a passion for detail - gtma · the solution from the wide range of mahr products and ... the...

32
MARCAL 16 EWRi Wireless Digital Caliper in a Starter Pack, includes MarCom Software Standard. See page 9 MARCATOR DIGITAL INDICATORS Now with switchable resolution from 0,0005 mm! See from page 17 MARCONNECT Wireless data transmission: Simple, Reliable and Professional! See from page 22 THE MAGAZINE DEVOTED TO DETAIL 1 | 2016 MARSURF PS1 - ABSOLUTE MOBILITY A lightweight mobile surface roughness measuring instrument with which fits in one hand and is no larger than a digital camera. Horizontal, vertical or upside down - the PS1 can be used in any measuring position. See page 26 A PASSION FOR DETAIL PROMOTION PRICES VALID FROM 01 APRIL TO 31 MAY 2016

Upload: phunghanh

Post on 31-Aug-2018

213 views

Category:

Documents


0 download

TRANSCRIPT

MarCal 16 EWriWireless Digital Caliper in a Starter Pack, includes MarCom Software Standard. See page 9

MarCaTOr DigiTal inDiCaTOrsNow with switchable resolution from 0,0005 mm! See from page 17

MarCOnnECTWireless data transmission: Simple, Reliable and Professional! See from page 22

ThE MagazinE DEvOTED TO DETail 1 | 2016

Marsurf Ps1 - absOluTE MObiliTyA lightweight mobile surface roughness measuring instrument with which fits in one hand and is no larger than a digital camera. Horizontal, vertical or upside down - the PS1 can be used in any measuring position. See page 26

a passionfor Detail

pr

om

ot

ion

pr

ice

s v

ali

D f

ro

m 0

1 a

pr

il t

o 3

1 m

ay

201

6

- +

2

DiMeNSioNAl MetRology

WitH exPeRieNCe, iNNovAtioN

AND DeDiCAtioN.

MAHRligHtS SPRiNg 2016

- +

3

CloSeR CooPeRAtioN WitH MeASuRAble SuCCeSS!Dear Detail enthusiasts,

a close cooperative partnership is beneficial and valuable: because together we can find the appropriate measuring solution. this means describing the measurement requirement, providing, finding, testing and implementing the solution from the wide range of mahr products and applications. to see how a close and successful cooperation works, take a look at the case study about myonic GmbH, a manufacturer of miniature ball bearings, on page 4.

Here the attention to detail decides the “µm” and a feasible measurement solution. the applications specialist mahr already has a comprehensive range of measurement solutions for precision ball bearings. the parameters to be measured, the specified tolerances and the dimensions of the measuring object are all important to find the ideal measurement solution.

for myonic GmbH the optimal solution for measuring concentricity, planarity and parallelism on ball bearing components was the compact amplifier millimar c1200 with an inductive probe.

What are your measurement challenges? thickness measurement? radial run-out? axial run-out? form testing? Be inspired by our application tips for the millimar c1200 with an inductive probe and contact us or our sales distributors – closer cooperation ensures measurable success!

We hope all those who are devoted to accuracy and passionate about detail enjoy browsing through the first maHrliGHts in 2016

viSit ouR NeWly DeSigNeD HoMePAge WWW.MAHR.CoM

MAHRligHtS SPRiNg 2016

Heiko Kern, vice President Sales Precision gages

r FOR

- +

4

MilliMAR C1200manufacturing miniature ball bearings with µm tolerances requires highly accurate measuring instruments – from the measuring probe to the display and evaluation unit. as a manufacturer of precision ball bearings, myonic GmbH is using the new millimar c1200 compact measuring amplifier in conjunction with an inductive probe for quality control. this has enabled the company to manufacture to tolerances that go beyond those specified by iso and aBec standards.

Measuring values are easy to read

myonic use the millimar c1200 in conjunction with a mahr inductive probe to test work pieces such as the outer ring of a ball bearing or the shaft of a bearing unit. employees skillfully carry out demanding measuring tasks on the tiny components, including radial run-out, flatness or perpendicularity inspection. production operators check these characteristics on the high-resolution, high-contrast 4.3“ tft color display, that can be tilted for the best viewing angle. "in comparison to previously used devices, the new and realistic depiction of an analog display on the digital

screen offers us greater convenience, user-friendly and a faster read off of the measured values", says Herbert reich, Head of testing equipment at myonic. "that is why we deliberately opted for mahr, because we have had very good experience with mahr products over many years."

fast zero setting accelerates retooling

a number of criteria were decisive for the Head of testing equipment in choosing a new amplifier: a highly sensitive pointer in the display, the user-friendly operation as well as direct access to quick functions, for example, zero setting or adjustment of the display range. also important to the company was that faster zero setting would also increase the speed of retooling.

MAHRligHtS SPRiNg 2016

MilliMar C1200: MEasuring PrECisiOn fOr MiniaTurE ball bEarings

- +

5

self-explanatory user-friendly menu guide

in the quality control department the changeover to the compact amplifier millimar c1200 is both very quick and easy. after changing the amplifier, the testing routine could be modified immediately via the self-explanatory user-friendly menu guide. as the c1200 can be operated either via a mains power supply or with batteries, it is flexible and versatile – and fully portable for use in a wide range of locations.

Cost benefits in spite of enhanced technology

in summing up the new amplifier, Herbert reich sees four significant advantages with the new c1200: "firstly, the changeover time can be dramatically reduced, secondly, the amplifier is very easy to use, thirdly, changes to the measuring process can be adopted immediately and finally the cost benefits are very attractive indeed – and all of this with upgraded and enhanced technology."

myonic – pushing the limits of feasibility

myonic GmbH is a manufacturer of miniature ball bearings, cages and systems based in leutkirch, Germany and with branch offices in the czech republic, austria and the United Kingdom. myonic has 425 employees (2013/2014) and since 2009 the company has been a part of the Japanese minebea Group, the global leader in miniature bearings. the target markets are the dental / medical industry (64 %), precision and mechanical engineering (24 %) and the aerospace industry (12 %).

internally defined quality standards demand µm tolerances, which go beyond conventional standards. these include concentricity and special machining methods for the materials used, these are required in order to optimize the interior geometry of the ball bearing. to ensure a consistently high quality standards, regular testing and inspection is necessary. myonic manufactures to very specific customer requirements, pushing the limits of what is technically feasible.

www.myonic.com

MAHRligHtS SPRiNg 2016

These dental bearings from myonic reach rotational speeds of up to 500.000 rpm. and can withstand thousands of sterilization processes.

- +

6

Millimar single measurement with one probe indicating instrument instantly displays the measured value.• Directmeasurementsonalltypesofcylindricalandplane

workpieces• UsedinthesamewayaswithIndicators,Comparators

or test indicators

MilliMARmillimar probes are the most influential components of a measurement chain, their characteristics determine the quality of the entire measurement. millimar probes are robust, versatile and attractively priced. Millimar advantages of inductive Probes

• Largelinearityrange• Insensitivetointerference• Precisemeasuringspindleandlever• Frictionlessballorspringbearingformaximumresolution

with minimum hysteresis• Highlyaccuraterepeatability,upto0,1µm• High resolution up to 0,01 µm in conjunction with

millimar amplifiers• Cable is plugged into the probe allowing quick and

simple maintenance (p1300)• Robustconstructionforuseontheshopfloor• Broadrangeofprobesforalltypesofapplications

MAHRligHtS SPRiNg 2016

radial run-out

axial run-out

Thickness measurement

MilliMar aPPliCaTiOns WiTh inDuCTivE PrObEs

- +

7MAHRligHtS SPRiNg 2016

Perpendicularity measurement

Thickness measurement form measurement of wedges or cones

Concentricity measurement on 2 shaft diameters

height difference between 2 steps

Millimar sum measurement with two probes indicates the sum of deviations (total composite error) acquired by 2 probes, irrespective of the form, support and concentricity deviation.

