abb modelm26 manifold line datasheet - manuallib · abb modelm26 manifold line datasheet ... 2600t...

ABB ModelM26 Manifold line datasheet http://www.manuallib.com/abb/modelm26-manifold-line-datasheet.html

PTFE is considered inert towards nearly all known chemical elements and it is insoluble in allsolvents. It is only attached by elemental alkali metals, and by Chlorine Trifluoride and elementalFluorine at high temperatures and pressures. Fluorinated hydrocarbons can have a swellingeffect on PTFE but it is a reversible situation, while some fluorinated oils, around 300°C ( 5 72°F) temperature, swell anddissolve PTFE. PTFE is completely untouched by light and atmospheric agents. Its resistance tonuclear radiations is rather low, it is affected by it starting from 105 rad. with a lowering of thetensile properties.

ManualLib.com collects and classifies the global productinstrunction manuals to help users access anytime andanywhere, helping users make better use of products.

http://www.manuallib.com

Model M26Manifold line for 266 pressure transmitters

Data Sheet DS/M26-EN Rev. D

Comprehensive wetted material portfolio

Accessories availableBolts and brackets allow multiple installations and grant full transmitter support.

Tee bars easily manoeuvrable

2600T Series Pressure TransmittersEngineered solutions for allapplications

Tailored manifold to meet user’s needs

Perfect interface between process and transmitter thanks to the most common connection types.

Colour coded functional identification

This Manual:http://www.manuallib.com/abb/modelm26-manifold-line-datasheet.html

http://www.manuallib.com/abb/modelm26-manifold-line-datasheet.html

2 DS/M26-EN Rev. D | 2600T Series Pressure transmitters Manifold line M26


Functional SpecificationsManifold pressure rating vs. process temperature:Standard PTFE packing and gaskets

PTFE propertiesMechanical propertiesPTFE has good tensile properties different from other plastic materials as it may be used over a wide temperature range from – 250°C to +250°C ( -418°F to +482°F ) . PTFE shows the lowest friction values compared to other plastic materials. Furthermore, being the static friction values almost equal to the dynamic friction values, there is no tendency to seizure within a sliding system situation, and therefore no detachment friction.

Electrical propertiesPTFE has very good electrical properties. Dielectric strength is excellent and remains unchanged even at high temperature, it only decreases depending on the material thickness and on the electrical frequency values. Dielectric constant values and dissipation factor are among the lowest values and remain unchanged even at high temperatures and at a wide frequency range. Good resistance to arc and corona effect.

Other propertiesPTFE surfaces are highly anti adhesive and do not absorb moisture. PTFE is non-toxic and can be used in contact with food. There are some limitations only for some kinds of filled PTFE due to the toxicity of some filling elements ( i.e. heavy metals and its compounds ) .

External agents resistancePTFE is considered inert towards nearly all known chemical elements and it is insoluble in all solvents. It is only attached by elemental alkali metals, and by Chlorine Trifluoride and elemental Fluorine at high temperatures and pressures. Fluorinated hydrocarbons can have a swelling effect on PTFE but it is a reversible situation, while some fluorinated oils, around 300°C ( 5 72°F ) temperature, swell anddissolve PTFE. PTFE is completely untouched by light and atmospheric agents. Its resistance to nuclear radiations is rather low, it is affected by it starting from 105 rad. with a lowering of the tensile properties.

Manifold pressure rating vs. process temperature:optional Graphoil packing and gaskets

Graphoil propertiesMechanical propertiesGraphoil may be used over a wide temperature range from – 250°C to +600°C ( -400°F to +1112°F ) . It features high resistance to corrosion, heat and fire. Graphoil is generally used in high temperature processes where thermal and/or mechanical shocks can occur. It provides an excellent seal even with low torques or irregular flange surfaces.

Other propertiesGraphoil is a packing and gasket material made exclusively from natural graphite flake. Its high degree of chemical compatibility makes Graphoil inert to most chemicals and gases with the exception of strong oxidizing agents.



2600T Series Pressure transmitters Manifold line M26 | DS/M26-EN Rev. D 3

ImportantPlease ask for a supplementary check if your application is close to the limits shown in the above picture (230°C and/or 6000 psi).

Important The maximum working temperature of the whole assembly (manifold and instrument) corresponds to the temperature limit of the pressure transmitter.

Important When the manifold is assembled to a 2600T pressure trans-mitter with NACE compliance A4-50 Stainless Steel bolts (available on request), please note that the maximum working pressure is limited to 210 bar (3045 psi).

