a division of transnet soc ltd - etenders.gov.za doc_31.pdf · a division of transnet soc ltd ......

Template RFQ with LC April 2017

TRANSNET FREIGHT RAIL,

a division of TRANSNET SOC LTD

Registration Number 1990/000900/30

[hereinafter referred to as Transnet]

REQUEST FOR QUOTATION [RFQ] No ERAC-VAR-23795

FOR THE SUPPLY OF: PROTECTIVE CLOTHING AND SAFETY EQUIPMENT ON AN

“AS AND WHEN” REQUIRED BASIS TO ERMELO, WITBANK

NELSPRUIT, OGIES AND WELGEDACHT FOR A PERIOD OF

9 MONTHS

FOR DELIVERY TO: ERMELO, WITBANK, NELSPRUIT, OGIES AND

WELGEDACHT

ISSUE DATE: 12 MAY 2017

CLOSING DATE: 15 JUNE 2017

CLOSING TIME: 10:00 AM

VALIDITY PERIOD: 23 OCTOBER 2017

PREQUALIFICATION CRITERIA - ONLY RESPONDENTS FALLING IN THE

FOLLOWING CATEGORIES MAY RESPOND TO THIS RFQ:

− RESPONDENTS WITH A MINIMUM B-BBEE STATUS LEVEL OF 4;

− EXEMPTED MICRO ENTERPRISES (EMEs) AND/OR QUALIFYING SMALL

ENTERPRISES (QSEs);

Transnet Request for Quotation No Erac-Var-23795 of 237 RFQ for the Supply and Delivery of Protective Clothing and Safety Equipment on an ‘As and When’ Required Basis to Ermelo, Witbank,

Nelspruit, Ogies and Welgedacht for a Period of 9 Months.

Page 2 of 237


Section 1

NOTICE TO BIDDERS

1 Invitation to bid

DESCRIPTION

For the Supply and Delivery of Protective Clothing and Safety

Equipment on an “As and When” Required Basis to Ermelo, Witbank,


INSPECT / COLLECT DOCUMENTS FROM

This bid may be downloaded free of charge directly from the National

Treasury e-Tender portal: www.etenders.gov.za

Alternatively, this RFQ may be purchased at R250 [inclusive of VAT] per set for those Bidders that require a copy from Transnet rather than downloading from the website. If a copy of the tender document is

required, prior arrangements must be made one (1) day in advance and the tender document may be collected between 09:00 and 15:00 from 12 May 2017 until 24 May 2017 This RFQ may be collected from the following address: Transnet Freight Rail Tender Advice Centre, Ground Floor, Nzasm Building, Room G16, Corner of Paul Kruger and Minaar Street Pretoria, 0001

TENDERS COLLECTED FROM NT PORTAL:

IMPORTANT INFORMATION

If Bidders intend to download the bid off the Portal, they are required to indicate their intention to respond to this bid by 24 May 2017 by sending an email with their contact details to the following address: [email protected] or [email protected] This is to ensure that any required communication (e.g. addenda to the bid) in relation to this bid reaches those intending to respond. Transnet will not be held liable if Bidders do not respond by this date and do not receive the latest information regarding this Bid as a result thereof.

BID FEE AND BANKING DETAILS

If the bidder chooses to collect the document from Transnet, the following bank details must be used

R250.00 [inclusive of VAT] per set. Payment is to be made as follows: Account Name : Transnet Freight Rail Account : Standard Bank Account number : 203158598 Branch code : 004805

NOTE – This amount is not refundable. A receipt for such payment made must be presented when collecting the RFQ documents and submitted thereafter with your Quotations

COMPULSORY BRIEFING SESSION

A compulsory Briefing session will be conducted at Nzasm Building, Corner Paul Kruger and Minaar street, Jacaranda Boardroom Pretoria. On 25 May 2017 at 10:00 am for a period of ± 2 hours. [Respondents to provide own transportation and accommodation]. The briefing session will start punctually and information will not be repeated for the benefit of Respondents arriving late.

http://www.etenders.gov.za/

mailto:[email protected]




Page 3 of 237


A Certificate of Attendance set out in Section 8 hereto must be completed and submitted with your Quotation as proof of attendance is required for a compulsory site meeting and/or RFQ briefing.

Respondents failing to attend the compulsory site meeting and/or RFQ briefing will be disqualified

CLOSING DATE

10:00 on Thursday 15 June 2017 This tender shall close punctually at the following address: The Chairperson, Transnet Freight Rail Tender Advice Centre, Ground Floor, Tender Box in the foyer Nzasm Building, Corner of Paul Kruger and Minaar Street Pretoria, 0001 As a general rule, if a bid is late or delivered to the incorrect address, it will not be accepted for consideration.

VALIDITY PERIOD

End of validity period: 23 October 2017 Bidders are to note that they may be requested to extend the validity period of their bid, on the same terms and conditions, if the internal evaluation process has not been finalised within the validity period.

SUPPLIER REGISTRATION ON THE NATIONAL

TREASURY CENTRAL SUPPLIER DATABASE (CSD)

In terms of paragraph 3 of the NATIONAL TREASURY SCM INSTRUCTION NO 4 OF 2016/2017, which became effective on 1 May 2016, Transnet must ensure that 3.1.1 Suppliers are registered on the Central Supplier Database [CSD] before any procurement related activities commences; 3.1.2 The CSD can be used as the single on only list of prospective suppliers for Transnet Furthermore, according to paragraph 5.6 5.6 Transnet may only award bids to suppliers after verifying that the supplier is registered as prospective suppliers on the National Treasury

Central Supplier Database. Please ensure that you register your company on the CSD by following these steps:

Step 1: Access the CSD site on https://secure.csd.gov.za/ Step 2: Register a new CSD account

https://secure.csd.gov.za/Account/Register Step 3: Receive an activation email and click activate account Step 4: Activate account by requesting and entering the OTP Step 5: Log in the CSD Step 6: Complete supplier identification information Step 7: Complete contact information Step 8: Complete address information Step 9: Complete bank account information Step 10: Complete tax information Step 11: Complete directors/members information (if non-CIPC company)

Step 12: Complete associations (if relevant) Step 13: Complete commodities information Step 14: Complete B-BBBEE information (future phase) Step 15: Maintain users Step 16: Complete notification information Step 17: Complete accreditations Step 18: Click on submit

Step 19: A CSD supplier number and unique registration reference number is auto-generated and communicated

https://secure.csd.gov.za/

https://secure.csd.gov.za/Account/Register



Page 4 of 237


2 Responses to RFQ

Responses to this RFQ [Quotations] must not include documents or reference relating to any other

quotation or proposal. Any additional conditions must be embodied in an accompanying letter.

3 COMPULSORY LOCAL CONTENT THRESHOLD

In terms of section 8(1) of the Preferential Procurement Regulations, 2017, and the Instruction Note issued

by National Treasury on the “Invitation and Evaluation of Bids based on a stipulated minimum threshold for

local content and production for the Clothing Sector,” Transnet is required to set a stipulated minimum

threshold be set for this RFQ.

3.1 Local Content Threshold

A Local Content threshold of 100% [hundred percent] will be required for the goods specified in SBD 6.2 to

be manufactured by a successful Respondent from month 1 [one] of the contract period for the remainder of

the contract term.

For further guidance with regard to the determination of “Local Content,” Respondents must refer to

the following documentation

SABS approved technical specification number SATS 1286:2011

Guidance on the calculation of Local Content

[available on the DTI website: http://www.thedti.gov.za]

3.2 Mandatory RFQ Annexures

The regulatory and mandatory RFQ Annexures, which must be completed by all Respondents in order

to declare Local Content, are as follows:

Annexure B – Declaration Certificate for Local Production and Content [SBD 6.2]

Annexure C – Local Content Declaration: Summary Schedule

Failure to duly complete all sections, declare the local content threshold per item, sign and submit both the Mandatory Returnable Documents at the Closing Date and time of this RFQ will result in a Respondent’s disqualification

Annexures D and E are Supporting Schedules to Annexure C. They are named as follows:

Annexure D – Imported Content Declaration: Supporting Schedule to Annexure C

Annexure E – Local Content Declaration: Supporting Schedule to Annexure C

After completing Declaration D, bidders should complete Declaration E and then consolidate the

information on Declaration C. Declaration C should be submitted with the bid documentation at the

closing date and time of the bid. Declarations D and E should be kept by Respondents for verification

purposes for a period of at least 5 years. The successful Respondent is required to continuously

update Declarations C, D and E with the actual values for the duration of the contract. In addition to

what is stated above regarding Annexures D and E, please note that these declarations are to be

submitted as part of the Essential Returnable Documents - See Section 2 of RFQ.

3.3 Challenges meeting the Local Content Threshold

http://www.thedti.gov.za/



Page 5 of 237


If the raw material of input to be used for a specific item is not available locally, bidders should to obtain written authorisation from the dti should there be a need to import such raw material or input; and

A copy of the authorisation letter must be submitted together with the bid document at the closing date and time of the bid. For further information, bidders may contract the Clothing, Textile, Footwear and Leather Unit within the dti: Patrick Khumalo ([email protected]) – 012 394 3717

Abisha Tembo ([email protected]) – 012 394 1390

Should, after the award of a Bid, the Supplier experience challenges in meeting the stipulated

minimum threshold for Local Content, Transnet is required to inform the DTI accordingly in order for

the DTI to verify the circumstances and provide directives in this regard.

3.4 Local Content Obligations

Respondents are to note that the Local Content commitments made by the successful Respondent(s)

will be incorporated as a term of the contract and monitored for compliance. Should the successful

Respondent fail to meet its Local obligations, non compliance penalties shall be applicable as per the

contract or Standard RFQ Terms and Conditions for the Supply of Goods and Services. Breach of Local

Content obligations also provide Transnet cause to terminate the contract in certain cases where

material non compliance with Local Content requirements are not achieved.

4 Broad-Based Black Economic Empowerment [B-BBEE]

Transnet fully endorses and supports the Government’s Broad-Based Black Economic Empowerment

Programme and it would therefore prefer to do business with local business enterprises who share these

same values. As explained in more detail in the B-BBEE Preference Point Claim Form (Section 6), Transnet

will award preference points to companies who provide valid proof of their B-BBEE status using either the

latest version of the generic Codes of Good Practice or Sector Specific Codes (if applicable).

The value of this bid is estimated to be below R50 000 000 (all applicable taxes included); and therefore the

80/20 system shall be applicable.

Respondents are required to complete Section 6 and submit it together with valid proof of their B-BBEE

Status as stipulated in the Claim Form in order to obtain preference points for their B-BBEE status.

Respondents are required at all times to comply with the latest B-BBEE legislation and/or instruction notes as

issued from time to time by the DTI.

Note: Failure to submit valid and original (or a certified copy of) proof of the

Respondent’s compliance with the B-BBEE requirements stipulated in Section 6 of this

RFQ (the B-BBEE Preference Points Claim Form) at the Closing Date of this RFQ, will

result in a score of zero being allocated for B-BBEE.

Respondents are required to submit proof of the subcontracting arrangement between themselves

and the subcontractor. Proof of the subcontracting arrangement may include a subcontracting

agreement.

Respondents are to note that it is their responsibility to select competent subcontractors that meet all

requirements of the bid so that their bid is not jeopardised by the subcontractor when evaluated.

Respondents are responsible for all due diligence on their subcontractors.





Page 6 of 237


If contemplating subcontracting, a Respondent will not be awarded points for B-BBEE if it is indicated

in its Proposal that such Respondent intends subcontracting more than 25% [twenty-five percent] of

the value of the contract to an entity/entities that do not qualify for at least the same points that the

Respondent qualifies for, unless the intended subcontractor is an EME with the capability to execute

the contract.

Respondent/s are discouraged from subcontracting with their subsidiary companies as this may be

interpreted as subcontracting with themselves and / or using their subsidiaries for fronting. Where a

Respondent intends to subcontract with their subsidiary this must be declared in their bid response.

The successful Respondent awarded the contract may only enter into a subcontracting arrangement

with Transnet’s prior approval.

The contract will be concluded between the successful Respondent and Transnet, therefore, the

successful Respondent and not the sub-contractor will be held liable for performance in terms of its

contractual obligations.

A Respondent awarded a contract may not subcontract in such a manner that the local production

and content of the overall value of the contract is reduced to below the stipulated minimum

threshold.

A person awarded a contract may not subcontract more than 25% [twenty-five percent] of the value

of the contract to any other enterprise that does not have an equal or higher B-BBEE status level than

the person concerned, unless the contract is subcontracted to an EME that has the capability and

ability to execute the subcontract.

In terms of Section 6 of this RFQ [the B-BBEE Preference Point Claim Form] Respondents are required

to indicate the percentage of the contract that will be sub-contracted as well as the B-BBEE status of

the sub-contractor/s.

4.1 Exempted Micro Enterprises & Qualifying Small Enterprises

Transnet has set a prequalification criterion that only Exempted Micro Enterprises (EMEs) and/or

Qualifying Small Enterprises may participate in this RFQ process. A bid that fails to meet this pre-

qualifying criteria will be regarded as an unacceptable bid.

4.2 Minimum B-BBEE level

Transnet has set a minimum B-BBEE threshold for participation in this RFQ process. The minimum B-

BBEE threshold in this instance is a B-BBEE Level 4. A bid that fails to meet this pre-qualifying criteria

will be regarded as an unacceptable bid.

4.3 Prequalification criteria for Preferential Procurement

Respondents are to note that they are eligible to participate in this RFQ should they meet the

prequalification criteria for preferential procurement stipulated in paragraphs 3.1, 3.2

COMMUNICATION

Respondents are warned that a response will be liable for disqualification should any attempt be made by a

Respondent either directly or indirectly to canvass any officer(s) or employee of Transnet in respect of this

RFQ between the closing date and the date of the award of the business.



Page 7 of 237


For specific queries relating to this RFQ (prior to the tender closing), the tender administrator can be

contacted directly, while also informing the secretary of the Acquisition Council of the communication.

Tender Administrator

Name: Ntuthuko Nhlapo Email: [email protected]

Telephone: 013 658 2475

and

Secretary of the Acquisition Council

Name: Prudence Nkabinde Email: [email protected]

Telephone: 011-584 0821

After the closing date of the RFQ, a Bidder may only communicate with the Rail Secretariat of the Transnet

Freight Rail Acquisition Council, on any matter relating to its RFQ Proposal.

Name: Prudence Nkabinde Email: [email protected]

Telephone: 011-584 0821

5 Legal Compliance

The successful Respondent shall be in full and complete compliance with any and all applicable national and

local laws and regulations.

6 Changes to Quotations

Changes by the Respondent to its submission will not be considered after the closing date and time.

7 Pricing

All prices must be quoted in South African Rand on a fixed price basis, excluding VAT.

8 Prices Subject to Confirmation

Prices quoted which are subject to confirmation will not be considered.

9 Binding Offer

Any Quotation furnished pursuant to this Request shall be deemed to be an offer. Any exceptions to this

statement must be clearly and specifically indicated.

10 Disclaimers

Respondents are hereby advised that Transnet is not committed to any course of action as a result of its

issuance of this RFQ and/or its receipt of Proposals. In particular, please note that Transnet reserves the

right to:

10.1 modify the RFQ’s goods / service(s) and request Bidders to re-bid on any changes;

10.2 reject any Quotation which does not conform to instructions and specifications which are detailed

herein;

10.3 disqualify Quotations submitted after the stated submission deadline;

10.4 not necessarily accept the lowest priced Quotation or an alternative bid;

10.5 reject all Quotations, if it so decides;

10.6 place an order in connection with this Quotation at any time after the RFQ’s closing date;

10.7 award only a portion of the proposed goods / service/s which are reflected in the scope of this RFQ;



Page 8 of 237


10.8 split the award of the order/s between more than one Supplier/Service Provider should it at

Transnet’s discretion be more advantageous in terms of, amongst others, cost or developmental

considerations;

10.9 make no award at all;

10.10 validate any information submitted by Bidders in response to this bid. This would include, but is not

limited to, requesting the Bidders to provide supporting evidence. By submitting a bid, Bidders

hereby irrevocably grant the necessary consent to Transnet to do so;

10.11 request audited financial statements or other documentation for the purposes of a due diligence

exercise;

10.12 not accept any changes or purported changes by the Bidder to the bid rates after the closing date

and/or after the award of the business, unless the contract specifically provides for it;

10.13 award the business to the next highest ranked bidder, should the preferred bidder fail to sign or

commence with the contract within a reasonable period after being requested to do so, provided

that the preferred bidder is still prepared to provide the required goods at the quoted price.

Under such circumstances, the validity of the bids of the next ranked bidder(s) will be deemed to

remain valid, irrespective of whether the next ranked bidder(s) were issued with a Letter of Regret.

Bidders may therefore be requested to advise whether they would still be prepared to provide the

required goods at their quoted price, even after they have been issued with a Letter of Regret;

10.14 not clarify the price as submitted in case of arithmetical errors, given time restrictions;

10.15 cancel the contract and/or place the Bidder on Transnet’s list of Restricted Suppliers, should a

contract be awarded on the strength of information furnished by the Bidder, which after conclusion

of the contract, is proved to have been incorrect;

10.16 award business to the highest scoring bidder/s unless objective criteria justifies the award to

another bidder; and/or

10.17 undertake post-tender negotiations [PTN] with selected Bidders or any number of short-listed

Bidders. Such PTN can include, at Transnet’s option, any evaluation criteria listed in this RFQ

document. In the event of any Bidder being notified of such short-listed/preferred bidder status, his

bid, as well as any subsequent negotiated best and final offers (BAFO), will automatically be

deemed to remain valid during the negotiation period and until the ultimate award of business.

Kindly note that Transnet will not reimburse any Respondent for any preparatory costs or other work

performed in connection with its Proposal, whether or not the Respondent is awarded a contract.

11 Specification/Scope of Work

Refer to Section 3, Quotation Form for Specification of Goods. Also refer to Annexure F which is a guideline

on how the Local Content returnable documents should be completed as well as the attached National

Treasury Instruction Note regarding the Textile, Clothing, Leather and Footwear designated sector



Page 9 of 237


12 Respondent’s Samples

Respondents are to note that Transnet reserves the right to evaluate the preferred bidders' samples to verify

the declarations made on the Local Content items

13 Legal review

A Proposal submitted by a Respondent will be subjected to review and acceptance or rejection of its

proposed contractual terms and conditions by Transnet’s Legal Counsel, prior to consideration for an award

of business.

14 Security clearance

Acceptance of this bid could be subject to the condition that the Successful Respondent, its personnel

providing the goods and its subcontractor(s) must obtain security clearance from the appropriate authorities

to the level of CONFIDENTIAL/ SECRET/TOP SECRET. Obtaining the required clearance is the responsibility

of the Successful Respondent. Acceptance of the bid is also subject to the condition that the Successful

Respondent will implement all such security measures as the safe performance of the contract may require.

15 National Treasury’s Central Supplier Database

Respondents are required to self-register on National Treasury’s Central Supplier Database (CSD) which has

been established to centrally administer supplier information for all organs of state and facilitate the

verification of certain key supplier information. Transnet is required to ensure that price quotations are

invited and accepted from prospective bidders listed on the CSD. Business may not be awarded to a

Respondent who has failed to register on the CSD. Only foreign suppliers with no local registered entity need

not register on the CSD. The CSD can be accessed at https://secure.csd.gov.za/. Respondents are required

to provide the following to Transnet in order to enable it to verify information on the CSD:

Supplier Number: ____________ Unique registration reference number: _____________.

16 Tax Compliance

Respondents must be compliant when submitting a proposal to Transnet and remain compliant for the entire

contract term with all applicable tax legislation, including but not limited to the Income Tax Act, 1962 (Act

No. 58 of 1962) and Value Added Tax Act, 1991 (Act No. 89 of 1991).

It is a condition of this RFQ that the tax matters of the successful bidder be in order, or that satisfactory

arrangements have been made with South African Revenue Service (SARS) to meet the bidder’s tax

obligations.

The Tax Compliance status requirements are also applicable to foreign bidders / individuals who wish to

submit bids as indicated in paragraph 16.2 below.

It is a requirement that Respondents grant a written confirmation when submitting this bid that SARS may

on an ongoing basis during the tenure of the contract disclose the Respondent’s tax compliance status and

by submitting this bid such confirmation is deemed to have been granted.

Respondents are required to be registered on the Central Supplier Database as indicated in paragraph 15

and the National Treasury shall verify the Respondent’s tax compliance status through the Central Supplier

Database.



Page 10 of 237


Where Consortia / Joint Ventures / Sub-contractors are involved, each party must be registered on the

Central Supplier Database and their tax compliance status will be verified through the Central Supplier

Database.

16.1 New Tax Compliance Status (TCS) System

SARS has implemented a new Tax Compliance Status (TCS) system in terms of which a taxpayer is now able

to authorise any 3rd party to verify its compliance status in one of two ways: either through the use of an

electronic access PIN, or through the use of a Tax Clearance Certificate obtained from the new TCS system.

Respondents are required to provide the following to Transnet in order to enable it to verify their tax

compliance status:

Tax reference number: _______________

Tax Clearance Certificate & TCC Number: ____________ and PIN: _____________.

16.2 Tax Compliance Requirements for Foreign Entities

Where foreign bidders with no presence in South Africa, seek to obtain a Tax Clearance Certificate in order

to meet the tax compliance requirements mentioned in 1 above, they must confirm an answer of “No” to all

questions below:

a) Is the entity a tax resident of the Republic of South Africa (RSA)?

b) Does the entity have a branch/locally registered entity in the RSA?

c) Does the entity have a permanent establishment in the RSA?

d) Does the entity have any source of income (income is defined as per the Income Tax Act 58 of

1962 as the amount remaining of the gross income of any person for any year or period of

assessment after deducting therefrom any amounts exempt from normal tax under Part I of

Chapter II of the Act) in the RSA in the current tax year?

e) Is the entity liable in the RSA for any form of taxation in the current tax year?

Where a foreign entity’s answer to all questions above is “No”, such entities are required to submit an

application to SARS using the following email address: [email protected] and providing the

following information to SARS:

• Details of the Foreign entity;

• Description of the service being provided; and

• Name of the South African Government Institution to whom the service is being provided.

SARS will consider this request and will then provide a scanned copy of the Tax Clearance Certificate which

must be provided to Transnet with the Respondent’s bid submission.

If a Respondent’s answers to any one (or more) of the questions in a) to e) above changes to a “Yes” at any

time during the bid process and/or after award of the contract (should a particular Respondent be

successful), then the Respondent undertakes to comply with its tax obligations and to report to Transnet

accordingly.




Page 11 of 237


17 Protection of Personal Data

In responding to this bid, Transnet acknowledges that it may obtain and have access to personal data of the

Respondents. Transnet agrees that it shall only process the information disclosed by Respondents in their

response to this bid for the purpose of evaluating and subsequent award of business and in accordance with

any applicable law. Furthermore, Transnet will not otherwise modify, amend or alter any personal data

submitted by Respondents or disclose or permit the disclosure of any personal data to any Third Party

without the prior written consent from the Respondents. Similarly, Transnet requires Respondents to process

any personal information disclosed by Transnet in the bidding process in the same manner. The detailed

mutual duties of Transnet and the Respondents to protect personal information is contained in paragraph 37

of the General Bid Conditions.

Transnet urges its clients, suppliers and the general public to report any fraud or corruption to

TIP-OFFS ANONYMOUS : 0800 003 056

Transnet Request for Quotation No Erac-Var-23795 of 237 RFQ for the Supply and Delivery of Protective Clothing and Safety Equipment on an ‘As and When’ Required Basis to Ermelo, Witbank, Nelspruit, Ogies and Welgedacht for a Period of 9 Months. Page 12 of 237

Page 12 of 237 Returnable Document

_________________________ ____________________________

Respondent’s Signature Date & Company Stamp

RFQ FOR THE SUPPLY AND DELIVERY OF PROTECTIVE CLOTHING AND SAFETY EQUIPMENT

ON AN ‘AS AND WHEN’ REQUIRED BASIS TO ERMELO, WITBANK, NELSPRUIT, OGIES AND

WELGEDACTH FOR A PERIOD OF 9 MONTHS

CLOSING VENUE: TRANSNET FREIGHT RAIL TENDER ADVICE CENTRE GROUND FLOOR,

NZASM BUILDING ROOM G16, CORNER OF PAUL KRUGER AND MINAAR STREET, PRETORIA

0001

CLOSING DATE & TIME: 15 JUNE 2017, THURSDAY AT 10:00 AM

VALIDITY PERIOD: 23 OCTOBER 2017

SECTION 2

EVALUATION CRITERA AND RETURNABLE DOCUMENTS

18 EVALUATION METHODOLOGY

Transnet will utilise the following methodology and criteria in selecting a preferred Supplier/s, if so

required:

NB: Evaluation of the various stages will normally take place in a sequential manner. However, in order to

expedite the process, Transnet reserves the right to conduct the different stages of the evaluation process in

parallel. In such instances the evaluation of bidders at any given stage must not be interpreted to mean that

bidders have necessarily passed any previous stage(s).

Pre-qualification Stage 1 Stage 2

i. Post tender

negotiation (if

applicable)

requesting best &

final offer.

ii. Final evaluation

in terms of 80/20

Step 1 Step 2 Step 3 Step 5 Step 4 Step 6

Administrative

Responsiveness

100 %

Minimum

Threshold

Weighted

Scoring /100

Negotiation of

final terms &

conditions of

contract

including SD,

B-BBEE

Improvement

Plan with

successful

bidder

Substantive test

RETURNABLE

DOCUMENTS &

SCHEDULES

PRE-

QUALIFICATION

LOCAL CONTENT WEIGHTED

SCORE

POST TENDER

NEGOTIATION &

FINAL WEIGHTED

SCORE

FINAL AWARD

Price (80%) B-BBEE

(20%) Scorecard



_________________________ ____________________________


19 Evaluation Criteria

Transnet will utilise the following criteria [not necessarily in this order] in choosing a Supplier/Service

Provider, if so required:

Criterion/Criteria Explanation

Administrative

responsiveness

Completeness of response and returnable documents

Submission of Mandatory Documents / Schedules

Submission of Essential Documents / Schedules

All pages of the bid submission is signed by the Bidder/Bidder

Substantive

responsiveness

Whether the Bid conforms to all the terms, conditions, scope and/or specification of the bid document/s without material deviations or

qualifications ~ a clause by clause declaration to specification

Whether the Bid contains a priced offer

Whether the supplier is registered on the NT Central Supplier Database (CSD)

Whether all pre-qualification eligibility criteria set have been met:

‒ Minimum B-BBEE threshold, Level 4

‒ Compulsory briefing session attendance certificate, signed by a Transnet official. Section 8

‒ Exempted Micro Enterprises (EMEs) and / or Qualifying Small Enterprises (QSEs)

Local Content

Threshold

This RFQ is subject to regulation 8 (1) of the Preferential Procurement

Regulations, 2017 issued in terms of the Preferential Procurement Policy

Framework Act as [Clothing sector] has been designated for local production

and content. As such, Respondents will be required to meet a stipulated minimum

threshold for local production and content as stipulated in the relevant Instruction

Note issued by National Treasury. The stipulated minimum threshold/s applicable

is/are as follows:

100%.

‒ Local Content (i.e. Annexure B and C)

Final weighted

evaluation based

on 80/20

preference point

Pricing and price basis [firm]

B-BBEE status of company - Preference points will be awarded to a bidder for

attaining the B-BBEE status level of contribution in accordance with the table

indicated in Section 6: B-BBEE Claim Form.

20 Validity Period

Transnet requires a validity period of 90 [Ninety] Business Days from the closing date of this RFQ.

Bidders are to note that they may be requested to extend the validity period of their bid, on the same

terms and conditions, if the internal evaluation process has not been finalised within the validity period.

However, once the adjudication body has approved the process and award of the business to the



_________________________ ____________________________


successful bidder(s), the validity of the successful bidder(s)’ bid will be deemed to remain valid until a

final contract has been concluded.

With regard to the validity period of short-listed bidders, please refer to Section 1, paragraph 10.

21 Disclosure of Prices Quoted

Respondents are to note that, on award of business, Transnet is required to publish the tendered prices

and preferences claimed of the successful and unsuccessful Respondents inter alia on the National

Treasury e-Tender Publication Portal, (www.etenders.gov.za), as required per National Treasury

Instruction Note 01 of 2015/2016.

22 Returnable Documents

Returnable Documents means all the documents, Sections and Annexures, as listed in the tables

below.

All Returnable Sections, as indicated in the header and footer of the relevant pages, must be

signed, stamped and dated by the Respondent.

a) Respondents are required to submit with their Quotations the mandatory Returnable

Documents, as detailed below.

Failure to provide all these Mandatory Returnable Documents at the Closing Date and

time of this RFQ will result in a Respondent’s disqualification. Respondents are

therefore urged to ensure that all these Documents are returned with their Quotations.

Please confirm submission of these mandatory Returnable Documents by so indicating [Yes or No]

in the tables below:

Mandatory Returnable Documents Submitted

[Yes or No]

SECTION 3 : Quotation Form with price

Proof of CSD registration (National Treasury Supplier Database)

Attendance certificate of compulsory briefing session, signed by Transnet official

, Section 8

ANNEXURE B – Declaration Certificate for Local Production and Content [SBD6.2]

ANNEXURE C – Local Content Declaration: Summary Schedule

ANNEXURE A : Clause by Clause declaration to Specification

Minimum B-BBEE threshold, Level 4)

Exempted Micro Enterprises (EMEs) and / or Qualifying Small Enterprises (QSEs)

http://www.etenders.gov.za/



_________________________ ____________________________


b) Essential Returnable Documents

In addition to the requirements of section (a) above, Bidders are further required to submit with their

Proposals the following Essential Returnable Documents as detailed below.

If Essential Returnable Documents are used for purposes of scoring a bid, failure to submit these documents by the closing date and time of this bid will not automatically result in a Bidder’s disqualification. However, Bidders will receive an automatic score of zero for the applicable evaluation criterion.

If Essential Returnable Documents are not related to evaluation criteria, failure to provide these documents may result in a respondent’s disqualification.

Bidders are therefore urged to ensure that all these documents are returned with their Proposals.

ESSENTIAL RETURNABLE DOCUMENTS USED FOR SCORING SUBMITTED [Yes or No]

Valid and original (or a certified copy) proof of Bidder’s compliance to B-BBEE requirements stipulated in Section 6 of this RFQ

In the case of Joint Ventures, a copy of the Joint Venture Agreement or written confirmation of the intention to enter into a Joint Venture Agreement

Latest Financial Statements signed by your Accounting Officer or latest Audited Financial Statements plus 2 previous years

Tax Clearance Certificate or electronic access PIN obtained from SARS’s new Tax Compliance Status (TCS) system

[Consortia / Joint Ventures must submit a separate Tax Clearance Certificate/PIN for each party]

SECTION 4: Certificate of Acquaintance with RFQ Documents

SECTION 5: RFQ Declaration and Breach of Law Form

SECTION 6: B-BBEE Preference Claim Form

23 CONTINUED VALIDITY OF RETURNABLE DOCUMENTS

The successful Respondent will be required to ensure the validity of all returnable documents, including but not

limited to its Tax Clearance Certificate and valid B-BBEE Verification Certificate, for the duration of any contract

emanating from this RFQ. Should the Respondent be awarded the contract [the Agreement] and fail to

present Transnet with such renewals as and when they become due, Transnet shall be entitled, in addition to

any other rights and remedies that it may have in terms of the eventual Agreement, to terminate such

Agreement forthwith without any liability and without prejudice to any claims which Transnet may have for

damages against the Respondent.

Transnet Request for Quotation No Erac-Var-23795 of 237 RFQ for the Supply and Delivery of Protective Clothing and Safety Equipment on an ‘As and When’ Required Basis to Ermelo, Witbank, Nelspruit, Ogies and Welgedacht for a Period of 9 Months.


_________________________ ____________________________


SECTION 3

QUOTATION FORM AND CERTIFICATE OF ACQUAINTANCE WITH RFQ DOCUMENT

I/We_________________________________________________________________________________

hereby offer to supply the goods/services at the prices quoted in the Price Schedule below, in accordance with the conditions related thereto.