Millimar Difference measurement with two probes

shows the difference between the measured values acquired by 2 probes, irrespective of the absolute dimension of the test piece. this is particularly suitable for dimensional comparison of two measurement points.

Millimar C 1216 M Millimar s 1840 Millimar P 2004 M Millimar 1318

- +

8

DIN862

IP67

������������������

������� ��

Ø1,5

������������������

������� ��

Ø1,5

MARCAl. tHe ReFeReNCe CAliPeRWith the reference system from mahr the handling of a Digital caliper has become much easier and more convenient: the zero position only has to be set once, the setting is stored for all further measurements. Due

to the high degree of protection iP67 the marcal 16 eWr is protected against dust, coolants and lubricants and is therefore ideal to be used in the most demanding environmental conditions, e.g. production.

offer price

£ 93.00order no. 4103300

offer price

£ 65.00order no. 4103010

MARCAl 16 eWR Digital caliper

MARCAl 16 eR Digital caliper

featuresfunctions: on/off, aUto-on/off, reset (set display to zero), mm/inch, reference system, locK function (key lock)• Immediatemeasurementduetothereference system• Excellentresistantagainstdust,coolantsandlubricants:

Protection class iP67• power supply: Battery, life of battery ca. 3 years• lapped guide way• slide and beam made of hardened stainless steel

featuresfunctions: on/off, aUto-on/off, reset (set display to zero), mm/inch, reference system, locK function (key lock)• Immediatemeasurementduetothereference system• power supply: Battery, life of battery ca. 3 years• lapped guide way• slide and beam made of hardened stainless steel

Product Measuring range resolution Depth rod Data output height of digits Order no. Offer price

mm (inch) mm/inch mm

16 er 0 – 150 (6“) 0,01 / .0005 • 11 4103010 65.00

16 er 0 – 150 (6“) 0,01 / .0005 • 11 4103012 65.00

16 er 0 – 200 (8“) 0,01 / .0005 • • 8,5 4103018 111.50

16 er 0 – 300 (12“) 0,01 / .0005 • 8,5 4103020 142.50

oFFeR

PRiC

eS

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

Product Measuring range resolution Depth rod Data output height of digits Order no. Offer price

mm (inch) mm/inch mm

16 eWr 0 – 150 (6“) 0,01 / .0005 • 11 4103300 93.00

16 eWr 0 – 150 (6“) 0,01 / .0005 • 11 4103302 93.00

16 eWr 0 – 200 (8“) 0,01 / .0005 • • 8,5 4103068 140.00

16 eWr 0 – 300 (12“) 0,01 / .0005 • 8,5 4103070 184.00

MAHRligHtS SPRiNg 2016

large display

excellent protection against dust, coolants and lubricants

MarCal 16 eR, 200 mm, order no. 4103018

MarCal 16 eWR, 200 mm, order no. 4103068

- +

9

����������������������������IP67

Ø1,5

����������������������������IP67

offer price

£ 139.00order no. 4103400

MARCAl 16 eWRi Digital caliper

oFF

eR P

RiC

eS

featuresfunctions: on/off, aUto-on/off, HolD (storage of measured values), reset (set display to zero), preset (enter a numerical value), mm/inch, reference system, locK function (key lock), Data (Data transmission)• integrated wireless transmitter• Immediatemeasurementduetothereference system• Excellentresistantagainstdust,coolantsandlubricants:

Protection class iP67• power supply: Battery, life of battery ca. 3 years (with activated

wireless function ca 0,5 year)• lapped guide way• slide and beam made of hardened stainless steel

Product Measuring range resolution Depth rod Details Order no. Offer price

mm (inch) mm/inch16 eWri 0 – 150 (6“) 0,01 / .0005 •

Data interface: integrated wireless4103400 139.00

16 eWri 0 – 150 (6“) 0,01 / .0005 • 4103402 139.00

16 eWri 0 – 150 (6“) 0,01 / .0005 • starter Pack: incl. i-stick wireless receiver and

marcom standard 5.0

9105795 161.00

16 eWri 0 – 150 (6“) 0,01 / .0005 • 9105796 161.00

MAHRligHtS SPRiNg 2016

offer price

£ 263.00order no. 4126755

MARCAl 30 eWRi Digital Depth Gage

featuresfunctions: on/off, aUto-on/off, HolD (storage of measured values), reset (set display to zero), preset (enter a numerical value), mm/inch, reference system, locK function (key lock), Data (Data transmission)• integrated wireless transmitter• Immediatemeasurementduetothereference system• Excellentresistantagainstdust,coolantsandlubricants:

Protection class iP67• power supply: Battery, life of battery ca. 3 years (with activated

wireless function ca 0,5 year)• lapped guide way• slide and beam made of hardened stainless steel

With integrated wireless

With integrated wireless

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

furthermore, if you need to document your measured data, the MarConnect interface offers you the optimal connection to all evaluation systems either via integrated wireless or data cable.

Promotion-Setstarter Pack: incl. i-stick wireless receiver and marcom standard 5.0 see order no. 9105795 and 9105796

Product Measuring range resolution Details Order no. Offer price

mm (inch) mm/inch

30 eWri 0 – 150 (6“) 0,01 / .0005

Data interface: integrated wireless

4126755 263.00

30 eWri 0 – 300 (6“) 0,01 / .0005 4126756 324.00

30 eWri 0 – 500 (20“) 0,01 / .0005 4126757 381.00

- +

10

������������������

������� ��

IP65

MARCAl. tHe ligHt WeigHtour Digital Caliper 18 EWr has a lightweight construction due to the narrow cross section (additionally with weight reducing holes in the measuring jaws from 500 mm) for optimum handling during measurement.

the 16 EWv is the trouble shooter for all difficult to reach measuring points, for example: recesses, grooves, etc. in conjunction with specific anvils we have a solution for every measuring problem.

oFFeR

PRiC

eS

offer price

£ 279.00order no. 4112704

MARCAl 18 eWR Digital caliper

featuresfunctions: aUto-on/off, Data (Data transmission via connection cable), on/off, preset (enter a numerical value), reset (set display to zero), reference system, locK function (key lock), mm/inch• Immediatemeasurementduetothereference system• excellent resistant against dust, coolants and lubricants:

Protection class iP65• power supply: Battery, life of battery ca. 3 years• Height of digits: 10 mm (300 mm), 12,5 mm (500 mm)