Standard supplied partsM26 manifolds are always supplied with:- PTFE gaskets for transmitter connection (for flanged models)- 1 or 2 Plugs 1/4“ NPT-M (according to the selected model)- Carbon Steel bolts- Certificate of compliance with the order EN10204-2.1- Inspection certificate EN 10204-3.1 of manifold body only.

(*) The mounting bracket kit contains:bracket, U-bolts, cap screws, nuts, lock washers, spacers and assembling instruction.

Physical Specification

(Refer to ordering information sheets for options related to specific model or versions code)MaterialsBody, bonnet and nutAISI 316 L ss; Hastelloy C-276™; Monel 400™; Inconel 625Mounting bracket (*)Zinc plated carbon steel; AISI 316 L ss.Gaskets PTFE, other available on request.BoltsZinc plated carbon steel; AISI 316 ss bolts and nuts Class A4–50 per UNI 7323 (ISO 3506), in compliance with NACE MR0175 Class II (as option).

Made in Italy





Two-valve manifold configurations(Refer to ordering information sheets for options related to specific model or versions code)

M26.P.A.S.2.V. - Two-valve bar stock manifold. Threaded connections

Inlet (process connection) 1/2 in. - 14 NPT male

Outlet (transmitter side) 1/2 in. - 14 NPT female

Drain 1/4 in. - 18 NPT female

Packing PTFE

Rating 690 bar (69 MPa, 10000 psi)

Included accessory 1 plug 1/4 in. - 18 NPT male


Inlet (process connection) 1/2 in. - 14 NPT female

Outlet (transmitter side) 1/2 in. - 14 NPT male


Packing PTFE




Inlet (process connection) 1/2 in. - 14 NPT male

Outlet (transmitter side) 1/2 in. - 14 NPT male


Packing PTFE



Note:

For details about the correct codification of each single model of manifold,

please refer to the ordering information at the end of this document.






Outlet (transmitter side) 1/2 in. - 14 NPT female


Packing PTFE



M26.D.A.S.2.V. - Two-valve bar stock manifold for DP Style transmitters

Body configuration For standard flanges transmitters


Outlet (transmitter side) Flanged according IEC61518/B


Packing PTFE

Rating 413.3 bar (41.37 MPa, 6000 psi)

Included accessories

1 plug 1/4 in. - 18 NPT male

1 PTFE gasket for transmitter flanged

side (IEC61518/B)

2 Carbon steel screws 7/16 in. UNF

(length 2 in.)

M26.D.A.V.2.V. - Two-valve bar stock manifold for DP Style transmitters

Body configuration For vertical flanges transmitters




Packing PTFE





side (IEC61518/B)


(length 1 3/4 in.)

Note:







Three-valve manifold configurations(Refer to ordering information sheets for options related to specific model or versions code)

M26.D.A.S.3.V. - Three-valve bar stock manifold for DP transmitters





Packing PTFE





side (IEC61518/B)


(length 2 in.)

M26.D.A.V.3.V. - Three-valve bar stock manifold for DP transmitters





Packing PTFE





side (IEC61518/B)


(length 1 3/4 in.)

Note:






Five-valve manifold configurations(Refer to ordering information sheets for options related to specific model or versions code)

M26.D.A.S.5.V. - Five-valve bar stock manifold for DP transmitters





Packing PTFE





side (IEC61518/B)


(length 2 in.)

M26.D.A.V.5.V. - Five-valve bar stock manifold for DP transmitters





Packing PTFE





side (IEC61518/B)


(length 1 3/4 in.)

Note:







M26.P.A.S.2.V. Two-valve manifold with threaded connection (1/2 in. - 14 NPT male inlet and 1/2 in. - 14 NPT female outlet); pressure rating 690 bar (69 MPa, 10000 psi)

M26.P.A.S.2.V. Two-valve manifold with threaded connection (1/2 in. - 14 NPT female inlet and 1/2 in. - 14 NPT male outlet); pressure rating 690 bar (69 MPa, 10000 psi)

22 (0.87)

148 (5.83)

VE

NT.

ISO

LATE

FULLY OPEN

57 (2

.24)

30 (1

.18)

1/4" NPT-F DRAIN

30 (1.18)

IN

120

(4.7

2)

OU

T

30 (1.18)

56 (2

.20)

30 (1

.18)

22 (0.87)

Ø5,5 (0.21)

148 (5.83)

VE

NT.