I/We agree to be bound by those terms and conditions in:

the Standard RFQ Terms and Conditions for the Supply of Goods or Services to Transnet; OR Master Agreement; and

any other standard or special conditions mentioned and/or embodied in this Request for Quotation.

I/We accept that unless Transnet should otherwise decide and so inform me/us, this Quotation [and, if any, its covering letter and any subsequent exchange of correspondence],

together with Transnet’s acceptance thereof shall constitute a binding contract between Transnet and me/us. I/We further agree that if, after I/we have been notified of the

acceptance of my/our Quotation, I/we fail to deliver the said goods/service/s within the delivery lead-time quoted, Transnet may, without prejudice to any other legal remedy which it

may have, cancel the order and recover from me/us any expenses incurred by Transnet in calling for Quotations afresh and/or having to accept any less favourable offer.

Price Schedule

I/We quote as follows for the goods required, on a “delivered nominated destination” Ermelo, Witbank, Nelspruit, Ogies and Welgedacht basis, excluding VAT:

Item Long Description Image Description Unit of

Measure Unit Price Excl. VAT

Unit Price Incl. VAT

1

CREAM, BARRIER, INGREDIENT AND STRENGTH SPF 40, CONTAINER, CAPACITY 200 ML, PROTECTION PROVIDED ULTRAVIOLET, CONTAINER TYPE BOTTLE, PLASTIC, NON STICKY; EASILY ABSORBED; WATER RESISTANT.

No image CREAM BARRIER;NIVEA OR EQUIVALENT,SPF 40, 200 ML

EA

2

PROTECTOR, HEARING; TYPE EARMUFFS, DECIBEL (DB) NNR 21, COLOR VARIOUS, MATERIAL FOAM/POLYVINYL CHLORIDE/RUBBER, PACKAGE TYPE BOX; P/N: MSA 30170 MSA (AFRICA) (PTY) LT; SPECIFICATION NUMBER SABS 1451/LATEST PART I & EN 352 TYPE 1, AURAL,SOUND

PROTECTOR HEARNG;EARMUFFS,NNR 21,VARIOUS

PR



_________________________ ____________________________


Item Long Description Image Description

Unit of Measure

Unit Price Excl. VAT


3

PLUG, EAR; TYPE COMPRESSION, MATERIAL RUBBER, DIMENSIONS 600 CONNECTION CORD MM, SPECIAL FEATURES NNR 25 DB, PACKAGE TYPE CONTAINER WITH LID; SPECIFICATION NUMBER SABS 1451/1988 PART 2; SUPPLIED IN PAIRS

PLUG EAR; COMPRESSION, RUBBR, NNR 25 DB

PR

4

PROTECTOR, HEARING; TYPE NOISE CLIPPER, DECIBEL (DB) 85-120 DB, COLOR VARIOUS COLOURS, MATERIAL ACRYLIC, FEATURES SET FILTER, FURNISHED ITEMS CLEANING CLOTH AND WAX REMOVER, PACKAGE TYPE POUCH; SPECIFICATION SABS 1451-2:1988 PERSONAL HEARING PROTECTOR SET FOR MAXIMUM ATTENUATION

PROTECTOR HEARNG;NOISE CLIPPER,85-120 DB

PR

5

PROTECTOR, HEARING; TYPE TACTICAL PRO, DECIBEL (DB) 26 DB, COLOR BLACK, MATERIAL PLASTIC/STEEL, FEATURES ADJUSTABLE VOLUME, PACKAGE TYPE HEAVY DUTY CARRYING BAG; FOLDING HEADBAND

PROTECTOR HEARNG;TACTICAL PRO,26 DB EA

6

CAP, UTILITY; WELDER; SPECIFICATION NUMBER CSS 286.27/LATEST; STYLE CP 56; "OXFORD BLUE"DRILL; SHALL HAVE THREE SHAPED PANELS THAT FORM THE CROWN AND A FLAP

CAP,WORK,WELDER EA

7

BALACLAVA; TYPE OPEN FACE, COMMERCIAL SIZE ONE SIZE FITS ALL, MATERIAL ACRYLIC, COLOR BLACK, SPECIAL FEATURES EXTREME COLD WEATHER KNIT TYPE, PLAIN (STITCH), WEIGHT, 110 GRAMS

BALACLAVA;OPEN FACE,ONE SIZE FITS ALL EA



_________________________ ____________________________



Unit of Measure



8

HAT, UTILITY; TYPE BUSH, STYLE FLOPPY, COLOR STEWART BLUE, MATERIAL COTTON D59, SPECIAL FEATURES TRANSNET LOGO, PACKAGE TYPE PLASTIC ENVELOPE; SPECIFICATION: CSS 286.21 G32/SEPTEMBER 2007, PACK OF 10, REFERENCE ITEM NO. 35/113686 CUT, MAKE AND TRIM CLOTH STOCK ITEM NO. 35/3492

HAT UTLTY;BUSH,FLOPPY,52 CM,STEWART BLUE

EA

9


EA

10


EA

11


EA

12


EA

13


EA

14


EA

15

BOOTS, SAFETY; TYPE CHUKKA OR EQUIVALENT,

FOOTWEAR, TOE TYPE STEEL CAP, MATERIAL CORRECTED GRAIN LEATHER UPPER, COLOR BLACK, FASTENING METHOD D-RING/LACE, SOLE MATERIAL DUAL DENSITY POLYURETHANE; SPECIFICATION: CSS 287.108/JULY 2011, SANS 20345/LATEST, REFERENCE NO: 35/113512 , RANDOM WEB FABRIC INSOLE; STEEL OR PLASTIC SHANK.

BOOTS SFTY;CHUKKA OR EQUIVALENT,225 (3),STEEL CAP PR

16


17


18


19


20

BOOTS SFTY;CHUKKA OR EQUIVALENT,262 (8),STEEL CAP

PR

21


PR



_________________________ ____________________________


22


PR

23


PR




24 BOOTS, SAFETY; TYPE CHUKKA OR EQUIVALENT, FOOTWEAR, TOE TYPE STEEL CAP, MATERIAL CORRECTED GRAIN LEATHER UPPER, COLOR BLACK, FASTENING METHOD D-RING/LACE, SOLE MATERIAL DUAL DENSITY POLYURETHANE; SPECIFICATION: CSS 287.108/JULY 2011, SANS 20345/LATEST, REFERENCE NO: 35/113512 , RANDOM WEB FABRIC INSOLE; STEEL OR PLASTIC SHANK.


PR

25 BOOTS SFTY;CHUKKA OR EQUIVALENT,300 (13),STEEL CAP

PR


PR


PR

28 BOOTS SFTY;CHUKKA OR EQUIVALENT, SPCL,STEEL CAP

PR



_________________________ ____________________________


29

BOOTS, SAFETY; FOOTWEAR, GENDER MALE, TOE TYPE EXTRA WIDE STEEL CAP, 200J RESISTANT, MATERIAL BARTAN LEATHER UPPER, COLOR BLACK, FASTENING METHOD D-RING/LACE-UP, SOLE MATERIAL DOUBLE DENSITY POLYURETHANE

No image

BOOTS SAFETY;10,MALE PAA

30 BOOTS SAFETY;11,MALE PAA







37

BOOTS, SAFETY; TYPE CHUKKA OR EQUIVALENT, FOOTWEAR, GENDER FEMALE, TOE TYPE STEEL TOE CAP, MATERIAL CORRECTED GRAIN LEATHER UPPER, COLOR BLACK, FASTENING METHOD D-RING/LACE, SOLE MATERIAL DUAL DENSITY POLYURETHANE, PACKAGE TYPE BOX; SPECIFICATION: CSS 287.108 / JULY 2011, SANS 20345/LATEST, REFERENCE NO: 35/154792 UNKNOWN, RANDOM WEB FABRIC INSOLE; STEEL OR PLASTIC SHANK; ACID/OIL RESISTANT HEEL/SOLE

BOOTS SFTY;CHUKKA OR EQUIVALENT,225 (3),FEM,BLACK

PR

38

BOOTS SFTY;CHUKKA OR EQUIVALENT,232 (4),FEM,STEEL CAP

PR

39


PR

40


PR

41


PR

42


PR



_________________________ ____________________________


43

BOOTS, SAFETY; TYPE CHUKKA OR EQUIVALENT, FOOTWEAR, GENDER FEMALE, TOE TYPE STEEL TOE CAP, MATERIAL CORRECTED GRAIN LEATHER UPPER, COLOR BLACK, FASTENING METHOD D-RING/LACE, SOLE MATERIAL DUAL DENSITY POLYURETHANE, PACKAGE TYPE BOX; SPECIFICATION: CSS 287.108 / JULY 2011, SANS 20345/LATEST, REFERENCE NO: 35/154792 UNKNOWN, RANDOM WEB FABRIC INSOLE; STEEL OR PLASTIC SHANK; ACID/OIL RESISTANT HEEL/SOLE


PR

44


PR

45 BOOTS SFTY;CHUKKA OR EQUIVALENT, SPCL,FEM,STEEL CAP

PR

46

BOOTS, SAFETY; TYPE CHAKKA OR EQUIVALENT, FOOTWEAR.GENDER UNISEX, NO TOE PUFF, CHROME TANNED LEATHER, BLACK. EYELETS/HOOKS OR D-RING/LACE-UP, SOLE DUAL NON DENSITY POLYURETHANE, SHANK REINFORCEMENT MOLDED INTO MIDSOLE

BOOTS, NON-STEEL TOE CAP SIZE 240 (5) PR

47 BOOTS, NON-STEEL TOE CAP SIZE 247 (6) PR






53


54




_________________________ ____________________________



Unit of Measure



55

BOOTS, SAFETY; FOOTWEAR SIZE 10, GENDER MALE, TOE TYPE EXTRA WIDE STEEL CAP, MATERIAL LEATHER UPPER, COLOR WALNUT, FASTENING

METHOD LACE-UP-UP, SOLE MATERIAL DUAL DENSITY POLYURETHANE, SPECIAL FEATURES ACID/OIL RESISTANT;

BOOTS SAFETY;10,MALE,WALNUT PAA

56 BOOTS SAFETY;11,MALE,WALNUT PAA






62

BOOTS, SAFETY; TYPE COMBAT STYLE, FOOTWEAR, GENDER UNISEX, TOE TYPE STEEL, MATERIAL BUFFALO LEATHER, COLOR BROWN, FASTENING METHOD LACE WITH TWO BUCKLES AND STRAPS, SOLE MATERIAL VULCANIZED RUBBER, PACKAGE TYPE CORRUGATED BOX;

BOOTS SFTY;COMBAT STYLE,5,STEEL CAP PR

63 BOOTS SFTY;COMBAT STYLE,6,STL,BROWN PR






69 BOOTS SFTY;COMBAT,SPCL,STL,BROWN PR



_________________________ ____________________________


70

BOOTS, KNEE; TYPE GUM SAFETY, FOOTWEAR, MATERIAL POLYVINYL CHLORIDE, COLOR BLACK, FEATURES WITH STEEL TOE CAPS, ENVIRONMENTAL PROTECTION OIL PROTECTION; CALF LENGTH

BOOTS KNEE;GUM SAFETY,FTWR SZ 232(4), PVC

PR

71

BOOTS KNEE;GUM SAFETY,FTWR SZ 240(5),

PVC PR

72


PR

73


PR

74


PR

75


PR


Unit of Measure



76

BOOTS, KNEE; TYPE GUM SAFETY, FOOTWEAR, MATERIAL POLYVINYL CHLORIDE, COLOR BLACK, FEATURES WITH STEEL TOE CAPS, ENVIRONMENTAL PROTECTION OIL PROTECTION; CALF LENGTH

BOOTS KNEE;GUM SAFETY,FTWR SZ 277(10) PR

77 BOOTS KNEE;GUM SAFETY,FTWR SZ 285(11) PR

78 BOOTS KNEE;GUM SAFETY,FTWR SZ 292(12) PR

79

BOOTS, SAFETY; FOOTWEAR SIZE 232(4), GENDER MALE, TOE TYPE STEEL CAP, MATERIAL SMOOTH GRAIN LEATHER, COLOR BLACK, FASTENING METHOD SHOE LACE, SOLE MATERIAL DUAL DENSITY, SPECIAL FEATURES STEEL MIDSOLE, PACKAGE TYPE BOX

BOOTS SFTY;232(4),MALE PR

80 BOOTS SFTY;240(5),MALE PR







_________________________ ____________________________





88

BOOTS, SAFETY; FOOTWEAR, GENDER FEMALE, TOE TYPE STEEL CAP, MATERIAL SMOOTH GRAIN LEATHER, COLOR BLACK, FASTENING METHOD SHOE LACE, SOLE MATERIAL DUAL DENSITY, SPECIAL FEATURES STEEL MIDSOLE, PACKAGE TYPE BOX

BOOTS SFTY;228(3),FEM PR

89 BOOTS SFTY;232(4),FEM PR








Unit of Measure



96

PROTECTOR; TYPE MATAGUARD, MATERIAL POLYETHYLENE;

PROTECTOR;MATAGUARD,SIZE 5,PE PR

97 PROTECTOR;MATAGUARD,SIZE 6,PE PR



100

PROTECTOR; TYPE MATAGUARD, MATERIAL POLYETHYLENE;

PROTECTOR;MATAGUARD,SIZE 9,PE PR





_________________________ ____________________________


103

PROTECTOR; TYPE MATAGUARD, DIMENSIONS ONE SIZE FITS ALL, MATERIAL POLYETHYLENE; TO FIT BOVA 20013, FRAM 4911, LEMAITRE MAXECO; S.A. PATT APP 86/7279

No image PROTECTOR;MATAGUARD,ONE SIZE FITS ALL PAA

104

APRON, UTILITY; IMPERMEABLE; SPECIFICATION NUMBER CKS 319/LATEST; BIB/BRACE PVC COATED COTTON. BASE FABRIC TO TYPE 16 OF CKS 319-1972, COATED ONE SIDE ONLY. COATING: VIRGIN PVC POLYMER WITH HIGH GRADE COATING QUALITY, NO LESS THAN 70 "K" VALUE POLYMERS, NO FILLERS OR EXTENDERS AND A MASS OF 500 G/SQ M. TO BE OIL AND ACID RESISTANT. MAKE UP: SIZE 112 CM LONG X 84 CM WIDE AND 28 CM MIN AT TOP OF BIB. FOUR EYELETS, EACH INSERTED ON A STITCHED ON REINFORCED PATCH, 10 CM

SQUARE OR ROUNDED OF SELF MATERIAL, SHALL BE FITTED AS FOLLOWS: TWO AT THE TOP OF THE BIB AND TWO APPROX. AT WAIST HEIGHT. FOUR STRAPS, 70 CM LONG

APRON,IMPERMEABLE EA


Unit of Measure



105

APRON, BLACKSMITH'S; DRAWING NO: UTH-1714/11000 TYPE C. REV 0, SPECIFICATION NUMBER CME 72/LATEST, PART 6; LEATHER WAIST TYPE APRON; TO BE SUPPLIED WITH 2 LEATHER STRAPS AND BRASS EYELETS

APRON,BLACKSMITH, WAIST LENGTH EA



_________________________ ____________________________


106

APRON, WELDER; TYPE ARC WELDING, GARMENT SIZE WD 600 X LG 900 MM, MATERIAL CHROME LEATHER, COLOR GREY; THE APRON AND STRAPS ARE MANUFACTURED OF FULL CHROME TANNED SPLIT LEATHER OF 1.5 – 2MM SUBSTANCE Nº 25 POLYFIL CORE SPUN THREAD 9.5 X 8/05000 STEEL BIFURCATED RIVETS ARE USED IN ATTACHING STRAPS 19MM NICKEL BUCKLES THE APRON IS 120CM LONG AND 60CM WIDE IF THE APRON IS JOINED ALL STITCHING IS DONE WITH DOUBLE SEAMS AND THE SEAMS ARE STRENGTHENED WITH 4 STEEL BIFURCATED RIVETS, APPROXIMATELY 18CM APART. AN 80CM X 19MM WIDE WAIST NECK STRAP IS FIXED TO THE TOP OF THE BIB WITH A 19MM BUCKLE ON THE OPPOSITE SIDE AN 80CM X 19MM WIDE WAIST STRAP IS FIXED TO SIDE OF APRON WITH A 19MM BUCKLE ON THE APPOSITE SIDE THE LEATHER AND THREAD USED AS WELL AS THE WORKMANSHIP COMPLIES WITH THE REQUIREMENTS OF THE SABS SPECIFICATIONS FOR

INDUSTRIAL LEATHER PROTECTIVE WEAR SANS 316 OF 2002

APRON WELDER;ARC WELD,WD 600 X LG 900 MM

EA


Unit of Measure



107

APRON, WELDER'S; DRAWING NO: CME 72/LATEST PART 6 REV 0, UTH 1714/11-000/LATEST TYPE B REV 0, LEATHER SHOULDER TYPE BOTH PARTS TO BE JOINED TOGETHER ON ONE SIDE WITH 4 RIVETS AND ON THE OTHER WITH 4 PRESS STUDS, TO BE SUPPLIED WITH 2 LEATHER STRAPS AND 2 BRASS EYELETS. MATERIAL TO DRAWING

APRON,WELDER, SHOULDER TYPE EA



_________________________ ____________________________


108

APRON, WELDER'S; DRAWING NO: CME 72/LATEST PART 6 REV 0, UTH 1714/11-000/LATEST TYPE A REV 0, LEATHER 2 MM THICK SPLIT TYPE TO BE SUPPLIED WITH 4 LEATHER STRAPS 25 MM WIDE X 600 MM LONG ON THE BIB AND 6 BRASS EYELETS 5 LEATHER STRAPS 25 MM WIDE X 600 MM LONG RIVITED TO EACH LEG. MATERIAL TO DRAWING

APRON,WELDER, SPLIT TYPE EA

109

APRON, WELDER'S; TYPE BIB AND BRACE, SIZE WD 760 X LG 1220 X THK 2 MM, MATERIAL CHROME LEATHER, COLOR GRAY; EQUIPMENT USED; FOR WELDERS AND BLACKSMITHS; WITH TWO WAIST STRAPS AND ONE NECK STRAP C

APRON WLDRS;BIB AND BRACE,GRAY EA

110

SPATS; SAFETY; SPECIFICATION NUMBER SABS 316 FIGURE 14 TYPE N; SIZE: MEDUIM; WITH ANKLETS. CHROME-TANNED FLESH-SPLIT LEATHER, MINIMUM THICKNESS OF 2.0 MM TO BE SUPPLIED IN PAIRS

SPATS,SAFETY EA



_________________________ ____________________________





111

SPATS; TYPE WELDING, COMMERCIAL SIZE LONG, MATERIAL CHROME-TANNED FLESH-SPLIT LEATHER; THE LEG GUARD, STRAPS AND RE-ENFORCED TOE CAP IS MANUFACTURED OF FULL CHROME TANNED LEATHER OF FLESH SPLIT OF NOT LESS THAN 2MM SUBSTANCE Nº 25 POLYFIL CORE SPUN THREAD 9.5 X 8/05000 STEEL BIFURCATED RIVETS 19MM NICKEL

BUCKLES 7050 NICKEL PRESS STUDS THE LEG GUARD COVERS THE FOOT AND REACHES TO APPROXIMATELY 10CM BELOW THE KNEE ON EACH SIDE OF THE LEG A LEATHER POUCH OF 35MM WIDE AND 315MM LONG IS ATTACHED FOR THE INSERTION OF A MEAL OR HARD PLASTIC STRIP TO SUPPORT THE LEATHER.THE LEG GUARD IS CLOSED AROUND THE LEG WITH THREE 19MM STRAPS AND BUCKLES, AS WELL AS A STRAP AND BUCKLE UNDER THE ARCH OF THE FOOT EACH STRAP IS ATTACHED TO THE LEG GUARD BY MEANS OF TWO FEMALE PRESS STUDS ON EACH STRAP THAT CLIPS ONTO ANY OF THE THREE

MALE PRESS STUDS ON THE LEG GUARD A PRESS STUD IS PLACED ON THE INSIDE OF THE LEG GUARD TO CLOSE THE LEATHER FLAP A STITCHED DOWN RE-ENFORCED TOE CAP IS INCORPORATED ON THE INSIDE OF THE TOE PIECE LENGTH FROM TOP TO BOTTOM AT THE ANKLE 42CM FROM ANKLE TO TOP OF TOE PIECE 35CM THE LEG GUARD CONFORMS TO THE REQUIREMENTS OF THE SABS FOR INDUSTRIAL HAND PROTECTORS AND LEATHER PROTECTIVE CLOTHING SANS 316 OF 2002.

No image SPATS;WELD,LONG EA



_________________________ ____________________________


112

GLOVE; TYPE SAFETY, SIZE LARGE, LENGTH 30 CM, MATERIAL CHROME LEATHER; SPECIFICATION: SABS 316/LATEST, GAUNTLET 1.5MM THICK, UNLINED. PALM AND FINGERS FULL GRAIN WITH BACK HAND AND CUFF SPLIT, SPEC SABS 316 FIGURE 1(A) MARKING: IN ADDITION TO CLAUSE 7.2.1 AND 7.2.2 OF SABS 316 THE ITEM NUMBER 35/201031 ARE REQUIRED

GLOVE;SAFETY,L,LG 30 CM,CHROME

LEATHER,LH EA

113 GLOVE;SAFETY,L,LG 30 CM,CHROME LEATHER, RH

EA


Unit of Measure



114

GLOVES, UTILITY; TYPE PROTECTIVE, COMMERCIAL SIZE OVERALL LENGTH 30CM X LENGTH OF CUFF 10CM, MATERIAL LEATHER, SPECIAL FEATURES NAPPA; FULL CHROME TANNED LEATHER OF FLESH SPLIT AND FULL CHROMED TANNED GRAIN LEATHER, SUBSTANCE 1.3MM TO 1.5MM,Nº 25 POLYFIL CORE SPUN THREAD THE GLOVE IS MANUFACTURED FROM CHROME TANNED LEATHER ON THE PALM,FINGERS AND THUMB AND CHROME TANNED SPLIT LEATHER ON THE BACK OF THE GLOVE,THE CUFF AND THE REINFORCE.THE GLOVE HAS A SPILT GRAIN REINFORCE ON THE INSIDE OF THE PALM AND THUMB.TO SEAM BETWEEN PALM AND MIDDLE AND RING FINGER IS WELTED. FROM TIP OF MIDDLE FINGER TO SEAM BETWEEN HAND PORTION AND CUFF 20CM. ALONG SEAM BETWEEN HAND PORTION AND CUFF ACROSS NARROWEST PART OF CUFF 14CM ACROSS PALM AT CROTCH OF THUMB 13CM FROM TIP OF INDEX FINGER TO CROTCH BETWEEN THUMB AND INDEX FINGER 14CM FROM TIP OF THUMB TO CROTCH OF THUMB 9CM ALL MATERIALS USED AS WELL AS THE WORKMANSHIP COMPLIES WITH THE REQUIREMENTS OF THE SABS FOR INDUSTRIAL LEATHER PROTECTIVE WEAR SANS 316 OF 2002.PGS 6510SABS

No image GLOVES UTILITY;PROTECTIVE,LEATHER,NAPPA

PAC



_________________________ ____________________________


115

GLOVE; TYPE SAFETY, SIZE MEDIUM, LENGTH 30 CM, MATERIAL CHROME LEATHER; SPECIFICATION: SABS 316/LATEST, GAUNTLET 1.5MM THICK UNLINED.PALM AND FINGERS FULL GRAIN WITH BACK HAND AND CUFF SPLIT. FIGURE 1(A) MARKING: IN ADDITION TO CLAUSE 7.2.1 AND 7.2.2 OF SABS 316. THE ITEM NUMBER 35/201043 ARE

REQUIRED

GLOVE;SAFETY,M,LG 30 CM,CHROME LEATHER, LH

EA

116 GLOVE;SAFETY,M,LG 30 CM,CHROME

LEATHER, RH EA


Unit of Measure



117

GLOVE; TYPE SAFETY, SIZE LARGE, LENGTH 40 CM, MATERIAL CHROME LEATHER; SPECIFICATION: SABS 316/LATEST, GAUNTLET 1.5MM THICK; PARTLY LINED WITH COTTON CLOTH, FIGURE 1 (B)

MARKING: IN ADDITION TO CLAUSE 7.2.1 AND 7.2.2 OF SABS 316 THE ITEM NUMBER 35/201119 ARE REQUIRED

GLOVE;SAFETY,L,LG 40 CM,CHROME

LEATHER, LH EA

118 GLOVE;SAFETY,L,LG 40 CM,CHROME LEATHER, RH

EA

119

GLOVES, WELDER'S; TYPE HEAT RESISTANT, COLOR GREEN LINED, CUFF TYPE SHORT, MATERIAL LEATHER, COMMERCIAL SIZE 10.5 MM, LENGTH ONE SIZE FITS ALL; WELDMASTER; YELLOW EDGE ON REAR OF CUFF

No image GLOVES WELDER'S;HEAT RESISTANT,SHORT PAA

120

GLOVES, SURGEONS'; EQUIPMENT; APPROVED ITEM NAME GLOVES,RUBBER,AUTOPSY EQUIPMENT USED ON FOR USE WHEN SPRAYING WITH AND HANDLING EPOXY TAR. STORES DESCRIPTION SIZE 9 (AUTOPSY GLOVE) NATURAL RUBBER-SOLUTION-DIPPED WITH ROLLED WRIST AND SMOOTH FINISH

GLOVES,RUBBER,AUTOPSY PR



_________________________ ____________________________


121

GLOVES,RUBBER, CHEMICAL PROTECTIVE SPECIFICATION NUMBER SABS 416/LATEST TYPE 2, NATURAL RUBBER UNREINFORCED, CHEMICAL RESISTANT, WRIST LENGTH, WITH OVERALL LENGTH OF GLOVE270 MM MARKING: IN ADDITION TO CLAUSE 4.2.1 AND 4.2.2 OF SABS 416

GLOVE,RUBBER,CHEMICAL PROTECTIVE PR

122

GLOVES, UTILITY; TYPE SAFETY MALE, MATERIAL ACRYLIC 50, COTTON 50 PCT; P/N: SN826142M JAMES NORTH, P/N: UNKNOWN AFROX LTD GERMISTON; CLEAN GRIP OR EQUAL; POLYVINYL CHLORIDE DOTTED COATING NO SEAMS; CLOSELY KNITTED SHELL REVERSIBLE AND LAUNDERABLE

GLOVES UTLTY;SAFETY MALE PR


Unit of Measure



123

GLOVES, UTILITY; TYPE SAFETY, SIZE SMALL, MATERIAL GOAT SKIN, GENDER UNISEX, FEATURES THERMAL WINTER

GLOVES UTLTY;SAFETY,SZ S,GOAT SKIN PR

124 GLOVES UTLTY;SAFETY,SZ M,GOAT SKIN PR

125

GLOVES UTLTY;SAFETY,SZ L,GOAT SKIN PR

126

GLOVES UTLTY;SAFETY,SZ XL,GOAT SKIN PR

127

GLOVES, UTILITY; TYPE SAFETY, SIZE SMALL, MATERIAL GOAT SKIN, GENDER UNISEX, FEATURES THERMAL SUMMER

GLOVES UTLTY;SAFETY,SZ S,GOAT SKIN PR

128

GLOVES UTLTY;SAFETY,SZ M,GOAT SKIN PR

129

GLOVES UTLTY;SAFETY,SZ L,GOAT SKIN PR

130

GLOVES UTLTY;SAFETY,SZ XL,GOAT SKIN PR



_________________________ ____________________________


131

GLOVES, UTILITY; TYPE SAFETY, MATERIAL PIGSKIN, GENDER UNISEX

GLOVES UTLTY;SAFETY,SZ S,PIGSKIN, UNISEX

PR

132

GLOVES UTLTY;SAFETY,SZ M,PIGSKIN, UNISEX

PR

133

GLOVES UTLTY;SAFETY,SZ L,PIGSKIN, UNISEX

PR

134

GLOVES UTLTY;SAFETY,SZ XL,PIGSKIN, UNISEX

PR

135

GLOVES, UTILITY; TYPE SAFETY, SIZE SMALL, MATERIAL CHROME LEATHER, COLOR LIGHT GRAY, GENDER UNISEX, FEATURES REINFORCED DOUBLE PALM AND COTTON BACK

No image

GLOVES UTLTY;SAFETY,SZ S,CHROME LEATHER

PR

136

GLOVES UTLTY;SAFETY,SZ M,CHROME LEATHER

PR

137

GLOVES UTLTY;SAFETY,SZ L,CHROME LEATHER

PR

138

GLOVES UTLTY;SAFETY,SZ XL,CHROME LEATHER

PR

139 GLOVES UTILITY;SAFETY,ONE SIZE FITS ALL PAA

Item Description

Unit of Measure



140 GLOVES UTLTY;SAFETY,SZ S,POLYMIDE PR

141 GLOVES UTLTY;SAFETY,SZ M,POLYMIDE PR

142 GLOVES UTLTY;SAFETY,SZ L,POLYMIDE PR

143

GLOVES, UTILITY; TYPE SAFETY, MATERIAL NITRILE, COLOR YELLOW, GENDER UNISEX, FEATURES 200 CUFF MM

GLOVES UTLTY;SAFETY,SZ S,NITRILE, YELLOW

PR

144

GLOVES UTLTY;SAFETY,SZ M,NITRILE, YELLOW

PR

145

GLOVES UTLTY;SAFETY,SZ L,NITRILE,

YELLOW PR

146

GLOVES UTLTY;SAFETY,SZ XL,NITRILE, YELLOW

PR



_________________________ ____________________________


147

GLOVES,UTILITY; TYPE SAFETY, MATERIAL NITRILE, COLOUR YELLOW, GENDER UNISEX, FEATURES 200 CUFF MM

No image

GLOVES UTLTY;SAFETY,NITRILE,YELLOW PAA

148

GLOVES, UTILITY; TYPE SAFETY, MATERIAL POLYVINYL CHLORIDE, COLOR GREEN, GENDER UNISEX, FEATURES 200 CUFF MM

GLOVES UTLTY;SAFETY,SZ S,PVC,GREEN PR

149 GLOVES UTLTY;SAFETY,SZ M,PVC,GREEN PR

150 GLOVES UTLTY;SAFETY,SZ L,PVC,GREEN PR

151 GLOVES UTLTY;SAFETY,SZ XL,PVC,GREEN PR

152

MITTENS, HEAT PROTECTIVE; TYPE REVERSABLE, MATERIAL CHROME LEATHER, FEATURES REINFORCED UNLINED

MITTENS HEAT PRTCTV;REVERSABLE,40 CM PR

153 MITTENS HEAT PRTCTV;REVERSABLE,60 CM PR

154 MITTENS HEAT PRTCTV;REVERSABLE,30 CM PR


Unit of Measure



155 GLOVE SET, CHEMICAL PROTECTIVE; TYPE, SIZE ONE SIZE FITS ALL, MATERIAL POLYVINYL CHLORIDE; STANDARD: SABS 416/LATEST. TYPE1, FABRIC-REINFORCED, KNITTED CUFF, 35MM OF CUFF TO REMAIN UNCOATED. MARKING IN

ADDITION TO CLAUSE 4.2.1 & 4.2.2 OF SABS 416

GLOVE SET CHMCL PRTCTV;WRIST LENGTH,

PVC PR

156

GLOVE SET CHMCL PRTCTV;ELBOW LENGTH, PVC

PR

157 GLOVE SET CHMCL PRTCTV;SHOULDER LG, PVC

PR



_________________________ ____________________________


158

MITTENS, HEAT PROTECTIVE; TYPE HAND GUARD(PAD), MATERIAL CHROME LEATHER, FEATURES REINFORCED STAPLED

MITTENS HEAT PRTCTV;HAND GUARD(PAD), 30CM

EA

159


EA

160


EA

161

GLOVES, WELDERS'; TYPE HEAT RESISTANT, SIZE 400 MM, MATERIAL CHROME LEATHER, COLOR RED; STARNDARD: EN 407 LATEST, PARTLY LINED, WITHSTANDING TEMPERATURES OF 200 DEGREE C, TO EN 407 LATEST

GLOVES WLDRS;HEAT RESISTANT,400 MM, RED

PR



_________________________ ____________________________



Unit of Measure



162

GLOVES, WELDER'S; TYPE SAFETY, COLOR PINK/RED, CUFF TYPE LONG, MATERIAL CHROME LEATHER, LENGTH 8 IN; PINK FIRE / HEAT RETARDANT CHROME SPLIT LEATHER, SUBSTANCE 1.3 – 1.6MM; WOVEN BLANKET MATERIAL LINING Nº 25 POLYFIL CORE SPUN THREAD THE GLOVE CONSISTS OF CHROME SPLIT LEATHER A FULL APRON PALM AND THUMB RE-ENFORCE IS STITCHED INTO THE SEAMS OF THE HAND PORTION OVERALL LENGTH 40CM FROM TIP OF MIDDLE FINGER TO SEAM BETWEEN HAND PORTION AND CUFF 19.5CM ALONG SEAM BETWEEN HAND PORTION AND CUFF ACROSS NARROWEST PART OF CUFF 17CM ACROSS PALM AT CROTCH OF THUMB 15CM FROM TIP OF INDEX FINGER TO CROTCH BETWEEN THUMB AND INDEX FINGER 13.5CM; FROM TIP OF THUMB TO CROTCH OF THUMB 8CM ALL LEATHER AND THREAD

USED IN THE CONSTRUCTION OF THE GLOVE COMPLY WITH THE REQUIREMENTS OF THE SABS FOR INDUSTRIAL PROTECTIVE WEAR SANS 316 OF 2002 SHOULD EXCESSIVE HEAT BUILD UP TRANSPIRE, THE GLOVE COULD BE THROWN OFF WITH A JERKING MOTION; TYPE WELDING

No image GLOVES WELDER'S;SFTY,PINK/RED,LONG PAA

163

FACESHIELD, INDUSTRIAL; TYPE SOLID VISOR, PACKAGE TYPE PLASTIC BAG; SPECIFICATION NUMBER; SANS 1404 / LATEST; WITH A CLEAR POLYCARBONATE VISOR; WITH A WIDTH OF A

LEAST 350 MM AND LENGTH 250 MM X THICKNESS 3 MM

FACESHIELD INDL;SOLID VISOR,PLSTC BAG EA



_________________________ ____________________________


164

FACESHIELD, INDUSTRIAL; TYPE SOLID VISOR, PACKAGE TYPE PLASTIC BAG; SPECIFICATION NUMBER; SANS 1404 / LATEST; GREEN POLYCARBONET VISOR; WIDTH 350 MM X LENGTH 250 MM X THICKNESS 3 MM.

