a490/a495 / indien en / a31008-m2200-z701-7-z619 ...krishcorporation.net/admin/uploads/products...¤...

A490/A495 / Indien en / A31008-M2200-Z701-7-Z619 / Overview.fm / 10.02.2012

1

Gigaset A490/A495

± U 11.12. 11:56INT MENU

d

1 Charge status of the batteries2 Answering machine icon (A495 only)3 Display keys4 Message key

Flashes: new messages received5 Use t to activate the menu for setting

the volume6 Handsfree key7 Control key (u)8 Talk key9 Directory key

(press down on the control key)10 End call key and

On/Off key11 Ringer tone on/off

(press and hold in idle status)12 Keypad lock on/off (press and hold)13 Recall key

- Consultation call (flash) - Dialling pause (press and hold)

14 Microphone15 "Microphone off" key

12

2

3

6

8

4

7

10

14

1

The handset at a glance

13

15

9

11

Display key on handset: Pressing a key launches the function that appears above that key in the display.

Display Function when pressedINT Call other registered handsets ¢ page 14.MENU Open main/submenu (see Menu tree ¢ page 22).“ Go back one menu level.U Scroll up/down or adjust volume with u.T Move cursor to left/right with u.˜ Backspace deletes one character at a time.OK Confirm menu function or save entry.

Please noteCharge the handset for 18 hours before first use.

5


2The base station at a glance

A495 only:

1

76

5

3

2

4

1 Registration/paging key: Search for handsets (press briefly, "Paging" ¢ page 13) Register handsets (press and hold ¢ page 13).

2 On/Off key: activate and deactivate answer-ing machine. Lights up: answering machine is activated. Flashes: answering machine is operating.

3 Volume keys: (– = quieter; + = louder) During message playback: adjust the speak-ing volume. While phone is ringing: adjust ringer volume.

4 Play/Stop key: Play back messages from the answering ma-chine, or cancel playback. Flashes: new messages available. Flickering: memory is full.

During message playback: 5 Delete current message. 6 Skip to the start of the current message (press

once) or go to the previous message (press twice).

7 Skip to next message.

ECO WDCTYou are helping to protect the environment with your Gigaset A490/A495.

Reduced energy consumptionYour telephone has an energy-saving adapter plug and uses less energy.


3

Safety precautions

Emergency numbers cannot be dialled if the keypad lock (¢ page 1) is activated! Not all of the functions described in this user guide are available in all countries.

CareWipe the base station, charging cradle and handset with a damp cloth (do not use sol-vent) or an antistatic cloth. Never use a dry cloth. This can cause static.

Contact with liquid

If the handset has come into contact with liquid:1 Switch off the handset and remove the

battery pack immediately.2 Allow the liquid to drain from the hand-

set.3 Pat all parts dry, then place the handset

with the battery compartment open and the keypad facing down in a dry, warm place for at least 72 hours (not in a microwave, oven etc.).

4 Do not switch on the handset again until it is completely dry.

When it has fully dried out, you will nor-mally be able to use it again.

Read this user guide and the safety precautions carefully before use. Explain their contents and the potential hazards associated with using the telephone to your children.

Only use the mains unit supplied.

Fit only the recommended, recharge-able batteries (¢ page 16), i.e. never use a conventional (non-rechargeable) battery or other battery types as this could result in significant health risks and personal injury.The operation of medical appliances may be affected. Be aware of the tech-nical conditions in your particular envi-ronment, e.g. doctor's surgery.Do not hold the rear of the handset to your ear when it is ringing. Otherwise you risk serious and permanent dam-age to your hearing.The handset may cause an unpleasant humming noise in hearing aids.Do not install the phone in a bathroom or shower room. The handset and base station are not splashproof.

Do not use your phone in environ-ments with a potential explosion haz-ard, e.g. paint shops.

If you give your Gigaset to someone else, make sure you also give them the user guide.

Please remove faulty base stations from use or have them repaired by Gigaset service, as they could interfere with other wireless services.

$

ƒ

DisposalBatteries should not be disposed of in general household waste. Observe the local waste disposal regulations, details of which can be obtained from your local authority or the dealer you purchased the product from.All electrical and electronic equipment must be disposed of separately from general household waste using the sites designated by local authorities.The appropriate disposal and separate collection of used equipment serve to prevent potential harm to the environ-ment and to health. They are a precon-dition for the re-use and recycling of used electrical and electronic equip-ment.For further information on disposing of your used equipment, please contact your local authority, your refuse collec-tion service or the dealer you pur-chased the product from.

!

A490/A495 / Indien en / A31008-M2200-Z701-7-Z619 / starting.fm / 10.02.2012

4

First steps

Check the package contents ◆ One Gigaset A490/A495 base station,◆ one power adapter◆ one Gigaset A49H handset,◆ one phone cord,◆ two batteries,◆ one battery cover,◆ one user guide.