Product Measuring range resolution Details Order no. Offer price

mm (inch) mm/inch

18 eWr 300 (12“) 0,01 / .0005with measuring blades for external dimensions

4112704 279.00

18 eWr 500 (20“) 0,01 / .0005 4112712 535.00

18 eWr 300 (12“) 0,01 / .0005without measuring blades for external dimensions

4112705 257.50

18 eWr 500 (20“) 0,01 / .0005 4112713 475.00

MAHRligHtS SPRiNg 2016

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

the steel lightweight

offer price

£ 19.00order no. 4100400

MARCAl 16 FN vernier caliper with scale reading

features• all reading parts have a glare free, satin chrome finish• slide and beam made of hardened stainless steel• measuring faces are made of hardened stainless steel• measuring blades for inside measurement• step measuring function• raised guides ways for the protection of the scale

Product Measuring range readings readings Error limit Order no. Offer price

mm mm inch mm

16 fn 0 – 150 0,05 1/28 0,05 4100400 19.00

the classic precision vernier caliper

MarCal 18 eWR, 300 mm, order no. 4112705

- +

11

������������������

������� ��

IP67

Ø1,5

16 Eea

16 Eei

������������������

������� ��ABSABSSystem

16 Eea

16 Eei

offer price

£ 333.50order no. 4118807

MARCAl 16 eWv Universal Digital caliper

featuresfunctions: aUto-on/off, Data (Data transmission via connection cable), HolD (storage of measured values), on/off, preset (enter a numerical value), reset (set display to zero), reference system, locK function (key lock), mm/inch• Immediatemeasurementduetothereference system• Excellentresistantagainstdust,coolantsandlubricants:

Protection class iP67• power supply: Battery, life of battery ca. 3 years• lapped guide way• slide and beam made of hardened stainless steel• scope of supply: includes standard accessories

oFF

eR P

RiC

eS

Product Measuring range resolution Depth rod Details Order no. Offer price

mm (inch) mm/inch

16 eWv 0 – 200 (8“) 0,01 / .0005 • height of digits: 8,5 mm 4118807 333.50

MAHRligHtS SPRiNg 2016

anvils for outside measurements

anvils for inside measurements

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

the trouble shooter

offer price

£ 392.00order no. 4426100

DigiMAR 814 SR Height measuring and scribing instruments

featuresfunctions: reset (set display to zero), mm/inch, aBs (switch between relative and absolute measurement), reference lock/Unlock, preset (enter a numerical value), Data (Data transmission via connection cable), aUto-on/off• life of battery up to 3 years• max. measuring speed 1,5 m/s (60”/s)• sturdy heavy-duty base, easy to handle• Hardened and lapped contact surface which produce both a

smooth and even movement• slide and beam made of hardened stainless steel• Hand crank for positioning and measuring• fine adjustment• locking screw• interchangeable scriber point, carbide tipped

Product Measuring range resolution Details Order no. Offer price

mm (inch) mm/inch

814 sr 0 – 350 (0 – 14“) 0,01 / .0005“height of digits: 12 mm

4426100 392.00

814 sr 0 – 600 (0 – 24“) 0,01 / .0005“ 4426101 713.00

exact positioning per hand

- +

12

ABSABS

������������������

������� ��

IP40 IP65

MiCRoMAR. eveRytHiNg RotAteS ARouND PReCiSioNmicrometers belong alongside calipers to the most frequently used Hand measuring instruments. With the precision ground spindle, the carbide tipped measuring faces

and a robust frame construction; the modern micrometer from the Micromar series ensures maximum precision and a long working life.

oFFeR

PRiC

eS

MAHRligHtS SPRiNg 2016

offer price

£ 122.50order no. 4151721

MiCRoMAR 40 eR / 40 eWR Digital micrometers

featuresfunctions: reset (set display to zero), aBs (Display can be set to zero, without losing the reference to the preset value), mm/inch, preset (enter a numerical value), reference system, locK function (key lock), Data (Data transmission via connection cable)• Immediatemeasurementduetothereference system• High constrast display • spindle and anvil are carbide tipped• rapid drive• Hard lacquered steel frame, heat insulated• power supply: Battery, life of battery ca. 2 years

Product Measuring range resolution spindle thread pitch Order no. Offer price

mm (inch) mm/inch mm

40 er 0 – 25 (0 –1“) 0,001 / .00005 0,635 • 4151601 98.00

40 eWr 0 – 25 (0 –1“) 0,001 / .00005 0,635 • 4151721 122.50

40 eWr 0 – 25 (0 –1“) 0,001 / .00005 0,635 • • 4151705 152.00

40 eWr set

0 – 100 (0 –4“) 0,001 / .00005 0,635 • • 4151709 812.00

offer price

£ 504.00order no. 4150000

MiCRoMAR 40 F micrometer with Dial comparator

features• adjustable tolerance markers• chrome plated steel frame, heat insulated• Retractionofthemovableanvil• Carbidetippedmeasuringfaces• Measuringspindlemadeofstainlesssteel,hardened

throughout and ground, lockable

Product Measuring range reading spindle thread pitch Measuring faces Order no. Offer price

Comparator flatness Parallelism

mm mm mm µm µm

40 f 0 – 25 0,001 0,5 ≤0,2 1 4150000 504.00

40 f 25 – 50 0,001 0,5 ≤0,2 1 4150001 602.50

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

With a ratchet for one handed operation

With the integrated Comparator measure accurately to the µm

applications:

absolute setting with the micrometer, comparative reading on the Dial comparator. ideal for testing standard precision parts.

Set of 4 Micromars 40 eWR with 4 Micrometers, order no. 4151709

- +

13

��������

��������

offer price

£ 31.50order no. 4134000

MiCRoMAR 40 A micrometer

oFF

eR P

RiC

eS

features• operating and readings parts have a glare free, satin chrome

finish• spindle and anvil are made of hardened steel, carbide tipped• Heat insulators• rapid drive with integrated ratchet• locking device

Product Measuring range reading spindle thread pitch Details Order no. Offer price

mm mm mm

40 a 0 – 25 0,01 0,5 Hard lacquered steel frame 4134000 31.50

MAHRligHtS SPRiNg 2016

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

the classical Micrometer

offer price

£ 1,152.00order no. 4190352

MiCRoMAR 44 AS self-centering inside micrometer sets

features • operating and readings parts have a satin chrome finish• spindle is made from stainless steel, hardened and ground• rapid drive with integrated ratchet• self-centering measuring head consists of 3 laterally positioned

anvils, each are offset at intervals of 120°• anvils from 12 mm are carbide tipped• from 12 mm the anvils can be used to measure to the bottom

of a bore• from 40 mm all measuring heads are made from aluminum to

reduce weight

Product Measuring range reading Error limit number of setting rings Order no. Offer price

mm mm µm Micrometers mm

44 as 6 – 12 0,001 4 3 8, 10 4190350 653.00

44 as 12 – 20 0,001 4 2 16 4190351 509.00

44 as 20 – 50 0,005 4 4 25, 40 4190352 1,152.00

44 as 50 – 100 0,005 5 4 60, 85 4190353 1,372.00

For measurement to the bottom of the bore hole

- +

14

ABSABSIP52������������������

������� ����������

������������������

������� ��

����TOL

0

ABSABS

MiCRoMAR iNteRNAl MiCRoMeteRSthe micromar 3-point internal micrometers are indipensible for rapid measurement of bore holes in any production plant. the 3 laterally positioned anvils in the measuring

heads together with highly accurate measuring force for the self-centering of the measuring instrument in the bore hole ensures reliable and accurate measuring results.

