ab1000-poe series unmanaged industrial gigabit poe

AB1000-POE SEriES unmAnAgEd induStriAl gigABit POE EthErnEt SwitchES

Zum Hagenbach 7 • D-48366 Laer • Fon: +49 (0)2554/9130-00 • Fax: +49 (0)2554/9130-10 • [email protected]

CA

T-A

B10

00-V

1 E

N e

d. 0

5/16

Wel

ote

c G

mb

H

1

General Data aB1000-POe-21SFP-G03 aB1000-POe-42SFP-G06 aB1000-POe-82SFP-G10

Series AB1000

Type Unmanaged

Ethernet layer Layer-2

Ports (total) 3 6 10

Copper ports 2 4 8

SFP ports 2 2 2

PoE ports 2 4 8

Connector TX RJ45

IEEE 802.3 10BaseT / CSMA/CD (Ethernet)

IEEE 802.3i 10BaseT

IEEE 802.3u 100BaseTX/T4/FX (Fast Ethernet)

IEEE 802.3ab 1000BaseT(X) (Gigabit Ethernet over UTP)

IEEE 802.3z 1000BaseF(X) (Gigabit Ethernet over Fiber)

IEEE 802.3af Power over Ethernet (PoE)

IEEE 802.3at Power over Ethernet Plus (PoE+)

IEEE 802.3x Full Duplex and Flow Control

Unmanaged Industrial Gigabit Switches with PoE. Two, four or eight 10/100/1000BaseTX PoE ports and one or two 10/100/1000 Mbps SFP ports are available depending on model. The Switches support the standards IEEE802.3af and IEEE802.3at for PoE and PoE+. The maximum PoE output power is 15.4 W at IEEE 802.3af and 30 W at IEEE 802.3at. The divices are ideally suited for DIN rail mounting.

CA

T-A

B10

00-V

1 E

N e

d. 0

5/16

Wel

ote

c G

mb

H

2Zum Hagenbach 7 • D-48366 Laer • Fon: +49 (0)2554/9130-00 • Fax: +49 (0)2554/9130-10 • [email protected]

www.welotec.com

Auto MDI-X Yes

Autonegotation Full-, Halfduplex

Speed 10/100/1000 Mbps

Amount MAC adresses 2048 4096

Backplane speed 12 Gbps 20 Gbps

Power supply V DC 12 – 40 V DC / 48 – 57 V DC (PoE)

Power supply connector Terminal block 3-pin

PoE output power 15.4 W (IEEE 802.3af) / 30 W (IEEE 802.3at)

Housing material Metal

Schutzklasse IP40

Dimensions (W x H x D) 43 x 80 x 110 mm 47 x 128 x 105 mm 45 x 165 x 145 mm

Installation DIN rail

Operating temperature range -40 - +75 °C

Storage temperature range -40 - +75 °C

Humidity 5 - 95 % (non condensing)

FCC Title 47, Part 15, Class B

EMC EN 55022, Class B

Safety EN 60950

MTBF time 300.000 hours

10/100/1000BaseTX PoE 2 ports 4 ports 8 ports

10/100/1000 Mbps SFP 1 port 2 ports 2 ports

AB1000-POE SEriESunmAnAgEd induStriAl gigABit POE EthErnEt SwitchES

acceSSOrieS DeScriPtiOn POwer SuPPly

SDR-120-48 DIN rail power supply, -25 - +70 °C, 48 V DC, 120 W

SDR-240-48 DIN rail power supply, -25 - +70 °C, 48 V DC, 240 W

AccESSOriES (OPtiOnAl)

CA

T-A

B10

00-V

1 E

N e

d. 0

5/16

Wel

ote

c G

mb

H


www.welotec.com


A: System LED Indicator / B: RJ45 PoE Ports / C: Gigabit SFP Port

A: System LED Indicator / B: RJ45 PoE Ports / C: Gigabit SFP Ports

CA

T-A

B10

00-V

1 E

N e

d. 0

5/16

Wel

ote

c G

mb

H


www.welotec.com


A: System LED Indicator / B: RJ45 PoE Ports / C: Gigabit SFP Ports

CA

T-A

B10

00-V

1 E

N e

d. 0

5/16

Wel

ote

c G

mb

H


www.welotec.com

PlEASE nOtE BEfOrE inStAllAtiOn

Please confirm the following things before installation:1. If the PoE port meets the power requirement of the connecting devices.2. If the PoE standard requirement and power supply matches with the power receiving device.

(1/2+ 3/6- (End-span) / 4/5+ 7/8- (Mid-span))3. If the output power of the matched power adapter is compatible with the specification in the label of the PoE switch.

Please install the PoE switch according to the following steps:1. Put the PoE switch on the surface of a large and stable table, or professional industrial installation rank mount. 2. Connect Positive, Minus and Earth terminals as indicators on the power adapter.3. Connect the network devices to the PoE switch port though network cable.

Note:1. Please do not put heavy products on the PoE switch, and please ensure good ventilation environment for the oE switch. 2. Please cut off the power first before plugging the power adapter.

Power:Connect the power cable, plug it into power socket, turn on the power, then the switch will automatically initialize, and LED lights status will display as following:1. Except the POE port lights, all the other lights will go through the process of “on-off-on-off”, which means the system

restoration is successful. 2. Power LED remains lit.

Note:If initialization is inconsistent with the above, please check the power.

leD inDicatOr StatuS DeScriPtiOn

PWR / SYSLED green ON Normal

LED green OFF Power OFF

PoE

LED green ON Connected to Powered Device (PD), PoE working properly

LED green Blink Short circuit or current overload

LED green OFF No connected Powered Device (PD) or PoE power OFF

LINK

LED yellow ON Link is OK

LED yellow Blink Link is OK and data is being sent and received

LED yellow OFF Link failure and no data transmission

L/A (SFP)

LED green ON Link is OK

LED green Blink Link is OK and data is being sent and received

LED green OFF Link failure and no data transmission

Note: Please confirm that the all PoE ports of PD devices are complying with IEEE802.3af/at standard.

Power Industrial Terminals: 48 V DC (46 - 57 V DC), More than 50VDC is recommended when used PoE+ output, 110 - 240 V AC, 50/60 Hz power supply

PoE-Port: The PoE ports support PoE function, which can transmit data and power simultaneously if connected matching device. The LED lights on the front panel can show working status of each port.

Ethernet-Ports: Besides PoE ports, other ports are normal self-sensing Ethernet RJ45 ports which support Auto MDI/MDIX, plug and play. The LED lights on the front panel can show working status of each port.

ab1000-poe series unmanaged industrial gigabit poe

Documents