a generic office without the wisenet system a generic office with the wisenet system

A GENERIC OFFICE WITHOUT THE WISENET SYSTEM

A GENERIC OFFICE WITH THE WISENET SYSTEM

WHAT THE WISENET SYSTEM CONSISTS OF

Gateway / Server / Wireless Network Manager

Router Repeater / Mesh Node

Sensor / Activity Counter / Star Node

The Gateway or PAN Coordinator automatically discovers and manages the Router Repeaters and Sensors that are designated to be part of the Network. The Gateway only communicates directly with the Router Repeaters.

The Router Repeaters communicate with the Sensors and receive the actual counts of activity at each individual Workstation or Position. They in turn forward that data to the Gateway. Each Router Repeater can support a maximum of 32 Sensors, 20 is optimal.

The Sensors are installed at each work position to be measured and forward their activity counts to the Router Repeaters which in turn forward that data to the Gateway where it is stored for daily transmission over the Internet to the Abintra Wisenet client application. The data can be shared with other applications using the site IT Infrastructure.

WISENET IS A FULLY AUTONOMOUS, SELF HEALING DISCREET WIRELESS MESH NETWORK

•Installation takes place during unoccupied periods•Sensors are mounted under work surfaces•Router Repeater Mesh Nodes connect to power outlets•Gateways connect to Customer IT Network

REPORTS VIA WEB PORTAL

• Data from Sensors is pushed to Router Repeaters• Data from Router Repeaters is pushed to Gateway• Data from Gateway is pushed to Abintra Client Application

Site Firewall

Abintra Client App

TECHNICAL POINTSQ Can the Abintra Wisenet Wireless Network interfere with other wireless infrastructure in our facility ?

A No, the transceiver power levels are too low to affect 2.4 GHz Wi-Fi Traffic and we use continuous dynamic Frequency Hopping techniques to avoid transmitting on saturated channels.

Q Are there any health risks associated with the wireless network devices?

A No, again the power levels are significantly less than those associated with Wi-Fi or even individual cell phones.

Q What are the sensors active elements?

A The active element in the sensor is a Passive Infrared Motion Sensor that senses the human body heat wave form signature, no cameras, no microphones, and no RFID tags.

Q What type of Wireless Network is Wisenet?

A It is 802.15.4, similar to 802.11 it operates in the same 2.4 GHz RF spectrum but at highly restricted transmission intervals and power levels.

Q How is the Network secured?

A All Mesh communication traffic is in compliance with the NIST AES-197 encryption standards.

WHAT WISENET SEES

TIME: 09:50WorkstationsConference RoomTouchdown

Count241212

Occupied18120

Utilization75.0%

100.0%0.0%

Occupied

Unoccupied

66.6%16.6%25.0%

HOW DATA CAN BE USED TO EVALUATE OR AUGMENT OTHER FACILITY FUNCTIONS


Count241212

Occupied1623

Utilization

•The Meeting Room with 12 Seats was booked through the In House Event Management System for a party of 9, yet only 2 people actually used the room for most of the booked time.

FOLLOWING THE SURVEY CHANGES TO THE SPACE CAN BE MADE WITH PRECISION

58.3%0.0%0.0%


Count241212

Occupied1400

Utilization

10 MINUTE RESOLUTION PROVIDES HIGHLY ACCURATE USE RATE

79.2%0.0%8.3%


Count241212

Occupied1901

Utilization

OTHER FACTORS SUCH AS VACATION AND FIELD DUTIES CAN BE FACTORED

79.2%8.3%8.3%


Count241212

Occupied1911

Utilization

STATISTICALLY THIS CONFERENCE ROOM CAN BE CONVERTED FOR OTHER USE

83.3%8.3%8.3%


Count241212

Occupied2011

Utilization

Now that you have Utilization / Occupancy Data what else can be done with it?

