a breath sky h i g h of fresh air - agriculture –...

sky higH

DW20500KS Diesel driven 2" water transfer pump – 1,500 L/min

DD20500KS Diesel driven 2" diesel transfer pump – 1,500 L/min

2" DIESEL DRIVE - WATER & DIESEL TRANSFER ENGINE PUMPS

DW301000KS Diesel driven 3" water transfer pump – 1,000 L/min

DD301000KS Diesel driven 3" diesel transfer pump – 1,000 L/min

3" DIESEL DRIVE - WATER & DIESEL TRANSFER ENGINE PUMPS

Alemlube diesel and petrol engine pumps deliver water and diesel on site, on demand. The extensive range of water and diesel transfer pumps from Alemlube has all your pumping requirements covered.

The new Alemlube petrol and diesel driven transfer pumps are specifically designed and manufactured for the transfer of diesel fuel, petrol and water. The robust transfer pumps suit many industrial, workshop, agricultural, municipal, marine services, fire fighting and on construction site applications.

DWFF301000KS Diesel driven 3" water transfer pump – 630 L/min

DWFF20500KS Diesel driven 2" water transfer pump – 460 L/min

DIESEL DRIVE - FIRE FIGHTING ENGINE PUMPS

PW15300 Petrol driven 1-1/2" water transfer pump – 300 L/min

PD15300 Petrol driven 1-1/2" diesel transfer pump – 300 L/min

1-1/2" PETROL DRIVE - WATER & DIESEL TRANSFER ENGINE PUMPS

A Breath of Fresh Air

Applies to the vast majority of Alemlube products

value specials

$2,223.00

• 3.8HP air cooled 4-stroke diesel engine • Run time (per tankful) at 3/4 load of 2.0 hours • Key start ignition


• 2.4HP air cooled 4-stroke diesel engine • Run time (per tankful) at 3/4 load of 1.5 hours • Pull start ignition


SINCEI970

$2,879.00

$1,629.00

$1,736.00

$1,829.00

$1,947.00

$462.00

$492.00

Until 31 July 2015


HOSE REEL STORAGE & RetrIeva

l

• Easy and quick mounting• Lifetime warranty on the hose guide assembly and latch pawl spring• Sealed spring cassette and sealed and plated bearings• Convenient narrow width

8080-G High capacity reel, 15m x 25mm ID hose

8080-F High capacity reel, 25m x 19mm ID hose

ALEMITE HEAVY DUTY AIR, WATER, OIL & FUEL HOSE REELS

• Heavy duty double pedestal full metal construction• Seven position outlet mount• Large effective radial latching area for easier operation • Special fatigue resistant steel spring for years of durable performance

505224N Open reel, 15m x 19mm ID hose

505232 Open reel, 20m x 12mm ID hose

SAMOA HEAVY DUTY AIR, WATER, OIL & FUEL HOSE REELS

• Robust construction with corrosion resistant aluminium covers• Full port nickel protected steel shaft facilitates max possible flow rates• Fatigue resistant steel spring for longevity• Can be wall, ceiling, floor or tank mounted

507222 Covered standard duty reel 15m x 12mm ID

507121 Covered standard duty reel 15m x 10mm ID

507421 Covered high pressure hose down reel 15m x 10mm

SAMOA COVERED AIR & WATER HOSE REELS

• Robust construction heavy gauge powder coated steel• Suitable for floor, workbench, wall and mobile applications• Full flow brass swivel ensures maximum product delivery• Maximum operating pressure of 3,000psi (207bar)

H12060 Economy hand rewind hose reel, 12m ID x 20m hose

H12220 Economy hand rewind hose reel, 12m ID x 75m hose

AIR & WATER HAND REWIND HOSE REELS

• 117-5-100 working pressure of up to 4000psi (276bar) • 1185-15-24 working pressure of up to 600psi (41bar)

117-5-100 High perfomance, 30m ID x 19m hose

1185-1524 Heavy duty, 22m ID x 38m hose

HAND REWIND HOSE REELS

117-5-100

1185-1524

$2,896.00

$3,093.00

$2,178.00

$2,077.00

$1,138.00

$1,165.00

$1,165.00

$2,395.00

$1,118.00

$203.50

$316.00

HOSE REEL STORAGE & RetrIeva

l

• Impact resistant UV stabilised covers• Working pressure of 300psi (20bar)• New hybrid polymer hose is more flexible, easier to handle

and longer lasting• High flow swivel and fluid path• Adjustable spring tension

SA300N 18m x 10mm ID hose & 0.9m lead in hose, 3/8" BSP(f) inlet & outlet

SA400N 15m x 12mm ID hose & 0.9m lead in hose, 1/2" BSP(f) inlet & outlet

S SERIES AIR HOSE REELS

• Impact resistant UV stabilised covers for maximum durability• Automatic and positive latching mechanism• Detachable steel mounting bracket enables 180º hose reel rotation• SO600 ideal for back of UTE or service vehicle mobile use

