a complete high productive system with safety gas systemnsw.cmg.net.au/datasheet/hilti direct...
TRANSCRIPT
57
The powder-actuated fasteningsDX 351 & DX 460 fasteners 61-64Assemblies 64
Gas systemGX 100 gas tool 58Fasteners & accessories
The powder-actuated tools DX 351 & accessories 59DX 460 & accessories 60
Roofing and decking toolsDX 750 & accessories 66DX A70 R & accessories 66
VariousDX 462 HM marking tool & accessories 65DX fastening systems for grating & floorplates 67+68Hand tool programme, accessories 69
A complete high productive system with safety Page
Powder-actuated (DX) fastening, gas system
2005 Cat 12/1/05 3:08 PM Page 57
58
GX 100 gas system program D
GX100 gas system with 40 nail magazine
Use:n Repetitive fastenings for interior finishing applications on concrete, steel,
block and sand limestone.
Applications:n Repetitive fastenings of metal track, hat-track and wood to floors, walls
and ceilings.n Metal profile fastening to walls for suspended ceilings.n Repetitive fastening of metal track and hat-track, Z brackets and slip track
on steel beams and columns.
Benefits:n No battery to charge.n Versatile. Wide range of applications and consumables.n Simple. Convenient magazine attachment, removal and cleaningn Fast. Up to 1000 repetitive fastenings per hour.
GX100 gas toolItem Ordering Package Priceno. designation contents per
338047 GX100 gas tool with 40 nail magazine 1 1378586 X-GM 40 spare magazine 1 1
Fastener and gasEach box of nails includes: 750 nails Order gas separately: 1 gas can per box of nails
Item Ordering Application Nail Package Priceno. designation length contents per
340231 X-EGN 14MX Steel 14mm 750 100340228 X-GHP 18MX Hard concrete 18mm 750 100340232 X-GN 20MX Concrete 20mm 750 100340230 X-GN 27MX Concrete, block, sand limestone 27mm 750 100340233 X-GN 32MX Concrete, block, sand limestone 32mm 750 100340234 X-GN 39MX Concrete, block, sand limestone 39mm 750 100304577 GC 11 gas can for 750 fastenings 1 1
2005 Cat 12/1/05 3:08 PM Page 58
59
DX 351 powder-actuated tool
Uses Making repetitive short fastenings in concrete, brick & steel
Technical dataPerformance: Light/Medium duty fasteningWeight: 2.2 kgLength: 404 mmCartridge: 6.8/11 in magazine strips of 10-3 power levelsFasteners: Single nails 47 mm
Item Ordering Package Priceno. designation contents per
373107 DX 351-F8 tool 1 1333033 DX 351 X-MX 27 magazine tool 1 1333315 X-MX 27 magazine 1 1
PISTONS DX 351331047 X-P8S-351 (standard) 1 1331193 X-P8L-351 (narrow) 1 1331194 X-P8AL-351 (for X-AL-H nails) 1 1
FASTENER GUIDES DX 351331300 X-FG 8 ME 351 (standard) 1 1331206 X-FG 8L-351 (narrow) 1 1304285 X-EF adaptor 1 1331017 DX 351 buffer 1 1
Pole tool
Item Ordering Package Priceno. designation contents per
333310 X-PT 351 7ft pole tool (complete) 1 1333312 X-PT 351 pole tool adaptor (tool holder part only) 1 1254684 Pole extension 3ft 1 1254685 Pole extension 1ft 1 1
Cartridges for DX 351
Item Ordering Package Priceno. designation contents per
