a step ahead in digital television dm-16 digimax · a step ahead in digital television dm-16...
TRANSCRIPT
EXPERT SYSTEM
A STEP AHEAD IN DIGITAL TELEVISION
DM-16 DIGIMAX CATV & TV-SAT Signal Analyzer
RECO
GNIZES
AND S
ELEC
TS A
UTOMAT
ICAL
LY
THE AN
ALOGUE
AND D
IGIT
AL T
V SI
GNALS
IN M
EASU
REMEN
T AN
D SPE
CTRU
M MODE
MULT
ILANGUAGE
SUNLIGHT-PROOF
UN PASSO AVANTI NELLA TELEVISIONE DIGITALE
�
EXPE
RTSYSTEM
SUPPLIED WITH A STRONG BAG FOR TRANSPORTATIONAND STORAGE
COMPLETELY PROTECTED
LIGHT, COMPACT & HD
• 4 HOURS USING THE SOLE GRAPHIC DISPLAY• 2 HOURS USING THE GRAPHIC AND TFT DISPLAYS• CAR BATTERY CHARGER SUPPLYED• UNIVERSAL MAINS BATTERY CHARGER: 110/230
VAC WITH INTERCHANGEABLE PLUG OR WITH A MAINS STANDARD CABLE
GREAT AUTONOMY
MAXIMUM SECURITY AND VISIBILITY
HANDS FREE
• FITS ON ONE HAND (ONLY 2,5 KG) • HIGH RESOLUTION TFT DISPLAY 960 X 240 PXL.
• NEW LED DISPLAY HIGH BRIGHTNESS LOW CONSUMPTION
SAFETYCOMFORTDESIGN
UN PASSO AVANTI NELLA TELEVISIONE DIGITALE
�
• SUGGESTED LEVELS AND VALUES PRINTEDIN THE CARRYING BAG SUN SHIELD
VISIBLE and INSTRUCTIVE
• 4 HOURS USING THE SOLE GRAPHIC DISPLAY• 2 HOURS USING THE GRAPHIC AND TFT DISPLAYS• CAR BATTERY CHARGER SUPPLYED• UNIVERSAL MAINS BATTERY CHARGER: 110/230
VAC WITH INTERCHANGEABLE PLUG OR WITH A MAINS STANDARD CABLE
GREAT AUTONOMY UNBREAKABLE
STRONG PROTECTIVE RUBBER.SHOCK-PROOF, DUST-PROOF & RAIN-PROOF FRONT PANEL
TWO DISPLAYS IS BETTER THAN ONE
FULLY READABLE ALSO IN DIRECT SUNLIGHT
SAFETYCOMFORTDESIGN
UN PASSO AVANTI NELLA TELEVISIONE DIGITALE
�
SIMPLE, INNOVATIVE, AUTOMATIC
EXPERT SYSTEM
AUTO MEMORY
SELECTS AND MEMORIZES AUTOMATICALLY ALL THE ANA-LOGUE AND DIGITAL DVB-T, DVB-C AND DVB-H TELEVISION
PROGRAMMES IN THE MEMORY PLANS
AUTO BARSCAN
33 CHANNELS (100 MAX.) BARS DISPLAY.GREEN: DIGITAL channel power measurement
YELLOW: ANALOGUE channel level measurement
AUTO DISCOVERY
RECOGNIZES AND SELECTS AUTOMATICALLY THE ANALOGUE AND DIGITAL TV SIGNALS IN MEASUREMENT AND SPECTRUM MODE
DVB-T-C & H PAL-SECAM-NTSC
NOISE MARGIN AND QUALITY: FAIL - MARGINAL - PASS
AUTO QUALITY
EXPERT SYSTEM
UN PASSO AVANTI NELLA TELEVISIONE DIGITALE
�
SIMPLE, INNOVATIVE, AUTOMATIC
EXPERT SYSTEM AUTO SATELLITE
AUTO SPECTRUM
AUTO DUAL LNB
TWO SATELLITES, SIMULTANEOUS DISH ALIGNMENT:
NOISE MARGIN AND QUALITY: FAIL - MARGINAL - PASS
AUTO QUALITY
OVER 49 SATELLITES AND 1500 TRANSPONDERS PRE-MEMORIZED: name and orbital position, frequency,
polarization, band, DiSEqC, symbol rate, FEC,Internet updatable
AUTOMATICALLY SELECTS THE REFERENCE LEVEL & ATTENUATORS. PROVIDES: network name, the DVB-S standard and the “MW” and “IF” frequency in MHz simultaneously
EXPERT SYSTEM
INPUT 1 = H. BIRD 13°INPUT 2 = ASTRA 19°
UN PASSO AVANTI NELLA TELEVISIONE DIGITALE
�
EXPERT SYSTEM
ZOOM FOR DIGITAL SIGNALS AVERAGE POWER MEASUREMENTS NETWORK PROVIDER DATA: name, bouquet, programme, date, orbital position, TSID, NID
ALL MEASUREMENTS ON ONE DISPLAY
ZOOM FOR QUALITY AND NOISE MARGIN MEASUREMENTS: COLOR BAR = FAIL-MARGINAL-PASS