If you have purchased a model with multiple handsets, the package should con-tain two batteries, a battery cover and a charging cradle with power adapter for each additional handset.

Setting up the base station and charging cradle (if included)The base station and charging cradle are designed for use in enclosed dry rooms with a temperature range of +5 °C to +45 °C. ¤ Set up the base station at a central location on a flat, non-slip surface in your

house or apartment.

The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of different varnishes and polishes used on today's furnishings, the occurrence of marks on the surfaces cannot be completely ruled out.You can also mount the base station and charging cradle on the wall.

Please note: ◆ Never expose the telephone to the influence of heat sources, direct sunlight or

other electrical devices.◆ Protect your Gigaset from moisture, dust, corrosive liquids and fumes.

Please notePay attention to the range of the base station. This is up to 300 m in unobstructed outdoor areas and up to 50 m inside build-ings.


5

Connecting the base station¤ Connect the plug from the power

supply 1.¤ Plug the power adapter into the plug

socket 2.¤ Then connect the telephone jack 3

and insert the cables into the cable ducts.

Please note: ◆ The power adapter must always be

connected, as the phone will not operate without mains connection.

◆ Only use the power adapter and phone cord supplied. Pin connec-tions on telephone cables can vary.

Setting up the handset for useThe display is protected by a plastic film. Please remove the protective film!

Inserting the batteries and closing the battery cover

13

1

12

WarningUse only rechargeable batteries recommended by Gigaset Communications GmbH (¢ page 16). Never use a conventional (non-rechargeable) battery or other battery types as this could result in significant health risks and personal injury. For example, the batteries could explode. The phone could also mal-function or be damaged as a result of using batteries that are not of the rec-ommended type.


6

Placing the handset in the base/charger¤ Place the handset in the base/charger with its display facing forward.Each handset of your package is registered with the base at the factory. You do not need to register the handset again. If you wish to use your handset with a different base or use further handsets with your base, you have to register the handset man-ually ( ¢ page 13).

To charge the batteries, leave the handset in the base/charger.

Please noteOnly place the handset in the designated base/charger.

¤ Insert the batteries the right way round. The polarity is indicated in/on the battery compartment.

¤ Slide the battery cover from bot-tom up onto the casing until it clicks into place.

¤ If you need to open the bat-tery cover, for instance to replace the batteries, press the ribbing at the top of the battery cover and slide it downward.


7Initial charging and discharging of the batteriesThe correct charge level can only be displayed if the batteries are first fully charged and discharged.

Charge status of the batteriesThe charge status is indicated by the top right display icon. After the initial charg-ing procedure a complete charging to full capacity takes at least 18 hours.◆ U battery full ◆ e steady: mediuim capacity◆ e flashes: batteries almost flat◆ U flashes: charging when the handset is in the charging cradle

Setting the date and timeSet the date and time so that the correct date and time can be assigned to incom-ing calls, and so that the alarm can be used. MENU ¢ Settings ¢ OK ¢ Date/Time ¢ OK ¢ Date: ¢ ~ (enter the day, month and year in 6-digit format) ¢ OK ¢ Time: ¢ ~ (enter hours and minutes in 4-digit format) ¢ OK ¢ a (press to return to idle status)

Please note◆ To get the full talk and standby times, 2 to 3 full charge and discharge

cycles are needed.◆ After the third battery charge and discharge you may replace your handset

in the base station or charging cradle after every call. ◆ Always repeat the charging and discharging procedure if you remove the

batteries from the handset and reinsert them.◆ The batteries may warm up during charging. This is not dangerous.◆ After a while, the charge capacity of the batteries will decrease for techni-

cal reasons.

WarningPlease ensure that the handset is in the charging cradle if you are absent for a long time (e.g. during holidays) or remove the batteries from the handset. Else the batteries could be damaged.

Please noteWhen entering the time and date, you can move the position of an entry to the left or right by pressing the control button up or down.

¤ Place the handset in the base station or charging cradle for 18 hours.

¤ Then remove the handset from the base station or charging cra-dle and do not replace it until the batteries are completely dis-charged.

18 h


8Display in idle statusOnce the phone is registered and the time set, the idle display is shown as in this example. The internal number of the handset is shown in the upper left corner.If the answering machine is activated (A495), the answering machine icon ± will be displayed in the header. Your answering machine is set with a pre-recorded announcement.

Activating/deactivating the handsetPress and hold the a key to activate or deactivate the handset. If you place a deactivated handset in the base station or charging cradle, it will automatically activate.

Your phone is now ready for use.If you have any questions about using your phone, please read the tips on trouble-shooting ("Questions and answers" ¢ page 16) or contact our Customer Care team page 17.

