a range of copper capillary soldering and brazing fittings
TRANSCRIPT
• Available in sizes 6-54mm.
• Suitable for connecting copper tubes inaccordance with EN 1057.
• Designed for soldering and brazingapplication with the exception of unionfittings with copper tail, which cannot be brazed.
• Manufactured with copper and gunmetalwhich are immune to dezincification.
Features and Benefits:
A range of copper capillary soldering and brazing fittings.
Conex Delcop End Feed fittings (Silver brazing)
Size (mm)
Working Pressure (bar)-20° to 110°C 150°C 200°C
6 79.1 67.3 35.68 57.9 49.2 26.110 45.7 38.8 20.512 37.7 32.0 17.015 35.1 29.8 15.818 33.3 28.3 15.022 30.6 26.0 13.828 23.8 20.3 10.735 21.1 17.9 9.542 19.3 16.4 8.754 16.3 13.9 7.3
Series 4000 RangeSlip Coupler
DC600From: 15mmTo: 54mm
Straight Coupler
DC601From: 6mmTo: 54mm
Reduced Coupler
DC601RFrom: 8 x 6mmTo: 54 x 42mm
Imperial to MetricAdaptor
DC601IMFrom: 1/2" x 15mmTo: 1" x 28mm
Tap Connector
DC601TCFrom: 15 x 1/2"To: 22 x 3/4"
45º Elbow
DC606From: 15mmTo: 54mm
90º Elbow
DC607From: 6mmTo: 54mm
Reduced Elbow
DC607RFrom: 22 x 15mmTo: 28 x 22mm
Slow Bend
DC607LTFrom: 10mmTo: 54mm
Bent Tap Connector
DC607TCFrom: 15 x 1/2"To: 22 x 3/4"
Tee - Equal
DC611From: 6mmTo: 54mm
Female Elbow
DC7073From: 15 x 1/2"To: 35 x1.1/4"
Tee- Reduced Branch
DC611RBFrom: 15 x15 x10mmTo: 54 x 54 x 42mm
Tee - Reduced End
DC611REFrom: 22 x 15 x 22mmTo: 42 x 28 x 42mm
Tee - Reduced End & Branch
DC611REBFrom: 15 x 10 x 10mmTo: 42 x 35 x 35mm
Tee - Reduced Both Ends
DC611REEFrom: 15 x 15 x 22mmTo: 28 x 28 x 35mm
End Cap
DC617From: 8mmTo: 54mm
Straight Union CopperTail
DC633
Size: 15mm
Straight Union Cone
DC633UAFrom: 22 x 1"To: 28 x 1"
Full Cross Over
DC636From: 15mmTo: 22mm
Part Cross Over
DC636AFrom: 15mmTo: 22mm
Return Bend
DC639From: 15mmTo: 22mm
Extended Elbow
DC640
Size: 22mm
Gas Meter Union
DC690MUFrom: 22 x 1"To: 28 x 1"
Air Vent Coupler
DC701DFrom: 15mmTo: 22mm
Female StraightConnector
DC703From: 15 x 1/2"To: 54 x 2"
Air Vent Elbow
DC705DFrom: 15mmTo: 22mm
Male Straight Connector
DC704From: 15 x 1/4"To: 54 x 2"
Female Wall PlateConnector
DC708From: 15 x 1/2"To: 15 x 1/2"
Tee - Reduced End
DC711
Size: 35 x 15 x 35mm
Pitcher Tee
DC711PFrom: 22mmTo: 54mm
Tee - with FemaleBranch
DC712From: 15 x 15 x 1/2"To: 35 x 35 x 1/2"
Tee with Female End
DC714From: 15 x 1/2" x 15To: 28 x 1/2" x 28
Air Vent Plug
DC716DFrom: 15mmTo: 15mm
Union Coupler
DC733From: 15mmTo: 35mm
Tank Connector
DC750AFrom: 15 x 1/2"To: 28 x 1"
Tank Connector
DC750BFrom: 15 x 1/2"To: 54 x 2"
Cleanout Fitting & Plug
DC816From: 35mmTo: 54mm
Cleanout Fitting & PLugFlush Fitting
DC816SFrom: 35 x 3/4"To: 54 1.1/2"
Fitting Reducer
DC6012From: 8 x 6mmTo: 54 x 42mm
Fitting Reducer
DC6012LFrom: 15 x 10mmTo: 15 x 10mm
Imperial to MetricAdaptor
DC6012MFrom: 3/4" x 22mmTo: 1" x 28mm
45º Street Elbow
DC6062From: 15mmTo: 54mm
Street Bend
DC6072From: 10mmTo: 54mm
Bent Union
DC60763From: 28 x1"To: 28 x1"
Wall Plate Elbow
DC70725From: 15 x 1/2"To: 22 x3/4"
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
06/13