FACESHIELD INDL;SOLID VISOR,PLSTC BAG EA


Unit of Measure



165

GOGGLES, INDUSTRIAL; TYPE CHEMICAL RESISTANT, LENS MATERIAL ACETATE, LENS COLOR CLEAR, FEATURES ANTI-FOG, PACKAGE TYPE PLASTIC ENVELOPE; SPLASH IMPACK RESISTANT, INDIRECT VENT

GOGGLES INDL;CHEMICAL RESISTANT, ACETATE

PR

166

GOGGLES, INDUSTRIAL; TYPE DUST PROTECTION, LENS MATERIAL PLASTIC, LENS COLOR CLEAR,

FEATURES ANTI FOG; DUST, PACKAGE TYPE PLASTIC ENVELOPE; LOW PROFILE GOGGLE WITH FOAM INSERT AND INDIRECT VENTING; ESPECIALLY DESIGNED FOR AREAS WITH DUST; STRONG, COMFORTABLE HEADBAND;

GOGGLES INDL;DUST PROTECTION,PLSTC, CLEAR

PR

167

GOGGLES, INDUSTRIAL; APPROVED ITEM NAME GOGGLES, INDUSTRIAL SPECIFICATION NUMBER SABS 1404/LATEST STORES DESCRIPTION GOGGLES, WELDING, OVERALL THE FRAME TO BE OF A PLASTICS MATERIAL. VENTILATION OPENINGS TO BE TO CLAUSE 3.3.3.(C) OF SPEC. LENS HOLDERS TO BE OF THE INDEPENDENT SC

GOGGLES,INDUSTRIAL PR



_________________________ ____________________________


168

LENS, GOGGELS, INDUSTRIAL SPECIFICATION NUMBERSABS1404 PART 11/LATEST, INDUSTRIAL SHADED LENS FOR CHIPPING GOGGLE, 50MM DIA X 2.8MM THICK, SHADE NO 2 TOUGHENED GLASS.

LENS,GOGGLE,INDUSTRIAL EA


Unit of Measure



169

GOGGLES, INDUSTRIAL; TYPE BRAZING AND CUTTING, LENS MATERIAL POLYCARBONATE, LENS COLOR GREY, FEATURES ANTI FOG LENS AND UV PROTECTION, PACKAGE TYPE PLASTIC ENVELOPE; HORIZONTAL & VERTICAL ADJUSTABLE TEMPLES & INTERGRATED SIDE SHIELD. EXTENDED CHEEK & BROW PROTECTION. TO SUPPLY WITH LANYARD ITEM 3520366; (SANS 1404-1993)EN 166

GOGGLES INDL;BRAZING AND CUTTING, GREY

PR

170

SPECTACLE, SAFETY; SIDE ARMS HORIZONTAKLLY ADJUSTABLE, ADJUSTABLE TEMPLES WITH SOFT PAD, 100% POLYCARBONATE LENS IS UV380; ANTI SCRATCH AND ANTI FOG DIAMOND COATED LENSES; STANDARDS EN166 AND ANSI Z87.1

No image SPECTACLE SAFETY PAA

171

GOGGLES, INDUSTRIAL; TYPE BRAZING AND CUTTING, LENS MATERIAL POLYCARBONATE, LENS COLOR GREY, FEATURES ANTI FOG LENS AND UV PROTECTION, PACKAGE TYPE PLASTIC ENVELOPE; HORIZONTAL & VERTICAL ADJUSTABLE TEMPLES & INTERGRATED SIDE SHIELD. EXTENDED CHEEK & BROW PROTECTION. TO FIT OVER PRECRIPTION SPECTICALS. TO SUPPLY WITH LANYARD ITEM 35203600; (SANS 1404-1993)EN 166

GOGGLES INDL;BRAZING AND CUTTING,

GREY PR



_________________________ ____________________________


172

GOGGLES, INDUSTRIAL; TYPE BRAZING AND CUTTING, LENS MATERIAL POLYCARBONATE, LENS COLOR CLEAR, FEATURES ANTI FOG LENS AND UV PROTECTION, PACKAGE TYPE PLASTIC ENVELOPE; HORIZONTAL AND VERTICAL ADJUSTABLE TEMPLES AND INTERGRATED SIDE SHIELDS. EXTENDED CHEEK AND DROW PROTECTION. SUPPLIED WITH LANYARD ITEM 35203600; (SANS 1404-1993)EN 166

GOGGLES INDL;BRAZING AND CUTTING, CLEAR

PR


Unit of Measure



173

GOGGLES, INDUSTRIAL; TYPE BRAZING AND CUTTING, LENS MATERIAL POLYCARBONATE, LENS COLOR CLEAR, FEATURES ANTI FOG LENS AND UV PROTECTION, PACKAGE TYPE PLASTIC ENVELOPE; HORIZONTAL AND VERTICAL ADJUSTABLE TEMPLES AND INTERGRATED SIDE SHIELDS. EXTENDED

CHEEK AND DROW PROTECTION. SUPPLIED WITH LANYARD ITEM 35203600 TO BE WORN OVER OWN SPECTICALS; (SANS 1404-1993)EN 166

GOGGLES INDL;BRAZING AND CUTTING, CLEAR

PR

174

SPECTACLE, SAFETY; TYPE GRANGE, LENS COLOR CLEAR; OCULAR MATERIAL POLYCARBONATE, FRAME MATERIAL NYLON, IN CONFORMITY WITH THE STANDARDS EN166:2001, EN170:2002 AND EN172:2001

No image SPECTACLE SAFETY;GRANGE,CLEAR EA

175

SPECTACLE, SAFETY; TYPE SUPREME, LENS COLOR CLEAR; SIDE ARMS HORIZONTALLY ADJUSTABLE, ADJUSTABLE TEMPLES WITH SOFT PAD, 100% POLYCARBONATE LENS IS UV380, ANTI SCRATCH AND ANTI FOG DIAMOND COATED LENSES; STANDARDS EN166 AND ANSI Z87.1

No image SPECTACLE SAFETY;SUPREME,CLEAR PAA



_________________________ ____________________________


176 LANYARD; TYPE SPECTICAL, MATERIAL NYLON/POLYESTOR/NOEPRENE, LENGTH 600 MM, CONNECTION LOOP CORD

LANYARD;SPECTICAL,LG 600 MM,LOOP CORD EA

177

FLASHLIGHT; TYPE HEADLAMP, FEATURES CLIP ON, COLOR BLACK, BATTERY TYPE AND QUANTITY 2 LITHUIM COIN SELL, VOLTAGE RATING 3 V, LAMP TYPE LED; WITHSTAND EXTREME CONDITIONS, ULTRA BRIGHT WHITE LIGHT TO LAST +/- 48 HOURS. 5 LED BULPS WITH 10000 + HOURS BURN TIME EACH

FLASHLIGHT;HEADLAMP,CLIP ON,BLACK,3 V EA


Unit of Measure



178

HOOD, ABRASIVE CLEANING; TYPE SANDBLASTING, MATERIAL RUBBER/PLASTIC/BRASS/STEEL, COLOR BLUE/GREY; EQUIPMENT USED ON SANDBLASTING, GRITBLASTING TO CONSIST OF A FIBERGLASS SHELL WITH INTEGRATED AIR CHANNEL FOR FREE

AIR FLOW ACROSS TOP OF SHELL AND OVER WINDOW,FITTED WITH ADJUSTABLE NYLON HEADGEAR AND COVERED WITH A ONE-PIECE MOULDED RUBBER HOOD EXTENDING BELOW THE BELT,AND FITTED WITH A HINGED WINDOW CONSISTING OF A PEXIGLASS LENS AND A BRASS MESH COVERLENS,WITH EASILY REMOVABLE FASTENINGS, FOR EASY LENS REPLACEMENT AND/OR CLEANING. THE ADJUSTABLE AIR FLOW VALVE IS TO BE MOUNTED ON A LEATHER BELT AT LEAST 38 MM WIDE AND FITTED WITH A QUICK RELEASE AIR COUPLING

HOOD ABRSV CLNNG;SANDBLASTING, BLUE/GREY

EA



_________________________ ____________________________


179 HOOD; TYPE BEE VEIL, SIZE TO FIT OVER ANY STANDARD HELMET OR HAT, MATERIAL NETTING MATERIAL

HOOD;BEE VEIL,NETTING MATERIAL EA

180

HELMET, SAFETY; TYPE V- GARD PEAK, SIZE HEIGHT AND CIRCUMFERENCE ADJUSTABLE TO SIZE, COLOR WHITE, MATERIAL PLASTIC, FEATURES SNUGFIT SUSPENTION LINER; SPECIFICATION NUMBER; S.A.B.S. 1397 TYPE A

HELMET SFTY;V- GARD PEAK,WHITE,PLSTC EA


Unit of Measure



181

HELMET, SAFETY; TYPE V-GARD BRIM, SIZE HEIGHT AND CIRCUMFERENCE ADJUSTABLE TO SIZE, COLOR

WHITE, MATERIAL PLASTIC, FEATURES SNUGFIT SUSPENTION LINER; SPECIFICATION NUMBER S.A.N.S. 1397 TYPE A

HELMET SFTY;V-GARD BRIM,WHITE,PLSTC EA

182 PROTECTOR; TYPE SUN, MATERIAL FABRIC; LIME AND YELLOW IN COLOR; STANDARD SIZE; USED ON NIKKI HARD HATS

No image PROTECTOR;SUN,FABRIC,HARD HAT EA



_________________________ ____________________________


183

HELMET, SAFETY; TYPE NIKKI OR EQUIVALENT, SIZE 50-64 CM, COLOR WHITE, MATERIAL ABS PLASTIC LIGHTWEIGHT, PACKAGE TYPE PLASTIC BAG; SPECIFICATION: SANS 1397:2003; EN:1995., RIGIDTY AND PROTECTION. CONTOURED RAIN CHANNEL.HIGH DIELECTRIC STRENGHT / ELECTRICAL INSULATION. ONE HANDED RATCHET ADJUSTABLE SHOCK ABSORBING SUSPENTION. 4 POINT LIGHTWEIGHT LINING WITH SOFT ABSORBANT CROWN AND SWEATBAND. ADVANCED PERMASWEAT BREATHABLESWEATBAND. EASILY REPLACEABLE AND WASHABLE. SLOTS FOR EARMUFFS AND VISORS. ULTRA-VIOLET INHIBITOR PROTECTING THE LIFE OF THE HELMET. REINFORCED FOR EXTRASHELL STRENGHT; HEIGHT AND CIRCUMFERENCE ADJUSTABLE; SANS 1397:2003 AND EN 397:1995

HELMET SFTY;NIKKI OR EQUIVALENT,50-64 CM,WHITE

EA

184

HELMET, SAFETY; TYPE HARD HAT, COMMERCIAL SIZE ONE SIZE FITS ALL, COLOR BLUE, MATERIAL PLASTIC; HARD HAT DESIGN: NIKKI OR EQUIVALENT: WITH CHIN STRAPS

No image HELMET SAFETY;HARD HAT,ONE SIZE FITS ALL EA

185 HELMET, SAFETY; TYPE NIKKI OR EQUIVALENT, COMMERCIAL SIZE STANDARD, COLOR ORANGE, MATERIAL PLASTIC; WITH CHIN STRAPS

No image HELMET SAFETY;NIKKI OR EQUIVALENT, STD,ORANGE, PLASTIC

EA




186

HELMET, WELDER'S; TYPE AUTO DARK, MATERIAL THERMOPLASTIC, COLOR BLACK, SIZE ONS SIZE FITS ALL, FEATURES LOCKING RATCHET ADJUSTMENT FOR HEADGEAR; FIXED FRONT.HEIGHT ADJUSTMENT ON CROWN FOR INDIVIDUAL FIT & COMFORT. ADJUSTING SIDE TILT NUTS ALLOW FOR MULTIPLE ADJUSTMENT PRESSURE

HELMET WLDRS;AUTO DARK, THERMOPLASTIC EA



_________________________ ____________________________


187

HELMET, SAFETY; TYPE HARD HAT, SIZE ONE SIZE FITS ALL, COLOR ORANGE, MATERIAL HIGH DENSITY POLYETHYLENE, FEATURES COMPLETE WITH VISOR AND EARMUFF BRACKET, PACKAGE TYPE BOX; SUPPLY WITH FLEXABLE PLASTIC METERIAL ARM, SYNTHETIC FOAM EAR PROTECTION MUFFS AND ALUMINIUM GAUSE VISOR FOR HORTICULTURE USE; HEIGHT AND CIRCUMFERENCE ADJUSTABLE TO SIZE

HELMET SFTY;HARD HAT,ONE SIZE FITS ALL EA

188

STRAP, CHIN, HELMET, 4 POINT WEBBING CHINSTAP NIK/04C, VELCRO FASTNING, RED OR ORANGE, CHINCUP OPSIONAL EXTRA

STRAP,CHIN,HELMET EA

189

STRAP, CHIN; TYPE ELASTICISED, MATERIAL NYLON, DIMENSIONS WD 1.9 X LG 40 CM, SPECIAL FEATURES TWO PLASTIC/POLYTHENE LOCATING HOOKS; STANDARD: SABS142 TYPE EB 18,

ADJUSTABLE WITH NON SLIP BUCKLE & TWO PLASTI/POLYTHENE LOCATING HOOKS, ONE STITCHED TO ONE END AND OTHER HOOK IN. SABS 142 TYPE EB 18

STRAP CHIN;ELASTICISED,NYLN EA


Unit of Measure



190

MASK, AIR FILTERING; TYPE DISPOSABLE WITH VALVE, MEDIA FOR WHICH DESIGNED DUST, FASTENING METHOD TWO ELASTIC HEAD BANDS, MASK MATERIAL POLYURETHAINE FOAM, SIZE ONE SIZE FIT ALL, FILTER MATERIAL POLYURETHAINE

FOAM, PACKAGE TYPE BOX OF 15; SPECIFICATION EN 149 / LATEST FFP2S; FOLDABLE

MASK AIR FILTRNG; DISPOSABLE WITH VALVE

EA



_________________________ ____________________________


191

RESPIRATOR, AIR FILTERING; TYPE WELDING, MEDIA FOR WHICH DESIGNED WELDING FUMES, FILTER MATERIAL POLYISOPRENE/COTTON FIBRE, DIMENSIONS ONE SIZE FITS ALL; SPECIFICATION: EN 149:2001, STANDARD: FFP 2, CATALOGUE: DISPOSIBLE, HALF MASK WITH FACE SEAL GASKET. ALUMINIUM NOSE CLIP

RESPIRATOR AIR FILTR;WELDING EA

192

RESPIRATOR, AIR FILTERING; TYPE WELDING, MEDIA FOR WHICH DESIGNED RESPIRATORY PROTECTION, FILTER MATERIAL POLYPROPYLENE, DIMENSIONS ONE SIZE FITS ALL; FFP3, FOR USE ALSO WITH ASBESTOS AND LEAD.

No image RESPIRATOR AIR FILTERING;WELD,PP EA

193

MASK, RESPIRATOR; TYPE FULL FACE, DESIGN TYPE AIR/DUST FILTERING, SIZE ONS SIZE FITS ALL, MASK MATERIAL THERMOPLASTIC RUBBER, TUBE MATERIAL SILICON

MASK RESPRTR;FULL FACE,SILICON EA

194

CARTRIDGE, RESPIRATOR, AIR FILTERING; TYPE FULL MASK, MEDIA FOR WHICH DESIGNED ORGANIC VAPOUR, DESIGN ROUND, COLOUR CODE ORANGE/WHITE; STANDARD: EN 141 CLASS A2, FILTER TYPE 3 AND OF ACTIVATED CARBON GAS FILTER, WEIGHT 300GRAM, FLOW RESISTANCE<2.2M/BAR@301/MIIN,PEPERSRAY INCLUDED; FILTER COMBINATION A2P3

CARTRIDGE RESPRTR AIR FILTRNG;FULL MASK

EA



_________________________ ____________________________




195

MASK, AIR FILTERING; TYPE DISPOSABLE, MEDIA FOR WHICH DESIGNED ELECTROSTATICALLY CHARGED FILTER, FASTENING METHOD TWO ELASTIC HEAD BANDS, MASK MATERIAL FILTERING FIBRE, SIZE ONE SIZE FIT ALL, FILTER MATERIAL PARTICULATES, PACKAGE TYPE BOX OF 20; ( FF 2 );

FOR PROTECTION AGAINST SILICA AND ASBESTOS DUST. THE WIDTH OF THE HARNESS STRAPS TO BE AT LEAST 8 MM. TO QUOTED PART NUMBER OR EQUAL

MASK AIR FILTRNG; DISPOSABLE EA

196

MASK, AIR FILTERING; TYPE DISPOSABLE, MEDIA FOR WHICH DESIGNED DUST, COMMERCIAL SIZE ONE SIZE FIT ALL, SPECIAL FEATURES HALF MASK WITH VALVE; FFP2; BOX OF 10

No image MASK AIR FILTERING;DISPOSABLE,DUST EA

197

PADS, KNEE, INDUSTRIAL; TYPE PROTECTOR, DESIGN TYPE 1 PIECE, DIMENSIONS LG 230 X WHT 250 MM, MATERIAL POLYVINYL CHLORIDE, COLOR ORANGE, ATTACHMENT METHOD ADJUSTABLE ELASTIGATED STRAP, SPECIAL FEATURES LEFT/RIGHT; KNEE, PRE-FORMED PLASTIC, SWIWEL TYPE, OVERALL LENGTH 230 MM. CURVED WIDTH 250 MM BOTTOM PARTS COMPLETE WITH RUBBER FOAM INSER. ATTACHED TO LEG

PADS KNEE INDL;PROTECTOR,1 PIECE,PVC PR

198

PADS, KNEE, INDUSTRIAL; TYPE HEAVY DUTY, DIMENSIONS WD 135 X LG 155 MM, MATERIAL POLYVINYL CHLORIDE AND EVA RUBBER, COLOR BLACK, ATTACHMENT METHOD ADJUSTABLE ELASTICATED STRAP, SPECIAL FEATURES MOULDED

PADS KNEE INDL;HVY DTY,BLACK,MOULDED PR



_________________________ ____________________________



Unit of Measure



199 COVERALLS, WADERS'; STYLE BIB AND BRACE,

COLOR HIGH VISIBILITY YELLOW, BOOT MATERIAL POLYVINYL CHLORIDE, GARMENT MATERIAL POLYVINYL CHLORIDE 79PCT/POLYESTER BASE CLOTH 21PCT, CLOTH WEIGHT 400 G/M2, GENDER UNISEX, DESIGN TYPE WEBBING BRACES 38 MM, HIGH FREQUENCY WELDED SEAMS AND RE-ENFORCED INLEG, BOOTS STITCHED AND HIGH FREQUENCY WELDED, 38 MM QUICK RELEASE BUCKLES ATTACHED TO WEBBING.

COVERALLS WADRS;BIB AND BRACE,5,PVC EA

200 COVERALLS WADRS;BIB AND BRACE,6,PVC EA







207 VEST, HIGH VISIBILITY; TYPE REFLECTIVE, STYLE

WAIST COAT (EN4, CLASS 2), GARMENT, COLOR YELLOW, MATERIAL POLYESTER, FEATURES TRANSNET LOGO, CLOSURE TYPE FASTENER,SLIDE, PACKAGE TYPE PLASTIC ENVELOPE; SPECIFICATION: EN471 & SANS 50471, DRAWING NO: UNKNOWN, 50 MM REFLECTIVE STRIPS; AROUND WAIST AND OVER BOTH SHOULDERS; INDUSTRIAL; 60 WASHES AT 60 DEGREES; TRANSPARENT ID POUCH; AIRTEX SOLID 125 G

VEST HI VISB;REFLCTV,S,YELLOW,POLYSTR EA

208 VEST HI VISB;REFLCTV,M,YELLOW,POLYSTR EA

209 VEST HI VISB;REFLCTV,L,YELLOW,POLYSTR EA

210

VEST HI VISB;REFLCTV,XL,YELLOW,POLYSTR

EA

211

VEST HI VISB;REFLCTV,2XL,YELLOW, POLYSTR

EA

212


EA

213

VESTHI VISB;REFLCTV,4XL,YELLOW, POLYSTR

214


EA

215


EA

216 VEST HI VISB;REFLCTV,7XL,YELLOW, EA



_________________________ ____________________________


POLYSTR

217


EA

218 BIB, REFLECTIVE; GARMENT SIZE STANDARD, COLOR LIME, MATERIAL 300 DENURE POLYURETHANE COATED NON-BREATHABLE,

GARMENT CLOSING METHOD STRAP; WALKIE TALKIE POUCH, MOTOROLO CP160, SIZE: WD 275 MM X HT 370 MM, POUCH SIZE: WD 55 MM BOTTON X WD 60 MM TOP X LG 130 MM X DP 45 MM, ADJUSTABLE STRAPS WD 50 MM WITH QUICK RELEASE PLASTIC CLASPS, MATERIAL TO EN471 AND SANS 50471 CLASS 3, 50 M LIME AND SILVER REFLECTIVE TAPE TO EN 471 AND SANS 50471 CLASS 2, TRANSPARENT ID POUCH, TRANSNET LOGO, PACKED IN PLASTIC ENVELOPE

BIB REFLCTV;STANDARD,LIME,STRAP,MOTO RH

EA

219 BIB REFLCTV;STANDARD,LIME,STRAP,MOTO

LH EA

220 BIB REFLCTV;STANDARD,LIME,STRAP,TAIT RH

EA

221 BIB REFLCTV;STANDARD,LIME,STRAP,TAIT LH

EA

222 BIB REFLCTV;STANDARD,LIME,STRAP,ICON RH

EA

223 BIB REFLCTV;STANDARD,LIME,STRAP,ICON LH

EA

224

VEST, HIGH VISIBILITY; TYPE REFLECTIVE, STYLE FISH NET, COLOR LIME, MATERIAL POLYESTER, SPECIAL FEATURES VENTILATED, CLOSURE TYPE YKK ZIP; 50MM REFLECTOR TAPE AROUND WAIST AND OVER BOTH SHOULDERS ; WASHABLE, WITH ID POUCH; MESH FRONT AND BACK

No image

VEST HIGH VISIBILITY;REFLCTV,LIME,SIZE 3XL

EA

225 VEST HIGH VISIBILITY;REFLCTV,LIME,SIZE 2XL

EA

226 VEST HIGH VISIBILITY;REFLCTV,LIME, SIZE L EA

227 VEST HIGH VISIBILITY;REFLCTV,LIME, SIZE M

EA

228 VEST HIGH VISIBILITY;REFLCTV,LIME, SIZE XL

EA

229 VEST, HIGH VISIBILITY; TYPE REFLECTIVE, STYLE WAIST COAT (EN4, CLASS 2), GARMENT SIZE SMALL, COLOR YELLOW, MATERIAL POLYESTER, FEATURES TRANSNET FREIGHT RAIL LOGO, CLOSURE TYPE FASTENER, SLIDE, PACKAGE TYPE PLASTIC ENVELOPE; SPECIFICATION: EN 471 & SANS50471 UNKNOWN, 50 MM REFLECTIVE STRIPS; AROUND WAIST AND OVER BOTH SHOULDERS; INDUSTRIAL; 60 WASHES AT 60 DEGREES; TRANSPARENT ID POUCH; TWO PATCH POCKETS WITH MITRE FLAPS

VEST HI VISB;REFLCTV,S,YELLOW,POLYSTR EA

230 VEST HI VISB;REFLCTV,M,YELLOW,POLYSTR EA

231 VEST HI VISB;REFLCTV,L,YELLOW,POLYSTR EA

232 VEST HI VISB;REFLCTV,XL,YELLOW,POLYSTR EA

233 VEST HI VISB;REFLCTV,2XL,YELLOW, POLYSTR

EA

234 VEST HI VISB;REFLCTV,4XL,YELLOW, EA



_________________________ ____________________________


BELOW VERTICAL REFLECTIVE TAPE ON FRONT OF VEST; AIRTEX SOLID 125 G

POLYSTR


EA


EA




237

VEST, HIGH VISIBILITY; TYPE REFLECTIVE, STYLE WAIST COAT (EN4, CLASS 2), GARMENT SIZE SMALL, COLOR YELLOW, MATERIAL POLYESTER, FEATURES TRANSNET FREIGHT RAIL LOGO, CLOSURE TYPE FASTENER, SLIDE, PACKAGE TYPE PLASTIC ENVELOPE; SPECIFICATION: EN 471 & SANS50471 UNKNOWN, 50 MM REFLECTIVE STRIPS; AROUND WAIST AND OVER BOTH SHOULDERS; INDUSTRIAL; 60 WASHES AT 60 DEGREES; TRANSPARENT ID POUCH; TWO PATCH POCKETS WITH MITRE FLAPS BELOW VERTICAL REFLECTIVE TAPE ON FRONT OF VEST; AIRTEX SOLID 125 G

VEST HI VISB;REFLCTV,7 EXTRA-LARGE EA

238 VEST HI VISB;REFLCTV,8 EXTRA-LARGE EA

239

PAD; TYPE SHOULDER, DIMENSIONS THK 25 MM, MATERIAL CLOSE CELL FOAM, APPLICATION PROTECTION; 3 POINT ADJUSTMENT, CONDORA OUTER SHELL, SOFT INNER LINER, INTERCHANGEABLE ON SHOULDERS; PROTECTION

PAD;SHOULDER,THK 25 MM,CLOSE CELL FOAM

EA

240 BELT, SAFETY, INDUSTRIAL; TYPE KIDNEY, DIMENSIONS, BELT MATERIAL ELASTIC, FINISH BLACK,

SPECIAL FEATURES VELCRO FASTNING, PACKAGE TYPE BAG PLASTIC; SIZE SMALL ADJUSTABLE

BELT SFTY INDL;KIDNEY,BELT MTRL ELASTIC,S

EA

241 BELT SFTY INDL;KIDNEY,BELT MTRL ELASTIC,M

EA

242 BELT SFTY INDL;KIDNEY,BELT MTRL ELASTIC,L

EA

243 BELT SFTY INDL;KIDNEY,BELT MTRL ELASTIC,XL

EA



_________________________ ____________________________


244

BELT SFTY INDL;KIDNEY,BELT MTRL ELASTIC,2XL

EA


Unit of Measure



245 TROUSERS, UTILITY; TYPE ACID RESISTANT,

GENDER UNISEX, COLOR WHITE, CLOTH NAME COTTON DRILL, CLOSING METHOD BUTTON, POCKET TYPE TWO SLANTING SIDE/ONE HIP, TROUSERS POCKET QUANTITY 3, FEATURES WITH REFELECTIVE STRIPS, SPECIFICATION SABS 434, PACKAGE TYPE PLASTIC BAG

TROUSERS UTLTY;ACID RESIST,UNISEX,77 CM

PR

246


PR

247


PR

248

TROUSERS UTLTY;ACID RESIST,UNISEX,92 CM PR

249


250


251


PR

252


253


254


PR

255


PR



_________________________ ____________________________


256


257


PR

258


PR

259


PR

260


PR


Unit of Measure



262

JACKET, UTILITY; TYPE ACID RESISTANT, GENDER UNISEX, COLOR WHITE, JACKET MATERIAL COTTON DRILL, FEATURES WITH REFLECTIVE STRIPS, PACKAGE TYPE PLASTRIC BAG; TRANSNET LOGO ON FRONT POCKET AND BACK OF JACKET

JACKET UTLTY;ACID RESIST,UNISEX,77 CM EA

263 JACKET UTLTY;ACID RESIST,UNISEX,82 CM EA








271




_________________________ ____________________________


272


273


274


275


276


277

JACKET UTLTY;ACID RESIST,UNISEX,152 CM

EA

278

JACKET, WET WEATHER; TYPE 2 PIECE WET SUIT, MATERIAL NYLON, GARMENT STYLE UNISEX, GARMENT SIZE SMALL, COLOR NAVY, FEATURES 50 MM REFLECTIVE STRIPS ON BACK/CHEST AND ARMS; TRANSNET LOGO ON BACK AND FRONT, PACKAGE TYPE PLASTIC ENVELOPE; REFERENCE NO: 35205319 , PACK AWAY ADJUSTABLE HOOD, ADJUSTABLE CUFFS, SLIDE FASTENER AND STORM FLAP, WELDED SEAMS

JACKET WET WTHR;2 PIECE WET SUIT,NYLN,

S

EA

279

JACKET WET WTHR;2 PIECE WET SUIT,NYLN, M

EA

280

JACKET WET WTHR;2 PIECE WET SUIT,NYLN, L

EA

281

JACKET WET WTHR;2 PIECE WET SUIT,NYLN, XL

EA

282

JACKET WET WTHR;2 PIECE WET SUIT,NYLN, 2XL

EA



_________________________ ____________________________


283


EA

284


EA

285


EA

286

JACKET WET WTHR;2 PIECE WET SUIT,NYLN,

SPCL EA


Unit of Measure



287

TROUSERS, WET WEATHER; TYPE 2 PIECE WET SUIT, GARMENT STYLE UNISEX, GARMENT SIZE SMALL, MATERIAL NYLON, COLOR NAVY, FEATURES WITH REFLECTIVE STRIPS AROUND LEGS, PACKAGE TYPE PLASTIC ENVELOPE; ELASTICATED WAIST AND DRAW CORD, ADJUSTABLE BOOT ENTRY, WELDED SEAMS

