aarea rea llii - villa lighting · a round pole plate adaptor (rpp) is required for mounting to...
TRANSCRIPT
Pages 2-3 Pages 6-7
Pages 8-9
Pages 10-11 Pages 12-13
Pages 14-15
Pages 16-17
Pages 18-19
Pages 20-21
Pages 26-27
1
ParkingStar
LumenStar
Hillsboro
AutoLux
Toronto
SmartFloods
American
American RoundPages 22-23
Concourse
Caribbean
OrbiStar
Pages 4-5Polera
Page 24-25Center Court Standard
AREA LIGHTINGAREA LIGHTINGA
REA
Model No. Optics Wattage Source Voltage Mounting Finish / Stripe Options
Model Optics Wattage Source Voltage Mounting Options
AME-1
AME-2
AME-3
AME-4
Type II(T2)
Type III(T3)
Type IV(T4)
Type IV-AAutomotive
(T4A)
Type V(T5)
100 (100)150 (150)175 (175)
250 (250)320 (320)400 (400)
400 (400)750 (750)
1000 (1000)*Reduced Envelope
Lamp on 1000w
750 (750)1000 (1000)
*Reduced EnvelopeLamp on 1000w
PS, HPS PS, HPS
MH, PS (M), (P), (S)
MH, PS, HPS PS MH, PS, HPS (M), (P), (S)
MH, PS, HPS PS
(M), (P), (S)
PS MH, PS, HPS
Bolt-On Arm 6”(BOA6)
Bronze (BZ)Black (BK)White (WH)Green (GN)Grey (GY)Silver Metallic(SL)Custom (CC)Color Stripe
Blue Metallic (94)
Red Opaque (188)
Silver Metallic (58)
Gold Metallic (41)
White Opaque (50)
Black Metallic (60)
Charcoal Metallic (20)
Photocell & Receptacle
(PC120) (PC208)(PC240) (PC277)
Photo Receptacle*With Shorting Cap
(PER)
Fusing*Single In-Line Fuse
(SF120) (SF277)*Double In-Line Fuse
(DF208) (DF240)(DF480)
Light Shield(LS)
Convex Glass Lens*Option Available on AME-2 Only
(VLCG)RPP-1
Spider Mount(SM)
AME
*Round Pole PlateAdaptors (RPP) are to be ordered separately.
*See Mounting Section forWallmount options
MH, PS, HPS
*Specify voltage
*Specify voltage
*Specify voltage
Round Pole Plate Adaptor(RPP)
Quartz Restrike (QR)
Multi-Tap ballast factory wired at 277v unlessotherwise specified.
(Not AvailableAME-1 & 2)
(M), (P), (S)
Bolt-On Arm 10”(BOA10)
Finish/ Stripe
(PCR480)
120(1)
208(2)
240(3)
277(4)
480(5)
M.Tap(6)
5- Tap(7)
Standard for 400 & 1000w MH only, factory wired at 480vunless otherwisespecified.
Supplied as standardfor AME-1 & 2, unlessspecified otherwise.
Supplied as standardfor AME-3 & 4, unlessspecified otherwise. Supplied for all AMEsizes with D90, T90& Quad mounting.
Fixture A B C
"41 "41 "01 " w571ylnOssalGtalF
"91 "91 "21 " w004
"32 "32 "31 " w0001ylnOssalGxevnoC
"32 "32 "51 " w0001ylnOssalGtalF
Flat Glass (Convex Optional)
AME-1
AME-2
AME-3
AME-4
sttaW.xaMepirtS
2„
2
2
2
Dimensional DrawingsA
B C
2
Listed for wet locations
The American Series blends contemporary architectural styling with ad-vanced optics for superior performance in area and site lighting applica-tions. The fl at lens, vertical lamp, IES full cut-off luminaire is Dark Sky certifi ed to restrict light trespass, glare and light pollution for neighborhood-friendly outdoor lighting.
The clean, compact housing style features a decorative reveal available in complementary or contrasting colors. Computerized precision machinery and quality materials insure manufacturing to the highest industry stan-dards.
American is offered in four enclosure sizes and fi ve distribution patterns, including a special forward throw Type IV-A refl ector for auto dealership front line lighting. High effi ciency photometric performance allows the use of few-er fi xtures and poles with wider spacings, providing substantial equipment, installation and energy cost savings.
American is a proven performer for auto dealerships, shopping centers, parking lots and general area lighting. A wide selection of light sources from 100 through 1000 watts are offered, including Pulse Start lamps for excellent effi ciency, lumen maintenance and color. Convex lens is avail-able where light trespass restrictions do not apply.
AREA LIGHTINGAREA LIGHTINGAmerican
19645 Rancho Way • Rancho Dominguez, CA • 90220Tel: (310) 512-6480 • Fax: (310) 512-6486
www.visionairelighting.comVISIONAIRE LIGHTINGVISIONAIRE LIGHTING
For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice.
AR
EA
EPA Data
Fixture with Bracket
AME-1AME-2AME-3AME-4
1.4 2.6 2.8 3.8 3.3 4.5 1.72.2 4.0 4.4 6.0 5.1 7.1 2.63.2 5.8 6.4 8.7 7.4 10.2 3.73.4 6.2 6.8 9.2 7.8 10.9 3.9
Cast Wall PlateBolt-On-Arm Detail Spider Arm Detail
Spider Mount
American SpecificationsMounting• An extruded aluminum, bolt-on-arm (BOA), with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. A Round Pole Plate Adaptor (RPP) is required for mounting to 3” -5” Round Poles.
Electrical Assembly• All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit.• Quick disconnect wiring is standard.• Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K (5K for 1000 watt) and 600V.
Options• Fixtures available with a variety of options, including photo cell, photo receptacle, convex glass lens, light shield, fusing, and quartz restrike. Please consult factory for custom options.
Listings• American is UL listed, suitable for damp and wet locations. • Dark Sky Friendly® certifi ed by the International Dark Sky Association. (Flat Lens models with Type III or Type V Refl ectors)
3
Housing• All housings are manufactured using technologically advanced computer numerical control (CNC) machinery. Precision sheared and formed from one piece, .080 gauge, corrosion resistant alu-minum, with tooled external reveal.• The computerized CNC machinery enables all American housings to be constructed quickly, efficiently, and adhe-ing to exacting ISO 9002 standards. All external hardware is stainless steel.
Lens and Door Assembly• Hinged door assembly is CNC precision, sheared and formed from one piece, .080 gauge, corrosion resistant aluminum with captive stainless steel fasteners. • The standard lens is a clear tempered fl at glass, secured by gal-vanized lens retainers and sealed with one piece extruded silicone gasketing to provide complete weather and insect protection.
Optical System• Refl ector is precision CNC cut and bent, multi-faceted, seg-mented, highly effi cient, 95% refl ective aluminum. Available in fi ve distribution patterns.• Tool-less refl ector entry.• Field rotatable refl ector (except Type V).
Quali-Guard® Finish• The fi nish is a Quali-Guard® textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat fi nish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors.
AR
EA
Polera
A
C
B
A B C ttaW.xaM
"62 "71 "01 w00
"03 "�02 "�31 w000
4
1
erutxiF
POL-1
POL-2
Dimensional Drawings
The Polera luminaire features a unique contemporary design inspired by the sleek styling of a European sports car. High performance optics produce superior illumination with excellent uniformity in area and site lighting applications. The fl at lens, vertical lamp, IES full cut-off luminaire is Dark Sky certifi ed to restrict light trespass, glare and light pollution for neighborhood friendly outdoor lighting.
The low profi le, aerodynamic-shaped housing is complimented with a uniquely styled mounting arm. A durable polyester powder coat fi nish in a selection of architectural colors enhance any application. Computerized precision machinery and quality materials insure manufacturing to the
highest industry standards. Polera is available in two sizes and fi ve distribu-tion patterns, including a special forward throw Type IV-A refl ector for auto dealership front line lighting. High effi ciency photometric performance permits the use of fewer fi xtures and poles with wider spacings, providing substantial equipment, installation and energy cost savings.
Polera is an exceptional choice for auto dealerships, shopping centers, parking lots, streetlighting and general area lighting. A wide selection of light sources from 100 through 1000 watts are offered, including Pulse Start lamps for excellent effi ciency, lumen maintenance and color. Convex lens is available where light trespass restrictions do not apply.
