A solution for every needABB portfolio for MV Outdoor and Underground Networks

Complete portfolio offering in all ranges Outdoor MV Instrument Transformers

Your way to communicate your outdoor products efficiently

Substations: CT type TPO, single pole VT type TJO and double pole VT type TDO.

Pole mounted: CT type KON, single pole VT type VOG and double pole VT type VOL.

Special CTs: KOKU G dedicated to LBS SECTOS, KOHU dedicated to LBS NPS 24, IMT dedicated to LV bushings of distribution transformers (for balance measurement).

KON-24 FR v02: The KON-24 outdoor current transformer is used for metering and relaying on outdoor 24 kV circuits. KON 24 I2Cv02: The KON-24 I2C outdoor current transformers are used for metering and relaying on circuits up to 24 kV. It isdesigned as single-or-mul tiple turn transformers, with one transformer ratio and, if necessary, with the possibility to change over on the primary or secondary side. VOG-FR v01: The VOG-24 are outdoor single-pole voltage transformers. It is made of resin insulation and is designed for networks up to 24 kV. VOL-24 FR v01: The VOL-24 outdoor double-pole insulated voltage transformer is used for metering line-to-line circuits. It is made of resin insulation and is designed for networks up to 24 kV.

Distributionprotection relays& control solutions

Wireless communicationdevices

A flexible substation automation device that provides localized automation tasks, The COM600 gathers data from protection and control devices, such as relays and meters, combining different communication protocols into one common contact point. This unit enables local HMI, data concentrator, and advanced smart grid automation such as FDIR and VVO automation.

The Wireless Gateway RER603 provides wireless monitoring and control of field devices via GPRS from a central site or network control centre (SCADA). The device offers industrial quality connectivity for the IEC 60870 protocol family and can be connected by using IEC 60870-5-104 protocol from the SCADA and controlled through 2 serial application ports.

The Wireless Controller REC603 is a compact, solution based device for the remote control and monitoring of secondary substations such as network disconnectors, load break switches and Ring Main Units (RMUs) in distribution networks. REC603 enables the network control system (SCADA) to wirelessly monitor and control the field devices over the public communication infrastructure (GPRS).

Rugged, easy to install devices used to build field area communication networks for smart grid applications.

Product Offering Benefits

ABB has in its offer ITs dedicated to different applications for voltage levels up to 40.5 kV:

COM600 grid automation controller

RER603

REC603

Tropos

The family of outdoor instrument transformers are cast in hydrophobic cycloaliphatic epoxy resin (HCEP), capable of withstanding outdoor environmental conditions. The HCEP material offers superior arc track, ozone, and ultraviolet-resistive properties while maintaining physical strength. The hydrophobic surface properties of HCEP ensure highly reliable performance in wet or humid environments.

Outdoor Application ProductsPower Products Medium Voltage

Padmount

Single-Phase Disconnectors

R-MAG®

magneticallyactuated outdoorbreaker

OVB-VBF; OVB-SDB; OHB.

OVR recloser (single and three phase), up to 38 kV, 1200 A, 16 kA

GridShield® up to 38 kV, 1200 A, 16 kA

OVR-15 recloser

ReliaPad® padmountedcircuit breaker

DCD double insulatorsingle-phase

Designed with a magnetic actuator mechanism, the R-MAG breaker reduces costly maintenance intervals, increases reliability, and improves safety. This field-proven design is offered in ratings of 15-38 kV 200 kv BIL and 40 kA.

Vacuum Circuit Breakers OVB-VBF are used in distribution systems rated at 24 / 36 / 40.5 kV and are of live tank design.

Provided with the PCD control, the OVR recloser provides single-phase tripping, reduced maintenance, and increased safety with all electronics located in the low voltage control cabinet. The OVR is available with single- and three-phase tripping recloser units.

ABB’s newest generation recloser with the advanced RER620 control and integrated web browser for easy programming, the GridShield provides smart grid technologies such as DNP and IEC 61850 with GOOSE messaging. The GridShield is available with single- and three-phase tripping, integrated loop control.

ABB’s continuous efforts to provide the most advanced feeder automation equipment to the industry has led to the expansion of the OVR platform. OVR-15®,is a three-phase automatic recloser paired and fully type tested with RER615, an advanced and comprehensive yet simple relay from ABB’s Relion® family. OVR-15 provides reliable performance and advanced features to protect outdoor networks and substations.