ISO

LATE

FULLY OPEN

120

(4.7

2)

OU

TIN

1/4" NPT-F DRAIN

MOUNTING DIMENSIONS (not for construction unless certified) – dimensions in mm




M26.P.A.S.2.V. Two-valve manifold with threaded connection (1/2 in. - 14 NPT male inlet and outlet); pressure rating 690 bar (69 MPa, 10000 psi)

Ø5,5 (0.22)

120 (4.73)

34 (1.34)30 (1.18)

143 (5.63)

22 (0.87)

FULLY OPEN

1/4" NPT-F DRAIN

ISOLATE

VENT

30 (1.18)

OU

TIN





M26.P.A.S.2.V. Two-valve manifold with threaded connection (1/2 in. - 14 NPT female inlet and female outlet); pressure rating 690 bar (69 MPa, 10000 psi)

VE

NT.

50 (1.97)

1/4" NPT-F DRAININ

OU

T

60 (2

.36)

168 (6.61)

30 (1

.18)

VE

NT.

ISO

LATE

ISO

LATE

FULLY OPEN

N°2 FIXING HOLES Ø7 (0.27)




M26.D.A.V.2.V. Two-valve manifold for vertical flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).

2x Ø12 (0.47)

1/4" NPT-F DRAIN

INLET SIDE1/2" NPT-F

INSTRUMENT SIDE(IEC 61518/B)

ISOLATE

VENT

32 (1.30)

108,

2 (4

.26)

20 (0.79)

75 (2.95)

131,4 (5.17)FULLY OPEN

FULL

Y O

PE

N

10 (0

.39)

42,5 (1.77)





M26.D.A.S.2.V. Two-valve manifold for standard flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).

60 (2

.36) 89

(3.5

0)

40 (1.57)

71,4 (2.81)

41,3

(1.6

3)

18 (0.71)

75 (2.95)

131,4 (5.17)

35 (1.38)

11 (0

.43)

16 (0

.63)

61 (2.40)

M10 x 1.5

1/4" NPT-F DRAIN

2X Ø12 (0.47)


FULLY OPENFULLY OPEN

INLET SIDE1/2" NPT-F

VENT

ISOLATE

FULL

Y O

PE

N




M26.D.A.S.3.V. Three-valve manifold for standard flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).

105 (4.13)

217,8 (8.57)

54 (2.13)

41,3

(1.6

3)

4x Ø

12 (0

.47)

72,9 (2.87)

40 (1.57)

60 (2

.36)

88,1

(3.4

7)


INLET SIDE2x 1/2" NPT-F

FULL

Y O

PE

N

FULLY OPEN

20 (0

.79)

30 (1.18)84 (3.30)

16 (0

.63)

EQUALISE

ISOLATEISOLATE

2x 1/4" NPT-F DRAIN2x M10x1.5





M26.D.A.V.3.V. Three-valve manifold for vertical flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).

80 (3.15)

16 (0

.63)

41,3

(1.6

3)

54 (2.13)

150 (5.90)

258 (9.96)

Ø12

(0.4

7)

85 (3.35)

10 (0

.39)

2x 1/4" NPT-F DRAIN

ISOLATEISOLATE

EQUALISE

2x M10x1.5

70 (2

.75)

32 (1.26)

126,

3 (4

.97)

FULL

Y O

PE

N


INLET SIDE

2x 1/2" NPT-F




M26.D.A.S.5.V. Five-valve manifold for standard flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).

Ø12

(0.4

7)

54 (2.13)

155 (6.10)

267,8 (10.54)

41,3

(1.6

3)

40 (1.57)

71,4 (2.81)

109

(4.2

9)

60 (2

.36)

30 (1.18)

115 (4.53)

30 (1

.18)

24 (0

.94)

INLET SIDE

2x 1/2" NPT-F

INSTRUMENT SIDE

(IEC 61518/B)

EQUALISE

ISOLATEISOLATE

2x 1/4" NPT-F DRAIN

2x M10 FIXING HOLES

VENTVENT





M26.D.A.V.5.V. Five-valve manifold for vertical flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).

41,3

(1.6

3)

54 (2.13)

150 (5.90)

262,8 (10.35)

80 (3.15)

16 (0

.63)

70 (2

.75)12

6,3

(4.9

8)

32 (1.26)INSTRUMENT SIDE

(IEC 61518/B)

INLET SIDE

2x 1/2" NPT-F

VENT

ISOLATE

EQUALISE

ISOLATE

VENT

FULL

Y O

PE

N

85 (3.35) 2x 1/4" NPT-F DRAIN

FULLY OPEN

2x M10x1.5




Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V. (1/2 in. - 14 NPT male inlet and 1/2 in. - 14 NPT female outlet threaded connection).

Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V. (1/2 in. - 14 NPT female inlet and 1/2 in. - 14 NPT male outlet threaded connection).

116 (4.57)

72 (2.83)

62 (2

.44)28

2 (1

1.08

)

224

(8.8

2)

105 (4.12)

18 (0.71)Space for

cover removal

58 (2.28)

9 (0.35)91 (3.58)

162

(6.3

7)

143 (5.63)36

(1.4

2)

49 (1.93)

1/2" - 14 NPT

162

(6.3

5)

18 (0.71)Space forcover removal

78 (3.04)55 (2.16)

116 (4.57)

72 (2.83)

62 (2

.44)28

2 (1

1.08

)

224

(8.8

2)

105 (4.12)

18 (0.71)Space for

cover removal

58 (2.28)

9 (0.35)91 (3.58)

148 (5.83)

36 (1

.42)

49 (1.93)

179

(7.0

2)

1/2" - 14 NPT

142

(5.5

7)

Space forcover removal

18 (0.71)78 (3.04)55 (2.16)





Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V. (1/2 in. - 14 NPT male inlet and outlet threaded connection).

Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V. (1/2 in. - 14 NPT female inlet and outlet threaded connection).

116 (4.57)

72 (2.83)

62 (2

.44)28

2 (1

1.08

)

224

(8.8

2)

105 (4.12)

18 (0.71)Space for

cover removal

58 (2.28)

9 (0.35)91 (3.58)

162

(6.3

7)

143 (5.63)36

(1.4

2)

1/2" - 14 NPT

162

(6.3

5)

Space forcover removal

18 (0.71)78 (3.04)55 (2.16)

116 (4.57)

72 (2.83)

62 (2

.44)

282

(11.

08)

102

(3.9

9)

105 (4.12)

18 (0.71)Space for

cover removal

58 (2.28)

9 (0.35)91 (3.58)

162

(6.3

7)

168 (6.61)

36 (1

.42)

1/2" - 14 NPT


78 (3.04)55 (2.16)




Pressure transmitter DP-Style (266PSH, 266VSH, 266RSx) on manifold bracket with M26.D.A.S.2.V. (1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)

Pressure transmitter DP-Style (266PSH, 266VSH, 266RSx) with vertical flanges on manifold bracket with M26.D.A.V.2.V. (1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)

18 (0.71)91 (3.58) Space for

cover removal

158

(6.2

3)17

9 (7

.02)

58 (2.28)

9 (0.35)

88 (3.45)20

8 (8

.19)


78 (3.04)55 (2.16)

88 (3.43)

104 (4.06)

71 (2.77)

18 (0.71)91 (3.58) Space for

cover removal

92

(3.6

3)

24

3 (9

.57

)

50 (1.97)

48

(1.8

9)

58 (2.28)

9 (0.35)

118 (4.63)


78 (3.04)55 (2.16)

144 (5.68)

217 (8.55)





Differential pressure transmitter (266DSH, 266MSH) on manifold bracket with M26.D.A.S.3.V. (1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)

18 (0.71)91 (3.58) Space for

cover removal

158

(6.2

3)17

9 (7

.02)

54 (2.13)

58 (2.28)

9 (0.35)

217.8 (8.57)20

8 (8

.19)


78 (3.04)55 (2.16)

88 (3.43)

11 (0

.43)

142 (5.59) 104 (4.06)

71 (2.77)

Differential pressure transmitter (266DSH, 266MSH) on manifold bracket with M26.D.A.V.3.V. (1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)

18 (0.71) 18 (0.71)91 (3.58) Space for

cover removal

92 (3

.63)

229

(9.0

1)

258 (9.96)

62 (2

.45)

78 (3.04)58 (2.28)

9 (0.35) Space forcover removal

55 (2.16)

144 (5.68)236 (9.28)




Differential pressure transmitter (266DSH, 266MSH) on manifold bracket with M26.D.A.S.5.V. (1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)

Differential pressure transmitter (266DSH, 266MSH) on manifold bracket with M26.D.A.V.5.V. (1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)

18 (0.71)91 (3.58) Space for

cover removal

158

(6.2

3)17

9 (7

.02)

54 (2.13)

58 (2.28)

9 (0.35)

267.8 (10.54)

208

(8.1

9)


78 (3.04)55 (2.16)

88 (3.43)

11 (0

.43)

104 (4.06)

71 (2.77)

18 (0.71) 18 (0.71)91 (3.58) Space for

cover removalSpace forcover removal

92 (3

.63)

229

(9.0

1)

262.8 (10.35)