THE POWER OF SIMPLICITY
ONE KEY
UN PASSO AVANTI NELLA TELEVISIONE DIGITALE
�
NETWORK PROVIDER DATA: name, bouquet, programme, date, orbital position, TSID, NID
ZOOM FOR BER MEASUREMENTS: BEFORE AND AFTER VITERBI
IMPULSE RESPONSE FOR DVB-T AND DVB-H CHANNEL INTERFERENCE ANALYSIS
COFDM CONSTELLATION DIAGRAM
THE POWER OF SIMPLICITY
ALL MEASUREMENTS
UN PASSO AVANTI NELLA TELEVISIONE DIGITALE
�
MORE MEMORY• N. 49 Pre-memorized satellites• N. 1500 Pre-memorized SAT transponders• Over 1900 automemory TV and SAT progr. storable• Over 1900 manual TV, SAT and RADIO progr. storable• Worldwide standard canalizations (Master plan)• Multi-standard: B, G, I, K, M (French L opt.)• 99 Data loggers plans for automatic measurements
storage
MORE ACCURACY• 1dB typ Accuracy (2 dB max at the operating
temperature limits)• Extended temperature operating range
-10°/+55° (max -55° after 5’ warm-up)• Rf and IF components with HW temperature
compensation• Other various circuits with SW temperature com-
pensation
MORE AUTOMATIC• SYNCH-TV compression measurement (only Q version)• SMATV and CATV Test: automatic pass and no pass
on memory channel plan• Network name always displayed in measurement
and spectrum mode• Simultaneous picture and services list, encryption
and audio/video PIDS on two displays• HELP FUNCTION
FASTER• SAT and TV: direct frequency selection
through numerical keyboard• SAT: direct transponder number Navigation
(network name only for HBIRD and ASTRA)• TV: automatic direct channel navigation• SAT Simultaneous double frequency displayed: IF: 930-2250 MHz. MW: 10680-12850 MHz
MORE FUNCTIONS• Multi-language: Eng, Fra, Ger, Spa, Ita• Diseqc 2-4-8-12-16 cables• SCR Ready (Unicable)• DiSEqC motor driver• 3 Transponders high precision SAT Finder• DUAL LNB: multi-feed SAT alignment• 7 Freq. SAT if test (ICT) (Spain & Portugal Q. vers.)• Buzzer can be enabled for several measurements
MORE PERFORMING• 32 BIT/100 MHz A.R.M. Microprocessor• Measurements: aBER, bBER, MER, SNR, EVM,
PER, Noise Margin, C/N, Impulse Response, • Constellation with x2 and x4 zoom function• Accurate spectrum analysis with Peak Memory• HD and MPEG 4 video decoder (4HD version
only) optional
MORE.........
MORE.........• Possibility to power off the TFT display to double
the battery duration• USB port to interface a PC and for SW up-grade• Interchangeable RF input connector: F, IEC, BNC, N• Shock-proof, Rain-proof, Dust-proof, Alluminium
housig• SCART Socket A/V IN/OUT
• AUTODISCOVERY • AUTOSCAN• AUTOSPECTRUM • AUTOBARSCAN• AUTOSATELLITE • AUTOMEMORY• AUTO DUAL LNB
* optional
UN PASSO AVANTI NELLA TELEVISIONE DIGITALE
�
OPTIONS 2007
• DVB-S2 consumer Europe• DVB-S2 ACM + DUAL T. S. Europe• ECOSTAR 8PSK consumer USA * S2 consumer included in Q and 4 HD models
“8PSK” DEMOD.*
• QAM annex “A” DVB-C for EUROPE & ASIA• QAM annex “B” J83 DOCSIS for USA * Included in “Q” and “4HD” models
“QAM” DEMOD.*• ATSC for USA, KOREA, TAIWAN
“8VSB H.D.” DEMOD.
