A Solution For Checking Anodes

A Probable Solution For Checking Anodes Presented by- Rajesh Kumar Behera

Anode Rejection Criteria

THE DISTANCE BETWEEN THE POINT 1 & 2 ON BOTH SIDES WILL NOT BE EQUAL IFTHE STEM IS BENT OR2.PINS HEIGHT ABOVE CASTING ARE DIFFERENT

12

By LASER DISTANCE MEASURING DEVICEJust keeping the device at point 2, it is pointed exactly at point 1 on both sides. If LHS reading = RHS reading, then it is OK.

So how to measure that distance???

Measurement range0.05 50 mLaser class2Measurement accuracy 1.5 mmMeasurement time< 0.5 sMeasurement time max.4 sPower supply2 x 1.5 V LR03 (AAA)PriceRs. 5000Weight approx.0.14 kgUnits of measurementm/cm/mm

Typical Specification

BENEFITS

OTHER BENEFITS

Thank youPlease give your valuable suggestion and feedback