4
11”
Model No. Optics Wattage Source Voltage Mounting Finish Options
Model Optics Wattage Source Voltage Mounting Finish Options
POL-1
POL-2
POL
PS, HPS
MH,PS, HPS PS
PS, HPS MH,PS
MH,PS, HPS (M), (P), (S)
PS MH, PS, HPS (M), (P), (S)
Bronze (BZ)Black (BK)White (WH)Green (GN)Grey (GY)Silver Metallic(SL)Custom (CC)
Photo Receptacle*With Shorting Cap
(PER)
Fusing*Single In-Line Fuse
(SF120) (SF277)*Double In-Line Fuse
(DF208) (DF240)(DF480)
Light Shield(LS)
RPP-1
*See Mounting Section forWallmount options
*Specify voltage
*Specify voltage
(RPP)Round Pole Plate Adaptor
Quartz Restrike (QR)
Convex Glass Lens(VLCG)
Photocell & Receptacle
(PC120) (PC208)(PC240) (PC277)
*Specify voltage
(PCR480)
120(1)
208(2)
240(3)
277(4)
480(5)
Multi-Tap ballast factory wired at 277v unless otherwise specified.
M.Tap(6)
5- Tap(7)
Standard for 400 & 1000w MH only, factory wired at 480vunless otherwisespecified.
Type II(T2)
Type III(T3)
Type IV(T4)
Type IV-A Automotive
(T4A)
Type V(T5)
(Not AvailablePOL-1)
Bolt-On Arm 6”(BOA6)
*Round Pole PlateAdaptors (RPP) are to be ordered separately.
Bolt-On Arm 10”(BOA10)
*Unless specified a BOA6 will be supplied for S1 & D180 mounting. BOA10 supplied forall other mountingconfigurations.
t
100 (100)150 (150)175 (175)250 (250)320 (320)400 (400)
750 (750)1000 (1000)
Listed for wet locations
AREA LIGHTINGAREA LIGHTING
19645 Rancho Way • Rancho Dominguez, CA • 90220Tel: (310) 512-6480 • Fax: (310) 512-6486
www.visionairelighting.comVISIONAIRE LIGHTINGVISIONAIRE LIGHTING
For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice.
AR
EA
Polera SpecificationsHousing• All housings are manufactured using technologically ad-vanced computer numerical control (CNC) machinery. Preci-sion sheared and formed, .080 gauge, corrosion resistant aluminum.• The computerized CNC machinery enables all Polera housings to be constructed quickly, efficiently, and adher-ing to exacting ISO 9002 standards. All external hardware is stainless steel.
Lens and Door Assembly• Door assembly is CNC precision, sheared and formed from .080 corrosion resistant aluminum.• The lens is a tempered clear safety glass, secured by galvanized lens retainers and sealed with form fi tting silicone gasketing.
Optical System• Refl ector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in fi ve distribu-tion patterns.• Tool-less refl ector entry.• Field rotatable refl ector (except Type V).
Quali-Guard® Finish• The fi nish is a Quali-Guard® textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and fi nish hardness. All fi nishes are available in standard and custom colors.
Mounting• An extruded aluminum, bolt-on-arm (BOA) with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. A Round Pole Plate Adaptor (RPP) is required for mounting to 3” -5” Round Poles.
Electrical Assembly• All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit.• Quick disconnect wiring is standard.• Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K (5K for 1000 watt) and 600V.
Options• Fixtures available with a variety of options, including photo cell, quartz restrike, light shield, convex lens, and fusing. Please consult factory for custom options.
Listings• Polera is UL listed, suitable for damp and wet locations. All fi xtures factory tested prior to shipment.• Dark Sky Friendly® certifi ed by the International Dark Sky Association. (Flat Lens models with Type III or Type V Refl ectors)
5
EPA Data
Fixture with Bracket
POL-1POL-2
2.7 4.9 5.4 7.3 3.3 8.73.6 6.5 7.2 9.7 8.3 11.5
Cast Wall PlateBolt-On-Arm Detail
AR
EA
LumenStar AREA LIGHTINGAREA LIGHTINGDimensional Drawings
6
Model No. Optics Wattage Source Voltage Mounting Options
Model Optics Wattage Source Voltage Mounting Options
LSR-2
LSR-3
LSR-4
Type II(T2)
Type III(T3)
Type IV(T4)
Type IV-A*Automotive
(T4A)
Type V(T5)
PS, HPS MH, PS MH, PS, HPS PS
(M), (P), (S)
PS
PS
MH, PS, HPS
MH, PS, HPS
(M), (P), (S)
(M), (P), (S)
LSR
Bronze (BZ)Black (BK)White (WH)Green (GN)Grey (GY)Silver Metallic(SL)Custom (CC)
Finish
Finish
MH, PS, HPS
MH, PS, HPSPhoto Receptacle
*With Shorting Cap(PER)
Fusing*Single In-Line Fuse
(SF120) (SF277)*Double In-Line Fuse
(DF208) (DF240)(DF480)
Light Shield(LS)
Convex Glass Lens*Option Available on LSR-2 Only
(VLCG)RPP-1
*See Mounting Section forWallmount options
*Specify voltage
*Specify voltage
(RPP)Round Pole Plate Adaptor
Quartz Restrike (QR)
Bolt-On Arm 6”(BOA6)
Spider Mount(SM)
*Round Pole PlateAdaptors (RPP) are to be ordered separately.
Bolt-On Arm 10”(BOA10)
Photocell & Receptacle
(PC120) (PC208)(PC240) (PC277)
*Specify voltage
(PCR480)
120(1)
208(2)
240(3)
277(4)
480(5)
Multi-Tap ballast factory wired at 277v unlessotherwise specified.
M.Tap(6)
5- Tap(7)
Standard for 400 & 1000w MH only, factory wired at 480vunless otherwisespecified.
Supplied as standardfor LSR-2, unlessspecified otherwise.
Supplied as standardfor LSR-3 & 4, unlessspecified otherwise. Supplied for all LSRsizes with D90, T90& Quad mounting.
citp
epolevnEdecudeR*w0001nopmaL
epolevnEdecude*Rw0001nopmaL
150 (150)175 (175)250 (250)320 (320)400 (400)
400 (400)750 (750)1000 (1000)
750 (750)1000 (1000)
(Not AvailableLSR-2)
Fixture A B C
"32 "32 "01 w00
"32 "32 "31 w000
"32 "32 "51 w000
LSR-3
LSR-2
LSR-4
4
1
1
Max. Watts
400w
1000w
1000w
LSR-2LSR-3
LSR-4
23”
23”
19” 19”
23”
23”
12”
13”
15” 1000wFlat Glass Only
400wFlat Glass
(Convex Optional)
1000wConvex Glass Only
Listed for wet locations
The LumenStar blends architectural appeal with high perfor-mance vertical lamp optical technologies. Providing broad, uniform levels of light, LumenStar’s high effi ciency minimizes the number of fi xtures and poles needed to illuminate an area. Available in three enclosure sizes with fi ve distribution pat-terns, including a special forward throw Type IV-A refl ector for auto dealership front line lighting.A wide selection of light sources from 150 through 1000 watts
are offered, including Pulse Start lamps for exceptional ef-fi ciency, lumen maintenance and color stability.Design applications include shopping centers, parking lots, auto malls, and virtually any general outdoor area lighting. LumenStar is a versatile performer with a fl exible selection of mounting options and durable QualiGuard architectural fi nishes. Computerized state of the art machinery and qual-ity materials insure manufacturing to the highest industry standards.
A
B C
19645 Rancho Way • Rancho Dominguez, CA • 90220Tel: (310) 512-6480 • Fax: (310) 512-6486
www.visionairelighting.comVISIONAIRE LIGHTINGVISIONAIRE LIGHTING
For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice.
AR
EA
EPA Data
Fixture withBracket
LSR-2LSR-3LSR-4
2.2 4.0 4.4 6.0 5.1 7.1 2.63.2 5.8 6.4 8.7 7.4 10.2 3.73.4 6.2 6.8 9.2 7.8 10.9 3.9
Cast Wall PlateBolt-On-Arm Detail Spider Arm Detail
Spider Mount
LumenStar SpecificationsHousing• All housings are manufactured using technologically ad-vanced computer numerical control (CNC) machinery. Preci-sion sheared and formed, .080 gauge, corrosion resistant aluminum.• The computerized CNC machinery enables all LumenStar housings to be constructed quickly, efficiently, and adher-ing to exacting ISO 9002 standards. All external hardware is stainless steel.
Lens and Door Assembly• Door assembly is CNC precision sheared and formed from .063 corrosion resistant aluminum.• The standard lens is a fl at tempered clear safety glass, secured by galvanized lens retainers and sealed with form fi tting silicone gasketing.
Optical System• Refl ector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in fi ve distribu-tion patterns.• Tool-less refl ector entry.• Field rotatable refl ector (except Type V).
Quali-Guard® Finish• The fi nish is a Quali-Guard® textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors.
Mounting• An extruded aluminum, bolt-on-arm (BOA), with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. A Round Pole Plate Adaptor (RPP) is required for mounting to 3” -5” Round Poles.
Electrical Assembly• All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit.• Quick disconnect wiring is standard.• Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K (5K for 1000 watt) and 600V.
Options• Fixtures available with a variety of options, including photo cell, quartz restrike, horizontal or vertical lamp optics, light shield, convex lens and fusing. Please consult factory for custom options.