Dead-front padmount circuit breaker consists of a three-phase breaker, load-break switches, control cabinet and a VT for control power. The ReliaPad is offered with the PCD or RER620 control for single- or three-phase tripping, remote communication, and multiple smart grid applications.

Hookstick operated switch used for sectionalizing or isolating equipment on electrical distribution systems up to 38 kV.

Product Offering Benefits

Automatic Electronic Sectionalizer

AutoLink sectionalizer

With only one style needed per voltage class (15, 27 and 38kV), you’ll save time, effort, and money. The ABB AutoLink fits on a standard ICX cutout body and is field configurable and field resettable. Available for three-phase and load break.

Outdoor Dead Tank Vacuum Circuit Breakers

Outdoor Live Tank Circuit Breakers

Pole Mounted Circuit Breaker

Reclosers

Sectos Sectos is an SF6-insulated, outdoor pole mounted load break switch family for overhead lines and specifically designed for use in modern remote controlled distribution automation systems, working as sectionalizer.

SF6 Load Breaking Switches

NPS ABB brings reliability of operation in all climatic conditions and installations in various arrangements. In addition, the NPS switch is either manually controlled or remotely with the possibility of working in the automation network as a sectionalizer.

Three-Phase Air Insulated Switches

Types ICX, LBU, NCX, EU & vertical contact

Distribution cutouts, used on overhead distribution systems to provide overcurrent protection, give visible indication of fuse operation and sectionalizing break points for maintenance personnel.

Fuse Cutouts

The PVB is a 12kV, three-phase, live tank, outdoor pole mounted vacuum circuit breaker with solid dielectric insulator designed for pole-mounted or substation applications. The insulating material of PVB is Hydrophobic Cycloaliphatic Epoxy (HCEP), the next generation of Cycloaliphatic Epoxy (CEP).

PVB

ABB, Complete Solution Provider.Products and equipment for Medium Voltage distribution networks for outdoor installations, creating A Brighter Outdoor and optimized grids.ABB, leader in automation and power distribution, offers a full feeder automation solution comprising of primary equipment for distribution systems, complete family of relays for transmission and distribution usage, communication enabling devices and substations gateway with automatic full insulation and reinstallation. This comprehensive portfolio allows much higher value to the customer as a package solution can be offered or single-point solutions enabling smart grids applications.

Single-phase disconnectors

Fusecutouts

Three-phase air insulated switches

Automatic electronic sectionalizer

SF6 load breaking switches

Pole mounted circuit breaker

Commercial

Residential

Industry

Distribution

SecondarysubstationMV/MV

Primarysubstation

HV/MV

Up to 40.5 kV

Outdoor dead tank vacuum circuit breakers

PadmountOutdoor live tank circuit breakers

Reclosers

Automatic Electronic Sectionalizer

Smart solutions for A Brighter OutdoorABB portfolio for MV Outdoor networks

Padmount Single-Phase Disconnectors

Model

Applicable Standard

Maximum Rated Voltage

Maximum Rated Current

Maximum Icc

Installation

Technology

Model

Applicable Standard

Application

Communication

Main features

IED & Control Cabinets

Main features

Main Function Circuit Breakers Reclosers Load Break Switches/Sectionalizers Fuse Cutouts & Disconnectors

R-MAG

ANSI

38kV

3700 A

40kA

Substations

Vacuum

Magnetic Actuator

Automation-Ready

High Reliability

EmbeddedPoles

RER620/RER615

IEC61850, DNP 3.0, IEC 60870-5-101/104, Modbus

WebHMI, Single-Phase Tripping Functionality and High Impedance Fault protection function

Reclosers

ANSI/IEEE/IEC/GB

Wireless controller for remote control and monitoring through GPRS

Local IEC60870-5-101

REC601/603

Remote control and monitoring, protection, fault indication, power quality analysis and automation for disconnectors & switches; HMI Display