• DVB-H 4 K Europe
“DVB-H” DEMOD.
• Secam “L” FRANCE (audio AM and CROMA)• Secam RUSSIA (audio FM and CROMA) * Included in “Q” and “4HD” models
ST. SECAM*
• MEDIAGUARD• VIACCESS• IRDETO• CONAX
• CRIPTOWORK• BETACRIPT• KEYFLY
DIRECT CONDIT. ACCESS SYST.*CONDITIONAL ACCESS WITHOUT C.I.
• MPEG 2 SD Europe• MPEG 2 HD Europe (and USA ATSC)• MPEG 4 SD Europe• MPEG 4 HD Europe
“MPEG 2 & 4 H.D.” DECOD.
• DMB-T digital terrestrial TV-CINA• DMB-H mobile phones CINA
“DMB-T & H” DEMOD.
* Included in “4HD” models
UN PASSO AVANTI NELLA TELEVISIONE DIGITALE
10
SYSTEM MONITOR ACQUISITION and REPORTING TOOL
S .M.A.R.T.
• Data logger download• Firmware upgrade• Measurement display storage and printout• Generates custom memory plans reparts• Export files in Excel* format• TV memory plans upload• SAT transponders update * Excel is a Microsoft trademark
UN PASSO AVANTI NELLA TELEVISIONE DIGITALE
11
SUNLIGHT-PROOF
DVB–SQPSK
DVB-S28PSK(Mod. Q)
DVB-T-HCOFDM
DVB-CQAM(mod. Q)
MPEG4 H.D. DECODER*
MPEGDECODER
4 hBATTERY
in Measure and Spectrum
2,5 KgONLY
2,5 Kg - HIGH RESOLUTION TFT DISPLAY 960 x 240 pxl
DIRECT CONDITIONAL
ACCESS*
* optional
EXPE
RTSYSTEM
DM16 DIGIMAXCOMBINED SAT-TV ANALYZER for ANALOG & DIGITAL QPSK-COFDM & QAM SIGNALS.
SUITABLE for CATV & SMART D.T.H. DISTRIBUTION SYSTEMS. (4(47)-2250 MHz) (5 (30)-126 dBµV) Accuracy 1 dB typ.
UN PASSO AVANTI NELLA TELEVISIONE DIGITALE
1�
MAIN MEASUREMENT SCREENMEASUREMENTS: MER – EVM – NOISE MARGIN – QUALITY (BER and LEVEL pag. 14)
GRAPHIC DISPLAY “SAT” MEASUREMENTS EXAMPLES
AUTOMATIC SAT SPECTRUM VISIONSPECTRUM ANALYSIS with PEAK MEMORY (MAX HOLD)
C O U N T R Y / S A TC U S T O M P L A NA U T O S C A N
CHAN/TRANSP.P R O G . N A M EC H A N / P R O G .
F R E Q U E N C YM H z
NETWORKN A M E
ORB I TP O S I T
ENCRYPT ULCK
LCK
BATTERY SCR
TV
SAT
AN
DIG
SATELLITE PLAN/NAME
and Orbital Position
NOISE MARGIN: Noise Margin measurement both
numerical and with the linear bar and relative peak memory. This va-lue must always be more than 3 dB
M.E.R. MODULATION ERROR RATIO: Global measurement of the signal
quality includes: noise, distorsions, interferences and SKEW adjustment
(polarization plan of the received signal). Shown both in numerical
form and with a linear bar and rela-tive peak memory. The measurement
precision is 0.2 dB and is used for fine antenna pointing, eventually
together with the BUZZER
MODULATION TYPE:QPSK SAT/
ANALOG SAT
BATTERY STATUS:~ mains connection • 45/180’ • 15/45’ • 1/15’
RECEIVEDNETWORK
NAME
ORBITALPOSITION
ENCRYPTIONTYPE
SAT S.C.R. USER N.