Listings• LumenStar is UL listed, suitable for damp and wet locations. • Dark Sky Friendly® certifi ed by the International Dark Sky Association. (Flat Lens models with Type III or Type V Refl ectors)
7
AR
EA
Hillsboro AREA LIGHTINGAREA LIGHTINGDimensional Drawings
8
Fixture A B C
"32 "32 "01 w
"32 "32 "31 w
"32 "32 "51 w
HLS-2
HLS-3
HLS-4
sttaW.xaM
00
000
400w
1000w
1000wHLS-4
23”
23”
19” 19”
23”
23”
12”
13”
15” 1000wFlat Glass Only
1000wConvex Glass Only HLS-3
HLS-2 400wFlat Glass
(Convex Optional)
Model No. Optics Wattage Source Voltage Mounting Finish Options
Model Optics Wattage Source Voltage Mounting Finish Options
HLS-2
HLS-3
Type II
HLS-4
(T2)
Type III(T3)
Type IV(T4)
Type IV-A*Automotive
(T4A)
Type V(T5)
*Reduced EnvelopeLamp on 1000w
*Reduced EnvelopeLamp on 1000w
PS, HPS
(M), (P), (S)
MH, PS MH, PS, HPS
MH, PS, HPS
HLS
150 (150)175 (175)250 (250)320 (320)400 (400)
400 (400)750 (750)1000 (1000)
750 (750)1000 (1000)
PS
PS
MH, PS, HPS
MH, PS, HPS
(M), (P), (S)
(M), (P), (S)
Bronze (BZ)Black (BK)White (WH)Green (GN)Grey (GY)Silver Metallic(SL)Custom (CC)
PS
Photo Receptacle*With Shorting Cap
(PER)
Fusing*Single In-Line Fuse
(SF120) (SF277)*Double In-Line Fuse
(DF208) (DF240)(DF480)
Light Shield(LS)
Convex Glass Lens*Option Available on HLS-2 Only
(VLCG)RPP-1
*See Mounting Section forWallmount options
*Specify voltage
*Specify voltage
(RPP)Round Pole Plate Adaptor
Quartz Restrike (QR)
(Not AvailableHLS-2)
Bolt-On Arm 6”(BOA6)
Spider Mount(SM)
*Round Pole PlateAdaptors (RPP) are to be ordered separately.
Bolt-On Arm 10”(BOA10)
MH, PS, HPS
Photocell & Receptacle
(PC120) (PC208)(PC240) (PC277)
*Specify voltage
(PCR480)
120(1)
208(2)
240(3)
277(4)
480(5)
Multi-Tap ballast factory wired at 277v unlessotherwise specified.
M.Tap(6)
5- Tap(7)
Standard for 400 & 1000w MH only, factory wired at 480vunless otherwisespecified.
Supplied as standardfor HLS-2, unlessspecified otherwise.
Supplied as standardfor HLS-3 & 4, unlessspecified otherwise. Supplied for all HLSsizes with D90, T90& Quad mounting.
Listed for wet locations
The Hillsboro offers high performance vertical lamp optical technologies with upscale architectural styling. The crisp lines of the housing are highlighted with a distinctive deep-set reveal. Advanced optics provide wide, uniform levels of illumination, while minimizing the number of fi xtures and poles required to illuminate an area. Available in three enclosure sizes with fi ve distribution patterns, including a special forward throw Type IV-A refl ector for auto dealership front line lighting. A wide selection of light sources from 150 through 1000 watts
are offered, including Pulse Start lamps for exceptional ef-fi ciency, lumen maintenance and color stability.Hillsboro is an excellent choice for shopping centers, parking lots, auto malls, and general outdoor area lighting. Versatile mounting options are available, and a selection of durable Quali-Guard architectural fi nishes enhance the application design. Computerized state of the art machinery and qual-ity materials insure manufacturing to the highest industry standards.
* Flat lens models are certifi ed IDA Dark Sky Friendly
19645 Rancho Way • Rancho Dominguez, CA • 90220Tel: (310) 512-6480 • Fax: (310) 512-6486
www.visionairelighting.comVISIONAIRE LIGHTINGVISIONAIRE LIGHTING
For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice.
AR
EA
Hillsboro SpecificationsHousing• All housings are manufactured using technologically ad-vanced computer numerical control (CNC) machinery. Preci-sion sheared and formed, .080 gauge, corrosion resistant aluminum.• The computerized (CNC) machinery enables all Hillsboro housings to be constructed quickly, efficiently, and adher-ing to exacting ISO 9002 standards. All external hardware is stainless steel.
Lens and Door Assembly• Door assembly is (CNC) precision sheared and formed from .080 corrosion resistant aluminum.• The standard lens is a flat, tempered, clear safety glass, secured by galvanized steel lens retainers and sealed with form fi tting silicone gasketing.
Optical System• Refl ector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in fi ve distribu-tion patterns.• Tool-less refl ector entry.• Field rotatable refl ector (except Type V).
Quali-Guard® Finish• The fi nish is a Quali-Guard® textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors.
Mounting• An extruded aluminum, bolt-on-arm (BOA), with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. A Round Pole Plate (RPP) is required for mounting to 3” -5” Round Poles.
Electrical Assembly• All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit.• Quick disconnect wiring is standard.• Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K (5K for 1000 watt) and 600V.
Options• Fixtures available with a variety of options, including photo cell, quartz restrike, horizontal or vertical lamp optics, light shield, convex lens and fusing. Please consult factory for custom options.
Listings• Hillsboro is UL listed, suitable for damp and wet locations.• Dark Sky Friendly® certifi ed by the International Dark Sky Association. (Flat Lens models with Type III or Type V Refl ectors)
9
HLS-3 & HLS-4
HLS-1 & HLS-2
EPA Data
Fixture withBracket
HLS-2HLS-3HLS-4
2.2 4.0 4.4 6.0 5.1 7.1 2.63.2 5.8 6.4 8.7 7.4 10.2 3.73.4 6.2 6.8 9.2 7.8 10.9 3.9
Cast Wall PlateBolt-On-Arm Detail Spider Arm Detail
Spider Mount
AR
EA
AutoLux AREA LIGHTINGAREA LIGHTING
ALX-1A B
24”1000w400w
C16” 8”
ALX-2 27” 21” 9”
Max. Watt
Dimensional Drawings
Fixture
Model No. Optics Wattage Source Voltage Mounting Finish Options
Model Optics Wattage Source Voltage Mounting Finish Options
ALX-1
ALX-2
ALX
HPS MH
(M), (P), (S)
MH, HPS
MH, HPS
PS
PS
MH, PS, HPS (M), (P), (S)
Bronze (BZ)Black (BK)White (WH)Green (GN)Grey (GY)
Silver Metallic(SL)
Custom (CC)
Photo Receptacle*With Shorting Cap
(PER)
Fusing*Single In-Line Fuse
(SF120) (SF277)*Double In-Line Fuse
(DF208) (DF240)(DF480)
Light Shield(LS)
RPP-1
*See Mounting Section forWallmount options
*Specify voltage
*Specify voltage
(RPP)Round Pole Plate Adaptor
Quartz Restrike (QR)
Knuckle Mount(KM)
Bolt-On Arm 6”(BOA6)
*Round Pole PlateAdaptors (RPP) are to be ordered separately.
Bolt-On Arm 10”(BOA10)
*Unless specified a BOA6 will be supplied for S1 & D180 mounting. BOA10 supplied forall other mountingconfigurations.
Photocell & Receptacle
(PC120) (PC208)(PC240) (PC277)
*Specify voltage
(PCR480)
120(1)
208(2)
240(3)
277(4)
480(5)
Multi-Tap ballast factory wired at 277v unlessotherwise specified.
M.Tap(6)
5- Tap(7)
Standard for 400 & 1000w MH only, factory wired at 480vunless otherwisespecified.
Type III(T3)
Type IV(T4)
Type V(T5)
Type IVSport(T4S)
Type IVAutpmotive(T4A)
Type II(T2)
t
150 (150)175 (175)250 (250)320 (320)400 (400)
750 (750)1000 (1000)
Listed for wet locations
The AutoLux is a low profi le architectural luminaire providing high performance and excellent value for a wide range of outdoor light-ing applications. AutoLux features a horizontal lamp, fl at lens de-sign and high effi ciency optics with IES Full Cut-Off classifi cation and Dark Sky friendly certifi cation to eliminate light trespass and light pollution.
Design applications include shopping centers, parking lots, auto dealerships, tennis and other outdoor sports lighting installations. Six high effi ciency refl ector systems are available, including a spe-
cial Type IV Tennis/Sport refl ector for optimum forward throw distri-bution and superior visibility on playing surfaces.
AutoLux is available in two housing sizes for 150 through 1000 watt HID lamps, including Pulse Start for exceptional effi ciency, lumen maintenance and color stability. AutoLux offers a versatile selection of mounting options and durable QualiGuard architec-tural fi nishes to match the application. Computerized state of the art machinery and quality materials insure manufacturing to the highest quality standards.
