a1 47518743001 f

8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4

COPYRIGHT @ 2021Ingersoll Rand

ALL RIGHTS RESERVED

CAD GENERATED DRAWING,NO MANUAL REVISIONS ALLOWED

DRAWING CONFORMS TOASME Y14.5M - 1994

DO NOT SCALE DRAWING

PROPRIETARY NOTICE

UNLESS OTHERWISE SPECIFIED PRINTED DOCUMENT IS UNCONTROLLED

UNLESS OTHERWISE SPECIFIED:- REMOVE ALL BURRS AND SHARP CORNERS- WELD SYMBOLS TO BE IN ACCORDANCE WITH ANSI/AWS A2.4

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION, IS THE PROPERTY OF INGERSOLL-RAND CO., AND IS GIVEN TO THE RECEIVER IN CONFIDENCE. THE RECEIVER BY RECEPTION AND RETENTION OF THE DRAWING ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES THAT, EXCEPT AS AUTHORIZED IN WRITING BY INGERSOLL-RAND CO. IT WILL (1) NOT USE THE DRAWING OR ANY COPY THEREOF OR THE CONFIDENTIAL OR TRADE SECRET INFORMATION THEREIN; (2) NOT COPY THE DRAWING; (3) NOT DISCLOSE TO OTHERS EITHER THE DRAWING OR THE CONFIDENTIAL OR TRADE SECRET INFORMATION THEREIN; AND (4) UPON COMPLETION OF THE NEED TO RETAIN THE DRAWING, OR UPON DEMAND, RETURN THE DRAWING, ALL COPIES THEREOF, AND ALL MATERIAL COPIED THEREFROM.

WARNING: THE EXPORT OR REEXPORT OF THIS DRAWING OR A PRODUCT PRODUCED BY THIS DRAWING IS SUBJECT TO U.S. EXPORT ADMINISTRATION REGULATIONS AND OTHER APPLICABLE GOVERNMENT RESTRICTIONS OR REGULATIONS.

THIRD ANGLE PROJECTION

DWG NO.

PART NO.

ESTIMATED WEIGHT(KG UNLESS OTHERWISE SPECIFIED)A1

NAME

SIZE

MODEL SHEET

REVISION

SCALE

R

GENERAL ARRANGEMENTTOLERANCES

ALL DIMENSIONS ARE IN MILLIMETERS

[INCHES (IF SHOWN)]

UNSPECIFIED TOLERANCES:

ANGLES .X

WHOLE :::

13.0[.50] 6.0[.25] 1

Ingersoll-Rand Industrial Technologies

REVISIONSAPP'DDRAWNDATEDESCRIPTIONECNREVZONE

Z.WHITLEY G.SRIKANTH2014MAY05 ORIGINAL RELEASE790486 AZ.WHITLEYN.AMBIKA2014DEC12ADDED SHEET 9, DIM 1807.0 [71.14] WAS 1808.0 [71.18]

DIM 740.5 [29.15] WAS 742.5 [29.23]DIM 1410.0 [55.51] WAS 1412.0 [55.59]DIM 1068.8 [42.08] WAS 1070.8 [42.16]DIM 35.7 [1.40] WAS 19.5 [.77]DIM 266.7 [10.50] WAS 295.0 [11.61]DIM 1185.5 [46.67] WAS 1186.5 [46.71]DIM 266.7 [10.50] WAS 267.0 [10.51]DIM 732.9 [28.85] WAS 736.5 [29.00]DIM 285.8 [11.25] WAS 183.0 [7.20]DIM 1317.1 [51.85] WAS 1348.0 [53.07]DIM 767.8 [30.23] WAS 765.0 [30.12]DIM 438.2 [17.25] WAS 456.0 [17.95]DIM 13.9 [.55] WAS 22.6 [.89]DIM 158.8 [6.25] WAS 145.0 [5.71]DIM 1156.5 [45.53] WAS 1158.5 [45.61]DIM 1536.0 [60.47] WAS 1538.0 [60.55]DIM 740.5 [29.15] WAS 742.5 [29.23]DIM 1806.0 [71.10] WAS 1807.0 [71.14]DIM 1156.5 [45.53] WAS 1158.5 [45.61]DIM 1536.0 [60.47] WAS 1538.0 [60.55]