TROUSERS WET WTHR;2 PIECE WET SUIT,S

PR

288

TROUSERS WET WTHR;2 PIECE WET SUIT,M PR

289

TROUSERS WET WTHR;2 PIECE WET SUIT,L PR

290

TROUSERS WET WTHR;2 PIECE WET SUIT, XL PR

291

TROUSERS WET WTHR;2 PIECE WET SUIT, 2XL

PR

292


PR

293


PR

294


PR



_________________________ ____________________________


294


PR

295

TROUSERS WET WTHR;2 PIECE WET SUIT, SPCL

PR

296

SUIT, WET WEATHER; GARMENT, DESIGN TYPE TWO PIECE, COLOR NAVY, MATERIAL OXFORD NYLON 200G, GENDER UNISEX, CLOSURE METHOD DOUBLE OPEN END SLIDE FASTENER WITH DOUBLE STORM FLAP & PRESS STUDS, FEATURES TRANSNET LOGO

ON LEFT BREAST POCKET, CUFF TYPE ADJUSTABLE VELCRO, LEG BOTTOM TYPE ADJUSTABLE VELCRO, SPECIFICATION SANS 50471 AND EN 471, PACKAGE TYPE PVC DRAW STRING BAG; REFERENCE NO: 35205534 , THERMAL, WATERPROOF, 190G WADDING QUILTED LINING, SEALED SEAMS, JACKET WITH REMOVABLE HOOD WITH AJUSTABLE REFLECTIVE STRIP AND DRAW CORD. 2 HIP & 1 BREAST POCKETS WITH VELCRO CLOSING. STANDARD VISIBLE / REFLECTIVE TAPE ON JACKET AND TROUSERS. TROUSERS ELASTICSIZED WAIST

WITH DRAW CORD

SUIT WET WTHR;SMALL 87-92,2 PIECE,NAVY EA

297 SUIT WET WTHR;M (97-102),2 PIECE,NAVY EA

298 SUIT WET WTHR;L (107-112),2 PIECE,NAVY EA

299 SUIT WET WTHR;XL (117-122),2 PIECE,NAVY EA

300 SUIT WET WTHR;2 XL (127-132),2 PIECE EA







_________________________ ____________________________





305

SUIT, RAINWEAR; GARMENT SIZE 97 CM, DESIGN TYPE 2 PIECE, COLOR ORANGE DAYGLO, MATERIAL

TAFFETA RUBBERIZED NYLON 100% 210 G, GENDER UNISEX, CLOSURE METHOD SLIDE FASTENER NYLON (ZIP) 30 G, CUFF TYPE RAGLAN SLEEVE ELASTICATED; JACKET; HOOD WITH DRAW STRING, STORM FLAP UNDER ZIP, 2 SIDE POCKETS WITH FLAP, 50MM SILVER REFLECTIVE AROUND BOTH ARMS AT ELBOW HEIGHT AND AROUND THE BODY AT THE SAME HEIGHT, DRAW CORD AT THE WAIST OF JACKET. TROUSER; ELASTICATED WAIST COMPLETE WITH SIDE SLITS TO ACCESS UNDERGARMENT POCKETS, DOUBLE STITCHED IN-

SEAM AND CROTCH, 50MM SILVER REFLECTIVE AROUND THE KNEES. ALL SEAMS MUST BE PVC TAPED FOR WATER RESISTANCE

No image

SUIT RAINWEAR;97 CM,2 PIECE,UNISEX EA

306 SUIT RAINWEAR;112 CM,2 PIECE,UNISEX EA

307 SUIT RAINWEAR;122 CM,2 PIECE,UNISEX SUIT RAINWEAR;132 CM,2 PIECE,UNISEX SUIT RAINWEAR;142 CM,2 PIECE,UNISEX

SUIT RAINWEAR;152 CM,2 PIECE,UNISE

EA

308 EA

309 EA

310 EA



_________________________ ____________________________


311

SUIT RAINWEAR;162 CM,2 PIECE,UNISEX EA

312

SUIT, RAINWEAR; GARMENT SIZE 152 CM, DESIGN TYPE 2 PIECE, COLOR ORANGE, MATERIAL NYLON, GENDER UNISEX; RUBBERIZED; 50MM LIME SILVER REFLECTOR TAPE SEWN ON EACH OF THE JACKETS SLEEVES AND BOTH LEGS OF THE PANTS AS WELL

AS ACROSS THE BACK AND FRONT OF THE JACKET; REFLECTIVE RUBBERIZED BAG INCLUDED

No image SUIT RAINWEAR;152 CM,2 PIECE,ORANGE,UNISEX

EA


Unit of Measure



313

HARNESS, SAFETY, INDUSTRIAL; TYPE FULL BODY, DESIGN TYPE TRANSNET MPH5 ROPE ACCESS

HARNESS, HARNESS MATERIAL WEBBING, SPECIAL FEATURES FLAME RETARDEND, ANTI STATIC, 22 KILO NEWTON COATED D-RINGS, PACKAGE TYPE EQUIPMENT BAG WITH SLIDE FASTNER; SPECIFICATION: EN 50354, 50355 & 362, SANS 50354, 50355 & 30361, , SANS 50358 & 50813, FRONT; 45MM YELLOW DOUBLE SIDED REFLECTIVE WEBBING, C/W PADDING ONSHOULDERS, WEBBING IS BAR TACKED ATTACHMENTS; STERNAL, VENTRAIL,LATERAL, COATED D-RING. PADDED LEGS & COATED BUCKLES (NYLON). BACK; ATTACHMENT DORSAL COATED D-RING PLUS PADDED SUPPORT. COATED BUCKLES FOR DORSAL ADJUSTMENT. D-RING ON BACK FOR SELF RESCUE EQUIPMENT. PADDED KIDNEY SUPPORT C/W GREEN REFLECTIVE WEBBING. STANDING STEP; GREEN REFLECTIVE WEBBING. PADDED LEG STRAPS. STRAP BETWEEN

HARNESS SFTY INDL;FULL BODY,S EA

314 HARNESS SFTY INDL;FULL BODY,M EA

315 HARNESS SFTY INDL;FULL BODY,L EA

316 HARNESS SFTY INDL;FULL BODY,XL EA

317 HARNESS SFTY INDL;FULL BODY,2XL EA



_________________________ ____________________________


318

HARNESS AND LANYARD; 45MM YELLOW DOUBLE SIDED REFECTIVE WEBBING, D-RING TO ATTACHED LANYARD; WAIST 60-101MM, WEIGHT 50-70KG, LENGTH 1.5-1.8M

HARNESS SFTY INDL;FULL BODY,3XL EA

319

HARNESS, SAFETY INDUSTRIAL; TYPE STANDARD FULL BODY, MATERIAL CANVAS WEBBING; ULTIMATE CROSS OVER PLUS SPIDER WEBB CROSS OVER PLUS FULL BODY, COLOUR, BLUE, HARNESS COMPLETE WITH ADJUSTABLE PADDED LEGS WITH QUICK RELEASE BUCKLES, PADDED WAIST BELT COMPLETE WITH SIDE D-RINGS ADJUSTABLE SHOULDER STRAPS WITH RESCUE D-RINGS AND FLOATING BUCKLES, X - VEST PADDING, INDIVIDUAL SERIAL NUMBERING, TRACEABILITY ON ALL COMPONENTS, SPECIFICATIONS: EN 361: SANS 50361

No image HARNESS SAFETY IND;STD FULL BODY EA


Unit of Measure



313

HARNESS, SAFETY, INDUSTRIAL; TYPE FULL BODY, DESIGN TYPE TRANSNET MPH5 ROPE ACCESS HARNESS, HARNESS MATERIAL WEBBING, SPECIAL FEATURES FLAME RETARDEND, ANTI STATIC, 22 KILO NEWTON COATED D-RINGS, PACKAGE TYPE EQUIPMENT BAG WITH SLIDE FASTNER; SPECIFICATION: EN 50354, 50355 & 362, SANS 50354, 50355 & 30361, , SANS 50358 & 50813, FRONT; 45MM YELLOW DOUBLE SIDED REFLECTIVE WEBBING, C/W PADDING ONSHOULDERS, WEBBING IS BAR TACKED ATTACHMENTS; STERNAL, VENTRAIL,LATERAL, COATED D-RING. PADDED LEGS & COATED BUCKLES (NYLON). BACK; ATTACHMENT DORSAL COATED D-RING PLUS PADDED SUPPORT. COATED BUCKLES FOR DORSAL ADJUSTMENT. D-

HARNESS SFTY INDL;FULL BODY,S EA

314 HARNESS SFTY INDL;FULL BODY,M EA

315 HARNESS SFTY INDL;FULL BODY,L EA

316 HARNESS SFTY INDL;FULL BODY,XL EA



_________________________ ____________________________


317

RING ON BACK FOR SELF RESCUE EQUIPMENT. PADDED KIDNEY SUPPORT C/W GREEN REFLECTIVE WEBBING. STANDING STEP; GREEN REFLECTIVE WEBBING. PADDED LEG STRAPS. STRAP BETWEEN HARNESS AND LANYARD; 45MM YELLOW DOUBLE SIDED REFECTIVE WEBBING, D-RING TO ATTACHED LANYARD; WAIST 60-101MM, WEIGHT 50-70KG, LENGTH 1.5-1.8M

HARNESS SFTY INDL;FULL BODY,2XL EA

318 HARNESS SFTY INDL;FULL BODY,3XL EA

319

HARNESS, SAFETY INDUSTRIAL; TYPE STANDARD FULL BODY, MATERIAL CANVAS WEBBING; ULTIMATE CROSS OVER PLUS SPIDER WEBB CROSS OVER PLUS FULL BODY, COLOUR, BLUE, HARNESS COMPLETE WITH ADJUSTABLE PADDED LEGS WITH QUICK RELEASE BUCKLES, PADDED WAIST BELT COMPLETE WITH SIDE D-RINGS ADJUSTABLE SHOULDER STRAPS WITH RESCUE D-RINGS AND FLOATING BUCKLES, X - VEST PADDING, INDIVIDUAL SERIAL NUMBERING, TRACEABILITY ON ALL COMPONENTS, SPECIFICATIONS: EN 361: SANS 50361

No image HARNESS SAFETY IND;STD FULL BODY EA


Unit of Measure



320

LANYARD, SAFETY, INDUSTRIAL; TYPE WEBBING DOUBLE LANYARD, DIMENSIONS L X 1.75 M, MATERIAL TUBULAR WEBBING, HOOK MATERIAL ALUMINIUM, CONNECTION PYLON HOOK, COLOR OLIVE GREEN; SPECIFICATION: EN 50354, 50355, & 362, T-PACK SHOCK ABSORBER, LANYARD TO BE ADJUSTABLE, 24KILO NEWTON ALUMINIUM SCREW-GATE KARBINER, 25 MILLIMETERTIBULAR WEBBING C/W COATED BUCKLES

LANYARD SFTY INDL;WEBBING DOUBLE LANYARD

EA

321

LANYARD; TYPE DOUBLE WEBBING, MATERIAL POLYESTER 100 PCT, LENGTH 1650 M; SHOCK AND SCAFFOLD HOOKS PLUS QUICK LINK, FALL ARREST COLOUR YELLOW/LIME GREEN, WEBBING 35MM/45MM WIDE.

No image LANYARD;DBL WEBBING,POLYESTER 100 PCT EA



_________________________ ____________________________


322

KIT; TYPE DESCELERATION DEVICE, APPLICATION RESCUE, SPECIAL FEATURES RETRACTABLE LANYARD, PACKAGE TYPE EQUIPMENT BAG WITH SLIDE FASTENER; SPECIFICATION: EN 360; CE 0123, 6 METER NO WIRE DEVICE, COVER PLASTIC, WEB CABLE WD 18 MM NYLON, MAX WEIGHT 150 KG BREAKING SRENGH 12 KILO NEWTON. KARABINER; OPENING 17 MM, MATERIAL STEEL. SWIVIL HOOK; OPENING 19 MM, MATERIAL ALUMINIUM, TESTING LAB SERIAL NU SRLW06-99A001

KIT;DESCELERATION DEVICE,RESCUE EA

323

LANYARD; TYPE WORK POSITIONING, MATERIAL NYLON/POLYESTOR/NOEPRENE, LENGTH 2 M, CONNECTION KARABINER HOOKS; SPECIFICATION: EN 358

LANYARD;WORK POSITIONING,LG 2 M EA

324

STRAP, WEBBING; TYPE SLING, WIDTH 50 MM, THICKNESS 2 MM, LENGTH 2 M, MATERIAL NYLON COLOR GREEN, LOAD RATING 39.2 KN, SPECIAL FEATURES ENDLESS, PACKAGE TYPE BAG, NYLON 2 PER KIT, SPECIFICATION: EN 358

STRAP WEBNG;SLING,WD 50 MM,THK 2 MM EA


Unit of Measure



325

KIT; TYPE XCAPE, APPLICATION RESCUE, SPECIAL FEATURES SENTRIFUGAL FORCE BRAKE, PACKAGE TYPE EQUIPMENT BAG WITH SLIDE FASTENER; SITUATED AT BACK OF HARNESS. KIT MUST INCLUDE SELF DESCENDER ROPE`S, 15M ITEM 35205761, 30M ITEM 35205773, 100M ITEM

35205785 & FLEXABLE ANCHOR LINES 15M ITEM 35205797 & 50M ITEM 35205801.

KIT;XCAPE,RESCUE,SENTRIFUGAL FORCE BRAKE

EA

326

ROPE; TYPE SELF DESCENDER, DIMENSIONS DIA 11 MM, MATERIAL NYLON, STRUCTURE KERMANTLE, STRENGTH 2200 KG; FOR USE ON XCAPE RESCUE EUIPMENT

ROPE;SELF DESCENDER,NYLN,15M EA

327 ROPE;SELF DESCENDER,NYLN,30M EA



_________________________ ____________________________


328 ROPE;SELF DESCENDER,NYLN,100M EA

329 ROPE; TYPE FLEXIBLE ANCHOR LINE, DIMENSIONS WD 45 MM X THK 3,5-4 MM, MATERIAL WEBBING, STRUCTURE WEAVE, STRENGTH SAVE WORKING LOAD 3500 KG; FOR USE ON XCAPE RESCUE EUIPMENT

ROPE;FLEXIBLE ANCHOR LINE,WEBBING,15M EA

330 ROPE;FLEXIBLE ANCHOR LINE,WEBBING,50M EA

331

KIT; TYPE FALL ARREST, APPLICATION RESCUE, SPECIAL FEATURES PETZL GEMINI PULLY SYSTEM, PACKAGE TYPE EQUIPMENT BAG WITH SLIDE FASTENER; ASCENDING DEVICE; 0.5 M X 11 MM ROPEWITH 1/4 TURN KARADINER. 2 METER TELESCOPIC POLE, NON CONDUCTIVE AND COMPLETE WITH FROG ATTACHMENT, 2 X 1.5 METER ROUND WEBBING SLINGS; SAFTY KNIFE. KIT MUST INCLUDE ROPES, 50M ITEM 35205813, 100M

ITEM 35205825, 150M ITEM 35205837 & 200M ITEM 35205849

KIT;FALL ARREST,RESCUE EA


Unit of Measure



332

ROPE; TYPE LOW STRETCH, DIMENSIONS 11 MILLIMETER X 12.5 METER REACH PER 50M, MATERIAL NYLON, STRUCTURE KERMANTLE, STRENGTH SAFE WORKING LOAD 2200 KG; FOR USE ON FALL ARREST RESCUE KIT (FARK)

ROPE;LOW STRETCH,NYLN,STRUCT KERMANTLE,50M

EA

333


EA

334


EA



_________________________ ____________________________


335


EA

336

LANYARD, SAFETY; TYPE DOUBLE, LOAD CAPACITY 220 KG, MATERIAL ROPE OR POLYAMIDE, HOOK TYPE SNAP, 65MM, HOOK MATERIAL ALUMINUM, SPECIAL FEATURES 1 TWIST-LOCK KARABINER; TWO

HOOKS

LANYARD SAFETY;DOUBLE,LD CPCTY 220 KG EA

337

HOOK, SAFETY; TYPE ANCHOR, DIMENSIONS 100MM OPENING, MATERIAL ALUMINIUM, FINISH 8MM RELEASE CHORD; SPECIFICATION: EN 795, 15KN BREAKING STRENGHT

HOOK SAFETY;ANCHOR,100MM OPENING EA

338

KIT; TYPE FALL ARREST, APPLICATION RESCUE, QUANTITY 1, SPECIAL FEATURES 8 METER

RETRACTABLE LANYARD, PACKAGE TYPE EQUIPMENT BAG WITH SLIDE FASTENER; SPECIFICATION: CE0123, EN 360, SABS 50360, ;INTERNAL SHOCK ABSORBING FEATURE,COVER PLASTIC WEB WD 25 MM NYLON, MAX WEIGHT 150KG, BREAKING STRENGH 12 KN, STEEL KARABINER 17MM OPENING, 19MM ALUMINIUM SWIVEL HOOK OPENING.

KIT;FALL ARREST,RESCUE,QTY 1 EA


Unit of Measure



339

POLE; TYPE TELESCOPIC, DIMENSIONS 8 METER EXTENDED; SPECIFICATION: EN 795, TO INSTALL ANCHORAGE HOOK FOR FALL ARREST, 1.9 METER WHEN FOLDED

POLE;TELESCOPIC,8 M EXT EA



_________________________ ____________________________


340

KIT; TYPE LADDER, APPLICATION LASHING ATTACHMENT, SPECIAL FEATURES 8 MM ROPE, PACKAGE TYPE COMPLETE SET OF TWO FOR ONE LADDER

KIT;LADDER,LASHING ATTACHMENT,8 MM ROPE

EA

341

STRAP, WEBBING; TYPE SLING, WIDTH 45 MM,

THICKNESS 8 MM, LENGTH 2 M, MATERIAL POLYMIDE, COLOR BLACK, LOAD RATING 220 KG, SPECIAL FEATURES WITH SHARP EDGE PROTECTOR, PACKAGE TYPE BAG, PLASTIC

TRAP WEBBING;SLING,WD 45 MM,THK 8 MM EA

342

PROTECTOR, HEARING; TYPE SUPREME-PRO, DECIBEL 28 DB, COLOR GREEN, MATERIAL PLASTIC/STEEL, SPECIAL FEATURES ADJUSTABLE VOLUME, FURNISHED ITEMS HEAD & NECK BAND, PACKAGE TYPE PLASTIC CONTAINER; SPECIFICATION: ANSI S3.19-1974, EN352-1, EN352-4, EN352-6, SNR=25DB, MEDIUM=21DB, NRR=18BD

PROTECTOR HEARING;SUPREME-PRO,28 DB EA



_________________________ ____________________________





343 JACKET, UTILITY: WORKWEAR, GENDER UNISEX, SLEEVE LENGTH LONG, COLOR ORANGE, JACKET MATERIAL COTTON, DRILL, D59, SPECIAL FEATURES LOGO, TRANSNET, PACKAGE, TYPE ENVELOPE, PLASTIC: SPECIFICATION: CSS 286.21. G26, EN 1149. EN 471. EN531. SANS434 REFERENCE NO: 35180003,

ALL FABRICS MUST BE FIRE RESISTANT (TREATED) AND ANTISTATIC. GARMENTS TO BE TRIPPLE STITCH AT TENTION POINTS.

JACKET, WORKWEAR FIRE RESISTANT, 77 CM. EA

344 JACKET, WORKWEAR FIRE RESISTANT, 82 CM. EA



347 JACKET, WORKWEAR FIRE RESISTANT, 97 CM.

EA


EA


EA


EA


EA


EA


EA


EA


EA


EA


EA


EA



_________________________ ____________________________


359

JACKET, WORKWEAR FIRE RESISTANT, 157 CM.

EA

360 JACKET, WORKWEAR FIRE RESISTANT, SPECIAL.

EA


Unit of

Measure

Unit Price

Excl. VAT

Unit Price

Incl. VAT

361 TROUSER, UTILITY: WORKWEAR, GENDER UNISEX,

COLOR ORANGE, TROUSER MATERIAL COTTON DRILL, D59, GENDER UNISEX, STYLE 2 PIECE, LEG BOTTOM TYPE PLAIN HEM, POCKET TYPE ONE HIP: ONE RULE: TWO SIDE, TROUSER OCKET QUANTITY 4, CLOSURE METHOD SLIDE FASTTENER. SPECIAL FEATURES WITH REFLECTIVE STRIPS, PACKAGE TYPE ENVELOPE, AND PLASTIC: SPECIFICATION: CSS 286.21. G26 EN 1149. EN 471. EN531. SANS434 REFERENCE NO: 35180217 ALL FABRICS MUST BE FIRE RESISTANT (TREATED) AND ANTISTATIC. GARMENTS TO BE TRIPPLE STITCH AT TENTION POINTS.

TROUSERS, WORKWEAR FIRE RESISTANT, 67 CM.

PR

362


PR

363


PR

364


PR

365


PR

366


PR

367


PR

368


PR

369


PR

370


PR

371


PR

372


PR

373


PR

374


PR



_________________________ ____________________________


375


PR

376


PR

377


PR

378

TROUSERS, WORKWEAR FIRE RESISTANT, SPECIAL

PR


Unit of Measure



379 OVERALL, UTILITY; TYPE CONTI SUIT, GARMENT GENDER UNISEX, MATERIAL COTTON 50/POLYESTER 50, DESIGN TYPE 2 PIECE, COLOR BLUE TONE/ORANGE, CLOSURE METHOD ZIP YKK, SPECIAL FEATURES REFLECTIVE STRIPS SILVER, SEWN ON FRONT CHEST/BACK/SLEEVES OF JACKET/BOTH LEGS OF PANTS, TRIPLE STITCH; JACKET: CONCEALED FRONT; WITH 3 PATCH POCKETS; WITH STITCHED

DOWN FLAPS PANTS: BLUE, NAVY, FLAT FRONT, WITH “TRANSNET” LOGO EMBROIDED ON LEFT BREAST OR POCKET AND “FREIGHT RAIL” EMBROIDED ON RIGHT BREAST,

No image

OVERALL UTILITY;CONTI SUIT,82 CM, UNISEX EA

380 OVERALL UTILITY;CONTI SUIT,87 CM, UNISEX EA



383

OVERALL UTILITY;CONTI SUIT,102 CM, UNISEX

EA

384


EA

385


EA

386


EA

387


EA

388


EA

389 OVERALL UTILITY;CONTI SUIT,132 CM, UNISEX

EA

390

OVERALL, UTILITY; TYPE CONTI SUIT, GARMENT SIZE 82 CM, GENDER UNISEX, MATERIAL DENIM, DESIGN TYPE 2 PIECE, COLOR BLUE, CLOSURE METHOD ZIP YKK; WITH ONE SILVER/ORANGE REFLECTOR TAPE SEWN ON EACH OF THE JACKET

No image OVERALL UTILITY;CONTI SUIT,82 CM, UNISEX EA



_________________________ ____________________________


SLEEVES AS WELL AS THE BACK/FRONT OF THE JACKET. THE JACKET MUST HAVE A CONCEALED FRONT, THREE PATCH POCKETS WITH STICHED DOWN FLAPS/TRIPLE STICH. THE PANTS MUST HAVE SILVER/ORANGE REFLECTOR TAPE ON BOTH LEGS OF THE PANTS, A REINFORCED CROTCH, METAL BUTTON, TRIPLE STICHED INNER TROUSER LEG/BACK RISE, BACK PATCH POCKET/TWO SIDE SLANT POCKETS. SANS APPROVED; COTTON 100%, WITH TRANSNET FREIGHT RAIL LOGO EMBROIDED ON LEFT BREAST OR POCKET


Unit of Measure



391

OVERALL, UTILITY; TYPE CONTI SUIT, GARMENT SIZE 82 CM, GENDER UNISEX, MATERIAL DENIM, DESIGN TYPE 2 PIECE, COLOR BLUE, CLOSURE METHOD ZIP YKK; WITH ONE SILVER/ORANGE REFLECTOR TAPE SEWN ON EACH OF THE JACKET SLEEVES AS WELL AS THE BACK/FRONT OF THE JACKET. THE JACKET MUST HAVE A CONCEALED FRONT, THREE PATCH POCKETS WITH STICHED DOWN FLAPS/TRIPLE STICH. THE PANTS MUST HAVE SILVER/ORANGE REFLECTOR TAPE ON BOTH LEGS OF THE PANTS, A REINFORCED CROTCH, METAL BUTTON, TRIPLE STICHED INNER TROUSER LEG/BACK RISE, BACK PATCH POCKET/TWO SIDE SLANT POCKETS. SANS APPROVED; COTTON 100%, WITH TRANSNET FREIGHT RAIL LOGO EMBROIDED ON LEFT BREAST OR POCKET

No image


EA

392


EA

393


EA

394


EA

395


EA

396


EA

397


EA

398


EA

399


EA

400 OVERALL UTILITY;CONTI SUIT,132 CM, UNISEX

EA



_________________________ ____________________________


401

T-SHIRT, MEN'S; TYPE CREW NECK, COMMERCIAL SIZE 2 EXTRA LARGE, MATERIAL COTTON 100 PCT, COLOR NEON ORANGE; 155 GRAM

No image

T-SHIRT MEN'S;CREW NECK,2XL,NEON ORANGE

EA

402

T-SHIRT MEN'S;CREW NECK,3XL,NEON ORANGE

EA

403

T-SHIRT MEN'S;CREW NECK,L,COTTON 100 PCT

EA

404

T-SHIRT MEN'S;CREW NECK,M,COTTON 100 PCT

EA

405 T-SHIRT MEN'S;CREW NECK,S,COTTON 100 PCT

EA

406

EA



_________________________ ____________________________


Delivery Lead-Time from date of purchase order : ____________________ [days/weeks]

Notes to Pricing:

a) Respondents are to note that if the price offered by the highest scoring bidder is not market-

related, Transnet may not award the contract to that Respondent. Transnet may-

(i) negotiate a market-related price with the Respondent scoring the highest points or

cancel the RFQ;

(ii) if that Respondent does not agree to a market-related price, negotiate a market-related

price with the Respondent scoring the second highest points or cancel the RFQ;

(iii) if the Respondent scoring the second highest points does not agree to a market-related

price, negotiate a market-related price with the Respondent scoring the third highest

points or cancel the RFQ.

If a market-related price is not agreed with the Respondent scoring the third highest points,

Transnet must cancel the RFQ.

b) All Prices must be quoted in South African Rand.

c) To facilitate like-for-like comparison bidders must submit pricing strictly in accordance with this price

schedule and not utilise a different format. Deviation from this pricing schedule could result in a bid

being disqualified.

d) Please note that should you have offered a discounted price(s), Transnet will only consider such

price discount(s) in the final evaluation stage if offered on an unconditional basis



_________________________ ____________________________


SECTION 4

CERTIFICATE OF ACQUAINTANCE WITH RFQ DOCUMENTS

By signing this certificate the Respondent is deemed to acknowledge that he/she has made

himself/herself thoroughly familiar with, and agrees with all the conditions governing this RFQ.

This includes those terms and conditions contained in any printed form stated to form part hereof,

including but not limited to the documents stated below. As such, Transnet will recognise no claim

for relief based on an allegation that the Respondent overlooked any such condition or failed

properly to take it into account in calculating tendered prices or any other purpose:

1. Transnet’s General Bid Conditions*

2. Standard RFQ Terms and Conditions for the supply of Goods or Services to Transnet

3. Transnet’s Supplier Integrity Pact*

4. Non-disclosure Agreement*

5. Vendor Application Form* and all supporting documents (first time vendors only). Alternatively, for all

existing vendors, please complete the table below under the heading “Existing vendors”.

Respondents are to note that the documents marked with a “*” are available on request or at the

Transnet website (www.transnet.net). Please click on “Business with Us”, proceed to the tab

“Tenders” and then click on “Standard Bid Documents”.

Existing vendors: existing vendors are required to confirm whether all the information (e.g. company address,

contact details, banking details, etc.) relating to the existing vendor number is still correct at the time of

submission of this bid or update their information in the table below:

Transnet Operating

Division [e.g. TFR,

TE, etc]

Vendor Number Information still

current [tick if

applicable]

Information change [indicate detail

of change/s & attach appropriate

proof]

Should the Bidder find any terms or conditions stipulated in any of the relevant documents quoted in the RFQ

unacceptable, it should indicate which conditions are unacceptable and offer alternatives by written submission

on its company letterhead, attached to its submitted Bid. Any such submission shall be subject to review by

Transnet’s Legal Counsel who shall determine whether the proposed alternative(s) are acceptable or otherwise,

as the case may be. A material deviation from the Standard terms or conditions could result in disqualification.

Bidders accept that an obligation rests on them to clarify any uncertainties regarding any bid to which they

intend to respond, before submitting the bid. The Bidder agrees that he/she will have no claim based on an

allegation that any aspect of this RFQ was unclear but in respect of which he/she failed to obtain clarity.

http://www.transnet.net/



_________________________ ____________________________


The bidder understands that his/her Bid will be disqualified if this Certificate of Acquaintance with RFQ

documents included in the RFQ as a returnable document, is found not to be true and complete in every respect.

SIGNED at ___________________________ on this _____ day of __________________________ 20___

WITNESSES

1. Address

Signature

Name Date

2. Address

Signature

Name Date

RESPONDENT’S AUTHORISED REPRESENTATIVE

Signature Designation

Name Date



_________________________ ____________________________


SECTION 5

RFQ DECLARATION AND BREACH OF LAW FORM

NAME OF ENTITY: __________________________________________________________________

We ___________________________________________________________ do hereby certify that:

1. Transnet has supplied and we have received appropriate responses to any/all questions [as

applicable] which were submitted by ourselves for RFQ Clarification purposes;

2. we have received all information we deemed necessary for the completion of this Request for

Quotation [RFQ];

3. we have been provided with sufficient access to the existing Transnet facilities/sites and any and

all relevant information relevant to the Supply of the Goods as well as Transnet information and

Employees, and has had sufficient time in which to conduct and perform a thorough due

diligence of Transnet’s operations and business requirements and assets used by Transnet.

Transnet will therefore not consider or permit any pre- or post-contract verification or any

related adjustment to pricing, service levels or any other provisions/conditions based on any

incorrect assumptions made by the Respondent in arriving at his Bid Price.

4. at no stage have we received additional information relating to the subject matter of this RFQ

from Transnet sources, other than information formally received from the designated Transnet

contact(s) as nominated in the RFQ documents;

5. we have complied with all Obligations of the Bidder/Supplier as indicated in paragraph 3 of the

Transnet Supplier Integrity which includes but is not limited to ensuring that we take all

measures necessary to prevent corrupt practices, unfairness and illegal activities in order to

secure or in furtherance to secure a contract with Transnet;

6. we are satisfied, insofar as our entity is concerned, that the processes and procedures adopted

by Transnet in issuing this RFQ and the requirements requested from Bidders in responding to

this RFQ have been conducted in a fair and transparent manner; and

7. furthermore, we declare that a family, business and/or social relationship exists / does not

exist [delete as applicable] between an owner / member / director / partner / shareholder of

our entity and an employee or board member of the Transnet Group including any person who

may be involved in the evaluation and/or adjudication of this Bid.

8. In addition, we declare that an owner / member / director / partner / shareholder of our entity

is / is not [delete as applicable] an employee or board member of the Transnet Group.

9. If such a relationship as indicated in paragraph 6 and/or 7 exists, the Respondent is to complete

the following section:



_________________________ ____________________________


FULL NAME OF OWNER/MEMBER/DIRECTOR/ PARTNER/SHAREHOLDER: ADDRESS:

________________________________________________________________________________

________________________________________________________________________________

Indicate nature of relationship with Transnet:

_____________________________________________________________________________________

________________________________________________________________________________

[Failure to furnish complete and accurate information in this regard will lead to the disqualification of a

response and may preclude a Respondent from doing future business with Transnet]

10. We declare, to the extent that we are aware or become aware of any relationship between

ourselves and Transnet [other than any existing and appropriate business relationship with

Transnet] which could unfairly advantage our entity in the forthcoming adjudication process, we

shall notify Transnet immediately in writing of such circumstances.