62 (2

.45)

78 (3.04)55 (2.16)

58 (2.28)

9 (0.35)

144 (5.68)

236 (9.28)





Ordering information

BASIC ORDERING INFORMATION model M26 manifold Select one character or set of characters from each category and specify complete catalogue number.Refer to additional ordering information and specify one or more codes for each transmitter if additional options are required.BASE MODEL - 1st to 3rd characters M 2 6 X X X X X X X X X X

Manifold model for 266 Pressure Transmitters

Design - 4th character

Manifold for DP Style transmitters D

Manifold for P Style transmitters P

Revision - 5th character

Revision A A

Body configuration - 6th character

Standard construction S

For vertical-flange transmitter (Note 1) V

Valves - 7th character

Two-valve manifold 2

Three-valve manifold (Note 1) 3

Five-valve manifold (Note 1) 5

Valve Type - 8th character

Standard V

Material (wetted parts) - 9th character

AISI 316L ss NACE S

Hastelloy C276 NACE H

Monel 400 M

Inconel 625 N

Packing material - 10th character

PTFE P

Graphoil G

Gasket material (wetted parts) - 11th character

None (Note 2) N

PTFE (Notes 1, 6) P

Graphoil (Notes 1, 7) G

Manifold process connection (INLET)- 12th character

Threaded 1/2 in. - 14 NPT-female F

Threaded 1/2 in. - 14 NPT-male (Note 2) M

Manifold transmitter connection (OUTLET)- 13th character

Flanged outlet according to IEC61518/B (Note 1) 1

Threaded 1/2 in. - 14 NPT-female (Note 2) F

Threaded 1/2 in. - 14 NPT-male (Note 2) M




M26 X X X X X X X X X X X X X X X X X

Rating - 14th character

413.7 bar (41.37 MPa, 6000 psi) (Note 1) 6

690 bar (69 MPa, 10000 psi) (Note 2) 1

Transmitter fixing bolts - 15th characters

None (Note 2) N

Carbon Steel (Note 1) C

Stainless Steel NACE compliant (Note 1) S

Bracket kit - 16th character

None N

Carbon Steel bracket kit for pipe mounting (Notes 1, 3) C

Stainless Steel bracket kit for pipe mounting (Notes 1, 4) S

Material traceability - 17th character

Inspection certificate EN 10204–3.1 of manifold body only (Note 5) 1

Inspection certificate EN 10204–3.1 of process wetted parts 2

Note 1: Not available with design code PNote 2: Not available with design code DNote 3: Not available with bolts code SNote 4: Not available with bolts code C Note 5: Not available with material (wetted parts) codes H, M, snd NNote 6: Not available with packing material code GNote 7: Not available with packing material code P

Manifold made in Italy by SAMI Instruments Srl

Standard delivery items (can be differently specified by ordering code)– PTFE gaskets for transmitter connection (for flanged models)– 1 or 2 Plugs 1/4“ NPT-M (according to the selected manifold model)– Carbon Steel bolts– Certificate of compliance with the order EN10204-2.1– Inspection certificate EN 10204-3.1 of manifold body only.

NACE CONFORMITY IS ACCORDING TO Recommendations PER MR0175 2003 / ISO 15156-3 FOR AISI 316L, HASTELLOY C-276, INCONEL 625 AND MONEL 400

M26 manifolds are in compliance with ASME B31.1 - Power Piping.

Hastelloy C-276TM is a Cabot Corporation trademarkMonel 400TM is an International Nickel Co. trademark



DS

/M26

-EN

Rev

. D

02.

2014

Contact us

NoteWe reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreedparticulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.

We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents - in whole or in parts – is forbidden without prior written consent of ABB.

Copyright© 2013 ABBAll rights reserved

3KXP7200007R1001

ABB Ltd.Process AutomationHoward Road, St. NeotsCambridgeshire, PE19 8EUUKTel: +44 (0)1480 475321Fax: +44 (0)1480 217948

ABB Inc.Process Automation125 E. County Line RoadWarminster, PA 18974USA Tel: +1 215 674 6000Fax: +1 215 674 7183

ABB Automation Products GmbHProcess AutomationSchillerstr. 7232425 MindenGermany Tel: +49 551 905-534Fax: +49 551 905-555

ABB S.p.A.Process AutomationVia Statale 11322016 Lenno (CO),ItalyTel: +39 0344 58111Fax: +39 0344 56278

www.abb.com

Sales

Service



abb modelm26 manifold line datasheet - manuallib · abb modelm26 manifold line datasheet ... 2600t...

Documents