960610B

3-B8 3-A7 3-B6 3-B6 3-C3 3-C2 3-B1 3-B3 3-A3 4-C7 4-B7 4-B6 4-B6 4-C6 4-C5 4-B3 4-B3 6-B6 6-B6 7-B3 7-B3

Z.WHITLEYN.AMBIKA2015MAY14ADDED SHEET 10, DIM 401.0 [15.79] WAS 403.0[15.87]DIM 289.0 [11.38] WAS 291.0[11.46]DIM 14.0 [.55] WAS 13.9[.55]DIM 158.7 [6.25] WAS 158.8[6.25]DIM 289.0[11.38] WAS 291.0[11.46]

976938C3-C73-B74-D54-D56-B7

Z.WHITLEYA.DHANA2015JUL17DIM 43.0[1.69] WAS 31.5[1.24]DIM 439.1[17.29] WAS 464.0[18.27]DIM 320.7[12.63] WAS 305.0[12.01]DIM 89.1[3.51] WAS 83.1[3.27]DIM 1049.1[41.30] WAS 1020.0[40.16]IN NOTE 5 ADDED RECOMMENDED CLEARANCEFOR VSD PACKAGES.

974303D10-A710-A710-B610-B510-A41-C8

C.TOLERM.PRASHANT2018JAN31REC. TANK 47627570001 WAS 24491557 (< 200 PSI) REC. TANK 22348296 WAS 47529412001 (> 200 PSI)UPDATED DRAWING AS PER NEW RECEIVER TANKS

1285281E

C.TOLERH.RAVIKUMAR2020JAN11NOTE 2 WAS COOLING AIRFLOW : 1950m3/hREARRANGE THE DETAILS OF WEIGHT , AIRFLOW AND CUSTOMER CONNECTION IN TABLE

1418676F1-D81-C81-D6

GENERAL ARRANGEMENT,R4-11KW 120G RECEIVER MOUNTED GENERAL ARRANGEMENT, R4-11KW 120G RECEIVER MOUNTED

SEE NOTE 1 47518743001 47518743001 F0.15 R4 - 11KW 10 OF 1

For Internal Use:Model=47518743001|ASSEM|F.2|suresh y|14-Jan-21 04:58:43 PM|Design<>Drawing=47518743001|DRAW|F.6|Ravikumar Halakeri|15-Jan-21 12:27:59 PM|Design

F.6

DRAWN DATE

G.SRIKANTH 2014MAY05CHECKED DATE

Z.WHITLEY 2014MAY05APPROVED DATE

Z.WHITLEY 2014MAY05DRAWING TYPE

General Arrangement DrawingNOMENCLATURE

CUSTOMER CONNECTIONITEM DESCRIPTION REMARKS

A DISCHARGE AIR 3/4" INCH (FEMALE)B ELECTRICAL INLET BLANK PLATE SUPPLIEDC PACKAGE AIR INLET (COMPRESSOR)D PACKAGE AIR EXHAUST (COMPRESSOR)E PACKAGE AIR INLET (DRYER)F PACKAGE AIR EXHAUST (DRYER)G CONDENSATE DRAIN 10 MM PUSH-IN (FEMALE)

*OPTIONAL CONDENSATE DRAIN ON NO DRYER VERSION: 1/4NPT

WEIGHT (APPROXIMATE)MODEL WEIGHTR4I (120G RECEIVER) 432kgR5.5I (120G RECEIVER) 432kgR5.5N (120G RECEIVER) 437kgR7.5I (120G RECEIVER) 432kgR7.5N (120G RECEIVER) 437kgR11I (120G RECEIVER) 447kgR11N (120G RECEIVER) 457kgR4I (120G TAS) 497kgR5.5I (120G TAS) 497kgR5.5N (120G TAS) 502kgR7.5I (120G TAS) 497kgR7.5N (120G TAS) 502kgR11I (120G TAS) 517kgR11N (120G TAS) 527kg