SGRW510 Domestic garden reel, 16m x 12mm ID hose & 0.9m lead in hose

SO600 Oxy-Acetylene reel, 15m x 6mm ID hose & 0.9m lead in hose

S SERIES WATER & OXY-ACETYLENE HOSE REELS

• Impact resistant UV stabilised covers for maximum durability

SOI700 Oil hose reel, 10m x 12mm ID hose & 0.9m lead in hose

SG800 Grease hose reel, 10m x 6mm ID hose 0.9m lead in hose

S SERIES OIL AND GREASE HOSE REELS

AWS812 • Moulded steel and electrostatically painted covers• Ideal for industrial or production line applications• WP1290 • Durable impact and weather resistant covers• Positive latching system locks the hose at the desired length

AWS812 Air & water hose reel, 12m x 8mm ID hose

WP1290 Large Capacity water hose reel, 30m x 12mm ID hose

HEAVY DUTY HOSE REELS

$000.00

$244.60

$266.60

SO600 $441.00

SG800 $311.00

WP1290 $305.00

SOI700 $393.00

AWS812 $558.00

SGRW510 $217.10


lubricant transfer EQUIPMENT an

d workshop lighting

• 8828N2 Delivers 110mL on downstroke• 10028 Delivers 170mL on the downstroke• 454111N Delivers up to 15 L/min

8828N2 20L Gear Oil Drum Pump

10028 Heavy Duty, 20L Gear Oil Drum Pump

454111N Oil Transfer Kit with On/Off Gun

GEAR OIL DRUM PUMPS

• Facilitates easy lubrication of pins and bushes, roller bearings and chains

• Features an effective all metal force feed pump mechanism

• High gloss paint finish

7340A 500mL capacity with flexible extension

7330 375mL capacity with flexible extension

7320 250mL capacity with flexible extension

5340 500mL capacity with rigid extension



FORCE FEED OIL CANS

• Ideal for the draining and filling of diffs, gear boxes and engine blocks

• A double ’V’ packing ensures that oil does not leak through the rear of the gun

21040 530mL capacity

21041 775mL capacity

OIL SUCTION GUNS

20022 240 & 12V Rechargeable

20044N 240 & 12V Rechargeable

LED CORDLESS WORKSHOP LIGHTS

• Ideal for topping up engines, gear boxes, transmissions and differentials• Spring operated pump and lever action control valve facilitates semi automatic

lubricant and ATF transfer• Robust zinc pump head assembly and ground shafts with O’Ring seals ensure

long working life

9978 60L Lubricant drum pump with hose. Delivery per stroke 500mL

9928 20L Lubricant drum pump with hose. Delivery per stroke 330mL

9976 60L ATF drum pump with hose and filter. Delivery per stroke 500mL

9926 20L ATF drum pump with hose and filter. Delivery per stroke 330mL

60L & 20L DRUM PUMPS

$10.40

$10.10

$10.00

$9.60

$9.50

$9.20$51.70

$67.30

9978 $152.20 20022

$140.40

20044N $154.30

9928 $160.70

9976 $160.00

9926 $173.60

8828N2 $43.10

454111N $963.00

10028 $118.20

lubricant transfer EQUIPMENT an

d workshop lighting

• 3:1 ratio pump, 3m x 1/2" ID hydraulic hose and electronic resettable meter

• 3/4" BSP(f) material outlet 1/4" BSP(f) air inlet • Suitable for engine, gear, diff and hydraulic oils• Suits 60L or 205L drums

454110N Flow rates of up to 12 L/min

OIL TRANSFER KIT WITH METER

• Includes 4 heavy duty casters, 75mm diameter • Provides a convenient and easy means of

moving 205L drums around a workshop, warehouse or production facility

• Industrial quality steel construction• Reduces the physical effort of drum handling

and provides a safer working environment

80100 Industrial quality steel construction

205L DRUM TROLLEY

• 240V flow 50Hz single phase motor• 1" BSP(f) inlet & outlet threads• Suitable for pumping high viscosity oil

561611 Flow rates of up to 70 L/min

240V OIL TRANSFER PUMP

• Operating pressures up to 70psi (5bar)• Flow rates of up to 10 L/min• 3/4” BSP(f) inlet and outlet


12V OIL TRANSFER TANK PUMP

• Supplied with 3:1 air operated oil pump, 8m hose reel, electronic meter and heavy duty drum trolley

• Electronic oil meter accurate to ± 0.5• Quick, efficient and effortless oil transfer

in car, light commercial vehicle and truck workshops

378100N Adjustable flow rates up to 25 L/min

MObILE OIL TRANSFER KIT

• Includes a 3:1 ratio drum pump, 10m hose reel, electronic meter and a 2m pump to hose reel connection hose

• Dual pedestal hose reel withstands angular hose pull

• Electronic resettable oil meter is powered by easy to replace AAA batteries

• 3:1 ratio pump suits 205L drums

454600N Adjustable flow rates of up to 10 L/min

STATIONARY OIL PUMP, REEL AND METER KIT

• 3:1 ratio pump facilitates flow rates of up to 18 L/min• Unit includes a 1,000L IBC container, 3:1 ratio pump,

hose reel inclusive of 10m of hose, a side mounting bracket and an electronic oil meter