1 ± U 11.12. 11:56INT MENU

A490/A495 / Indien en / A31008-M2200-Z701-7-Z619 / main.fm / 10.02.2012

9

Making callsMaking external calls and ending calls

External calls are calls using the public tele-phone network.~ (Enter the phone number) ¢c. The phone number is dialled. (Or you can first press and hold c to hear the dial tone and then enter the number.) During the call you can adjust the earpiece volume using t and set the volume with u.End the call/cancel dialling: Press the end call key a.

Accepting a call

The handset indicates an incoming call by ringing and by a display on the screen. The base station indicates an incoming call by ringing (A495 only).Press the talk key c to accept the call.When Auto Answer is activated (see Menu tree ¢ page 23), simply remove the hand-set from the base station/charging cradle.In idle status, use t to activate the menu for setting the ringer volume and use u to set the volume.

Calling Line Identification

When you get a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is stored in the directory.Preconditions: 1 You have asked your network provider

for the caller's number (CLIP) to be dis-played on your handset screen.

2 The caller has asked the network provid-er for his number to be identified (CLI).

Muting

You can mute your handset when making external calls. Your caller can no longer hear you.Press the "Microphone off" key m during the call to activate/deactivate the function.

Handsfree (A490/A495)

Activating while dialling: Enter the number ~ and press the hands-free key d. The handfree key is illumi-nated red now.

Switching between earpiece and handsfree mode:During a call and when listening to the answering machine (A495 only), press the handsfree key d to activate or deactivate handsfree talking. During a call, use t to activate the menu for setting the handsfree volume and use u to set the volume.

Using the directory and listsDirectory

To open the directory: press v.You can save up to 80 phone numbers (max. 32 digits) with corresponding names (max. 14 characters). Enter letters/charac-ters ¢ page 15.

Saving the first number in the directoryv ¢ New Entry? ¢ OK ¢ ~ (enter number) ¢ OK ¢ ~ (enter name) ¢ OK

When storing a number you also have to store the corresponding name.

® appears in the display if you have not requested Calling Line Identification, Withheld appears if the caller has withheld CLI, and Unavailable appears if the caller has not requested CLI.


10Storing additional entries in the directoryv ¢ MENU ¢ New Entry ¢ OK ¢ ~ (enter number) ¢ OK ¢ ~ (enter name) ¢ OK

When storing a number you also have to store the corresponding name.

Selecting a directory entryOpen the directory with v. You have the following options:◆ Use u to scroll through the entries until

the required name is selected. ◆ Enter the first character of the name and

scroll to the entry with u, if required.

Dialling with the directoryv ¢ u (select entry) ¢ cUsing other functions v ¢ u (select entry) ¢ MENU

The following functions can be selected with u:

Using shortcut keysYou can assign directory entries to the keys Q and 2 to O:h / v ¢ u (select entry) ¢ MENU ¢ Shortcut ¢ OK ¢ ~ (press the key you want to assign the entry to)

To dial, press and hold the required short-cut key.

Sending the directory to another handsetPreconditions:◆ The sending and receiving handsets

must both be registered to the same base station.

◆ The other handset and the base station can send and receive directory entries.

v ¢ u (select entry) ¢ MENU ¢ Send List ¢ OK ¢ u (select number of the receiving handset) ¢ OK

Last number redial list

This list contains the 10 last dialled num-bers.

Dialling from the last number redial listc (press briefly) ¢ u (select entry) ¢ cManaging entries in the last number redial listc (press briefly) ¢ u (select entry) ¢ MENU

You can select the following settings:

New Entry Save new phone number.

Show Number Display the phone number.

Use Number Edit or add to the number. Then dial or use other functions with MENU.

Edit Entry Edit selected entry.

Delete Entry Delete selected entry.

Delete List Delete all directory entries.

Send List Send the complete list to another handset (¢ page 10).

Shortcut For shortcuts, assign the current entry to a key.

Use Number Edit or add to the number. Then dial or use other functions with MENU.

Copy to Dir. Copy an entry to the direc-tory.

Delete Entry Delete selected entry.

Delete List Delete all entries.


11

Calls list/answering machine (network mailbox) list

The message key flashes as soon as a new entry appears in the calls list/answering machine list. A message appears in the dis-play. When you press the f key, all the lists are displayed. If only one list contains new mes-sages, this will be opened automatically.

Calls list To return calls using the incoming calls list, your phone's area code ("local area code") and/or carrier code must be stored (¢ page 23).Precondition: CLIP (¢ page 9)Depending on the type of list set (¢ page 23), the calls list contains:◆ answered calls◆ missed calls◆ calls recorded by the answering

machine (A495 only)Depending on the type of list set, all num-bers of the last 25 incoming calls are saved or just the missed calls are saved.The calls list is displayed as follows:

Number of new entries + number of old, read entries

Open the calls listf ¢ CallsList 01+02 ¢ OK

The last incoming call is displayed. If necessary, use u to select another entry.

