Key Laboratory of Tribology, Beijing, China Molecular Behaviour in Thin Film Lubrication
14:30 – 15:00 V. B. Niste, H. Tanaka, J. Sugimura Kyushu Univerity, Fukuoka, Japan The Effect of Temperature on ZDDP Tribofilms Efficient at Preventing Hydrogen Embrittlement
15:00 – 15:30 A. Gies, J. Karner, F. Seibert Oerlikon Surface Solution AG, Balzers, Liechtenstein J. Becker, T. Stelzig Oerlikon Balzers Coating Germany GmbH, Bingen, Germany Properties of DLC coatings in High Temperature Applications and Interactions with Lubricants
15:30 – 16:00 Break – Exhibition
7
9 Jan 2018 Tuesday
Afternoon Room A-4
Session:
Gears (1)
Chair:
A. Kadiric Imperial College London, United Kingdom
14:00 – 14:30 F. Siglmüller Gear Research Centre (FZG), Technical University of Munich, Garching, Germany S. Kupfer, T. Lohner, K. Stahl TU München, Germany T. Kamps, G. Reinhart Fraunhofer Research Institution for Casting, Composite and Processing Technology IGCV, Augsburg, Germany Efficiency of Additive Manufactured Gears with Conformal Cooling
14:30 – 15:00 J. Brandão, J. Seabra INEGI, Porto, Portugal Measurement of Mild Wear in Gear Tests and Correlation with Tribological Parameters
15:00 – 15:30 M. Oehler, B. Magyar, B. Sauer University of Kaiserslautern, Germany Combination of Tribological and Thermal Simulation Using the Example of Worm Gear Drives
15:30 – 16:00 Break – Exhibition
8
9 Jan 2018 Tuesday
Afternoon Room A-5
Session:
Roller Element Bearings
Chair:
T. Kiekbusch University of Kaiserslautern, Germany
14:00 – 14:30 H. Grillenberger Schaeffler Technologies AG & Co. KG, Herzogenaurach, Germany Normal Bearing Running Noise – Advanced Simulation and Prediction on Catalogue Level
14:30 – 15:00 N. Bader, H.C. Liu, G. Poll Leibniz Universität Hannover IMKT, Hannover, Germany A. Furtmann Siemens AG, Nürnberg, Germany Capacitance Measurement of Film Thickness in EHL Contacts
15:00 – 15:30 A. Clarke, S. Hutt, R. Pullin, A. Cockerill, P. Evans Cardiff University, Cardiff, United Kingdom Acoustic Emission as an Aid to Understanding of Lubricated Contacts in Tribological Systems
15:30 – 16:00 Break – Exhibition
9
9 Jan 2018 Tuesday
Afternoon Room A-6
Session:
Polymers and Tribocontact (1)
Chair:
A. Elter Robert Bosch GmbH, Renningen, Germany
14:00 – 14:30 D. Nadermann, A. Elter, M. Ahmed, S. Solovyev, H. Schwarze Robert Bosch GmbH, Renningen, Germany Effect of Short Fiber Reinforced Polymers on the Flow Factor Calculation
14:30 – 15:00 J. Bai Cheng, B. Wetzel Institute for Composite Materials, Kaiserslautern, Germany Transfer Films in Plastic/ Metal Sliding: A Contribution towards Understanding their Formation Mechanisms
15:00 – 15:30 M. Fox, M. Priest, W. Hopkins University of Bradford, Bradford, United Kingdom C. Dyson Rocol Ltd, Leeds, United Kingdom Thin-F/Lubrication of PEK-Steel Sliding Contact at High Temperatures and Speeds
15:30 – 16:00 Break – Exhibition
10
9 Jan 2018 Tuesday
Afternoon Room A-7
Session:
Metal Working Fluids (1)
Chair:
F. Passman Biodeterioration Control Associates, Inc., Princeton, USA
14:00 – 14:30 N. Webb, P. Brutto, B. Pyzowski, S. Kraszczyk Angus Chemical, Buffalo Grove, USA Influence of Neutralizer Chemistry on Lubrication of Water-Dilutable Metalworking Fluids
14:30 – 15:00 T. McClure SLC Testing Services Inc., Westlake, USA R. Stubbs Sea-Land Chemical Europe Ltd., Manchester, United Kingdom Using DOE with Twist Compression Tests (TCT) for Formulation of Metalworking Lubricants
15:30 – 16:00 Break – Exhibition
11
9 Jan 2018 Tuesday
Afternoon Room A-8
Session:
Tribology of Machine Elements
Chair:
K. Topolovec Miklozic Powertrib Limited, Oxford, United Kingdom
14:00 – 14:30 K. Topolovec Miklozic Powertrib Limited, Oxford, United Kingdom Robustness of a Lubricating Film
14:30 – 15:00 M. Gleß, A. Schwarz Ingenieurbüro Gleß, Stuttgart, Germany Reliability of Concentrated Contacts due to a Synergetic Loop Between Experiment and Simulation
15:00 – 15:30 R. Liu Shanghai Jiaotong University, Shanghai, China Transient Tribological Performance of the Crankshaft-Main Bearings During Engines Start Operations
15:30 – 16:00 Break – Exhibition
12
9 Jan 2018 Tuesday
Afternoon Room B-1
Session:
Base Oils (2)
Chair:
R. Zechel Klüber Lubrication München SE & Co. KG, München, Germany
16:00 – 16:30 D. Bulut, T. Seibel Leibniz University Hannover, Germany Radial Lip Seal Aging in Synthetic Oils
16:30 – 17:00 M. Greaves Dow Europe GmbH, Horgen, Switzerland Improving the Hydrolytic Stability of Natural & Synthetic Esters using Polyalkylene Glycols
17:00 – 17:30 T. Norrby, A.-L. Jonsson Nynas AB, Nynashamm, Sweden Antioxidant Response in Base Oils Blends – The Role of Secondary AO and Base Oil Sulfur