• Dual pedestal hose reel provides a long service life

454697C Flow rates of up to 18 L/min

IbC OIL STORAGE AND TRANSFER KIT • Includes a 3:1 ratio pump, 3m of R1 delivery hose and an electronic oil meter

• Suitable for the storage and dispensing of oil• Low centre of gravity for stability and ease

of handling• Tank dimensions of 1280mm (L) x 770mm (W)


1,000L TANK OIL STORAGE AND TRANSFER KIT

$1,520.00

$3,552.00

$772.00

$2,770.00

$112.50

$2,828.00

$4,126.00

$4,346.00


DIESEL FUEL DISPENSERS ADBLUE

® STORAGE & TRANSFER KITS

• Mechanical flow meter accurate to ±1%• 240V pump noise levels below 75 dB• Easy to install, versatile and compact unit ideal

for both mobile and fixed tank applications

385000 Pump flow rates of up to 56 L/min

DIESEL REFUELLING KIT WITH METER

• Versatile, compact & easy to install 12V pump, reel, filter and auto shut off nozzle kit simplifies diesel fuel transfer

• Hose reel supplied complete with 15m x 3/4" ID hose

• Pump duty cycle of 30 mins on, 30 mins off

212000 12V - Flow rates of up to 45L/min

213000 24V - Flow rates of up to 45L/min

DIESEL REFUELLING SYSTEMS

• Preset dispensing possible• Accurate to ±0.5%• Can accept and record vehicle registration numbers

and odometer readings• Facilitates fast and precise fuel dispensing by approved

personnel only

51090P Flow rates of up to 70 L/min

240V DIESEL FUEL DISPENSER WITH MULTI USER METER

HIGH VOLUME DIESEL FUEL TRANSFER PUMPS

• Vane type pumps with sintered steel rotor and acetylic resin vanes

• 240V continuous running operation• 1" BSP inlet and outlet



SELF PRIMING DIESEL FUEL PUMPS

• Self priming electric vane pump• Fixed brush motor with permanent

magnet stator• Up to 2m suction capacity

52040 12V - Flow rates of up to 50 L/min

52041 24V - Flow rates of up to 50 L/minMObILE 240V DIESEL FUEL TRANSFER PUMP

• Maximum pressure of 36psi (2.5bar)• 1-1/2" BSP inlet and outlet• Suitable for use in the mining sector and

other high volume diesel transfer applications

ST200 Flow rates of up to 200 L/min

SUbMERSIbLE TRANSFER KIT

• Submersible pump for diesel, water, coolant and oils up to SAE20• 20 minute duty cycle• Includes 4m of fuel delivery hose, 4m of battery cable with

on/off switch & clamps and a manual nozzle



SUbMERSIbLE TRANSFER KIT

• Submersible pump for diesel, water, coolant and oils up to SAE20• 20 minute duty cycle• Includes 4m of fuel delivery hose, 4m of battery cable with

on/off switch & clamps and a manual nozzle

EL SERIES

$3,194.00

$1,580.00

$4,476.00

212000 $2,786.00

52040 $363.00

50000 $173.40

50001 $173.40

732000 $451.00

326000 $872.00

213000 $2,786.00

52041 $363.00

DIESEL FUEL DISPENSERS ADBLUE

® STORAGE & TRANSFER KITS

240V DIESEL FUEL DISPENSER WITH MULTI USER METER

ADbLUE® IbC 240V DISPENSING KITS

AB80005 240V - Flow rates of up to 28 L/min



ADbLUE® IbC 240V PUMPS




ADbLUE® AUTOMATIC SHUT OFF NOZZLE

AB80040 24V Flow rates of up to 70 L/min

ADbLUE® MANUAL SHUT OFF NOZZLE


ADbLUE® ELECTRONIC METER

AB80050 Flow rates of up to 100 L/minADbLUE® ROTARY HAND OPERATED DRUM PUMP

AB80055 Flow rates of up to 18 L/min

LOCKAbLE ADbLUE® STORAGE & DISPENSING KITS

101125 125L tank

101200 200L tank

101430 430L tank

101600 600L tank

• Operating pressures of up to 290psi (20bar)• Accurate to ±1.0%• 1" BSP inlet and outlet connections • Operating pressures of up to 290psi (20bar)

• Accurate to ±1.0%• 1" BSP inlet and outlet connections

• Automatic shut off operation• 3/4" BS (f) inlet• 13/16" spout diameter

• 1" BSP inlet and outlet• Maximum supply pressure of 26psi (1.6 bar)