IEC 60870-5-101/104, DNP3 level 2 and Modbus, IEC 61850

REC615

ReliaPad

ANSI/IEEE

27kV

800 A

12.5kA

Padmount

Vacuum

HCEP bushings

Dead-Front

Sectionalizer function available

Air-Insulated switches

Sectos

IEC/GB/IEEE

36kV

630 A

20kA

Pole Mount

SF6

Flexible mounting arrangements

Two or three-ways, earth switch available

Sealed tank for zero maintenance

Upgradeable to fully automated

NPS

IEC/GB

36kV

630 A

20k

AutoLink

ANSI/IEEE

38kV

200 A

4kA

Air

HCEP bushings

Mounting versatility

Modular configurations

Upgradeable to fully automated

-

Field Configurable

Resettable

Fits in cutout body

1 or 3-phase, Wireless, load break versions

DCD/SID

900 A

40kA

-

Double or single-insulator

Flexible mounting

RBD

Air

ICX

200 A

20kA

Fuse

Interchangeable

Single-venting

expulsion

ANSI/IEEE/IEC/GB

38kV

Porcelain, Silicon or Polymer concrete insulators

NCX

Fuse

Non-

interchangeable

Double-venting

expulsion

EUH

Fuse

Load Break

Combination

with arresters

ready

PVB

IEC/GB

12kV

630 A

20kA

Pole Mount

Vacuum

HCEP bushings

Low maintenance

OVB-SDB

IEC

15kV

2000 A

25kA

Substations

Vacuum

Porcelain bushings

Telescopic Arrangement

Spring mechanism

Capacitor switching duty available

OVB-VBF

IEC/GB/GOST

40.5kV

2500 A

31.5kA

Substations

Vacuum

OHB

IEC/GB

40.5kV

2500 A

31.5kA

Substations

SF6

GridShield

ANSI/IEEE/IEC/GB

38kV

1250 A

16kA

IEC61850 native & all protocols available

IEC 61850 with GOOSE messaging, DNP3, Modbus, IEC 60870-5-101/104 protocol.

Easily upgradeable from manual to motor and fully automated

Contacts in Vacuum environment to avoid oxidation and contamination

High quality, 3 mm stainless steel tank

ABB globally recognized vacuum interrupter

Spring mechanism, easily upgradable from manual to motor and fully automated

DNP3.0, IEC101-104, ModBus

Pole Mount / Substation

Vacuum

HCEP bushings

Single-Phase tripping available

Pole Mount

12.5 kA

Single-Phase Three-

Phase

Stainless Steel enclosure

Stainless Steel

Embedded Poles

Flexible mounting options

27kV 15.5kV

630 A 800 A

OVR-3 OVR-3SP OVR-1+ OVR-15

DNP 3.0, IEC60870-5-101/103, Modbus

Single-Phase Tripping Functionality, HMI, Modularity

PCD

Outdoor Dead Tank Vacuum Circuit Breakers

Outdoor LiveTank Circuit Breakers

Pole Mounted Circuit Breaker

Reclosers SF6 Load Breaking Switches

Three-Phase Air Insulated Switches

Fuse Cutouts

Main overcurrent and earth-fault protection for overhead lines and cable feeders, in either isolated neutral, resistance-earthed, compensated or effectively-earthed distribution networks, depending on the standard configuration.

IEC 61850 ; IEC 60617; IEC-ANSI

Feeders

REF615

ABB, Complete Solution Provider.Products and equipment for Medium Voltage distribution networks for outdoor installations, creating A Brighter Outdoor and optimized grids.ABB, leader in automation and power distribution, offers a full feeder automation solution comprising of primary equipment for distribution systems, complete family of relays for transmission and distribution usage, communication enabling devices and substations gateway with automatic full insulation and reinstallation. This comprehensive portfolio allows much higher value to the customer as a package solution can be offered or single-point solutions enabling smart grids applications.

Single-phase disconnectors

Fusecutouts

Three-phase air insulated switches

Automatic electronic sectionalizer

SF6 load breaking switches

Pole mounted circuit breaker

Commercial

Residential

Industry

Distribution

SecondarysubstationMV/MV

Primarysubstation

HV/MV

Up to 40.5 kV

Outdoor dead tank vacuum circuit breakers

PadmountOutdoor live tank circuit breakers

Reclosers

Automatic Electronic Sectionalizer

Smart solutions for A Brighter OutdoorABB portfolio for MV Outdoor networks

Padmount Single-Phase Disconnectors

Model

Applicable Standard

Maximum Rated Voltage

Maximum Rated Current

Maximum Icc

Installation

Technology

Model

Applicable Standard

Application

Communication

Main features

IED & Control Cabinets

Main features

Main Function Circuit Breakers Reclosers Load Break Switches/Sectionalizers Fuse Cutouts & Disconnectors