oFFeR

PRiC

eS

MAHRligHtS SPRiNg 2016

offer price

£ 1,432.00order no. 4191162

MiCRoMAR 44 eWR self-centering Digital inside micrometer sets

featuresfunctions: reset (set display to zero), aBs (set display to zero without the reference to zero beong lost), mm/inch, preset (enter a numerical value), reference system, locK function (key lock), Data (Data transmission via connection cable)• threaded connection for changing the measuring heads• self-centering measuring head consists of 3 laterally positioned

anvils, each are offset at intervals of 120°• anvils from 12 mm are carbide tipped• from 12 mm the anvils can be used to measure to the bottom

of a bore• from 40 mm all measuring heads are made from aluminum to

reduce weight

Product Measuring range reading Error limit number of setting rings Order no. Offer price

mm mm/inch µm Micrometers mm

44 eWr 6 – 12 0,001 / .00005 4 3 8, 10 4191160 1,068.00

44 eWr 12 – 20 0,001 / .00005 4 2 16 4191161 928.00

44 eWr 20 – 50 0,001 / .00005 4 4 25, 40 4191162 1,432.00

44 eWr 50 – 100 0,001 / .00005 5 4 60, 85 4191163 1,732.00

offer price

£ 1,476.00order no. 4487762

MiCRoMAR 844 AS self centering measuring pistol set, incl. marcator 1086 r

features• threaded connection for changing the measuring heads• self-centering measuring head consists of 3 laterally positioned

anvils, each are offset at intervals of 120°• anvils from 12 mm are carbide tipped• from 12 mm the anvils can be used to measure to the bottom

of a bore• from 40 mm all measuring heads are made from aluminum to

reduce weight• Digitalindicatorcanberotatedtoanydesiredmeasuring

position

Product Measuring range number of measuring setting rings indicator resolution Order no. Offer price

mm heads 44 ak mm included mm/inch

844 as 6 – 12 3 8, 10

marcator 1086 r

0,0005 / .00002 4487760 1,124.00

844 as 12 – 20 2 16 0,0005 / .00002 4487761 1,000.00

844 as 20 – 50 4 25, 40 0,0005 / .00002 4487762 1,476.00

844 as 50 – 100 4 60, 85 0,0005 / .00002 4487763 1,792.00

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

immediate measurement due to the Reference System

For rapid measurements

- +

15

oFF

eR P

RiC

eS

MAHRligHtS SPRiNg 2016

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

offer price

£ 137.00order no. 4420360

MARStAND 815 Mg indicator stand with magnetic Base

features • 3D indicator stand, can reach any position within the operating

range• easy to position, all 3 joints can been fixed into position with

just one handle• maintenance free mechanical clamping system• arm components are made of black anodized high quality

aluminum• Dial indicator holder with mount dia. 8 mm and dovetail for

test indicators• equipped with micro fine adjustment, free of backlash• very powerful on/off magnet• supply of supply: excludes indicator

Product fine adjustment range

Total height Projection (max.) v-way for shaft dia.

Magnetic force Order no. Offer price

mm mm mm mm n

815 mG

5

224 130

6 - 120

300 4420350 123.00

815 mG 316 200800

4420360 137.00

815 mG 401 280 4420370 167.00

815 mG 2 444 330 6 - 120 1000 4420380* 314.50

* Specifically designed for measuring instruments with μm-resolution

Simple fix into position with one handle

offer price

£ 314.50order no. 4420380*

- +

16

MARCAtoR PoiNtS you iN RigHt DiReCtioNDue to their versatility both Dial and Digital indicators are the most frequently applied transducers, such as our marcator series. our mechanical Dial indicators have precision gears and pinions ensuring maximum accuracy, they are also

available in shock and waterproof versions.

oFFeR

PRiC

eS

MAHRligHtS SPRiNg 2016

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

������������������

������� ��

IP52

offer price

£ 88.50order no. 4336010

MARCAtoR 1075 R Digital indicators

featuresfunctions: on/off, reset (set display to zero), mm/inch, reversal of counting direction, preset (enter a numerical value), Data (Data transmission via connection cable), locK function (key lock), aUto-on/off• High constrast lcD• lifter protection cap on the measuring spindle• power supply: Battery, life of battery ca. 3 years

Product Measuring range resolution Details Order no. Offer price

mm (inch) mm/inch

1075 r 12,5 (.5“) 0,01 / .0005“

height of digits: 12 mm

4336010 88.50

1075 r 12,5 (.5“) 0,005 / .0001“ 4336020 117.50

1075 r 12,5 (.5“) 0,001 / .00005“ 4336030 179.50

With large display

DIN878

offer price

£ 24.00order no. 4311050

MARCAtoR 810 A precision Dial indicator

features • High constrast dial face• adjustable colored tolerance markers for optimum contrast• chrome plated metal housing• lifter protection cap with dust protection function• High precision gears and pinions

Product Measuring range reading Dial dia. Details Order no. Offer price

mm mm mm

810 a 10 0,01 50 Measuring force: 0,7 - 0,13 n 4311050 24.00

the classic indicator with a lifter protection cap

- +

17

����������������������������

������������������

������� ��

����TOL

0

ABSABS

��� ��

��� ��

��� ��

��� ��

��� ��

��� ��

TOL

0

oFF

eR P

RiC

eS

MAHRligHtS SPRiNg 2016

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

offer price

£ 218.50order no. 4337620

MARCAtoR 1086 R / Ri / WR / WRiDigital indicators

featuresfunctions: on/off, reset (set display to zero), mm/inch, reversal of counting direction, preset (enter a numerical value), tol (enter tolerance limit values), aBs (Display can be set to zero, without losing the reference to the preset value), <0> (tolerance Go / no Go display mode), Data (Data transmission via connection cable), factor (adjustable), locK (lock individual keys)• High constrast lcD• operating and display unit (bezel) can be rotated 280°• lifter protection cap on the measuring spindle• immediate measurement due to the reference system• power supply: Battery, life of battery ca. 3 years

Product Measuring range resolution switchable Details Order no. Offer price

mm (inch) mm (inch)

1086 r 12,5 (.5“) 0,01 / .0005“ 4337130 174.00

1086 r 12,5 (.5“)

0,0005 / 0,001 / 0,002 / 0,005 / 0,01 mm

(.00002“ / .00005“ / .0001“ / .0002“ / .0005“)

4337620 218.50

1086 r 25 (1“) 4337621 259.00

1086 ri 12,5 (.5“)Data interface: integrated wireless

4337624 252.00

1086 ri 25 (1“) 4337625 284.00

1086 ri 12,5 (.5“)starter Pack: incl. i-stick wireless receiver and marcom standard 5.0

9106529 273.50

1086 Wr 12,5 (.5“) splash proof according to ip 54 4337640 264.00

1086 Wri 25 (1“)splash proof according to ip 54 / integrated wireless

4337143 311.00

offer price

£ 252.00order no. 4337624

Resolution from 0,5 µm and tolerance display

Promotion-Setstarter Pack: incl. i-stick wireless receiver and marcom standard 5.0 see order no. 9106529