• 1.5m x 3/4" ID suction hose• 6m x 3/4" ID delivery hose• Pump also suitable for the transfer of organic acids, deter-

gents and a variety of water soluble inorganic chemicals

• Flow rates of up to 80 L/min• 3/4" BSP(f) inlet• 13/16" OD spout diameter

EL SERIES

LOCKABLE KITS

• Single skin container constructed from polyethylene approved for AdBlue®

• Moulded recesses for strapping during transport• Integral carry handles aids handling and transport• Self-priming 12V electric diaphragm pump delivers up to 30 L/min• 4m delivery hose• Manual nozzle• Lockable lid (lock supplied on 125L and 200L sizes)

$393.00

$119.30

$65.60

$295.20

AB80005 $1,822.00

AB80015 $1,129.00

AB80010 $1,149.00

AB80030 $464.00

AB80025 $575.00

AB80035 $464.00

101125 $1,660.00

101200 $1,833.00

101430 $2,587.00

101600 $2,993.00

DIAPHRAGM & DRUM PUMPS

DIESEL STORAGE & DISPENSING KITSA Breath

of Fresh Air

AIR OPERATED DIAPHRAGM PUMPS

• Suitable for the transfer of diesel fuel, gear oil, engine oil, waste oil, brake fluid, antifreeze and waste water

NDP-40BAH 1-1/2" Maximum flow rates of up to 350 L/min

NDP-25BAH 1" Maximum flow rates of up to 160 L/min

NDP-20BAH 3/4" Maximum flow rates of up to 100 L/min

NDP-15FPH 1/2" Maximum flow rates of up to 45 L/min

NDP-25BAH

NDP-15FPH NDP-40BAHNDP-20BAH

EL SERIES AIR OPERATED DIAPHRAGM PUMPS ALEMITE 5:1 RATIO CHEMICAL DRUM PUMP

DP70025 1" Maximum flow rates of up to 180 L/min

DP70020 3/4" Maximum flow rates of up to 90 L/min

7835-SDTR Flow rates of up to 17 L/min

DP70025• 1" BSP(f) fluid inlet and outlet. 3/8" BSP(f) air inlet• Max. working pressure of 120psi (8bar)• DP70020• 3/4" BSP(f) fluid inlet and outlet. 1/4" BSP(f) air inlet• Max. working pressure of 120psi (8bar)

• 1/4"NPT(f) air inlet and 3/4" NPT(f) fluid outlet• Ideal for repetitious, high performance

manufacturing applications• Stainless steel & teflon construction• suitable for the transfer of higher viscosity fluids

including detergents, anti-corrosion fluids, wood varnish and adhesives

DP70020

POLYPROPYLENE SYPHON DRUM PUMP

225 Delivers up to 20 L/min

• Constructed with a polypropylene pump head and a PTE pick up tube

• Includes a 875mm pick up tube and a 1.2m delivery hose

• Adjustment knob on the top of the pump can be used to stop the pump from siphoning

DP70025

$2,973.00

$1,937.00

$1,290.00

$1,084.00

$1,551.00

$5,960.00

$59.60

$1,169.00

101600 $2,993.00

DIAPHRAGM & DRUM PUMPS

DIESEL STORAGE & DISPENSING KITS

LOCKAbLE 400L DIESEL REFUELLING, STORAGE & DISPENSING KITS

• 400L storage tank capacity• Heavy duty, robustly constructed polyethylene tank• Built in nozzle holster• Lockable lid aids diesel fuel security and protects dispensing kit

components• Auto and shut off fuel nozzle

L40068PA 12V diesel fuel pump capable of flow rates of up to 50 L/min

L40068PAM 12V diesel fuel pump capable of flow rates of up to 70 L/minwith electronic fuel meter

L40049GA 12V diesel fuel pump capable of flow rates of up to 49 L/min

L40049GAM 12V diesel fuel pump capable of flow rates of up to 50 L/minwith electronic fuel meter

L40040PA 12V diesel fuel pump capable of flow rates of up to 50 L/min

L40040PAM 12V diesel fuel pump capable of flow rates of up to 50 L/minwith electronic fuel meter

400L DIESEL REFUELLING, STORAGE & DISPENSING KITS

• 400L storage tank capacity• Heavy duty, robustly constructed polyethylene tank• Built in nozzle holster• Auto shut off fuel nozzle

40068PA 12V diesel fuel pump capable of flow rates of up to 70 L/min

40049GA 12V diesel fuel pump capable of flow rates of up to 49 L/min

40040PA 12V diesel fuel pump capable of flow rates of up to 50 L/min

DD20500 Diesel driven 2" diesel transfer pump – 500 L/min - pull start

DD20500KS Diesel driven 2” diesel transfer pump – 500 L/min - key start

DIESEL DRIVE - DIESEL TRANSFER ENGINE PUMPS

PD10120 Petrol driven 1" diesel transfer pump – 120 L/min - pull start

PETROL DRIVE - DIESEL TRANSFER ENGINE PUMPS

PD401500KS Petrol driven 4" diesel transfer pump – 1500 L/min - key start

DD401060KS Diesel driven 4" diesel transfer pump – 1060 L/min - key start

PETROL & DIESEL DRIVE - DIESEL TRANSFER ENGINE PUMPSENGINE PUMPS

PD401500KS

PD10120

DD20500

$1,933.00

$2,292.00

$1,884.00

$1,565.00

$2,333.00

$1,518.00

$1,463.00

$1,404.00

$1,694.00

$1,337.00

$1,263.00

$2,384.00

$418.00

$1,736.00


REFUELLING KITS & DRUM PUMPS

12V DIESEL REFUELING TANK KITS

52000A 12V - Flow rates of up to 50 L/min

52001A 24V - Flow rates of up to 50 L/min

• Includes 4m of antistatic fuel delivery hose, 2m of battery cable, a stainless steel & brass fuel filter and auto shut off nozzle