Using other functions u (select entry) ¢ MENU

The following functions can be selected with u:

Returning a call from the calls listf ¢ CallsList 01+02 ¢ OK ¢ u (select entry) ¢ cAnswering machine list (A495 only)You can use the answering machine list to listen to the messages that are on the answering machine. The answering machine list is displayed as follows:

Number of new messages + number of old, played back messages

Opening the answering machine listf ¢ VoiceMail 01+02 ¢ OK

If you have new messages, playback will start with the first new message, otherwise with the first old message. Call date and time (if set) are announced each time before playback. During message playback ◆ use t to activate the menu for setting

the volume and use u to set the vol-ume.

◆ press MENU to select the following func-tions with u:

Please noteIf calls are saved in the network mail-box, you will receive a message if the appropriate settings have been made (depending on your network provider).

CallsList 01+02

Delete Entry Delete current entry.

Copy to Dir. Copy an entry to the direc-tory.

Date/Time Call date and time (if set).

Status New Call: new missed call. Old Call: entry already read.

Delete List Warning! All old and new entries will be deleted.

Repeat Repeat current message.

Next Play next message.

Previous Play previous message.

Delete Delete current message.

VoiceMail 01+02


12

Operating the answering machine (A495)The answering machine can be operated from the handset or by using the key on the base station (¢ page 1). The telephone is supplied with a pre-recorded announcement. You can only record your own announcement messages using the handset. This pre-recorded announcement is used if no personal announcement is available.If the memory is full, the answering machine switches itself off automatically. It activates again automatically when you delete old messages.

Activating/deactivating the answering machineMENU ¢ VoiceMail ¢ OK ¢ Answer Mach. ¢ OK ¢ On/Off ¢ OK

When you switch on the answering machine, the ± icon appears in the dis-play.

Recording your own announcementMENU ¢ VoiceMail ¢ OK ¢ Announcements ¢ OK ¢ Rec announce ¢ OK ¢ Speak after OK ¢ You hear the ready tone (short tone). Now speak your announcement (at least 3 sec.). Press Stop recording to confirm or press a or ” to reject your recording. After recording, the announcement is played back for you to check.

Playing back or deleting announcementsSee Menu tree ¢ page 22.

Playing/deleting messagesOpen the answering machine list to play back messages (¢ page 11).

Deleting all old messagesMENU ¢ VoiceMail ¢ OK ¢ Delete all old ¢ OK (Confirm the secu-rity prompt)

Picking up a call from the answering machineYou can still accept a call while the answer-ing machine is recording the message by pressing c . Recording stops and you can speak to the caller.

Setting up the answering machine

The answering machine has already been preset at the factory. Make individual set-tings using the handset.Details on how to set a delay time, after which the answering machine is to answer a call, as well as details on how to set the recording length and activate call screen-ing during the recording, are available from the Menu tree ¢ page 22.

Using key 1 for fast access to the answering machine (network mailbox)

Simply press and hold key 1 on the hand-set and you will be connected directly to the answering machine (network mailbox).See Menu tree ¢ page 22.

Please noteRecording ends automatically when the max. recording time of 170 seconds is reached or if there is a break in speak-ing of more than 2 seconds.


13

Remote operation when on the move

You can check and activate your answering machine from any other telephone (hotel, pay phone etc.).

Preconditions: ◆ You have set a system PIN other than

0000 ¢ page 23.◆ The phone you are using for remote

operation has touch tone dialling (DTMF), i.e. you hear different tones when you press the keys.

Calling the answering machine and playing back messages~ (Dial your own number) ¢ while listening to your announcement: press the 9 key and enter the system PIN

The following keys are used for operation:

Activating the answering machine~ (Enter your own number and allow the phone to ring until you hear the message: "Please enter PIN") ¢ ~ enter system PIN

Your answering machine is activated. It tells you how much memory time is left. The messages are now played back. The answering machine cannot be deactivated remotely.

Locating a handset ("paging")You can locate your handset using the base station. ◆ Briefly press the registration/paging

key on the base station (¢ page 1).◆ All handsets will ring simultaneously

("paging"), even if the ringer tones are deactivated.

End paging: briefly press the register/pag-ing key on the base station (¢ page 1) or the talk key c on a handset.

Registering handsetsYou can register up to four handsets on your base station (Gigaset A39H/A49H rec-ommended).

Manual registration of handsets to Gigaset A490/A4951. On the base station: press and hold the registration/paging key (¢ page 2) for min. 3 sec. 2. On the handset: within 60 sec. of pressing the registration/paging key MENU ¢ Settings ¢ OK ¢ Handset ¢ OK ¢ Register HS ¢ OK ¢ Enter the system PIN of the base station (default is 0000) ¢ OK. Registering flashes in the display.

Registration takes approx. 1 minute.

A Go to the start of the current mes-sage.Press twice to go back to the previous message.

B Stop playback. Press again to resume.

3 Skip to next message.

0 Delete current message.

Please noteEach additional handset must be regis-tered on the base station in order for it to work properly!