BREACH OF LAW

11. We further hereby certify that I/we have/have not been [delete as applicable] found guilty

during the preceding 5 [five] years of a serious breach of law, including but not limited to a

breach of the Competition Act, 89 of 1998, by a court of law, tribunal or other administrative

body. The type of breach that the Respondent is required to disclose excludes relatively minor

offences or misdemeanours, e.g. traffic offences. This includes the imposition of an

administrative fine or penalty.

Where found guilty of such a serious breach, please disclose:

NATURE OF BREACH:

______________________________________________________________________________

______________________________________________________________________________

______________________________________________________________________________

DATE OF BREACH:_____________________________

Furthermore, I/we acknowledge that Transnet SOC Ltd reserves the right to exclude any

Respondent from the bidding process, should that person or entity have been found guilty of a

serious breach of law, tribunal or regulatory obligation.

SIGNED at ___________________________ on this _____ day of ______________________ 20___



_________________________ ____________________________


This person is hereto duly authorised to

sign for and on behalf of the company

As Witness

Registration No of Company/ CC

Registration Name of Company /CC

Name Name

Position Position

Signature Signature

Date Date

Place Place



_________________________ ____________________________


SECTION 6

B-BBEE PREFERENCE POINTS CLAIM FORM

This preference form must form part of all bids invited. It contains general information and serves as a claim

for preference points for Broad-Based Black Economic Empowerment [B-BBEE] Status Level of Contribution.

NB: BEFORE COMPLETING THIS FORM, BIDDERS MUST STUDY THE GENERAL CONDITIONS,

DEFINITIONS AND DIRECTIVES APPLICABLE IN RESPECT OF B-BBEE, AS PRESCRIBED

IN THE PREFERENTIAL PROCUREMENT REGULATIONS, 2017.

1. GENERAL CONDITIONS

1.1 The following preference point systems are applicable to all bids:

- the 80/20 system for requirements with a Rand value of up to R50 000 000 (all applicable taxes

included); and

- the 90/10 system for requirements with a Rand value above R50 000 000 (all applicable taxes

included).

1.2 The value of this bid is estimated to not exceed R50 000 000 (all applicable taxes included) and

therefore the 80/20 preference point system shall be applicable.

1.3 Preference points for this bid shall be awarded for:

(a) Price; and

(b) B-BBEE Status Level of Contribution.

1.4 The maximum points for this bid are allocated as follows:

POINTS

PRICE 80

B-BBEE STATUS LEVEL OF CONTRIBUTION 20

Total points for Price and B-BBEE must not exceed 100

1.5 Failure on the part of a bidder to submit a B-BBEE Verification Certificate from a Verification Agency

accredited by the South African Accreditation System [SANAS], or a sworn affidavit confirming annual

turnover and level of black ownership in case of all EMEs and QSEs with 51% black ownership or more

together with the bid, will be interpreted to mean that preference points for B-BBEE status level of

contribution are not claimed. Certificates issued by a Registered Auditor approved by the Independent

Board of Auditors [IRBA] to Large Enterprises or QSEs with less than 51% black ownership have been

discontinued but such valid certificates that were issued before 1 January 2017 may be used until they

phase out completely by December 2017.

1.6 The purchaser reserves the right to require of a bidder, either before a bid is adjudicated or at any time

subsequently, to substantiate any claim in regard to preferences, in any manner required by the

purchaser.

2. DEFINITIONS

(a) “all applicable taxes” includes value-added tax, pay as you earn, income tax, unemployment

insurance fund contributions and skills development levies;

(b) “B-BBEE” means broad-based black economic empowerment as defined in section 1 of the Broad-

Based Black Economic Empowerment Act;



_________________________ ____________________________


(c) “B-BBEE status level of contributor” means the B-BBEE status received by a measured entity

based on its overall performance using the relevant scorecard contained in the Codes of Good

Practice on Black Economic Empowerment, issued in terms of section 9(1) of the Broad-Based

Black Economic Empowerment Act;

(d) “bid” means a written offer in a prescribed or stipulated form in response to an invitation by an

organ of state for the provision of services, works or goods, through price quotations, advertised

competitive bidding processes or proposals;

(e) “Black designated group” has meaning assigned to it in codes of good practice issued in terms

of section 9(1) of the Broad-Based Black Economic Empowerment Act.

(f) “Black People” meaning assigned to in Section 1 of Broad-Based Black Economic Empowerment

Act.

(g) “Broad-Based Black Economic Empowerment Act” means the Broad-Based Black Economic

Empowerment Act, 2003 (Act No. 53 of 2003);

(h) “CIPC” means the Companies and Intellectual Property Commission, formerly known as CIPRO,

the Companies and Intellectual Property Registration Office.

(i) “comparative price” means the price after the factors of a non-firm price and all unconditional

discounts that can be utilized have been taken into consideration;

(j) “consortium or joint venture” means an association of persons for the purpose of combining

their expertise, property, capital, efforts, skill and knowledge in an activity for the execution of a

contract;

(k) “contract” means the agreement that results from the acceptance of a bid by an organ of state;

(l) “co-operative” means a co-operative registered in terms of section 7 of Cooperatives Act, 2005

(Act No. 14 of 2005)

(m) “Designated Group” means - i) Black designated groups; ii) Black People; iii) Women; iv)

people with disabilities or v) Small enterprise, as defined in Section 1 of National Small Enterprise

Act, (102 of 1996)

(n) “Designated Sector” means, sub-sector or industry or product designated in terms of regulation

8(1)(a)

(o) “EME” means an Exempted Micro Enterprise as defines by Codes of Good Practice under section 9

(1) of the Broad-Based Black Economic Empowerment Act, 2003 (Act No. 53 of 2003);

(p) “firm price” means the price that is only subject to adjustments in accordance with the actual

increase or decrease resulting from the change, imposition, or abolition of customs or excise duty

and any other duty, levy, or tax, which, in terms of the law or regulation, is binding on the

contractor and demonstrably has an influence on the price of any supplies, or the rendering costs

of any service, for the execution of the contract;

(q) “functionality” means the ability of a bidder to provide goods or services in accordance with

specification as set out in the bid documents;

(r) “Military Veteran” has meaning assigned to it in Section 1 of Military Veterans Act, 2011 (Act

No. 18 of 2011);

(s) “National Treasury” has meaning assigned to it in Section 1 of Public Finance Management Act,

1999 (Act No. 1 of 1999);

(t) “non-firm prices” means all prices other than “firm” prices;

(u) “person” includes a juristic person;

(v) “People with disabilities” meaning assigned to it in terms of Section 1 of Employment Equity

Act, 1998 (Act No. 55of 1998)



_________________________ ____________________________


(w) “Price” includes all applicable taxes less all unconditional discounts.

(x) “Proof of B-BBEE Status Level of Contributor” i) the B-BBBEE status level certificate issued

by an unauthorised body or person; ii) a sworn affidavit as prescribed by the B-BBEE Codes of

Good Practice; or iii) any other requirement prescribed in terms of the Broad- Based Black

Economic Empowerment Act.

(y) “Rural Area” i) a sparsely populated area in which people farm or depend on natural resources,

including villages and small towns that are dispersed through the area; or ii) an area including a

large settlement which depends on migratory labour and remittances and government social grants

for survival, and may have traditional land tenure system.

(z) “QSE” means a Qualifying Small EEnterprise as defines by Codes of Good Practice under section 9

(1) of the Broad-Based Black Economic Empowerment Act, 2003 ( Act No. 53 of 2003);

(aa) “rand value” means the total estimated value of a contract in South African currency, calculated

at the time of bid invitations, and includes all applicable taxes and excise duties;

(bb) “sub-contract” means the primary contractor’s assigning, leasing, making out work to, or

employing, another person to support such primary contractor in the execution of part of a project

in terms of the contract;

(cc) “total revenue” bears the same meaning assigned to this expression in the Codes of Good

Practice on Black Economic Empowerment, issued in terms of section 9(1) of the Broad-Based

Black Economic Empowerment Act and promulgated in the Government Gazette on 9 February

2007;

(dd) “Township” means an urban living area that any time from the late 19th century until 27 April

1994, was reserved for black people, including areas developed for historically disadvantaged

individuals post 27 April 1994

(ee) “Treasury” meaning assigned to it in Section 1 of the Public Finance Management Act, 1999 (Act

No. 1 of 1999)

(ff) “trust” means the arrangement through which the property of one person is made over or

bequeathed to a trustee to administer such property for the benefit of another person; and

(gg) “trustee” means any person, including the founder of a trust, to whom property is bequeathed in

order for such property to be administered for the benefit of another person.

(hh) “Youth” meaning assigned to it in terms of Section 1 of National youth Development Agency Act,

2008 (Act No. 54 of 2008)

3. ADJUDICATION USING A POINT SYSTEM

3.1 The bidder obtaining the highest number of total points will be awarded the contract.

3.2 Preference points shall be calculated after prices have been brought to a comparative basis taking

into account all factors of non-firm prices and all unconditional discounts.

3.3 Points scored must be rounded off to the nearest 2 decimal places.

3.4 In the event that two or more bids have scored equal total points, the successful bid must be the

one scoring the highest number of preference points for B-BBEE.

3.5 However, when functionality is part of the evaluation process and two or more bids have scored

equal points including equal preference points for B-BBEE, the successful bid must be the one

scoring the highest score for functionality.

3.6 Should two or more bids be equal in all respects, the award shall be decided by the drawing of lots.

POINTS AWARDED FOR PRICE

3.7 THE 80/20 PREFERENCE POINT SYSTEMS



_________________________ ____________________________


A maximum of 80 points is allocated for price on the following basis:

80/20

min

min180

P

PPtPs

Where

Ps = Points scored for comparative price of bid under consideration

Pt = Comparative price of bid under consideration

Pmin = Comparative price of lowest acceptable bid

4. POINTS AWARDED FOR B-BBEE STATUS LEVEL OF CONTRIBUTION

4.1 In terms of Regulation 6 (2) and 7 (2) of the Preferential Procurement Regulations, preference

points must be awarded to a bidder for attaining the B-BBEE status level of contribution in

accordance with the table below:

B-BBEE Status Level of

Contributor

Number of points

(80/20 system)

1 20

2 18

3 14

4 12

5 8

6 6

7 4

8 2

Non-compliant contributor 0

4.2 A bidder who qualifies as an EME in terms of the B-BBEE Act must submit a sworn affidavit

confirming Annual Total Revenue and Level of Black Ownership. Furthermore EMEs may also obtain a

sworn affidavit from CIPC (formerly CIPRO) Self Service Terminals when registering a business or

filing annual returns. In these instances Transnet would require proof of turnover as well as proof of

ownership. Sworn affidavits must substantially comply with the format that can be obtained on the

DTI’s website at www.dti.gov.za/economic_empowerment/bee_codes.jsp.

4.3 QSEs that are at least 51% Black owned or higher are only required to obtain a sworn affidavit on an

annual basis confirming that the entity has an Annual Total Revenue of R50 million or less and the

entity’s Level of Black ownership.

4.4 A Bidder other than EME or a QSE that is at least 51% Black owned must submit their original and

valid B-BBEE status level verification certificate or a certified copy thereof, substantiating their B-

BBEE rating issued by a Registered Auditor approved by IRBA or a Verification Agency accredited by

SANAS.

4.5 A trust, consortium or joint venture (including unincorporated consortia and joint ventures) must

submit a consolidated B-BBEE Status Level verification certificate for every separate bid.

4.6 Tertiary Institutions and Public Entities will be required to submit their B-BBEE status level certificates

in terms of the specialized scorecard contained in the B-BBEE Codes of Good Practice.

4.7 A person will not be awarded points for B-BBEE status level if it is indicated in the bid documents that

such a bidder intends sub-contracting more than 25% of the value of the contract to any other

http://www.dti.gov.za/economic_empowerment/bee_codes.jsp



_________________________ ____________________________


enterprise that does not qualify for at least the points that such a bidder qualifies for, unless the

intended sub-contractor is an EME that has the capability and ability to execute the sub-contract.

4.8 A person awarded a contract may not sub-contract more than 25% of the value of the contract to

any other enterprise that does not have an equal or higher B-BBEE status level than the person

concerned, unless the contract is sub-contracted to an EME that has the capability and ability to

execute the sub-contract.

4.9 Bidders are to note that the rules pertaining to B-BBEE verification and other B-BBEE requirements

may be changed from time to time by regulatory bodies such as National Treasury or the DTI. It is

the Bidder’s responsibility to ensure that his/her bid complies fully with all B-BBEE requirements at

the time of the submission of the bid.

5. BID DECLARATION

5.1 Bidders who claim points in respect of B-BBEE Status Level of Contribution must complete the

following:

6. B-BBEE STATUS LEVEL OF CONTRIBUTION CLAIMED IN TERMS OF PARAGRAPHS 1.4 AND

5.1

6.1 B-BBEE Status Level of Contribution: . = ………(maximum of 10 or 20 points)

(Points claimed in respect of paragraph 7.1 must be in accordance with the table reflected in

paragraph 5.1 and must be substantiated by means of a B-BBEE certificate issued by a Verification

Agency accredited by SANAS or a Registered Auditor approved by IRBA or a sworn affidavit.

7. SUB-CONTRACTING

7.1 Will any portion of the contract be sub-contracted?

(Tick applicable box)

YES NO

7.1.1 If yes, indicate:

i) What percentage of the contract will be subcontracted............…………….…………%

ii) The name of the sub-contractor…………………………………………………………..

iii) The B-BBEE status level of the sub-contractor......................................……………..

iv) Whether the sub-contractor is an EME.


YES NO

v) Specify, by ticking the appropriate box, if subcontracting with an enterprise in terms of

Preferential Procurement Regulations,2017:

Designated Group: An EME or QSE which is at last 51% owned by: EME √ QSE √

Black people

Black people who are youth

Black people who are women

Black people with disabilities

Black people living in rural or underdeveloped areas or townships

Cooperative owned by black people

Black people who are military veterans

OR

Any EME

Any QSE



_________________________ ____________________________


8. DECLARATION WITH REGARD TO COMPANY/FIRM

8.1 Name of company/firm:…………………………………………………………………………….

8.2 VAT registration number:……………………………………….…………………………………

8.3 Company registration number:…………….……………………….…………………………….

8.4 TYPE OF COMPANY/ FIRM

Partnership/Joint Venture / Consortium

One person business/sole propriety

Close corporation

Company

(Pty) Limited

[TICK APPLICABLE BOX]

8.5 DESCRIBE PRINCIPAL BUSINESS ACTIVITIES

………………………………………………………………………………………………………………………………………………

………………………………………………………………………………………………………………………………………………..

8.6 COMPANY CLASSIFICATION

Manufacturer

Supplier

Professional service provider

Other service providers, e.g. transporter, etc.

[TICK APPLICABLE BOX]

8.7 Total number of years the company/firm has been in business:……………………………

8.8 I/we, the undersigned, who is / are duly authorised to do so on behalf of the company/firm, certify

that the points claimed, based on the B-BBE status level of contribution indicated in paragraph 7 of

the foregoing certificate, qualifies the company/ firm for the preference(s) shown and I / we

acknowledge that:

i) The information furnished is true and correct;

ii) The preference points claimed are in accordance with the General Conditions as indicated in

paragraph 1 of this form;

iii) In the event of a contract being awarded as a result of points claimed as shown in paragraph 7,

the contractor may be required to furnish documentary proof to the satisfaction of the purchaser

that the claims are correct;

iv) If a bidder submitted false information regarding its B-BBEE status level of contributor, local

production and content, or any other matter required in terms of the Preferential Procurement

Regulations, 2017 which will affect or has affected the evaluation of a bid, or where a bidder

has failed to declare any subcontracting arrangements or any of the conditions of contract have

not been fulfilled, the purchaser may, in addition to any other remedy it may have

(a) disqualify the person from the bidding process;

(b) recover costs, losses or damages it has incurred or suffered as a result of that person’s conduct;

(c) cancel the contract and claim any damages which it has suffered as a result of having to make less favourable arrangements due to such cancellation;



_________________________ ____________________________


(d) if the successful bidder subcontracted a portion of the bidder to another person without disclosing it, Transnet reserves the right to penalise the bidder up to 10 percent of the value of the contract;

(e) recommend that the bidder or contractor, its shareholders and directors, or only the shareholders and directors who acted on a fraudulent basis, be restricted by the National Treasury from obtaining business from any organ of state for a period not exceeding 10 years, after the audi alteram partem (hear the other side) rule has been applied; and

(f) forward the matter for criminal prosecution.

SIGNATURE(S) OF BIDDERS WITNESSES

Signature

1. Witness signature

Name

Date

2. Witness signature

Signed at



_________________________ ____________________________


SECTION 7: RFQ CLARIFICATION REQUEST FORM

RFQ No: Erac-Var-23795

RFQ deadline for questions / RFQ Clarifications: Before 23 May 2017

TO: Transnet SOC Ltd

ATTENTION: Ntuthuko Nhlapo

EMAIL [[email protected]]

DATE: _____________________________________________

FROM: _____________________________________________

_____________________________________________

RFQ Clarification No [to be inserted by Transnet] ERAC-VAR-23795

REQUEST FOR RFQ CLARIFICATION

_____________________________________________________________________________________

_____________________________________________________________________________________

_____________________________________________________________________________________

_____________________________________________________________________________________

_____________________________________________________________________________________

_____________________________________________________________________________________

_____________________________________________________________________________________

_____________________________________________________________________________________

_____________________________________________________________________________________

_____________________________________________________________________________________

_____________________________________________________________________________________

_____________________________________________________________________________________

_____________________________________________________________________________________

_____________________________________________________________________________________

_____________________________________________________________________________________

_____________________________________________________________________________________

_____________________________________________________________________________________

____________________________________________________________________



_________________________ ____________________________


SECTION 8: CERTIFICATE OF ATTENDANCE OF COMPULSORY RFQ BRIEFING

It is hereby certified that –

1. ___________________________________

2. ___________________________________

Representative(s) of _______________________________________ [name of entity]

attended the RFQ briefing in respect of the proposed Services to be rendered in terms of this RFQ on

_________________________20___

____________________________ ______________________________

TRANSNET’S REPRESENTATIVE RESPONDENT’S REPRESENTATIVE

DATE _______________________ DATE _________________________

EMAIL ________________________



_________________________ ____________________________


ANNEXURE A: CLAUSE-BY-CLAUSE SCHEDULE

COMPLIANCE WITH SPECIFICATION SCHEDULE

The compliance response is to contain ONLY the following statements, “Noted”, “Comply”, “Partial Compliance” or “Do not comply”.

Noted is to be applied against statements and either of the other responses for all other clauses. Where either “Partial Compliance” is inserted, remarks as to the reason for the deviation

from the requirement is required.



_________________________ ____________________________


Item - Short Description Compliance aspects Compliance response Explanation / Deviation / Reason

CREAM BARRIER;NIVEA OR EQUIVALENT, SPF 40, 200 ML

CREAM, BARRIER

INGREDIENT AND STRENGTH SPF 40

CONTAINER, CAPACITY 200 ML

PROTECTION PROVIDED ULTRAVIOLET

CONTAINER TYPE BOTTLE, PLASTIC

NON STICKY;EASILY ABSORBED

WATER RESISTANT


PROTECTOR, HEARING; TYPE EARMUFFS

DECIBEL (DB) NNR 21

COLOR VARIOUS



_________________________ ____________________________




MATERIAL FOAM/POLYVINYL CHLORIDE/RUBBER

PACKAGE TYPE BOX

SABS 1451/LATEST PART I & EN 352 TYPE 1

AURAL,SOUND

PLUG EAR; COMPRESSION, RUBBR, NNR 25 DB

PLUG, EAR; TYPE COMPRESSION

MATERIAL RUBBER

DIMENSIONS 600 CONNECTION CORD MM

SPECIAL FEATURES NNR 25 DB

PACKAGE TYPE CONTAINER WITH LID

SPECIFICATION NUMBER SABS 1451/1988 PART 2

SUPPLIED IN PAIRS


PROTECTOR, HEARING, TYPE NOISE CLIPPER



_________________________ ____________________________


DECIBEL (DB) 85-120 DB

COLOR VARIOUS COLOURS

MATERIAL ACRYLIC

FEATURES SET FILTER



FURNISHED ITEMS CLEANING CLOTH AND WAX REMOVER

PACKAGE TYPE POUCH

SPECIFICATION SABS 1451-2:1988

PERSONAL HEARING PROTECTOR SET FOR MAXIMUM ATTENUATION

PROTECTOR HEARNG;TACTICAL PRO,26 DB

PROTECTOR, HEARING; TYPE TACTICAL PRO

DECIBEL (DB) 26 DB

COLOR BLACK

MATERIAL PLASTIC/STEEL

FEATURES ADJUSTABLE VOLUME



_________________________ ____________________________


PACKAGE TYPE HEAVY DUTY CARRYING BAG

FOLDING HEADBAND

CAP,WORK,WELDER CAP, UTILITY; WELDER

SPECIFICATION NUMBER CSS 286.27/LATEST

STYLE CP 56; "OXFORD BLUE"DRILL

SHALL HAVE THREE SHAPED PANELS THAT FORM THE CROWN AND A FLAP


BALACLAVA;OPEN FACE,ONE SIZE FITS ALL

BALACLAVA

TYPE OPEN FACE

COMMERCIAL SIZE ONE SIZE FITS ALL

MATERIAL ACRYLIC

COLOR BLACK

SPECIAL FEATURES EXTREME COLD WEATHER KNIT TYPE

PLAIN (STITCH)

WEIGHT, 110 GRAMS



_________________________ ____________________________


HAT UTLTY;BUSH,FLOPPY,STEWART BLUE HAT, UTILITY; TYPE BUSH, STYLE FLOPPY

COLOR STEWART BLUE

MATERIAL COTTON D59

SPECIAL FEATURES TRANSNET LOGO

PACKAGE TYPE PLASTIC ENVELOPE

SPECIFICATION: CSS 286.21 G32/SEPTEMBER 2007

PACK OF 10, REFERENCE ITEM NO. 35/113686

CUT, MAKE AND TRIM CLOTH


BOOTS SFTY;CHUKKA ,STEEL CAP

BOOTS, SAFETY; TYPE CHUKKA OR EQUIVALENT, FOOTWEAR

TOE TYPE STEEL CAP

MATERIAL CORRECTED GRAIN LEATHER UPPER

COLOR BLACK

FASTENING METHOD D-RING/LACE



_________________________ ____________________________


SOLE MATERIAL DUAL DENSITY POLYURETHANE

SPECIFICATION: CSS 287.108/JULY 2011, SANS 20345/LATEST, REFERENCE NO: 35/113512

RANDOM WEB FABRIC INSOLE

STEEL OR PLASTIC SHANK.

BOOTS SAFETY; MALE BOOTS, SAFETY; FOOTWEAR, GENDER MALE

TOE TYPE EXTRA WIDE STEEL CAP

200J RESISTANT

MATERIAL BARTAN LEATHER UPPER

COLOR BLACK

FASTENING METHOD D-RING/LACE-UP

SOLE MATERIAL DOUBLE DENSITY POLYURETHANE


BOOTS SFTY;CHUKKA OR EQUIVALENT, FEM,BLACK

BOOTS, SAFETY; TYPE CHUKKA OR EQUIVALENT, FOOTWEAR, GENDER FEMALE

TOE TYPE STEEL TOE CAP

MATERIAL CORRECTED GRAIN LEATHER UPPER

COLOR BLACK

FASTENING METHOD D-RING/LACE



_________________________ ____________________________



PACKAGE TYPE BOX

SPECIFICATION: CSS 287.108 / JULY 2011, SANS 20345/LATEST, REFERENCE NO: 35/154792

RANDOM WEB FABRIC INSOLE

STEEL OR PLASTIC SHANK

ACID/OIL RESISTANT HEEL/SOLE

BOOTS, NON-STEEL TOE CAP BOOTS, SAFETY; TYPE CHAKKA, FOOTWEAR.GENDER UNISEX

NO TOE PUFF

CHROME TANNED LEATHER,BLACK

EYELETS/HOOKS OR D-RING/LACE-UP

SOLE DUAL NON DENSITY POLYURETHANE

SHANK REINFORCEMENT MOLDED INTO MIDSOLE


BOOTS SAFETY; MALE,WALNUT

BOOTS, SAFETY; FOOTWEAR SIZE 10, GENDER MALE

TOE TYPE EXTRA WIDE STEEL CAP



_________________________ ____________________________


MATERIAL LEATHER UPPER

COLOR WALNUT

FASTENING METHOD LACE-UP-UP


SPECIAL FEATURES ACID/OIL RESISTANT

BOOTS SFTY;COMBAT STYLE,STEEL CAP BOOTS, SAFETY; TYPE COMBAT STYLE, FOOTWEAR, GENDER UNISEX

TOE TYPE STEEL

MATERIAL BUFFALO LEATHER

COLOR BROWN

FASTENING METHOD LACE WITH TWO BUCKLES AND STRAPS

SOLE MATERIAL

VULCANIZED RUBBER

PACKAGE TYPE CORRUGATED BOX



_________________________ ____________________________



BOOTS KNEE;GUM SAFETY,FTWR,PVC BOOTS, KNEE; TYPE GUM SAFETY, FOOTWEAR

MATERIAL POLYVINYL CHLORIDE

COLOR BLACK

FEATURES WITH STEEL TOE CAPS

ENVIRONMENTAL PROTECTION OIL PROTECTION

CALF LENGTH

BOOTS SFTY; MALE BOOTS, SAFETY; FOOTWEAR SIZE 232(4), GENDER MALE

TOE TYPE STEEL CAP

MATERIAL SMOOTH GRAIN LEATHER

COLOR BLACK

FASTENING METHOD SHOE LACE

SOLE MATERIAL DUAL DENSITY

SPECIAL FEATURES STEEL MIDSOLE

PACKAGE TYPE BOX



_________________________ ____________________________



BOOTS SFTY; FEM BOOTS, SAFETY; FOOTWEAR, GENDER FEMALE

TOE TYPE STEEL CAP

MATERIAL SMOOTH GRAIN LEATHER

COLOR BLACK

FASTENING METHOD SHOE LACE

SOLE MATERIAL DUAL DENSITY

SPECIAL FEATURES STEEL MIDSOLE

PACKAGE TYPE BOX

PROTECTOR;MATAGUARD,ONE SIZE FITS ALL

PROTECTOR; TYPE MATAGUARD

DIMENSIONS ONE SIZE FITS ALL

MATERIAL POLYETHYLENE

TO FIT BOVA 20013, FRAM 4911, LEMAITRE MAXECO; S.A. PATT APP 86/7279



_________________________ ____________________________



APRON,IMPERMEABLE APRON, UTILITY; IMPERMEABLE

SPECIFICATION NUMBER CKS 319/LATEST

BIB/BRACE PVC COATED COTTON

BASE FABRIC TO TYPE 16 OF CKS 319-1972

COATED ONE SIDE ONLY

COATING: VIRGIN PVC POLYMER WITH HIGH GRADE COATING QUALITY, NO LESS THAN 70 "K" VALUE POLYMERS

NO FILLERS OR EXTENDERS AND A MASS OF 500 G/SQ M

TO BE OIL AND ACID RESISTANT

MAKE UP: SIZE 112 CM LONG X 84 CM WIDE AND 28 CM MIN AT TOP OF BIB

FOUR EYELETS, EACH INSERTED ON A STITCHED ON REINFORCED PATCH

10 CM SQUARE OR ROUNDED OF SELF MATERIAL SHALL BE FITTED AS FOLLOWS: TWO AT THE TOP OF THE BIB AND TWO APPROX. AT WAIST HEIGHT. FOUR STRAPS, 70 CM LONG



_________________________ ____________________________



APRON,BLACKSMITH, WAIST LENGTH APRON, BLACKSMITH'S

SPECIFICATION NUMBER CME 72/LATEST, PART 6

LEATHER WAIST TYPE APRON

TO BE SUPPLIED WITH 2 LEATHER STRAPS AND BRASS EYELETS

APRON WELDER;ARC WELD,WD 600 X LG 900 MM

APRON, WELDER

TYPE ARC WELDING

GARMENT SIZE WD 600 X LG 900 MM

MATERIAL CHROME LEATHER

COLOR GREY

THE APRON AND STRAPS ARE MANUFACTURED OF FULL CHROME TANNED SPLIT LEATHER OF 1.5 – 2MM SUBSTANCE

Nº 25 POLYFIL CORE SPUN THREAD 9.5 X 8/05000 STEEL BIFURCATED RIVETS ARE USED IN ATTACHING STRAPS

19MM NICKEL BUCKLES

THE APRON IS 120CM LONG AND 60CM WIDE



_________________________ ____________________________


IF THE APRON IS JOINED ALL STITCHING IS DONE WITH DOUBLE SEAMS AND THE SEAMS ARE STRENGTHENED WITH 4 STEEL BIFURCATED RIVETS, APPROXIMATELY 18CM APART


AN 80CM X 19MM WIDE WAIST NECK STRAP IS FIXED TO THE TOP OF THE BIB WITH A 19MM BUCKLE ON THE OPPOSITE SIDE

AN 80CM X 19MM WIDE WAIST STRAP IS FIXED TO SIDE OF APRON WITH A 19MM BUCKLE ON THE APPOSITE SIDE THE LEATHER

AND THREAD USED AS WELL AS THE WORKMANSHIP COMPLIES WITH THE REQUIREMENTS OF THE SABS SPECIFICATIONS FOR INDUSTRIAL LEATHER PROTECTIVE WEAR SANS 316 OF 2002

APRON,WELDER, SHOULDER TYPE APRON, WELDER'S; LEATHER

DRAWING NO: CME 72/LATEST PART 6 REV 0, UTH 1714/11-000/LATEST TYPE B REV 0

SHOULDER TYPE

BOTH PARTS TO BE JOINED TOGETHER ON ONE SIDE WITH 4 RIVETS AND ON THE OTHER WITH 4 PRESS STUDS

TO BE SUPPLIED WITH 2 LEATHER STRAPS AND 2 BRASS EYELETS



_________________________ ____________________________



APRON,WELDER, SPLIT TYPE APRON, WELDER'S; LEATHER

DRAWING NO: CME 72/LATEST PART 6 REV 0, UTH 1714/11-000/LATEST TYPE A REV 0

2 MM THICK SPLIT TYPE

TO BE SUPPLIED WITH 4 LEATHER STRAPS 25 MM WIDE X 600 MM LONG ON THE BIB AND 6 BRASS EYELETS

5 LEATHER STRAPS 25 MM WIDE X 600 MM LONG RIVITED TO EACH LEG

APRON WLDRS;BIB AND BRACE,GRAY APRON, WELDER'S

TYPE BIB AND BRACE

SIZE WD 760 X LG 1220 X THK 2 MM


COLOR GRAY

EQUIPMENT USED; FOR WELDERS AND BLACKSMITHS

WITH TWO WAIST STRAPS AND ONE NECK STRAP



_________________________ ____________________________



SPATS,SAFETY SPATS; SAFETY

SPECIFICATION NUMBER SABS 316 FIGURE 14 TYPE N

SIZE: MEDUIM; WITH ANKLETS

CHROME-TANNED FLESH-SPLIT LEATHER

MINIMUM THICKNESS OF 2.0 MM

TO BE SUPPLIED IN PAIRS

SPATS;WELD,LONG SPATS; TYPE WELDING

COMMERCIAL SIZE LONG

MATERIAL CHROME-TANNED FLESH-SPLIT LEATHER

THE LEG GUARD, STRAPS AND RE-ENFORCED TOE CAP IS MANUFACTURED OF FULL CHROME TANNED LEATHER OF FLESH SPLIT OF NOT LESS THAN 2MM SUBSTANCE

Nº 25 POLYFIL CORE SPUN THREAD 9.5 X 8/05000 STEEL BIFURCATED RIVETS

19MM NICKEL BUCKLES

7050 NICKEL PRESS STUDS



_________________________ ____________________________


THE LEG GUARD COVERS THE FOOT AND REACHES TO APPROXIMATELY 10CM BELOW THE KNEE


SPATS;WELD,LONG ON EACH SIDE OF THE LEG A LEATHER POUCH

OF 35MM WIDE AND 315MM LONG IS ATTACHED FOR THE INSERTION OF A MEAL OR HARD PLASTIC STRIP TO SUPPORT THE LEATHER

THE LEG GUARD IS CLOSED AROUND THE LEG WITH THREE 19MM STRAPS AND BUCKLES, AS WELL AS A STRAP AND BUCKLE UNDER THE ARCH OF THE FOOT

EACH STRAP IS ATTACHED TO THE LEG GUARD BY MEANS OF TWO FEMALE PRESS STUDS ON

EACH STRAP THAT CLIPS ONTO ANY OF THE THREE MALE PRESS STUDS ON THE LEG GUARD

A PRESS STUD IS PLACED ON THE INSIDE OF THE LEG GUARD TO CLOSE THE LEATHER FLAP

A STITCHED DOWN RE-ENFORCED TOE CAP IS INCORPORATED ON THE INSIDE OF THE TOE PIECE

LENGTH FROM TOP TO BOTTOM AT THE ANKLE 42CM

FROM ANKLE TO TOP OF TOE PIECE 35CM

THE LEG GUARD CONFORMS TO THE REQUIREMENTS OF THE SABS FOR INDUSTRIAL HAND PROTECTORS AND LEATHER PROTECTIVE CLOTHING SANS 316 OF 2002.