17:30 – 18:00 G. S. Dodos, F. Zannikos National Technical University of Athens, Greece / ELDON’S S.A. Lubricants, Greece Evaluation of the Oxidation Stability of Base Oils in the Rapid Small Scale Oxidation Test
18:00 Come Together with Snacks and Beverages
13
9 Jan 2018 Tuesday
Afternoon Room B-2
Session:
Engine Oils (2)
Chair:
L. Lindemann FUCHS PETROLUB SE, Mannheim,Germany
16:00 – 16:30 M. Offenbecher, R. Aufischer, G. Hager Miba Bearing Group, Laarkrichen, Austria Crank Train Optimization Based on Dimensioning and Surface Interaction with Oil / Oil Additives
16:30 – 17:00 F. DeBlase Lanxess Global Solutions US Inc., Naugatuck, USA Tribological Studies of Retention of Lubricant Friction Reduction for Extending Fuel Economy
17:00 – 17:30 Y. Moriizumi, K. Yamamoto ADEKA Corporation, Tokyo, Japan S. Heiden ADEKA Europe GmbH, Düsseldorf, Germany Fuel Economy Performance of MoDTC Friction Modifiers in EO under NEDC and WLTP Test Conditions
17:30 – 18:00 M. Seemann, T. Bartels, C. Meister Evonik Industries AG, Darmstadt, Germany G. Ruß Hochschule Darmstadt, Germany Engine Oil Pumpability in a Modern Engine
18:00 Come Together with Snacks and Beverages
14
9 Jan 2018 Tuesday
Afternoon Room B-3
Session:
Ionic Liquids
Chair:
I. Mimami Luleå University of Technology, Luleå, Sweden
16:00 – 16:30 S. Plebst, T. J. S. Schubert, M. Ahrens, F.-M. Stiemke IOLITEC Ionic Liquids Technologies GmbH, Heilbronn, Germany Selected ILs and Nanomaterials as High Performance Additives for Lubricants & Neat Lubricants
16:30 – 17:00 H. Kondo, K. Hatsuda, P. Baghel, N. Tano Dexerials Corporation, Shimotsuke, Japan Newly Synthesized ILs Having a Long Alkyl Chain and their Friction Behaviors
17:00 – 17:30 E. Nyberg, I. Minami Luleå University of Technology, Luleå, Sweden Feasibility of Ionic Liquid Lubricant for Mars Mechanisms
17:30 – 18:00 A. Igartua, F. Pagano, E. Berriozabal, R. Bayon IK4-Tekniker, Eibar, Spain I. Minami Luleå University of Technology, Luleå, Sweden N. Dörr AC2T research GmbH, Wiener Neustadt, Austria Ionic Liquids for Space Applications
18:00 Come Together with Snacks and Beverages
15
9 Jan 2018 Tuesday
Afternoon Room B-4
Session:
White Etching Cracks
Chair:
G. Poll Leibniz University Hannover, Germany
16:00 – 16:30 A. Kadiric Imperial College London, United Kingdom The Origins and Significance of White Etching Cracks
16:30 – 17:00 D. Cornel, F. Gutierrez Guzman, M. Oezel, G. Burghardt, G. Jacobs RWTH Aachen University, Aachen, Germany Formation of WECs under Shear and Rolling Loading and the Detection of Preliminary Stages
17:00 – 17:30 C. Mayer, B. Vengudusamy, A. Orendoz, S. Grundei, C. Enekes, R. Spallek Klüber Lubrication München SE & Co. KG, München, Germany Lubricant Influences on the Formation of White Etching Cracks (WEC)
17:30 – 18:00 M. Birjukovs, A. Jakovičs University of Latvia, Riga, Republic of Latvia W. Holweger Schaefler Technologies GmbH & Co. KG, Herzogenaurach, Germany Modelling of Thermal Stresses in Bearing Steel Structure Generated by Electrical Current Impulses
18:00 Come Together with Snacks and Beverages
16
9 Jan 2018 Tuesday
Afternoon Room B-5
Session:
Roller Element Bearings (2)
Chair:
K. Bauckhage Bosch Rexroth AG, Elchingen, Germany
16:00 – 16:30 T. Kiekbusch, B. Sauer Technische Universität Kaiserslautern, Germany Detailed Calculation of Friction and Slip with MBS Models of Rolling Bearings
16:30 – 17:00 N. Nagler, K. Bauckhage Bosch Rexroth AG, Elchingen, Germany Interaction of Bearing Surface Finish and Bearing Performance under Mixed Friction Conditions
17:00 – 17:30 R. Böttcher, G. Poll Leibniz Universität Hannover, Germany Radially Preloaded Cylindrical Roller Bearings – Optimized Preload and Operating Performance
17:30 – 18:00 J. Li Xi'an Technological University, Xi'an, China Thermal Characteristics of High Speed Roller Bearing with Considering the Slip in Contact Region
18:00 Come Together with Snacks and Beverages
17
9 Jan 2018 Tuesday
Afternoon Room B-6
Session:
Polymers and Tribocontact (2)
Chair:
C. Pastor Robert Bosch GmbH, Renningen, Germany
16:00 – 16:30 T. Gradt, G. Theiler Federal Institute for Materials Research and Testing (BAM), Berlin, Germany Tribological Properties of Polymer Composites for Applications in LNG Environment
16:30 – 17:00 S. Klien, J. Voyer, F. Ausserer, A. Diem V-Research GmbH, Dornbirn, Austria Lubricated Polymer Friction on Rough Surfaces
17:00 – 17:30 G. Theiler, T. Gradt Federal Institute for Materials Research and Testing (BAM), Berlin, Germany Friction and Wear Characteristics of Polymers in Gaseous and Liquid Hydrogen