10
19645 Rancho Way • Rancho Dominguez, CA • 90220Tel: (310) 512-6480 • Fax: (310) 512-6486
www.visionairelighting.comVISIONAIRE LIGHTINGVISIONAIRE LIGHTING
For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice.
AR
EA
AutoLux Specifications
HLS-1 & HLS-2
EPA Data
Fixture with Bracket
ALX-1ALX-2
2.1 3.8 4.2 5.7 4.8 6.82.6 4.7 5.2 7.0 6.0 8.4
Cast Wall PlateBolt-On-Arm Detail Adjustable Knuckle
Housing• All housings are manufactured using technologically ad-vanced computer numerical control (CNC) machinery. Preci-sion sheared and formed, .080 gauge, corrosion resistant aluminum.• The computerized CNC machinery enables all AutoLux housings to be constructed quickly, efficiently, and adher-ing to exacting ISO 9002 standards. All external hardware is stainless steel.
Lens and Door Assembly• Door assembly is CNC precision sheared and formed from .080 corrosion resistant aluminum.• The lens is a tempered clear safety glass, secured by galvanized lens retainers and sealed with form fi tting silicone gasketing.
Optical System• Refl ector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in six distribu-tion patterns.• Tool-less refl ector entry.• Field rotatable refl ector (except Type V).
Quali-Guard® Finish • The fi nish is a Quali-Guard® textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit. to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors.
Mounting• An extruded aluminum, bolt-on-arm (BOA) with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. A Round Pole Plate Adaptor (RPP) is required for mounting to 3” -5” Round Poles.
Electrical Assembly• All ballasts are premium grade CWA or HPF regulating auto trans-formers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit.• Quick disconnect wiring is standard.• Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K (5K for 1000 watt) and 600V.
Options• Fixtures available with a variety of options, including photo cell, quartz restrike, light shield, and fusing. Please consult factory for custom options.
Listings• AutoLux is UL listed, suitable for damp and wet locations. • Dark Sky Friendly® certifi ed by the International Dark Sky Association. (Flat Lens models with Type IV or Type V Refl ectors)
11
AR
EA
ParkingStarDimensional Drawings
PST-1Fixture
17”C Max. Watt8”
BA
12
Model No. Optics Wattage Source Voltage Mounting Options
Model Optics Wattage Source Voltage Mounting Options
PST-1
Knuckle Mount(KM)
PST
PS, HPS PS, HPS PS, HPS
(M), (P), (S)
MH HPS
MH, HPS
MH, HPS PS,
Bronze (BZ)Black (BK)White (WH)Green (GN)Grey (GY)
Silver Metallic(SL)
Custom (CC)
Finish
Finish
Photo Receptacle*With Shorting Cap
(PER)
Fusing*Single In-Line Fuse
(SF120) (SF277)*Double In-Line Fuse
(DF208) (DF240)(DF480)
Light Shield(LS)
Convex Glass Lens*Vertical Lamp
(VLCG)RPP-1
*See Mounting Sectionfor Wallmount options
*Specify voltage
*Specify voltage
(RPP)Round Pole Bolt-On Arm
Quartz Restrike (QR)
Bolt-On Arm 6”(BOA6)
*Round Pole specifyRPP option.
Bolt-On Arm 10”(BOA10)
*Unless specified a BOA6 will be supplied for S1 & D180 mounting. BOA10 supplied forall other mountingconfigurations.
*HydroformedReflector
Type IV and V Segmented.
Photocell & Receptacle
(PC120) (PC208)(PC240) (PC277)
*Specify voltage
(PCR480)
120(1)
208(2)
240(3)
277(4)
480(5)
Multi-Tap ballast factory wired at 277v unless otherwise specified.
M.Tap(6)
5- Tap(7)
Standard for 400w MH only,factory wired at 480v unless otherwise specified. Type III Segmented
Reflector(SR3)
Type I*(T1)
Type III*(T3)
Type IV(T4)
Type V(T5)
Type II*(T2)
t
70 (70)100 (100)150 (150)175 (175)200 (250)250 (250)320 (320)400 (400)
Listed for wet locations 17” 400w*Flat Glass (Convex Optional)
The ParkingStar luminaire combines sleek architectural styling with ad-vanced optics for superior performance in area and site lighting applica-tions. The fl at lens, vertical lamp, IES full cut-off luminaire is Dark Sky certifi ed to restrict light trespass, glare and light pollution for neighborhood-friendly outdoor lighting.
The compact, low profi le die-cast housing features soft rounded contours for a contemporary upscale appearance. Durable polyester powder coat fi nish is available in a wide array of architectural colors to enhance the de-sign application. Computerized precision machinery and quality materials insure manufacturing to the highest industry standards.
ParkingStar is offered in fi ve IES distribution patterns. High effi ciency pho-tometric performance and exceptional uniformity allow the use of fewer fi xtures and poles with wider spacings, providing substantial equipment, installation and energy cost savings.
The ParkingStar is a versatile and economical luminaire for shopping cen-ters, parking lots, street lighting, auto dealerships and general area lighting. A wide selection of light sources from 70 through 400 watts are offered, including Pulse Start lamps for excellent effi ciency, lumen maintenance and color. Convex lens is available where light trespass restrictions do not apply.
AREA LIGHTINGAREA LIGHTING
19645 Rancho Way • Rancho Dominguez, CA • 90220Tel: (310) 512-6480 • Fax: (310) 512-6486
www.visionairelighting.comVISIONAIRE LIGHTINGVISIONAIRE LIGHTING
For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice.
AR
EA
EPA Data
Fixture with Bracket
PST-1 1.6 2.9 3.2 4.3 3.7 5.1
EPA Data
Adjustable Knuckle
Cast Wall PlateBolt-On-Arm Detail Adjustable Knuckle
Housing• Rugged, one piece die-cast, soft corner aluminum housing with 0.12 inch nominal wall thickness• All external hardware is rust resistant stainless steel.
Lens and Door Assembly• Die-cast external door frame is fully gasketed. A one piece extruded silicone gasket seals the door frame against the housing.• The lens is a fl at, tempered, clear safety glass.
Optical System• Refl ector is precision hydroformed or CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in fi ve distribution patterns.• Tool-less refl ector entry.• Field rotatable refl ector (except Type V).
Quali-Guard® Finish• The fi nish is a Quali-Guard® textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors.
Mounting• An extruded aluminum, bolt-on-arm (BOA), with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. Electrical Assembly• All ballasts are premium grade CWA or HPF regulating auto trans-formers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit.• Quick disconnect wiring is standard.• Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K and 600V.
Options• Fixtures available with a variety of options, including photo cell, quartz restrike, light shield, convex glass lens and fusing. Please consult factory for custom options.
Listings• ParkingStar is UL listed, suitable for damp and wet locations.• Dark Sky Friendly® certified by the International Dark Sky Association. (Flat Lens models with Type IV or Type V Refl ectors)
13
ParkingStar SpecificationsA
REA
Toronto AREA LIGHTINGAREA LIGHTING
A B
C
TRO-1A B
24” 400w1000w
C17” 10.5”
TRO-2 29 1/4” 23” 11”
Max. Watt
Dimensional Drawings
Fixture
14
Model No. Optics Wattage Source Voltage Mounting Options
Model Optics Wattage Source Voltage Mounting Options
TRO-1
TRO-2
TRO
* 1000 watt MH vertical lamp available only in convex.
PS, HPS PS, HPS PS, HPS
(M), (P), (S)
MH, PS* MH, PS*, HPS
MH, PS*, HPS PS,
Bronze (BZ)Black (BK)White (WH)Green (GN)Grey (GY)Silver Metallic(SL)Custom (CC)
Finish
Finish
Photo Receptacle*With Shorting Cap
(PER)
Fusing*Single In-Line Fuse
(SF120) (SF277)*Double In-Line Fuse
(DF208) (DF240)(DF480)
Light Shield(LS)
Convex Glass Lens(VLCG)
RPP-1
*See Mounting Section forWallmount options
*Specify voltage
*Specify voltage
(RPP)Round Pole Plate Adaptor
Quartz Restrike (QR)
*Veritical lamp,Convex Lens Only
Size 2 only
Photocell & Receptacle
(PC120) (PC208)(PC240) (PC277)
*Specify voltage
(PCR480)
120(1)
208(2)
240(3)
277(4)
480(5)
M.Tap(6)
5- Tap(7)
Multi-Tap ballast factory wired at 277v unlessotherwise specified.
Standard for 400 & 1000w MH only, factory wired at 480vunless otherwisespecified.
Bolt-On Arm 6”(BOA6)
*Round Pole PlateAdaptors (RPP) are to be ordered separately.