RECEPTION TYPE:S = SAT = ANALOG SAT = DIGITAL SAT
CLOSED LOCK = locked digital signalOPEN LOCK = unlocked digital signal
E.V.M. ERROR VECTOR MAGNITUDE: Constellation vector quality in %
MEMORY PEAK LINE
AUTOMATIC ANALYSIS OF THE RECEIVED SIGNAL QUALITY: FAIL = lock FAILEDMARG = lock PRECARIOUS PASS = lock PERFECTThis sophisticated automatic quality analysis system, eliminates all doubts about the quality of the signal received and has an excellent margin to guarantee good reception over time
TRANSPONDER No.or NETWORK NAME
(in order of frequency) MEMORYPEAK LINE
CENTER FREQUENCYof the Transponder
TRANSMISSION STANDARD:DVB=EUROPE & ASIADSS=NORTH AMERICA
C O U N T R Y / S A TC U S T O M P L A NA U T O S C A N
CHAN/TRANSP.P R O G . N A M EC H A N / P R O G .
F R E Q U E N C YM H z
NETWORKN A M E
ORB I TP O S I T
ENCRYPT ULCK
LCK
BATTERY SCR
TV
SAT
AN
DIG
AUTOMATIC REFERENCE LEVEL: The dBµV scale is automatically set
by the meter. It can be adjusted manually.
FREQUENCY MARKER: It has a 0,1 dB resolution
corresponding to the marker position
LEVEL/POWER MARKER: It has a 0,1 dB measurement
resolution corresponding to the freq. Mrk position
BATTERY STATUS:~ mains connection • 45/180’ • 15/45’ • 1/15’
POWER: Signal power value expressed in dBµV
corresponding to the Marker position
MAX HOLDFUNCTION: Activated maximum
peak memory
RECEPTION TYPE:S = SAT• = ANALOG SAT
SPECTRUM ANALYSIS CURVE: Spect. in real time with con 5 dB/Div. scale and range of more than 30 dB
MAX HOLD CURVE: Maximum peak memory reached by the signal
TRANSPONDER No.or NETWORK NAME(in order of frequency)
CENTER FREQUENCYof the Transponder
SPECTRUM SPAN:Span width in MHz
from 50/100/200/500 to FULL.
UN PASSO AVANTI NELLA TELEVISIONE DIGITALE
1�
MAIN MEASUREMENT SCREENMEASUREMENTS: MER – SNR – NOISE MARGIN – QUALITY (BER and LEVEL pag. 14)
GRAPHIC DISPLAY “TV” MEASUREMENTS EXAMPLES
AUTOMATIC TV SPECTRUM VISIONSPECTRUM ANALYSIS of an ANALOG TV CHANNEL with an ADJACENT DVB-T CHAN
C O U N T R Y / S A TC U S T O M P L A NA U T O S C A N
CHAN/TRANSP.P R O G . N A M EC H A N / P R O G .
F R E Q U E N C YM H z
NETWORKN A M E
ORB I TP O S I T
ENCRYPT ULCK
LCK
BATTERY SCR
TV
SAT
AN
DIG
AUTOMATIC REFERENCE LEVEL: The dBµV scale is automatically set
by the meter. It can be manually adjusted in 10
dB steps.
LEVEL/POWER MARKER: It has a 0,1 dB measurement
resolution corresponding to the frequency Marker position
BATTERY STATUS:~ mains connection • 45/180’ • 15/45’ • 1/15’
LEVEL/POWER: The signal level is expressed in dBµV and corresponds with the Frequency Marker position
RECEPTION TYPE: T = TERRESTRIAL• = Analog TV/RADIO
SPECTRUM ANALYSIS CURVE: Spectrum in real time with 10 dB/Div. scale and range of more than 60 dB
FREQUENCYof the video carrier if the signal is analogor Center Channel if it is DVB-T–H-C
FREQUENCY MARKER: 0.025 MHz resolution
SPECTRUM SPAN:Span width in MHz from
2/7/10/20/50/100/200/500/VHF/UHF to FULL.
CHANNELname/number
C O U N T R Y / S A TC U S T O M P L A NA U T O S C A N
CHAN/TRANSP.P R O G . N A M EC H A N / P R O G .
