EFB0001 / A2

123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901

3.

The Coffee brewer is equipped with a key set for automatic water filling.You can choose between brewing a full or a half pot of coffee.The key set allows you to adjust water amount in pot and brewingtime

Please read through this manual before you take the machine into operationfor the first time.The manual contents important instructions for a safe and proper usage of the machine.

Always keep this manual within reach for the user!

Generally.

Some tips for best quality.

Do not change the recommended portion of coffee.

Always stir the brewed coffee in pot.

Do not keep coffee warm for more than 30 minutes.

Do not mix freshly brewed coffee with coffee kept warm.

Never fill brewed coffee in the machine.

Instructions

Coffee machine for automatic water filling.In the tank there is a float which activates a microswitch when water is filled.Microswitch activates element unit and brewing starts.During brewing the membran switch is blinking.When the tank is empty the current to the boiler is cut off.The bottom hot plate is always heated when the machine is switched on.The upper hot plate is turned on with a separate switch.The machine is equipped with an overheating protection which is manually restored whenthe current has been cut.

We congratulate to your choice of coffee brewer EFB0001.

123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901

4.

1.1.Locate the machine on a flat level and waterproofsurface.

1. Installation and start.

1.2.Connect to cold water feed with connection tubesupplied.Adapt to a cut-off cock.

1.3. CAUTION!

Connect the plug to a separate wall socket.

240 V, 10 ampere.

123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901

5.

2.2.Place the pot on the hot plate under the filter holder.Turn on control switch 1.

Press the button I/I (Full brew) and the water shallstart pouring

When brewing is ready , empty the pot.

Brewing will take about 6 minutes.

1.4.Turn on control switches placed on the machinesleft and right side. (1 and 2).Ensure that the lamps turn on and that the hotplates get warm.Turn off control switches 1 and 2.

2.1.Do the first brewings with water only .1. Place filter holder without filter and coffee.

1. Installation and start.

2. Rinsing and filling up water system.

Note!Do not make any adjustments of water volume in pot,after the first brewing with water only!

When first brewing, the machine will filling up water system.For this, machine will use approx. 4 dl of water.

6.

3. Brewing of coffee.

3.1.Place a 90mm filter in the filter holder.

123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901

3.2.Add coffee, restaurant / catering grounded coffee).Make sure that the coffee is evenly spread.

3.3.Place the filter holder.

3.4.START BREWING: Turn ON switch 1.Press button I / I (Full brew) to start automaticwater filling.During the brewing the button is blinking.

3.5.When the brew is ready.

Check the volume in the pot.

7.123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901

4.1.If the amount of water is wrong: Adjust with the buttons for automatic water filling.Press the button for I / I (Full) and I /2 (Half) at same time in 5 seconds. The buzzer beeps twice.

See page 8. chapter 4.3. (table)4.2.If you need to adjust the brewtime: Adjust with the buttons for automatic water filling.

I / I button = Increase 5% 1 beep.

0 = Exit and save settings

I / 2 button= Decrease 5% 1 beep.

Press the button for I / I (Full) and 0 at same time in 5 seconds. The buzzer beeps 4 times.

See page 8. chapter 4.4 (table)

NOTE!If you will start a second brewing, keep the first pot at the requiredtemperature by placing on the upper hot plate.Turn on control switch 2.

3. Brewing of coffee

4. Adjusting water amount and brewtime.

I / I button = Increase 5% 1 beep.

0 = Exit and save settings

I / 2 button = Decrease 5% 1 beep.

8.123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901

4. Adjustment of water amount and brewtime.

4.3. Fine tune time for inlet valve:

· Press buttons (Full) and (Half) for 5 seconds. The buzzer beeps twice.· LED pattern and number of beeps when changing indicates actual setting.· Increase valve time with ”Full brew” and decrease with ”Half brew”.

Offset No. of beeps Led pattern Note½ o 1/1

-25% 5 X O O Led lights steady-20% 4 X O O Led flashing-15% 3 X O O Led flashing-10% 2 X O O Led flashing-5% 1 X O O Led flashing0 0 O X O Led lights steady5% 1 O O X Led flashing10% 2 O O X Led flashing15% 3 O O X Led flashing20% 4 O O X Led flashing25% 5 O O X Led lights steady·

Press”O” to exit and save new settings.