_________________________ ____________________________



GLOVE;SAFETY,L,LG 30 CM,CHROME LEATHER,LH & RH

GLOVE; TYPE SAFETY

SIZE LARGE

LENGTH 30 CM


SPECIFICATION: SABS 316/LATEST

GAUNTLET 1.5MM THICK

UNLINED

PALM AND FINGERS FULL GRAIN WITH BACK

HAND AND CUFF SPLIT

SPEC SABS 316 FIGURE 1(A) MARKING: IN ADDITION TO CLAUSE 7.2.1 AND 7.2.2 OF SABS 316 THE ITEM NUMBER 35/201031 ARE REQUIRED

GLOVES UTILITY;PROTECTIVE,LEATHER,NAPPA

GLOVES, UTILITY; TYPE PROTECTIVE

COMMERCIAL SIZE OVERALL LENGTH 30CM X LENGTH OF CUFF 10CM

MATERIAL LEATHER

SPECIAL FEATURES NAPPA; FULL CHROME TANNED LEATHER OF FLESH SPLIT AND FULL CHROMED TANNED GRAIN LEATHER



_________________________ ____________________________


SUBSTANCE 1.3MM TO 1.5MM,Nº 25 POLYFIL CORE SPUN THREAD


GLOVES UTILITY;PROTECTIVE,LEATHER,NAPPA

THE GLOVE IS MANUFACTURED FROM CHROME TANNED LEATHER ON THE PALM,FINGERS AND THUMB AND CHROME TANNED SPLIT LEATHER ON THE BACK OF THE GLOVE THE CUFF AND THE REINFORCE

THE GLOVE HAS A SPILT GRAIN REINFORCE ON THE INSIDE OF THE PALM AND THUMB

TO SEAM BETWEEN PALM AND MIDDLE AND RING FINGER IS WELTED

FROM TIP OF MIDDLE FINGER TO SEAM BETWEEN HAND PORTION AND CUFF 20CM.

ALONG SEAM BETWEEN HAND PORTION AND CUFF ACROSS NARROWEST PART OF CUFF 14CM

ACROSS PALM AT CROTCH OF THUMB 13CM FROM TIP OF INDEX FINGER TO CROTCH BETWEEN THUMB AND INDEX FINGER 14CM

FROM TIP OF THUMB TO CROTCH OF THUMB 9CM

ALL MATERIALS USED AS WELL AS THE WORKMANSHIP COMPLIES WITH THE REQUIREMENTS OF THE SABS FOR INDUSTRIAL LEATHER PROTECTIVE WEAR SANS 316 OF 2002.PGS 6510SABS


GLOVE; TYPE SAFETY

SIZE MEDIUM, LENGTH 30 CM





_________________________ ____________________________


GAUNTLET 1.5MM THICK UNLINED



PALM AND FINGERS FULL GRAIN WITH BACK HAND AND CUFF SPLIT

FIGURE 1(A) MARKING: IN ADDITION TO CLAUSE 7.2.1 AND 7.2.2 OF SABS 316. THE ITEM NUMBER 35/201043 ARE REQUIRED

GLOVE;SAFETY,L,LG 40 CM,CHROME LEATHER, LH

GLOVE; TYPE SAFETY

SIZE LARGE, LENGTH 40 CM



GAUNTLET 1.5MM THICK

PARTLY LINED WITH COTTON CLOTH

FIGURE 1 (B) MARKING: IN ADDITION TO CLAUSE 7.2.1 AND 7.2.2 OF SABS 316 THE ITEM NUMBER 35/201119 ARE REQUIRED

GLOVES WELDER'S;HEAT RESISTANT,SHORT GLOVES, WELDER'S; TYPE HEAT RESISTANT

COLOR GREEN LINED

CUFF TYPE SHORT

MATERIAL LEATHER

COMMERCIAL SIZE 10.5 MM

LENGTH ONE SIZE FITS ALL



_________________________ ____________________________


WELDMASTER; YELLOW EDGE ON REAR OF CUFF


GLOVES,RUBBER,AUTOPSY GLOVES, SURGEONS'; EQUIPMENT

APPROVED ITEM NAME GLOVES,RUBBER,AUTOPSY EQUIPMENT

USED ON FOR USE WHEN SPRAYING WITH AND HANDLING EPOXY TAR

STORES DESCRIPTION SIZE 9 (AUTOPSY GLOVE)

NATURAL RUBBER-SOLUTION-DIPPED WITH ROLLED WRIST AND SMOOTH FINISH

GLOVE,RUBBER,CHEMICAL PROTECTIVE GLOVES,RUBBER, CHEMICAL PROTECTIVE

SPECIFICATION NUMBER SABS 416/LATEST

TYPE 2

NATURAL RUBBER UNREINFORCED

CHEMICAL RESISTANT

WRIST LENGTH, WITH OVERALL LENGTH OF GLOVE 270 MM

MARKING: IN ADDITION TO CLAUSE 4.2.1 AND 4.2.2 OF SABS 416

GLOVES UTLTY;SAFETY MALE GLOVES, UTILITY; TYPE SAFETY MALE

MATERIAL ACRYLIC 50, COTTON 50 PCT

CLEAN GRIP OR EQUAL

POLYVINYL CHLORIDE DOTTED COATING NO SEAMS



_________________________ ____________________________


CLOSELY KNITTED SHELL REVERSIBLE AND LAUNDERABLE


GLOVES UTLTY;SAFETY,GOAT SKIN GLOVES, UTILITY; TYPE SAFETY

MATERIAL GOAT SKIN

GENDER UNISEX

FEATURES THERMAL WINTER

GLOVES UTLTY;SAFETY,GOAT SKIN GLOVES, UTILITY; TYPE SAFETY

MATERIAL GOAT SKIN

GENDER UNISEX

FEATURES THERMAL SUMMER

GLOVES UTLTY;SAFETY, PIGSKIN,UNISEX GLOVES, UTILITY; TYPE SAFETY

MATERIAL PIGSKIN

GENDER UNISEX

GLOVES UTLTY;SAFETY, CHROME LEATHER GLOVES, UTILITY; TYPE SAFETY


COLOR LIGHT GRAY

GENDER UNISEX



_________________________ ____________________________


FEATURES REINFORCED DOUBLE PALM AND COTTON BACK


GLOVES UTILITY;SAFETY,ONE SIZE FITS ALL

GLOVES, UTILITY; TYPE SAFETY


MATERIAL PIGSKIN

SPECIAL FEATURES CANDY STRIPED BACKING

SPLIT PIG-SKIN LEATHER ON PALM AND FINGERS

REINFORCED KNUCKLE PROTECTOR AND FINGER TIPS

EN388 CAT 1 STANDARDS

GLOVES UTLTY;SAFETY, POLYMIDE GLOVES, UTILITY SAFETY

MATERIAL POLYMIDE

COLOUR DARK GRAY

GENDER UNISEX

NITRILE COATING

CURVED FINGERS AND CONTOURED PALM

ELASTIC KNITTED WRIST



_________________________ ____________________________



GLOVES UTLTY;SAFETY, NITRILE,YELLOW GLOVES, UTILITY; TYPE SAFETY

MATERIAL NITRILE

COLOR YELLOW

GENDER UNISEX

FEATURES 200 CUFF MM

GLOVES UTLTY;SAFETY, PVC,GREEN GLOVES, UTILITY; TYPE SAFETY


COLOR GREEN

GENDER UNISEX

FEATURES 200 CUFF MM

MITTENS HEAT PRTCTV;REVERSABLE MITTENS, HEAT PROTECTIVE; TYPE REVERSABLE


FEATURES REINFORCED UNLINED



_________________________ ____________________________



GLOVE SET CHMCL PRTCTV;WRIST LENGTH,PVC

GLOVE SET, CHEMICAL PROTECTIVE; TYPE

SIZE ONE SIZE FITS ALL


STANDARD: SABS 416/LATEST. TYPE1

FABRIC-REINFORCED, KNITTED CUFF

35MM OF CUFF TO REMAIN UNCOATED

MARKING IN ADDITION TO CLAUSE 4.2.1 & 4.2.2 OF SABS 416

MITTENS HEAT PRTCTV;HAND GUARD(PAD) MITTENS, HEAT PROTECTIVE; TYPE HAND GUARD (PAD)


FEATURES REINFORCED STAPLED

GLOVES WLDRS;HEAT RESISTANT,400 MM,RED

GLOVES, WELDERS'; TYPE HEAT RESISTANT

SIZE 400 MM


COLOR RED

STARNDARD: EN 407 LATEST PARTLY LINED WITHSTANDING TEMPERATURES OF 200 DEGREE C TO EN 407 LATEST



_________________________ ____________________________



GLOVES WELDER'S;SFTY,PINK/RED,LONG GLOVES, WELDER'S; TYPE SAFETY

COLOR PINK/RED

CUFF TYPE LONG


LENGTH 8 IN

PINK FIRE / HEAT RETARDANT CHROME SPLIT LEATHER

SUBSTANCE 1.3 – 1.6MM; WOVEN BLANKET MATERIAL

LINING Nº 25 POLYFIL CORE SPUN THREAD

THE GLOVE CONSISTS OF CHROME SPLIT LEATHER A FULL APRON PALM AND THUMB RE-ENFORCE IS STITCHED INTO THE SEAMS OF THE HAND PORTION

OVERALL LENGTH 40CM FROM TIP OF MIDDLE FINGER TO SEAM BETWEEN HAND PORTION AND CUFF

19.5CM ALONG SEAM BETWEEN HAND PORTION AND CUFF ACROSS NARROWEST PART OF CUFF

17CM ACROSS PALM AT CROTCH OF THUMB

15CM FROM TIP OF INDEX FINGER TO CROTCH BETWEEN THUMB AND INDEX FINGER



_________________________ ____________________________


13.5CM; FROM TIP OF THUMB TO CROTCH OF THUMB 8CM


GLOVES WELDER'S;SFTY,PINK/RED,LONG ALL LEATHER AND THREAD USED IN THE CONSTRUCTION OF THE GLOVE COMPLY WITH THE REQUIREMENTS OF THE SABS FOR INDUSTRIAL PROTECTIVE WEAR SANS 316 OF 2002

SHOULD EXCESSIVE HEAT BUILD UP TRANSPIRE, THE GLOVE COULD BE THROWN OFF WITH A JERKING MOTION; TYPE WELDING

FACESHIELD INDL;SOLID VISOR,PLSTC BAG FACESHIELD, INDUSTRIAL; TYPE SOLID VISOR

PACKAGE TYPE PLASTIC BAG

SPECIFICATION NUMBER; SANS 1404 / LATEST

WITH A CLEAR POLYCARBONATE VISOR

WITH A WIDTH OF A LEAST 350 MM AND LENGTH 250 MM X THICKNESS 3 MM

FACESHIELD INDL;SOLID VISOR,PLSTC BAG FACESHIELD, INDUSTRIAL; TYPE SOLID VISOR.


SPECIFICATION NUMBER; SANS 1404 / LATEST

GREEN POLYCARBONET VISOR



_________________________ ____________________________


WIDTH 350 MM X LENGTH 250 MM X THICKNESS 3 MM


GOGGLES INDL;CHEMICAL RESISTANT,ACETATE

GOGGLES, INDUSTRIAL; TYPE CHEMICAL RESISTANT

LENS MATERIAL ACETATE

LENS COLOR CLEAR

FEATURES ANTI-FOG


SPLASH IMPACK RESISTANT

INDIRECT VENT

GOGGLES INDL;DUST PROTECTION,PLSTC,CLEAR

GOGGLES, INDUSTRIAL; TYPE DUST PROTECTION

LENS MATERIAL PLASTIC

LENS COLOR CLEAR

FEATURES ANTI FOG; DUST


LOW PROFILE GOGGLE WITH FOAM

INSERT AND INDIRECT VENTING



_________________________ ____________________________


ESPECIALLY DESIGNED FOR AREAS WITH DUST; STRONG, COMFORTABLE HEADBAND

Item - Short Description Compliance aspects Compliance response

Explanation / Deviation / Reason

GOGGLES,INDUSTRIAL GOGGLES, INDUSTRIAL,WELDING

SPECIFICATION NUMBER SABS

1404/LATEST

OVERALL THE FRAME TO BE OF A PLASTICS MATERIAL

VENTILATION OPENINGS TO BE TO CLAUSE 3.3.3.(C) OF SPEC

LENS HOLDERS TO BE OF THE INDEPENDENT SC

LENS,GOGGLE,INDUSTRIAL LENS, GOGGELS, INDUSTRIAL

SPECIFICATION NUMBERSABS1404 PART 11/LATEST

INDUSTRIAL SHADED LENS FOR CHIPPING GOGGLE

50MM DIA X 2.8MM THICK

SHADE NO 2 TOUGHENED GLASS



_________________________ ____________________________


GOGGLES INDL;BRAZING AND CUTTING,GREY

GOGGLES, INDUSTRIAL; TYPE BRAZING AND CUTTING

LENS MATERIAL POLYCARBONATE

LENS COLOR GREY

FEATURES ANTI FOG LENS AND UV PROTECTION




HORIZONTAL & VERTICAL ADJUSTABLE TEMPLES

INTERGRATED SIDE SHIELD

EXTENDED CHEEK & BROW PROTECTION

TO SUPPLY WITH LANYARD ITEM 3520366; (SANS 1404-1993)EN 166

SPECTACLE SAFETY SPECTACLE, SAFETY

SIDE ARMS HORIZONTAKLLY ADJUSTABLE

ADJUSTABLE TEMPLES WITH SOFT PAD

100% POLYCARBONATE LENS IS UV380

ANTI SCRATCH AND ANTI FOG DIAMOND COATED LENSES

STANDARDS EN166 AND ANSI Z87.1



_________________________ ____________________________





LENS COLOR GREY



HORIZONTAL & VERTICAL ADJUSTABLE TEMPLES



INTERGRATED SIDE SHIELD

EXTENDED CHEEK & BROW PROTECTION

TO FIT OVER PRECRIPTION SPECTICALS

TO SUPPLY WITH LANYARD ITEM 35203600; (SANS 1404-1993)EN 166



_________________________ ____________________________


GOGGLES INDL;BRAZING AND CUTTING,CLEAR



LENS COLOR CLEAR

FEATURES ANTI FOG LENS AND UV

PROTECTION


HORIZONTAL AND VERTICAL ADJUSTABLE TEMPLES

INTERGRATED SIDE SHIELDS

EXTENDED CHEEK AND BROW PROTECTION

SUPPLIED WITH LANYARD ITEM 35203600; (SANS 1404-1993)EN 166



_________________________ ____________________________



GOGGLES INDL;BRAZING AND CUTTING,CLEAR



LENS COLOR CLEAR



HORIZONTAL AND VERTICAL ADJUSTABLE TEMPLES

INTERGRATED SIDE SHIELDS

EXTENDED CHEEK AND BROW PROTECTION

SUPPLIED WITH LANYARD ITEM 35203600

TO BE WORN OVER OWN SPECTICALS; (SANS 1404-1993)EN 166

SPECTACLE SAFETY;GRANGE,CLEAR SPECTACLE, SAFETY; TYPE GRANGE

LENS COLOR CLEAR

OCULAR MATERIAL POLYCARBONATE

FRAME MATERIAL NYLON

IN CONFORMITY WITH THE STANDARDS EN166:2001, EN170:2002 AND EN172:2001



_________________________ ____________________________



SPECTACLE SAFETY;SUPREME,CLEAR SPECTACLE, SAFETY; TYPE SUPREME

LENS COLOR CLEAR

SIDE ARMS HORIZONTALLY ADJUSTABLE

ADJUSTABLE TEMPLES WITH SOFT PAD

100% POLYCARBONATE LENS IS UV380

ANTI SCRATCH AND ANTI FOG DIAMOND COATED LENSES

STANDARDS EN166 AND ANSI Z87.1

LANYARD;SPECTICAL,LG 600 MM,LOOP CORD

LANYARD; TYPE SPECTICAL

MATERIAL NYLON/POLYESTOR/NOEPRENE

LENGTH 600 MM

CONNECTION LOOP CORD

FLASHLIGHT;HEADLAMP,CLIP ON,BLACK,3 V FLASHLIGHT; TYPE HEADLAMP

FEATURES CLIP ON

COLOR BLACK

BATTERY TYPE AND QUANTITY 2 LITHUIM COIN SELL VOLTAGE RATING 3 V



_________________________ ____________________________



FLASHLIGHT;HEADLAMP,CLIP ON,BLACK,3 V LAMP TYPE LED

WITHSTAND EXTREME CONDITIONS

ULTRA BRIGHT WHITE LIGHT TO LAST +/- 48 HOURS

5 LED BULPS WITH 10000 + HOURS BURN TIME EACH

HOOD ABRSV CLNNG;SANDBLASTING,BLUE/GREY

HOOD, ABRASIVE CLEANING; TYPE SANDBLASTING

MATERIAL RUBBER/PLASTIC/BRASS/STEEL

COLOR BLUE/GREY

EQUIPMENT USED ON SANDBLASTING,

GRITBLASTING TO CONSIST OF A FIBERGLASS SHELL WITH INTEGRATED AIR CHANNEL FOR FREE AIR FLOW ACROSS TOP OF SHELL AND OVER WINDOW

FITTED WITH ADJUSTABLE NYLON HEADGEAR AND COVERED WITH A ONE-PIECE MOULDED RUBBER HOOD EXTENDING BELOW THE BELT

FITTED WITH A HINGED WINDOW CONSISTING OF A PEXIGLASS LENS AND A BRASS MESH COVERLENS,WITH EASILY REMOVABLE FASTENINGS FOR EASY LENS REPLACEMENT

AND/OR CLEANING

ADJUSTABLE AIR FLOW VALVE IS TO BE MOUNTED ON A LEATHER BELT AT LEAST 38 MM WIDE AND FITTED WITH A QUICK RELEASE AIR COUPLING



_________________________ ____________________________



HOOD;BEE VEIL,NETTING MATERIAL HOOD; TYPE BEE VEIL

SIZE TO FIT OVER ANY STANDARD HELMET OR HAT

MATERIAL NETTING MATERIAL

HELMET SFTY;V- GARD PEAK,WHITE,PLSTC HELMET, SAFETY; TYPE V- GARD PEAK

SIZE HEIGHT AND CIRCUMFERENCE ADJUSTABLE TO SIZE

COLOR WHITE

MATERIAL PLASTIC

FEATURES SNUGFIT SUSPENTION LINER

SPECIFICATION NUMBER; S.A.B.S. 1397 TYPE A

HELMET SFTY;V-GARD BRIM,WHITE,PLSTC

HELMET, SAFETY; TYPE V-GARD BRIM

SIZE HEIGHT AND CIRCUMFERENCE ADJUSTABLE TO SIZE

COLOR WHITE

MATERIAL PLASTIC

FEATURES SNUGFIT SUSPENTION LINER

SPECIFICATION NUMBER; S.A.B.S. 1397 TYPE A



_________________________ ____________________________



PROTECTOR;SUN,FABRIC,HARD HAT PROTECTOR; TYPE SUN

MATERIAL FABRIC

LIME AND YELLOW IN COLOR

USED ON NIKKI HARD HATS

HELMET SFTY;NIKKI OR EQUIVALENT ,50-64 CM,WHITE

HELMET, SAFETY; TYPE NIKKI

SIZE 50-64 CM

COLOR WHITE

MATERIAL ABS PLASTIC LIGHTWEIGHT


SPECIFICATION: SANS 1397:2003; EN:1995

RIGIDTY AND PROTECTION

CONTOURED RAIN CHANNEL

HIGH DIELECTRIC STRENGHT / ELECTRICAL

INSULATION

ONE HANDED RATCHET ADJUSTABLE SHOCK ABSORBING SUSPENTION

4 POINT LIGHTWEIGHT LINING WITH SOFT ABSORBANT CROWN AND SWEATBAND



_________________________ ____________________________


ADVANCED PERMASWEAT BREATHABLE SWEATBAND EASILY REPLACEABLE AND WASHABLE


HELMET SFTY;NIKKI OR EQUIVALENT ,50-64 CM,WHITE

SLOTS FOR EARMUFFS AND VISORS. ULTRA-VIOLET INHIBITOR PROTECTING THE LIFE OF THE HELMET

REINFORCED FOR EXTRASHELL STRENGHT

HEIGHT AND CIRCUMFERENCE ADJUSTABLE

SANS 1397:2003 AND EN 397:1995

HELMET SAFETY;HARD HAT,ONE SIZE FITS ALL

HELMET, SAFETY; TYPE HARD HAT


COLOR BLUE

MATERIAL PLASTIC

HARD HAT DESIGN: NIKKI: WITH CHIN STRAPS

HELMET SAFETY;NIKKI,STD,ORANGE,PLASTIC

HELMET, SAFETY; TYPE NIKKI

COMMERCIAL SIZE STANDARD

COLOR ORANGE MATERIAL PLASTIC; WITH CHIN STRAPS



_________________________ ____________________________



HELMET WLDRS;AUTO DARK,THERMOPLASTIC

HELMET, WELDER'S; TYPE AUTO DARK

MATERIAL THERMOPLASTIC

COLOR BLACK


FEATURES LOCKING RATCHET ADJUSTMENT FOR HEADGEAR

FIXED FRONT

HEIGHT ADJUSTMENT ON CROWN FOR INDIVIDUAL FIT & COMFORT

ADJUSTING SIDE TILT NUTS ALLOW FOR MULTIPLE ADJUSTMENT PRESSURE

HELMET SFTY;HARD HAT,ONE SIZE FITS ALL

HELMET, SAFETY; TYPE HARD HAT


COLOR ORANGE

MATERIAL HIGH DENSITY POLYETHYLENE

FEATURES COMPLETE WITH VISOR AND EARMUFF BRACKET

PACKAGE TYPE BOX

SUPPLY WITH FLEXABLE PLASTIC MATERIAL ARM, SYNTHETIC FOAM EAR PROTECTION MUFFS AND ALUMINIUM GAUSE VISOR FOR HORTICULTURE USE



_________________________ ____________________________


HEIGHT AND CIRCUMFERENCE ADJUSTABLE TO SIZE


STRAP,CHIN,HELMET STRAP, CHIN, HELMET

4 POINT WEBBING CHINSTAP NIK/04C

VELCRO FASTNING

RED OR ORANGE

CHINCUP OPSIONAL EXTRA

STRAP CHIN;ELASTICISED,NYLN STRAP, CHIN; TYPE ELASTICISED

MATERIAL NYLON

DIMENSIONS WD 1.9 X LG 40 CM

SPECIAL FEATURES TWO PLASTIC/POLYTHENE LOCATING HOOKS

STANDARD: SABS142 TYPE EB 18

ADJUSTABLE WITH NON SLIP BUCKLE & TWO PLASTI/POLYTHENE LOCATING HOOKS

ONE STITCHED TO ONE END AND OTHER HOOK IN

SABS 142 TYPE EB 18



_________________________ ____________________________



MASK AIR FILTRNG; DISPOSABLE WITH VALVE

MASK, AIR FILTERING; TYPE DISPOSABLE WITH VALVE

MEDIA FOR WHICH DESIGNED DUST

FASTENING METHOD TWO ELASTIC HEAD BANDS

MASK MATERIAL POLYURETHAINE FOAM

SIZE ONE SIZE FIT ALL

FILTER MATERIAL POLYURETHAINE FOAM

PACKAGE TYPE BOX OF 15

SPECIFICATION EN 149 / LATEST FFP2S

FOLDABLE

RESPIRATOR AIR FILTR;WELDING RESPIRATOR, AIR FILTERING; TYPE WELDING

MEDIA FOR WHICH DESIGNED WELDING FUMES

FILTER MATERIAL POLYISOPRENE/COTTON FIBRE


SPECIFICATION: EN 149:2001

STANDARD: FFP 2 CATALOGUE: DISPOSIBLE



_________________________ ____________________________



RESPIRATOR AIR FILTR;WELDING HALF MASK WITH FACE SEAL GASKET

ALUMINIUM NOSE CLIP

RESPIRATOR AIR FILTERING;WELD,PP RESPIRATOR, AIR FILTERING; TYPE WELDING

MEDIA FOR WHICH DESIGNED RESPIRATORY PROTECTION

FILTER MATERIAL POLYPROPYLENE


STANDARD: FFP 3

FOR USE ALSO WITH ASBESTOS AND LEAD

MASK RESPRTR;FULL FACE,SILICON MASK, RESPIRATOR; TYPE FULL FACE

DESIGN TYPE AIR/DUST FILTERING


MASK MATERIAL THERMOPLASTIC RUBBER

TUBE MATERIAL SILICON



_________________________ ____________________________



CARTRIDGE RESPRTR AIR FILTRNG;FULL MASK

CARTRIDGE, RESPIRATOR, AIR FILTERING; TYPE FULL MASK

MEDIA FOR WHICH DESIGNED ORGANIC VAPOUR

DESIGN ROUND

COLOUR CODE ORANGE/WHITE

STANDARD: EN 141 CLASS A2

FILTER TYPE 3 AND OF ACTIVATED CARBON GAS FILTER

WEIGHT 300GRAM

FLOW RESISTANCE<2.2M/BAR@301/MIIN

PEPERSRAY INCLUDED

FILTER COMBINATION A2P3

MASK AIR FILTRNG; DISPOSABLE MASK, AIR FILTERING; TYPE DISPOSABLE

MEDIA FOR WHICH DESIGNED ELECTROSTATICALLY CHARGED FILTER

FASTENING METHOD TWO ELASTIC HEAD

BANDS

MASK MATERIAL FILTERING FIBRE

SIZE ONE SIZE FIT ALL



_________________________ ____________________________


FILTER MATERIAL PARTICULATES


MASK AIR FILTRNG; DISPOSABLE PACKAGE TYPE BOX OF 20

STANDARD ( FF 2 )

FOR PROTECTION AGAINST SILICA AND ASBESTOS DUST

THE WIDTH OF THE HARNESS STRAPS TO BE AT LEAST 8 MM

TO QUOTED PART NUMBER OR EQUAL

MASK AIR FILTERING;DISPOSABLE,DUST MASK, AIR FILTERING; TYPE DISPOSABLE

MEDIA FOR WHICH DESIGNED DUST

COMMERCIAL SIZE ONE SIZE FIT ALL

SPECIAL FEATURES HALF MASK WITH VALVE

STANDARD FFP2

BOX OF 10



_________________________ ____________________________


PADS KNEE INDL;PROTECTOR,1 PIECE,PVC PADS, KNEE, INDUSTRIAL; TYPE PROTECTOR

DESIGN TYPE 1 PIECE

DIMENSIONS LG 230 X WHT 250 MM


COLOR ORANGE


PADS KNEE INDL;PROTECTOR,1 PIECE,PVC ATTACHMENT METHOD ADJUSTABLE ELASTIGATED STRAP

SPECIAL FEATURES LEFT/RIGHT

KNEE, PRE-FORMED PLASTIC

SWIWEL TYPE

OVERALL LENGTH 230 MM

CURVED WIDTH 250 MM BOTTOM PARTS COMPLETE WITH RUBBER FOAM INSERT ATTACHED TO LEG



_________________________ ____________________________


PADS KNEE INDL;HVY DTY,BLACK,MOULDED PADS, KNEE, INDUSTRIAL; TYPE HEAVY DUTY

DIMENSIONS WD 135 X LG 155 MM

MATERIAL POLYVINYL CHLORIDE AND EVA RUBBER

COLOR BLACK

ATTACHMENT METHOD ADJUSTABLE ELASTICATED STRAP

SPECIAL FEATURES MOULDED

COVERALLS WADRS;BIB AND BRACE,PVC COVERALLS, WADERS'; STYLE BIB AND BRACE

COLOR HIGH VISIBILITY YELLOW

BOOT MATERIAL POLYVINYL CHLORIDE


COVERALLS WADRS;BIB AND BRACE,PVC GARMENT MATERIAL POLYVINYL CHLORIDE 79PCT/POLYESTER BASE CLOTH 21PCT

CLOTH WEIGHT 400 G/M2

GENDER UNISEX

DESIGN TYPE WEBBING BRACES 38 MM

HIGH FREQUENCY WELDED SEAMS AND RE-ENFORCED INLEG

BOOTS STITCHED AND HIGH FREQUENCY WELDED



_________________________ ____________________________


38 MM QUICK RELEASE BUCKLES ATTACHED TO WEBBING

VEST HI VISB;REFLCTV,YELLOW,POLYSTR VEST, HIGH VISIBILITY; TYPE REFLECTIVE

STYLE WAIST COAT (EN4, CLASS 2)

GARMENT, COLOR YELLOW

MATERIAL POLYESTER

FEATURES TRANSNET LOGO

CLOSURE TYPE FASTENER,SLIDE


SPECIFICATION: EN471 & SANS 50471

50 MM REFLECTIVE STRIPS


VEST HI VISB;REFLCTV,YELLOW,POLYSTR AROUND WAIST AND OVER BOTH SHOULDERS

INDUSTRIAL; 60 WASHES AT 60 DEGREES

TRANSPARENT ID POUCH

AIRTEX SOLID 125 G

BIB REFLCTV;STANDARD,LIME,STRAP,MOTO RH &

BIB, REFLECTIVE; GARMENT SIZE STANDARD



_________________________ ____________________________


BIB REFLCTV;STANDARD,LIME,STRAP,TAIT RH & BIB REFLCTV;STANDARD,LIME,STRAP,ICON RH

COLOR LIME

MATERIAL 300 DENURE POLYURETHANE COATED NON-BREATHABLE

GARMENT CLOSING METHOD STRAP

WALKIE TALKIE POUCH, MOTOROLO CP160

SIZE: WD 275 MM X HT 370 MM, POUCH SIZE: WD 55 MM BOTTON X WD 60 MM TOP X LG 130 MM X DP 45 MM

ADJUSTABLE STRAPS WD 50 MM WITH QUICK RELEASE PLASTIC CLASPS

MATERIAL TO EN471 AND SANS 50471 CLASS 3

50 M LIME AND SILVER REFLECTIVE TAPE TO EN 471 AND SANS 50471 CLASS 2


TRANSNET LOGO

PACKED IN PLASTIC ENVELOPE



_________________________ ____________________________



VEST HIGH VISIBILITY;REFLCTV,LIME VEST, HIGH VISIBILITY; TYPE REFLECTIVE

STYLE FISH NET

COLOR LIME

MATERIAL POLYESTER

SPECIAL FEATURES VENTILATED

CLOSURE TYPE YKK ZIP

50MM REFLECTOR TAPE AROUND WAIST AND OVER BOTH SHOULDERS

WASHABLE

WITH ID POUCH

MESH FRONT AND BACK

VEST HI VISB;REFLCTV,YELLOW,POLYSTR VEST, HIGH VISIBILITY; TYPE REFLECTIVE

STYLE WAIST COAT (EN4, CLASS 2)