17:30 – 18:00 P. Olaru SETEC, Bucharest, Romania Frictional Nanosoldering Sheets of Pseudocomposite for Reducing Surface Roughness in Electrical
18:00 Come Together with Snacks and Beverages
18
9 Jan 2018 Tuesday
Afternoon Room B-7
Session:
Metalworking Fluids (2)
Chair:
K. Terveen Hermann Bantleon GmbH, Ulm, Germany
16:00 – 16:30 T. Norrby, L. Malm, P. Wedin, G. Ponti Nynas AB, Nynashamm, Sweden Emulsion Stability in Semi-Synthetic MWF Formulations
16:30 – 17:00 K. Wirz Evonik Nutrition & Care GmbH, Essen, Germany Versatile Synthetic Oils and Defoamers as Performance Boosters for Processing Lubricants like Metal Working Fluids
17:00 – 17:30 N. El Mehbad Najran University, Najran, Kingdom of Saudi Arabia Study of a New Additive Prepared by Phase Transfer Catalysts as Antioxidant
17:30 – 18:00 I. Dangleterre, P. Lohmann Hermann Bantleon GmbH, Ulm, Germany Cooling Lubricant Technology 4.0 – First Field Experience
18:00 Come Together with Snacks and Beverages
19
9 Jan 2018 Tuesday
Afternoon Room B-8
Session:
Test Methods (1)
Chair:
M. Grebe Hochschule Mannheim, Germany
16:00 – 16:30 A. Schneider, G. Patzer, F. Welz Opimol Instruments Prüftechnik GmbH, München, Germany A Novel Screening Method for Tribological Properties of High Performance Greases
16:30 – 17:00 K. Topolovec Miklozic Powertrib Limited, Oxford, United Kingdom Performance Screening of Wind Turbine Gear Oils for Improved Reliability of Wind Turbines
17:00 – 17:30 D. Bijani, M. B. de Rooij, D. J. Schipper Univeristy of Twente, Enschede, The Netherlands E. L. Deladi Bosch Transmission Technology, Tilburg, The Netherlands The Influence of Surface Texturing and Boundary slip on the Film Thickness in Parallel Sliding Surfaces
17:30 – 18:00 F. Tasche, H. Pasligh, F. Dinkelacker, C. Schmidt, B. Denkena Leibniz Universität Hannover, Germany Tribological Influence of Machined Micro Dimples in Cylinder Liners on Heavy Duty Diesel Engines
18:00 Come Together with Snacks and Beverages
20
10 Jan 2018 Wednesday
Morning Room 1 P-2
Session:
Plenary Session (2)
Chair:
M. Jungk MJ Tribology, Geisenheim, Germany
09:00 – 09:30 M. Moseler Fraunhofer Institute for Mechanics of Materials (IWM), Freiburg, Germany Potentials, Perspectives and Limitations of Atomistic Tribosimulation
09:30 – 10:00 N. Espallargas Norwegian University of Science and Technology (NTNU), Trondheim, Norway Surface Effects on Friction and Wear of Stainless Steels Exposed to Fatigue, Corrosive and Lubricated Environment
10:00 – 10:30 J. Dench, J. Wong Imperial College London, United Kingdom Anomalous Lubricant Flow in Elastohydrodynamic Contacts
10:30 – 11:00 Break – Exhibition
21
10 Jan 2018 Wednesday
Morning Room C-1
Session:
Bio Lubricants (1)
Chair:
R. Luther Fuchs Schmierstoffe GmbH, Mannheim, Germany
11:00 – 11:30 G. Kraft, R. Luther, A. Robben Fuchs Schmierstoffe GmbH, Mannheim, Germany Unconventional Raw Materials as Sources for Bio-Lubricants
11:30 – 12:00 L. Labanauskas, K. Petrauskas, S. Asadauskas FTMC, Vilnius, Lithuania Suitability of Mono-Unsaturated Esters for High Performance Hydraulic Fluids
12:00 – 12:30 N. Zulkifli, N. A. Mohd Zainal University of Malaya, Kuala Lumpur, Malaysia Polyol Ester-Based Biolubricants – Their Tribological Properties
12:30 – 14:00 Break – Exhibition
22
10 Jan 2018 Wednesday
Morning Room C-2
Session:
Engine Oils (3)
Chair:
C. Warrens BP, Reading, United Kingdom
11:00 – 11:30 F. Alemanno, A. M. Tortora, D. Veeregowda Ducom Instruments Europe B.V., Groningen, The Netherlands Investigating Lubrication by Engine Oils Using Stribeck Curve and Ultra-Low Wear Test Method
11:30 – 12:00 M. Frauscher, A. Ristic, C. Besser, N. Dörr AC2T research GmbH, Wiener Neustadt, Austria Correlation of Engine Oil Degradation Products with Friction and Wear Properties
12:00 – 12:30 K. Simonovic, M. Kalin University of Ljubljana, Ljubljana, Slovenia Assessment of the Automotive Lubricant Performance in the Boundary Lubrication Regime
12:30 – 14:00 Break – Exhibition and Poster Session
23
10 Jan 2018 Wednesday
Morning Room C-3
Session:
Greases (1)
Chair:
T. Norrby Nynas AB, Nynashamm, Sweden
11:00 – 11:30 C. Specht Schaeffler Technologies AG & Co. KG, Schweinfurt, Germany Rolling Bearing Greases for Enhanced Demands in Todays and Future Automotive Applications
11:30 – 12:00 T. Langlais, S. Springer Ergon, Jackson, USA The Effect of Base Oils on Thickening and Physical Properties of Lubricating Greases
12:00 – 12:30 M. Fathi-Najafi Nynas AB, Nynäshamm, Sweden How to Optimize the Performance of Lubricating Greases by Selecting Suitable Base Oil Blends
12:30 – 14:00 Break – Exhibition
24
10 Jan 2018 Wednesday
Morning Room C-4
Session:
EHL-Contacts
Chair:
D. Bartel Otto-von-Guericke-Universität Magdeburg, Germany
11:00 – 11:30 R. Beilicke Otto-von-Guericke-Universität, Magdeburg, Germany Investigation of Power Loss and Contact Conditions of a DLC Coated Helical Gear Pair Considering Limiting Shear Stress Behavior of the Lubricant
11:30 – 12:00 S. Thielen, B. Magyar, F. Flavien, B. Sauer University of Kaiserslautern, Germany EHL Simulation of the Radial Shaft Sealing System
12:00 – 12:30 T. Zapletal, P. Sperka, I. Krupka, M. Hartl Brno University of Technology, Brno, Czech Republic Film Thickness and Friction on a Border of Mixed EHL Contact
12:30 – 14:00 Break – Exhibition
25
10 Jan 2018 Wednesday
Morning Room C-5
Session:
Test Methods (2)
Chair:
E. Georgiou Falex, Rotselaar, Belgium
11:00 – 11:30 F. Rummel, X. Wittmann, Anton Paar Germany GmbH, Ostfildern, Germany K. S. Pondicherry Anton Paar GmbH, Graz, Austria Combining Rheological and Tribological Studies of Lubricants
11:30 – 12:00 P. Sperka, I. Krupka, M. Hartl Brno University of Technology, Brno, Czech Republic Optical Observation of Lubricating Film in Textured Journal Bearings
12:00 – 12:30 A. Friedl, G. Poll Leibniz University Hannover, Germany Investigation of the Lubricant Distribution in a High-Speed Gearbox
12:30 – 14:00 Break – Exhibition
26
10 Jan 2018 Wednesday
Morning Room C-6
Session:
Polymers
Chair:
T. Gradt Federal Institute for Materials Research and Testing (BAM), Berlin, Germany
11:00 – 11:30 D. Paulkowski, J. Seven Fraunhofer IFAM, Bremen, Gremany Deformation Behaviour of Microstructured Elastomers
11:30 – 12:00 A. Adam, D. Paulkowski Fraunhofer IFAM, Bremen, Germany Adhesion Reduction of Elastomers with Plasmapolymeric Coatings
12:00 – 12:30 J. Voyer , F. Ausserer, S. Klien, I Velkavrh, A. Diem V-Research GmbH, Dornbirn, Austria Effect of Contact Area Reduction by Surface Laser Structuring on Adhesive Friction of Elastomers
12:30 – 14:00 Break – Exhibition
27
10 Jan 2018 Wednesday
Morning Room C-7
Session:
Metalworking Fluids (3)
Chair:
K. Terveen Hermann Bantleon GmbH, Ulm, Germany
11:00 – 11:30 E. Galgoci Munzing NA LP, Bloomfield, USA Filtration and Defoamer Performance in Aqueous Metalworking Fluids
11:30 – 12:00 M. van Breemen, R. Evans Quaker Chemical BV, Uithoorn, The Netherlands Machining of Bi-Metal (Cast Aluminum-Ferrous Metal) Components
12:00 – 12:30 C. Hedoire Solvay, Aubervilliers, France Metal Cleaning: How to Select Cleaning Solutions for MWF and Rust Preventives ?
12:30 – 14:00 Break – Exhibition
28
10 Jan 2018 Wednesday
Morning Room C-8
Session:
Moleculardynamics
Chair:
M. Moseler Fraunhofer Institute for Mechanics of Materials (IWM), Freiburg, Germany
11:00 – 11:30 J. Ewen, H. Spikes, D. Dini Imperial College London, United Kingdom Effect of Confined Fluid Molecular Structure on Nonequilibrium Phase Behavior and Friction
11:30 – 12:00 K. Falk, D. Savio, M. Moseler Fraunhofer Institute for Mechanics of Materials (IWM), Germany Viscosity of Hydrocarbon Lubricants Under Extreme Pressures
12:00 – 12:30 U. Cihak-Bayr, S. J. Eder, C. Gachot AC2T research GmbH, Austria Molecular Dynamics Simulation as a Tool in Materials Tribology – Nanoabrasion & Nanosliding
12:30 – 14:00 Break – Exhibition
29
10 Jan 2018 Wednesday
Afternoon Room D-1
Session:
Bio Lubricants (2)
Chair:
R. Luther Fuchs Schmierstoffe GmbH, Mannheim, Germany
14:00 – 14:30 I. Minami, B. K. Sundararajan, M. Björling Luleå University of Technology, Luleå, Sweden Environmentally Acceptable Lubricants for Marine Applications
14:30 – 15:00 E. Tsesmeli, G. S. Dodos, F. Zannikos National Technical University of Athens, Zografos, Athens, Greece A Study on the Microbial Stability of Biobased Lubricants
15:00 – 15:30 A. Grigoriev, I. Kavaliova, N. Myshkin Metal-Polymer Resaerch Institute, Gomel, Belarus Degradation of Vegetable Oils at Boundary Friction
15:30 – 16:00 Break – Exhibition
30
10 Jan 2018 Wednesday
Afternoon Room D-2
Session:
Engine Tribology (1)
Chair:
M. Fox University of Bradford, United Kingdom
14:00 – 14:30 A. Boucke, G. Knoll, S. Umbach IST GmbH, Aachen, Germany S. Reichl BMW Steyr, Steyr, Österreich Wear Simulation of Conrod Bearings Considering Thermo-Elasto-Hydrodynamic Effects – Influence of Modelling Depth on Result Quality
14:30 – 15:00 I. Robolas, P. Nikolakopoulos University of Patras, Patras, Greece CFD Simulation of a Floating Ring Bearing and Ring Equilibrium Investigation
15:00 – 15:30 M. Nejadhamzeeigilani, A. Neville, A. Morina, S. Kosarieh Univesity of Leeds, United Kingdom Q. Zhou Changan UK R&D Centre Ltd, Birmingham, United Kingdom Gasoline Contamination in Engine Oil: Does it affect Tribology?