050351 6.8/11M green 100 100050352 6.8/11M yellow 100 100050353 6.8/11M red 100 100
Featuresn Fully automatic-no tool cycling n Lightweightn Mechanical piston return-reduced servicen Safe low velocity piston principle
Featuresn 10 nails, 10 cartridges with great speedn Fully automatic, no tool cyclingn Lightweightn Safe low velocity piston principle
DX 351 X-MX 27 magazine tool
Uses Quick, high volume, repetitive fastenings in concrete, bricks & steel
Technical dataPerformance: Light/Medium duty fasteningWeight: 2.4 kgLength: 404 mmCartridge: 6.8/11 in magazine strips of 10-3 power levelsFasteners: Magazine nails 27 mm
DX 351 ordering information
Extension pipeGripTool holder
DX 351 powder-actuated tool
TOOL
5YEARS
WARRANTY
TOOL
5YEARS
WARRANTY
2005 Cat 12/1/05 3:08 PM Page 59
60
Featuresn 10 nails, 10 cartridges with great speedn Fully automatic, no tool cyclingn Safe low velocity piston principle
DX 460 powder-actuated tool F
DX460 powder-actuated toolUsesThe DX460 combines a high level of user-friendliness with extreme reliabilityfor a large variety of applications:
Technical dataPerformance: Medium/heavy duty fasteningWeight: 3.25 kgLength: 458 mmCartridge: 6.8/11 in magazine strips of 10-4 power levelsFasteners: Single nails 72 mm
DX460MX72 magazine tool
Technical dataPerformance: Medium/heavy duty fasteningWeight: 3.51 kgLength: 475 mmCartridge: 6.8/11 in magazine strips of 10-4 power levelsFasteners: Magazine nails 72 mm
Featuresn Designed for serial fastenings, trouble freen Easy & quick assembly & disassembly
without any extra toolsn Fully automatic, no tool cyclingn Safe low velocity piston principle
DX 460 ordering information Item Ordering Package Priceno. designation contents per
305174 DX 460 tool 1 1371670 DX 460 MX 72 magazine tool 1 1370844 X-MX 72 magazine 1 1
PISTONS373297 X-460-P8 (standard) 1 1373299 X-460-P8AL (for X-AL-H nails) 1 1373300 X-460-P10 (M10 studs) 1 1377813 X-460-PIEL (for X-IE) 1 1305448 X-460-PGR (for grating) 1 1232310 X-AP kwik 1 (for 97mm form working nails) 1 1304532 X-460-P kwik (for DX-kwik nails) 1 1
FASTENER GUIDES304529 X-460-F8 (standard) 1 1304530 X-460-F8N15 (15mm narrow guide) 1 1373317 X-460-F8S12 (S12 nails) 1 1373319 X-460-F10 (M10 studs) 1 1377812 X-460-FIEL (for X-IE) 1 1373331 X-460-WH23/36 (fits on front of magazine to hold 23mm & 36mm steel washers) 1 1376216 X-460-F8GR (for grating) 1 1304285 X-EF adaptor (for EKB & ECH fasteners) 1 1373330 DX 460 buffer 1 1
Pole tool
Item Ordering Package Priceno. designation contents per
370830 X-PT 460 5ft pole tool (complete) 1 1371663 Pole tool holder adaptor (tool holder part only) 1 1254684 Pole extension 3ft 1 1254685 Pole extension 1ft 1 1
Cartridges for DX 460
Item Ordering Package Priceno. designation contents per
050351 6.8/11M green 100 100050352 6.8/11M yellow 100 100050353 6.8/11M red 100 100050354 6.8/11M black 100 100
Extension pipeGripTool holder
TOOL
5YEARS
WARRANTY
TOOL
5YEARS
WARRANTY
2005 Cat 12/1/05 3:08 PM Page 60
61