PACKAGE COOLING AIR FLOW REQUIREMENTS

MODELAIRFLOW

COMPRESSOR DRYER COMBINEDCFM m³/min CFM m³/min CFM m³/min

NON-TAS 1200 34 - - 1200 34TAS 1200 34 541 15.3 1741 49.3

NOTES: 1. 2. 3. PIPE CONDENSATE DRAIN LINES SEPARATELY TO AN OPEN DRAIN DUE TO DIFFERENCES IN DRAIN PRESSURES. READ OPERATIONS MANUAL AND CHECK LOCAL REGULATIONS. 4. LUBRICANT FILL QUANTITY: 5 LITERS. 5. RECOMMENDED CLEARANCE ON THREE SIDES 915MM (36 INCHES), ON SIDE WITH ELECTRICAL BOX OPENING 1067MM (42 INCHES) OR MINIMUM AS REQUIRED BY LATEST NATIONAL ELECTRICAL CODE OR APPLICABLE LOCAL CODES. FOR VSD PACKAGES ONLY: ENSURE THAT A MINIMUM CLEARANCE OF 102 MM (4 INCHES) IS MAINTAINED IN FRONT OF THE PDM FILTER TO ALLOW ADEQUATE SPACE FOR MAINTENANCE. 6. EXTERNAL PIPING SHOULD NOT EXERT ANY UNRESOLVED MOMENTS OR FORCES ON UNIT. USE PIPE OF EQUAL OR GREATER SIZE AT DISCHARGE LOCATION OF UNIT. 7. THERE SHOULD BE NO PLASTIC OR PVC PIPING ATTACHED TO THIS UNIT OR USED FOR ANY LINES DOWNSTREAM. 8. REMOVE THE ISOLATION MOUNT RESTRAINTS BEFORE THE INITIAL START. THE RESTRAINTS CAN BE DISCARDED. 9. FIELD INSTALLED DUCTING TO AND FROM COMPRESSOR CANNOT ADD MORE THAN 6MM (.25 INCH) OF WATER TOTAL AIR RESISTANCE. 10.UNIT HAS AN INTERNAL DISCHARGE CHECK VALVE, EXTERNAL CHECK VALVE NOT REQUIRED. ISOLATION VALVE REQUIRED WITHIN 915 MM (36 INCHES) OF THE COMPRESSOR DISCHARGE. 11.COMPRESSOR SHOULD BE BOLTED TO THE FLOOR WITH FOUR M12 (1/2 INCH) BOLTS USING HOLES SHOWN ON SHEET 3. SEAL RECEIVER TO FLOOR WITH CORK OR RUBBER. 12.DO NOT PIPE INTO A COMMON HEADER WITH A RECIPROCATING COMPRESSOR. UNLESS RECIP COMPRESSOR UTILIZES A DISCHARGE PULSATION DAMPENER. 13. DENOTES CENTER OF GRAVITY. 14.SIZING OF ELECTRICAL COMPONENTS NOT SUPPLIED BY INGERSOLL-RAND IS THE RESPONSIBILITY OF THE CUSTOMER AND SHOULD BE DONE IN ACCORDANCE WITH THE INFORMATION ON THE COMPRESSOR DATA PLATE, NATIONAL AND LOCAL ELECTRIC CODES. 15.A BLANK GLAND PLATE IS PROVIDED FOR ELECTRICAL POWER INLET AS INDICATED. 16.WHEN INSTALLED INDOORS IN A CONFINED SPACE, THE COOLING AIR INLET OR EXHAUST MUST BE DUCTED AWAY FROM UNIT TO PREVENT RECIRCULATION OF HOT EXHAUST AIR. CONNECTION LEGEND - ALL 60 Hz CONNECTIONS ARE NPT (UNLESS SPECIFIED OTHERWISE) - ALL 50 Hz CONNECTIONS ARE BSPT (UNLESS SPECIFIED OTHERWISE)

