abdusamed ahmed - nust.edu.pk section/eme... · software, ansys, matlab, autodesk ... mini projects...
TRANSCRIPT
Abdusamed Ahmed
House # 254, Street 77, F 11/1, Islamabad, Pakistan
0313-566 9366
Objective
Enter a professional company where I can use my knowledge, skills and experience for the advancement of the company and my professional career.
Summary Extensive knowledge in many energy conservation practices
Keen interest in HVAC and energy conservation
Claimed by others to be innovative thinker
Extensive computer training, including knowledge of multiple networking environments and engineering software, Ansys, Matlab, Autodesk Inventor,
Enthusiastic and experienced in overseas living
Interest HVAC systems and programming hardware
Currently designing and fabricating Energy Recovery Ventilator
Education Undergraduate B.E Mechanical Engineering
NUST E&ME, Rawalpindi
2009- 2014
American High School Diploma
ISG Dhahran American High School, Saudi Arabia
Took 3 AP [college level] courses
cGPA – 3.7/4.0
2007-2009
O-Level IGCSE
ISG Dhahran British Grammar School, Saudi Arabia
2005-2007
Internship Experience
Attock Refinery Limited [15,000 barrel/day capacity]
Hands on experience with refinery plant and its operations
Water Treatment plant
Plant maintenance Health and Safety Department
Power plant
Hand on experience with:
Witnessed Pump Vibration inspection and alignments
Repairing tubes in shell in tube heat exchanger Power plant engine’s maintenance [3 Diesel engine each rated at 3.5MW]
Valve workshop and gasket maintenance/cleaning
Screw compressors, reciprocating pumps, boilers Distillation and vacuum distillation column
4 weeks
Summer of 2013
Pakistan Oilfield Limited
Hands on experience with Decanting facility, Gas sweetening plant and oil well site:
Health and Safety department briefing with fire and gas hazard precaution/work permit experience
Gas sweetening plant’s valves, operation and flow chart briefing
48kW power plant generators/3900 horsepower Catterpliar/Wiskia Management experience with on site and off site work
Siemen’s electric 10Hp, 2905 RPM hand on experience
Worked with reciprocating and centrifugal pumps used with pumping water and oil from Khaur to Morgah
Offsite well experience with recording data and regular checkup at Pirwali Wells/Domial Field also with Well Head Control Panel
Experience with Gas processing plant built by Presson- Canadian company Gas sweetening plant exposed with Amine Units, glycol unit and plant/shell in tube heat
exchangers
Worked in a decanting facility with a capacity of 18,000 barrels per day.
4 Weeks Summer of
2013
Project Experience
Piston Induction Project
Innovative project in which electricity was generated from piston motion which allows the opportunity to remove the use an inefficient alternator and also makes it possible to start the engine without the use of a starter motor
Experience Gained
Piston Heat and Engine body heat distribution
Electric machines
Piston dynamic motion
Magnetic flux distribution which varies with distance
Modeling
Manual Blender Project
Manual Blender designing and manufacturing Experience gained
Material Selection
Design changes on the spot
Metal Working
Wood Working
CAD modeling
Stress Analysis Simulation
Gear making
Automotive suspension system Matlab model
Matlab experience
Basic automotive suspension working
Other Experience Machine Experience Lathe machine, milling machine, gear making
machine,
Software tools Autodesk Inventor, Solid works, Matlab , Pro/E, Autodesk Inventor Stress Simulation, Solidworks 2013,2014
Other Software Experience Microsoft Word, Excel, Adobe Photoshop, GIMP, C, Python, OpenOffice[LibreOffice], Graphic Designing
OS Windows XP, 7 and 8 - 2 year Linux Experience [Ubuntu, Fedora]
Extracurricular Activities
• NUMUN 2011 Participant
• Marketing and promotion
• Member Press Club Member
• Photography Team member
• Member in Habitat for Humanity
• Cricket Team player
• Volleyball Team player
Other Activities
• Table tennis, Cricket
• Online gaming
• Social networking [Linkdin, twitter,Facebook, ,Engineering Forums]
• Emailing
• File Sharing [webhosting, LAN file]
To obtain such a position that offers growth, challenge, career opportunity and enhance my organizational, personal and technical skills through hard working in a dynamic and challenging environment.
EDUCATION
College of EME NUST, Rawalpindi
Bachelor of Mechanical Engineering
F.G. Sir Syed College, Mall Road Rawalpindi
(Pre Engineering)
PROJECTS
Matrix Calculation & Calendar making using C++
Fourier Series Analysis of Electrocardiograph (ECG)
Fourier Series Analysis of damping in Simple Harmonic Motion
Mathematical Simulation of Wind Mill by using Probalistic Optimal Control System
Fuel Injection Mechanisms in IC Engines & their analysis
Paper on Strain Gauges
FINAL YEAR PROJECT Study on Solar Ponds as alternative energy resource
ACHIEVEMENTS & COCURRICULAR ACTIVITIES
Mini projects (course related)
2nd Position in Speed Designing at Thermocon’12
3rd Position in Brainiac at Thermocon ‘12
Scouting and Hiking
Problem Solving
REFERENCES Reference will be provided if required.
SKILLS
TECHNICAL SKILLS
MATLAB
Pspice
Pro Engineer
C++(Programmi
ng)
CAD / AUTOCAD
ANSYS
INTERPERSONAL SKILLS
Strong leadership
and presentation
skills
Collaborative
problem solving
and Organising
OTHER SKILLS
MS Word,MS
Powerpoint
Project
Management
MUHAMMAD ARSALAN SAJID House # E-3/3, Street 13, Sector E-8, Naval Complex, Islamabad
Phone (Res.): +92-(0)-51-20065110 Cell: +92-(0)334-5457827
E-mail: [email protected]
AZKAR ASGHAR
Mughal Colony, Bismillah Chowk, Badshahi Road, Gujrat 03417220502
Objective To grow in a competitive environment and work for the benefit of industry using the tools obtained in the process
of academic and practical learning
Education
Sr. # Degree/ Certificate Year of passing
Institution Percentage/ GPA
Remarks
1 Matriculation 2008 Govt. Zamindar High School, Gujrat
94% A+
2 Intermediate 2010 Punjab College of Sciences, Gujrat
91% A+
3 Graduation 2010-14 College of E & ME, NUST, Rawalpindi
2.79/4.00 In Progress
Cocurricular Achievements and Awards
Got 94% marks in matric examination, being among top 10 students in BISE Gujranwala, entitled to the
scholarship offered by BISE Gujranwala
Got merit scholarship offered by Punjab Education Endowment Fund (CM punjab’s program)
Obtained 91% marks in F.Sc exams with distinction of being among top 20 students in BISE
Gujranwala
Got 99th position in the Entrance Test of NUST, being eligible for full fee waiver for one semester
Scored 81 marks in GAT-General Test. (99.64 Percentile)
Projects
Fabrication of demonstration model of Stirling Engine
Static analysis of a piston in the engine under different forces acting on it
Demonstration model of Cone type Continuously Variable Transmission (CVT)
Programming of Snake-X game in C++
Modeling of the control system of a motor actuated valve
FINAL YEAR PROJECT: Design of Waste Heat Recovery based HVAC system in Kohat Textile Mills
Work Experience
6-Weeks internship at Service Industries Limited Gujrat
(Mold Production and Maintenance Department)
Extracurricular activities
Director “Make a Difference” Wing in NUST Volunteers Club 2014
Member of ASME, EME Student Chapter, Deputy Director of Logistics Wing 2013
Director HR Wing, EME Inertia 2013
Director Event Management in GO Green Week 2013
Software
MS office, AutoCAD, C++, Solidworks, Pro-E, MATLAB, ANSYS
BASIT TUFAIL
Address: House No. A3, DHQ Hospital Colony, Attock. (can manage to reside at Lahore)
Phone: +92 342 6749 759; E-mail: [email protected]
Objective
Seeking a position in your organization where I can prove my skills and loyalty in exchange
for career guidance, training and opportunity for advancement.