Please noteIf you change the standard PIN 0000 please note that the new PIN must con-sist of 4 digits!


14

De-registering handsetsHandsets can only be de-registered by resetting the base station to its default set-tings with the hardware reset. This will also reset every other setting ¢ page 15.

Using several handsetsMaking internal calls

Internal calls are free calls to other handsets that are registered to the same base station. To make a call to other handsets, press

◆ INT ¢ ~ (1...4, enter internal number of the handset), the handset is called or

◆ INT ¢ star key P, all handsets are called.

When a participant answers you can speak to them. To end the call, press a.

Internal consultation call/connecting a call

You are in conversation with an external participant. Press the INT key and call one or all handsets. ◆ Before the internal participant has

answered, press the end call key a; the call is diverted to the participant who answers the call.

◆ After the internal participant has answered, you can talk to him. Press the end call key a; the call is diverted, or press the “ display key; you are recon-nected to the external participant.

Listening in to an external call

You are conducting an external call. An internal participant can listen in on this call and take part in the conversation (confer-ence). Precondition: The Listening in function must be activated.

Activating/deactivating listening inMENU ¢ Settings ¢ OK ¢ Base ¢ OK ¢ Listening in ¢ OK ¢ On/Off ¢ OK

Internal listening in (conference)To listen in to an existing external call, press and hold the c key. You can listen in to the call. All participants hear a signal tone. To end: press the end call key a. All partic-ipants hear a signal tone.If the first internal participant presses the end call key a, the handset that has "lis-tened in" remains connected to the exter-nal participant.

Setting the alarm clockActivating/deactivating the alarm clockMENU ¢ Alarm Clock ¢ OK ¢ Activa-tion ¢ OK ¢ Off or On ¢ OK

When activated: ¢ Set the wake-up time ¢ OK

When the alarm clock rings, press any key to switch it off for 24 hours. If the alarm clock is set, the wake-up icon l will appear on the screen and the wake-up time will be displayed instead of the date.

Setting the wake-up timeMENU ¢ Alarm Clock ¢ OK ¢ Wake-up time ¢ OK

Enter the wake-up time in hours and min-utes, then press OK.


15

Phone settingsFor details on how to make audio settings, see Menu tree ¢ page 22.For details on how to set the system PIN on the base station, see the Menu tree ¢ page 23.

Changing the display language

MENU ¢ Settings ¢ OK ¢ Handset ¢ OK ¢ Language ¢ OK ¢ select the language ¢ OK

If you accidentally choose a language you do not understand, pressMENU ¢ v ¢ v ¢ v ¢ OK ¢ v ¢ OK ¢ OK

Select another language with u and press OK.

Resetting the handset

You can reset individual settings and changes that you have made. Entries in the directory and the handset's registration to the base station will be retained.MENU ¢ Settings ¢ OK ¢ Handset ¢ OK ¢ Reset Handset ¢ OK ¢ Reset? ¢ OK

Cancel the reset with a.After the reset the calls list is empty!

Restoring the base station to the factory settings

When restoring factory settings: ◆ All handsets are de-registered (with

hardware reset only)◆ Individual settings are reset◆ Voice mail entries are deleted (only

applicable for A495 with software reset)◆ The system PIN is reset to the original

code 0000Only the date and time are set to default.

Software resetMENU ¢ Settings ¢ OK ¢ Base ¢ OK ¢ Base Reset ¢ OK ¢ Reset? ¢ OK

Hardware resetDisconnect the power cord from the base station. Hold down the registration/paging key (¢ page 1) on the base station while reconnecting the power cable to the base station. Release the key after approximately 5 seconds.

Changing the dialling modeYou can set the dialling mode via menu.MENU ¢ Settings ¢ OK ¢ Base ¢ OK ¢ Dialling Mode ¢ OK ¢ select Tone dialling or Pulse ¢OK.

Setting Recall You can set the recall time manually.MENU ¢ Settings ¢ OK ¢ Base ¢ OK ¢ Recall ¢ OK ¢ select Short or Medium or Long ¢OK.

AppendixEntering letters/characters

Press the relevant key the number of times indicated. Briefly press the hash key # to switch from "Abc" to "123" mode, from "123" to "abc"mode and from "abc" to "Abc" mode.

Standard characters

1) Space

1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 13x 14x

1 1 £ $ ¥ ¤2 a b c 2 ä á à â ã çI d e f 3 ë é è ê4 g h i 4 ï í ì î5 j k l 5L m n o 6 ö ñ ó ò ô õM p q r s 7 ßN t u v 8 ü ú ù ûO w x y z 9 ÿ ý æ ø åQ . , ? ! 0 + - : ¿ ¡ " ’ ; _P * / ( ) < = > %

# Abc--> 123

123-->abc # @ \ & §

1)


16

Specifications

Recommended batteriesTechnology: Nickel-metal-hydride (NiMH) Size: AAA (Micro, HR03) Voltage: 1.2 V Capacity: 650 mAhWe recommend the following types of bat-tery:◆ GP 550/700 mAh◆ Yuasa Phone 700/800 mAh◆ Peacebay 550/650 mAh◆ Corun Ni-MH AAAJ650 (650 mAh)◆ Highpower HFR-44AAAJ650 (650 mAh)(Valid at the time of going to press)The handset is supplied with recom-mended batteries.