COLOR YELLOW

MATERIAL POLYESTER

FEATURES TRANSNET FREIGHT RAIL LOGO



_________________________ ____________________________


CLOSURE TYPE FASTENER, SLIDE


VEST HI VISB;REFLCTV,YELLOW,POLYSTR PACKAGE TYPE PLASTIC ENVELOPE

SPECIFICATION: EN 471 & SANS50471

50 MM REFLECTIVE STRIPS; AROUND WAIST AND OVER BOTH SHOULDERS

INDUSTRIAL; 60 WASHES AT 60 DEGREES


TWO PATCH POCKETS WITH MITRE FLAPS BELOW VERTICAL REFLECTIVE TAPE ON FRONT OF VEST

AIRTEX SOLID 125 G

PAD;SHOULDER,THK 25 MM,CLOSE CELL FOAM

PAD; TYPE SHOULDER

DIMENSIONS THK 25 MM

MATERIAL CLOSE CELL FOAM

APPLICATION PROTECTION

3 POINT ADJUSTMENT

CONDORA OUTER SHELL, SOFT INNER LINER



_________________________ ____________________________


INTERCHANGEABLE ON SHOULDERS; PROTECTION


BELT SFTY INDL;KIDNEY,BELT MTRL ELASTIC

BELT, SAFETY, INDUSTRIAL

TYPE KIDNEY

BELT MATERIAL ELASTIC

FINISH BLACK

SPECIAL FEATURES VELCRO FASTNING

PACKAGE TYPE BAG PLASTIC

SIZE VARIOUS ADJUSTABLE



_________________________ ____________________________


TROUSERS UTLTY;ACID RESIST,UNISEX TROUSERS, UTILITY

TYPE ACID RESISTANT

GENDER UNISEX

COLOR WHITE

CLOTH NAME COTTONDRILL

CLOSING METHOD BUTTON

POCKET TYPE TWO SLANTING SIDE/ONE HIP

TROUSERS POCKET QUANTITY 3

FEATURES WITH REFELECTIVE STRIPS

SPECIFICATION SABS 434




_________________________ ____________________________



JACKET UTLTY;ACID RESIST,UNISEX JACKET, UTILITY

TYPE ACID RESISTANT

GENDER UNISEX

COLOR WHITE

JACKET MATERIAL COTTON DRILL

FEATURES WITH REFLECTIVE STRIPS

PACKAGE TYPE PLASTRIC BAG

TRANSNET LOGO ON FRONT POCKET AND BACK

OF JACKET

JACKET WET WTHR;2 PIECE WET SUIT,NYLN

JACKET, WET WEATHER

TYPE 2 PIECE WET SUIT

MATERIAL NYLON

GARMENT STYLE UNISEX

COLOR NAVY

FEATURES 50 MM REFLECTIVE STRIPS ON BACK/CHEST AND ARMS

TRANSNET LOGO ON BACK AND FRONT



_________________________ ____________________________




JACKET WET WTHR;2 PIECE WET SUIT,NYLN

PACK AWAY ADJUSTABLE HOOD

ADJUSTABLE CUFFS

SLIDE FASTENER AND STORM FLAP

WELDED SEAMS

TROUSERS WET WTHR;2 PIECE WET SUIT TROUSERS, WET WEATHER

TYPE 2 PIECE WET SUIT

GARMENT STYLE UNISEX

MATERIAL NYLON

COLOR NAVY

FEATURES WITH REFLECTIVE STRIPS AROUND LEGS


ELASTICATED WAIST AND DRAW CORD

ADJUSTABLE BOOT ENTRY

WELDED SEAMS



_________________________ ____________________________



SUIT WET WTHR ,2 PIECE,NAVY SUIT, WET WEATHER; GARMENT

DESIGN TYPE TWO PIECE

COLOR NAVY

MATERIAL OXFORD NYLON 200G

GENDER UNISEX

CLOSURE METHOD DOUBLE OPEN END SLIDE FASTENER WITH DOUBLE STORM FLAP & PRESS STUDS

FEATURES TRANSNET LOGO ON LEFT BREAST POCKET

CUFF TYPE ADJUSTABLE VELCRO, LEG BOTTOM TYPE ADJUSTABLE VELCRO

SPECIFICATION SANS 50471 AND EN 471

PACKAGE TYPE PVC DRAW STRING BAG

THERMAL, WATERPROOF

190G WADDING QUILTED LINING

SEALED SEAMS

JACKET WITH REMOVABLE HOOD WITH AJUSTABLE REFLECTIVE STRIP AND DRAW CORD

2 HIP & 1 BREAST POCKETS WITH VELCRO CLOSING



_________________________ ____________________________


STANDARD VISIBLE / REFLECTIVE TAPE ON JACKET AND TROUSERS

TROUSERS ELASTICSIZED WAIST WITH DRAW CORD


SUIT RAINWEAR; 2 PIECE,UNISEX SUIT, RAINWEAR; GARMENT SIZE 97 CM

DESIGN TYPE 2 PIECE

COLOR ORANGE DAYGLO

MATERIAL TAFFETA RUBBERIZED NYLON 100% 210 G

GENDER UNISEX

CLOSURE METHOD SLIDE FASTENER NYLON

(ZIP) 30 G

CUFF TYPE RAGLAN SLEEVE ELASTICATED; JACKET

HOOD WITH DRAW STRING

STORM FLAP UNDER ZIP

2 SIDE POCKETS WITH FLAP

50MM SILVER REFLECTIVE AROUND BOTH

ARMS AT ELBOW HEIGHT AND AROUND THE BODY AT THE SAME HEIGHT

DRAW CORD AT THE WAIST OF JACKET



_________________________ ____________________________


TROUSER; ELASTICATED WAIST COMPLETE WITH SIDE SLITS TO ACCESS UNDERGARMENT POCKETS, DOUBLE STITCHED IN-SEAM AND CROTCH

50MM SILVER REFLECTIVE AROUND THE KNEES

ALL SEAMS MUST BE PVC TAPED FOR WATER RESISTANCE


SUIT RAINWEAR,2 PIECE,ORANGE,UNISEX SUIT, RAINWEAR

DESIGN TYPE 2 PIECE

COLOR ORANGE

MATERIAL NYLON

GENDER UNISEX

RUBBERIZED; 50MM LIME SILVER REFLECTOR TAPE SEWN ON EACH OF THE JACKETS SLEEVES AND BOTH LEGS OF THE PANTS AS WELL AS ACROSS THE BACK AND FRONT OF THE JACKET

REFLECTIVE RUBBERIZED BAG INCLUDED



_________________________ ____________________________


HARNESS SFTY INDL;FULL BODY HARNESS, SAFETY, INDUSTRIAL

TYPE FULL BODY

DESIGN TYPE TRANSNET MPH5 ROPE ACCESS HARNESS

HARNESS MATERIAL WEBBING

SPECIAL FEATURES FLAME RETARDEND, ANTI STATIC, 22 KILO NEWTON COATED D-RINGS

PACKAGE TYPE EQUIPMENT BAG WITH SLIDE FASTNER

SPECIFICATION: EN 50354, 50355 & 362, SANS 50354, 50355 & 30361, , SANS 50358 & 50813



_________________________ ____________________________


Item - Short Description

Compliance aspects Compliance response Explanation / Deviation / Reason

HARNESS SFTY INDL;FULL BODY FRONT; 45MM YELLOW DOUBLE SIDED REFLECTIVE WEBBING, C/W PADDING ONSHOULDERS, WEBBING IS BAR TACKED ATTACHMENTS

STERNAL, VENTRAIL, LATERAL, COATED D-RING. PADDED LEGS & COATED BUCKLES

(NYLON)

BACK; ATTACHMENT DORSAL COATED D-RING PLUS PADDED SUPPORT

COATED BUCKLES FOR DORSAL ADJUSTMENT

D-RING ON BACK FOR SELF RESCUE EQUIPMENT

PADDED KIDNEY SUPPORT C/W GREEN REFLECTIVE WEBBING

STANDING STEP; GREEN REFLECTIVE WEBBING. PADDED LEG STRAPS.

TRAP BETWEEN HARNESS AND LANYARDS

45MM YELLOW DOUBLE SIDED REFECTIVE WEBBING

D-RING TO ATTACHED LANYARD

WAIST 60-101MM, WEIGHT 50-70KG, LENGTH 1.5-1.8M

HARNESS SAFETY IND;STD FULL BODY HARNESS, SAFETY INDUSTRIAL

TYPE STANDARD FULL BODY

MATERIAL CANVAS WEBBING



_________________________ ____________________________


ULTIMATE CROSS OVER PLUS SPIDER WEBB CROSS OVER PLUS FULL BODY


HARNESS SFTY INDL;FULL BODY COLOUR, BLUE

HARNESS COMPLETE WITH ADJUSTABLE PADDED LEGS WITH QUICK RELEASE BUCKLES

PADDED WAIST BELT COMPLETE WITH SIDE D-RINGS ADJUSTABLE SHOULDER STRAPS WITH RESCUE D-RINGS AND FLOATING BUCKLES

X - VEST PADDING

INDIVIDUAL SERIAL NUMBERING, TRACEABILITY ON ALL COMPONENTS

SPECIFICATIONS: EN 361: SANS 50361


LANYARD, SAFETY, INDUSTRIAL

TYPE WEBBING DOUBLE LANYARD

DIMENSIONS L X 1.75 M

MATERIAL TUBULAR WEBBING

HOOK MATERIAL ALUMINIUM

CONNECTION PYLON HOOK

COLOR OLIVE GREEN

SPECIFICATION: EN 50354, 50355, & 362



_________________________ ____________________________


T-PACK SHOCK ABSORBER



LANYARD TO BE ADJUSTABLE

24KILO NEWTON ALUMINIUM SCREW-GATE KARBINER

25 MILLIMETER TIBULAR WEBBING C/W COATED BUCKLES

LANYARD;DBL WEBBING,POLYESTER 100 PCT

LANYARD

TYPE DOUBLE WEBBING

MATERIAL POLYESTER 100 PCT

LENGTH 1650 M

SHOCK AND SCAFFOLD HOOKS PLUS QUICK LINK FALL ARREST

COLOUR YELLOW/LIME GREEN

WEBBING 35MM/45MM WIDE



_________________________ ____________________________


KIT;DESCELERATION DEVICE,RESCUE KIT; TYPE DESCELERATION DEVICE, APPLICATION RESCUE

SPECIAL FEATURES RETRACTABLE LANYARD

PACKAGE TYPE EQUIPMENT BAG WITH SLIDE FASTENER

SPECIFICATION: EN 360; CE 0123

6 METER NO WIRE DEVICE


KIT;DESCELERATION DEVICE,RESCUE COVER PLASTIC

WEB CABLE WD 18 MM NYLON

MAX WEIGHT 150 KG

BREAKING STRENGH 12 KILO NEWTON

KARABINER; OPENING 17 MM, MATERIAL STEEL

SWIVIL HOOK OPENING 19 MM, MATERIAL ALUMINIUM



_________________________ ____________________________


TESTING LAB SERIAL NU SRLW06-99A001

LANYARD;WORK POSITIONING,LG 2 M LANYARD

TYPE WORK POSITIONING

MATERIAL NYLON/POLYESTOR/NOEPRENE

LENGTH 2 M

CONNECTION KARABINER HOOKS

SPECIFICATION: EN 358


STRAP WEBNG;SLING,WD 50 MM,THK 2 MM STRAP, WEBBING

TYPE SLING

WIDTH 50 MM, THICKNESS 2 MM & LENGTH 2 M

MATERIAL NYLON

COLOR GREEN

LOAD RATING 39.2 KN

SPECIAL FEATURES ENDLESS

PACKAGE TYPE BAG, NYLON 2 PER KIT



_________________________ ____________________________




KIT; TYPE XCAPE, APPLICATION RESCUE

SPECIAL FEATURES SENTRIFUGAL FORCE BRAKE


SITUATED AT BACK OF HARNESS

KIT MUST INCLUDE SELF DESCENDER ROPE`S

15M ITEM 35205761

30M ITEM 35205773



100M ITEM 35205785

FLEXABLE ANCHOR LINES

15M ITEM 35205797

50M ITEM 35205801



_________________________ ____________________________


ROPE;SELF DESCENDER,NYLN ROPE

TYPE SELF DESCENDER

DIMENSIONS DIA 11 MM

MATERIAL NYLON

STRUCTURE KERMANTLE

STRENGTH 2200 KG

FOR USE ON XCAPE RESCUE EUIPMENT

ROPE;FLEXIBLE ANCHOR LINE,WEBBING ROPE

TYPE FLEXIBLE ANCHOR LINE

DIMENSIONS WD 45 MM X THK 3,5-4 MM

MATERIAL WEBBING

STRUCTURE WEAVE

STRENGTH SAVE WORKING LOAD 3500 KG

FOR USE ON XCAPE RESCUE EUIPMENT



_________________________ ____________________________



KIT;FALL ARREST,RESCUE KIT; TYPE FALL ARREST, APPLICATION RESCUE

SPECIAL FEATURES PETZL GEMINI PULLY SYSTEM

PACKAGE TYPE EQUIPMENT BAG WITH SLIDE

FASTENER

ASCENDING DEVICE; 0.5 M X 11 MM ROPEWITH 1/4 TURN KARADINER

2 METER TELESCOPIC POLE

NON CONDUCTIVE AND COMPLETE WITH FROG ATTACHMENT

2 X 1.5 METER ROUND WEBBING SLINGS

SAFTY KNIFE

KIT MUST INCLUDE ROPES

50M ITEM 35205813, 100M ITEM 35205825, 150M ITEM 35205837 & 200M ITEM 35205849

ROPE;LOW STRETCH,NYLN,STRUCT KERMANTLE

ROPE

TYPE LOW STRETCH

DIMENSIONS 11 MILLIMETER X 12.5 METER REACH PER 50M

MATERIAL NYLON

STRUCTURE KERMANTLE

STRENGTH SAFE WORKING LOAD 2200 KG



_________________________ ____________________________


FOR USE ON FALL ARREST RESCUE KIT (FARK)


LANYARD SAFETY;DOUBLE,LD CPCTY 220 KG

LANYARD, SAFETY

TYPE DOUBLE

LOAD CAPACITY 220 KG

MATERIAL ROPE OR POLYAMIDE

HOOK TYPE SNAP, 65MM

HOOK MATERIAL ALUMINUM

SPECIAL FEATURES 1 TWIST-LOCK KARABINER;

TWO HOOKS

HOOK SAFETY;ANCHOR,100MM OPENING HOOK, SAFETY

TYPE ANCHOR

DIMENSIONS 100MM OPENING

MATERIAL ALUMINIUM

FINISH 8MM RELEASE CHORD


15KN BREAKING STRENGHT



_________________________ ____________________________



KIT;FALL ARREST,RESCUE,QTY 1 KIT; TYPE FALL ARREST, APPLICATION RESCUE

QUANTITY 1

SPECIAL FEATURES 8 METER RETRACTABLE LANYARD


SPECIFICATION: CE0123, EN 360, SABS 50360

INTERNAL SHOCK ABSORBING FEATURE

COVER PLASTIC WEB WD 25 MM NYLON

MAX WEIGHT 150KG

BREAKING STRENGH 12 KN

STEEL KARABINER 17MM OPENING

19MM ALUMINIUM SWIVEL HOOK OPENING

POLE;TELESCOPIC,8 M EXT POLE; TYPE TELESCOPIC

DIMENSIONS 8 METER EXTENDED


TO INSTALL ANCHORAGE HOOK FOR FALL ARREST



_________________________ ____________________________


1.9 METER WHEN FOLDED


KIT;LADDER,LASHING ATTACHMENT,8 MM ROPE

KIT; TYPE LADDER, APPLICATION LASHING ATTACHMENT

SPECIAL FEATURES 8 MM ROPE

PACKAGE TYPE COMPLETE SET OF TWO FOR ONE LADDER

TRAP WEBBING;SLING,WD 45 MM,THK 8 MM

STRAP, WEBBING

TYPE SLING

WIDTH 45 MM, THICKNESS 8 MM, LENGTH 2 M

MATERIAL POLYMIDE

COLOR BLACK

LOAD RATING 220 KG

SPECIAL FEATURES WITH SHARP EDGE PROTECTOR

PACKAGE TYPE BAG, PLASTIC



_________________________ ____________________________


PROTECTOR HEARING;SUPREME-PRO,28 DB PROTECTOR, HEARING

TYPE SUPREME-PRO

DECIBEL 28 DB

COLOR GREEN

MATERIAL PLASTIC/STEEL


PROTECTOR HEARING;SUPREME-PRO,28 DB SPECIAL FEATURES ADJUSTABLE VOLUME

FURNISHED ITEMS HEAD & NECK BAND

PACKAGE TYPE PLASTIC CONTAINER

SPECIFICATION: ANSI S3.19-1974, EN352-1, EN352-4, EN352-6, SNR=25DB, MEDIUM=21DB, NRR=18BD



_________________________ ____________________________


JACKET, WORKWEAR FIRE RESISTANT JACKET, UTILITY: WORKWEAR, ,

GENDER UNISEX

SLEEVE LENGTH LONG

COLOR ORANGE

JACKET MATERIAL COTTON DRILL, D59

SPECIAL FEATURES LOGO, TRANSNET

PACKAGE TYPE ENVELOPE, PLASTIC

SPECIFICATION: CSS 286.21. G26 EN 1149. EN 471. EN531. SANS434 REFERENCE NO: 35180003

ALL FABRICS MUST BE FIRE RESISTANT (INHERENT) AND ANTISTATIC

GARMENTS TO BE TRIPPLE STITCH AT TENTION POINTS



_________________________ ____________________________



TROUSERS, WORKWEAR FIRE RESISTANT TROUSER, UTILITY: WORKWEAR

GENDER UNISEX

COLOR ORANGE

TROUSER MATERIAL COTTON DRILL, D59

STYLE 2 PIECE

LEG BOTTOM TYPE PLAIN HEM

POCKET TYPE ONE HIP: ONE RULE: TWO SIDE, TROUSER POCKET QUANTITY 4

CLOSURE METHOD SLIDE FASTTENER

SPECIAL FEATURES WITH REFLECTIVE STRIPS

PACKAGE TYPE ENVELOPE, PLASTIC

SPECIFICATION: CSS 286.21. G26 EN 1149. EN 471. EN531. SANS434 REFERENCE NO: 35180217

ALL FABRICS MUST BE FIRE RESISTANT

(INHERENT) AND ANTISTATIC

GARMENTS TO BE TRIPPLE STITCH AT TENTION POINTS



_________________________ ____________________________



OVERALL UTILITY;CONTI SUIT, UNISEX OVERALL, UTILITY

TYPE CONTI SUIT

GARMENT GENDER UNISEX

MATERIAL COTTON 50/POLYESTER 50

DESIGN TYPE 2 PIECE

COLOR BLUE TONE/ORANGE

CLOSURE METHOD ZIP YKK

SPECIAL FEATURES REFLECTIVE STRIPS SILVER

SEWN ON FRONT CHEST/BACK/SLEEVES OF JACKET/BOTH LEGS OF PANTS

TRIPLE STITCH

JACKET: CONCEALED FRONT; WITH 3 PATCH POCKETS WITH STITCHED DOWN FLAPS PANTS: BLUE, NAVY

FLAT FRONT, WITH “TRANSNET” LOGO EMBROIDED ON LEFT BREAST OR POCKET AND “FREIGHT RAIL” EMBROIDED ON RIGHT BREAST



_________________________ ____________________________



OVERALL UTILITY;CONTI SUIT ,UNISEX OVERALL, UTILITY

TYPE CONTI SUIT

GENDER UNISEX

MATERIAL DENIM

DESIGN TYPE 2 PIECE

COLOR BLUE

CLOSURE METHOD ZIP YKK WITH ONE SILVER/ORANGE REFLECTOR TAPE SEWN ON EACH OF THE JACKET SLEEVES AS WELL AS THE BACK/FRONT OF THE JACKET

THE JACKET MUST HAVE A CONCEALED FRONT,

THREE PATCH POCKETS WITH STICHED DOWN FLAPS/TRIPLE STICH

THE PANTS MUST HAVE SILVER/ORANGE REFLECTOR TAPE ON BOTH LEGS OF THE PANTS

A REINFORCED CROTCH

METAL BUTTON

TRIPLE STICHED INNER TROUSER LEG/BACK RISE

BACK PATCH POCKET/TWO SIDE SLANT POCKETS

SANS APPROVED



_________________________ ____________________________


COTTON 100%

WITH TRANSNET FREIGHT RAIL LOGO EMBROIDED ON LEFT BREAST OR POCKET


T-SHIRT MEN'S;CREW NECK, NEON ORANGE T-SHIRT, MEN'S

TYPE CREW NECK

MATERIAL COTTON 100 PCT

COLOR NEON ORANGE

155 GRAM



_________________________ ____________________________


ANNEXURE B SBD 6.2

DECLARATION CERTIFICATE FOR LOCAL PRODUCTION AND CONTENT FOR DESIGNATED SECTORS

This Standard Bidding Document (SBD) must form part of all bids invited. It contains general information and serves as

a declaration form for local content (local production and local content are used interchangeably).

Before completing this declaration, bidders must study the General Conditions, Definitions, Directives applicable in

respect of Local Content as prescribed in the Preferential Procurement Regulations, 2017, the South African Bureau of

Standards (SABS) approved technical specification number SATS 1286:2011 (Edition 1) and the Guidance on the

Calculation of Local Content together with the Local Content Declaration Templates [Annex C (Local Content

Declaration: Summary Schedule), D (Imported Content Declaration: Supporting Schedule to Annex C) and E (Local

Content Declaration: Supporting Schedule to Annex C)].

1. General Conditions

1.1. Preferential Procurement Regulations, 2017 (Regulation 8) makes provision for the promotion of local production and content.

1.2. Regulation 8.(2) prescribes that in the case of designated sectors, where in the award of bids local production and content is of critical importance, such bids must be advertised with the specific bidding condition that only locally produced goods, services or works or locally manufactured goods, with a stipulated minimum threshold for local production and content will be considered.

1.3. In terms of Regulation 16(2) of the Preferential Procurement Regulations, 2017, any sector designated and minimum threshold determined for local production and content for purposes of regulation 9 of the 2011 Regulations and in force immediately before the repeal of the 2011 Regulations, are regarded as having been done under regulation 8(1) of the 2017 Regulations.

1.4. Where necessary, for bids referred to in paragraph 1.2 above, a two stage bidding process may be followed, where the first stage involves a minimum threshold for local production and content and the second stage price and B-BBEE.

1.5. A person awarded a contract in relation to a designated sector, may not sub-contract in such a manner that the local production and content of the overall value of the contract is reduced to below the stipulated minimum threshold.

1.6. The local content (LC) expressed as a percentage of the bid price must be calculated in accordance with the SABS approved technical specification number SATS 1286: 2011 as follows:

LC = [1 - x / y] * 100

Where

x is the imported content in Rand

y is the bid price in Rand excluding value added tax (VAT)



_________________________ ____________________________


Prices referred to in the determination of x must be converted to Rand (ZAR) by using the exchange rate published

by South African Reserve Bank (SARB) at 12:00 on the date of advertisement of the bid as indicated in paragraph

4.1 below.

The SABS approved technical specification number SATS 1286:2011 is accessible on

http:/www.thedti.gov.za/industrial development/ip.jsp at no cost.

1.7. A bid will be disqualified if this Declaration Certificate and the Annex C (Local Content Declaration: Summary Schedule) are not submitted as part of the bid documentation;

2. The stipulated minimum threshold(s) for local production and content (refer to Annex A of SATS 1286:2011) for this bid is/are as follows:

Description of services, works or goods Stipulated minimum threshold

CREAM BARRIER; NIVEA OR EQUIVALENT, SPF

40, 200 ML

100%

PROTECTOR HEARNG; EARMUFFS, NNR 21,

VARIOUS

100%

PLUG EAR; COMPRESSION, RUBBR, NNR 25 DB 100%

PROTECTOR HEARNG; NOISE CLIPPER, 85-120

DB

100%

PROTECTOR HEARNG; TACTICAL PRO, 26 DB 100%

CAP, WORK, WELDER 100%

BALACLAVA; OPEN FACE, ONE SIZE FITS ALL 100%

HAT UTLTY; BUSH, FLOPPY, 52 CM -64CM,

STEWART BLUE

100%

BOOTS SFTY; CHUKKA OR EQUIVALENT, 225

(3)-(15), STEEL CAP

100%

BOOTS SFTY; CHUKKA OR EQUIVALENT, SPCL,

STEEL CAP

100%

BOOTS SAFETY; MALE (7-12) 100%

BOOTS SAFETY CHUKKA (3-10) 100%

BOOTS CHUKKA, SPCL, FEM STEEL CAP 100%

BOOTS, NON-STEEL, TOE CAP (5-13) 100%

BOOTS SAFETY, WALNUT (6-12) 100%

BOOTS COMBAT STYLE STEEL CAP (5) 100%

BOOTS COMBAT STYLE BROWN (6-12) 100%

BOOTS COMBAT STYLE, SPCL, BROWM 100%

BOOTS KNEE; GUM; SAFETY; (4-12) 100%



_________________________ ____________________________


BOOTS SAFETY; MALE ;( 4-12) 100%

BOOTS SAFETY; FEM; (3-10) 100%

PROTECTOR; SIZE 5PE- 12PE 100%

PROTECTOR; ONE SIZE FIT ALL 100%

APRON IMPERMAEBLE 100%

APRON; WAIST 100%

APRON WELDER 100%

APRON WELDER; SHOULDER 100%

APRON; SPILT TYPE 100%

APRON; GRAY 100%

SPATS; SAFETY 100%

SPATS; WELDING 100%

GLOVES; ITEM 111- 162 100%

FACESHIELD; ITEM 163-164 100%

GOOGLES / SPECTACLES; ITEM 165- 175 100%

LANYARD; ITEM 176- 177 100%

HOOD; ITEM 178-179 100%

HELMET; ITEM 180-187 100%

STRAP; ITEM 188-189 100%

MASK; ITEM 190-196 100%

PADS, KNEE; ITEM 197-198 100%

COVERALLS; (5-12) 100%

VEST HI, ITEM 207-217 100%

BIB; ITEM 218-223 100%

VEST HI; ITEM 224-238 100%

PAD; 25MM 100%

BELT; ITEM 240-244 100%

TROUSERS; ITEM 245-261 100%

JACKET; ITEM 262-286 100%

TROUSERS; ITEM 287-295 100%

SUIT; ITEM 296- 312 100%

HARNESS; ITEM 313-319 100%

LANYARD/ KIT; ITEM 320-325 100%

ROPE; ITEM 326- 335 100%

LANYARD; 220KG 100%

HOOK 100%

KIT 100%

POLE 100%

KIT LADDER 100%



_________________________ ____________________________


TRAP; 8MM 100%

PROTECTOR; 28 DB 100%

JACKET; WORKWEAR – ITEM 343-360 100%

WORKWEAR – ITEM 361- 378 100%

OVERALL; ITEM 379-389 100%

OVERALL; ITEM 390-400 100%

T-SHIRT; CREW NECK; ITEM 401-406 100%

3. Does any portion of the services, works or goods offered have any imported content?


YES NO

3.1. If yes, the rate(s) of exchange to be used in this bid to calculate the local content as prescribed in paragraph 1.5 of the general conditions must be the rate(s) published by SARB for the specific currency at 12:00 on the date of advertisement of the bid.

The relevant rates of exchange information is accessible on www.reservebank.co.za

Indicate the rate(s) of exchange against the appropriate currency in the table below (refer to Annex A of SATS

1286:2011):

Currency Rates of exchange

US Dollar

Pound Sterling

Euro

Yen

Other

NB: Bidders must submit proof of the SARB rate (s) of exchange used.

4. Where, after the award of a bid, challenges are experienced in meeting the stipulated minimum threshold for local content the dti must be informed accordingly in order for the dti to verify and in consultation with the AO/AA provide directives in this regard.

LOCAL CONTENT DECLARATION

(REFER TO ANNEX B OF SATS 1286:2011)

http://www.reservebank.co.za/



_________________________ ____________________________


LOCAL CONTENT DECLARATION BY CHIEF FINANCIAL OFFICER OR OTHER LEGALLY RESPONSIBLE PERSON NOMINATED IN WRITING BY THE CHIEF EXECUTIVE OR SENIOR MEMBER/PERSON WITH MANAGEMENT RESPONSIBILITY (CLOSE CORPORATION, PARTNERSHIP OR INDIVIDUAL)

IN RESPECT OF BID NO. ERAC-VAR-23795

ISSUED BY: TRANSNET SOC LTD NB

1 The obligation to complete, duly sign and submit this declaration cannot be transferred to an external authorized representative, auditor or any other third party acting on behalf of the bidder.

2 Guidance on the Calculation of Local Content together with Local Content Declaration Templates (Annex C, D and E) is accessible on http://www.thdti.gov.za/industrial development/ip.jsp. Bidders should first complete Declaration D. After completing Declaration D, bidders should complete Declaration E and then consolidate the information on Declaration C. Declaration C should be submitted with the bid documentation at the closing date and time of the bid in order to substantiate the declaration made in paragraph (c) below. Declarations D and E should be kept by the bidders for verification purposes for a period of at least 5 years. The successful bidder is required to continuously update Declarations C, D and E with the actual values for the duration of the contract.

I, the undersigned, …………………………….................................................... (full names), do hereby declare, in my capacity as ……………………………………………..of............................................................................(name of bidder entity), the following:

(a) The facts contained herein are within my own personal knowledge.