X-DNI ballistic point nail
Item Ordering Application Shank Length Package Priceno. designation dia. contents per
034351 X-DNI 22 P8 Concrete/Steel 3.7mm 22mm 100 100034352 X-DNI 27 P8 Concrete/Steel 3.7mm 27mm 100 100034353 X-DNI 32 P8 Concrete/Steel 3.7mm 32mm 100 100034354 X-DNI 37 P8 Concrete/Steel 3.7mm 37mm 100 100034355 X-DNI 42 P8 Concrete/Steel 3.7mm 42mm 100 100034357 X-DNI 47 P8 Concrete/Steel 3.7mm 47mm 100 100034360 X-DNI 52 P8 Concrete/Steel 3.7mm 52mm 100 100034361 X-DNI 57 P8 Concrete/Steel 3.7mm 57mm 100 100034363 X-DNI 62 P8 Concrete/Steel 3.7mm 62mm 100 100034364 X-DNI 72 P8 Concrete/Steel 3.7mm 72mm 100 100034365 X-DNI 82 P8 Concrete/Steel 3.7mm 82mm 100 100034368 X-DNI 97 P8 Concrete/Steel 3.7mm 97mm 100 100034536 X-EDNI 16 P8 Steel 3.7mm 16mm 100 100034537 X-EDNI 19 P8 Steel 3.7mm 19mm 100 100244654 X-EDNI 16 S12 Steel 3.7mm 16mm 100 100
X-DNI MX ballistic point nails in magazine strips of 10034372 X-DNI 22 MX Concrete/Steel 3.7mm 22mm 100 100034377 X-DNI 27 MX Concrete/Steel 3.7mm 27mm 100 100034378 X-DNI 32 MX Concrete/Steel 3.7mm 32mm 100 100034379 X-DNI 37 MX Concrete/Steel 3.7mm 37mm 100 100034380 X-DNI 42 MX Concrete/Steel 3.7mm 42mm 100 100034382 X-DNI 47 MX Concrete/Steel 3.7mm 47mm 100 100034384 X-DNI 52 MX Concrete/Steel 3.7mm 52mm 100 100034385 X-DNI 57 MX Concrete/Steel 3.7mm 57mm 100 100034386 X-DNI 62 MX Concrete/Steel 3.7mm 62mm 100 100034544 X-DNI 67 MX Concrete/Steel 3.7mm 67mm 100 100034545 X-DNI 72 MX Concrete/Steel 3.7mm 72mm 100 100034541 X-EDNI 16 MX Steel 3.7mm 16mm 100 100034542 X-EDNI 19 MX Steel 3.7mm 19mm 100 100
X-ZF cut point nail
Item Ordering Application Shank Length Package Priceno. designation dia. contents per
034407 X-ZF 22 P8 Concrete/Steel 3.5mm 22mm 1000 100034408 X-ZF 27 P8 Concrete/Steel 3.5mm 27mm 1000 100034411 X-ZF 32 P8 Concrete/Steel 3.5mm 32mm 1000 100034412 X-ZF 37 P8 Concrete/Steel 3.5mm 37mm 1000 100034422 X-ZF 52 P8 Concrete/Steel 3.5mm 52mm 1000 100034425 X-ZF 62 P8 Concrete/Steel 3.5mm 62mm 1000 100034428 X-ZF 72 P8 Concrete/Steel 3.5mm 72mm 1000 100
X-ZF MX cut point nails in magazine strips of 10 298777 X-ZF 14 MX Concrete/Steel 3.5mm 14mm 1000 100034436 X-ZF 20 MX Concrete/Steel 3.5mm 20mm 1000 100034437 X-ZF 27 MX Concrete/Steel 3.5mm 27mm 1000 100 034438 X-ZF 32 MX Concrete/Steel 3.5mm 32mm 1000 100034439 X-ZF 37 MX Concrete/Steel 3.5mm 37mm 1000 100034444 X-ZF 52 MX Concrete/Steel 3.5mm 52mm 1000 100034452 X-ZF 62 MX Concrete/Steel 3.5mm 62mm 1000 100034454 X-ZF 72 MX Concrete/Steel 3.5mm 72mm 1000 100
Fasteners for DX 351 & DX 460
2005 Cat 12/1/05 3:08 PM Page 61
62
Fasteners for DX 351 & DX 460 F
X-DW MX easy drive nails in magazine strips of 10
Item Ordering Application Shank Length Package Priceno. designation dia. contents per
332206 X-DW 20 MX Concrete/Steel 3.0mm 20mm 1000 100332207 X-DW 27 MX Concrete/Steel 3.0mm 27mm 1000 100
X-AL-H high strength nails
Item Ordering Application Shank Package Priceno. designation dia. Length contents per