15:30 – 16:00 Break – Exhibition
31
10 Jan 2018 Wednesday
Afternoon Room D-3
Session:
Greases (2)
Chair:
S. Beyer-Faiss Dr. Tillwich GmbH Werner Stehr, Horb, Germany
14:00 – 14:30 M. Suzuki, T. Sasaki, Y. Takeichi Toyohashi University of Technology, Toyohashi, Japan Morita, R., Arakawa, K. Somic Ishikwa Inc., Hamamatsu. Japan Grease Lubrication Properties in Reciprocating Sliding for Textured Surfaces of POM
14:30 – 15:00 M. Fathi-Najafi Nynas AB, Nynäshamm, Sweden The Impact of the Naphthenic Oils on the Characteristics of the Conventional Lithium and Lithium Complex Greases
15:00 – 15:30 R. Westbroek, J. Leckner Axel Christiernsson International AB, Nol, Sweden Polypropylene – a Grease Thickener Technology for Energy Efficient Lubrication
15:30 – 16:00 Break – Exhibition
32
10 Jan 2018 Wednesday
Afternoon Room D-4
Session:
Rough Surfaces Contact Mechanics
Chair:
J. Müllers Robert Bosch GmbH, Renningen, Germany
14:00 – 14:30 N. Myshkin, A. Grigoriev Belarus National Academy of Sciences, Gomel, Belarus Scale and Spatial Factors in Tribology
14:30 – 15:00 G. Vorlaufer, A. Vernes, F. Franek AC2T research GmbH, Wiener Neustadt, Austria A Semi-Deterministic Model for the Contact Mechanics of Rough Surfaces
15:00 – 15:30 F. Stolz, P. Gumbsch, C. Greiner Karlsruhe Institute for Technology (KIT), Germany G. Richter Max Planck Institute for Intelligent Systems, Stuttgart, Germany Microstructural Changes in Copper under Tribological Loading as a Function of Hertzian Pressure
15:30 – 16:00 Break – Exhibition
33
10 Jan 2018 Wednesday
Afternoon Room D-5
Session:
Test Methods (1)
Chair:
A. Pauschitz AC2T research GmbH, Wiener Neustadt, Austria
14:00 – 14:30 T. Kamps, J. Walker, R. Wood, University of Southampton, United Kingdom P. Lee, South West Institute, San Antonio, USA G. Plint Phoenix Tribology Ltd, Kingsclere, United Kingdom Flake and Nodular Graphite Cast Iron Scuffing Mechanisms in a Lubricated Reciprocating Contact
14:30 – 15:00 J. Edtmayer, S. Walch, H. Hick TU Graz, Austria T. Wopleka,M. Jech AC2T research GmbH, Wiener Neustadt, Austria S. Lösch AVL List GmbH, Graz, Austria Combined Friction and Wear Analysis on Single Cylinder Test Engine
15:00 – 15:30 J. Rigo, P. Kovačócy Slovak University of Technology in Bratislava, Trnava, Slovak Republic Comparison of Tribological Test Rig Results Using Standardized and Diversified Test Methods
15:30 – 16:00 Break – Exhibition
34
10 Jan 2018 Wednesday
Afternoon Room D-6
Session:
Polymer Gears (1)
Chair:
J. Seabra INEGI, Porto, Portugal
14:00 – 14:30 B. Wetzel, Institut für Verbundwerkstoffe GmbH, Kaiserslautern, Germany E. Padenko Universität Kaisersdlautern, Germany Polybenzimidazole High Temperature Resistant Polymer for Severe Tribological Applications
14:30 – 15:00 A. Bormuth, J. Zuleeg, C. Schmitz, M. Pfadt, H. Meven Klüber Lubrication München SE & Co. KG, München, Germany Lubrication of Plastic Worm Gears
15:00 – 15:30 C. Fernandes, D. Rocha, R. Martins, L. Magalhães, J. Seabra INEGI, Porto, Portugal FEM Model to Predict Bulk Temperature on Polymer Gears
15:30 – 16:00 Break – Exhibition
35
10 Jan 2018 Wednesday
Afternoon Room D-7
Session:
Metalworking Fluids (4)
Chair:
C. Busch Westsächsische Hochschule Zwickau, Germany
14:00 – 14:30 F. Passman Biodeterioration Control Associates, Inc., Princeton, USA Metalworking Fluid Microbiology Basics Revisted
14:30 – 15:00 M. Bellini Bellini spa, Zanica, Italy Chemiometric Approach in Developing New Biostable Water Soluble MWFs
15:00 – 15:30 V. Aruta temixOleo, Mailand, Italy TemixOleo Sustainable and Renewable Bio-refinery: Bio-base Stocks in Metalworking Applications
15:30 – 16:00 Break – Exhibition
36
10 Jan 2018 Wednesday
Afternoon Room D-8
Session:
Gas Bearings
Chair:
M. Mayer Robert Bosch GmbH, Renningen, Germany
14:00 – 14:30 F. Al-Bender, M. Nabuurs, D. Reynaerts Katholieke Universiteit Leuven, Belgium Fabrication and Validation of a Flexible Tilting Pad Gas Bearing for High Speed Turbo Machinery
14:30 – 15:00 M. Nabuurs, F. Al-Bender, D. Reynaerts Katholieke Universiteit Leuven, Belgium On the Dynamic Stability of Flexible Tilting Pad Gas Bearings
15:00 – 15:30 M. Mahner, A. Lehn, M. Bauer, B. Schweizer Technical University Darmstadt, Germany Numerical and Experimental Investigations of Air Foil Journal and Thrust Bearings
15:30 – 16:00 Break – Exhibition
37
10 Jan 2018 Wednesday
Afternoon Room E-1
Session:
Bio Lubricants (3)
Chair:
R. Luther Fuchs Schmierstoffe GmbH, Mannheim, Germany
16:00 – 16:30 D. Karonis, G. S. Dodos. E. Manitara National Technical University of Athens, Zografos, Athens, Greece valuation of Hydrotreated Vacuum Gasoil and Hydrocracker Residue for Base Oils Production
16:30 – 17:00 R. Franz, B. Stojanovic, A. Grafl AC2t research GmbH, Wiener Neustadt, Austria K. Adam, B. Pertl Voestalpine Stahl GmbH, Linz, Austria Application-Oriented Oil Selection for Gas Holders – a Lab-to-Field Approach
17:15 Departure for Esslingen (Conference Dinner)
17:30 Bionic Performance, Festo AG & Co. KG