(b) I have satisfied myself that:

(i) the goods/services/works to be delivered in terms of the above-specified bid comply with the minimum local content requirements as specified in the bid, and as measured in terms of SATS 1286:2011; and

(c) The local content percentage (%) indicated below has been calculated using the formula given in clause 3 of SATS 1286:2011, the rates of exchange indicated in paragraph 4.1 above and the information contained in Declaration D and E which has been consolidated in Declaration C:

Bid price, excluding VAT (y) R

Imported content (x), as calculated in terms of SATS 1286:2011 R

Stipulated minimum threshold for local content (paragraph 3 above) CREAM BARRIER; NIVEA OR EQUIVALENT, SPF 40, 200 ML 1

100%

Local content %, as calculated in terms of SATS 1286:2011



Stipulated minimum threshold for local content (paragraph 3 above) PROTECTOR HEARNG; EARMUFFS, NNR 21, VARIOUS 100%

100%




Stipulated minimum threshold for local content (paragraph 3 above) PLUG EAR; COMPRESSION, RUBBR, NNR 25 DB 100%

100%


http://www.thdti.gov.za/industrial%20development/ip.jsp



_________________________ ____________________________




Stipulated minimum threshold for local content (paragraph 3 above) PROTECTOR HEARING

100%




Stipulated minimum threshold for local content (paragraph 3 above) PROTECTOR HEARING;TACTICAL

100%




Stipulated minimum threshold for local content (paragraph 3 above) CAP,WORK, WELDER

100%




Stipulated minimum threshold for local content (paragraph 3 above) BALACLAVA,OPEN FACE

100%




Stipulated minimum threshold for local content (paragraph 3 above) HAT UTILILTY, 52CM-64CM

100%




Stipulated minimum threshold for local content (paragraph 3 above) BOOTS SFTY;CHUKKA; SIZE 3-15

100%




Stipulated minimum threshold for local content (paragraph 3 above) BOOTS SAFETY ; MALE ; SIZE 6-12 AND SPCL

100%




Stipulated minimum threshold for local content (paragraph 3 above) BOOTS SFTY;CHUKKA; FEM SIZE 3-10 AND SPCL

100%




_________________________ ____________________________




Stipulated minimum threshold for local content (paragraph 3 above) BOOTS NON-STEEL SIZE 5-13

100%




Stipulated minimum threshold for local content (paragraph 3 above) BOOTS ; WALNUT ; SIZE 6 - 12

100%




Stipulated minimum threshold for local content (paragraph 3 above) BOOTS ;COMBAT STLYE SIZE 5-12 AND SPCL

100%




Stipulated minimum threshold for local content (paragraph 3 above) BOOTS KNEE;GUM; SIZE 4 -12

100%




Stipulated minimum threshold for local content (paragraph 3 above) BOOTS;ITEM 79 -95

100%




Stipulated minimum threshold for local content (paragraph 3 above) PROTECTOR, SIZE 5,PE -12,PE

100%




Stipulated minimum threshold for local content (paragraph 3 above) PROTECTOR,ONE SIZE FITS ALL

100%




Stipulated minimum threshold for local content (paragraph 3 above) APRON;IMPERABLE

100%




_________________________ ____________________________




Stipulated minimum threshold for local content (paragraph 3 above) APRON;BLACKSMITH

100%




Stipulated minimum threshold for local content (paragraph 3 above) APRON;WELDER;LG 900

100%




Stipulated minimum threshold for local content (paragraph 3 above) APRON;WELDER;SHOULDER

100%




Stipulated minimum threshold for local content (paragraph 3 above) APRON; WELDER ;SPLIT

100%




Stipulated minimum threshold for local content (paragraph 3 above) APRON, GRAY

100%




Stipulated minimum threshold for local content (paragraph 3 above) SPATS,SAFETY

100%




Stipulated minimum threshold for local content (paragraph 3 above) SPATS;WELD

100%




Stipulated minimum threshold for local content (paragraph 3 above) GLOVES,SAFETY; ITEM 112-151,155-157,161-162

100%




_________________________ ____________________________




Stipulated minimum threshold for local content (paragraph 3 above) MITTENS HEAT, ITEM 152-154,

100%




Stipulated minimum threshold for local content (paragraph 3 above) MITTENS HEAT; ITEM-158-160

100%




Stipulated minimum threshold for local content (paragraph 3 above) FACESHIELD; ITEM 163-164

100%




Stipulated minimum threshold for local content (paragraph 3 above) GOOGLES INDL; ITEM 165-167

100%




Stipulated minimum threshold for local content (paragraph 3 above) LENS;GOOGLE;INDUSTRIAL

100%




Stipulated minimum threshold for local content (paragraph 3 above) GOOGLE,ITEM 169, SPECTALE ; ITEM 170-175

100%




Stipulated minimum threshold for local content (paragraph 3 above) LANYARD; LG 600MM

100%




Stipulated minimum threshold for local content (paragraph 3 above) FLASHLIGHT;HEADLAMP

100%




_________________________ ____________________________




Stipulated minimum threshold for local content (paragraph 3 above) PROTECTOR HEARNG; EARMUFFS, NNR 21, VARIOUS 100%

100%




Stipulated minimum threshold for local content (paragraph 3 above) HOOD ABRSV,

100%




Stipulated minimum threshold for local content (paragraph 3 above) HOOD;BEE

100%




Stipulated minimum threshold for local content (paragraph 3 above) HELMET;SFTY; ITEM 180 -187

100%




Stipulated minimum threshold for local content (paragraph 3 above) STRAP; ITEM 188-189

100%




Stipulated minimum threshold for local content (paragraph 3 above) MASK; ITEM 190-192

100%




Stipulated minimum threshold for local content (paragraph 3 above) MASK,FULL FACE

100%




Stipulated minimum threshold for local content (paragraph 3 above) CARTRIDGE,FULL MASK

100%




_________________________ ____________________________




Stipulated minimum threshold for local content (paragraph 3 above) MASK AIR; ITEM 195-196

100%




Stipulated minimum threshold for local content (paragraph 3 above) PADS; ITEM 197-198

100%




Stipulated minimum threshold for local content (paragraph 3 above) COVERALLS,PVC, ITEM 199-206

100%




Stipulated minimum threshold for local content (paragraph 3 above) VEST HI VISB; ITEM 207-217

100%




Stipulated minimum threshold for local content (paragraph 3 above) BIB REFLCTV, ITEM 218-223

100%




Stipulated minimum threshold for local content (paragraph 3 above) VEST HIGH VISIBILITY; ITEM 224-228

100%




Stipulated minimum threshold for local content (paragraph 3 above) VEST HI VISB- ITEM 229-238

100%




Stipulated minimum threshold for local content (paragraph 3 above) PAD,SHOULDER

100%




_________________________ ____________________________




Stipulated minimum threshold for local content (paragraph 3 above) BELT SFTY; ITEM 240-244

100%




Stipulated minimum threshold for local content (paragraph 3 above) TROUSERS UTLTY; ITEM 245-261

100%




Stipulated minimum threshold for local content (paragraph 3 above) JACKET; ITEM 262 -286

100%




Stipulated minimum threshold for local content (paragraph 3 above) TROUSERS; ITEM 287-295

100%




Stipulated minimum threshold for local content (paragraph 3 above) SUIT – ITEM 296-312

100%




Stipulated minimum threshold for local content (paragraph 3 above) HARNESS SFTY, ITEM 313-318

100%




Stipulated minimum threshold for local content (paragraph 3 above) HARNESS ; ITEM 319

100%




Stipulated minimum threshold for local content (paragraph 3 above) LANYARD SFTY,WEBBING DOUBLE

100%




_________________________ ____________________________




Stipulated minimum threshold for local content (paragraph 3 above) LANYARD;DBL

100%




Stipulated minimum threshold for local content (paragraph 3 above) KIT,RESCUE

100%




Stipulated minimum threshold for local content (paragraph 3 above) LANYARD; LG 2M

100%




Stipulated minimum threshold for local content (paragraph 3 above) STRAP,50MM

100%




Stipulated minimum threshold for local content (paragraph 3 above) KIT,FORCE BRAKE

100%




Stipulated minimum threshold for local content (paragraph 3 above) ROPE ; ITEM 326-330

100%




Stipulated minimum threshold for local content (paragraph 3 above) KIT,RESCUE-ITEM 331

100%




Stipulated minimum threshold for local content (paragraph 3 above) ROPE, ITEM 332-335

100%




_________________________ ____________________________




Stipulated minimum threshold for local content (paragraph 3 above) LANYARD

100%




Stipulated minimum threshold for local content (paragraph 3 above) HOOK SAFETY;100MM

100%




Stipulated minimum threshold for local content (paragraph 3 above) KIT,ITEM 338

100%




Stipulated minimum threshold for local content (paragraph 3 above) POLE,ITEM 339

100%




Stipulated minimum threshold for local content (paragraph 3 above) KIT,LADDER

100%




Stipulated minimum threshold for local content (paragraph 3 above) TRAP WEBBING

100%




Stipulated minimum threshold for local content (paragraph 3 above) PROTECTOR HEARING

100%




Stipulated minimum threshold for local content (paragraph 3 above) JACKET, WORKWEAR; ITEM 343-360

100%




_________________________ ____________________________




Stipulated minimum threshold for local content (paragraph 3 above) TROUSER,WORKWEAR, ITEM 361-378

100%




Stipulated minimum threshold for local content (paragraph 3 above) OVERALL UTILITY; ITEM 379-389

100%




Stipulated minimum threshold for local content (paragraph 3 above) OVERALL UTILITY;UNISEX; ITEM 390-400

100%




Stipulated minimum threshold for local content (paragraph 3 above) T-SHIRT MEN; CREW; ITEM 401-406

100%


If the bid is for more than one product, the local content percentages for each product contained in Declaration C shall be used instead of the table above. The local content percentages for each product has been calculated using the formula given in clause 3 of SATS 1286:2011, the rates of exchange indicated in paragraph 4.1 above and the information contained in Declaration D and E.

(d) I accept that the Procurement Authority / Institution has the right to request that the local content be

verified in terms of the requirements of SATS 1286:2011.

(e) I understand that the awarding of the bid is dependent on the accuracy of the information furnished in this application. I also understand that the submission of incorrect data, or data that are not verifiable as described in SATS 1286:2011, may result in the Procurement Authority / Institution imposing any or all of the remedies as provided for in Regulation 14 of the Preferential Procurement Regulations, 2017 promulgated under the Preferential Policy Framework Act (PPPFA), 2000 (Act No. 5 of 2000).

SIGNATURE: DATE: ___________ WITNESS No. 1 DATE: ___________ WITNESS No. 2 DATE: ___________



_________________________ ____________________________


SATS 1286.2011

Annex C

Local Content Declaration - Summary Schedule

(C1) Tender No. ERAC-VAR-23795

(C2) Tender description:

(C3) Designated product(s)

(C4) Tender Authority:

(C5) Tendering Entity name:

(C6) Tender Exchange Rate: Pula EU GBP

(C7) Specified local content %

Calculation of local content Tender summary

Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)1

2

3

4

5

6

7

8

(C20) Total tender value R 0

Signature of tenderer from Annex B (C21) Total Exempt imported content R 0

(C22) Total Tender value net of exempt imported content R 0

(C23) Total Imported content R 0

(C24) Total local content R 0

Date: (C25) Average local content % of tender

Note: VAT to be excluded from all

calculations

PROTECTOR HEARING 26DB

CAP,WORK,WELDER

BALACLAVA,OPEN FACE

HAT UTLYT,52CM,BLUE

PROTECTOR HEARING 85-120

List of items

(C9)CREAM BARRIER SPF 200ML

PROTECTOR HEARING NNR21

PLUG EAR NNR 25



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)9

10

11

12

13

14

15

16







HAT UTLTY,58CM,BLUE


calculations

HAT UTLTY,62CM,BLUE

HAT UTLTY,64CM,BLUE

BOOTS SFTY,(3) STEEL CAP


HAT UTLTY,60CM,BLUE

List of items

(C9)HAT UTLTY,54CM,BLUE

HAT UTLTY,56CM,BLUE



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)17

18

19

20

21

22

23

24







BOOTS SFTY,(7) STEELCAP


calculations






List of items

(C9)BOOTS SFTY,(5) STEELCAP




_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)25

26

27

28

29

30

31

32









calculations

BOOTS,SAFETY,10 MALE



BOOTS SAFETY,5 MALE

BOOTS SFTY, SPCL,STEEL CAP

List of items

(C9)BOOTS SFTY,(13) STEEL CAP




_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)33

34

35

36

37

38

39

40







BOOTS, SAFETY,8,MALE


calculations

BOOTS,SFTY,(3)FEM,BLACK





List of items

(C9)BOOTS, SAFETY,6,MALE




_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)41

42

43

44

45

46

47

48







BOOTS,SFTY,(9),FEM,270


calculations

BOOTS,SFTY,SPCL,FEM

BOOTS,NON-STEEL (5)

BOOTS,NON-STEEL (6)

BOOTS,NON-STEEL (7)

BOOTS,SFTY,(10)FEM,277

List of items

(C9)BOOTS,SFTY,(7)FEM,BLACK




_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)49

50

51

52

53

54

55

56







BOOTS,NON-STEEL(10)


calculations

BOOTS,NON-STEEL(12)

BOOTS,NON-STEEL(13)

BOOTS,SAFETY,10,WALNUT

BOOTS,SAFETY,11,WALNUT

BOOTS,NON-STEEL(11)

List of items

(C9)BOOTS,NON-STEEL(8)

BOOTS,NON-STEEL(9)



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)57

58

59

60

61

62

63

64







BOOTS SAFETY,7,WALNUT


calculations


BOOTS SFTY,COMBAT,5

BOOTS SFTY,COMBAT,6

BOOTS SFTY,COMBAT,7


List of items

(C9)BOOTS SAFETY,12,WALNUT




_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)65

66

67

68

69

70

71

72







BOOTS ,SFTY,COMBAT ,11


calculations

BOOTS ,SFTY,COMBAT ,SPCL

BOOTS,KNEE,PVC,(4)

BOOTS,KNEE,PVC,(5)

BOOTS,KNEE,PVC,(6)


List of items

(C9)BOOTS ,SFTY,COMBAT, 8




_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)73

74

75

76

77

78

79

80







BOOTS,KNEE,PVC (9)


calculations

BOOTS,KNEE,PVC (11)

BOOTS,KNEE,PVC (12)

BOOTS,SFTY,(4) MALE

BOOTS,SFTY,(5) MALE

BOOTS,KNEE,PVC (10)

List of items

(C9)BOOTS,KNEE,PVC (7)

BOOTS,KNEE,PVC (8)



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)81

82

83

84

85

86

87

88







BOOTS,SFTY,(8)MALE


calculations

BOOTS,SFTY,(10)MALE

BOOTS,SFTY,(11)MALE

BOOTS,SFTY,(12)MALE

BOOTS,SFTY,(3)FEM

BOOTS,SFTY,(9)MALE

List of items

(C9)BOOTS,SFTY,(6)MALE

BOOTS,SFTY,(7)MALE



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)89

90

91

92

93

94

95

96







BOOTS, SFTY,(6) FEM


calculations

BOOTS, SFTY,(8) FEM

BOOTS, SFTY,(9) FEM

BOOTS, SFTY,(10) FEM

PROTECTOR , SIZE 5,PE

BOOTS, SFTY,(7) FEM

List of items

(C9)BOOTS, SFTY,(4) FEM

BOOTS, SFTY,(5) FEM



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)97

98

99

100

101

102

103

104







PROTECTOR,SIZE 8,PE


calculations

PROTECTOR,SIZE 10,PE

PROTECTOR,SIZE 12,PE

PROTECTOR,ONE SIZE FITS

APRON,IMPERMEABLE

PROTECTOR,SIZE 9,PE

List of items

(C9)PROTECTOR,SIZE 6,PE

PROTECTOR,SIZE 7,PE



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)105

106

107

108

109

110

111

112







APRON,WELDER,SHOULDER


calculations

APRON,WLDRS,GRAY

SPATS,SAFETY

SPATS,WELD,LONG

GLOVE,30CM,LH

APRON,WELDER,SPLIT

List of items

(C9)APRON,BLACKSMITH

APRON,WELDER,ARC,WELD



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)113

114

115

116

117

118

119

120







GLOVE,SAFETY,30CM,LH


calculations

GLOVE,SAFETY,40CM,LH

GLOVE,SAFETY,40CM,RH

GLOVE,WELDER'S,SHORT

GLOVE,RUBBER,AUTOPSY

GLOVE,SAFETY,30CM,RH

List of items

(C9)GLOVE,30CM,RH

GLOVE UTILITY,NAPPA



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)121

122

123

124

125

126

127

128







GLOVES,UTLTY,S,GOAT SKIN


calculations

GLOVES,UTLTY,L,GOAT SKIN

GLOVES,UTLTY,XL,GOAT

GLOVES,UTLTY,S,GOAT SKIN

GLOVES,UTLYT,M,GOAT SKIN

GLOVES,UTLTY,M,GOAT SKIN

List of items

(C9)GLOVE,RUBBER,CHEMICAL

GLOVES,UTLTY,MALE



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)129

130

131

132

133

134

135

136







GLOVES,UTLTY,S,PIGSKIN


calculations

GLOVES,UTLTY,L,PIGSKIN

GLOVES,UTLTY,XL,PIGSKIN

GLOVES,UTLTY,S,CHROME

GLOVES,UTLTY,S,CHROME

GLOVES,UTLTY,M,PIGSKIN

List of items

(C9)GLOVES,UTLTY,L,GOAT SKIN

GLOVES,UTLTY,XL,GOAT SKIN



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)137

138

139

140

141

142

143

144







GLOVES,ONE SIZE FIT ALL


calculations

GLOVES,M,POLYMIDE

GLOVES,L,POLYMIDE

GLOVES,S,NITRILE

GLOVES,M,NITRILE

GLOVES,S,POLYMIDE

List of items

(C9)GLOVES,UTLTY,L,CHROME,

GLOVES,UTLTY,XL,CHROME,



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)145

146

147

148

149

150

151

152







GLOVES,NITRILE, YELLOW


calculations

GLOVES,M,PVC,GREEN

GLOVES,L, PVC,GREEN

GLOVES,XL, PVC,GREEN

MITTENS,40CM

GLOVES,S,PVC,GREEN

List of items

(C9)GLOVES,L, NITRILE

GLOVES,XL, NITRILE



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)153

154

155

156

157

158

159

160







GLOVE SET,WRIST,PVC


calculations

GLOVE SET,SHOULDER,PVC

MITTENS,30CM

MITTENS,40CM

MITTENS,60CM

GLOVE SET,ELBOW,PVC

List of items

(C9)MITTENS,60CM

MITTENS,30CM



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)161

162

163

164

165

166

167

168







FACESHIELD


calculations

GOOGLES,ACETATE

GOOGLES,CLEAR

GOOGLES,INDUSTRIAL

LENS,GOGGLE

FACESHIELD

List of items

(C9)GLOVES,WLDRS,400MM RED

GLOVES,WELDERS,PINK/RED



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)169

170

171

172

173

174

175

176







GOOGLES,GREY


calculations

GOOGLES,CLEAR

SPECTACLE,GRANGE,CLEAR

SPECTACLE,SUPREME,CLEAR

LANYARD,600MM

GOOGLES,CLEAR

List of items

(C9)GOOGLES,GREY

SPECTACLE SAFETY



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)177

178

179

180

181

182

183

184







HOOD,NETTING MATERIAL


calculations

HELMET,WHITE

PROTECTOR,HARD,HAT

HELMET,50-64CM,WHITE

HELMET,ONE SIZE FITS ALL

HELMET,WHITE

List of items

(C9)FLASHLIGHT,3V

HOOD,ABRSV,BLUE/GREY



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)185

186

187

188

189

190

191

192







HELMET,HARD,HAT


calculations

STRAP,CHIN,ELASTICISED

MASK AIR FILTIRING

RESPIRATOR AIR FILTR

RESPIRATOR AIR FILTR

STRAP,CHIN,HELMET

List of items

(C9)HELMET,HARD,HAT

HELMET,AUTO DARK



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)193

194

195

196

197

198

199

200







MASK,DISPOSABLE


calculations

PADS KNEE,PVC

PADS KNEE,MOULDED

COVERALLS,5,PVC

COVERALLS,6,PVC

MASK,DISPOSABLE,DUST

List of items

(C9)MASK,FACE,SILICON

CATRIDGE,FULL MASK



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)201

202

203

204

205

206

207

208







COVERALLS,9,PVC


calculations

COVERALLS,11,PVC

COVERALLS,12,PVC

VEST,S,YELLOW

VEST,M,YELLOW

COVERALLS,10,PVC

List of items

(C9)COVERALLS,7,PVC

COVERALLS,8,PVC



_________________________ ____________________________











Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)209

210

211

212

213

214

215

216







VEST,2XL,YELLOW


calculations

VEST,4XL,YELLOW

VEST,5XL,YELLOW

VEST,6XL,YELLOW

VEST,7XL,YELLOW

VEST,3XL,YELLOW

List of items

(C9)VEST,L,YELLOW

VEST,XL,YELLOW



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)217

218

219

220

221

222

223

224







BIB,MOTO,LH


calculations

BIB,MOTO,LH

BIB,MOTO,RH

BIB,MOTO,LH

VEST,LIME,3XL

BIB,MOTO,RH

List of items

(C9)VEST,8XL,YELLOW

BIB,MOTO,RH



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)225

226

227

228

229

230

231

232







VEST,LIME,M


calculations

VEST,S,YELLOW

VEST,M,YELLOW

VEST,L,YELLOW

VEST,XL,YELLOW

VEST,LIME,XL

List of items

(C9)VEST,LIME,2XL

VEST,LIME,L



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)233

234

235

236

237

238

239

240







VEST,YELLOW,5XL


calculations

VEST,7 EXTRA LARGE

VEST,8 EXTRA LARGE

PAD,THK 25MM

BELT,S

VEST,YELLOW,6XL

List of items

(C9)VEST,YELLOW,2XL

VEST,YELLOW,4XL



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)241

242

243

244

245

246

247

248







BELT,XL


calculations

TROUSERS,77CM

TROUSERS,82CM

TROUSERS,87CM

TROUSERS,92CM

BELT,2XL

List of items

(C9)BELT,M

BELT,L



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)249

250

251

252

253

254

255

256







TROUSERS,107CM


calculations

TROUSERS,117CM

TROUSERS,122CM

TROUSERS,127CM

TROUSERS,132CM

TROUSERS,112CM

List of items

(C9)TROUSERS,97CM

TROUSERS,102CM



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)257

258

259

260

261

262

263

264







TROUSERS,147CM


calculations

TROUSERS,157CM

JACKET,77CM

JACKET,82CM

JACKET,87CM

TROUSERS,152CM

List of items

(C9)TROUSERS,137CM

TROUSERS,142CM



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)265

266

267

268

269

270

271

272







JACKET,102CM


calculations

JACKET,112CM

JACKET,117CM

JACKET,122CM

JACKET,127CM

JACKET,107CM

List of items

(C9)JACKET,92CM

JACKET,97CM



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)273

274

275

276

277

278

279

280







JACKET,142CM


calculations

JACKET,152CM

JACKET,NYLN,S

JACKET,NYLN,M

JACKET,NYLN,L

JACKET,147CM

List of items

(C9)JACKET,132CM

JACKET,137CM



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)281

282

283

284

285

286

287

288







JACKET,NYLN,3XL


calculations

JACKET,NYLN,5XL

JACKET,NYLN,SPCL

TROUSERS,S

TROUSERS,M

JACKET,NYLN,4XL

List of items

(C9)JACKET,NYLN,XL

JACKET,NYLN,2XL



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)289

290

291

292

293

294

295

296







TROUSER,2XL


calculations

TROUSER,4XL

TROUSER,5XL

TROUSER,SPCL

SUIT,SMALL 87-92

TROUSER,3XL

List of items

(C9)TROUSER,L

TROUSER,XL



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)297

298

299

300

301

302

303

304







SUIT,XL (117-122)


calculations

SUIT,6XL (167-172)

SUIT,3XL (137-142)

SUIT,4XL (147-152)

SUIT,5XL (157-162)

SUIT,2XL (127-132)

List of items

(C9)SUIT,M (97-102)

SUIT,L (107-112)



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)305

306

307

308

309

310

311

312







SUIT,122CM


calculations

SUIT,142CM

SUIT,152CM

SUIT,162CM

SUIT,152CM,ORANGE

SUIT,132CM

List of items

(C9)SUIT,97CM

SUIT,112CM



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)313

314

315

316

317

318

319

320







HARNESS,L


calculations

HARNESS,2XL

HARNESS,3XL

HARNESS,FULL BODY

LANYARD,WEBBING

HARNESS,XL

List of items

(C9)HARNESS,S

HARNESS,M



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)321

322

323

324

325

326

327

328







LANYARD,LG 2 M


calculations

KIT,FORCE BRAKE

ROPE,15M

ROPE,30M

ROPE,100M

STARP,THK 2MM

List of items

(C9)LANYARD,100 PCT

KIT,RESCUE



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)329

330

331

332

333

334

335

336







KIT,RESCUE


calculations

ROPE,100M

ROPE,150M

ROPE,200M

LANYARD,220KG

ROPE,50M

List of items

(C9)ROPE ,WEBBING,15MM

ROPE,WEBBING,50MM



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)337

338

339

340

341

342

343

344







POLE,8M EXT


calculations

TRAP,8MM

PROTECTOR,28 DB

JACKET,77CM

JACKET,82 CM

KIT,LADDER,8MM ROPE

List of items

(C9)HOOK,100MM

KIT,FALL ARREST



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)345

346

347

348

349

350

351

352







JACKET,97CM


calculations

JACKET,107CM

JACKET,112CM

JACKET,117CM

JACKET,112CM

JACKET,102CM

List of items

(C9)JACKET,87CM

JACKET,92CM



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)353

354

355

356

357

358

359

360







JACKET,137CM


calculations

JACKET,147CM

JACKET,152CM

JACKET,157CM

JACKET,SPECIAL

JACKET,142CM

List of items

(C9)JACKET,127CM

JACKET,132CM



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)361

362

363

364

365

366

367

368







TROUSERS,77CM


calculations

TROUSERS,87CM

TROUSERS,92CM

TROUSERS,97CM

TROUSERS,102CM

TROUSERS,82CM

List of items

(C9)TROUSERS,67CM

TROUSERS,72CM



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)369

370

371

372

373

374

375

376







TROUSERS,117CM


calculations

TROUSERS,127CM

TROUSERS,132CM

TROUSERS,137CM

TROUSERS,142CM

TROUSERS,122CM

List of items

(C9)TROUSERS,107CM

TROUSERS,112CM



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)377

378

379

380

381

382

383

384







OVERALL,82CM


calculations

OVERALL,92CM

OVERALL,97CM

OVERALL,102CM

OVERALL,107CM

OVERALL,87CM

List of items

(C9)TROUSERS,147CM

TROUSERS,SPECIAL



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)385

386

387

388

389

390

391

392







OVERALL,122CM


calculations

OVERALL,132CM

OVERALL,82CM

OVERALL,87CM

OVERALL,92CM

OVERALL,127CM

List of items

(C9)OVERALL,112CM

OVERALL,117CM



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)393

394

395

396

397

398

399

400







OVERALL,107CM


calculations

OVERALL,117CM

OVERALL,122CM

OVERALL,127CM

OVERALL,132CM

OVERALL,112CM

List of items

(C9)OVERALL,97CM

OVERALL,102CM



_________________________ ____________________________


SATS 1286.2011

Annex C










Tender item

no's

Tender price

- each

(excl VAT)

Exempted

imported

value

Tender value

net of

exempted

imported

content

Imported

valueLocal value

Local

content %

(per item)

Tender

Qty

Total tender

value

Total exempted

imported content

Total Imported

content

(C8) (C10) (C11) (C12) (C13) (C14) (C15) (C16) (C17) (C18) (C19)401

402

403

404

405

406







T-SHIRT,L,COTTON


calculations

T-SHIRT,S,COTTON

T-SHIRT,XL,NEON ORANGE

T-SHIRT,M,COTTON

List of items

(C9)T-SHIRT,2XL,NEON

T-SHIRT,3XL,NEON



_________________________ ____________________________


SATS 1286.2011

Annex D

Imported Content Declaration - Supporting Schedule to Annex C

(D1) Tender No. ERAC-VAR-23795

(D2) Tender description:

(D3) Designated Products:

(D4) Tender Authority:

(D5) Tendering Entity name:

(D6) Tender Exchange Rate: Pula EU R 9.00 GBP R 12.00

Calculation of imported content Summary

Tender item

no'sLocal supplier Overseas Supplier

Forign

currency

value as per

Commercial

Invoice

Tender

Exchange

Rate

Local value of

imports

Freight costs to

port of entry

All locally

incurred

landing costs

& duties

Total landed

cost excl VAT

Tender

Qty

Exempted imported

value

(D7) (D9) (D10) (D11) (D12) (D13) (D14) (D15) (D16) (D17) (D18)

(D19) Total exempt imported value R 0

B. Imported directly by the Tenderer Calculation of imported content Summary

Tender item

no's

Unit of

measureOverseas Supplier

Forign

currency

value as per

Commercial

Invoice

Tender Rate

of Exchange

Local value of

imports

Freight costs to

port of entry

All locally

incurred

landing costs

& duties

Total landed

cost excl VAT

Tender

Qty

Total imported

value

(D20) (D22) (D23) (D24) (D25) (D26) (D27) (D28) (D29) (D30) (D31)

(D32) Total imported value by tenderer R 0

Calculation of imported content Summary

Unit of measure Local supplier Overseas Supplier

Forign

currency

value as per

Commercial

Invoice

Tender Rate

of Exchange

Local value of

imports

Freight costs to

port of entry

All locally

incurred

landing costs

& duties

Total landed

cost excl VAT

Quantity

imported

Total imported

value

(D34) (D35) (D36) (D37) (D38) (D39) (D40) (D41) (D42) (D43) (D44)

(D45) Total imported value by 3rd party R 0

D. Other foreign currency paymentsSummary of

payments

Local supplier

making the

payment

Overseas

beneficiary

Foreign currency

value paid

Tender Rate

of Exchange

Local value of

payments

(D47) (D48) (D49) (D50) (D51)

(D52) Total of foreign currency payments declared by tenderer and/or 3rd party

Signature of tenderer from Annex B

(D53) Total of imported content & foreign currency payments - (D32), (D45) & (D52) above R 0

Date:

`

This total must correspond with

Annex C - C 23

This total must correspond with

Annex C - C 21

Calculation of foreign currency

payments

Type of payment

(D46)

Description of imported content

(D21)

A. Exempted imported content

Note: VAT to be excluded

from all calculations


(D8)

C. Imported by a 3rd party and supplied to the Tenderer

`


(D33)



_________________________ ____________________________


SATS 1286.2011

(E1) Tender No. ERAC-VAR-23795

(E2) Tender description:

(E3) Designated products:

(E4) Tender Authority:

(E5) Tendering Entity name:

Local Products

(Goods, Services

and Works)

Local suppliers Value % of LC

(E7) (E8)

(E9) Total local products (Goods, Services and Works) R 0

(E10) Manpower costs ( Tenderer's manpower cost) R 0

(E11) Factory overheads (Rental, depreciation & amortisation, utility costs, consumables etc.) R 0

(E12) Administration overheads and mark-up (Marketing, insurance, financing, interest etc.) R 0

(E13) Total local content R 0

Signature of tenderer from Annex B

Date:

Annex E

Local Content Declaration - Supporting Schedule to Annex C

(E6)


calculations

This total must correspond with Annex C -

C24

Description of items purchased



_________________________ ____________________________


ANNEXURE F

LOCAL CONTENT LOCAL CONTENT BACKGROUND, DOCUMENTATION, EVALUATION

DETAILS AND ADDITIONAL INSTRUCTIONS

1. LOCAL CONTENT EXPLAINED

• The Preferential Procurement Policy Framework Act makes provision for the Department of

Trade and Industry (DTI) to designate sectors in line with national development and

industrial policies for local production.

• This means that only locally produced goods, services or works or locally manufactured

goods with a stipulated minimum threshold for local production and content will be

considered

• The DTI has designated and determined the stipulated minimum threshold for Textile,

Clothing, Leather and Footwear Sector for local production and content.

• The stipulated minimum threshold percentages for local production and content for the

different categories of Furniture Sector can be perused on the National Treasury practice

note attached with the RFQ.

• For further guidance with regard to the determination of “Local Content,”

Respondents must refer to the following documentation:

• SABS approved technical specification number SATS 1286:2011

• Guidance on the calculation of Local Content [available on the DTI website:

http://www.thedti.gov.za

2. LOCAL CONTENT DOCUMENTATION

Mandatory Returnable Documents

The regulatory and mandatory RFQ Annexures, which must be completed by all

Respondents in order to declare Local Content, are as follows:



Failure to duly complete the documentation in full, declare per item, sign and submit

all these Mandatory Returnable Documents at the Closing Date and time of this RFQ

will result in a Respondent’s disqualification.

Essential Returnable Documents

Annexures D and E are Supporting Schedules to Annexure C. They are named as

follows:

Annexure D – Imported Content Declaration: Supporting Schedule to Annexure C

http://www.thedti.gov.za/



_________________________ ____________________________


Annexure E – Local Content Declaration: Supporting Schedule to Annexure C

IMPORTANT NOTES:

If certain items cannot be sourced/manufactured locally bidders should seek exemption

for such items from the DTI.

Such an exemption letter should be submitted with the proposal upon closing date.

3. LOCAL CONTENT EVALUATION

LOCAL CONTENT WILL BE EVALUATED AS THE FIRST STAGE AS A PRE-

QUALIFICATION CRITERIA

Mandatory Returnable Documents


All sections of this document MUST be completed;

The document MUST be signed, witnessed and dated;

Bidders MUST clearly declare their Local Content Percentage commitment per item

quoted.


All sections of the document MUST be completed;

The document MUST be signed and dated;

Bidders MUST clearly declare their Local Content Percentage commitment per item

quoted.

Failure to duly complete the documentation in full, declare per item, sign and

submit all these Mandatory Returnable Documents at the Closing Date and time

of this RFQ will result in a Respondent’s disqualification.

4. ADDITIONAL INSTRUCTIONS: LOCAL CONTENT QUESTIONS

It is recommended that any clarification questions be submitted in writing by bidders and

Transnet Freight Rail will respond to all bidders within 48 hours.



_________________________ ____________________________


Annexure G – Additional Specification



_________________________ ____________________________