RELEASED 19/Jan/2021 18:21:52 GMT

8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4

PROPRIETARY NOTICETHIS DRAWING CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION, IS THE PROPERTY OF INGERSOLL-RAND CO., AND IS GIVEN TO THE RECEIVER IN CONFIDENCE. THE RECEIVER BY RECEPTION AND RETENTION OF THE DRAWING ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES THAT, EXCEPT AS AUTHORIZE D IN WRITING BY INGERSOLL-RAND CO. IT WILL (1) NOT USE THE DRAWING OR ANY COPY THEREOF OR THE CONFIDENTIAL OR TRADE SECRET INFORMATION THEREIN; (2) NOT COPY THE DRAWING; (3) NOT DISCLOSE TO OTHERS EITHER THE DRAWING OR THE CONFIDENTIAL OR TRADESECRET INFORMATION THEREIN; AND (4) UPON COMPLETION OF THE NEED TO RETAIN THE DRAWING, OR UPON DEMAND, RETURN THE DRAWING, ALL COPIES THEREOF, AND ALL MATERIAL COPIED THEREFROM.


NAME

A1SCALE SHEET

REVISIONSIZE

NOMENCLATURE

DWG NO.

PART NO.

GENERAL ARRANGEMENT,R4-11KW 120G RECEIVER MOUNTED

GENERAL ARRANGEMENT, R4-11KW 120G RECEIVER MOUNTED

47518743001

47518743001 F0.160 10 OF 2

F.6

FRONT

RIGHT END LEFT END

REAR

GENERAL ARRANGEMENT WITH RECEIVER - DRYER

THESE VIEWS ARE SHOWN FORREFERENCE ONLY


AIR FLOW

AIR FLOW

8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4



NAME

A1SCALE SHEET

REVISIONSIZE

NOMENCLATURE

DWG NO.

PART NO.

R 690.0 [27.17]

1062.90[41.847]

1703.9[67.08]

1850.6[72.86]

337.0[13.27]

1156.6[45.53]

602.4[23.71]

735.3[28.95]

1186.5[46.71]

763.8[30.07]

35.8[1.41]

387.2[15.24]

38.0[1.50]

690.0[27.17]

373.0[14.69]

565.0[22.24]

464.5[18.29]

93.0[3.66]

4.0[.16]

35.1[1.38]

266.7[10.50]

266.7[10.50]

846.6[33.33]

1184.6[46.64]

268.0[10.55]

1525.8[60.07]

296.0[11.65]

28.6[1.12]

385.77[15.188]

720.38[28.362]

528.6[20.81]

264.3[10.41]

62.0[2.44]

401.0[15.79]

1921.8[75.66]

856.3[33.71]

289.0[11.38]

1066.8[42.00]

318.6[12.54]



47518743001

47518743001 F0.13 10 OF 3

F.6

PACKAGE LIFTING POINTS

RIGHT VIEW

F

4X 13.0[.51]

C

LEFT VIEW

D SEE DETAIL A

FRONT VIEW

TOP VIEW


DETAIL ASCALE 0.500


AIR FLOW

AIR FLOW

8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4



NAME

A1SCALE SHEET

REVISIONSIZE

NOMENCLATURE

DWG NO.

PART NO.

488.5[19.23]

1272.3[50.09]

14.5[.57]

158.8[6.25]

285.8[11.25]

438.2[17.25]

881.6[34.71]

1430.8[56.33]

27.6[1.08]

268.0[10.55]

1651.8[65.03]

1376.9[54.21]



47518743001

47518743001 F0.15 10 OF 4

F.6

GENERAL ARRANGEMENTWITH RECEIVER - DRYER

B

A

BACK VIEW

E


8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4



NAME

A1SCALE SHEET

REVISIONSIZE

NOMENCLATURE

DWG NO.

