a high quality, high specification vertical machining...
TRANSCRIPT
TurningHardinge GS 51 Turning Center
Quotation to: ABMNameAlpha Quotation Number: SOHDocumentOrderInvoice
Contact:Contact Name Address: ShipToAddressLine1
ShipToAddressLine2ShipToAddressLine3ShipToAddressLine4ShipToCity1, ShipToState, ShipToCountry
Date: Month/Day/YearPrices Valid for 30 Days
Your Hardinge RepresentativeSales Person Name
PhoneEmail
Address 1Address 2
City, State, Zip
TURNING MILLING GRINDING WORKHOLDING ROTARY
www.hardinge.com
Machine Summary and QuotationThank you for taking the time to discuss your machine requirements. After reviewing your needs, we are pleased to present the Hardinge GS 51 Turning Center as a solution to your machining requirements.
The GS 51 features Hardinge’s unique collet ready spindle allowing better part accuracy and surface finish to be obtained This machine is also available with a range of options to suit many types of manufacturing – i.e.; 3 jaw chuck, part probe, tool probe, parts catcher, C-axis/live tooling and fully programmable tailstock.
Included Features• CNC Control – Fanuc 32-Bit i-Series• Hardinge’s Unique Collet Ready Spindle • Barfeed Interface• Full Machine Documentation • Air-hose and air-gun• Custom Macro B • Manual Guide 0i (program assist)• Environmentally friendly grease lubrication • Rigid tapping• User friendly operators panel • Pendent mounted control – color display• Bright florescent work light • PCMICA flash card slot• Chip conveyor/auger interface • Run time/parts counter• Tool Kit – wrenches and grease gun• Small Tooling Package Includes
- 1” Boring Tool Holder- 1.25” Boring Tool Holder- Square Tool Holder- 9 pairs wedge clamps
Top Plate12 Station vertical block- standardUtilizes .75" square and up to 1.25" round tooling(Live tooling not available – static only)
Machine Options
Miscellaneous Options Siemens 810D Control (full lead time from factory) OptionLive Tooling/C-Axis (Fanuc) OptionLive Tooling/C-Axis (Siemens) OptionTailstock - #4 Morse Taper OptionRenishaw Part Probe OptionRenishaw Tool Probe Option Thermal Stabilization Package OptionTri-Color Light Tower Option
Chucks 8” – 3 Jaws Ton-Fou Chuck Option8” – Sure Grip Chuck Lever Type Option8” – Sure Grip Quick Change Chuck Lever Type Option
Parts Catcher Arm Type Parts Catcher with part conveyor Option
2.05” x 6” (52mm x 150mm)
Coolant and Chip ManagementChip Conveyor – Standard Hinge Type OptionChip Conveyor – Scraper Type (small fine chips) Option280psi – Thru Turret Coolant Option
Spindle LinersSpindle Liner Kit OptionSpindle Liner Bushing (4 required for each bar stock size) Option
BarfeedsBarfeed Interface (Nonmagazine/ Magazine/ Air/Hyd) StandardLNS Eco Load Pneumatic Barfeed System – ¼” to 2 ½” Capacity Option
Includes 3 pushers, 23” retractLNS Eco Load Barfeed Installation OptionLexair 6’ Mini Rhinobar .125” to 1.625” Capacity Option
Includes 3 Feed tubes in Base Price 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1 1/16", 1 1/8", 1 1/4", 1 3/8", 1 1/2", 1 5/8"
Additional Mini Rhinobar Feed Tubes OptionLexair Barfeed Installation Option
Transformers208/230 Volt Transformer (50KVA) – Option
GS Machines are wired 220 Volt 3 Phase230/460 Volt Transformer (50KVA) – Option
GS Machines are wired 220 Volt 3 Phase
Machine Specifications
Swing Diameter Maximum Swing Over Way Covers 18" (457mm)
Work Capacities Maximum Bar Capacity 2 "(51mm)Maximum Machining Diameter 11.10" (284mm)Maximum Machining Length 17.95" (456mm)
SpindleMaximum Speed 5000-rpmMaximum Power Rating (Dual Wound Motor) 15-hp (11kW) Torque at Spindle (15min) 152 ft-lb (1206 Nm)Spindle Nose A2-6, 20 CSpindle Center Height 39.40" (1000mm)Spindle Reach 11" (432mm)
Travels and FeedratesMaximum X-Axis Travel (Block) 6.02 (153mm)Maximum X-Axis Travel (VDI) 8.58" (218mm)Maximum Z-Axis Travel 16" (406mm)Maximum Z-Axis Thrust - Fanuc (1 sec.) 4,026lb (17,907N)Maximum Z-Axis Thrust - Fanuc (1 min.) 1,695lb (7,540N)X-Axis Rapid Traverse Rates 1181-ipm (30m/min)Z-Axis Rapid Traverse Rates 1181-ipm (30m/min)
Turret Top PlatesBMT
Bi-directional 12 station Square Shank .750” (20mm) Round Shank Tooling 1.250" (32mm) Rotation / Index Time .25 / 1 Second Tool Shank Dia. w/ER 25 Collets .079 - .625" (2mm - 16mm)
Fully Programmable Hydraulic Tailstock (Option) Morse Taper (no quill needed) MT # 4 Maximum Part Length with Collet
Block 17.75" (451mm) VDI 17.4” (442mm)VDI Live 17.75” (451mm)
Maximum Part Length with ChuckBlock 12.99” (330mm) VDI 12.63” (321mm)VDI Live 12.99” (330mm)
Maximum Tailstock Travel 13.42" (341mm)Maximum Traverse Rate 216 ipm (5.5 m/min)Thrust (max) 780 lb. (3,470N)
.