• Dynamic feed forward information to Lighting Control Systems

• Dynamic feed forward information to Building Automation Systems

• Dynamic feed forward information to Security Administration

• Daily Reports to Facility Services

THESE NEXT SLIDES DEPICT HOW A DYNAMIC MEASUREMENT OF OCCUPANCY CAN BEAPPLIED TO THE CONTROL OF NEXT GENERATION LIGHTING PRODUCTS THAT ARE

AVAILABLE TODAY. CONTROL ENGINE BY EXP , LED LUMINAIRES BY TREND LIGHTING AND DYNAMIC OCCUPANCY MEASUREMENT BY ABINTRA WISENET.

Abintra Lighting Description

Points

• System diagram – type 1 – 1 fixture / driver• System diagram – type 2 – N fixtures / driver• Recommend Luminaire specifications• Recommend Driver specifications• Appendix: Other Luminaire & Driver selections

type 1 – 1 luminaire/ driverdescription

• All luminaires are Class 2 LED light fixtures• Each LED driver is paired with only one luminaire• LED drivers are located remotely• The LED driver model is dimmable• 1 wireless dimmer module dims single or multiple

LED drivers depending on resolution desired

type 1 – 1 Luminaire / Driver

DC- + DC- +DC- +luminaireluminaire luminaire

Wireless Dimmer

LED driver LED driver LED driverLine Voltage +-

1-10V or PWM or On/Off switch

Zone 1


Wireless Dimmer



Zone 2


Wireless Dimmer



Zone 3

type 2 – N luminaires/ driverdescription

• All luminaires are Class 2 LED light fixtures• Each LED driver is paired with single or multiple

luminaires• LED drivers are located remotely• The LED driver model is dimmable• 1 wireless dimmer module dims single or multiple

LED drivers depending on resolution desired

type 2 – N luminaires/ driver

DC- +

DC- +

DC- +

luminaireluminaire luminaire

Wireless Dimmer

LED driverLine Voltage+-


Zone 1

DC- +

DC- +

DC- +


Wireless Dimmer



Zone 2

DC- +

DC- +

DC- +


Wireless Dimmer



Zone 3

LED luminaire 2x2

• PN: GLT Ceiling Lighting 6060 UL• 46W, 36VDC(estimated.

Depending on the driver chosen)• 3000 LM output• Beam Angle 110°-120°• Net Weight/Gross Weight: 12.5

lbs. (N.W)• UL certified

LED luminaire 2x4

• PN: JZPL1206-B1-36V• 83W, 36VDC (estimated.

Depending on the driver chosen)

• 6000 LM output• Beam Angle 110°-120°• Dimensions:

1598L*598W*44.6H(mm)/ 47.2L * 23.6W * 1.77H inch

• Net Weight/Gross Weight: 25.5 lbs. (N.W)

• UL

• 60W• 95% high efficiency• 110~277VAC input• 3 in 1 dimming function (1~10VDC, PWM signal

or resistance)• Withstand 4kV surge, suitable for LED street

lighting• UL / CUL / TUV / PSE / CE certified• 5 years warranty

LED driver - 1 luminaire/ driver

HLG – 60H- 36B

• 100W• 95% high efficiency• 180~480VAC input• 3 in 1 dimming function (1~10VDC, PWM

signal or resistance)• Withstand 4kV surge, suitable for LED street

lighting• UL / CUL / TUV / PSE / CE certified • 5 years warranty

LED driver - 1 luminaire/ driver HVG – 100- 36B

• 320W• 95% high efficiency• 110~277VAC input• 3 in 1 dimming function (1~10VDC,

PWM signal or resistance)• Withstand 4kV surge, suitable for LED

street lighting• UL / CUL / TUV / PSE / CE certified

• 5 years warranty

LED driver - N luminaire/ driver HLG – 320H- 36B

Dimmable LED driver list

• HLG Series - B type: IP67, 3 in 1 dimming function (1~10VDC, PWM signal or resistance) – HLG-40H-XXB– HLG-60H-XXB– HLG-80H-XXB– HLG-100H-XXB– HLG-120H-XXB– HLG-150H-XXB– HLG-185H-XXB– HLG-240H-XXB– HLG-320H-XXB– XX means Voltages=12,15,20,24,30,36,42,48,54