Education
College of Electrical and Mechanical Engineering, NUST.
Bachelor of Engineering in Mechanical Engineering, 2010-2014.
(CGPA 3.07/4)
Army Public School and College System, Attock Cantt.
HSSC (Pre-Engineering) 2008 -2010
Percentage: 89% (979/1100) Grade: A1
Work Experience Three Week Internship at Pakistan Aeronautical Complex (15/07/2013 – 02/08/2013)
Manufacturing and Machining Processes (CNCs, Lathes)
Destructive and Non Destructive Testing Techniques
Supply Chain Management
Semester Projects Design of Waste Heat Recovery System for Kohat Textile Mills (FYP)
o Design of HVAC Piping System o Design Of Oil to Air Heat Exchangers
Design And Analysis of Crank Operated Crossbow using Solid-Works/Pro-E Control System Design for A Motor Actuated Control Valve using MATLAB/Simulink Design and Fabrication of Cone - Continuously Varying Transmission (CVT) Modeling and Dynamic Stress Analysis of CI Engine Assembly using AutoCAD
Personal Profile Effective Communication skills
Profound Leadership qualities
Interactive Team player
Self Motivated
Professional and Management Skills Student Ambassador - Placement Office (May 2013 – Present)
Director - NUST Volunteers Club (June 2013 – Present)
Director Logistics – EME Olympiad 2013
Director Logistics – Go Green Festival 2013
Director Logistics – EME Inertia 2013
Co-Curricular and Extra-Curricular
1st in College at HSSC-II Examinations 2010 (Pre-Engineering)
Among Top 15 all over Punjab in “International Kangaroo Mathematics Contest”
Member of University Football Team
Member of Department Badminton Team
Software Proficiency Programming : C++, MATLAB
Documentation : MS Office (Word, PowerPoint, Excel)
Designing Tools: AutoCAD, Pro-Engineer, Solid-Works
References Shall be available on request
BILAL AHEMD Permanent Address: Street No. 1, House No. 9, Shadman
colony, University Road, Sargodha , Pakistan
Contact No: +92-331-7643423
Email Address: [email protected]
OBJECTIVE
Seeking a challenging position as a trainee engineer in a progressive organization, with an aim to contribute
towards the goals of the organization to the best of my abilities and to enhance my level of competency in
engineering
EDUCATIONAL QUALIFICATION
2010 – 2014(Final year) BE Mechanical Engineering, NUST College of EME, Rawalpindi 2.34/4.00
2007 – 2009 Intermediate, FSC Pre-Engineering, Dar-e-Arqam Model College Sargodha 73%
2005 – 2007 Matric, Science (Biology), Dar-e-Arqam Model School Sargodha 76%
TECHNICAL SKILLS
3-D Modeling and Simulation: AUTO CAD, SOLID WORKS and PRO-ENGINEER WILDFIRE
Programming language: C++, MATLAB
Microsoft Office Word, Power Point, Excel
ACADEMIC PROJECTS
Final Year Project: Design and fabrication of smart car.
Control system design for controlling speed of a three wheeler sprayer via motor.
Modeling and Stress Analysis of Spark Ignition Engine Piston.
Controlling a remote control toy car using parallel port programming.
Design and fabrication of Model Transmission Box of a vehicle.
Construction of a single phase Alternating Current Transformer.
Worked on cooling system of engine of AL KHALID tank.
WORK EXPERIENCE
4 weeks internship at DESCON integrated projects limited in construction management department
EXTRACURRICULAR ACTIVITIES
Acted as a member (Assistant Director Public Relations) and Event Head EME Olympiad
Worked under NUST Volunteers Club
Organizer at ASME EME Chapter
Worked under NUST Science Society
Attended an industrial exhibition held at EME.
PERSONAL PROFILE Excellent managerial skills
Interactive Team player
Ethically strong and possessing great will power
*References will be provided on request.
BILAL NAVEED Mobile: +92-347-7136939 Address: House No. 4/5, Al-Mustafa Colony,
Email: [email protected] near BWP By Pass Chowk, Multan.
OBJECTIVE
My goal is to become associated with a company where I can utilize my skills and gain further
experience while enhancing the company’s productivity and reputation with the best use of my
dedication, determination and resourcefulness.
EDUCATION
Qualification Institution Duration Performance
BS in Mechanical
Engineering
College of Electrical and Mechanical
Engineering, NUST, Rawalpindi, Pakistan
2010-2014
3.27/4.00 (81.8%)
(Till 7th
semester)
Higher Secondary School
Certification (HSSC)
Muslim Public Higher Secondary School 2008-2010 985/1100 (89%)
(Distinction)
Secondary School
Certification (SSC)
F.G Boys High School No.2 Multan 2006-2008 656/850 (77%)
SEMESTER PROJECTS
Programming-Made a linear circuit solver for electric circuits in C++
Manufacturing- Manufactured a Transformer winding machine for core winding
Internal Combustion Engines- Theoretical study on Superchargers and Turbochargers
AC and Refrigeration-Calculated the cooling load of an assigned room
Automotive Engineering- Manufactured a hardware project on Ackerman steering system
TECHNICAL SKILLS
Solidworks Pro-E AutoCAD
MATLAB C++ MS Office
INDUSTRIAL VISITS
KSB Pumps, March 2012, understanding the working of Foundry and Casting processes.
Rastgar Engineering Co. April 2012, understanding the Foundry, casting and machining processes at automatic plants.
INTERNSHIPS/EXPERIENCE
Nestlé Pakistan Ltd., August-September 2013, 4 weeks internship on physical asset verification according to working condition and operation at Kabirwala plant. (Paid)
Kohinoor Textile Mills, June 2013, 4 weeks internships at powerplant department of the industry.
HONORS AND AWARDS
NUST Academic Distinction Scholarship holder In 3 semesters
Position holder in F.Sc (Pre -Engineering) at college
Got Extraordinary Academic Performance Scholarship at college
Winner of Football Tournament in Annual sports festival at college
Academic Performance Scholarship holder in class 5tH and 8thin Federal board
EXTRA CURRICULAR ACTIVITIES
Event organizer in ‘’EME Olympiad 2013’’ at EME College
Technical team member in ‘’SHELL ECO MARATHON’’
Event organizer(Brain Juice ) in ‘’EME Inertia 2013’’
Participated in Commandant’s ‘’GO GREEN PROJECT’’
INTERESTS
Modeling and Simulation
Reading novels and E-Gaming
Playing Squash, Football and Badminton
HAMZA AHMED Contact
Cell No. +92-345-4171631 House No. 9, Street No. 11, Mian Mir, Upper Mall Lahore [email protected] Objective To enhance my working capacities, professional skills, technical efficiencies and
to serve my organization in best possible way with sheer determination and commitment.
Education 2010 to 2014 Bachelor of Engineering (Mechanical)
NUST College of E&ME, Rawalpindi CGPA: 3.75(Out of 4.00)
2008 to 2010 GCE A Level (pre-engineering) Beaconhouse School System, DHA Lahore Result Obtained: 3A*’s, 1A
2006 to 2008 GCE O Level (pre-engineering) Beaconhouse School System, DHA Lahore Result Obtained: 7A’s, 2B’s Final Year Project
Design, Analysis and Fabrication of a Radio Controlled Under Water Vehicle.
Semester Projects
Design, modeling and Fabrication of a Wheelchair.
Controlling temperature of a room using PID Controller.
Design and Fabrication of Continuously Varying Transmission.
Research Study Of Laser Ignition in Engines.
Programming of Scrabble in C++.