SETTINGS

4.4. Fine tune pause time beeper for ”Coffee Ready”

· Press buttons ”Full” and ”O” for 5 seconds.The buzzer beeps four (4) times.· LED pattern and number of beeps when changing indicates actual setting.· Increase pause time with ”Full brew” and decrease with ”Half brew”.

Offset No. of beeps Led pattern Note½ o 1/1

Off 6 X O O Led lights steady-25% 5 X O O Led lights steady-20% 4 X O O Led flashing-15% 3 X O O Led flashing-10% 2 X O O Led flashing-5% 1 X O O Led flashing0 0 O X O Led lights steady5% 1 O O X Led flashing10% 2 O O X Led flashing15% 3 O O X Led flashing20% 4 O O X Led flashing25% 5 O O X Led lights steady·

Press”O” to exit and save new settings.

9.

Each day.

Wash the pot and the filterholder with liquid solu-tion for coffee machines.Clean the spray nozzle and the surroundingarea.Clean the hot plate.

Use a soft rag and liquid solution that doesnot scratch.

Before each brewing.Rinse the decanter.

CAUTION!The machine should not be

Submerged in water orWashed in adishwasher

5. Maintenance

123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901

X

10.123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901

Each week.

Descaling and cleaning.Pour 50 ml descaling / cleaningsolution in a pot and fill it upwith cold water.

Pour the mixture in the machine andproceed with a brewing without a filterpaper or coffee.Rinse by brewing at least 3 times withclean water so that the particles fromdescaling solution disappear.Regular descaling/cleaning will ensureoptimum brewing performance and alonger life of the machine.

Check that the spray nozzle is unblocked.

Dismount and clean if necesserily.

In areas with high level lime problem, adescaling filter should be mounted.

Surface cleaning.Use a soft rag and liquidsolution that doesnot scratch.

5. Maintenance

11.123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901

7. Important

Important.Do not make any alterations to the machine. Such measures may cause personal injury and themachine to fail.The machine should stand on a flat surface so that it will function properly.

The machine should be placed on a water-proof surface so that any leakage is easilynoticeable, make sure there is no bendage on the connection tube when machine is pushedinto its place.The tube connections should be regularly checked. Make sure that no leakage has occurred inconnection with installation.

Do not leave the machine unattended while using. Close water connection when not usingmachine.The machine must be disconnected from electrical supply before any maintenance.

This applies to single-phase current machines. Before any maintenance disconnect the plugfrom the wall socket.Before any maintenance with double-machines: Turn off the headswitch andlock it.

All maintenance and installations must be done of an authorized personel.

12.123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789011234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890112345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901

8. Possible solutions.

Fault Possible Solution(Number in brackets refer to the exploded view)

A. Switch does not light. 1. Check plug connection to wall socket.2. Check fuse in plug.3. Check if hot plate becomes warm, if so

replace switch.

B. Hot plate does not become 1. Check connection to element. warm although switch (5) is lit. 2. If element defective, replace.

C. Brewer omits excess steam. 1. Machine may require descaling.2. Spray nozzel may need unblocking.3. Hose may be bent?4. Inlet to boiler may be blocked. Descale

machine - if boiler still defective - replace.

D. Machine will not brew. 1. Trip-switch has activated - reset with button.For possible fault / solution see C.2. Check microswicth.3. Check float.4. Check connection to boiler.5. Boiler unit may need replacing.

F. The machine does not take in 1. Make sure water-inlet is not closed. water. 2. Make sure the tube is not bent.

3. Check solenoid.4. Check that the lamp on membran switch is blinking.

G. The machines does not stop 1. Dirt in the solenoid. taking in water.

H. The machine is giving wrong 1. Check watertap. amount of water. 2. Bent tube.

3. Dirt in solenoid.4. Membran switch wrongly adjusted.Adjust according toinstallation manual page 8.5. Defect floatregulator in solenoid, change solenoid.

Art. nr. 1704441

FOR SERVICE

Please contact your retail dealer

Automatic Coffee brewer

Your retail dealer

...............................................................................

...............................................................................

...............................................................................

EFB0001