• HVG(C) Series - B type: IP67, 3 in 1 dimming function (1~10VDC, PWM signal or resistance)– HVG-100-XXB– HVG-150-XXB– XX means Voltages=12,15,20,24,30,36,42,48,54

• HLP Series– HLP-40H-XX– HLP-60H-XX– HLP-80H-XX– XX means Voltages=12,15,20,24,30,36,42,48,54

• HLN Series - B type: 3 in 1 dimming function (1~10VDC, PWM, resistance)

– HLN-40H-XXB– HLN-60H-XXB– HLN-80H-XXB– XX means Voltages=12,15,20,24,30,36,42,48,54

• LPF Series - D type: 3 in 1 dimming function (1~10VDC, PWM, resistance)

– LPF-16D-XX– LPF-25D-XX– LPF-40D-XX– LPF-60D-XX– LPF-90D-XX– XX means Voltages=12,15,20,24,30,36,42,48,54

• ELN Series– ELN-30-XXD– ELN-30-XXP– ELN-60-XXD– ELN-60-XXP– XX means Voltages=12,15,20,24,27,48

• If dimming not required, switching power supplies can be used.

EXP Niagara Control Engine

Occupancy / Utilization Data feed forward to the local control engine from the Abintra Sensing Network.

Control Actions, On/Off, Dimming, Ambient Adjustment, Master Scheduling feed from the control engine to individual groups of LED’s.

In the example shown below in an existing facility the furniture infrastructure may not always be ideally in alignment with the existing Lighting Fixture locations. The Fixtures highlighted in red would be the Master LED Luminaire with the PWM Driver and the

associated slave LED’s would be connected by low voltage Class II cabling.

IN THIS SCENARIO ONLY 29% OF THE AREA LIGHTING NEED BE AT 100%

71% OF THE LIGHTING NEED ONLY OUTPUT AT 20%

LIGHTING ENERGY SAVINGS OF 50% DYNAMICALLY CONTROLLED

• Savings from LED vs. T8 Fluorescent 42%• Savings of 50% on LED Luminaires via Occupancy Control• Savings 8% on avoided HVAC Lighting Load Cooling

THESE NEXT SLIDES DEPICT HOW DYNAMIC MEASUREMENT OF OCCUPANCY CAN BEAPPLIED TO AUGMENT YOUR EXISTING BUILDING AUTOMATION SYSTEM PROCESSES, NOT BY DIRECTLY CONTROLLING RELATED HVAC SYSTEMS BUT BY PROVIDING HIGHER

RESOLUTION OCCUPANCY DATA TO THOSE SYSTEMS THAT SERVE THE OCCUPIED AREAS.

WHAT THE BUILDING AUTOMATION SYSTEM SEES

Typical Area Covered by a BAS Sensor Controlling a VAV Box serving 4,000 Square FeetSingle Point of Measurement

4 Deg F Above Set Point


At Set Point

2 Deg F Below Set Point




At Set Point



WHAT WISENET SEES


Because each Wisenet Sensor can be populated with a Temperature Sensor a detailed heat map of each area down to position level can be dynamically acquired.

WHAT THE FACILITY MAINTENANCE DEPARTMENT CAN NOW SEE


The air distribution ductwork downstream from the VAV Box typically has manual balancing dampers which are initially set by the contractor of record.

Over the course of time with internal equipment changes and floor layout alterations the air balance may not be adequate for the space.

Wisenet can prove to be a valuable tool to assist the Facility Maintenance personnel in solving these comfort, and ultimately productivity issues.

WHAT THE ACCOUNTING DEPARTMENT CAN NOW SEE

Section 9. from Use Case Example of 65,000 Square Foot building.

Questions

a generic office without the wisenet system a generic office with the wisenet system

Documents

network slide

wisenet system slide

router repeaters data

gateway data

unoccupied slide

wireless network devices

qwhat type of wireless

wireless infrastructure