aama 507-12 thermal performance report … · aama 507-12 thermal performance report rendered to:...
TRANSCRIPT
AAMA 507-12 THERMAL PERFORMANCE REPORT
Rendered to:
TORO ALUMINUM
SERIES/MODEL: Series 8200 Curtain WallTYPE: Glazed Wall System
Report No:Report Date:
E7666.01-116-4505/15/15
130 Derry CourtYork, PA 17406
p. 717.764.7700f. 717.764.4129
www.archtest.com www.intertek.com/building
Simulation Date:
Simulation Specimen Description:
Material Finish: Painted Aluminum
AAMA 507-12 THERMAL PERFORMANCE REPORT
Project Summary:
Reference Documents:
Rendered to:
TORO ALUMINUM330 Applewood Crescent
Architectural Testing, Inc., a subsidiary of Intertek (Intertek-ATI), was contracted by ToroAluminum to provide U-Factor and Solar Heat Gain Coefficient thermal performance ratingson the Series 8200 Curtain Wall Glazed Wall System. The thermal performance ratings weredetermined in accordance with AAMA 507-12, Standard Practice for Determining the ThermalPerformance Characteristics of Fenestration Systems Installed in Commercial Building.
05/15/15
Concord, ON L4K 4V2 Canada
Series/Model: Series 8200 Curtain WallType: Glazed Wall System
AAMA 507-12, Standard Practice for Determining the Thermal Performance Characteristics of Fenestration Systems Installed in Commercial Buildings
ANSI/NFRC 100-2014, Procedure for Determining Fenestration Product U-Factors
ANSI/NFRC 200-2014, Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Transmittance at Normal Incidence
Configuration: Two vision lites separated by one intermediate verticalDrawing Reference:
Frame Material: Aluminum Thermally Broken Framing System
Specimen Size: 2000mm wide by 2000mm high (78-3/4" by 78-3/4")
Toror Aluminum Drawing Series 8200 Hor./Vert. Details, dated 03/26/15
Report No: E7666.01-116-45Report Date: 05/15/15
130 Derry CourtYork, PA 17406
p. 717.764.7700f. 717.764.4129
www.archtest.com www.intertek.com/building
E7666.01-116-45Page 2 of 10
Toro AluminumSeries 8200 Curtain Wall - Glazed Wall System
System U-Factor vs. Percentage of Vision Area
Vision Area / Total Area (%)
Note: 1 inch Overall - Dual Glazed Glass (0.48-0.20 COG) with Aluminum Spacer, Dual Glazed Glass with Heat Mirror (0.18-0.10 COG) with Aluminum Spacer
Syst
em U
-Fac
tor (
Btu
/h∙ft
2 ∙ºF)
0.48
0.46
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
0.18
0.16
0.14
0.12
0.10
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.65
0.70
707580859095
COG U-Factor
E7666.01-116-45Page 3 of 10
Toro AluminumSeries 8200 Curtain Wall - Glazed Wall System
System SHGC vs. Percentage of Vision Area
Vision Area / Total Area (%)
System VT vs. Percentage of Vision Area
Vision Area / Total Area (%)
Syst
em S
HG
CSy
stem
VT
0.75
0.70
0.65
0.60
0.55
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.65
0.70
0.75
707580859095
COG SHGC
0.75
0.70
0.65
0.60
0.55
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.65
0.70
0.75
707580859095
COG VT
E7666.01-116-45Page 4 of 10
Toro AluminumSeries 8200 Curtain Wall - Glazed Wall System
11 0.28 0.38
9 0.32 0.4110 0.30 0.39
7 0.36 0.448 0.34 0.43
5 0.40 0.486 0.38 0.46
3 0.44 0.514 0.42 0.49
1 0.48 0.542 0.46 0.52
0.220.200.18
Size Specific U-Factor Matrix*Glazing Option Center of Glass U-Factor Overall U-Factor
20 0.10 0.22
12 0.26 0.36
18 0.14 0.25
0.241314151617 0.16
Note: 1 inch Overall - Dual Glazed Glass (0.48-0.20 COG) with Aluminum Spacer, Dual Glazed Glass with Heat Mirror (0.18-0.10 COG) with Aluminum Spacer
0.340.330.310.280.27
19 0.12 0.23
E7666.01-116-45Page 5 of 10
Toro AluminumSeries 8200 Curtain Wall - Glazed Wall System
Size Specific SHGC Matrix* Size Specific VT Matrix*Center of Glass SHGC Overall SHGC Center of Glass VT Overall VT
0.75 0.68 0.75 0.680.70 0.64 0.70 0.630.65 0.59 0.65 0.590.60 0.55 0.60 0.540.55 0.50 0.55 0.500.50 0.46 0.50 0.450.45 0.41 0.45 0.410.40 0.37 0.40 0.360.35 0.32 0.35 0.320.30 0.28 0.30 0.270.25 0.23 0.25 0.230.20 0.19 0.20 0.180.15 0.14 0.15 0.140.10 0.10 0.10 0.090.05 0.05 0.05 0.05
*Size Specific U-Factor, SHGC, and VT Matrices are based on the standard GlazedWall System specimen size of 2000mm wide by 2000mm high (78-3/4" by 78-3/4").This represents 90.7% Vision Area / Total Area.
