9x modification tutorial part 2

8/12/2019 9x Modification Tutorial Part 2

1/5

enough of spending.

The software

Here you can find drivers for you programming device USBAVR

http:code.goog!e.comper"#down!oadsdetai!$name%USBasp&win&driver'(()&

ia()&v*.+.).,ip-can%+-%Here you can find the !ist of fi!es of one of the avai!a/!e firmwares in he# fi!es

http:code.goog!e.comper"#

0!atest /inaries 0the !atest versions1&sta/!e /inaries 0the very tested ones112

a !ist with a!most a!! the pdf fi!es for informations and !in3s to associated movements

in modification2 04ust as this one you read now2 as 5 6ve made it to have the most of them in one

p!ace12

and the rest of the avai!a/!e progrmamms 0!eft side of the page1

Have in mind that different names of versions in 7R"# means support for different

te!emetry modu!es

#NOHT- do not show the heli & template menu's

#FRSKY- used if you have modified your radio to receive frsky

telemetry

#JETI- used if you have modified your radio to receive jeti

telemetry

#NMEA- used if you have modified your radio to receive NMEA gps data

#ARDUPILOT- used if you have modified your radio to receive

ardupilot data

7R"#7R"#&89HTStandard version for your "# radio

7R"#&RS;U?5@9T7R"#&AR>U?5@9T&89HT7R"#&87A7R"#&87A&89HT

or 87A ?S systems

.

And a/out firmware$$

The mentioned 7R"C that was origina!y for3ed from the origina! TH"C code and

th"#

radioc!one an indipendant programm created /y some ?o!ish creator not

supporting te!emetry /ut instead is the most powerfu!! programm 0cons no te!emetry&

need e#terna! memory 1 SV*"

gruvin"# the gruvin"# pro4ect was origina!!y for3ed from E!"

hat$s the difference%%%

ell all of them had their common roots ut it depending on your

like( to make the est choice)

* found some ug( trying the gruvin!+, his does$t mean that this is

going to happen to you also, * had a prolem using the MEN. utton

occasionly

And 5 cou!dnDt find the >7@7T7 order in the mode! editor menu.

y choice is definite!y the 7R"C&RS;< giving te!emetry capa/i!ities and some

more genera! options in main setup menu !i3e sound ua!ity from the modified

spea3er and some more.
http://code.google.com/p/er9x/downloads/detail?name=USBasp-win-driver-x86-x64-ia64-v1.2.4.zip&can=2&qhttp://code.google.com/p/er9x/downloads/detail?name=USBasp-win-driver-x86-x64-ia64-v1.2.4.zip&can=2&qhttp://code.google.com/p/er9x/http://er9x.googlecode.com/svn/trunk/er9x.hexhttp://er9x.googlecode.com/svn/trunk/er9x-noht.hexhttp://er9x.googlecode.com/svn/trunk/er9x-noht.hexhttp://er9x.googlecode.com/svn/trunk/er9x-frsky.hexhttp://er9x.googlecode.com/svn/trunk/er9x-frsky-noht.hexhttp://er9x.googlecode.com/svn/trunk/er9x-jeti.hexhttp://er9x.googlecode.com/svn/trunk/er9x-jeti-noht.hexhttp://er9x.googlecode.com/svn/trunk/er9x-ardupilot.hexhttp://er9x.googlecode.com/svn/trunk/er9x-ardupilot-noht.hexhttp://er9x.googlecode.com/svn/trunk/er9x-ardupilot-noht.hexhttp://er9x.googlecode.com/svn/trunk/er9x-nmea.hexhttp://er9x.googlecode.com/svn/trunk/er9x-nmea-noht.hexhttp://er9x.googlecode.com/svn/trunk/er9x-nmea-noht.hexhttp://code.google.com/p/th9x/http://radioclone.sourceforge.net/http://forum.rcdesign.ru/f8/thread182549.html#post1840751http://code.google.com/p/gruvin9x/http://code.google.com/p/er9x/downloads/detail?name=USBasp-win-driver-x86-x64-ia64-v1.2.4.zip&can=2&qhttp://code.google.com/p/er9x/downloads/detail?name=USBasp-win-driver-x86-x64-ia64-v1.2.4.zip&can=2&qhttp://code.google.com/p/er9x/http://er9x.googlecode.com/svn/trunk/er9x.hexhttp://er9x.googlecode.com/svn/trunk/er9x-noht.hexhttp://er9x.googlecode.com/svn/trunk/er9x-frsky.hexhttp://er9x.googlecode.com/svn/trunk/er9x-frsky-noht.hexhttp://er9x.googlecode.com/svn/trunk/er9x-jeti.hexhttp://er9x.googlecode.com/svn/trunk/er9x-jeti-noht.hexhttp://er9x.googlecode.com/svn/trunk/er9x-ardupilot.hexhttp://er9x.googlecode.com/svn/trunk/er9x-ardupilot-noht.hexhttp://er9x.googlecode.com/svn/trunk/er9x-nmea.hexhttp://er9x.googlecode.com/svn/trunk/er9x-nmea-noht.hexhttp://code.google.com/p/th9x/http://radioclone.sourceforge.net/http://forum.rcdesign.ru/f8/thread182549.html#post1840751http://code.google.com/p/gruvin9x/