040876 X-AL-H 16 P8 Concrete/Steel 3.7mm 16mm 100 100034116 X-AL-H 19 P8 Concrete/Steel 4.0mm 19mm 100 100040877 X-AL-H 22 P8 Concrete/Steel 4.0mm 22mm 100 100040878 X-AL-H 27 P8 Concrete/Steel 4.5mm 27mm 100 100040863 X-AL-H 32 P8 Concrete/Steel 4.5mm 32mm 100 100040879 X-AL-H 37 P8 Concrete/Steel 4.5mm 37mm 100 100
s040884 X-AL-H 62 P8 Concrete/Steel 4.5mm 62mm 100 100040886 X-AL-H 72 P8 Concrete/Steel 4.5mm 72mm 100 100
X-CR stainless-steel nails
Item Ordering Application Shank Shank Thread Thread Package Priceno. designation dia. length size length contents per
247358 X-CR 21 P8 Concrete/Steel 3.7mm 21mm — — 100 100247359 X-CR 24 P8 Concrete/Steel 3.7mm 24mm — — 100 100247360 X-CR 29 P8 Concrete/Steel 3.7mm 29mm — — 100 100
s247361 X-CR 34 P8 Concrete/Steel 3.7mm 34mm — — 100 100s247362 X-CR 39 P8 Concrete/Steel 4.0mm 39mm — — 100 100s247355 X-CR 44 P8 S12 (DX kwik) Concrete 4.0mm 44mm — — 100 100s247356 X-CR 16 P8 Steel 3.7mm 16mm — — 100 100
X-CR stainless steel threaded studs257187 X-CR M6 11-27 FP8 Concrete 3.7mm 27mm M6 11mm 100 100308857 X-CR M8 9-12 FP8 Steel 4.5mm 12mm M8 9mm 100 100372033 X-CR M8 15-12 P8 Steel 4.5mm 12mm M8 15mm 100 100
Threaded studs
Item Ordering Application Shank Shank Thread Thread Package Priceno. designation dia. length size length contents per
306079 X-M6 20-27 FP8 Concrete 3.7mm 27mm M6 20mm 100 100s040465 X-M6H 20-37 FP8 (DX kwik) Concrete 3.7mm 37mm M6 20mm 100 100
306095 X-M8 20-27 P8 Concrete 4.5mm 27mm M8 20mm 100 100026413 X-M10 24-32 P10 Concrete 4.5mm 32mm M10 24mm 100 100
s026325 X-M8H 15-37 P8 (DX kwik) Concrete 4.5mm 37mm M8 15mm 100 100306109 X-EM6 11-12 FP8 Steel 3.7mm 12mm M6 11mm 100 100306136 X-EM8 15-12 FP8 Steel 4.0mm 12mm M8 15mm 100 100026507 X-EM10 24-14 P10 Steel 4.5mm 14mm M10 24mm 100 100
SL forming nailUses: Temporary fastenings, especially for forming (concrete formwork, shuttering etc.)
Item Ordering Application Shank Break Shank Package Priceno. designation dia. off length contents per
370516 SL 62-25 DP8 Timber to Concrete 3.7mm 25mm 62mm 1000 100370513 SL 62-25 MX Timber to Concrete 3.7mm 25mm 62mm 1000 100370510 SL 72-25 DP8 Timber to Concrete 3.7mm 25mm 72mm 1000 1003092183 SL 97 DP8 Timber to Concrete 3.7mm 25mm 97mm 1000 100
X-RE removable nail040500 X-RE 28 P8 BK Concrete 3.7mm 19mm 28mm 100 100
EDNK nails for thin steel (up to 4mm)040264 EDNK 20 P8 TH Steel 3.7mm — 22.8mm 100 100
2005 Cat 12/1/05 3:08 PM Page 62
63
X-IE insulation fastener 25–50mmUsesn Securing insulation behind curtain wall claddingn In composite thermal insulation systemsn Your local Hilti salesman will be pleased to give you further information
Item Ordering Application Shank Shank Max. Top hat Package Priceno. designation dia. length insulation dia. contents per
376463 X-IE 6-25 Concrete/Steel 4.5mm 37mm 25mm 60mm 300 100376466 X-IE 6-40 Concrete/Steel 4.5mm 52mm 40mm 60mm 300 100376468 X-IE 6-50 Concrete/Steel 4.5mm 52mm 50mm 60mm 300 100
X-SW soft washer membrane fastenerX-SW with plate 30 mm dia.