• Maximum head capacity of 15m• Duty cycle of 30 minutes on, 30 minutes off

HI SPEED REFUELLING DRUM PUMPS

5060AN Flow rates of up to 115 L/min

5080AN Flow rates of up to 115 L/min with inline filter

• Ideal for the transfer of diesel, petrol, light oils up to SAE30 and kerosene

• Includes 2.6m of antistatic UV and fuel resistant hose, metal nozzle and nozzle holster, 3-piece downtube and bung adaptor

ROTARY DRUM PUMP

501A Flow rates of 18 L/min or 0.26L per rotation

• Zinc alloy impellars make the pump suitable for the transfer of diesel, petrol, kerosene, unleaded petrol and low viscosity oils

• Includes 2.2m of antistatic hose, bung adaptor, rubber gasket, four chamber rotor assembly, spout and spout holster

REFUELLING NOZZLES, METERS

REFUELLING DRUM PUMP

5005AN2 Flow rates of up to 40 L/min

• Adjustable spout, ABS piston and polypropylene piston seals and 2.6m antistatic hosemake the pump suitable for the transfer of diesel fuel, petrol, kerosene, unleaded petrol and low viscosity oils up to SAE30

• Suitable for fuel transfer out of 205L drums or petrol and diesel bulk tanks up to 1000mm deep

HI VOLUME 12V DIESEL REFUELLING DRUM PUMPS

52004A Flow rates of up to 68 L/min with auto shut off nozzle

52004 Flow rates of up to 75 L/min with manual shut off nozzle

• Telescopic down tube suits fuel tanks up to 1000mm deep

• Heavy duty cast iron housing protects the dual motors and the pump head assembly

• Duty cycle of 30 minutes on, 30 minutes off

12V PETROL & AVGAS TANK PUMP

371000 Tank pump - Flow rates of up to 50 L/min

372010 205L drum pump - Flow rates of up to 50 L/min

• Transfers ULP, E10, diesel, kerosene and Avgas• Duty cycle of 30 minutes on and 60 minutes off• 1" BSP(f) inlet and outlet threads• Inbuilt nozzle holster and antistatic fuel hose• Sturdy construction with cast iron body

12V DIESEL REFUELLING KITS

52002A Flow rates of up to 46 L/min


• 3/4" BSP(f) inlet and oulet thread• Rotary vane type pump inclusive of fuel

nozzle, holster, 4m antistatic delivery hose and 2m battery cable

• Suitable for diesel fuel transfer only • Duty cycle of 30 minutes on, 30 minutes off

& HOSE KIT

371000

372010

$617.00

$617.00

$136.00

$291.10

5060AN $337.00

52004A $1,228.00

52004 $966.00

371000 $777.00

372010 $1,100.00

52002A $755.00

52002 $594.00

5080AN $599.00

REFUELLING KITS & DRUM PUMPS

REFUELLING NOZZLES, METERS

AUTOMATIC SHUT-OFF DIESEL NOZZLES



• Automatically shuts off when the tank is full• Suitable for applications involving an electric diesel transfer pump• 1" BSP(f) swivel included

MANUAL SHUT-OFF DIESEL NOZZLES

52007 Diesel fuel, flow rates of up to 150 L/min

52115 Unleaded Petrol, flow rates of up to 150 L/min

• Suitable for pressures up to 140psi (10bar)• Sturdy latch mechanism allows the nozzle to be locked open• 1" BSP(f) swivel included

3 AND 4 DIGIT MECHANICAL DIESEL METERS

51008 With 3 digit batch total of 999L

51007 With 4 digit batch total of 9,999L

• Mechanical gear meter accurate to ±1.0%• Maximum working pressure of 142psi (10bar)• Repeatability of ±0.2%• Accurate flow rates from 20 L/min to 120 L/min

GPI MECHANICAL FUEL METER

FM200 Accurate flow rates from 15 L/min and 75 L/min

• Field calibration possible, batch total of 999L• Heavy duty cast aluminium housing• 1" BSP inlet and outlet

IN LINE ELECTRONIC FUEL METER

407010N Accurate flow rates from 20 L/min and 120 L/min

• Maximum working pressure of 145psi (10bar)• Suitable for use with diesel fuel, petrol,

kerosene and windscreen fluid• 1" BSP(f) inlet and outlet ports• 5 digit batch total of 99,999L