Bolt-On Arm 10”(BOA10)
*Unless specified a BOA6 will be supplied for S1 & D180 mounting. BOA10 supplied forall other mountingconfigurations.
Type III(T3)
Type IV(T4)
Type V(T5)
Type IVSport(T4S)
Type IVAutpmotive(T4A)
Type II(T2)
t
70 (70)100 (100)150 (150)175 (175)250 (250)320 (320)400 (400)
750 (750)1000 (1000)
PS MH, PS, HPS
(M), (P), (S)
Listed for wet locations
The Toronto features sleek architectural styling with high performance horizontal lamp/fl at glass lens optical systems. The durable, low profi le housing has soft rounded corners for a contemporary upscale appearance. Available in two enclosure sizes with six distribution patterns, including a special forward throw Type IV-A refl ector for auto dealership front line light-ing. A wide selection of light sources from 70 through 1000 watts are offered, including Pulse Start lamps for exceptional effi ciency, lumen maintenance and color stability.
Toronto is an ideal choice for shopping centers, parking lots, street lighting, auto malls, and general outdoor area lighting. Pole and wall mounting options are available, and a selection of durable QualiGuard architectural fi nishes complement the application design. Computerized state of the art machinery and quality materials insure manufacturing to the highest industry standards.
19645 Rancho Way • Rancho Dominguez, CA • 90220Tel: (310) 512-6480 • Fax: (310) 512-6486
www.visionairelighting.comVISIONAIRE LIGHTINGVISIONAIRE LIGHTING
For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice.
AR
EA
EPA Data
Fixture with Bracket
TRO-1 2.6 4.7 5.2 7.0 6.0 8.3TRO-2 3.0 5.4 6.0 8.1 6.9 9.6
RPPCast Aluminum Radiused Pole Plate Adaptorfor RoundPoles
Cast Wall PlateBolt-On-Arm Detail
Toronto SpecificationsHousing• All housings are manufactured using technologically advanced computer numerical control (CNC) machinery. Precision sheared and formed, .080 gauge, corrosion resistant aluminum.
• The computerized CNC machinery enables all Toronto housings to be constructed quickly, effi ciently, and adhering to exacting ISO 9002 standards. All external hardware is stainless steel.
Lens and Door Assembly• Door assembly is extruded aluminum.• The standard lens is a fl at tempered clear safety glass, secured by galvanized lens retainers and sealed with form fi tting silicone gasketing.
Optical System• Refl ector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in six distribu-tion patterns.• Tool-less refl ector entry.• Field rotatable refl ector (except Type V).
Quali-Guard® Finish• The fi nish is a Quali-Guard® textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors.
Mounting• An extruded aluminum, bolt-on-arm (BOA) with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. A Round Pole Plate Adaptor (RPP) is required for mounting to 3” -5” Round Poles.
Electrical Assembly• All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit.• Quick disconnect wiring is standard.• Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K (5K for 1000 watt) and 600V.
Options• Fixtures available with a variety of options, including photo cell, quartz restrike, light shield, convex lens, horizontal or vertical lamp optics, and fusing. Please consult factory for custom options.
Listings• Toronto is UL listed, suitable for damp and wet locations.
15
AR
EA
American Round AREA LIGHTINGAREA LIGHTING
Fixture A B epirtS sttaW.xaM"22 "�-31 "2 w004
"62 "�-51 "2 w0001
"22 "�-31 "2 w004
"62 "�-51 "2 w0001
AMR-N1AMR-N2AMR-D1AMR-D2
*Flat Glass (Convex Optional)
*Flat Glass (Convex Optional)
*Flat Glass (Convex Optional)
*Flat Glass (Convex Optional)
¼
¼
¼
¼
Dimensional DrawingsAMR-N AMR-D
16
1N-RMA
2N-RMA
2D-RMA
001 )001(051 )051(571 )571(002 )002(052 )052(023 )023(004 )004(
004 )004(057 )057(0001 )0001(
epolevnEdecudeR*w0001nopmaL
SPH,SPSPH,SP
SMH, PSP
SPH,SP,HMSP
SPH,SP,HMS(,)P(,)M( )
SPH,SP,HMSP
S(,)P(,)M( )
eznorB)ZB(kcalB)KB(etihW)HW(neerG
)NG(yerG)YG(
cillateMrevliS)LS(
motsuC)CC(
epirtSroloCcillateMeulB )49(
euqapOdeR )881(
cillateMrevliS )85(
cillateMdloG )14(
euqapOetihW )05(
cillateMkcalB )06(
laocrahC cillateM )02(
Model Optics Wattage Source Voltage Mounting Finish/Stripe Options
Model No. Wattage Source Voltage Mounting Finish / Stripe OptionsOpticst
AMR-D1
AMR
SPH,SP,HM
Photo Receptacle*With Shorting Cap
(PER)
Fusing*Single In-Line Fuse
(SF120) (SF277)*Double In-Line Fuse
(DF208) (DF240)(DF480)
Light Shield(LS)
Convex Glass Lens(VLCG)
RPP-1
*See Mounting Section forWallmount options
*Specify voltage
*Specify voltage
(RPP)Round Pole Plate Adaptor
Quartz Restrike (QR)
Bolt-On Arm 6”(BOA6)
Spider Mount(SM)
*Round Pole PlateAdaptors (RPP) are to be ordered separately.
Bolt-On Arm 10”(BOA10)
*Unless specified a BOA6 will be supplied for S1 & D180 mounting. BOA10 supplied forall other mountingconfigurations.
Photocell & Receptacle
(PC120) (PC208)(PC240) (PC277)
*Specify voltage
(PCR480)
120(1)
208(2)
240(3)
277(4)
480(5)
M.Tap(6)
5- Tap(7)
Multi-Tap ballast factory wired at 277v unlessotherwise specified.
Standard for 400 & 1000w MH only, factory wired at 480vunless otherwisespecified.
Type II(T2)
Type III(T3)
Type IV(T4)
Type IV-A*Automotive
(T4A)
Type V(T5)
(Not AvailableAMR-N1 & D1)
Listed for wet locations
The American Round Series combines contemporary architectural styling with advanced optics for superior performance in area and site lighting ap-plications. The fl at lens, vertical lamp, IES full cut-off luminaire is Dark Sky certifi ed to restrict light trespass, glare and light pollution for neighborhood-friendly outdoor lighting.
The cylindrical housing features soft rounded contours in dome or fl at top styles. A decorative circular reveal accents the shape with complementary or contrasting colors. Computerized precision machinery and quality materials insure manufacturing to the highest industry standards. American Round is offered in two enclosure sizes and fi ve distribution patterns, including a
special forward throw Type IV-A refl ector for auto dealership front line lighting. High effi ciency photometric performance and exceptional uniformity allow the use of fewer fi xtures and poles with wider spacings, providing substantial equipment, installation and energy cost savings.
The American Round is a proven performer for parking lots, auto dealer-ships, shopping centers, and general area lighting. A wide selection of light sources from 100 through 1000 watts are offered, including Pulse Start lamps for excellent effi ciency, lumen maintenance and color. Convex lens is available where light trespass restrictions do not apply.
19645 Rancho Way • Rancho Dominguez, CA • 90220Tel: (310) 512-6480 • Fax: (310) 512-6486
www.visionairelighting.comVISIONAIRE LIGHTINGVISIONAIRE LIGHTING
For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice.
AR
EA
EPA Data
Fixture withBracket
AMR-N1AMR-N2AMR-D1AMR-D2
2.2 4.0 4.4 6.0 5.1 7.1 2.42.9 5.2 5.8 7.8 6.7 9.3 3.12.2 4.0 4.4 6.0 5.1 7.1 2.42.9 5.2 5.8 7.8 6.7 9.3 3.1
Cast Wall PlateBolt-On-Arm Detail Spider Arm Detail
Spider Mount
American Round SpecificationsHousing• All housings are one piece, spun aluminum, designed and engineered for a weathertight seal. American Round housings display a decorative external reveal to give the luminaires a distinct appearance. All external hardware is stainless steel.
Lens and Door Assembly• Door assembly is precision spun one piece .080 gauge corrosion resistant aluminum with captive stainless steel fasteners. • The standard lens is a clear tempered fl at glass, secured by galvanized lens retainers and sealed with one piece extruded silicone gasketing to provide complete weather and insect protection.
Optical System• Refl ector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in fi ve distribu-tion patterns.• Tool-less refl ector entry.• Field rotatable refl ector (except Type V).
Quali-Guard® Finish• The fi nish is a Quali-Guard® textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors.
Mounting• An extruded aluminum, bolt-on-arm (BOA), with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. A Round Pole Plate Adaptor (RPP) is required for mounting to 3” -5” Round Poles.
Electrical Assembly• All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit.• Quick disconnect wiring is standard.• Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K (5K for 1000 watt) and 600V.
Options• Fixtures available with a variety of options, including photo cell, photo receptacle, convex glass lens, light shield, and fusing. Please consult factory for custom options.