R-MAG

ANSI

38kV

3700 A

40kA

Substations

Vacuum

Magnetic Actuator

Automation-Ready

High Reliability

EmbeddedPoles

RER620/RER615

IEC61850, DNP 3.0, IEC 60870-5-101/104, Modbus

WebHMI, Single-Phase Tripping Functionality and High Impedance Fault protection function

Reclosers

ANSI/IEEE/IEC/GB

Wireless controller for remote control and monitoring through GPRS

Local IEC60870-5-101

REC601/603

Remote control and monitoring, protection, fault indication, power quality analysis and automation for disconnectors & switches; HMI Display

IEC 60870-5-101/104, DNP3 level 2 and Modbus, IEC 61850

REC615

ReliaPad

ANSI/IEEE

27kV

800 A

12.5kA

Padmount

Vacuum

HCEP bushings

Dead-Front

Sectionalizer function available

Air-Insulated switches

Sectos

IEC/GB/IEEE

36kV

630 A

20kA

Pole Mount

SF6

Flexible mounting arrangements

Two or three-ways, earth switch available

Sealed tank for zero maintenance

Upgradeable to fully automated

NPS

IEC/GB

36kV

630 A

20k

AutoLink

ANSI/IEEE

38kV

200 A

4kA

Air

HCEP bushings

Mounting versatility

Modular configurations

Upgradeable to fully automated

-

Field Configurable

Resettable

Fits in cutout body

1 or 3-phase, Wireless, load break versions

DCD/SID

900 A

40kA

-

Double or single-insulator

Flexible mounting

RBD

Air

ICX

200 A

20kA

Fuse

Interchangeable

Single-venting

expulsion

ANSI/IEEE/IEC/GB

38kV

Porcelain, Silicon or Polymer concrete insulators

NCX

Fuse

Non-

interchangeable

Double-venting

expulsion

EUH

Fuse

Load Break

Combination

with arresters

ready

PVB

IEC/GB

12kV

630 A

20kA

Pole Mount

Vacuum

HCEP bushings

Low maintenance

OVB-SDB

IEC

15kV

2000 A

25kA

Substations

Vacuum

Porcelain bushings

Telescopic Arrangement

Spring mechanism

Capacitor switching duty available

OVB-VBF

IEC/GB/GOST

40.5kV

2500 A

31.5kA

Substations

Vacuum

OHB

IEC/GB

40.5kV

2500 A

31.5kA

Substations

SF6

GridShield

ANSI/IEEE/IEC/GB

38kV

1250 A

16kA

IEC61850 native & all protocols available

IEC 61850 with GOOSE messaging, DNP3, Modbus, IEC 60870-5-101/104 protocol.

Easily upgradeable from manual to motor and fully automated

Contacts in Vacuum environment to avoid oxidation and contamination

High quality, 3 mm stainless steel tank

ABB globally recognized vacuum interrupter

Spring mechanism, easily upgradable from manual to motor and fully automated

DNP3.0, IEC101-104, ModBus

Pole Mount / Substation

Vacuum

HCEP bushings

Single-Phase tripping available

Pole Mount

12.5 kA

Single-Phase Three-

Phase

Stainless Steel enclosure

Stainless Steel

Embedded Poles

Flexible mounting options

27kV 15.5kV

630 A 800 A

OVR-3 OVR-3SP OVR-1+ OVR-15

DNP 3.0, IEC60870-5-101/103, Modbus

Single-Phase Tripping Functionality, HMI, Modularity

PCD

Outdoor Dead Tank Vacuum Circuit Breakers

Outdoor LiveTank Circuit Breakers

Pole Mounted Circuit Breaker

Reclosers SF6 Load Breaking Switches

Three-Phase Air Insulated Switches

Fuse Cutouts

Main overcurrent and earth-fault protection for overhead lines and cable feeders, in either isolated neutral, resistance-earthed, compensated or effectively-earthed distribution networks, depending on the standard configuration.

IEC 61850 ; IEC 60617; IEC-ANSI

Feeders

REF615

®Copyright 2014 ABB. All rights reserved.While every effort has been made to assure accuracy, the information in this document is subject to change without notice.

www.abb.comwww.abb.com/mediumvoltageYouTube Channel: ABBMVideo & ABBPOWER

Contact

1YS

A16

0054

- EN

G M

AR

CH

201

5.