Design and fabrication of Mechanical Jack.
Achievements
Awarded NUST merit-based scholarship in all semesters for scoring 3.50+ GPA.
Awarded merit based scholarship in A Level by Beaconhouse School System.
Awarded merit based scholarship in O Level by Beaconhouse School System.
43rd position in Kangaroo Mathematics Competition out of 10,000 participants.
Leadership Experience
Director Logistics in EME Olympiad. April,2013 to present
Director Public Relation in EME Inertia. Oct, 2012 to present
Deputy Director Logistics in EME Olympiad. April,2012 to April 2013
Organized ‘Battle of the Bands’ at Beaconhouse School System Feb 2010
Professional Experience
Internee at NESPAK July,2013 to Aug, 2013
Internee at Samad Rubber Works. July,2012 to Aug, 2012
Taught at SOS. July,2010
Taught at Care foundation. June,2009
Software Skills
MS. Office AutoCAD C++
Pro Engineer Solid Work Matlab
Languages
English Urdu Punjabi
Interests and Hobbies
Squash Trekking/Hiking
A self-driven and focused student of Mechanical Engineering, who possess effective presentation, negotiation and communication skills. It is my earnest desire to become a part of a dynamic organization which will provide me opportunity to enhance and practice my engineering skills.
EDUCATION
College of EME NUST, Rawalpindi Bachelor of Mechanical Engineering CGPA: 3.44 Completion Year: June 2013
Punjab College of Sciences. Higher Secondary School (Pre Engineering) Completion Year: 2010
PROJECTS
Development and fabrication of an off-road vehicle for participation in Baja SAE
Design and fabrication of Hexapod mini bot RC car controlled through computer via parallel port by
using BJT’s as a switch
Position and velocity control of an exoskeleton arm
Geometric modeling of an acoustic detonation pressure wave in an SI engine
Designing of Jig for mass production of a machine component
Double wishbone suspension design for an off road vehicle
FINAL YEAR PROJECT
Design and fabrication of a powered exoskeleton arm actuated by EMG signals
ACHIEVEMENTS & HONOURS
NUST Merit scholarships in two semesters on scoring high GPA.
PEEF merit scholarship for university education. PEEF merit scholarship for college education. Scholarship from Bise Gujranwala in 2007 & 2009. Speech competition winner at district level organized by
Bise Gujranwala.
WORK EXPERIENCE
Six week internship at Attock Refinery Limited.
SKILLS
TECHNICAL SKILLS
Solid modeling (Pro-Engineer) Finite Element Analysis (ANSYS) Control system designing and
numerical computing(Matlab) CAD (AUTOCAD) CNC programming (CNC
simulator pro) Instrumentation (Labview) Suspension designing (SHARK)
RESEARCH EXPERIENCE Author of “Geometric modeling of
acoustic detonation pressure wave in a standard SI engine” presented at 5
th international
conference of Electrical and mechanical technology in China. http://www.scientific.net/AMM.392.146
Winner of two awards at ICOMS 2013 held at Air University, Islamabad for writing a research paper.
LEADERSHIP EXPERIENCE
SNS (Student representative of authorities of NUST) for the year 2013-2014.
JNS (Junior student representative of authorities of NUST) for the year 2012-2013.
CO-CURRICULAR
Member of ASME (EME chapter). Member of Mensa Pakistan. Member of organizing team of
EME Olympiad.
MUHAMMAD TALAL JAMEEL House # 206, street # 6, Daska Kalan, Daska.
Phone (Res.): +92-(0)526-610615 Cell: +92-(0)331-6736065
E-mail: [email protected]
PERSONAL INFORMATION
Name Father Name
MEHROZ HAIDER MEHMOOD AHMED
Address House #1-shahim villas sehajpaul road DHA phase 8 commercial Broadway Lahore cantt Telephone 03334563821
E-mail Nationality Date of birth
[email protected] Pakistani 9-9-1991
WORK EXPERIENCE
• Dates (from – to) 7 JUNE 2013 – 11 JULY 2013
• Name and address of employer Indiana University (Kelley Institute for International Business) USA
• Type of business or sector Entrepreneurship
• Occupation or position held • Main activities and responsibilities
Internee At Indiana university we met with different entrepreneurs of America and had lectures on entrepreneurship for 3 weeks and also had many company visits including Coca-cola production Plant and Coca-Cola HQ Atlanta USA.
• Dates (from – to)
• Name and address of employer
19 JUNE 2012 – 22 JULY 2012
Tetrapak plant Pepsicola International Lahore
• Type of business or sector Production Plant
• Occupation or position held Internee
• Main activities and responsibilities
• Dates (from – to)
• Name and address of employer
Work on maintenance and operation of Plant
20 August 2012 – 10 September 2012
Pakistan Civil aviation authority (Allama iqbal international airport lahore)
• Type of business or sector Mechanical Section of Airport (HVAC, Escalators and Elevators)
• Occupation or position held • Main activities and responsibilities
Internee Regular Visit of different Mechanical sections to understand the Operations and Maintenance
EDUCATION AND TRAINING
• Dates (from – to) School/College
• Dates (from – to) School/College
• Dates (from – to)
University CGPA
• Software skills covered
O-levels (2005 – 2008) Garrison academy for boys Lahore cantt
A Levels (2008 – 2010) Garrison Academy for boys Lahore cantt
BE Mechanical Engineering (2010 – 2014 )
NUST college of E&ME
3.23 (till 7 semesters)
Solid Works, Pro Engineer, Ansys & C++
ACHIEVEMENTS
1- Got selected as an Ambassador of Pakistan for Global business institute program 2013
(MENA scholarship) at Indiana University, INDIANA USA , sponsored by US Department of
states and Coca-Cola Company.
2- Won First Prize at Global Feasibility Study Competition 2013 held at Indiana University
USA
3-Honored with NUST high achievers Award from president of Pakistan.
4-Won Runner-up Prize at National Competition, Preston Entrepreneurship Challenge 2014
5- Participated in Punjab Olympics and got second standing in football
6- Awarded scholarship in A levels. 7- Got second Position in International Kangaroo Mathematics Contest
PERSONAL SKILLS
AND COMPETENCES
MOTHER TONGUE
OTHER LANGUAGES
URDU
ENGLISH AND PUNJABI
SOCIAL SKILLS AND COMPETENCES
1- Deputy president of Society of Promotion of Arts and Literature ADMIN wing of E&ME college NUST 2- Organizers/Event Head (Assistant Director Public Relations) at EME Olympiad 2011, 2012
& 2013
3- Served as Deputy Director and Member of American society of Mechanical Engineer EME
chapter
4- Have performed Theatre at University and college level.
5- Good in football, cricket and swimming.
ACADEMICS PROJECTS
.
INDUSTRIAL EXPOSURE
1- Final year project-Designing and fabrication of a New vertical axis fully submerged turbine
with Flipping blades
2-Designed solar water purifier at Indiana University USA
3- Designed model of new Internal combustion Pistonless engine.
4- Successfully converted Gasoline engine into Compressed air engine.
5- Designed and fabricated RC plane for Design Build and Fly Competition in GIKI.
6- Technical member of the team for Shell Eco Marathon 2012. (Malaysia)
Coca cola Production Plants USA , KSB pumps hassanabdal & Rastagar Industries Islamabad *References shall be furnished upon request
[email protected] 0342-5430178
Muhammad Moiz Subhan
CARRER OBJECTIVE
To be expert in practical field through dedication, commitment, preservance and continuous improvement. Challenging
and rewarding upper-level position in a growth-oriented organization, which offers diverse job responsibility in
mechanical engineering and will fully utilize both my technical and managerial abilities.