GPI IN LINE ELECTRONIC FUEL METER

01A12LM 300psi max. working pressure

• For use on gravity feed or fuel transfer pumps in the 10 L/min to 100 L/min flow range

• 1" BSP(f) inlet/outlet• Maximum batch total of 9,999L

FUEL FILTER

FA2 With 10 micron filter element

• Fuel filter suitable for use with gravity feed fuel tanks and with hand, air or electric drum pumps

• Features a drain cock and a replaceable clear plastic bowl

• 1" BSP inlet and outlet

DIESEL FARM TANK HOSE & NOZZLE KIT

FTH1-3M2 3m x 1" ID diesel delivery hose

• Maximum working pressure of 145psi (10bar)

• Temperature range of -50ºC to +60ºC

• Suitable for use with 205L drum pumps & overhead feed tanks

& HOSE KIT

$45.80

$267.10

$46.20

$254.40

$294.70

$346.00

$296.10 $101.00

$121.00

$410.00

$294.70


SPILL CONTAI

NMENT

EQUIPMENT & PARTS WASHER

S

205L DRUM AND IbC SPILL CONTAINERS

• 100% recyclable polyethylene construction• Compatible with most forklifts and pallet trucks• Helps to create an OH&S compliant workplace environment• New style SJ-510-001 saves on freight & transportation costs

SJ-510-001 Single 1,000L IBC Spill ContainerDimensions of 1450mm (L) x 1450mm (W) x 1000mm (H)

SJ-500-003 Double IBC Spill ContainerDimensions of 2450mm (L) x 1450mm (W) x 575mm (H)

SJ-100-002 2 Drum Spill Container Dimensions of 750mm (L) x 1300mm (W) x 440mm (H)

SJ-100-006 4 Drum Spill Container Dimensions of 1290mm (L) x 1380mm (W) x 280mm (H)

• 100% recyclable polyethylene construction• Compatible with most forklifts and pallet trucks• Helps to create an OH&S compliant workplace environment

SJ-200-010 4 Drum Rack & Spill Container Dimensions of 940mm (L) x 1375mm (W) x 390mm (H)

SJ-200-003 2 Drum Rack & Spill Container Dimensions of 1350mm (L) x 1375mm (W) x 635mm (H)

SJ-300-001Modular workfloor & spill containerDimensions of 800mm (L) x 1600mm (W) x 150mm (H)

SJ-300-0064 drum workfloor & spill containerDimensions of 1600mm (L) x 1600mm (W) x 150mm (H)

SJ-300-010Modular workfloor rampDimensions of 1290mm (L) x 810mm (W) x 180mm (H)

SJ-100-002SJ-100-006

SJ-510-001

SJ-500-003

MODULAR WORKFLOOR AND DRUM RACK & SPILL CONTAINERS

240V PARTS WASHERS

80365 Parts washer with mobile stand

80364 Parts washer only - no mobile stand

• Working tank dimensions: 430mm x 420mm x 60mm• Supplied complete with interchangeable

cleaning brushes• Convenient and safe storage space for tools• Dimensions (without stand): 800mm x 550mm x 250m• Lockable plastic case will not dent or corrode

$2,274.00

$3,766.00

$658.00

$768.00

SJ-200-010 $1,549.00

SJ-300-001 $696.00

SJ-300-010 $304.00

SJ-300-006 $968.00

SJ-200-003 $965.00

80365$630.00

80364$272.20

SPILL CONTAI

NMENT

EQUIPMENT & PARTS WASHER

S GREASING EQUIPMENT

ACCESSORIES & NIPPLE KITS

GREASE GUN FLEXES

GREASE NIPPLE ASSORTMENT KITS

• Industrial quality, genuinely high pressure, high flexibility grease gun flexes

• Minimum burst pressure of 14,500psi (1,000bar)• Polyamide hose maximises product life

• Each kit contains a popular range of grease nipples contained in a convenient compartmentalised refillable carry case

• All grease nipples included in the kits are case hardened, fully chromated, zinc passivated, batch tested to 8,000psi (552bar) and conform to international standards including BSS 1486, DIN 71412, SAE J534 and JIS B1575

14551 30cm long

14552 45cm long

14553 70cm long

L4676 100 piece Metric grease nipple assortment kit

L4675 101 piece Industrial grease nipple assortment kit

L4674 120 piece Agricultural grease nipple assortment kit

4-JAW GREASE GUN COUPLER

14513 16mm OD

• 4-jaw design enables quick and effortless grease nipple connect and disconnect

• 12mm spanner slot assists during coupler replacement

• Easy on, easy off

3-JAW GREASE GUN COUPLER

308730 14mm OD

• 3-jaw design guarantees a tight and precise grease nipple connect & disconnect

• Manufactured and designed for heavy duty industrial applications

• Includes a 180kg grease pump and drum cover, high pressure grease control gun with z-swivel, open type single arm hose reel with 15m x 3/8" ID hose and 550mm OD follower plate

