a dswincc01e
TRANSCRIPT
Date: 08.04.23File: swincc01e.1
SIMATIC HMISiemens AG 2003. All rights reserved.
SITRAIN Training for Automation and Drives
System Overview
Date: 08.04.23File: swincc01e.2
SIMATIC HMISiemens AG 2003. All rights reserved.
SITRAIN Training for Automation and Drives
Objectives
- Application Possibilities
- Forms of Delivery
- Core Functions
- Architecture
Date: 08.04.23File: swincc01e.3
SIMATIC HMISiemens AG 2003. All rights reserved.
SITRAIN Training for Automation and Drives
Customer Benefits
Date: 08.04.23File: swincc01e.4
SIMATIC HMISiemens AG 2003. All rights reserved.
SITRAIN Training for Automation and Drives
Application Possibilities of WinCC
Date: 08.04.23File: swincc01e.5
SIMATIC HMISiemens AG 2003. All rights reserved.
SITRAIN Training for Automation and Drives
The Basic Functions
anzahl ()float zaebeginif wert > 0 begom zae = zae + 1 endend
ProgrammingInterfaces
PLCCommunication
Protokolle
Report Designer(Report System)
Tag Logging(Archiving)
Ventil geschlossenKlappe zu
Motor ein
Alarm Logging(Message System)
StandardInterfaces
Process Visualization
Date: 08.04.23File: swincc01e.6
SIMATIC HMISiemens AG 2003. All rights reserved.
SITRAIN Training for Automation and Drives
Licenses and Options
Licenses
RC128
Power Tags
RC256
Power Tags
RC1024
Power Tags
RC8000
Power Tags
RC64,000
Power Tags
256PowerPack(128)
1024PowerPack(256)
8.000PowerPack
(1024)
64,000PowerPack
(8000)
Runtime + Configuration (RC)
Runtime128
Power Tags
Runtime256
Power Tags
Runtime1024
Power Tags
Runtime8000
Power Tags
Runtime64,000
Power Tags
256PowerPack(128)
1024PowerPack(256)
8.000PowerPack
(1024)
64,000PowerPack
(8000)
Runtime (RT)
Options
WinCC
Dat@Monitor(Web_Client)
WinCC
ODK
WinCC
Allen BradleyDF1 serial
WinCC
ProAgent
WinCCChip cardreading function
WinCCWeb
Navigator
Software
WinCC
UserArchives
WinCC
Server
WinCC
Redundancy
512 archive tags are included in the basic system.
Date: 08.04.23File: swincc01e.7
SIMATIC HMISiemens AG 2003. All rights reserved.
SITRAIN Training for Automation and Drives
Option n
Option1
WinCC Software Protection
Installation
S I C O M P
IP C R I 2 0
S IE M E N S
WinCC
De-Installation
No DEFRAG can be performed after the licenses have been installed, since the licenses could thereby be lost. Each WinCC Version has its own authorization.
WinCC and Multi authorization
Date: 08.04.23File: swincc01e.8
SIMATIC HMISiemens AG 2003. All rights reserved.
SITRAIN Training for Automation and Drives
System Configurations
Management Level and Production Level
Corporate Management Level
Process SupervisionLevel and ProductionManagement Level
Automation Level
PC Network
LAN-Netz
SIMATIC NET
MPI (not with S5)
S5 S7
Single-user system
with PC and OP
Multi-user systemwith Server and
Client
S5/S7 S5/S7DistributedPeripherals S505 S505
...
ServerClientClient
Server / R.-ServerClientClient
Server 12Client Client Server 1 ...
SIMATIC WinAC MP
Distributed systems with
Server and Client
Date: 08.04.23File: swincc01e.9
SIMATIC HMISiemens AG 2003. All rights reserved.