TECHNICAL SKILLS
1. Solid Works 2. Pro-E wildfire 4 3. Microsoft Visual C++ 4. MATLAB 5. Autodesk Inventor 2010 6. Microsoft Office 7. Report Writing
ACADEMIC QUALIFICATION
LEVEL STATUS GRADE/GPA BOARD/UNIVERSITY
BE(Mechanical) 2010-2014 CGPA = 3.34/4.0 National University of Sciences and Technology
HSSC 2010 Marks=959/1100 Federal Board of Intermediate and Secondary Education
SSC 2008 Marks= 744/850 Federal Board of Intermediate and Secondary Education
SEMESTER PROJECTS
1. Presented research based work on Piezo Electric Materials as renewable energy source. 2. Programmed Matrices calculator using C++ 3. IC Engines project on parametric study of engine for reducing the emissions and increasing the efficiency 4. Designed and Fabricated Multi-slicer Machine. 5. Designed the model of Regenerative Braking System using Basic Electronics 6. Generic code to evaluate Strain gauge Rosette data and plotted results using MATLAB 7. Implementation of Generic Algorithm for plotting Mohr’s Circle in MATLAB 8. Design and Fabrication of Compound Drive train.
FINAL YEAR PROJECT Design, Analysis, Manufacturing and Installation of Condensing Economizer for Waste Heat Recovery at Pearl
Continental Hotel, Bhurban.
PUBLICATIONS/TRAININGS/CONFERENCES
1. Attended Creative Leaders Conference held in Islamabad 2009 2. Attended training workshop on Pro-E held at CEME NUST. 3. Top 50 in All Pakistan Mathematics Contest “Mathlete” held in March 2012.
EXPERIENCE Four week internship in “Pakistan Ordnance Factories (POF)”.
Six week internship in “Kahuta Research Labs (KRL)”.
Mubashar Sharif Mechanical Engineering Department Cell# 0334-4618412 College of E&ME, Peshawar Road Rawalpindi Email id: [email protected]
Objective Aspiring to work in an organization where I can prove my skills, expertise and loyalty to achieve a motivated, mobile, and professional workforce that can provide excellence in my career and long term relationship.
Education
B.E. Mechanical Engineering, 2014 National University of Sciences & Technology (NUST), College of E&ME, Rawalpindi.
Higher Secondary School Certificate, HSSC, 2009 F.G. Degree College, Kharian Cantt.
Secondary School Certificate, SSC, 2007 CBA Model College Jandala, Gujrat.
Senior Design Project
Solar Dryer for Medicinal and Aromatic Plants (MAPs) - Designing, Simulation and Fabrication of a lab scale model - Funded by U.S. Aid – 3 commercial scale plants will be installed in different
Union Councils of Sawat District, under our supervision in collaboration with the Industry, based on our proposed model
Semester Projects
Control Systems – Simulated a PID Controller for active suspensions system of bike
Design of Machine Elements – Designing, modeling and analysis of a Wind Mill Assembly. Also fabricated a model of above
Refrigeration and Air Conditioning – Research on the Airplane Air Conditioning and ice-breaking from Aircrafts
IC Engines –Research Analysis, modeling and simulation of a Compressed Air
Engine Automotive Technology – Manufacturing and Assembling of a Continuous
Variable Transmission (CVT)
Skills and Expertise
Workshop skills (Welding, Forging, Woodworking, Casting, Machining) Simulations Software (MATLAB, Ansys, SimuLink) Design Software (SolidWorks, Pro-E, AutoCAD) Programming (C++, Turbo C, GW Basic, CNC Programming) MS Office (Word, PowerPoint, Excel, Database Access)
Interests and Activities
Book Reading Engineering Projects
Extracurricular Activities
Sports
1st position in Essay Writing Competition at District Level
Appraised and participated in Airbus Fly Your Ideas 2013 innovative
International Competition
Organizer of Mini-Shell ECO Marathon 2013 held at College of E&ME, NUST,
Islamabad
Director Marketing and Promotion EME Inertia
Performed Duties of House Captain in School
Chess, Swimming, Badminton, Football
* References can be furnished on demand
MUHAMMAD NOUMAN Home Address: H.No:16 E 121 POF Wah Cantt
Email: [email protected] Phone: +92-332-5440758 Date of Birth: 17-11-1991
Objective: To work in result-oriented organization that seeks an ambitious and career conscious person, where acquired skills and knowledge will be utilized in exchange for career guidance, training and opportunity for advancement. Education: 2010-2014 BS Mechanical Engineering, COLLEGE of EME, NUST, Peshawar
Road Rawalpindi. 2.88/4
2008-2010 FG Science Degree College for men Wah Cantt 854/1100
2006-2008 P.O.F Model High School Wah Cantt 632/850
Final Year Project: Design and Fabrication of Vehicle Door Using Composite Materials
Semester Projects: Anatomization of stresses on a V-12 Engine crankshaft vulnerable to varying imposed forces
Design and Fabrication of 4 Wheel Steering System
Design and Fabrication of Oil Pump
Design and Fabrication of SEM Car Body using Composite Materials
Case Study of R.D.F plant , under E&ME Go Green Drive 2013
Work Experience: Pakistan Ordnance Factories, Wah Cantt 4 Weeks
Heavy Mechanical Complex, Taxila 4 Weeks
Technical Skills:
Abaqus, Ansys
Auto CAD , Pro Engineer
MATLAB, Solid Works
Autodesk Simulation Composite Design
Microsoft Office, Windows XP & 7.
Honors, Awards and Achievements: Won POF merit Scholarship, 2008 and Benevolent Fund (2010-2013) Scholarship for
outstanding academic performance.
Event Head of Bridge Building Competition at EME Olympiad 2013
Industrial visits
o Fiber Craft Industry, Lahore
o KSB PUMPS
o Razmak Marks
Extra-Curricular Activities:
Reading newspaper and novels related to daily life.
Cricket, Swimming and Badminton.
Professional Activities/ Experience: Poster Presentation on Water Vending Machine in Technical Report Writing Course.
Event Head in Bridge Building Competition in EME Olympiad 2013
Presented Elevator Pitch in PIF Grand Challenge
Muhammad Saad Arshad
Contact: 0092 334 7673321 Email: [email protected]
Residence: 1628/23, Qazafi Street, Nawabpur Road, Multan, Pakistan
Career Objective: To undertake a challenging career opportunity in your organization where I can utilize my techno-managerial skills to achieve mutual success and growth. Actively pursuing new challenges, I welcome the opportunity to work in your network delivering desired results and value to consumers. Versatile engineer, I possess strong technical and problem solving skills with the ability to perform physical work in remote areas and challenging conditions. Confident I would make a great addition to your team.
Education
Qualification Institution Duration Performance
BS in Mechanical
Engineering
College of Electrical and Mechanical
Engineering, NUST, Rawalpindi, Pakistan 2010-2014
3.67/4.00
Higher Secondary School
Certification (HSSC) Government Emerson College, Multan, Pakistan 2008-2010 1008/1100
Secondary School
Certification (SSC) Nishat High School, Multan, Pakistan 2006-2008 801/850
Semester Projects: Final Year Project- Design and Installation of Solar Collectors(Single Adjustment) at Indoor Swimming
Pool at PC Bhurban.
Programming - Made the game scrabble using programming language c++.
Manufacturing - Manufactured a screw jack for a vehicle.
Internal Combustion Engines - Worked on Laser Ignition Technology in IC Engines.
Technical Writing - Gave a poster presentation on Hybrid Cars in Technical Writing.
Automotive Engineering-A detailed study on Active Steering System.
Design of Machine Element- Designed and fabricated a lawn water sprinkler.
Control Systems- Controlled the temperature of a standard room using a PI controller for the thermostat using
Skogestad Method.
Work Experience: I worked as an intern in the Processing Department at TetraPak from June 13, 2012 to July 20, 2012. During my
time there I
Worked on the production module PE1 of SAP which included invoices and parts updation.