F R E Q U E N C YM H z
NETWORKN A M E
ORB I TP O S I T
ENCRYPT ULCK
LCK
BATTERY SCR
TV
SAT
AN
DIG
PLANName of the PLAN
or country channel plan
NOISE MARGIN: The noise margin is shown both
numerically and with a linear bar and peak memory. This value must
always be more than 6 dB.
M.E.R. MODULATION ERROR RATIO: Global measurement of the digital signal includes: noise, distorsions,
interferences and poor antenna alignment. Shown both numerical-
ly and with a linear bar and peak memory. The measurement has a 0.2 dB accuracy in “fine pointing” mode,
with the help of the BUZZER.
MODULATION TYPE:COFDM DVB-T & H
TV ANALOG. & RADIODVB-C & J83
(Q and 4HD vers. only)
BATTERY STATUS:~ mains connection • 45/180’ • 15/45’ • 1/15’
RECEIVEDNETWORK
NAME
ENCRYPTIONTYPE
CLOSED LOCK = locked digital signalOPEN LOCK = unlocked digital signal
S.N.R. SIGNAL/NOISE RATIO: Signal/noise ratio measurement
AUTOMATIC ANALYSIS OF THE RECEIVED SIGNAL QUALITY: FAIL = lock FAILEDMARG = lock precarious PASS = lock PERFECTThis sophisticated automatic quality analysis system, eliminates all doubts about the quality of the signal received and has a sufficient margin to guarantee good reception over time
CHANNELchannel name/number
FREQUENCYof the video carrier if the signal is analog
or Center Channel if it is DVB-T–HTRANSMISSIONSTANDARD:DVB-T: Digital Terrestrial TelevisionDVB-H: Mobile Telephon Television
RECEPTION TYPE: T = TERRESTRIAL = ANALOG. TV/RADIO = DIGITAL TV
UN PASSO AVANTI NELLA TELEVISIONE DIGITALE
1�
PLAN/SAT SELECTION MENUThe instrument stores, in its vast memory, all the main satellites and transponders worldwide (up to 99 satel-lites, 60000 transponders). These can be easily and quickly recalled, which simplifies preliminary settings and measurements. (N.B.: The meter is supplied pre-stored with all the LNB parameters regarding the varius satellites/transponders, shown in the HOME function).
LEVEL/POWER & HOME MEASUREMENT The signal level/power measurement is represented in real time and is shown with a 0.1 dB resolution, both nume-rically and by a linear bar with relative peak memory. The HOME function allows you to go directly to this screen where all the reception settings are represented: satellite, transponder, frequency, modulation, standard, polariza-tion, band, LNB 12/18V voltage, 22 KHz pulse, DiSEqC a, b, c, d, LNB L.O., symbol rate, power, battery, etc...
LEVEL/POWER & HOME MEASUREMENT The signal level/power measurement is represented in real time and shown both numerically and by a linear bar with relative peak memory. The HOME function allows you to see all the parameters: country, channel, frequency, modulation, channel band width, battery and level/power measure-ment.
BER MEASUREMENT Two BER measurements are shown: “bBER” and “aBER”. The bBER (Pre BER) measurment is the value before the Viterbi correction code, whereas the aBER (Post BER) is the value after Viterbi error correction. Both measurements are represented numerically and by a linear bar and relative me-mory peak.
SPECTRUM ANALYSISwith 200 MHz SPANExcellent spectrum vision with high-speed refresh and a dynamic range of more than 30 dB. It is possible to navigate directly by transponder or fre-quency. The reference level is automatic, but can been adjusted manually.
SPECTRUM ANALYSIS with 500 MHz SPANExcellent spectrum vision with high-speed refre-sh and a dynamic range of more than 30 dB. It is possible to navigate directly by transponder or frequency. The reference level is automatic, but can been adjusted manually.
MPEG PROG. A/V PID & ENCRYPTION LISTThe meter shows the names of the programs received and relative Audio and Video PIDs and whether they are encrypted (Yes or No). Using the Scroll function it is possible to visualise up to 64 programs. The PIDs regarding RADIO programs are shown in the “Audio PID”.
SAT POINTING with DUAL LNBThis special function allows you to point a satel-lite dish with two or more LNBs at the same time (it automatically swaps the LNB and frequency). It also allows you to adjust the relative SKEW (polarizat. plan) with a total precision of 0.2 dB.