Item Ordering Application Shank Shank Max. Top hat Package Priceno. designation dia. length insulation dia. contents per
040614 X-SW 30 ZF 37 Concrete/Steel 3.5mm 37mm — 36mm 500 100
Electrical fasteners - to suit DX 351 & DX 460Quick and easy installation of electricalcables to ceiling and walls
Item Ordering Application Package Priceno. designation contents per
373267 X-EKB 16 DNI-H42PH cable clamp Concrete/Steel 50 100373255 X-ECH SPH small cable holder Concrete/Steel 100 100373257 X-ECH LPH large cable holder Concrete/Steel 50 100
X-CC wire/rod ceiling clip(also available with pre-fitted wire/rod.)X-HS threaded rod hanger systemFor fastening to concrete
Item Ordering Application Shank Shank Thread Package Priceno. designation dia. length size contents per
299929 X-CC DNI 32 P8 Concrete 3.7mm 32mm — 100 100299935 X-CC AL-H 27 P8 High strength concrete 4.5mm 27mm — 100 100310323 X-ZF 27 P8 CB Concrete 3.5mm 27mm — 100 100
X-HS Range335424 X-HS M10-DNI 32 P8 Concrete 4.0mm 32mm M10 100 100335423 X-HS M8-DNI 32 P8 Concrete 4.0mm 32mm M8 100 100335432 X-HS M6-ALH 27 P8 Concrete 4.0mm 27mm M6 100 100335422 X-HS M6-DNI 32 P8 Concrete 4.0mm 32mm M6 100 100299696 X-HS M6-DKH 48 P8 S15 Concrete 4.0mm 48mm M6 100 100299697 X-HS M8-DKH 48 P8 S15 Concrete 4.0mm 48mm M8 100 100299698 X-HS M10-DKH 48 P8 S15 Concrete 4.0mm 48mm M10 100 100
Also available in Stainless Steel and for steel on request.
X-EKB 16 X-ECH S
X-ECH L
100%
COMPATIBLE
WITH RONDO
SYSTEM
Meets Australian Standard
X-CCX-HS
Fasteners for DX 351 & DX 460
2005 Cat 12/1/05 3:08 PM Page 63
64
Fasteners for DX 351 & DX 460 S
Conduit clipSugar bin clipMine clip
Floor pinPipe tie
Assemblies
Item Ordering Application Shank Length Package Priceno. designation dia. contents per
CONDUIT CLIPS040553 X-FB 16 DNI 27 Concrete/Steel 3.7mm 27mm 100 100040555 X-FB 20 DNI 27 Concrete/Steel 3.7mm 27mm 100 100026996 X-FB 24 DNI 27 Concrete/Steel 3.7mm 27mm 100 100040557 X-FB 28 DNI 27 Concrete/Steel 3.7mm 27mm 100 100
FLOOR PINS034388 X-DNI 27 P8 S15 Concrete/Steel 3.7mm 27mm 100 100034398 X-DNI 32 P8 S15 Concrete/Steel 3.7mm 32mm 100 1003405646 X-ZF 22 P8 R15 TH Concrete/Steel 3.5mm 22mm 500 1003092002 X-ZF 27 P8 R15 TH Concrete/Steel 3.5mm 27mm 500 1003092053 X-ZF 32 P8 S15 TH Concrete/Steel 3.5mm 32mm 500 100
SUGAR BIN CLIP3405650 X-EDNI 19 P8 Steel 3.7mm 19mm 500 100
BCW R15 THMINE CLIPS
3405644 X-DNI 42 P8 S12 MCTH Concrete 3.7mm 42mm 100 1003405645 X-DNI 72 P8 S12 MCTH Concrete 3.7mm 72mm 50 100
PIPE TIE3092330 X-DNI 32 P8 S12 TH Concrete 3.7mm 32mm 400 100
DX-Kwik (for use with DX 460 only)