19:00 Conference Dinner
38
10 Jan 2018 Wednesday
Afternoon Room E-2
Session:
Engine Tribology (2)
Chair:
M. Fox University of Bradford, United Kingdom
16:00 – 16:30 G.Miiller, M. Manning, C. Williams, J. Evans, T. Selby Savant Laboratories, Midland, USA Development of an Updated Turbocharger Bench Test
16:30 – 17:00 C. Fang, X. Meng, Xie, Y. Shanghai Jiaotong University, China A New Technique for Measuring Friction of SI Engine Piston-Asssembly
17:15 Departure for Esslingen (Conference Dinner)
17:30 Bionic Performance, Festo AG & Co. KG
19:00 Conference Dinner
39
10 Jan 2018 Wednesday
Afternoon Room E-3
Session:
Greases (3)
Chair:
C. Specht Schaeffler Technologies AG & Co. KG, Schweinfurt, Germany
16:00 – 16:30 F. Alemanno, D. Veeregowda Ducom Instruments Europe B.V., Groningen, The Netherlands Friction and Wear Behavior of Greases and the Role of Surface Adhesion Force
16:30 – 17:00 D. Gonçalves, B. Graça, G. Herve, J.-L. Mansoux, J. Seabra INEGI, Porto, Portugal Tribological Study of Greases for Aeronautical Applications
17:15 Departure for Esslingen (Conference Dinner)
17:30 Bionic Performance, Festo AG & Co. KG
19:00 Conference Dinner
40
10 Jan 2018 Wednesday
Afternoon Room E-4
Session:
Surface Phenomena
Chair:
J. Müllers Robert Bosch GmbH, Stuttgart, Germany
16:00 – 16:30 K. Matsumoto Honda R&D, Haga-Machi, Japan Surface Damage under Tribological Conditions Induced by Electrical Discharge
16:30 – 17:00 A. Stratmann, J. Maneke, G. Jacobs RWTH Aachen Univeristy, Germany Correlation of Tribofilm Formation in Rolling Bearings and Tribometers
17:15 Departure for Esslingen (Conference Dinner)
17:30 Bionic Performance, Festo AG & Co. KG
19:00 Conference Dinner
41
10 Jan 2018 Wednesday
Afternoon Room E-5
Session:
Test Methods (2)
Chair:
A. Pauschitz AC2T research GmbH, Wiener Neustadt, Austria
16:00 – 16:30 S. Bill REWITEC GmbH, Lahnau, Germany Efficiency and Emissions Optimization of Combustion Engines by Silicon Coating
16:30 – 17:00 A. Schumann, S. Weise TriboPlast GmbH, Chemnitz, Germany Oscillating Tribology Test Bench for the Testing of Thermoplastic Friction Pairings
17:15 Departure for Esslingen (Conference Dinner)
17:30 Bionic Performance, Festo AG & Co. KG
19:00 Conference Dinner
42
10 Jan 2018 Wednesday
Afternoon Room E-6
Session:
Fundamentals of Tribology
Chair:
A. Fischer University of Duisburg-Essen, Germany
16:00 – 16:30 B. Zhmud Applied Nano Surfaces Sweden AB, Uppsala, Sweden A. Storz Applied Nano Surfaces GmbH, Erkrath, Germany Mechanochemical Surface Finishing: The Rehbinder Effect in Action
16:30 – 17:00 S. Fedorov Kaliningrad State Technical University, Kaliningrad, Russia Energy and Entropy Analysis of Machine as Supertribosystem
17:15 Departure for Esslingen (Conference Dinner)
17:30 Bionic Performance, Festo AG & Co. KG
19:00 Conference Dinner
43
11 Jan 2018 Thursday
Morning Room 1 P-3
Session:
Plenary Session (3)
Chair:
C. Wincierz Evonik Industries AG, Darmstadt, Germany
09:00 – 09:30 A. Fischer, P. Stemmer, D. Stickel University of Duisburg-Essen, Duisburg, Germany The Partition of Friction and Wear at Ultra-Mild Sliding Wear under Boundary Lubrication
09:30 – 10:00 J. Seabra, B. Graça, C. Fernandes, D. Gonçalves, J. Brandão, P. Marques, R. Martins INEGI, Porto, Portugal GEAR LUBRICATION: Testing, Friction and Efficiency of Wind Turbine and Automotive Gearboxes
10:00 – 10:30 M. Pfadt, M. Wiesböck, S. El Allam, M. Kuhn Klüber Lubrication München SE & Co. KG, München, Germany Hydro Lubrication: The Future of Lubricants is Based on Water
10:30 – 11:00 Break – Exhibition
44
11 Jan 2018 Thursday
Morning Room F-1
Session:
Additives (1)
Chair:
M. Fathi-Najafi Naphtenics Tech DMS, Nynäshamm, Sweden
11:00 – 11:30 M. Fazakerley, D. Gillespie Croda, Goole, United Kingdom Friction and Wear Performance of Novel Organic Fricion Modifiers of DLC Surfaces
11:30 – 12:00 D. Gillespie Croda, Goole, United Kingdom The Influence of Friction Modifiers in Fully Formulated Motorcycle Oils
12:00 – 12:30 M. Rodriguez Ripoll, V. Totolin AC2T research GmbH, Wiener Neustadt, Austria A. Tomala ITEE, Institute for sustainable technologies, Radom, Poland M. Remskar Institute Jozef Stefan, Ljubljana, Slovenia Interaction Between MoS2 Nanotubes and Additives in Model Oils: Application to Thread Forming
12:30 – 14:00 Break – Exhibition
45
11 Jan 2018 Thursday
Morning Room F-2
Session:
Engine Tribology (2)
Chair:
M. Fox University of Bradford, United Kingdom
11:00 – 11:30 J. Walker, T. Kamps, J. Mitchell-Smith, J. Lam, A. Clare University of Southampton, United Kingdom Friction and Wear Behaviour of a Textured Al-Si Cylinder Liner for Automotive Applications
11:30 – 12:00 P. Dellis ASPETE, Athens, Greece Friction in a Test Rig and the Effect of Cavitation on Ring Load Capacity and Pressure Profile
12:00 – 12:30 P. Mishra IIT Madras, Chennai, India Improving Tribological Performace of PRCL System Using Micro Dimples
12:30 – 14:00 Break – Exhibition
46
11 Jan 2018 Thursday