SATELLITE FINDER FUNCTION (1st screen)This automatic function allows you to quickly align a dish on the chosen satellite, starting from the simultaneous analysis of three reference transponders, which have been chosen manually by the user. The identification of the chosen satellite is carried out by simply moving the dish in that direction. Once the satellite is locked another screen automatically appears, which is used for fine pointing.
SATELLITE FINDER FUNCTION (2nd screen)Once the required satellite has been locked, the instrument automatically goes to the second screen. From this point the data shown on the display indicates the signal quali-ty and allows you to carry out fine pointing, also acting on the polarization of the signal received (SKEW). In the lower part of the display you can also see the other ad-ditional data, such as the Network name, satellite orbital position, etc... The acoustic signal (BUZZER), automa-tically turns on to help the operator in the dish align-ment phase, so it is not necessary to look at the meter.
NETWORK IDENTIFICATION FUNCTION This function shows all the parameters iden-tified by the transponder, for example the FEC, Network Name, Bouquet Name and date.
DATA LOGGER (measurement recording)This function allows you to record, in the meter, all the measurements of the various installations. They can then be downloaded and processed using a PC, through the USB2 socket.
BER MEASUREMENT.Two BER measurements are shown: “bBER” and “aBER”. The bBER (Pre BER) measurment is the value before the Viterbi correction code, whereas the aBER (Post BER) is the value after Viterbi error correction. Both measurements are represented numerically and by a linear bar and relative me-mory peak.
QAM EMULATED MEASUREMENT (Demod. mod. Q and 4HD)
This special measurement, developped in the ROVER laboratories, allows you to measure the digital signal quality using a series of analog measurements. The measurement is based on the C/N and FLATNESS in the band under test (The obtained values are similar to those measured using a QAM demodulator). The Q and 4HD models have a complete QAM demodulator, with constellation.
CONSTELLATION DIAGRAM and RELATIVE DVB-H and T MODULATION PARAMETERSThe meter shows of the constellation of a digital si-gnal together with the main modulation parameters. It is possible to zoom and navigate in the channels. The following parameters are shown: plan, channel, zoom type, constellation, mode, no. of carriers, DVB–T or H, guard interval, hierarchy and priority, bouquet name, encryption system, etc.
MPEG PROG. A/V PID & ENCRYPTION LISTThis function allows you to download the list of received programs, to read their respective Audio and Video PIDs and see whether they are encrypted (Yes or No). Using the Scroll function it is possible to visualise up to 64 programs. The PIDs regarding RADIO programs are shown in the “Audio PID”.
AUTO SEARCH and MEMORIZATIONThis function automatically recognises both analog and digital TV channels and stores them in a plan. The scanning progress is shown during the search, especially: the scanned channel, the channels found with digital modulation DVB–T–H, the channels found with analog modulation. The automatically created plan is used to carry out the next measurements.
DATA LOGGER(measurement recording)This function allows you to record, in the meter, all the measurements of the various installations. They can then be downloaded and processed using a PC, through the USB2 socket.
BARS SCAN UP TO 100 CHANNELS BAR visualisation of all analog and digital chan-nels. It allows you to measure the level and power of signals, with up to 100 channels on one screen. The reference level is automatic, but can also be adjusted manually.
TILT MEASUREMENTThis function allows you to adjust the TILT of line am-plifiers, by showing the channels in graphic BARS and measuring the slope with high speed refreshment. It is possible to measure the video carrier, the audio subcar-rier and power up to 9 specific preselected channels. The 2 level markers position automatically on the first and last channel and the difference in level is shown.
INGRESS SPECTRUM MEASUREMENTSpectrum visualisation in the return band (“DOC-SIS up stream”) to measure disturbances (IN-GRESS). The selectable Start, Stop frequencies and frequency marker can be positioned on all the band. The “max hold” function can be activated to allow the memorization of disturbances, including impulsive and repetitive impairments.
LEAKAGE MEASUREMENTIrradiated electromagnetic field disturbance measurement (leakage), due to poor shielding of coaxial cables in a distribution network. The peak measurement is in real time, with an acoustic alarm if the pre-chosen threshold is exceeded. It is possible to select many types of antennas and different measurement distances.