Visited the Plant to observe the automated mechanism of packaging.
Assisted in resolving the security system of the Processing Store.
Drafted a report on SOP of the employees working on the SAP Software.
Extra-Curricular Activities: Ambassador of LUMS PsiFi 2013.
Event Head of Fast & Curious in EME Inertia 2013 and Sand Structures in EME Olympiad 2013.
Executive member of American Society of Mechanical Engineers (ASME).
Play cricket as a sports activity.
Awards and Achievements: National Talent Scholarship Holder throughout HSSC.
5th position in HSSC and 9
th position in SSC in Multan Board.
Muhammad Shahan Ali
House # FM-88, F.F.C Town Ship, Goth Machhi, Sadiqabad, Rahim yar khan Mobile: +92-321-7341127
+92-331-5132127 Home: +92-068-5786420-4588 Email id: [email protected]
Objective: To obtain a challenging position in a progressive organization where I can contribute towards the aims of organization and develop my managerial and technical skills by working with a team of dedicated and experienced people.
Academic Record: BE Mechanical
College of Electrical and Mechanical Engineering (CEME), NUST CGPA (till 7th semester): 3.12/4.00
Higher Secondary School Education (pre- engineering) F.F.C Grammar College, Sadiqabad 949/1100 (86.27%)
Secondary School Education F.F.C Model School Sadiqabad 805/850 (distinction)
Work Experience / industrial visits:
Six weeks internship at Fauji Fertilizer Company Ltd. ( FFCL )
Educational trip to K.S.B Pumps
Educational trip to Rastagar industries
Educational trip to Fatima Fertilizer Company Ltd
Educational trip to Askari Cement
Educational trip to JDW Sugar Mills Ltd.
Semester Projects:
Final year Project: Design and Fabrication of a Shell and Tube type Heat Exchanger
Internal Combustion Engines - Worked on Superchargers and Turbochargers
Manufacturing - Manufactured a Projectile Gun
Design of Machine Elements- Manufactured a Ball Throwing Machine
Technical Writing - Gave a poster presentation on UNMANNED GROUND VEHICLE
Automotive Engineering- Manufactured a hardware project on Ackerman steering system
Programming - Made a linear circuit solver for electric circuits in C++
Control Systems- Controlled the speed of a CPU fan by a PID Controller
Technical Skills: Proficient in CAD/CAM Softwares (AutoCAD, Pro-e, Solid works,Matlab etc)
Excellent Managerial skills
Excellent Communication skills and team work
Awards & Recognitions: Attended a six days course at MPDD (Management of Professional Development
Department)
Attended a six days course at AGA KHAN UNIVERSITY, Karachi
Attended YLC (Young Leaders’ Conference) at SHERATON, Karachi
Appointed HEAD BOY (discipline in charge) in college as well as in school
Third position holder in Matric in BISE BWP
Received a medal from Chief Minister Punjab upon acquiring third position
NUST merit scholarship holder for securing GPA above 3.50 in 1st semester
Extra Curricular Activities:
President of SAS ( Sports and Adventure Society) in university
Director Sports at EME Olympiad 2013
Organizer at Mini Shell Eco Marathon
University champion of badminton and Squash
Represented university in Inter-University badminton and squash matches
Interested and fully aware of Current Affairs
Reading Newspapers and Novels
MUNAM BIN TARIQ
House # 1083, Street 43, G-11/2, Islamabad
Email: [email protected] Telephone: 051-2512416 Mobile: 0331-5280762
OBJECTIVE I intend to work in a competitive organization which could utilize my academic proficiencies and managerial
skills to utmost and I also aspire to become a valuable asset for a distinguished firm.
ACADEMIC QUALIFICATION
LEVEL STATUS GRADE/GPA BOARD/UNIVERSITY
BE(Mechanical) 2010-2014 CGPA = 3.25/4.0 EME NUST
HSSC 2010 Marks=983/1100(A+) FBISE
SSC 2008 Marks= 708/850(A+) FBISE
PROJECTS
Design and fabrication of unmanned ground vehicle (Final Year Project)
Presented article on Nanomaterials.
Multifunctional scientific calculator using C++
IC engines project on stratified charge engines.
Designed and fabricated multi-slicer machine
Designed the model of regenerative braking system using basic electronics
Generic code to evaluate strain gauge rosette data and plotted results using MATLAB
Implementation of generic algorithm for plotting Mohr’s Circle in MATLAB
Waveform representation of heat distribution plots in MATLAB
WORK EXPERIENCE
Have done internship at National Development Complex (Design Engineer) (June 08,2012 to July
09,2012). Description: I worked for one of the ongoing projects related to Mechanical Engineering. My
task was related to design, drafting and analysis of lamp mounts and fixtures.
Attended a visit to firm Mechanical Design Realm where I learnt G-coding in CNC lathes and ability of
engineering softwares to generate control algorithms for automatic machines
Attended visits to KSB Pumps, Askari Cements and Rastgar Industries organized by College to gain
industrial exposure
Delivered a lecture on “ MATLAB and its applications” at EME College NUST
ACHIEVEMENTS
Obtained merit based scholarships from CEME, NUST for achieving high GPA. (two semesters)
Won Gold Medal on attaining highest score in college in HSSC exam (Federal Board)
Among the first 50 highest achievers all over Pakistan (Pre-Engineering domain) in HSSC exam.(38th
position all over Pakistan and overseas).
Scholarship holder throughout the school and college level.
Among the top 50 students who participated in Math contest (Mathlete) all over Pakistan
SOFTWARES USED AND COMPUTER PROFICIENCIES
Microsoft Visual C++
MATLAB
Microsim PSpice 8
Autocad 2004
Pro-E wildfire 4
SolidWorks 2010
Adobe Photoshop
MS Office
Net Beans IDE 7.0
Eclipse
EXTRA-CURRICULAR ACTIVITIES
Organized an event “Project Promethean” in EME Inertia 2013
Attended a webprenuer academy session on “Marketing strategies and Webrepreneurship”
Volunteered in orphans gala “Angels on Earth” organized by Pakistan Bait ul Maal
Clean-up drive at EME NUST and social awareness campaign (off-campus service)
Participated in Bake-Sale event held at EME NUST to gather the funds for flood victims
MUNEEB AHMED
House # 409, Street 1, Sector G-8/2, Islamabad, Pakistan
Email: [email protected] Telephone: +92-51-2288185 Mobile: +92-313-5447718
OBJECTIVE
To undertake a challenging new career opportunity where I can utilize my relevant qualifications. I
look forward to be a part of corporate culture where I can enhance my technical and interpersonal
skills and be at the same time an excellent team player.
ACADEMIC QUALIFICATION
LEVEL STATUS GRADE/GPA BOARD/UNIVERSITY
BE(Mechanical) 2010-
2014
CGPA = 3.16/4.0
in 7 /8 semesters
National University of Sciences and
Technology
HSSC 2010 Percentage=88.3% FBISE
SSC 2008 Percentage= 87% FBISE
FINAL YEAR PROJECT
Design and fabrication of an Automated Guided Vehicle. (In Progress)
SEMESTER PROJECTS
Worked on programming of a Scientific Calculator using C++.
Worked on mathematical modeling of turbochargers used in automobiles.
Worked on a research project on water jet cutting machines.
Worked on design and fabrication of a working model of regenerative braking mechanism.
Worked on the PID Control simulations of a vehicle cruise.
TRAININGS/CONFERENCES
Member of NUST Automotive Group. Also participated Design, Build and Energize (National level
event) where award for the best fuel efficient vehicle was given to my team.
Attended LUMS Psi-Fi 2011 and participated in Gear-up (a car model fabrication) competition.
Attended ICAMS (International conference on advanced Modeling and Simulation) held at
CEME, NUST.