Item Ordering Application Shank Shank Thread Thread Package Priceno. designation dia. length size length contents per
STEPPED DRILL BITS061787 TX-C 5/23 Masonry drill 5mm 23mm — — 1 1
FASTENERS s040465 X-M6H 20-37 FP8 stud Concrete 3.7mm 37mm M6 20mm 100 100s026325 X-M8H 15-37 P8 stud Concrete 4.5mm 37mm M8 15mm 100 100
299937 X-CC DKH 48 P8 S15 Concrete 4.0mm 48mm — — 100 100299696 X-HS M6 DKH 48 P8 S15 Concrete 4.0mm 48mm M6 — 100 100299697 X-HS M8 DKH 48 P8 S15 Concrete 4.0mm 48mm M8 — 100 100299698 X-HS M10 DKH 48 P8 S15 Concrete 4.0mm 48mm M10 — 100 100
TX-C Drill Bits
X-CC X-HS
2005 Cat 12/1/05 3:08 PM Page 64
65
Steel marking system
DX 462 HM marking tool complete
Item Ordering Package Priceno. designation contents per
285443 DX 462-HM tool with steel marking head 1 1ACCESSORIES
282320 HM marking head 1 1376231 X-462-PM piston 1 1
Marking Characters
Item Ordering Priceno. designation per
007743 Set 10 mm numbers 0 - 9 sets 007745 Set 12 mm numbers 0 - 9 sets 007744 Set 10mm alpha A-Z sets 007746 Set 12mm alpha A-Z set
007747 Spacer 1s 007783 HM dash 1s 007785 HM point 1s 007767 Plastic case (for 120 charac.) 1
Individual characters available on request.
s Available on request subject to lead time
DX 462 HM marking toolUsesThe DX 462 marking system is ideal for:n Marking castings in a wide variety of shapes and typesn Marking all parts which are presently marked using a hammer and
punchesn Marking workpieces outside their normal production locations
The system’s versatility makes it ideal in a wide range of applications andtrades such as:n Steel mills
Marking hot or cold slabs, blooms, billets and ingots as well as light,medium or heavy duty steel sections
n Heavy industryStamping serial numbers on component parts of aircraft, ships,off-shore platforms, rail cars, cranes, earthmoving equipment and otherautomotive parts
n Testing agenciesIdentification and approval marking of metal parts by standardsorganisations and other approval or statutory agencies
2005 Cat 12/1/05 3:08 PM Page 65
66
DX A70 R & DX 750 powder actuated tools D
DX 750 powder-actuated toolThe tool with a big impact
UsesFastenings of all kinds to steel and concrete with nails and threaded studs
Technical dataWeight: 3.652 kgDimensions: 446×96×240 mmCocking pressure: 100-150 NCocking movement: 30 mmFasteners: ENP 2-21 L 15, ENP 2 K-20 L 15
and ENPH 2-21 L 15 nails for profiled metal sheets
DX 750
DX A70 R
DX A70 R powder-actuated toolFasten profiled metal sheeting the quick and easy wayUsesn Fastening of profile metal sheeting to steel.