Listings• American Round is UL listed, suitable for damp and wet locations.• Dark Sky Friendly® certifi ed by the International Dark Sky Association. (Flat Lens models with Type III or Type V Refl ectors)
17
AR
EA
Concourse AREA LIGHTINGAREA LIGHTING
18
25” 1000w13 5/8”CON-1 20” 400w11”
CON-2
Dimensional Drawings
Fixture Max. WattBA
Model No. Optics Wattage Source Voltage Mounting Options
Model Optics Wattage Source Voltage Mounting Options
CON-1
CON-2
CON
PS, HPS
(M), (P), (S)
MH, PS, HPS MH, PS
MH, PS, HPS PS,
PS MH, PS, HPS
(M), (P), (S)
Bronze (BZ)Black (BK)White (WH)Green (GN)Grey (GY)Silver Metallic(SL)Custom (CC)
Finish
Finish
Photo Receptacle*With Shorting Cap
(PER)
Fusing*Single In-Line Fuse
(SF120) (SF277)*Double In-Line Fuse
(DF208) (DF240)(DF480)
Light Shield(LS)
Convex Glass Lens*Option Available on CON-2 Only
(VLCG)RPP-1
*See Mounting Section forWallmount options
*Specify voltage
*Specify voltage
(RPP)Round Pole Plate Adaptor
Quartz Restrike (QR)
IIepyT)2T(
IIIepyT)3T(
VIepyT)4T(
A-VIepyTevitomotuA*
)A4T(
VepyT)5T(
PS, HPS
MH, PS, HPS
Photocell & Receptacle
(PC120) (PC208)(PC240) (PC277)
*Specify voltage
(PCR480)
120(1)
208(2)
240(3)
277(4)
480(5)
M.Tap(6)
5- Tap(7)
Multi-Tap ballast factory wired at 277v unlessotherwise specified.
Standard for 400 & 1000w MH only, factory wired at 480vunless otherwisespecified.
Bolt-On Arm 6”(BOA6)
Spider Mount(SM)
*Round Pole PlateAdaptors (RPP) are to be ordered separately.
Bolt-On Arm 10”(BOA10)
*Unless specified a BOA6 will be supplied for S1 & D180 mounting. BOA10 supplied forall other mountingconfigurations.
t
100 (100)150 (150)175 (175)250 (250)320 (320)400 (400)
400 (400)750 (750)1000 (1000)
(Available CON-2with VLCG only)
Listed for wet locations
The Concourse Series blends contemporary architectural styling with advanced optics for superior performance in area and site lighting appli-cations. The fl at lens, vertical lamp, IES full cut-off luminaire is Dark Sky certifi ed to restrict light trespass, glare and light pollution for neighborhood-friendly outdoor lighting.
The cylindrical housing features a smoothly contoured dome top and three decorative circular reveals to accent the shape. Computerized precision machinery and quality materials insure manufacturing to the highest indus-try standards. The Concourse is offered in two enclosure sizes and fi ve distribution patterns, including a special forward throw Type IV-A refl ector
for auto dealership front line lighting. High effi ciency photometric perfor-mance permits the use of fewer fi xtures and poles with wider spacings, providing substantial equipment, installation and energy cost savings.
Concourse is an excellent choice for shopping centers, auto dealer-ships, parking lots, and general area lighting. A wide selection of light sources from 150 through 1000watts are offered, including Pulse Start lamps for better effi ciency, lumen maintenance and color. Convex lens is available where light trespass restrictions do not apply.
* Flat lens models are certifi ed IDA Dark Sky Friendly
19645 Rancho Way • Rancho Dominguez, CA • 90220Tel: (310) 512-6480 • Fax: (310) 512-6486
www.visionairelighting.comVISIONAIRE LIGHTINGVISIONAIRE LIGHTING
For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice.
AR
EA
EPA Data
Fixture withBracket
CON-1CON-2
2.4 4.3 4.8 6.5 5.3 7.73.2 5.8 6.4 8.6 7.4 10.2
Cast Wall PlateBolt-On-Arm Detail Spider Arm Detail
2.63.5
Spider Mount
Concourse SpecificationsHousing• All housings are one piece, spun aluminum, designed and engineered for a weathertight seal. Concourse housings display decorative external reveals to give the luminaires a distinct appearance. All external hardware is stainless steel.
Lens and Door Assembly• Door assembly is precision spun one piece .080 gauge corrosion resistant aluminum with captive stainless steel fasteners. • The standard lens is a clear tempered fl at glass, secured by galvanized lens retainers and sealed with one piece extruded silicone gasketing to provide complete weather and insect protection.
Optical System• Refl ector is precision CNC cut and bent, multi-faceted, seg-mented, highly effi cient, 95% refl ective aluminum. Available in fi ve distribution patterns.• Tool-less refl ector entry.• Field rotatable refl ector (except Type V).
Quali-Guard® Finish• The fi nish is a Quali-Guard® textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat fi nish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors.
Mounting• An extruded aluminum, bolt-on-arm (BOA), with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard.A Round Pole Plate Adaptor (RPP) is required for mounting to 3” -5” Round Poles.
Electrical Assembly• All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit.• Quick disconnect wiring is standard.• Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K (5K for 1000 watt) and 600V.
Options• Fixtures available with a variety of options, including photo cell, photo receptacle, convex glass lens, light shield, and fusing. Please consult factory for custom options.
Listings• Concourse is UL listed, suitable for damp and wet locations.• Dark Sky Friendly® certifi ed by the International Dark Sky Association. (Flat Lens models with Type III or Type V Refl ectors)
19
AR
EA
AREA LIGHTINGAREA LIGHTING
CAR-HT1A B
CAR-HT2
Max. WattFixture
Dimensional DrawingsCaribbean
Caribbean Hard-Top
Model No. Optics Wattage Source Voltage Mounting Options
Model Optics Wattage Source Voltage Mounting OptionsHard-Top
CAR-HT1
CAR-HT2
CAR
PS, HPS
MH, PS
MH, PS, HPS
(M), (P), (S)
PS MH, PS, HPS
(M), (P), (S)
PS, HPSBronze (BZ)Black (BK)White (WH)Green (GN)Grey (GY)Silver Metallic(SL)Custom (CC)
Finish
Finish
Photo Receptacle*With Shorting Cap
(PER)
Fusing*Single In-Line Fuse
(SF120) (SF277)*Double In-Line Fuse
(DF208) (DF240)(DF480)
Light Shield(LS)
Convex Glass Lens*Option Available on CAR- HT2 Only
(VLCG)RPP-1
*See Mounting Section forWallmount options
*Specify voltage
*Specify voltage
(RPP)Round Pole Plate Adaptor
Quartz Restrike (QR)
Photocell & Receptacle
(PC120) (PC208)(PC240) (PC277)
*Specify voltage
(PCR480)
120(1)
208(2)
240(3)
277(4)
480(5)
M.Tap(6)
5- Tap(7)
Multi-Tap ballast factory wired at 277v unlessotherwise specified.
Standard for 400w MH only,factory wired at 480v unless otherwise specified.
Type II(T2)
Type III(T3)
Type IV(T4)
Type V(T5)
Bolt-On Arm 6”(BOA6)
Spider Mount(SM)
*Round Pole PlateAdaptors (RPP) are to be ordered separately.
Bolt-On Arm 10”(BOA10)
*Unless specified a BOA6 will be supplied for S1 & D180 mounting. BOA10 supplied forall other mountingconfigurations.
t
100 (100)150 (150)175 (175)
250 (250)320 (320)400 (400)
18” 10” 175w 22” 12” 400w Listed for wet locations
20
The Caribbean Series combines bold architectural styling with advanced optics for superior performance in area and site lighting applications. The fl at lens, vertical lamp, IES full cut-off luminaire is Dark Sky certifi ed to re-strict light trespass, glare and light pollution for neighborhood-friendly out-door lighting.
The cylindrical housing features a distinctive dome shape with a comple-mentary circular decorative reveal. Durable polyester powder coat fi nish is available in a wide array of architectural colors to enhance the design ap-plication. Computerized precision machinery and quality materials insure manufacturing to the highest industry standards.
Caribbean is offered in two enclosure sizes and four IES distribution pat-terns. High effi ciency photometric performance and exceptional uniformity allow the use of fewer fi xtures and poles with wider spacings, providing substantial equipment, installation and energy cost savings.
The Caribbean is a superb choice for shopping centers, parking lots, auto dealerships and general area lighting. A wide selection of light sources from 100 through 400 watts are offered, including Pulse Start lamps for excellent effi ciency, lumen maintenance and color. Convex lens is available where light trespass restrictions do not apply.
19645 Rancho Way • Rancho Dominguez, CA • 90220Tel: (310) 512-6480 • Fax: (310) 512-6486
www.visionairelighting.comVISIONAIRE LIGHTINGVISIONAIRE LIGHTING
For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice.