Morning Room F-3
Session:
Condition Monitoring
Chair:
R. Krethe Oelcheck GmbH, Brannenburg, Germany
11:00 – 11:30 S. Bots Oelcheck GmbH, Brannenburg, Germany Handling of Oil Analysis Data – Opportunities and Challenges of Big Data and Industry 4.0
11:30 – 12:00 C. Heine Oelcheck GmbH, Brannenburg, Germany Oil Monitoring of Natural Gas Engines Considering the Possibility of Bio Methane
12:00 – 12:30
12:30 – 14:00 Break – Exhibition
47
11 Jan 2018 Thursday
Morning Room F-4
Session:
Gearbox
Chair:
J. Seabra INEGI, Porto, Portuga
11:00 – 11:30 T. Lohner, K. Stahl Technical University Munich, Germany M. Hinterstoißer Technical University Munich (formarly), München, Germany Minimising Load-Dependent Gear Losses
11:30 – 12:00 C. Mielke, O. Herz Merkle & Partner GbR, Heidenheim, Germany Simulation of the Gear Oil Distribution in a 7-Speed Transmission
12:00 – 12:30 P. Marques, R. Martins, J. Seabra INEGI, Porto, Portugal Constant Mesh Stiffness Gears for Smooth Operation
12:30 – 14:00 Break – Exhibition
48
11 Jan 2018 Thursday
Morning Room F-5
Session:
Tribological Testing
Chair:
M. Jungk MJ Tribology, Geisenheim, Germany
11:00 – 11:30 A. Frick, V. Muralidharan Aalen University, Germany Investigation of the Dynamic Tribological Contact Behavior of Polymeric Materials
11:30 – 12:00 S. Abdel-Wahed, C. Koplin, R. Jäger, M. Scherge Fraunhofer Institute for Mechanics of Materials (IWM), Freiburg, Germany On the Transition from Static to Dynamic Boundary Friction Studied by Oscillatory Tribometry
12:00 – 12:30 S. Beyer-Faiss Dr. Tillwich GmbH Werner Stehr, Horb, Germany Determination of Adhesive Properties of Lubricants on Surfaces
12:30 – 14:00 Break – Exhibition
49
11 Jan 2018 Thursday
Morning Room F-6
Session:
Materials
Chair:
D. Paulkowski Fraunhofer IFAM, Bremen, Germany
11:00 – 11:30 T. Coors, F. Pape, G. Poll Leibniz Universität Hannover, Germany Enhancing Machine Elements by Residual Stresses, Optimized Surfaces and Tailored Forming
11:30 – 12:00 P. Schreiber, J. Schneider, C. Bucharsky, G. Schell, M. Hoffmann Karlsruhe Institue of Technology, Karlsruhe, Germany Tribology of Laser Textured Si-Ceramics Regarding the Use in High Pressure Pumps for GDI-Motors
12:30 – 14:00 Break – Exhibition
50
11 Jan 2018 Thursday
Morning Room F-7
Session:
Coatings (1)
Chair:
A. Gies Oerlikon Surface Solution AG, Balzers, Liechtenstein
11:00 – 11:30 V. Weihnacht, S. Makowski, A. Leson Fraunhofer IWS, Dresden, Germany The Role of Water on Friction and Wear of Hard Amorphous Carbon Coatings
11:30 – 12:00 R. Montelimard Hef Durferrit, Andrezieux Boutheon, France The latest PVD Coatings and Investigations on Piston Pins for Internal Combustion Engines
12:00 – 12:30 H. Yuan, J. Song, V. Schinow Ostwestfalen-Lippe University of Applied Sciences, Lemgo, Germany Comparison of the Wear Performance of Gold Coatings with and without Nickel Underlayer
12:30 – 14:00 Break – Exhibition
51
11 Jan 2018 Thursday
Afternoon Room G-1
Session:
Additives (2)
Chair:
C. Wincierz Evonik Industries AG, Darmstadt, Germany
14:00 – 14:30 K. Komori, G. Fujimoto, T. Tsukamoto Honda R&D Co., Ltd., Tochigi, Japan Tribological Approach to Friction Reduction of Magneto-Rheological Shock Absorber Unit
14:30 – 15:00 M. Ratoi, L. Lokuwithana University of Southampton, Southampton, United Kingdom Smart Electromagnetically Responsive Nanoadditized Lubricants
15:00 – 15:30 P. Pyka Keim Additec Surface GmbH, Kirchberg, Germany Wax as Additives in Lubricants
15:30 – 16:00 V. Koch, J. Kopp Robert Bosch GmbH, Stuttgart, Germany D. Bartel Otto-von-Guericke-Universität, Magedeburg, Germany Tribooxides in Steel-Diesel-Contact – How do they Influence Wear?
16:00 – 16:15 Short Break
52
11 Jan 2018 Thursday
Afternoon Room G-2
Session:
Axle Fluids and Hydraulic
Chair:
M. Alibert Evonik Resource Efficiency GmbH, Darmstadt, Germany
14:00 – 14:30 R. C. Martins, J. Seabra, C. M. C. G. Fernandes, M. Hammami INEGI, Porto, Portugal Axle Gear Oils: Friction under Full, Mixed and Boundary-Film Lubrication Regimes
14:30 – 15:00 D. Shakhvorostov, R. Kolb Evonik Oil Additives GmbH, Darmstadt, Germany Theory and Reality of Efficiency Improvements with Hydraulic Fluids
15:00 – 15:30 S. Asadauskas, A. Strakšys, D. Bražinskienė FTMC, Vilnius, Lithuania Long-term Degradation of Thin Films of Engine Oils and Hydraulic Fluids
15:30 – 16:00 L. Mirci, L. Bogatu University Politehnica Timisoara, Romania Synthetic Complex Malonic Esters as Eco-Friendly Lubricants
16:00 – 16:15 Short Break
53
11 Jan 2018 Thursday
Afternoon Room G-3
Session:
Condition Techniques
Chair:
R. Krethe Oelcheck GmbH, Brannenburg, Germany
14:00 – 14:30 T. Woldert, C. Martin, P. Koldehoff Visiolytics, Hamburg, Germany Machine Vision as a Measurement Procedure for Condition-Monitoring
14:30 – 15:00 S. Eiden, S. Feldhoff Oel-Waerme-Institut gGmbH, Herzogenrath, Germany C. Müller Hochschule Mannheim, Germany Development of Fast Screening Method of Greases Based onDifferent Chemical Analysis via Determination of ReactionKinetic