Attended training workshop on Pro-Engineers (machine designing software) held at CEME
NUST.
Participated in Sytec, a scientific event organized by NUST.
Attended a conference on environmental laws in Pakistan and the methods of improving the
environment held at Marriot Hotel, Islamabad.
Visited KSB pumps, Raastgaar Industries and Askari Cements for industrial exposure.
Worked as an Internee at National Development Complex and worked on different design projects
using SolidWorks and Pro Engineers.
SOFTWARES PROFICIENCY
Microsoft Visual C++
AutoCAD 2004
Pro-Engineer wildfire 4
Solid Works
Microsoft office 2007
Matlab
Ansys
Carsim
EXTRA-CURRICULAR ACTIVITIES
Captain of College cricket team.
Worked as an event head for EME Inertia 2013, a National level event.
Member of College Horse Riding Club.
Volunteered in Orphans Angels Gala organized by NUST Volunteer Club.
Member of the College Adventure Club, Sports and Adventure Society and Society for
promotion of Arts and Literature.
NAYAB SHIRAZ
Email : [email protected] Cell No. 92-3315309340
Address : H#315, St#16 Rehman Masjid Road, Ghauri Town Phase 1, Islamabad.
OBJECTIVE Seeking career opportunities at a technology oriented established organization.
ACADEMICS
LEVEL INSTITUTION MARKS/CGPA
B.E Mechanical Engineering COLLEGE OF EME NUST 3.75
F.Sc Pre-Engineering F.G.College for Women F-7/2 Islamabad 953/1100
Matriculation F.G.Girls.Model School F-7/2 Islamabad 776/850
INDUSTRY EXPERIENCE
Solved the problem of liquid hold up in oil pipelines, performed decision making based on economic evaluation of oil and gas
exploration projects and improved HVAC system of the head office building as an intern at OGDCL in production department.
Hands-on experience in manufacturing and assembly of pumps and valves at production facility of KSB pumps.
Participated in design and manufacturing of steering knuckles at construction plant of Rastgar group of industries.
On-site work experience of cement production and packing at Askari cement plant in Wah.
FINAL YEAR PROJECT Design and fabrication of vertical take-off and landing bicopter aircraft.
SEMESTER PROJECTS
Design and fabrication of bowling practice machine for cricket.
Roll, pitch and yaw control of VTOL bicopter using PID controller in MATLAB Simulink.
Fabrication of prototype vehicle employing Regenerative Braking Mechanism.
Modeling of Stratified Charge Engine on Solidworks, flame propagation in AutoDesk Maya and fuel efficiency on MATLAB.
Fabrication of screw jack and its 3D modelling on Solidworks.
Virtual piano beeper application in C++.
Wirelessly computer controlled car using parallel port interfacing in C++
Research report on the applications of the nano-materials in spacecrafts.
SOFTWARE SKILLS
Solidworks MATLAB C++ PSPICE ANSYS Pro-E AutoCAD MS Office PIPEPHASE AutoDesk MAYA
DISTINCTIONS
NUST merit scholarship in all semesters.
Scholarship from FBISE in SSC examination in 2008 and in MSSE in 2006.
Awarded scholarship from the President of Pakistan in 2004.
Among top 10 in NMTC (National Maths Talent Contest) in 2009 and attended training sessions at ASSMS GCU Lahore.
Won quiz competition held at IST during International Space week-2009.
1ST
prize in inter-colleges quiz competition 2007-2008 and 1st prize in debate contest in 2008.
Society Post Events and activities
ASME Deputy Director hot air balloon design, bridge building and egg drop contest.
NLC Executive body member Short story writing competition.
NVC Academics Wing Supervisor Fund raising campaign for earthquake victims, Scholarships and career advice sessions
SAS Event Manager Badminton, basketball, horse riding, trip to bhurban.
MANAGEMENT and LEADERSHIP SKILLS
Organized “Engineering Project Exhibition” in EME inertia 2013.
Visited different universities for promotions and registrations of EME inertia, convinced people and maximized the profit.
Organized events „‟Extreme Engineering Ideas‟‟ and musical concert in EME Olympiad 2010.
President of student Council in school.
Editor of college magazine.
Organized Independence day activities and played the role of Fatima Jinnah in a historical play in school.
CONFERENCES 1- Pakistan Composites show at Islamabad Hotel in Dec, 2012.
2-International Conference on Modelling and Simulation.
3-Shell Conference on Green Energy.
COMMUNITY SERVICE
Volunteered in Orphans Annual Gala “Angels on Earth” organized by Pakistan Bait-ul-Mal – March, 2012.
Volunteered in clean up drive of Rawal Dam- Jan2014.
Volunteered in organizing eye donation awareness campaign and seminar on first aid.
Volunteered in organizing workshop on spiritual cardiology.
_______________________________________________ Curriculum Vitae
Noroze Sikander Junaid Dani
[email protected] Phone: 051-2222561 Mobile: +92(344)-5509316 H. No. 298, Street 20, Sector E-11/4, Islamabad
Education: Student of BSc. Mechanical Engineering September 2010 to date. College of Electrical and Mechanical Engineering, National University of Sciences and
Technology (NUST-EME)
Rawalpindi.
GCE A Levels June 2010
GCE O Levels (Pre Engineering) June 2008, June 2009 Beaconhouse School System, Margalla Campus, Islamabad.
Mathematics Chemistry Physics Economics (AS Level)
8 A’s in 8 subjects
A* A* A* A
Achievements: -Received Gold Medal for straight A’s in both O’ and A’ levels. -Received a shield of honor for successfully organizing All-Pak Beaconhouse Model United
Nations (BMUN 2010) as Head of Registrations.
Current CGPA: 3.70 out of 4.00
Practical Experiences:
Internship at Schlumberger Oilfield Services (July 2013) - Worked in the Well Services Department. - Worked on the maintenance of the CPF unit and carried
out a number of experiments in the laboratory. - The final presentation was presented on the
reciprocating pumps present on the CPF. Internship at PTCL Headquarters (July – August 2012)
- Observed and studied the cooling and heating system of all the buildings in the headquarters and to help and inspect the installation of new machinery by an external
organisation.
- The system of the common building elevators was
explained and the cooling/heating plants inside the
headquarters were frequently visited.
Major Semester Projects: EME College, NUST, Rawalpindi.
Final Year Project:
- Design and Fabrication of a Multi-terrain mobile platform (mechanical spider).
- A work in progress, hopefully to be completed by the mid of May
7th semester:
- Designed and fabricated a manual tennis ball throwing mechanism. - Designed a PID controller for the guidance of a heat seeking homing missile .
5th semester: - Designed and manufactured a model of an Infinitely
Variable Transmission (IVT)
4th semester: - Designed an Internal Combustion Engine with Continuously Variable Valve Lift (CVVL) technology. A cam phasing
mechanism was also used to advance the timing at high RPM’s. -Designed and manufactured a screw jack
3rd semester: - Formulated a matrix calculator using C++ language
Computer Skills: Programming:
C/C++
Office: Word, Excel, PowerPoint Other Applications: PSPICE, AutoCad , Pro-E, MATLAB, Visual Studio
Extra Curricular Activities/Interests:
- Lead Guitarist of an Islamabad underground band “Resurrection”
https://www.facebook.com/Resurrection.pk
- Remained an active member of a sponsored Warcraft (DotA) team (Electronic gaming). Achieved 1st Position in UGX (gaming competition) held in GIKI and various other gaming competitions organized by schools; also achieved 3rd Position in the ESWC 2008 gaming competition held in Karachi; Runner up of FIFA 14 in EME Olympiad 2013.
- Head of Music Society, Beaconhouse Margalla Campus – 2010
- Hobbies include football (soccer), bodybuilding and fitness, electronic gaming etc.