GRAPHIC DISPLAY NAVIGATION and MEASUREMENT EXAMPLES
1�UN PASSO AVANTI NELLA TELEVISIONE DIGITALE
ROVER 1972/2007 35 YEARS IN BROADCASTSince its foundation in 1972, RO.VE.R. has invested both human and economical resources in technology, developing and manufacturing highly professional products to manage and control RADIO TV signals.At the beginning of the 1980’s, the laboratories of the National Italian broadcasting company RAI Radio Televisione Italiana intuitively understood RO.VE.R.’s potential and encouraged its development. RO.VE.R. started to supply RAI with equipment for re-broadcasting, satellite ground stations and micro-repeaters.Today RO.VE.R.’s Broadcast division is at the cutting edge of technology and can supply the market with:
• Advanced technology• Right-on-time, professional, customized products
(time-to-market)• After–sales technical service to guarantee a long product life
(customer satisfaction)• The Broadcast division follows the most advanced technological
developments and complies to European and world-wide standards: DVB–T, DVB–H, DVB–S, DVB–S2, DVB–C, DVB–T–H, MPEG2, MPEG4, etc.
These products are used in the TV network infrastructures and monitoring systems of the most important network operators in the field (RAI, MEDIASET, TDF, ORF, etc).
The first DVB–T (digital terrestrial) network in Italy was installed by RAI in 2004 using RO.VE.R. products. RO.VE.R.’s “CMP” receiver is a vital part of that network; it processes and provides a digital satellite signal to various digital transmitters for signal distribution. Equally important is the product developed by ROVER for
ELETTRONICA INDUSTRIAL (MEDIASET Group) to realise
the first DVB–H digital network in Italy.
Head-End, mod. “ S A S 8 0 0 ” ,
was specifically designed by RO.VE.R.
for MEDIASET and includes multiple functions in only
one 19” rack unit, for example: SAT signal reception, transport stream analysis, multi-program
signal decoding, switching to an alternative ASI input if primary stream errors are detected and the possibility of connecting via SNMP or WEB to a local or remote P. C. for monitoring purposes. More than 1400 units were installed in MEDIASET and TIM sites for the completion of the entire DVB–H network.
OUR PRODUCTS, customisable for each network operator, can be grouped into the following families:
• DVB–T, DVB–S, DVB–S2, PDH single and multiple professional receivers
• MPEG2 and MPEG4 decoders• SDI, ASI, etc. change-overs and splitters• Demodulators/adapters (QPSK/ASI, 8PSK/ASI,
ASI/ASI, G703/ASI, IP/ASI, etc.)• 19” rack mounted instruments• Portable field meters and monitoring.
• • • • • • • • • • • • •INGRESS only
•opt. • •An. •An. •An. • • • •An. and Dig.
•TV •TV •TV •TV and SAT •opt. • •TV and SAT •TV and SAT •TV and SAT •TV and SAT
• • • • • • • • • • • • • • • • • • • • • • • • • •opt.
• •emul. •emul. •dem. •dem. •opt.
• • • • • • • • • •EVM • •EVM • • • • • • • • • • • • • • • • • • • •5-930 MHz •5-930 MHz • • • • • • • •
MO
DEL
RADIO
CATV
TV
SAT
47-
870
5 -
870
47-
870
930-
2250
75 Ω
inpu
t imp
ed.
conn
. “F”-
“IEC”
-“BNC
”op
t. ”N
” con
necto
r
MEA
SURE
MEN
TSAU
DIO
- PIC
TURE
SSP
ECIA
L FU
NCT
ION
SM
AIN
SPE
CIFI
CATI
ON
SDE
MO
DULA
TED
M.E
.R.-
B.E.
R.-S
NR-
EVM
NO
ISE
MAR
GIN
QPSK
8PSK
COFDM
QAM
8VSB
SPECTRUMANALYSIS
DIGITAL QUALITY FAIL-MARG-PASS
CONSTELLATION
DIRECT CONDIT.ACCESS
TV SOUNDand RADIO
ANALOG
MPEG4 HD DECODER
MPEG2 DECODER
NETWORK DATA & PROGRAM. NAMESSAT TRANSPOND.