- +

18

����������������������������

������������

���

���

MAXMIN

TOL

0MAXMINABSABS

������������������

������� ��

����

DigitAl MeASuReMeNt WitH MARCAtoRour innovative range of Digital indicators contain high precision electronic measuring systems, which enables numerous additional measuring functions without the loss of an analog display. simple to operate, the large

easy to read display and the possibility of a quick and simple data processing of all your measurement results our Digital indicators meet all requirements of a modern measuring instrument.

oFFeR

PRiC

eS

MAHRligHtS SPRiNg 2016

offer price

£ 276.00order no. 4337660

MARCAtoR 1087 R / 1087 Ri Digital indicators

featuresfunctions: on/off, reset (set display to zero), mm/inch, reversal of counting direction, preset (enter a numerical value), tol (enter tolerance limit values), maX/min (store the search for the rever-sal point), tir (maX-min) for testing concentricity and flatness, aBs (Display can be set to zero, without losing the reference to the preset value), Data (Data transmission via connection cable), factor (adjustable), locK (lock individual keys)• High constrast lcD• operating and display unit (bezel) can be rotated 280°• lifter protection cap on the measuring spindle• immediate measurement due to the reference system• power supply: Battery, life of battery ca. 3 years

Product Measuring range resolution switchable Details Order no. Offer price

mm (inch) mm/inch

1087 r 12,5 (.5“) 0,0005 / 0,001 / 0,002 / 0,005 / 0,01 mm

(.00002“ / .00005“ / .0001“ / .0002“ / .0005“)

4337660 276.00

1087 r 25 (1“) 4337661 312.00

1087 ri 12,5 (.5“)Data interface: integrated wireless

4337663 297.50

1087 ri 25 (1“) 4337665 335.00

offer price

£ 297.50order no. 4337663

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

Resolution from 0,5 µm and dynamic Max/Min functions

- +

19

IP64

������������������

������� ��

����TOL

0

oFF

eR P

RiC

eS

MAHRligHtS SPRiNg 2016

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

MilliMAR. MADe FoR PReCiSioNthe whole world of Dimensional metrology from one source; mahr. the millimar range of products comprises of perfectly matched probes and evaluation units as well as highly

precise mechanical components and customer solutions. thus, for every measuring task in length metrology we have the solution, millimar by mahr!

offer price

£ 614.50order no. 5312010

MilliMAR C1200 compact amplifier

featuresfunctions: on/off, mm/inch, reversal of counting direction, measuring range switching, tol (enter tolerance limit values), preset (enter a numerical value), factor (adjustable), Data (Data transmission)• High resolution and high contrast tft color display• the display can be continuously inclined for the ideal field of

vision• simple to operate• can be operated with batteries or from the main power supply• fully portable when battery powered• compact housing• Canbemountedonawall for stationary operation

Product Display range resolution reading Order no. Offer priceDigital analog

µm µm µm µm

c1200 ± 5000

± 5000 , ± 2000 , ± 1000 , ± 300 , ± 100 , ± 30 ,

± 10 , ± 3

0,1200 , 100 , 20 ,

10 , 2 , 0,2 5312010 614.50

offer price

£ 173.00order no. 5323010

MilliMAR P2004 M inductive probe

features• Withrotarystrokebearings• Highlinearityoverthetotalmeasuringrange• excellent electromagnetic shielding (emc)• Allprobescanbeeasilyconvertedfromaxialtoradialby

mounting a slip on cap• further standard probes are also available upon request, for

example: probes with a compressed air (pneumatic) lifter or with vacuum retraction as well as larger measuring ranges

Product Measuring range Measuring force repeability hysteresis Order no. Offer pricefw fu

mm n µm µm

p2004 m ± 2 0,75 0,1 0,5 5323010 173.00

the new generation of Display units

the Standard Probe

- +

20

SHOCKPROOF

DIN2270

SHOCKPROOF

DIN2270

MARteSt. HigHly SeNSitive MeASuReMeNtsince 1936 mahr is one of the leading global producers of test indicators. the sensitive computer-optimized shockproof mechanism of the test indicator ensures maximum relibability and precision. martest test

indicators are ideal for use in workshop conditions due the dial of the test indicators being sealed therefore they are impervious to the penetration of liquids.

offer price

£ 53.50order no. 4305200

MARteSt 800 S / Sg / SA / SgA test indicators - standard version

features• High contrast dial face, sealed with an o-ring• satin chrome finished housing with 3 integrated dovetail guide

ways• shockproof mechanism• anti magnetic• atomatic matching to sensing direction, thus ensuring error free

reading• Double lever supported in ball bearings, overload protection

provided by slip clutch• contact point wth carbide ball ø 2 mm

oFFeR

PRiC

eS

Product Measuring range reading Dial dia. length of styli Order no. Offer price

mm mm mm mm

800 s± 0,4

0,01

27,5

14,5

4305200 53.50

800 sG 38 4307200 56.50

800 sa± 0,25

27,5 4301200 63.50

800 sGa 38 4301250 71.00

MAHRligHtS SPRiNg 2016

offer price

£ 75.50order no. 4308200

MARteSt 800 SgM test indicators - for high accuracy measurement

features• High contrast dial face, sealed with an o-ring• satin chrome finished housing with 3 integrated dovetail guide

ways• shockproof mechanism• anti magnetic• atomatic matching to sensing direction, thus ensuring error free

reading• Double lever supported in ball bearings, overload protection

provided by slip clutch• contact point wth carbide ball ø 2 mm

Product Measuring range reading Dial dia. length of styli Order no. Offer price

mm mm mm mm

800 sGm ± 0,1 0,002 38 14,5 4308200 75.50

Now available with hardened mineral glass, ideal against breakage and scratching

Now available with hardened mineral glass, ideal against breakage and scratching

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

- +

21

oFF

eR P

RiC

eS

MAHRligHtS SPRiNg 2016

offer price

£ 98.00order no. 9106530

MARteSt 800 Sl / Sgl test indicators - with 2 long contact points

features• High contrast dial face, sealed with an o-ring• satin chrome finished housing with 3 integrated dovetail guide

ways• shockproof mechanism• anti magnetic• atomatic matching to sensing direction, thus ensuring error free

reading• Double lever supported in ball bearings, overload protection

provided by slip clutch• contact point wth carbide ball ø 2 mm

Product Measuring range reading Dial dia. length of styli Order no. Offer price

mm mm mm mm

800 sl± 0,25 0,01

27,541,24

9106530 98.00

800 sGl 38 9106531 106.50

SHOCKPROOF

DIN2270

offer price

£ 71.50order no. 4302200

MARteSt 800 v / vgM test indicators - vertical model

features• High contrast dial face, sealed with an o-ring• satin chrome finished housing with 3 integrated dovetail guide

ways• shockproof mechanism• anti magnetic• atomatic matching to sensing direction, thus ensuring error free

reading• Double lever supported in ball bearings, overload protection

provided by slip clutch• contact point wth carbide ball ø 2 mm

SHOCKPROOF

DIN2270

Product Measuring range reading Dial dia. length of styli Order no. Offer price

mm mm mm mm

800 v ± 0,4 0,01 27,514,5

4302200 71.50

800 vGm ± 0,1 0,002 38 4302250 95.00

Now available with hardened mineral glass, ideal against breakage and scratching

Now available with hardened mineral glass, ideal against breakage and scratching

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

Promotion-Setincludes an additional ruby contact point dia. 2 mm

- +

22

����������������������������

RS232C ������

����������������������������

tHe giANtS oF DAtA tRANSMiSSioNin modern production it is imperative that measuring results are recorded and evaluated. these results are not only valuable benchmarks for assessment but can also be used to evaluate the products as well as

evaluating and optimizing the production processes. mahr offers not only an up-to-date solution to data transmission but the highest standard of wireless data transmission. Our aims: simple, reliable and Professional!