AR
EA
Caribbean Specifications
EPA Data
Fixture with Bracket
CAR-1CAR-2
2.0 3.6 4.0 5.4 4.6 6.42.6 4.7 5.2 7.0 6.0 8.3
Cast Wall PlateBolt-On-Arm Detail Spider Arm Detail
2.22.9
Spider Mount
Housing• All housings are one piece, spun aluminum, designed and engineered for a weathertight seal. Caribbean housings dis-play a decorative external reveal to give the luminaires a distinct appearance. All external hardware is stainless steel.
Lens and Door Assembly• Door assembly is precision spun one piece .080 gauge corrosion resistant aluminum with captive stainless steel fasteners. • The standard lens is a clear tempered fl at glass, secured by galvanized lens retainers and sealed with one piece extruded silicone gasketing to provide complete weather and insect protection.
Optical System• Refl ector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in four distribu-tion patterns.• Tool-less refl ector entry.• Field rotatable refl ector (except Type V).
Quali-Guard® Finish• The fi nish is a Quali-Guard® textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors.
Mounting• An extruded aluminum, bolt-on-arm (BOA), with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. A Round Pole Plate Adaptor (RPP) is required for mounting to 3” -5” Round Poles.
Electrical Assembly• All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit.• Quick disconnect wiring is standard.• Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K and 600V.
Options• Fixtures available with a variety of options, including photo cell, photo receptacle, convex glass lens, light shield, and fusing. Please consult factory for custom options.
Listings• Caribbean is UL listed, suitable for damp and wet locations.• Dark Sky Friendly® certifi ed by the International Dark Sky Association. (Flat Lens models with Type III or Type V Refl ectors)
21
AR
EA
AREA LIGHTINGAREA LIGHTINGDimensional Drawings
The OrbiStar Series blends distinctive architectural styling with advanced optics for superior performance in area and site lighting applications. The fl at lens, vertical lamp, IES full cut-off luminaire is Dark Sky certifi ed to restrict light trespass, glare and light pollution for neighborhood-friendly outdoor lighting.
The unique rounded, “orbital” style housing features a deep set circular decorative reveal in an optional contrasting color. Durable polyester powder coat fi nish is available in a wide array of architectural colors to enhance the design application. Computerized precision machinery and quality materials insure manufacturing to the highest industry standards
OrbiStar is offered in four IES distribution patterns. High effi ciency pho-tometric performance and exceptional uniformity allow the use of fewer fi xtures and poles with wider spacings, providing substantial equipment, installation and energy cost savings.
The OrbiStar is an excellent choice for shopping centers, parking lots, auto dealerships and general area lighting. A wide selection of light sources from 70 through 400 watts are offered, including Pulse Start lamps for better effi ciency, lumen maintenance and color.
OSR-1 25” 400w12”Fixture Max. WattBA
22
Model No. Optics Wattage Source Voltage Mounting Finish/Stripe Options
Model Optics Wattage Source Voltage Mounting Finish/Stripe Options
OSR-1
OSR
PS, HPS
PS, HPS
PS, HPS
MH, PS
MH, PS, HPS
MH, PS, HPS
PS
(M), (P), (S)
Bronze (BZ)Black (BK)White (WH)Green (GN)Grey (GY)
Silver Metallic(SL)
Custom (CC)
Photo Receptacle*With Shorting Cap
(PER)
Fusing*Single In-Line Fuse
(SF120) (SF277)*Double In-Line Fuse
(DF208) (DF240)(DF480)
Light Shield(LS)
RPP-1
*See Mounting Section forWallmount options
*Specify voltage
*Specify voltage
(RPP)
Quartz Restrike (QR)
Round Pole Plate Adaptor
Bolt-On Arm 6”(BOA6)
Spider Mount(SM)
*Round Pole PlateAdaptors (RPP) are to be ordered separately.
Bolt-On Arm 10”(BOA10)
*Unless specified a BOA6 will be supplied for S1 & D180 mounting. BOA10 supplied forall other mountingconfigurations.
Photocell & Receptacle
(PC120) (PC208)(PC240) (PC277)
*Specify voltage
(PCR480)
120(1)
208(2)
240(3)
277(4)
480(5)
Multi-Tap ballast factory wired at 277v unlessotherwise specified.
M.Tap(6)
5- Tap(7)
Standard for 400w MH only,factory wired at 480v unless otherwise specified.
Type II(T2)
Type III(T3)
Type IV(T4)
Type V(T5)
t
70 (70)
100 (100)
150 (150)
175 (175)
250 (250)
320 (320)
400 (400)
Color StripeBlue Metallic (94)
Red Opaque (188)
Silver Metallic (58)
Gold Metallic (41)
White Opaque (50)
Black Metallic (60)
Charcoal Metallic (20)
Listed for wet locations
OrbiStar
19645 Rancho Way • Rancho Dominguez, CA • 90220Tel: (310) 512-6480 • Fax: (310) 512-6486
www.visionairelighting.comVISIONAIRE LIGHTINGVISIONAIRE LIGHTING
For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice.
AR
EA
OrbiStar Specifications
EPA
Cast Wall PlateBolt-On-Arm Detail Spider Arm Detail
Fixture with Bracket
CAR-1 2.0 3.6 4.0 5.4 4.6 6.4 2.3Spider Mount
Housing• All housings are two piece, spun aluminum, designed and engineered for a weathertight seal. OrbiStar housings display a decorative exter-nal reveal to give the luminaires a distinct appearance. All external hardware is stainless steel.
Lens and Door Assembly• Door assembly is precision spun one piece .080 gauge corrosion resistant aluminum with captive stainless steel fasteners. • The standard lens is a clear tempered flat glass, secured by galvanized lens retainers and sealed with one piece extruded silicone gasketing to provide complete weather and insect protection.
Optical System• Refl ector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Available in four distribution patterns.• Tool-less refl ector entry.• Field rotatable refl ector (except Type V).
Quali-Guard® Finish• The finish is a Quali-Guard® textured, chemically pretreat-ed through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors.
Mounting• An extruded aluminum, bolt-on-arm (BOA), with continuous channels, securing (2) 1/2 inch zinc running bolts with stainless steel hardware is standard. A Round Pole Plate Adaptor (RPP) is required for mounting to 3” -5” Round Poles.
Electrical Assembly• All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit.• Quick disconnect wiring is standard.• Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K and 600V.
Options• Fixtures available with a variety of options, including photo cell, photo receptacle, light shield, and fusing. Please con-sult factory for custom options.
Listings• OrbiStar is UL listed, suitable for damp and wet locations.• Dark Sky Friendly® certifi ed by the International Dark Sky Association. (Flat Lens models with Type III or Type V Refl ectors)
23
AR
EA
AREA LIGHTINGAREA LIGHTING
Model No. Optics Wattage Source Voltage Mounting Options
Model Optics Wattage Source Voltage Mounting Options
CCS-1
CCS-2ChampionSeries
Type IV(T4)
Bolt-On-Arm(BOA)
Quartz Restrike(QR)
Back Shield(BS)
4 Sided Shield(4SS)
Bird-B-Gone(BBG)
CCS
Slip-Fit-Arm Mount(SFA)
Davit Arm(DA)
Knuckle Mount(KM)
MH, PS
MH, PS (M), (P)
(M), (P)Bronze (BZ)Black (BK)White (WH)Green (GN)Grey (GY)Silver Metallic(SL)Custom (CC)
Finish
Finish
*Round Pole PlateAdaptors (RPP) are to be ordered separately.
Fusing*Single In-Line Fuse
(SF120) (SF277)*Double In-Line Fuse
(DF208) (DF240)(DF480)
*Specify voltage
*Specify voltage
RPP-1
*See Mounting Section forWallmount options
Round Pole Plate Adaptor(RPP)
Photo Receptaclewith shooting cap(PER)
Photocell & Receptacle
(PC120) (PC208)(PC240) (PC277)
*Specify voltage
(PCR480)
120(1)
208(2)
240(3)
277(4)
480(5)
M.Tap(6)
5- Tap(7)
Multi-Tap ballast factory wired at 277v unlessotherwise specified.
Standard for 1000w MH only, factory wired at 480v unless otherwise specified.
Tennis Court Mounting Arms in various styles and configurations are available - See Page 122 for details
t
1000 (1000)
1000 (1000)
Center CourtStandard
Dimensional Drawings
CCS-1A B
27-1/4”1000w1000w
C21-1/4” 9 3/4”
CCS-2 31” 25 1/2” 9”
Max. WattFixture
The Center Court Standard features a unique high performance refl ector system designed for precisely controlled on-court tennis and outdoor sports lighting. Provides superior visibility on the playing surface and strict control of glare for both players and spectators.
The IES Type IV optical system provides optimal asymmetric forward throw distribution and neighborhood-friendly, Dark Sky certifi ed lighting to elimi-nate light trespass. The multi-faceted 95% refl ective aluminum refl ector is computer numerical control (CNC) cut and bent for precise and consistent performance.