E7666.01-116-45Page 6 of 10
0.37140.3500
0.3787
0.4133
0.3613
0.3959
0.4817
0.4476
0.4646
0.4255
0.4420
0.4089
0.5414
0.5248
0.6149
0.6264
0.5082
0.3818
0.6495
0.6377
0.41230.3907
0.6963
0.6845
0.4089
0.37170.3711
0.3951
0.3984
0.4121
0.3683
0.38500.3635
0.3769
0.4497
0.4536
0.43990.41810.4223
0.4259
1.08431.43021.40691.08011.0848
0.48170.45960.4636
0.46760.4456
1.4123
1.09001.4339
1.4188
1.09891.44001.4170
1.4354
1.4154
1.1012
0.3987
1.4108
1.0881
0.38470.3852
1.29311.3021
2.59521.29311.3021
1.2931
1.30211.2931 0.4125
0.3982
1.43271.4092
1.08571.0904
0.4042
2.59521.29311.3021
2.59521.2931
1.3021
1.2931
1.30211.3021
1.4291
0.4818
0.46750.4677
0.45340.4537
0.43970.4401
0.42570.4260
52.0
1.0825
1.29311.3021
2.59521.29311.30211.30211.2931
1.4311
45.8
46.8
47.9
48.9
50.0
1.3021
2.59521.2931
2.5952
Sill
78.74"
95%Vision Area
148.43"by
1.09431.43681.4138
NFRC
Edge
U-F
acto
r
Vision Area Data
43.7
100-201078.74"
by
0.47761.3021 0.7082 0.4988
Opt
ion
No.
R. Jamb
Sill
0.4816
0.43170.4362
1.09651.4384
1.0966
1.29311.0922
CO
G T
empe
ratu
re
Head
70%Vision Area
23.20"by
23.20"
Total Product U-Factor
Fram
e U
-Fac
tor
148.43"CO
G U
-Fac
tor
0.481
0.32
2
3
4
9
71.08351.0882
1.08191.0867
51.0
1.0858
1.4082
0.42
0.40
0.348
0.38
5
0.36
6
MullionSillHead
MullionSillHead
L. JambR. Jamb
Cro
ss S
ectio
nHead
MullionSill
Mullion
Sill
Head
Mullion
2.59521.2931
1.09421.0988
1.09201.0966
1.08981.0945
1.08771.0924
L. Jamb
1.30211.2931
2.5952
L. JambR. Jamb
1.29311.3021
2.5952
1.3021
MullionSill
R. JambMullionSillHead
1.2931
Sill
Fram
e H
eigh
t
HeadL. JambR. JambMullion
0.6728
0.6610 0.4304
0.4918
0.4752
L. Jamb0.4586
Head
Mullion
0.46
0.44
44.8
Head
L. JambR. Jamb
L. JambR. Jamb
L. JambR. Jamb
L. Jamb
R. Jamb
1.30211.2931
1.30211.2931
1.3021
E7666.01-116-45Page 7 of 10
Vision Area Data
Sill 1.2931 1.3764 0.2323
Opt
ion
No.