oFFeR

PRiC

eS

MAHRligHtS SPRiNg 2016

offer price

£ 55.00order no. 4102220

MARCoNNeCt i-Stick Wireless receiver for measuring instruments with integrated wireless

features• measure without any troublesome additional external modules• large freedom of movement• secure and simple data transmission• long battery life span• inexpensive• SuppliedwithSoftwareMarComStd.5.0

Product i-sticknumber of channels 3number of connectable devices with integrated Wireless 1 per stick 8 per stickradio frequency Mhz 2400for measuring instruments MarCal 16 eWri / 30 eWri

MarCator 1086 ri / 1087 ri / 1087 BriOrder no. 4102220 4102222scope of supply i-stick + MarCom standard i-stick + MarCom ProfessionalOffer price 55.00 205.00

Product marcom professional 5.0number of connected wireless receivers i-stick 4number of connectable devices with integrated Wireless 32number of connected wireless receivers e-stick 1number of connectable sender modules for the e-stick 8number of connected wireless receivers fM 2 1number of connectable sender modules for the wireless receivers fM 2 100number of devices to be connected with a usb interface 128number of connectable usb foot switches 128number of devices to be connected with a rs232C interface 2Order no. 4102212Offer price 180.50

offer price

£ 180.50order no. 4102212

MARCoM PRoFeSSioNAl 5.0 software-interface

features• integrated virtual interface boxes• possible to connect an sps software via a virtual interface box• freely configure the desired data transmission (e-stick, i-stick,

fm 2, UsB, rs232)• inexpensive

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

Wireless receiver i-Stick incl. Software-interface

Measuring data processing

Product Description Order no. Offer price

mc-r remote control for marcom 4102221 57.50

- +

23

������

oFF

eR P

RiC

eS

MAHRligHtS SPRiNg 2016

offer price

£ 55.00order no. 4102230

MARCoNNeCt e-Stick Wireless receiver for marconnect

features • optional wireless connection for all mahr Hand measuring

instruments with a data interface• Wireless data transmission from the measuring instrument to a pc• secure data transmission, received data is acknowledged by the

pc to the measuring instrument• compact transmitter, does not have an external antenna• extensive wireless product range• Bi-directional wireless link (remote control form measuring

instruments)

Product e-sticknumber of channels 3number of connectable sender modules for the e-stick 1 per stick 8 per stickradio frequency Mhz 2400Distance of radio wave up to 6 mfor Measuring instruments sender module 16 eWe, 2000 e, rs232 e, 1082 eOrder no. 4102230 4102238scope of supply e-stick + MarCom standard e-stick + MarCom ProfessionalOffer price 55.00 205.00

Product Description for Measuring instruments Order no. Offer price

16 eWe sender module for e-stick marcal 16 er, 16 eWr, 16 eWv, 30 eWr, 30 eWnDigimar 814 srmicromar 40 eWr, 40 eWs, 40 eWv, 44 eWr, 46 eWrmarcator 1075 r, 1086 r, 1087 r, 1087 Brmarsurf ps1

4102231 205.00

2000 e sender module for e-stick Digimar 816 clmarcator 1088 / 1088Wmillimess 2000, 2001, 2100, µmaxµm iimillimar c1200

4102232 205.00

rs232 e sender module for e-stick millimar c1208, c1216, c1245, s1840Digimar 817 clm

4102233 205.00

offer price

£ 205.00order no. 4102231

offer price

£ 205.00order no. 4102232

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

Retrofit to wireless

- +

24

������ RS232C

2D

MAHRligHtS SPRiNg 2016

ReACH out to tHe toPDigimar Height measuring instruments guarantee a maximum of both flexibility and quality. our motorized Digimar Height measuring instruments are simple to

operate, all the basic functions can be executed with a single key as well as offering a maximum of ease and accuracy.

oFFeR

PRiC

eS

offer price

£ 4,260.00order no. 4429011

DigiMAR 817 ClM Height measuring instrument

features functions:• contacting from below and above• reversal point of a bore hole / shaft (above and/or below)• Calculatedistancesand/or symmetry• Dynamice measuring functions• Measuringperpendicularity and straightness• measure in 2D mode• measuring programs• statistics• process measured data etc.Operating and display unit:• large and clearly defined function keys• easy to read background lit graphic lcD display • operator guidance with self-explanatory icons / pictograms• secure the future due to software update potential• selectable auto-off function, without loss of measured valuesMeasuring system:• excellent accuracy and reliabilty due to the optical incremental

measurement system with the double reader head • Dynamic probing system enabling high repeatability• air bearings system for light and smooth movement• Precise measuring head on stainless steel guideways• motorised measuring carriage simplifies measurement runs• probe constant remains after the instrument is switched off• Integrated rechargeable battery with a long operating time

span for mains independent measurement• Temperature compensation with an integrated temperature

sensor

Product 817 clm

Measuring range mm 0 – 350 0 – 600 0 – 1000

range of application from. . . to mm 170 . . . 520 170 . . . 770 170 . . . 1170

resolution mm 0,01, 0,005, 0,001, 0,0005, 0,0001

Error limit (1,8 + l/600) l in mm

repeatability: bore µm 1

repeatability: Plane µm 0,5

Perpendicularity error in µm µm 5 6 10

Operating time max. h 10

Measuring force n 1,0 +/– 0,2 n

Permissible relative air humidity non-condensed % 65

Working temperature °C 20

Operating temperature °C 10 – 40

Order no. 4429010 4429011 4429012

Offer price 3,848.00 4,260.00 7,180.00

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

With Quick Mode. Rapid measurement at the highest accuracy

- +

25

������ RS232C

1D

MAHRligHtS SPRiNg 2016

oFF

eR P

RiC

eS

offer price

£ 3,112.00order no. 4429031

DigiMAR 816 Cl Height measuring instrument

features functions:• contacting from below and above• widthbetweenledgeand/ordistancebetweenagrooveincl.