• 550mm follower plate

STATIONARY GREASING SYSTEM

453000N 55:1 pressure ratio pump

20KG GREASE GUN LOADER PUMP

108000 Delivers up to 50g per stroke

• Facilitates fast, convenient and containment free grease gun refill when using bulk grease

• Reduces your per kilo grease price by buying your grease in 20kg drums

600A Delivers up to 1.6g of grease per stroke

450G LEVER ACTION GREASE GUN

• Grease pressures of up to 12,000psi (828bar)• Unique Twin Lock System seals the piston and

eliminates the possibility of dummy lubrication• High volume, high pressure greasing guaranteed• 450g cartridge of grease

$10.20

$12.10

$72.60

$80.50

$82.80

$81.00

$2,841.00

14551 $14.90

14552 $15.50

14553 $25.20

$243.00

PULSARLUBE

bekaone

BL-1 SERIES grease INJECTORS


41250080021 Beka BL-1 Series replacement grease injector $156.00

41250081221 Beka BL-1 Series one stage grease injector manifold $246.10

41250082221 Beka BL-1 Series two stage grease injector manifold $350.00

41250083221 Beka BL-1 Series three stage grease injector manifold $482.00

41250084221 Beka BL-1 Series four stage grease injector manifold $628.00

41250085221 Beka BL-1 Series five stage grease injector manifold $769.00

41250086221 Beka BL-1 Series six stage grease injector manifold $898.00

SINGLE POINT

lubricaTORSSINGLE P

OINT lubricator

Beka BL-1 Injector systems are easy to understand, install and maintain. Every injector has its own indicator pin which gives visual feedback of correct operation. Troubleshooting a BL-1 system is done simply by checking the indicator pins as the system completes a full lubrication cycle. Beka BL-1 injectors are built for a long and rugged service life, but when they need service, they are easy to remove and replace without needing to disturb the rest of the system.

They have easy external volume adjustment, so bearing volumes can be set to the correct amount and or adjusted to suit the conditions at any time.

BL-1 injectors can be installed with a range of colour coded adjustment rings which can be used to adjust volumes precisely and allow easy visual checking of the volume settings.

The Beka BL-1 injectors are interchangeable with most other similar injectors used in industry.

TECHNICAL DATA• Operating pressure. Max 240bar (3,530psi)

min 140bar (2,050psi)• Venting pressure. Less than 50bar (735psi)• Temperature range -26ºC to 93ºC• Lubricant Fluid. Grease up to NLGI 2• Metering volume. Adjustable from 0.2cc to 1.2cc/stroke• Material. Silver Zinc coated steel

bL-1 SERIES GREASE INJECTORS

41250081221 41250082221 41250083221 41250084221 4125008622141250080021 41250085221

BekaOne Single Point Grease Lubricators are mounted directly onto a lubrication point and ensure reliable lubrication for 1, 3, 6, 12 or 24 months per filling.

The BekaOne has been specifically designed as the ideal solution to supply single lubrication points where a central lubrication system is too large or too complex.

Operated by electromechanic actuation the BekaOne offers precise grease metering and is effective over a wide temperature range and can be filled up to six times before replacement is required.

Suitable for grease and oil, the BekaOne can be filled easily and quickly with a grease gun for example and significantly reduces lubrication costs associated with bearings, open gears, chains, drives, compressors and conveyors.

$206.30

PULSARLUBE

bekaone

BL-1 SERIES grease INJECTORS

SINGLE POINT

lubricaTORSSINGLE P

OINT lubricator

FEATURES SPECIFICATIONS

Capacity 125cc, 250cc, 500cc

Pump Type Vertical self priming pump

Available Dispensing Periods 125cc: 1-12mths. 250, 500cc: Half (H) 1, 2, 3, 6 & 12mths

Operating Pressure Avg. 30kgf/cm2 (425psi) Max. 60kgf/cm2 (850psi)

Operating Temp Range -15oC~60oC (5oF~140oF) -40oC~60oC (40oF~140oF) with a lithium battery pack

Battery DC 4.5V battery pack (replaceable)

Installation Thread Size 3/8" PT

Dispensing Volume 0.34m//piston stroke @ 20oC

IP Code IP54

Multi Point Lubrication Can lubricate up to 8 points, 6m (20ft) per point

Product Certifications CE

Packaging 10 Units/Case

The innovative Pulsarlube M is designed to ensure reliable lubrication and at the same time cut lubrication costs with an advanced computerised control system. It consists if a vertical feed pump, motor/gear set and microprocessor allowing operating pressure of 30kgf/cm2

(425psi). It is ideal for hard to reach/hazardous locations via remote installation capability.Pouch Spring