SITRAIN Training for Automation and Drives
Configurations for Single-user Systems
MPI (only S7) ,SIMATIC NET PROFIBUSSIMATIC NET Industrial Ethernet
SIMATIC S5 / S7 / 505or
PLCs from other manufacturers
SIMATIC S5 / S7 / 505or
PLCs from other manufacturers
WinCC
Example 2
Coupling via Network
Example 1
Serial coupling
Point to Pointserial V.24 / TTY
DK3964R + RK512
COROS OP45
Date: 08.04.23File: swincc01e.10
SIMATIC HMISiemens AG 2003. All rights reserved.
SITRAIN Training for Automation and Drives
Multi-user System
SIMATIC NET
SIMATIC S5 SIMATIC S7-400
Terminal bus (PC Network)
SIMATIC NETIndustrial Ethernet:
(S7), S5: TF (TechnologicalFunctions)
S7: S7 Protocol
SIMATIC NET Profibus:
(S7), S5: FMS (PROFIBUS) S7: S7 Protocol
SIMATIC 505
Server
all WinCC applications
Client 1 Client 32...
Red. Server
all WinCC applications
Note: This WinCC configuration is also used for multi-configuration.
Date: 08.04.23File: swincc01e.11
SIMATIC HMISiemens AG 2003. All rights reserved.
SITRAIN Training for Automation and Drives
Red. Server
all WinCC applications
Distributed Systems / Web Technology
SIMATIC S5 SIMATIC S7-400SIMATIC 505
Server 1
all WinCC applications
Server12
all WinCC applications
Terminal bus (PC Network)
M Client 1
all WinCC applications
M Client 32
all WinCC applications
...
WinCC Web Client
WinCC Web Server
-Technological distribution-Functional distribution-Load distribution
SIMATIC NET
Date: 08.04.23File: swincc01e.12
SIMATIC HMISiemens AG 2003. All rights reserved.
SITRAIN Training for Automation and Drives
The Architecture
WinCC Explorer
Sys
tem
Co
ntr
olle
r
. . .
Data Manager
CS
Text-Libaray
RT
CS
Access Protection
RT
S7S5
CS
Tag ManagementProcess Data
RT
CS
RT
AlarmLogging Option
RT
CSCS
Graphics
RT
CS
RTReportDesigner
CS
RTGlobal Scripting
CS
RT
TagLogging
RT .mdf
.mdfMS 2000SQL-Server
Date: 08.04.23File: swincc01e.13
SIMATIC HMISiemens AG 2003. All rights reserved.
SITRAIN Training for Automation and Drives
Openness
SIMATIC NET
OPC Server
Graphics
Trend
Alarm
UserPrograms
ManagementAnalysis
Optimization...
API
Report
Data Manager
OPC Net Server
OPC Client
Network
WindowsApplications
ExcelWord
AccessPowerBuilder
...
ODBC/SQLOLE DB(ADO)
DDE
OLEOCX
Active X
OPC
Date: 08.04.23File: swincc01e.14
SIMATIC HMISiemens AG 2003. All rights reserved.
SITRAIN Training for Automation and Drives
Your regional partner in the region/worldwidehttp://www3.ad.siemens.de/partner/
Product Support
Customer Support
Using aSIMATIC AV Card(if “in a hurry“)
Guaranteed response time< 2 hours24h support on weekdays
0180 5050 222Fax - 223Basic Support(Free Connect)
0911-895-7777Fax -7001Premium Support(Fast Connect)More than 70 specialists are handling your
inquiries
A&D on the Internet: http://www.ad.siemens.de/support
then link to Product Support
Questions about authorization of software products: 0911-895-7200
Automation & Drives -Technical SupportYour specialists for SIMATIC, SINUMERIK, Drives, ....
DispatcherReceives your inquiry and passes it on to the
specialistsE-mail: [email protected]
No guaranteedresponse time
Principle of “first in - first out“
Weekdays (Mo. - Fr.)from 8:00 - 17:00
selection
Questions on
of products and systems ?
handling
Questions on
products and systems ?handling