9ft & 10ft Wagon Kits

©17D LTD

17D LTDUNIT 13VIA GELLIA MILLDE4 2AJ01629 825070

Wagon Chassis

1x9ft and 10ft Fret

2xDummy Brake Fret

1xPre Folded Frame

2xBuffer Beam

2xSide Frames

2xHook on Chain

2xWheel on Axle

4xAxle box

4xBearings

4xRCH Buffer Heads + Pins

4xRCH Buffer Stock

4xRCH Buffer Springs

4xSuspension Spring

Cut out required parts:A = 10ft onlyB = 9ft onlyC = RequiredD = RequiredE = RequiredF = 9ft onlyG = 9ft onlyH = 10ft onlyI = 10ft onlyJ = RequiredK= Choice

L = 10ft onlyM = 9ft only

1

2xBuffer Beam

2xSide Frames

2xDraw Hook Pads

Recommended to use pliers to bend

small tabs.

4xRCH Buffer Stock

Rivet into place.1/16 x 3/16 rivetsrecommended.

Bolt Together.2MM bolts

recommended.

2

Recommended to use pliers to bend

small tabs.

2xDummy Brake Fret

4xLeaf Spring

2xHook on Chain

Bolt Together.2MM bolts

recommended.

4xRCH Buffer Heads + Pins

4xRCH Buffer Springs

4xFolded Buffer Keep

Bolt Together.2MM bolts

recommended.

3

4

2xPin Rack

2xBrake Lever

Bolt Together.2MM bolts

recommended.

Recommended to use pliers to bend

to fit.

5

Bolt Together.2MM bolts

recommended.

Push together Wheel assembly

Put spring in place first

followed by axle box assembly then axle keep last.

!

2xWheel on Axle

4xAxlebox, bearings

and springs

2xAxle Keeps

(Choice: short or long)

5

Bolt Together.2MM bolts

recommended.

Push together Wheel assembly

Put spring in place first

followed by axle box assembly then axle keep last.

!

2xWheel on Axle

4xAxlebox, bearings

and springs

2xAxle Keeps

(Choice: short or long)

17D LTDUNIT 13VIA GELLIA MILLDE4 2AJ01629 825070 ©17D LTD

Planked Wagon Kit

Planked Versions:

1xWooden Base

2xWooden Front and back

1xStrapping Fret:

5 Plank or 7 Plank

4xStrapping Folded Corner:

5 Plank or 7 Plank

2xWooden Sides

1

1xWooden Base

2xWooden Sides and fronts

4xFolded Corners

Glue woodenSections to form

box

Sides may needFiling for proper fit

!

Drill out holes andFit bolts to fit

strapping

1xStrapping Fret

2

Drill out holes andFit bolts toassemble

And Enjoy!

Tippler and Sand Wagons

Tippler and Sand Wagons

1xWelded Together

Body

8xShort Stanchions

4xLong Stanchions

4xFolded Corners

1

Bolt Together.3MM x 6MM bolts

recommended.

1xWelded Together

Body

8xShort Stanchions

4xLong Stanchions

Drill out holes andFit bolts to

Assemble to chassis

4xLong Stanchions

Bolt Together.2MM bolts

recommended.

Banana Box Van Kit

Banana Box Van Kit

1xStrapping Fret:5in Banana Van

2xWooden Ends

2xWooden Sides

1xWooden Base

2xWooden Roof

inlays

4xLaser cut and

Folded end pieces

1xFolded C section

1xFolded Roof

12xCast brassBrackets

2x3MM DiaDoor Bars

1

Glue woodenSections to form

box

2xWooden Ends

2xWooden Sides

1xWooden Base

2

1xStrapping Fret:5in Banana Van

4xLaser cut and

Folded end pieces

12xCast brassBrackets

2x3MM DiaDoor Bars

Drill out holes andFit bolts to fit

strapping

Sides may needFiling for proper fit

!

3

2xWooden Roof

inlays

1xFolded C section

First glue these3 pieces together asas an sub-assembly

before glueing itInside.

!

GlueAssembly inside

Box van

4

Counter sunkBolt Together.

3MMrecommended.

Drill out holes andFit bolts to fit

strapping

1xFolded Roof