Pouch Plate

Grease Pouch

Motor

Gear Set

Worm Gear

Housing

LCD

Main Body

Piston

Connecting Thread 3/8" PT

M60/MAIN PULSARLUBE M 60cc WITHOUT GREASE $300.60

M60/PL1 PULSARLUBE M 60cc FILLED WITH PL1 MULTI PURPOSE GREASE $346.00







E60/EMPTY PULSARLUBE E 60cc WITHOUT GREASE $56.00

E60/PL1 PULSARLUBE E 60cc FILLED WITH PL1 MULTI PURPOSE GREASE $60.80





E/NRV NON RETURN VALVE $4.50

The Pulsarlube E is designed to offer superior advantages in cost competitiveness and user friendliness over conventional gas type single point lubricators (SPL). The Pulsarlube E has a creative and innovative design which satisfies a wide variety of demands for industrial applications. It operates based on the proven technology of electrochemical reaction which generates inert Nitrogen (N2) gas through the systematic use of an electrolyte and electrical energy. The Pulsarlube E utilizes an intuitive mode selecting mechanism to ensure an error-free and simple operation. The Pulsarlube E is the right choice for a cost effective, reliable and safe SPL product for most industrial applications.

Housing Cap

Battery Cover

BatteryMode Selector

PCB

N2 Gas Generation Cell

Piston

Lubricant Reservoir

Grease

Base

1/4" NPT/BSPT Thread

Protector

FEATURES SPECIFICATIONS

Gas Type Nitrogen (N2) gas

Gas Generating Method Electrochemical

Grease Capacity 60cc, 120cc, 240cc

Housing Design Transparent plastic

Operating Temp Range -20oC~55oC (-4oF~131oF)

Operating Pressure Max. 5kgf/cm2 (70psi)

Remote Installation Up to 1m (3ft) using a 8mm (5/16") O.D. Tube

Available Dispensing Periods

1, 3, 6, 9, & 12 months

Certification / IP Code ATEX / CE / UL / IP68

Packaging 10 Units/Case* Customised and non-standard fill greases available on customer request.

Stores advertised on page one of this catalogue are independent businesses. Every effort has been made to ensure that advertised stock is available, but due to factors beyond the control of Alemlube Pty Ltd not all products advertised in this catalogue are available at all stores. Pricing for the products are special prices available through to 31st of July 2015. Regular prices vary from store to store. The catalogue pricing is calculated in good faith as the average regular price at the time of preparation. Alemlube Pty Ltd will do everything possible, within reason, to maintain stocks of advertised products but cannot be responsible for unforeseen shortfalls beyond their control. All products are covered by a 2 year warranty (unless otherwise stated) and with the aid of our sixty five strong nationwide Authorised Agent Network, technical support for all Alemlube products featured in this catalogue will never be far away. E.&O.E. Copyright 2015. Reproduction in whole or part is prohibited without written approval. All prices shown include GST. Freight charges may be applicable and may vary from region to region.


GREASING EQUIPMENT

670AN3 Delivery rates of up to 170 g/min

• High volume, high pressure greasing• Grease pressures of up to 11,200psi (800bar)• Two hand or one hand operation• Powerful magnet attaches the gun to any flat surface

610A Delivers up to 2.5cc of grease per stroke

450G SPEEDY GREASE GUN

20KG GREASE KITS

• 55:1 ratio air motor develops grease pressures of up to 7,950psi (548bar)

• Will handle high density, tacky greases up to NLGI2• Integral filter protects pump from foreign particle contamination• Ideal for busy workshops where greasing is undertaken all day,

every day

424170 Delivery rates of up to 0.9 kg/min Stationary kit

424150Delivery rates of up to 0.9 kg/minMobile kit complete with trolley

GREASE CONTROL VALVES

415002 • Maximum operating pressure of 7,150psi (500bar) • Accurate to ± 2% • Supplied with an electronic meter, swivel and flexible extension 413077 • Ergonomic, light weight and well balanced cast alloy body • Supplied wth a rigid outlet and heavy duty 3 jaw coupler

415002 Grease metering control valve

413077 Standard duty grease control valve

G10040N Delivers up to up to 80 g/min

EL SERIES 450G 18V LITHIUM-ION CORDLESS GREASE GUN

• Generates grease pressures up to 10,000psi (690bar)• Dispenses grease from up to 12 x 450g cartridges before

changing over or recharging of the 3000 mAh battery is required• The key to fast and efficient plant and machinery greasing

• Grease pressures of up to 8,000psi (552bar)• Two Lithium-ion batteries supplied as standard• Ergonomic and light weight at just 3.5kg• Up to 24 x 450g cartridges per charge

450G 18V LITHIUM-ION CORDLESS GREASE GUN

450G TRIGGER ACTION GREASE GUN & CARRY CASE

660ANP 660AN delivers up to 1.1g of grease per stroke

• Bonus carry case ensures contaminant free protection for your 660AN grease gun & greasing accessories

• Convenient & handy storage for an extra grease cartridge• Grease pressures of up to 8,500psi (586bar)• High volume or high pressure option facilitates fast

and efficient greasing• Patented Ever-Flow System enables the use of thick tacky

greases even in the coldest conditions

BONUS FREE

CARRY CASE

$166.10

$419.00$116.60

$1,053.00

424150$1,104.00

424170$991.00

413077$164.60

415002$962.00

a breath sky h i g h of fresh air - agriculture –...

Documents