16:00 – 16:15 Short Break
54
11 Jan 2018 Thursday
Afternoon Room G-4
Session:
Journal Bearings
Chair:
N. Nagler Bosch Rexroth AG, Elchingen, Germany
14:00 – 14:30 C. Greiner Karlsruhe Institue of Technology, Karlsruhe, Germany Laser Surface Texturing: Bio-Inspired Scale-Like Surfaces and their Tribological Properties
14:30 – 15:00 A. Burya, Y Yeriomina Dnipovsk State Technical University, Kamyanske, Ukraine S. Amelina National Universioty of Life and Environmental Science of Ukraine, Kiev Study of Wear Resitance of Metal-Containing Polymers based on Aromatic Polyamide
15:00 – 15:30 A. Burya, O. Naberezhna Dnipovsk State Technical University, Kamyanske, Ukraine S. Amelina National Universioty of Life and Environmental Science of Ukraine, Kiev Research of Tribological Characteristics of Self-Reinforced Organoplastics based on Phenylon
16:00 – 16:15 Short Break
55
11 Jan 2018 Thursday
Afternoon Room G-5
Session:
Coating Testing
Chair:
V. Weihnacht Fraunhofer IWS, Dresden, German
14:00 – 14:30 E. Georgiou, D. Drees, H. van Hest Falex, Rotselaar, Belgium G. Timmermans Tennesco, Slint-Truiden, Belgium Replacing Hard Chromium in Industrial and Automotive Applications by Sound Tribological Approach
14:30 – 15:00 R. Bajwa, M. Anand, I. Tudela, R. Verbickas, Y. Zhang Daido Metal Co. Ltd, The European Technical Centre (UK), Ilminster, United Kingdom Friction and Wear Evaluation of Lead-Free Tin Based Coatings Using Ball-On-Disc Tribotester
15:00 – 15:30 M. Hadad Nova Werke AG, Effretikon, Switzerland The Challenge of the Erosive Wear Evaluation of Thermally Sprayed Coatings
15:30 – 16:00 K. Basit National University of Sciences and Technology (NUST), Islamabad, Pakistan H. Shams DHA Suffa University (DSU), Karachi, Pakistan M. A. Khan Cranfield University, Cranfield, United Kingdom S. Saleem NUST, Islamabad, Pakistan Scratch Testing to Determine Abrasion Resistance in Commercial Oleophobic Coatings using Non-Contact Technique for Aerospace Applications
16:00 – 16:15 Short Break
56
11 Jan 2018 Thursday
Afternoon Room G-6
Session:
Materials and Solid Lubricants
Chair:
N. Nagler Bosch Rexroth AG, Elchingen, Germany
14:00 – 14:30 A. Merstallinger Aerospace & Advanced Composites GmbH, Wiener Neustadt, Austria Lubrication in Space is Solid
14:30 – 15:00 S. Poersch, J. Bai-Cheng, B. Sauer, B. Wetzel University of Kaiserslautern, Germany S. Emrich, M. Kopnarski Institute for Surface and Thin Film Analysis GmbH, Kaiserslautern Friction and Wear Mechanism of Materials for Solid Lubricated Rolling Bearings
15:00 – 15:30 Y. Takeichi, K. Mishima, Y. Sugawara, A. Kubota Toyohashi University of Technology, Toyohashi, Japan T. Inoue, K. Asai Asahi Yukizai Corpoaration, Tokyo, Japan Improvement of Wear Resistance of Phenolic Resin Composite by Boric Acid Addition
15:30 – 16:00 R. Narasimha Rao, S. C. Chadalawada National Institute of Technology, Warangal, India Tribological Behaviour of Aluminium Syntactic Foams under Dry and Lubricated Conditions
16:00 – 16:15 Short Break
57
11 Jan 2018 Thursday
Afternoon Room G-7
Session:
Coatings (2)
Chair:
M. Woydt BAM Federal Institute for Material Research and Testing, Berlin, Germany
14:00 – 14:30 M. Woydt, R. Wäsche, R. Ehrke, G. Brandt BAM Federal Institute for Material Research and Testing, Berlin, Germany S. Sasaki, S. Yano Tokyo University of Science, Tokyo, Japan Tribology in Hot Steam for Energy Recovery
14:30 – 15:00 F. Seibert, J. Ramm, B. Widrig Oerlikon Surface Solutions AG, Balzers, Liechtenstein C. Bohnheio, P. Ernst, P. Luethy Oerlicon Metco AG, Wohlen, Switzerland Optimization of the Tribological Contact between Piston Ring and Liner using Oxide Coatings
15:00 – 15:30 G. Mishev, C. Pashinski, L. Kolaklieva Technical University Sofia, Branch Plovdiv, Plovdiv, Bulgaria V. Rupetsov Paisii Hilendaski University of Plovdiv, Smolyn, Bulgaria S. Dishliev University of Food Technologies, Plovdiv, Bulgaria M. Angelov Milko Angelov Consulting Co., Plovdiv, Bulgaria Tribomechanical Study of a Ti/TiN/TiCrCN/(CrCN/TiCN)n Coating Deposited on WC-Co Alloy
15:30 – 16:00 J. Ahmed, M. Ghulam, M. Ghufran, M. Jawad, N. Hayat UET Lahore, Lahore, Pakistan M. Irfan Pitmaem Pcsir Labs, Lahore, Pakistan Investigation of Low Temperature PVD Based TiN Coatings for Diesel Engine PRCL Interface
16:00 – 16:15 Short Break
58
11 Jan 2018 Thursday
Afternoon Room 1 P-4
Session:
Plenary (4)
Chair:
T. Gradt BAM Federal Institute for Material Research and Testing, Berlin, Germany
16:15 – 16:45 T. Brandenburg BGR, Berlin, Germany Skyrocketing E-Mobility – Challenge for the Supply of Raw Materials?
16:45 – 17:00 M. Bäse Magna Powertrain GmbH & Co. KG, Lannach, Austria R. Drafz KS Gleitlager GmbH, Leon-Rot, Germany H. Buse University of Applied Sciences Mannheim, Germany J. T. Terwey Leibniz Universität Hannover, Germany F. Rummel Anton Paar Germany GmbH, Ostfildern, Germany How Tribology grows - Activities of the German Young Tribologists
17:00 Farewell Party
59