Base station power consumption

General specifications

Questions and answers

If you have any queries about the use of your telephone, visit our website at www.gigaset.com/service for 24-hour support. The table below con-tains a list of common problems and possi-ble solutions.

In standby mode– Handset in base station – Handset outside base station

approx. 1.3 Wapprox. 0.8 W

During a call approx. 1.0 W

WDCT standard is supportedRange up to 300 m outdoors

up to 50 m indoorsOperation time (WDCT version)– Talk time – Standby time

up to 6 hoursup to 144 hours

Base station power supply

100/240 V~, 50 Hz

Environmental con-ditions in operation

+5 °C to +45 °C, 20% to 75% relative humidity

Problem Cause Solution

Nothing appears in the display.

The hand-set is not switched on.

The batter-ies are flat.

Press the end call key a for approx. 5 seconds or place the handset in the base station.Charge or replace the batteries.

No wireless connection to the base station, Base search flashes in the display.

The hand-set is out-side the range of the base station.

Move the handset closer to the base station.

The base station is not turned on.

Check the mains con-nector on the base sta-tion ¢ page 5.

No wireless connection to the base station, Register HS flashes in the dis-play.

The hand-set is not registered

Register the handset ¢ page 13.

You cannot hear a ringer/dial-ling tone from the fixed line network.

The phone cord sup-plied has not been used or has been replaced by a new cord with the wrong jack con-nections.

Please always use the phone cord supplied or ensure that the pin connections are correct when purchas-ing from a retailer: 3-4 assignment of telephone leads/EURO CTR37.

Error tone sounds after system PIN prompt.

PIN forgot-ten.

The sys-tem PIN you have entered is incorrect.

Reset the system PIN to the default 0000 using the software reset¢ page 15.All settings are reset. All lists are deleted.


17

Customer Service & Assistance

Do you have any questions? As a Gigaset customer, you can find help quickly in this User Manual and in the service section of our Gigaset online portal www.gigaset.com/service.

In our constantly updated online service you can find:

◆ Extensive information about our products

◆ FAQ compilations

◆ Keyword search to help find topics quickly

◆ Compatibility database: Find out which base stations and handsets can be combined.

◆ Product comparison: Compare the features of several products with each other.

◆ Downloads for user manuals and current software updates

◆ E-mail contact form for customer service

Please register your phone online right after purchase.This enables us to provide you with even better service regarding questions or an after sales query/issue/claim. In order to contact our customer service via email, please use the email contact form from our Gigaset online portal after selecting your home country. Our representatives are also available on the telephone hotlines for consultation.

Product warranty

Congratulations

On the purchase of your new Gigaset product, we guarantee that this equipment is a genuie manufacturer’s product and extend the following warranty:

We guarantee this product against manufacturing defects for two full years from the date of purchase, unless specified otherwise.

Adaptors and batteries for cordless phones carry 6 months warranty from the date of pur-chase.

Gigaset Communications authorized Service Centres will replace or repair, if necessary, any defective part/parts free of charge by presenting this certificate of warranty at the Service Centre mentioned overleaf.


18

Warranty This Certificate of warranty does not apply if the telephone has:1. Been misused, mishandled, willfull damaged, neglected, damaged by lightning, im-

properly repaired, tested, altered improperly in any way.2. A defect arising out of any failure to follow instructions either in the manual or product

specification.3. In case repairs are carried out of by unauthorized personnel or unauthorized source

warranty will be void.4. A defect arising from using non-Gigaset approved accessories or ancillary items at-

tached to or in connection with the telephone.5. If this certificate of warranty is not signed and stamped by the authorised distributor.6. Any other claim resulting out of or in connection with the device shall be excluded from

this warranty.

Certificate of warranty

The warranty is not valid if it is not signed and stamped by the authorized distributor.

Please fill in the following details and stamp the card to validate the warranty. All details must be filled in by the dealer and retained by the Customer. The purchase receipt shall be required as evidence for invoking the warranty.

Customer’s Name: ______________________________________________________

Product / Model: _______________________________________________________

Dealer’s Name: _________________________________________________________

Date of Purchase: _______________________________________________________

Invoice / Cash Memo No./Date: ___________________________________________

– Ownership of devices or components replaced by and returned Gigaset communica-tions shall vest in Gigaset communications.

– This warranty shall apply to 2.4Ghz products purchased in India only.