CO
G U
-Fac
tor
CO
G T
empe
ratu
re
Cro
ss S
ectio
n
Fram
e H
eigh
t
Fram
e U
-Fac
tor
Edge
U-F
acto
r
Total Product U-Factor70% NFRC 95%
Vision Area 100-2010 Vision Area
0.2640
23.20" 78.74" 148.43"by by by
23.20" 78.74" 148.43"
16 0.18 59.5 Head 1.3020 1.3540 0.5126 0.2849 0.2347
L. Jamb 1.3021 1.0784 0.3578R. Jamb 1.2931 1.0831 0.3583
L. Jamb 1.3021 1.0767 0.3443
0.3367
0.3449R. Jamb 1.2931 1.0815
L. Jamb 1.3021 1.0751 0.33090.3316R. Jamb 1.2931 1.0799
R. Jamb 1.2931 1.0784L. Jamb 1.3021 1.0736 0.3176
L. Jamb 1.3021 1.0723 0.30430.3050R. Jamb 1.2931 1.0771
Mullion
R. Jamb 1.2931 1.0758L. Jamb 1.3021 1.0709 0.2910
1.3021 1.4058 0.3550 0.603610 0.30 53.1 Head 0.3923 0.3439
Mullion 2.5952 1.0807 0.3580Sill 1.2931 1.4281
1.3021 1.4048 0.3417 0.592311 0.28 54.2 Head 0.3757 0.3264
Mullion 2.5952 1.0791 0.3446Sill 1.2931 1.4272
12 0.26 55.2 Head0.3234
1.3021 1.4037 0.3285 0.5810
Sill 1.2931 1.4262 0.3101
0.3590 0.3089
Mullion 2.5952 1.0775 0.3313
13 0.24 56.3 Head 1.3021 1.4028 0.3153 0.2915
Mullion 2.5952 1.0760 0.31800.3183
0.5698 0.3424
0.3021 0.2740Sill 1.2931 1.4254 0.2969
0.5586 0.325814 0.22 57.3 Head 1.3021 1.4021
Sill 1.2931 1.4248 0.28372.5952 1.0747 0.3046
15 0.20 58.4 Head 1.3021 1.4012 0.2890 0.2563
Mullion 2.5952 1.0733 0.29140.2918
Sill 1.2931 1.4242 0.2706
0.5475 0.3092
Mullion 2.5952 1.0061 0.2521R. Jamb 1.2931 1.0085 0.2524
0.5014 0.2680 0.2167L. Jamb 1.3020 1.0038 0.2517
Mullion 2.5952
17 0.16 60.6 Head 1.3020 1.3528 0.2508Sill 1.2931 1.3774 0.2455
1.0079 0.2653R. Jamb 1.2931 1.0103 0.2657L. Jamb 1.3020 1.0056 0.2650
18 0.14 61.7 Head 1.3020 1.3533 0.2366 0.4901 0.2512 0.1989L. Jamb 1.3020 1.0032 0.2373R. Jamb 1.2931 1.0079 0.2381
1.0055 0.2377Mullion 2.5952Sill 1.2931 1.3770 0.2183
E7666.01-116-45Page 8 of 10
Mullion 2.5952 1.0039 0.2243R. Jamb 1.2931 1.0063 0.2247
0.2233 0.4788 0.2343 0.1808L. Jamb 1.3020 1.0015 0.2239
19 0.12 62.8 Head 1.3020 1.3523
by by by23.20" 78.74" 148.43"
NFRC 95%Vision Area 100-2010 Vision Area
23.20" 78.74" 148.43"
Vision Area DataO
ptio
n N
o.
CO
G U
-Fac
tor
CO
G T
empe
ratu
re
Cro
ss S
ectio
n
Fram
e H
eigh
t
Fram
e U
-Fac
tor
Edge
U-F
acto
r
Total Product U-Factor70%
Sill 1.2931 1.3762 0.205020 0.10 63.9 Head 1.3020 1.3515 0.2100 0.4676 0.2174 0.1627
L. Jamb 1.3020 1.0000 0.2104R. Jamb 1.2931 1.0049 0.2112Mullion 2.5952 1.0024 0.2108Sill 1.2931 1.3756 0.1917
E7666.01-116-45Page 9 of 10
SIMULATED BY: REVIEWED BY:
KLL:KLLE7666.01-116-45
Attachments (pages): This report is complete only when all attachments listed are included.Appendix A: Drawings and Bills of Material (9)
Intertek-ATI will service this report for the entire test record retention period. Test records thatare retained such as detailed drawings, datasheets, representative samples of test specimens, orother pertinent project documentation will be retained by Intertek-ATI for the entire test recordretention period. The test record retention end date for this report is May 15, 2019.
Results obtained are simulated values and were secured by using the designated test methods.This report does not constitute certification of this product nor an opinion or endorsement bythis laboratory. It is the exclusive property of the client so named herein and relates only to theproduct simulated. This report may not be reproduced, except in full, without the writtenapproval of Intertek-ATI.
Kristen L. Louder Kevin S. LouderSenior Simulation Technician Project Engineer
For INTERTEK-ATI:
E7666.01-116-45Page 10 of 10
Original Report Issued to Toro Aluminum
Rev. #
All.01R0 05/15/15
Date Page(s) Revision(s)
Revision Log
All drawings and Bills of Material used in simulating this product are enclosed in this Appendix.
Appendix AE7666.01-116-45