westell .com

General DescriptionWestell’s AISG Controller Kit is a convenient tool for on-site

maintenance and service of AISG devices such as Westell’s line

of variable gain Tower Mounted Amplifiers (TMAs) or other

manufacturers’ Remote Electronic Tilt (RET) antennas. Included in

Westell’s AISG controller kit is an AISG controller (with an AC power

adapter and cord), a Current Injector Model (CIM), a USB-to-USB cable

to interface the controller with an AISG device, and an RF adapter for

the CIM (7/16 DIN female to female). All kit parts come shipped inside

a durable, rigid-plastic carrying case with foam insert, for protection,

shock-absorption, and convenience.

A99-AISG-CNTRL-A AISG Controller Kit

Portable AISG 2.0/1.1 Controller

Page 1 of 2

Application Diagram

Model Number

• A99-AISG-CNTRL-A

Features & Benefits

• Controls gain settings for the Westell series of variable gain

TMAs

• Controls tilt settings of RETs

• Compliant with Antenna Interface Standards Group

(AISG 1.1 & v2.0) standard

• Compact size

• Simple operation

• Kit includes AISG controller, cables, AWS-CIM-R+, 7/16 DIN

adapter and hard plastic carrying case

AISG Control Cables

Copyright © 2015 by Westell, Inc. All Rights Reserved. Westell, ClearLink, Kentrox, and Optima

Management System are registered trademarks of Westell, Inc. All other names are trademarks of their

respective owners. Information is correct at time of printing and is subject to change without notice.

Westell, Inc. is an Equal Opportunity/Affirmative Action employer.

westell .com

030-200278 rA 12/09/15

Page 2 of 2

A99-AISG-CNTRL-A

AISG Adapter/Controller Specifications AISG Connectors 1 female connector

Max. output to AISG devices 17W

Protocol to TMA (or RET) AISG 1.1 & v2.0

Communication ports USB 1.1/2.0

Max. number of devices* Up to 24 devices

LED indicators PWR, 12V, TX Data, RX Data

Dimensions 1.83” x 1.36” x 4.88” (47 mm x 35 mm x 125 mm)

USB cable USB 2.0 revision cable, 6 feet (1.83 meters)

Operating temperature 0 C to + 55C

CIM Specifications Frequency range 700-2800 MHz

DC input (nominal) 12V @ 3A max.

DC In to ANT resistance 1Ohm

Bias port return loss > 6 dB (AISG 2.176 MHz)

DC input connector AISG 8-pin male

RF connector to TMA/ANT 716 DIN male

Additonal Specifications Carrying case 12.5” x 8.75” x 5”, black, high

density polyethylene double walls, two latches, folding handle, rounded corners

AISG cable 8-pin mael to 8-pin female3 meters (9.84 feet)

RF adapter 716 DIN female to 7/16 DIN female jack in series

Kit Weight w/o case 1.5 Kg (3.3 lbs, with accessories)