center of the ledge and/or groove• Diameterofaboreholeand/orshaftincl. center of the bore

hole and/or shaft • reversal point of a bore hole / shaft (above and/or below)• Calculatedistancesand/or symmetry• Dynamic measuring functions• measuring programs• process measured dataOperating and display unit:• easy to read background lit graphic lcD display• Largeandclearlydefinedfunctionkeys• Operatorguidancewithself-explanatoryicons/pictograms• Possibletosetadditionalzeropointsonaworkpiece• memory can store up to 99 measured valuesMeasuring system:• excellent accuracy and reliabilty due to the optical incremental

measurement system with the double reader head • Dynamic probing system enabling high repeatability• air bearings system for light and smooth movement• Precise measuring head on stainless steel guideways• motorised measuring carriage simplifies measurement runs• probe constant remains after the instrument is switched off• Integrated rechargeable battery with a long operating time

span for mains independent measurement• Temperature compensation with an integrated temperature

sensor

Product 816 cl

Measuring range mm 0 – 350 0 – 600

range of application from. . . to mm 170 . . . 520 170 . . . 770

resolution mm 0,01, 0,001

Error limit (2,8 + l/300) l in mm

repeatability: bore µm 3

repeatability: Plane µm 2

Perpendicularity error in µm µm 15 20

Operating time max. h 10

Measuring force n 1,0 +/– 0,2 n

Permissible relative air humidity non-condensed % 65

Working temperature °C 20

Operating temperature °C 10 – 40

Order no. 4429030 4429031

Offer price 2,780.00 3,112.00

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

Perfect for accurate measurements in production area

- +

26

������������������

������� ��

oFFeR

PRiC

eS

MAHRligHtS SPRiNg 2016

RougHNeSS WitH PReCiSioNWherever surface structures can have a influence on the function, processing or appearance of both components or products, careful examination and scrutinous testing is paramount. Top quality from Mahr, expertise and

knowhow – marsurf is the solution for all your surface metrology requirements!

offer price

£ 1,480.00order no. 9104342

MARSuRF PS 1 Set mobile roughness measurement Device incl. Ps 1-Explorer software

features• roughness standard integrated into casing • automatic selection of filter and traversing length conforming

to standards• Dynamic calibration function• individual sampling lengths and short cutoff can be selected• Phase correct profile filter (Gaussian filter) according to Din en

iso 11562, special filter according to Din en iso 13565-1, ls-filter according to Din en iso3274 (can be disabled)

• µm/µinchswitchableThe scope of supply includes:• Drive unit with a traversing length of up to 17,5 mm• Skiddedprobewithmeasuringrange350µm,2µm/90°

diamond stylus tip, measuring force 0,7 mn• Heightadjustmentaccessory,USBcable,carryingcase,charger/

mains adapter, etc.• IncludesMultilingualPS1-ExplorerPCSoftware-

document results and saving profiles on a PC• includes mahr calibration certificate

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

Automatic selection of the filter and traversing length

Product ps 1Measuring range µm 350

Parameters ra, rq, rz (ry (Jis) equivalent to rz), rz (Jis), rmax, rp, rpa (asme), rpm (asme), rpk, rk, rvk, mr1, mr2, a1, a2, vo, rt, r3z, rpc, rmr (tp (Jis, asme) equivalent to

rmr), rsm, rsk, s, cr, cf, cl, r, ar, rxstylus tip 2 µmCalibration function dynamisch, ra, rz, rsmMemory store up to max. 100 profiles, max. 140000 resultsDimensions h x W x TD 140 x 50 x 70Weight kg 1,1Measuring principle stylus methodPick-up inductive skidded pick-upMeasuring force n ca. 0,7 mnOrder no. 9104342Offer price 1,480.00

On-site surface roughness measurement during the production process

universal use on processing machinery or for incoming goods inspection

- +

27

������

oFF

eR P

RiC

eS

MAHRligHtS SPRiNg 2016

offer price

£ 2,956.00order no. 6910401

MARSuRF M 300 Set mobile roughness measurement Device

features• roughness standard integrated into casing • Automaticselectionoffilterandtraversinglengthconforming

to standards• individual sampling lengths and short cutoff can be selected• PrintingofR-profile(ISO/ASME/JIS),P-profile(MOTIF), material ratio curve, measuring record• Measuringunits(µm/µinch)andstandards(ISO/JIS/ASME/

motif) are selectableThe scope of supply includes:• evaluation unit m 300• Drive unit rD 18 with integrated roughness standard• standard pick-up pHt 6-350 / 2 µm (conforming to standards)• Height adjustment accessory, pick-up protection, 2 x UsB

cables, carrying case, etc.• includes mahr calibration certificate

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

ideal for accurate measurement in production

Product m 300Measuring range µm 350

Parameters ra, rz (ry (Jis) equivalent to rz), rz (Jis), rq, rmax, rp, rpa (asme), rpm (asme), rpk, rk, rvk, mr1, mr2, a1, a2, vo, rt, r3z, rpc, rmr (tp (Jis, asme) equivalent to

rmr), rsm, rsk, s, cr, cf, cl, r, ar, rx, rvstylus tip µm 2 µmCalibration function DynamicMemory (internal) store up to max. 40.000 results and max. 30 profilesDimensions (l x W x h) of the Drive unit mm 130 x 70 x 50Dimensions (l x W x h) of the Evaluation unit mm 190 x 140 x 75Weight of the Drive unit g ca. 300Weight of the Evaluation unit kg ca. 1Measuring principle stylus methodPick-up inductive skidded pick-upMeasuring force n ca. 0,7 mnOrder no. 6910401Offer price 2,956.00

simply scan the Qr-code and watch in the Mahr youTube-channel a video about the mobile roughness measurement marsurf m 300.

- +

28

������

oFFeR

PRiC

eS

MAHRligHtS SPRiNg 2016

MARSuRF M 300 C Set mobile roughness measurement Device

features• Automaticselectionoffilterandtraversinglengthconforming

to standards• individual sampling lengths and short cutoff can be selected• PrintingofR-profile(ISO/ASME/JIS),P-profile(MOTIF), material ratio curve, measuring record•Measuringunits(µm/µinch)andstandards(ISO/JIS/ASME/

motif) are selectableThe scope of supply includes:• evaluation unit m 300 c• Drive unit rD 18 c• Standardpick-up pHt 6-350/2µm (conforming to standards)• RoughnessstandardPRN10withaMahrcalibrationcertificate• Heightadjustmentaccessory, pick-up protection, 1 x UsB cable

(for connection to a pc), carrying case, etc.

offer price

£ 2,956.00order no. 6910431

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

ideal for accurate measurement in production

Product m 300 cMeasuring range µm 350

Parameters ra, rz (ry (Jis) equivalent to rz), rz (Jis), rq, rmax, rp, rpa (asme), rpm (asme), rpk, rk, rvk, mr1, mr2, a1, a2, vo, rt, r3z, rpc, rmr (tp (Jis, asme) equivalent to

rmr), rsm, rsk, s, cr, cf, cl, r, ar, rx, rvstylus tip µm 2 µmCalibration function DynamicMemory (internal) store up to max. 40.000 results and max. 30 profilesDimensions (l x W x h) of the Drive unit mm 139 x 26Dimensions (l x W x h) of the Evaluation unit mm 190 x 140 x 75Weight of the Drive unit g ca. 300Weight of the Evaluation unit kg ca. 1Measuring principle stylus methodPick-up inductive skidded pick-upMeasuring force n ca. 0,7 mnOrder no. 6910431Offer price 2,956.00

note: an additional seperate drive unit marsurf rD 18 c2 for transverse tracing for m 300 c is also available!

RougHNeSS WitH PReCiSioNWherever surface structures can have a influence on the function, processing or appearance of both components or products, careful examination and scrutinous testing is paramount. Top quality from Mahr, expertise and

knowhow – marsurf is the solution for all your surface metrology requirements!