Coolant FacilitiesCoolant Capacity 41gallon (156 liter)Maximum Pressure 40 psi (2.8 bar)Pump Size 1.1 HP Pump Rating per min. 6.8 Gal (26L)
Accuracy Specifications (ISO 230-2) Overall Axis Repeatability (X, Z) .0001" / .0025mm
Power Requirements (Standard Configuration)Volts/Full Load Amps 220 volt/67 FLAPhase/Hertz 3-phase/50-60 Hz
Machine Specifications Con’t
MiscellaneousProgram Resolution 0.0001" (0.001mm)Machine Lubrication Grease Machine Communication RS-232-C and PCMCIA Card CapabilityMachine Length 78.66” (1,998mm)Machine Length (w/chip conveyor) 116.46" (2,958mm) Machine Depth 65" (1,650mm) Machine Height 70.12" (1,781mm) Approx. Machine Weight 6,160 lb (2,800 kg) Approx. Shipping Weight 6,959 lb (3,156 kg)
Prices list in USD - Factory installed pricing only
All features, benefits and specifications are subject to change. Hardinge Inc. is not responsible for any typographical errors, omissions or misprints.
Fanuc OiTD Control Specifications
General 8.4” Color LCD Display Two Interpolating Axis Programmable Resolution - .00001”/.001mm Tool Offset Capability - .0001”/.001mm Tool Geometry and Tool Wear Offsets
(64 pair each) Inch/Metric Data Selection by G-Code 1280 Meters (512 KB) Part Program Storage Flash Card Slot Capability (up to 128 MB)
Data Input/Output MDI (Manual Data Input) Operation Reader/Punch Interface Connection (RS-232
Software/Hardware) DNC (Remote Buffer) Embedded Ethernet
Programming Functions Absolute/Incremental Programming Additional Tool Offsets (64 Pair Total) Additional Custom Macro Variables AI Contour Control Background Editing Blueprint Programming Canned Cycles (Drilling) Chamfer/Corner Rounding Constant Surface Speed Programming Continual Thread Cutting Coordinate System Setting (G50) Custom Macro B Diameter/Radius Programming Extended Part Program Edit (Copy/Replace) Graphic Display Hardinge Safe Start Format Input of Offset Value by Programming (G10) Interpolation (Linear and Circular) Manual Guide 0i (G-code assist) Multiple Repetitive Canned Cycles I (Turning) Multiple Repetitive Canned Cycles II (Pockets) Nano Interpolation Registered Part Programs (200 total) Rigid Tapping Single Block Operation Spare M-Codes (3) Thread, Synchronous Cutting Tool Life Management
Tool Nose Radius Compensation Variable Lead Thread Cutting
Operation Block Delete Clamp/Unclamp Indicator Light Switch Coolant Control Dry Run Dwell Time Emergency Stop Feedhold Feedrate Override (0 to 150%) Incremental Jog Jog Feed Override (0 to 150%) Machine Lock Manual Pulse Generator (MPG Hand wheel) On-Screen Spindle & Axis Load Meters Option Stop Rapid Traverse Override (Low-25-50-100%) Single Block Spindle Speed and T-Code Displays on All Screens Spindle Speed Override (50 to 120%)
Miscellaneous Alarm Display English Color LCD Display with Full Keyboard
French/German, Italian or Spanish On-Screen “HELP” Functions for Alarms Program Protect Run Time and Parts Counter Self-Diagnosis Function Spindle Lock (Servo) Spindle Orient – One Degree Stored Pitch Error Compensation
GS 51 Floor Plan
Note: Inch/Millimeter measurements shown:
A – 78.66/1998B – 40.55/1030C – 70.12/1781D – 26.13/663.8
E – 26.57/675F – 37.80/960.1 G – 37.21/945H – 61.06/1551
Foundation Requirements:To maintain the accuracy of this machine, we recommend that the machine is sited on a flat area free from cracks and expansion joints. The composition of the floor and sub-structure should be of suitable construction to bear the weight of this machine. Any friable areas should be using accepted building construction techniques (to code).
Once a suitable foundation is in place, we recommend that the machine is rigidly bolted to the floor using the bed fixing/ jacking positions to prevent movement or vibration.
All features, benefits and specifications are subject to change. Hardinge Inc. is not responsible for any typographical errors, omissions or misprints.