Technical dataWeight: 11.8 kgDimensions: 970×315×130 mmCocking movement: 92 mmMagazine capacity: 40/40
(40 nails and 40 cartridges)Fasteners: ENP 2-21-L15MXR
Featuresn Automatic piston return & nail/cartridge
transport synchronisationn Ergonomic design, operator stands upright,n 40 fastenings without reloading
4 strips of 10 ENPH fasteners & one strip of40 cartridges (6.8/18m calibre)
n High fastning rate up to 1200 fastenings perhour
n Can be loaded without bending over
DX 750, DX A70 R
Item Ordering Package Priceno. designation contents per
311792 DX A70 R decking tool 1 1023314 DX 750 tool 1 1023342 MX 75 magazine 1 1
CONVERSION SET FOR DX 750023475 Grating (includes 75/10-G piston) 1 1
PISTONS023268 75/ENP2-L (standard for DX A70R and DX 750) 1 1023447 75/10-G (grating system) 1 1
ACCESSORIES023139 Stop ring for DX A 70R and DX 750 1 1
Cartridges
Item Ordering Package Priceno. designation contents per
CARTRIDGES FOR DX A70R258970 6.8/18M blue (40) 400 100258971 6.8/18M red (40) 400 100
CARTRIDGES FOR DX 750050601 6.8/18M green (for head marker) 100 100050602 6.8/18M yellow (for head marker) 100 100050606 6.8/18M blue 100 100050603 6.8/18M red 100 100050604 6.8/18M black 100 100
ENP decking and siding nails for fastening profiled metal sheeting to steel
Shank dia. 4.5 mm, length 25.8 mm
Item Ordering Application For Shank Legth Package Priceno. designation use with. dia. contents per
077936 ENPH 2-21-L15 Steel DX 750 4.5mm 25.8mm 1000 100040586 ENPH 2-21-L15 MX (mag.) Steel DX 750 4.5mm 25.8mm 1000 100258969 ENP 2-21-L15 MXR (mag.) Steel DX A70R 4.5mm 25.8mm 1000 100
2005 Cat 12/1/05 3:08 PM Page 66
67
DX fastening system for grating & floorplates
Grating and floorplate fasteners for the DX fastening systemUsesn Chemicals and oil industryn Off-shore and shipbuildingn Industrial constructionn Warehousesn Steel industryn Power plantsn Food industryn Public transportn Public facilities – footbridges etc.n Water supply and water treatment plants
Featuresn Stainless steel or hot dipped galvanised threaded studs and discsn Discs adapt to the floor surfacen Fasteners don’t work loose through vibrationn Non-slip surface, no tripping hazardn Easy to install and removen Fasteners provide a secure hold and resist horizontal movement
(grating)n Seal to prevent liquids draining through (floorplate)n Safe and secure even under shock loading
X-FCM grating fastening discFor fastening grating with a height of 25–50 mm, to steel
Item Ordering Application Grating Shank Shank Thread Thread Package Priceno. designation height dia. length size length contents per
GRATING FASTENING DISC - HOT DIPPED GALVANISED378683 X-FCM-M 25/30 Steel 25-30mm — — — — 100 100
s378684 X-FCM-M 35/40 Steel 35-40mm — — — — 100 100s378685 X-FCM-M 45/50 Steel 45-50mm — — — — 100 100
378686 X-FCM-M 1 1/4" - 1 1/2" Steel 1 1/4" - 1 1/2" — — — — 100 100GRATING FASTENING DISC - STAINLESS STEEL
s247181 X-FCM-R 25/30 Steel 25-30mm — — — — 100 100s247182 X-FCM-R 35/40 Steel 35-40mm — — — — 100 100s247183 X-FCM-R 45/50 Steel 45-50mm — — — — 100 100
247184 X-FCM-R 1 1/4" - 1 1/2"Steel 1 1/4" - 1 1/2" — — — — 100 100
X-FCP floorplate fastening discFor fastening grating with a height of 5–13 mm, to steel
Item Ordering Application Grating Shank Shank Thread Thread Package Priceno. designation height dia. length size length contents per
FLOORPLATE FASTENING DISCs308859 X-FCP-F 5/10-hot dipped gal. Steel — — — M8 15mm 200 100s308860 X-FCP-R 5/10-stainless steel Steel — — — M8 15mm 200 100s308856 X-FCP sealing ring Steel — — — M8 15mm 200 100
309218 S-NSX 2-8 x 15 setting tool 1
X-M8 threaded studs
Item Ordering Application Grating Shank Shank Thread Thread Package Priceno. designation height dia. length size length contents per
STUDS - ZINC PLATED020035 X-EM8 15-14F FP10 (DX 750) Steel — 4.0mm 14mm M8 15mm 100 100
STUDS - STAINLESS STEELs308857 X-CR M8 9-12 FP8 (DX 460, DX A40) Steel — 4.5mm 12mm M8 9mm 100 100
372033 X-CR M8 15-12 FP8 (DX 460, DX A40) Steel — 4.5mm 12mm M8 15mm 100 100s308858 X-CR M8 9-12 FP10 (DX 750) Steel — 4.5mm 12mm M8 9mm 100 100
372034 X-CR M8 15-12 FP10 (DX 750) Steel — 4.5mm 12mm M8 15mm 100 100
s Available on request subject to lead time.