NAVIGATIONAUTOSCAN ofTV PROGRAMS
DRIVER for LNB S.C.R.DRIVER for
DiSEqC MOTORSPOINTING
with 2 LNBs
SAT FINDER
REMOTE POWER SUPPLY VOLTAGES
DiSEqC
BARSCAN and TILT
INGRESSand LEAKAGE
Tuning Systemand NAVIGATION
Level Accuracy (dB)
Dynamic Range dBuV-dBmV-dBm
SW Upgradesvia Internet
SIZE (mm)D-H-L
WEIGHT (Kg)
ABS Shock-ProofHard Case
Battery Duration(hours)
Graphics DisplayTV and SAT
Picture Display
Tota
lPL
ANSPR
OGS
for
PLAN
Tota
l Lo
gger
MEM
ORY
1.1
1.1
1.1
1.1
1.2
2.5
2.5
H.B.2.5
H.B. 5
3h 3h 2.5h
2.5h
2.5h
5h
64x
128
64x
128
64x
128
64x
128
64x
128
64x
128
64x
128
64x
128
4”
color TFT
4.5”
16/9
co
lor TFT
4.5”
16/9
co
lor TFT
5.5”
co
lor TFT
99 99 99 99 99 99 99 99 99
199
199
199
199
199
199
199
199
199
99 99 99 99 99 99 99 99 99
4 with 1 DISPLAY2 with 2 DISPLAY
4 with 1 DISPLAY2 with 2 DISPLAY
4 with 1 DISPLAY2 with 2 DISPLAY
Transp./ Freq./ Prog.in Meas and Spect
Transp./ Freq./ Prog.in Meas and Spect
Chan./ Freq./ Prog.in Meas and Spect
Chan./ Freq./ Prog.in Meas and Spect
Transp./ Ch./ Freq./ Prog.in Meas and Spect
Transp./ Ch./ Freq./ Prog.in Meas and Spect
Transp./ Ch./ Freq./ Prog.in Meas and Spect
Transp./ Ch./ Freq./ Prog.in Meas and Spect
Transp./ Ch./ Freq./ Prog.in Meas and Spect
1.5 Typ. 1.5 Typ. 1.0 Typ. 1.0 Typ. 1.5 Typ. SAT1.0 Typ. TV
1.5 Typ. SAT1.0 Typ. TV
1.5 Typ. SAT1.0 Typ. TV
1.5 Typ. SAT1.0 Typ. TV
1.5 Typ. SAT1.0 Typ. TV
30 - 123 30 - 123 5 - 120 5 - 120 30 - 123 SAT5 - 123 TV
30 - 123 SAT5 - 123 TV
30 - 126 SAT5 - 126 TV
30 - 126 SAT5 - 126 TV
30 - 126 SAT5 - 126 TV
5V - 12V - 18V 5V - 12V - 18V 5V 5V-12V-18V-24V 5V-12V-18V-24V 5V-12V-18V-24V 5V-12V-18V-24V 5V-12V-18V-24V
80x225x195 80x225x165 80x225x195 80x225x195 80x225x195 110x160x280 110x160x280 110x160x280 135x330x380
• • • • • •BAG •BAG •BAG
•USB2 •USB2 •USB2 •USB2 •USB2 •USB2 •USB2 •USB2 •RS 232
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Network Iden.PROGRAMS and PID
Network Iden.PROGRAMS and PID
Network Iden.PROGRAMS and PID
Network Iden.PROGRAMS and PID
Network Iden.PROGRAMS and PID
DM16
4HD D
IGIMA
X
DM16
Q DI
GIM
AX
DM16
C DI
GIM
AX
ST2
SCOU
T
C2 SC
OUT
T2 SC
OUT
S2 8
PSK
SCOU
T
S2 SC
OUT
DM14
C DI
GIM
AX
BAG & LIGHT SHIELD•
TH
E FU
NCTIO
NS,
SPE
CIF
ICAT
ION
S an
d ACCES
SORIE
S M
AY B
E CH
AN
GED
WIT
HO
UT N
OTIC
E
RO.VE.R. Laboratories S.p.A. Via Parini 2, 4 Colombare di Sirmione 25019 (BS) Italy - Tel. +39 030 9198 1Fax +39 030 990 6894 - Skype: monicarover - ginosalocchi - [email protected] - www.roverinstruments.comUN PASSO AVANTI NELLA TELEVISIONE DIGITALE