2/5

8o /ugs found ti!! now and 5Dm very satisfied of this firmware. A!so the radioc!one is

a very strong firmware /ut so far it doesnDt giving te!emetry capa/i!ities and there is

no 7ng!ish user manua! 0yet1.

a3e your choice and moove

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&

8ow in the wor3shop fo!3s

irst open the /ac3 case of your t# ta3ing care to the wire connecting the /oard to the

modu!e.

=ust unp!ag it from the /oard.

Attention:

A!! the ne#t mentioned modifications can /e 4umped off2 if you intend to ma3e on!y

the firmware upgrade connections2 without the te!emetry use. 5n that case the on!y

needed act is that in photo.

5 suggest you that /efore starting get thin3 of the difficu!ty in so!dering connections to

the chipDs pins.EEEE5t is a very de!icate 4o/ so if you are not sure a/out your capa/i!ities2 you have

pro/!em in your vision2 you have not enough or not appropriate too!s or at !east you

are not definat!y determined to do this ..>98DT TR< 5TE

Any way2 one of the /est thin3s with this 3ind of radio contro! is that you can easi!y

find a rep!acement main /oard and even a pro&modified one to change your destroyed

one here : http:gruvin"#.comshop
http://gruvin9x.com/shophttp://gruvin9x.com/shop


3/5


4/5

PLAN YOUR MOVEMENTS

irst you must prepair the T#d wire from the RS++ /oard to 9S5 in main /oard.

That needs a resistor to /e p!aced /etween connections.

As you can see in the wiring diagram this is a *I;ohm resistor 0red&/!ac3&orange1

The common connections are:

*. AVR with S> card /oard to ain t# /oard 0if you intend to use S> card /oard1

VccJKV2 8>2 F@; 0a!so ca!!ed S@;1

+. AVR with RS++ /oard to ain t# /oard

9S52 5S9

. S> /oard with * of the ain /oard /ypass fine wires to pin )+ at the uper side

of the AT7@() chip 0if you intend to use S> card /oard1

5f no Sd card is going to /e used the on!y common connections are the RS++ - AVR

to main /oard 5S9 - 9S5.

So you have to create the termina!s of these wires 0as the picture in my diagram1 for easy

and safety we!dings.

The /ypass connections are nessecary to /e using the thic3 fine wire2 cause the )*&)+

pins of the processor

are too de!icate and reuiring c!ose attention on we!ding to avoid shorting them with

the neigh/oring ones.

0you can see them in the photo on the !eft !ow side of the diagram facing to the !eft2 /een shorted

together /y heat shring tu/e in red with the + sma!! ends2 appearing at the !eft side1.

Here is a diagram Ive made to get in mind the common in!s and have an icon

o" them.

Be!ieve me it is very usefu!! trying to ma3e the connections and in many cases you are

too confused a/out.


5/5

9x modification tutorial part 2

Documents