Dealer’s Stamp


19

Service Centres

We offer you support that is fast and tailo-red to your specific needs! Our Online Support on the Internet: www.gigaset.com/service In some countries repair and replace ser-vices are impossible where the products are not sold through our authorised dealers. For the latest Service centers addresses ple-ase visit www.gigaset.com/in.Service Centres

Region North

Delhi - inTarvo Technologies LimitedG4, 5, 6 Chandra Bhawan Nehru Place, New DelhiPin Code: 110 019Centre Incharge: Ms. Suneeta TikooPhone: 011-30962309E-mail: [email protected], Gurgaon- inTarvo Technologies Limited12, 13, 14, First Floor, Ganpati Complex, Old Delhi Road, Opp Hudda Nersury, Near Kata-ria Chowk, Gurgaon, HarayanaPin Code: 122 001Centre Incharge: Mr. Bhasker PatniPhone: 0124-4286829 / -4286826E-mail: [email protected]; [email protected] Pradesh, Noida - inTarvo Technologies LimitedC-32, First Floor, SECTOR-2, Near Hotel Nirula, Noida, Uttar PradeshPin Code: 201 301Centre Incharge: HemantPhone: 0120-4318632E-mail: [email protected]

Punjab, Ludhiana - inTarvo Technologies LimitedB-22,BASEMENT OF SIDHANA ELETROVIS-TION , DASHMESH NAGAR, OPP BANK OF MAHARSHTRA, NR. GILL CHOWNK, LUDHI-ANA, PUNJAB. Pin Code:141003Centre Incharge: Anil KumarPhone: 0161-4641235E-mail: [email protected]

Region South

Karnataka, Bangalore - inTarvo Techno-logies Limited# 6/A, AVS Compound, Ijipura, 80 ft Road, Koramangala, Bangalore, KarnatakaPin Code: 560 034Centre Incharge: HarishPhone: 080-41312700/2705/2710E-mail: [email protected], Chennai - inTarvo Technolo-gies LimitedNo: 112, 1st Floor, Vairam Complex, Thyaga-raya Road, T.Nagar, Chennai, TamilnaduPin Code: 600 017Centre Incharge: Pradeep NairPhone: 044-43412292/43412299/43412266E-mail: [email protected]; [email protected] Pradesh, Hyderabad - inTarvo Technologies LimitedSangeeta Plaza, No 3-9-241, 1st Floor, Near Police Station, West Marredpally, Secun-derabad, Andhra PradeshPin Code: 500 026Centre Incharge: Narendra BabuPhone: 040-40072514/40072513E-mail: [email protected]


20Kerala, Kochi - Bits N Bytes ComputersNo.43/1821 A, Post Office Building, S.R.M Road, Pachalam, Cochin, KeralaPin Code: 682 012Centre Incharge: Shalu Thomas Phone: 9847401718 / 9744705512 / 0484-2401718E-mail: [email protected]; [email protected] Pradesh, Vizag - Planet SolutionsC/o. S.N.K. IT SOLUTIONS PVT.LTD., D.NO: 50-12-7/2, FIRST FLOOR, SATYA RESIDENCY, SEETHAMMAPETA, VISAKHAPATNAMPin Code: 530016Centre Incharge: K. SOMU NAIDUPhone: 97044-80006 / 92466-45999 / 0891-6456269E-mail: [email protected]; [email protected] Pradesh,Vijayawada - Sigma Technologies# 40-5-19/4A Lakshman’s Enclave, Tikkle Road, Vijayawada, Andhra PradeshPin Code: 520 010Centre Incharge: KHALIL SYEDPhone: 9246472168 / 08662472168E-mail: [email protected]

Region West

Maharashtra, MUMBAI - inTarvo Techno-logies LimitedGala No. 4/5, NEW NANDU INDUSTRIAL ESTATE, MAHAKALI CAVES ROAD, ANDHERI (EAST), MUMBAI (Maharashtra) Pin Code: 400093Centre Incharge: Kiran ChaudharyPhone: 8268872271, 08082004837 E-mail: [email protected]; [email protected]

Maharashtra, Pune - inTarvo Technolo-gies LimitedOSWAL COMPLEX ,GROUND FLOOR, 694, TABOOT STREET, M.G. ROAD, PUNE -411001 (LANDMARK : FORMER LANE OF ABN – AMRO BANK CAMP BRANCH, EXISTING LANE OF ROYAL BANK OF SCOTLAND)Pin Code: 411030Centre Incharge: Vijay ChackoPhone: 020-32504045 E-mail: [email protected]; [email protected], [email protected], Ahmedabad - inTarvo Technolo-gies Limited1st Floor, Rituraj Complex, 84/B, Swastik Society,Near Swastik Cross Roads, Navrang-pura Ahmedabad, GujaratPin Code: 380009Centre Incharge: Rashesh RawalPhone: 079-65499327 / 079-65495392E-mail: [email protected]; [email protected], Nashik -Alphabetics Busi-ness Machines Pvt. Ltd13/B Madhuvijay Colony,Vitthal Bunglow, College Road,Nashik - 422002Pin Code: 422002Centre Incharge: Sandeep MalvadePhone: 0253-2341986 / 2342586Email: [email protected], [email protected] Gujrat, Baroda - inTarvo Technologies LimitedShop No.10-11, Ground Floor, Profit Cen-ter,Kalaghoda, Syajigunj, Baroda,GujaratPin Code: 390005Centre Incharge: Rakesh AgrawalPhone: 0265-3911106 / 9824545727Email: [email protected]