Omer Sohail B.E. Mechanical Engineering Personal Information
Father’s Name: Sohail Manzoor Cell: +923334366443 CNIC: 35202-7178308-5 Address: Flat No. 11, Haleem plaza, Lytton Road Date of Birth: 28-03-1992 Lahore. E-mail: [email protected]
Career Objective
To climb the stairs of professional excellence through self-motivation & dedication by working in a challenging & professional environment so that I can play my role to achieve the goals of the organization.
Educational Background
2010 - 2014B.Sc., Mechanical Engineering, EME College, NUST, Pakistan.CGPA 2.51
2008 - 2010 HSSC, Pre-Engineering, BISE Lahore. A+/ 88.1%
2006 - 2008 SSC, Sciences, BISE Lahore. A+/ 91%
Practical Work Experience/ Projects
Internee at Nishaat Dying and Weaving Plant, Lahore.(August 2013 to September 2013) 1. Design, Fabrication &Installation of condensing economizer for PC Bhurban. (Final Year Project). 2. Design & Fabrication of conveyer Belt. 3. Design, Programming & Fabrication of Computer Controlled gun. 4. Design &Analysis of Hydrogen Internal Combustion Engine. 5. Design & Fabrication of Robot Base for NERC.
Internee at Millat Tractors, Lahore (July 2012) Familiarized myself different manufacturing processes and proposed a plan for cooling of Furnace area.
Leadership/ Management Skills
President of SAE Student Chapter, EME College, NUST.
Convener for EME Olympiad 2013.
Director HR in EME Olympiad 2013 and Deputy Director HR in EME Olympiad 2012.
Member at NUST Volunteers Club.
Member at ASME Student Chapter, EME College, NUST.
GS E-gaming at Sports and Adventure Club, EME College, NUST.
Technical Skills
Solid Works
Pro-E
MATLAB
AutoCAD
Miscellaneous: MS Office, Windows XP/98, Windows 7,Windows 8
Memberships/ Associations
ASME SAE NUST Volunteers Club
Govt. Central Model School, Scholarship Holder.
Punjab College of Science, Scholarship Holder.
NUST merit position Scholarship Holder.
Distinctions in many National as well as International Contests. This would be a good learning experience for me and I want to open more opportunities for myself in the future. I want to go through challenges, and achievements are my goal.
(Omer Sohail)
OVAIS AHMED BIN NAJEEB
House # 127, Street 38, I-9/4, Islamabad, Pakistan
Email: [email protected] Telephone: 9251-4444213 Mobile: 92300-8335773
OBJECTIVE
Looking for a challenging job position to gain experience and improve my skills as a professional and as an engineer while being a
cherished asset for the company.
ACADEMIC RECORD
LEVEL STATUS GRADE/GPA UNIVERSITY/INSTITUTION
BE (Mechanical)
BE(Mechanical)
2014
Spring semester
2013
CGPA = 3.63/4.00
(In Progress)
GPA=4.00/4.00
National University of Sciences and Technology(NUST)
University of North Texas, USA(UNT)
A Levels 2010 4 As Beaconhouse School System, A Levels Margalla Campus
O Levels 2008 8 As Beaconhouse School System, Boys Branch
INTERNSHIPS
1. Internee at the Automotive Department of NED University, Karachi
2. Internee at Al-Haj FAW Motors Private Limited
3. Internee at National Development Complex
RESEARCH/PROJECTS
1. Case study on UNT’s Wind Turbines installed at the Apogee Stadium (USA)
2. Karachi’s Energy problems and its proposed Sustainable Energy Solutions (USA)
3. Prototyping and Designing of CVVT( Continuous variable valve timing ) system
4. Designed and Manufactured a potato cutter and ball throwing machine
5. Final year Project of Designing, Analysis, Control and Manufacturing of a VTOL bicopter (In progress)
HONOURS and ACHIEVEMENTS
1. Recipient of the Global UGRAD Pakistan Scholarship by the US Department of State
2. 3rd
position in LUMS PsiFi, Science Olympiad held in December 2011
3. Gold Medalist in O and A levels
4. Outstanding Student of The Year 2003-2008 in Beaconhouse School
5. Scholarship Recipient from 2003-2010 in Beaconhouse School
6. President of the English Literary Society in 2010
SOFTWARES/PROGRAMMING LANGUAGES
1. AutoCad
2. Microsoft Visual C++
3. ProE
4. SolidWorks
5. MS Office
6. MATLAB
EXTRA-CURRICULAR ACTIVITIES 1. Participated and won singing, poetry, science and speech competitions
2. Enacted the role of Katrina in Shakespeare’s play “Taming of the Shrew”
In the Drama Festival 2005
3. Won a badminton tournament at UNT (USA)
4. Organized a Spelling Bee competition
5. Member of the Pakistan Student Association in UNT
6. Actively participated in Community Service by serving in Old Homes,
Tree Plantation, food festival and Denton Redbud Festival in USA and
NUST volunteer club.
7. Active Member of the US Pakistan Alumni Network
8. Part of the US Department Of State’s “Project Smile” initiative for Women in Rural areas.
HOBBIES and INTERESTS
1. Cricket, Badminton, Swimming, Horse Riding
2. Blogging, Watching Movies and Sports
Sufyan s\o Tariq Mahmood (Following is my current address but I can stay in Lahore during job period)
House#3 Cantt View Colony Gondal Saidpur Road Sialkot, Pakistan
Cell No: +92-321-7122484, Email: [email protected] - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
CAREER OBJECTIVE
I am seeking an environment which harbors advanced systems which would optimize my professional skills and where I can
polish my managerial skills and develop my career as a professional.
EDUCATION
2010-2014 National University of Sciences and Technology, College of E&ME, Peshawar Road Rawalpindi Pakistan
BE-Mechanical– CGPA 3.84 on a scale of 4 (8th semester in progress)
2008-2010 Govt. Murray College Sialkot –FSc (Pre-Engineering) 952/1100
2006-2008 Allama Iqbal Public High School Sialkot -Matriculation 762/850
EXPERIENCE
Internship at Attock Refinery Limited (Maintenance department and Design department)
(August 5, 2013 – September 16, 2013)
Projects at Freelancer (June, 2013 - present)
Assistant to Mr Ahmed Sohail - Engineering Consultant of multiple firms (February, 2013 - present)
RESEARCH PAPER PUBLICATONS
“Geometric Modeling of the Frequency of an Acoustic Detonation Pressure Wave in a Standard Spark Ignition Engine”
Applied Mechanics and Materials Vol. 392 (2013) pp 146-150 © (2013) Trans Tech Publications, Switzerland
doi:10.4028/www.scientific.net/AMM.392.146
“Scope of Suspension design incorporating the Mathematical model of camber gain” ICOMS (Air University)
PROJECTS
Design and fabrication of exoskeleton arm (final year project)
Proposal to Govt. “Benchmarking of the process industry of Pakistan” (Pakistan Strategy Support Program (PSSP) and
Federal Planning Commission’s Competitive Grants Program)
Fabrication of Hexapod(Six legged walker driven by motor)
Manufacturing and optimization of Eddy Current Braking System for given battery and number of turns of specific wire
RC car controlled via parallel port.