Low profi le housing and door assembly are effi ciently CNC manufactured from .080 gauge corrosion resistant aluminum for consistent high quality construction. The clear, tempered fl at glass lens is secured by galvanized lens retainers and weatherproof sealed with form-fi tting silicone gasketing.
The fi nish is a Quali-Guard® textured, electrostatically applied thermoset poly-ester powder coat paint, available in a wide range of architectural colors.
The standard Center Court luminaire mounting arm is a slip-fi t design for easy installation over tenons or poles, and is available in single or multiple fi xture confi gurations. Optional architectural and tennis theme style arms, bolt-on arm, davit arm and knuckle mount are also offered.
24
Listed for wet locations
19645 Rancho Way • Rancho Dominguez, CA • 90220Tel: (310) 512-6480 • Fax: (310) 512-6486
www.visionairelighting.comVISIONAIRE LIGHTINGVISIONAIRE LIGHTING
For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice.
AR
EA
TNS100-D2EPA: 2.6
4FT4FT
EPA Data
Fixture with Bracket
CCS-1CCS-2
2.6 4.7 5.2 7.0 6.0 8.43.0 5.4 6.0 8.1 6.9 9.6
EPA Data
TNS100-S1
EPA: 1.512"
4FT
3º
Bolt-On-Arm Detail Adjustable KnuckleSlip-Fit Mounting Arms
Tennis mounting arms slip-fit over tenons or poles, available in single, double 180º, triple 90º, triple 120º and quad. See page 122 for details.
Center Court SpecificationsHousing• All housings are manufactured using technologically ad-vanced computer numerical control (CNC) machinery. Pre-cision sheared and formed, .080 gauge, corrosion resistant aluminum.• The computerized CNC machinery enables all Center Court Standard housings to be constructed quickly, effi ciently, and ad-hering to exacting ISO 9002 standards. All external hardware is stainless steel.
Lens and Door Assembly• Door assembly is CNC precision sheared and formed from .080 corrosion resistant aluminum.• The lens is a tempered clear safety glass, secured by galvanized lens retainers and sealed with form fi tting silicone gasketing.
Optical System• Refl ector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Type IV refl ector is designed for precisely controlled forward throw distribution for high performance tennis and outdoor sports lighting.• Tool-less refl ector entry.• Field rotatable refl ector.
Quali-Guard® Finish • The finish is a Quali-Guard® textured, chemically pretreat-ed through a multiple stage washer, electrostatically applied, thermoset polyester powder coat finish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit. to promote maximum adherence and finish hardness. All finishes are available in standard and custom colors.
Mounting• Slip-fi t mounting arm is constructed of 1½” x 3” rectangularsteel tubing, 4 foot in length, with 3 degree upward tilt. Available to slip over 2-3/8”, 3”, 3½”, 4” and 4½” dia. tenons or poles. Offered for single, double 180º, triple 90º, triple 120º and quad fi xture mounting confi gurations.
Electrical Assembly• All ballasts are premium grade CWA or HPF regulating auto transformers, available in Metal Halide and Pulse Start. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit.• Quick disconnect wiring is standard.• Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 5K and 600V.
Options• Fixtures available with a variety of options, including photo cell, quartz restrike, back shield, and fusing. Please consult factory for custom options.
Listings• Center Court Standard is UL listed, suitable for damp and wet locations. • Dark Sky Friendly® certifi ed by the International Dark Sky Association.
25
AR
EA
AREA LIGHTINGAREA LIGHTINGDimensional Drawings
SmartFlood
SFL-K
SFL-1
SFR-1 SFM-1
SFRB-1 & 2
SFM-1SFR-1
SFRB-1
SFL-K
9.25” 9.25”14.75”
175w
24” 24” 10” 1000w
15”10” 7”400w
16”16”
13.4” 400w7.75” 7”
7.5” 400wSFRB-2
17” 17” 8” 175w
SFL-1
B C Max. WattsFixture A
26
Model No. Optics Wattage Source Voltage Mounting Options
Model Optics Wattage Source Voltage Mounting Options
SFM-1
SFR-1
SFL-1
SFRB-1
SFRB-2
SFL-K
Knuckle Mount(KM)
TrunnionMount(TM)
SFL
PS, HPS PS, HPS PS, HPS
(M), (P), (S) MH
PS, HPS PS, HPS PS, HPS
(M), (P), (S) MH
PS
(M), (P), (S) MH, HPS
MH, HPS
MH, HPS
(M), (P), (S)
PS
MH
PS
(M), (P), (S) MH, HPS
MH, HPS
(M), (P), (S) MH, PS, HPS
Bronze (BZ)Black (BK)White (WH)Green (GN)Grey (GY)Silver Metallic(SL)Custom (CC)
Finish
Finish
Photo Receptacle*With Shorting Cap
(PER)
Fusing*Single In-Line Fuse
(SF120) (SF277)*Double In-Line Fuse
(DF208) (DF240)(DF480)
*Specify voltage
*Specify voltage
Quartz Restrike (QR)
MH
MH, HPS
Light Shield(LS)
MH
Photocell & Receptacle
(PC120) (PC208)(PC240) (PC277)
*Specify voltage
(PCR480)
120(1)
208(2)
240(3)
277(4)
480(5)
M.Tap(6)
5- Tap(7)
Multi-Tap ballast factory wired at 277v unlessotherwise specified.
Standard for 400 & 1000w MH only, factory wired at 480vunless otherwisespecified.
High PerformanceFlood(HPF)
t
70 (70)100 (100)150 (150)175 (175)
175 (175)250 (250)320 (320)400 (400)
175 (175)250 (250)320 (320)400 (400)
70 (70)100 (100)150 (150)175 (175)
175 (175)250 (250)320 (320)400 (400)
1000 (1000)
Listed for wet locations
The SmartFlood family of luminaires are designed and constructed for superior durability, high perfor-mance, economical operation and aesthetic appear-ance. The rugged housings and choice of adjust-able knuckle mast fi tter or trunnion bracket offer versatility for a wide range of lighting applications.
Models are available for fl oodlighting, accent, security, building façade, landscape and general area lighting.
SmartFlood’s proven performance, excellent light con-trol and wide selection of light sources from 70 through 1000 watts make it the “smart” choice for a variety of lighting tasks.
19645 Rancho Way • Rancho Dominguez, CA • 90220Tel: (310) 512-6480 • Fax: (310) 512-6486
www.visionairelighting.comVISIONAIRE LIGHTINGVISIONAIRE LIGHTING
For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fi xtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifi cations contained herein without prior notice.
AR
EA
Adjustable Trunnion Adjustable Knuckle
Slips Fits over 2 ⅜” - 3” O.D. PipeFor horizontal surface or wall mounting
SmartFlood SpecificationsHousings• SFM-1, SFR-1, and SFL-1 utilize a rugged, one piece die-cast, soft corner aluminum housing with 0.12 inch nominal wall thickness. • SFRB-1 & 2 and SFL-K, are precision formed from corrosion resistant aluminum, utilizing state of the art computer numerical control (CNC) machinery, designed to ensure accuracy and consistency in all fi xture housings, as well as a weathertight seal.• All hardware is rust resistant stainless steel.
Lens and Door Assembly• Die-cast external hinged door frame is fully gasketed. A one piece extruded silicone gasket seals the door frame against the housing.• The Lens is a clear tempered fl at glass, completely en-closed and gasketed for a weathertight seal.
Optical System• Refl ector is precision CNC cut and bent, multi-faceted, segmented, highly effi cient, 95% refl ective aluminum. Quali-Guard® Finish• The fi nish is a Quali-Guard® textured, chemically pretreated through a multiple stage washer, electrostatically applied, thermoset polyester powder coat fi nish, with a minimum of two ml. thickness. Finish is oven baked at a temperature of 400 degrees Fahrenheit to promote maximum adherence and fi nish hardness. All fi nishes are available in standard and custom colors.
Mounting & Aiming• The SmartFlood luminaires are available with either a die-cast aluminum, adjustable knuckle, designed to slip over 2-3/8 inch. pipe, or an adjustable trunnion “U” bracket, with stainless steel hardware. Knuckles and trunnion brack-ets are premounted to fi xtures by Visionaire.
Electrical Assembly• All ballasts are premium grade CWA or HPF regulat-ing auto transformers, available in Metal Halide, Pulse Start, and High Pressure Sodium. Ballast is capable of providing consistent lamp starting down to -20 degrees Fahrenheit.• Socket is glazed porcelain medium or mogul base with nickel plated contacts, rated at 4K (5K for 1000 watt) and 600V.
Options• Fixtures available with a variety of options, including photocell, quartz restrike, light shield, and fusing. Please consult factory for custom options.
Listing• SmartFlood is UL listed, suitable for damp and wet locations.
27
AR
EA
28