X-CR M8 9-12 FP10
X-FCP Sealing ring
X-CR M8 9-12P8 X-CR M8 15-12FP10 X-CR M8 15-12P8
2005 Cat 12/1/05 3:09 PM Page 67
68
X-BT Stainless steel threaded studs
Item Ordering Application Tread Thread Package Priceno. designation size length contents per
377074 X-BT M8-15-6 SN 12-R Steel M8 15mm 100 100377078 X-BT M10-24-6 SN 12-R Steel M10 24mm 100 100
Each box includes 100 studs, 1 TX-BT step drill bit,1 power regulation guide and 1 coating protector
Cartridges
Item Ordering Application Tread Thread Package Priceno. designation size length contents per
377204 6.8/11 high precision brown – – – 100 100
Tools
Item Ordering Package Priceno. designation contents per
378266 X-BT 4000 A cordless drill (does not include batteries or chargers) 1 1370101 SFB 185 battery (18V, NiMh) 1 1334624 SFC 7/18 smart charger 1 1377620 DX 351-BTG (for M 8 studs) 1 1378674 X-351 BT FG (fastener guide for M 10 stud) 1 1378676 X-351 BT P 1024 (piston for M 10 stud) 1 1377071 X-BT set case 1 1377080 TX-BT 4/7-110 drill bits 1 1
X-BT system H
X-BT fastening systemFastening to coated steel in corrosion-sensitive environmentsUsesThreaded stud fastening system designed for coated construction steel asthin as 8 mm (5/16”) thick without rework or through-penetration of thebase steel. May also be used on uncoated steel.
Applicationsn Grating n Junction boxn Cable/conduit connectors (T-bar) n Lightingn Cable tray n Pipe hangersn Channel, strut n Door framingn Instrumentation n Outfitting
FeaturesFast Fasten directly to coated/treated steelNo rework Steel corrosion protection remains intactVersatile Works on most standard and high-strength construction steelsSecure Creates a true weld to the base material providing high
holding valuesPortable Eliminates need for long leads, cords
A4316
2005 Cat 12/1/05 3:09 PM Page 68
69
Hand drive tool
Item Ordering Package Priceno. designation contents per
010048 BD1 tool 1 1010407 E5 piston 1 1
Micky pins
Item Ordering Application Shank Length Package Priceno. designation dia. contents per
040351 514 R Concrete/Steel 2.5mm 14mm 500 100040353 518 R Concrete/Steel 2.5mm 18mm 500 100040357 525 R Concrete/Steel 2.5mm 25mm 200 100
Safety & cleaning accessories
Item Ordering Package Priceno. designation contents per
308976 DX lubricant 66ml 1 1009354 Cleaning cloth 1 1004827 Round brush 9 1 1004828 Round brush 22 / 28.5 1 1003206 Brush 3 / T69 1 1059722 Protective goggles 1 1006100 Warning sign 1 1
Fastening accessoriesItem Ordering Package Priceno. designation contents per
051744 R 15 washer 100 100051731 R 23 washer 100 100051743 R 36 washer 100 100053539 Ceiling bracket 100 100051701 HS wood shearing ring 200 100
Hand tool programme, accessories
2005 Cat 12/1/05 3:09 PM Page 69