a practical introduction to open source cfd with code saturne … · · 2017-10-20open source cfd...
TRANSCRIPT
Open Source CFD Trainingwww.renuda.com
Renuda UK is delighted to announce the first in a series of London based Open Source CFD training courses on the 5th and 6th of July 2017.
Seats are limited to ensure that delegates gain maximum value from the practical simulation exercises.
Refreshments and lunch will be provided.
www.code-saturne.org www.salome-platform.org
A practical introduction to open source CFD with
Code_Saturne and SALOME
Based around the general CFD solver, Code_Saturne, and the suite of pre and post-processing tools, SALOME, the course covers:
Fundamentals of CFD and
recommended best practices for CFD
analysis
Presentation of the chain of open-
source tools to carry out a full CFD
analysis:
- CAD
- Meshing
- Setting up a physical and
numerical model and solving
- Visualisation and analysis
Practical application tutorial
The objective of the course is to enable participants to undertake a complete CFD cycle, from CAD generation to results analysis using the following open source software:
SALOME - geometry generation, meshing, results visualisation and analysis
Code_Saturne - simulating the fluid flow and heat transfer
To register please contact Robert Hillhouse+44 (0) 20 8785 0986 [email protected]