- +

29

oFF

eR P

RiC

eS

MAHRligHtS SPRiNg 2016

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

offer price

£ 1,276.00order no. 9104848

MARviSioN SM 151 stereo-Zoom microscope incl. camset

features • High quality optics for light intensive and sharp 3D images• Continuouslyvariablemagnificationduetotheadjustable

zoom lens• Focusingwithanergonomichandwheel,mountedeitherside,

ideal for either a left or right handed operator• Prismheadtiltedto45°androtatablethrough360°;withthe

dioptric adjustment (54 – 76 mm)• Integratedincidentandtransmittedillumination,continuously

variable• Illumination12V/15W,incidentandtransmittedlightisvariable

offer price

£ 617.00order no. 4245001

MARviSioN SM 150 / SM 160 stereo-Zoom microscope

features• Highqualityopticsforlightintensiveandsharp3Dimages• Continuouslyvariablemagnificationduetotheadjustable

zoom lens• Focusingwithanergonomichandwheel,mountedeitherside,

ideal for either a left or right handed operator• Prismheadtiltedto45°androtatablethrough360°;withthe

dioptric adjustment (54 – 76 mm)• Integratedincidentandtransmittedillumination,continuously

variable• Illumination12V/15W,incidentandtransmittedlightis

variable (only sm 150)

Product Magnification field of view Observation tube angle

Optical tube

Working distance

max. height of test piece

Order no. Offer price

sm 150 variable 7x – 45x

28 – 5 mm 45° Binocular 105 mm 75 mm4245001 617.00

sm 160 4245003 892.00

Product Magnification field of view Observation tube angle

Optical tube

Working distance

max. height of test piece

Order no. Offer price

sm 151variable 7x – 45x

28 – 5 mm 45° trinocular 105 mm 75 mm 9104848 1,276.00

inspection of workpieces on the shop floor or in quality control laboratory

Powerful Stereo Microscope for documentation with first class optics

- +

30

tHe SeCoND DiMeNSioN iN MetRologyWith marvision optical measuring instruments, mahr offers you a quick and reliable solution to many different 2D measurement tasks – from cutting tools and precision products for the manufacturing industry and

medical technology to miniaturized electronic components. the extremely precise measuring instruments as well as efficient operating and evaluation units are the foundations to meeting your high demands.

oFFeR

PRiC

eS

offer price

£ 13,780.00order no. 4247800

MARviSioN QM 300 video Workshop measuring microscope incl. m3-software and touchscreen-pc

features • telecentric fixed lens• integrated UsB color camera• leD ring light: dimmable• leD transmitted light, dimmable• Height adjustable measuring table• automatic edge detection• automatic measurement of all features of a component within

the image field• easy program sequence due to on screen graphic guidance• automatic edge detection even with low constrast parts• operator prompts are available in various languages

Operating and display unit M3-software mit Touchscreen-PC• 23“ touchscreen with keyboard and mouse• Based on Windows 8; thus it is possible to install further software• operated via the multi-touch on the monitor or via mouse/key-

board• Largevideoimage• Target/actualevaluationwith tolerance data• protocol print out with company logo• represented graphically with dimensions• statistic (minimum, maximum, range, standard devision, 6-sigma etc.)• DXf function compares the measurement with a caD drawing

MAHRligHtS SPRiNg 2016

Product QM 300Measuring range X/y mm 32 x 24*Travel z mm 30Measuring system E2 Xy in µm µm 4,0+l/50 (l in mm)Camera system 5 megapixel UsB 3illumination: incident light leD ring lightillumination: Transmitted light leD telecentricDimensions h x b x T mm 618 x 196 x 325Order no. 4247800Offer price 13,780.00

* further sizes (57 x 42 mm, 96 x 72 mm) are availbale upon request.

accessories for microscopes see Dimensional metrology catalog, marvision - chapter 18

M3-software with Touchscreen-PCSimilar to illustration depends upon the

PC manufacturer)QM 300

Punched parts Gears Rubber seals / rings

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

Direct comparision with the CAD contours

Example of work pieces:

- +

31

offer price

£ 15,044.00order no. 4247601

MARviSioN MM 420 Workshop measuring microscope with image processing

features• integrated color camera• Zoom lens, optionally motorized• leD ring light: 1 ring and 4 segments, individually switchable

and dimmable• leD transmitted light: dimmable• solid granite base• sturdy steel Xy cross table, precision-mounted• Quick and fine adjustment of axes• optical incremental measuring system for outstanding accuracy

and reliability• laser pointer for position finding

Operating and display unit M3-software mit Touchscreen-PC• 23“ touchscreen with keyboard and mouse• Based on Windows 8; thus it is possible to install further software• operated via the multi-touch on the monitor or via mouse/key-

board• Largevideoimage• Target/actualevaluationwith tolerance data• protocol print out with company logo• represented graphically with dimensions• automatic edge detection, even on low-contrast parts• statistic (minimum, maximum, range, standard devision, 6-sigma etc.)• stiching (stiching of several single pictures (rectangle stiching,

open stiching)

MAHRligHtS SPRiNg 2016

applications:

• measurement and evaluation functions (points, lines, circles, angles, distances, intersecting straight lines, etc.) by automatic edge detection e. g. with precision punched and bent components, plastic parts as well as circuit boards.

M3-software with Touchscreen-PC

Similar to illustration depends upon the PC manufacturer)

MM 420

all illustrations and technical data are without guarantee. all list prices are the recommended retail prices. the net prices are shown in £, they exclude value added tax and are valid from 01.04.2016 until 31.05.2016

Simple but very powerful measuring functions

oFF

eR P

RiC

eS

accessories for microscopes see Dimensional metrology catalog, marvision - chapter 18

Product mm 420Objective fixed Zoom motorized ZoomMagnification mm select either 40x, 60x, 100x 0,7x - 4,5x 6,5:1Measuring range X/y mm 200 / 100Travel z mm 150 / (350 with optional extensions)size of table mm 370 x 210Maximum table load kg 20Measuring system built-in incremental scaleMeasuring system - resolution µm 0,001Measuring system - E1 X/y in µm 1,9 + (l/100)Measuring system - E2 Xy in µm 2,9 + (l/100)Working distance ca. mm from 65 - 85 (according to options)Maximum object height mm from 80 up to 280 (according to options)illumination leD incident and transmitted light, adjustableDimensions h x W x D mm 700 x 480 x 430 700 x 650 x 550 700 x 650 x 550Order no. 9106534 4247601 9106535Offer price 13,776.00 15,044.00 16,152.00

www.mahr.com

Mahr gmbhstandort Esslingenreutlinger straße 48, 73728 esslingentel. +49 711 9312 600, fax +49 711 9312 [email protected], www.mahr.com

Margear MarSolution MarSolution MarSolution Services

MarForm Precimar Precimar Precimar MarShaft

Millimar Digimar Marvision MarSurf

MarSurf MarSurf MarSurf MarSurf MarForm

Precision gages

© by mahr GmbH

We reserve the right to make changes to our products, especially due to

technical improvements and further developments. all illustrations and

technical data are therefore without guarantee. all list prices are the

recommended retail prices. the net prices are shown in £, they exclude value

added tax and are valid from 01.04.2016 until 31.05.2016

Mahr u.K. Plc

19 Drakes mewsmK8 0er crownhill, milton Keynes, United Kingdom

tel.: +44 1908 [email protected]

3722

860-

02.2

016