PART NO.



47518743001

47518743001 F0.13 10 OF 5

F.6

PRESSURE RELIEF VALVE

GP DRYER FILTER

HE DRYER FILTER

RECEIVER TANK

HEAT EXCHANGER

COMPRESSOR PRESSURE TRANSDUCER

G

EVAPORATOR

BALL VALVE


DRYER CONTROLLER



AIR FLOW

AIR FLOW

8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4



NAME

A1SCALE SHEET

REVISIONSIZE

NOMENCLATURE

DWG NO.

PART NO.

792.19[31.189]

1022.55[40.258]

960.0[37.80]

1920.8[75.62]

1850.6[72.86]

1703.9[67.08]

690.0[27.17]

725.8[28.58]

728.0[28.66]

401.0[15.79]

289.0[11.38]

856.3[33.71]

62.0[2.44]

382.92[15.076] 528.6

[20.81]

264.3[10.41]

602.4[23.71]

1066.8[42.00]

318.6[12.54]



47518743001

47518743001 F0.13 10 OF 6

F.6

GENERAL ARRANGEMENT WITH RECEIVER - NO DRYER

FRONT VIEW

LEFT VIEW

RIGHT VIEW

PACKAGE LIFTING POINTS

C

4X 13.0[.51]

DTOP VIEW

THIS VIEW IS SHOWN FORREFERENCE ONLY


AIR FLOW

AIR FLOW

8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4



NAME

A1SCALE SHEET

REVISIONSIZE

NOMENCLATURE

DWG NO.

PART NO.

1272.3[50.09]

151.6[5.97]

1651.8[65.03]

268.0[10.55]

27.6[1.08]



47518743001

47518743001 F0.15 10 OF 7

F.6


B

A

BACK VIEW


8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4



NAME

A1SCALE SHEET

REVISIONSIZE

NOMENCLATURE

DWG NO.

PART NO.



47518743001

47518743001 F0.18 10 OF 8

F.6

COOLER COMBINATION (AIR/OIL)

COOLENT FILTER MODULE

SEPARATOR MODULE

AIREND CE55NX

MOTOR

BASE

MINIMUM PRESSURE CHECK VALVE

SIGHT GLASS

COOLANT DRAIN VALVE

RECEIVER

COOLANT FILL PLUG

COMPRESSOR CONTROLLER

EMERGENCY STOP

PDM FILTER


TEMP SENSOR

AIR FILTER ASSEMBLY

PDM FILTER

DRIVE BELT

PACKAGE PRE FILTER

PRESSURE TRANSDUCER



8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4



NAME

A1SCALE SHEET

REVISIONSIZE

NOMENCLATURE

DWG NO.

PART NO.



47518743001

47518743001 F0.20 10 OF 9

F.6

BLOWDOWN ORIFICE

SCAVENGE ORIFICE

CARRIAGE BOLT

JACK BOLT



AIR FLOW

AIR FLOW

8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4



NAME

A1SCALE SHEET

REVISIONSIZE

NOMENCLATURE

DWG NO.

PART NO.

2293.8[90.31]

845.3[33.28]

320.7[12.63]

43.0[1.69]

439.1[17.29]

327.0[12.87]

637.1[25.08]

372.0[14.65]

1049.1[41.30]

568.0[22.36]

91.5[3.60]

58

89.1[3.51]



47518743001

47518743001 F0.10 10 OF 10

F.6

GENERAL ARRANGEMENT WITHOPTIONAL OUTDOOR MODIFICATION(OPTION IS NOT AVAILABLE FOR DRYER OR VSD UNITS)

LEFT END VIEW

RIGHT END VIEW

FRONT VIEW


N7

N7


a1 47518743001 f

Documents