9 Feet Umbrella with Tilt and Crank

Installation Manual

Abba Patio

Finial

Hub

Vent

Canopy

Crank handlingCrank housing

Low pole

Umbrella supplied is fully assembled. Please read instructions prior to installation. Take all parts out of the box. If any parts are missing, please do not return to the place of purchase directly. Please email us first ser vice@abbapatio.com

A. Assembled umbrella frame with canopy 1pc

B. Holder pole 1pc

A 1

1B

Abba Patio

Frame & Ribs

Upper pole

Tilt mechanism

1. Screw to connect the t wo parts (A and B)

1

3. Use one hand to hold the pole and then press the but ton.Use the other hand to hold the umbrella canopy to tilt lef t or right to change its direction.

3

Abba Patio

2. Turn the crank handle clockwise in the up direction to open thecanopy fully, take care not to force the mechanism. Turn the crank handle anticlockwise in the down direction to close the canopy. To close the umbrella it must be in the upright position.

2

And if you install this umbrella with your table, please make sure the crank handle is higher than your table.

The pole diameter is 1.5 inches (38mm)，the base diameter needs to be wider than 1.5 inches.

While the base is NOT part of the umbrella frame, it is a crucial part of the overall components as it gives the umbrella stabilit y and allows the umbrella to remain upright. Please check below tochoose the suitable base.

Shade Sizs(ft) Positioning MINIMUM Base SizeSuggestions(Ibs)

9 44

55

Thru Table

Free Standing9

2.62 feet

Abba Patio

Abba Patio

Thanks for choosing Abba Patio products.We’d love to hear your thoughts, and so would other customers.If you are satisfied with our products and service, please let us know. If you have questions or feedback, we’re here to help!service@abbapatio.com (We will reply you within 24 business hours)

Also be sure to follow us on Facebook for promotions and specials of fers. ht tps://w w w.facebook.com/abbapatio

Email: ser vice@abbapatio.com