21Gujrat, Rajkot - inTarvo Technologies LimitedG.B. Complex, Office No.306, Near Moti Tanki Chowk, Rajkot - 360001Pin Code: 360001Centre Incharge:Phone: 9033745060 / 0281-3057150Email: [email protected]; [email protected], Surat - INTARVO Partner Location (Inditel Services)16 Shivshakti Appartment, Opp Ranujad-ham Society, Bombay Market 2, Punadam Road, Surat. Pin Code: 395006.Centre Incharge: Rahul / MustafaPhone: 9909797347Email: [email protected] East

West Bengal, Kolkata - inTarvo Technolo-gies LimitedAddress: 2 Ripon Street, Near Hira Internati-onal Hotel, Kolkata, West Bengal Pin Code: 700016Centre Incharge: Ms. SusmitaPhone: 033-22277892/899Email: [email protected]; [email protected]


22

Menu treeYour phone has an extensive range of fea-tures. These are offered in the form of menus. To select a function while the phone is in idle status, press MENU (open menu), use

the t and v keys to scroll to the function you require and press OK to confirm.To return to idle status: press the a key.

Alarm Clock

Activation Activating/deactivating the alarm clock

Wake-up time Input format: HHMM

Audio Settings

Handset Volume Earpiece 3 levels available

Speaker 5 levels available

Ringer Volume 5 levels + "Crescendo" available

Ringer Melody External Calls 10 melodies available

Internal Calls 10 melodies available

Alarm Clock 10 melodies available

Advis. Tones Switch advisory tones (e.g. positive or negative confirma-tion, key tones) on or off.

VoiceMail

Set Key 1 (all devices)

Netw. Mailbx Assign key 1 with network mailbox and enter the network mailbox number (in idle status, press and hold key 1 to dial). Netw. Mailbx: your network provider's answering machine; must be requested separately. The net-work mailbox list can be displayed if your network provider supports this function and if key 1 has been assigned with the network mailbox.

(Devices with answering machine only)

Answer Mach. Assign key 1 with answering machine (in idle status, press and hold to dial).

Answer Mach. Activating/deactivating the answering machine

Call Screening Handset You can use the loudspeaker on the handset to screen a message that is being recorded.

Base You can use the loudspeaker on the base station to screen a message that is being recorded.

Announcements Rec announce ¢ page 12

Play announce Play your announcement

Del announce Delete your announcement


23

Message Length Maximum No limit per call (overall recording time up to 12 minutes ).

1 Minute Limit the recording time to 1 minute per call.

2 Minutes Limit the recording time to 2 minutes per call.

3 Minutes Limit the recording time to 3 minutes per call.

Ring Delay Immediately Call is answered immediately.

10 sec Call is answered after 10 seconds.



Auto If there are no new messages, the answering machine answers a call after 18 seconds. If new messages are present, the answering machine answers a call after just 10 seconds.

Language Set the language for answering machine messages.

Delete all old ¢ page 12

Settings

Date/Time Enter date (DDMMYY format), then time (HHMM format) ¢ page 7

Handset Language Set the display language ¢ page 15

Auto Answer Automatically activate/deactivate auto answer ¢ page 9

Register HS Manually register the handset ¢ page 13

Call list type Missed Calls ¢ page 11

All Calls ¢ page 11

Reset Handset Reset the handset ¢ page 15

Base Audio Settings (A495 only)

Ringer Volume 5 levels + "Crescendo" available

Ringer Melody 10 melodies avail-able

System PIN Change system PIN (default is 0000)

Base Reset Restore factory settings ¢ page 15

Listening in Activate/deactivate the function ¢ page 14

Area Code Enter Area Code (max. 4 digits)

Carrier Code Enter Carrier Code (max. 3 digits)

Dialling Mode Tone dialling ¢ page 15

Pulse ¢ page 15

Recall Set the number for the current recall flashes ¢ page 15


24

Issued by Gigaset Communications GmbH Frankenstr. 2a D-46395 Bocholt

© Gigaset Communications GmbH 2012 All rights reserved. Subject to availability. Rights of modification reserved. www.gigaset.com

A31008-M2200-Z701-7-Z619

a490/a495 / indien en / a31008-m2200-z701-7-z619 ...krishcorporation.net/admin/uploads/products...¤...

Documents