Analytical Report on “Fluid Mechanics application in marble industry”
TECHNICAL SKILLS
MS Excel, Word & PowerPoint
Solidworks, Pro-Engineer, Auto CAD
MATLAB
LEADERSHIP SKILLS
Strong team working and communication skills
Effective at time management and prioritizing tasks to meet deadlines
ACHIEVEMENTS &EXTRA CURRICULAR ACTIVITIES
Punjab Education Endowment Fund Scholarship for complete 4-Year University education
NUST scholarship
Won best research paper competition at ICOMS(Air University)
LAPTOP awarded under Punjab Government Youth Initiative Scheme
2nd
Position in Department Of Mechanical Engineering at E&ME NUST
JNSH(3rd
year appointment at College of E&ME, NUST to deal with disciplinary issues)
SNSH(Final year appointment at College of E&ME, NUST to deal with disciplinary issues)
Scored in the 100th percentile in MENSA IQ test
Member of Organizing team of E&ME Olympiad and E&ME Inertia 2013
Won REGIONAL MATHEMATICS QUIZ COMPETITION held at Leadership College Sialkot REFERENCES
References can be provided on demand.
MUHAMMAD SAAD ALI WARISHouse # 32 B4 Wapda Town,
Lahore.Contact Number: 03225027323Email: [email protected]
OBJECTIVE
To secure a job in a company where I can learn and also get ample opportunities to apply my technical and managerial skills acquired so far, benefit my colleagues as much as I can and gain from them experience that will help me in my future.
EDUCATIONAL RECORD
BE-Mechanical Engineering, National University of Science & Technology, E&ME College Rawalpindi Pakistan.
CGPA 3.34/4.00 (2010-2014)
F.Sc Pre-engineering, KIPS College, Johar Town Lahore.
86.45 % (2008-2010)
Matriculation, Army Public School, Sialkot Cantonment.
85.64 % (2004-2006)
WORK EXPERIENCE
Interned at National Engineering Services Pakistan (NESPAK) from July 2012 toAugust 2012.Studied the HVAC systems of Software Technology Park and PunjabForensic Science Agency and submitted the detailed report on these systems including the recommendations for improvement.
PROJECTS
Energy Audit of an automotive radiators manufacturing company.Designed and fabricated an off road vehicle for the BAJA SAE Korea.Designed and fabricated the Tubular Chassis for a single seater petrol car.Worked on the six stroke engine cycle, its designing, analysis, simulation and methods of improvements.Designed,modeled and simulated the Active Steering system.Programmed and designed the circuit to control the RC car via computer.Designed the android controlled electric switch system.
TECHNICAL SKILLS
Modeling and Simulation Software: AutoCAD, Pro Engineer Wildfire, Solid Works.Circuit Designing and Simulation: PSPICE.Programming language :C++.Microsoft Office :Excel, Power Point, Word.Excellent analytical and managerial skills.Numerical Computation Software: MATLAB.
ACADEMIC ACHIEVEMENTSGot NUST merit scholarship for academic excellence.Was honored by the Head of Department for outstanding achievement inacademics.KIPS College Merit Scholarship Holder.Stood 17 on the list of PIEAS entrance test.Stood 35 on the list of the GIKI entrance test.
EXTRACURRICULAR ACTIVITIES
Team manager of NUST Automotive Group. Director Operations at EME Inertia 2013. Organizer at EME Olympiad 2012. Member of EME Riding Club.
WORKSHOPS/CONFERENCES
Attended the International Energy Conference held at EME College NUST.Attended the conference on Advanced Modeling and Simulation held at NUST.Attended the workshop on Social Media held at Serena Hotel by the US Consulate.Attended the National Symposium on Peaceful Applications of Nuclear Technology held at NUST Islamabad..Attended the National Composite Show held at the Islamabad Hotel Islamabad. Attended the Industrial Energy Awareness Workshop held in Perl Continental Lahore.
House No: 164-D,Phase 1,DHA Lahore, Pakistan
+92-323-5093096;
Date of Birth: December 16, 1991
SALMAN RASHID
OBJECTIVE Obtain a position at your organization where I shall have the
opportunity of working under highly trained professionals,
to further polish my skills and add value to the program by
fulfilling operational requirements within the organization.
SKILLS &
ABILITIES
Familiar with
Microsoft Office
Visual C++
MatLAB
AutoCAD
ProEngineer
Language Proficiency: Urdu, English – fluent in reading,
writing and speaking
EXPERIENCE INTERN – FAUJI FERTILIZER COMPANY LIMITED, MIRPUR MATHELO
June to August 2013
Equipment Maintenance
INTERN – PAK ELEKTRON LIMITED (PEL), LAHORE
July to August 2012
Maintenance (Appliances Division)
EDUCATION COLLEGE OF E&ME, NATIONAL UNIVERSITY OF SCIENCES & TECHNOLOGY, RAWALPINDI,PAKISTAN
2010-2014 (expected)
BE Mechanical Engineering
CGPA: 3.45/4.00
Page 2
F.G. SIR SYED COLLEGE, RAWALPINDI, PAKISTAN
Higher Secondary School Certificate
F.Sc Pre-Engineering (FBISE)
974/1100 (88.54%)
ARMY PUBLIC SCHOOL & COLLEGE, RAWALPINDI, PAKISTAN
Secondary School Certificate
Matriculation – Science (FBISE)
758/850 (89.1%)
ACHIEVEMENTS
& AWARDS
NUST GPA scholarship award holder
All-Pakistan short story writing competition winner
F.G. Sir Syed College Declamation contest winner
Deputy Director HR NUST EME Olympiad 2012
Director HR NUST EME Olympiad 2013
Founding member/Director Registrations EME Inertia 2013 – Winner Best Director award
Organized various cleaning/community projects under college patronage
Active member of the NUST Volunteers Club
Runner up intra EME squash tournament; member of the college team
PROJECTS Final Year Project: Design and installation of a solar hybrid swimming pool heating system at PC Bhurban
Communication skills presentation on ‘The Big Bang Theory & The End of Universe in Islam’
Manufacturing of a stainless steel catapult with variable range as a ‘Manufacturing Processes’ project
Analysis and comparison of a 6-stroke engine with a standard 4-stroke engine
REFERENCES AVAILABLE ON REQUEST
SYED AFFAN ALI House # 100, Street 40, I-8/2, Islamabad
Email: [email protected] Telephone: 9251-9101111 Mobile: 92315-3050501 OBJECTIVE Looking forward to work in a dynamic environment with an organization where I could use my interpersonal skills and professional competencies for the help of society and organization’s growth and gain experience along the way.
ACADEMIC QUALIFICATION Level Status Grade/GPA Institution
BE(Mechanical) 2014 CGPA = 3.11/4.0 National University of Science and Technology HSSC 2010 Marks=903/1100 Federal Board of Intermediate and Secondary Education
SSC 2008 Marks= 703/850 Federal Board of Intermediate and Secondary Education
RESEACRCH EXPERIENCE Undergraduate Researcher: University of Maryland – College Park (Summer 2012) Developed a microfluidic system to filter magnetic nanoparticles from tissue scrapes. Developed a novel 3D design of a wheel chair in SolidWorks for patients undergone femur surgery. Assisted in testing and debugging an automated 3D imaging system. FINAL YEAR PROJECT
Vertical Take Off and Landing (VTOL) Unmanned Aerial Vehicle. (In Progress) SEMESTER PROJECTS Modeling (SolidWorks) and fabrication of a Screw Jack. A detailed research on ‘Stratified Charge Engine’ and its modeling in SolidWorks. Virtual Piano Beeper application using C++. Wirelessly computer controlled Car using parallel port interfacing in C++. Design and fabrication of ‘Regenerative Braking System’ prototype employing concepts of Electric Machines and
Automotives. CONFERENCES Organized “Composite Material Show”, - Islamabad Hotel, December 2012. Attended the “Youth Leadership Conference” organized by National Institute of Cultural Studies - October 2011. Attended the workshop on “Introduction to Environmental Laws” organized by the Society for enforcement of Rule
and Law in collaboration with Konrad-Adenauer-Stiftung- Marriot Hotel, Islamabad,October 2010. Attended the conference on “Project Citizen Pakistan” organized by Centre for Civic Education Pakistan -2005. HONOURS, ACHIEVEMENTS, and DISTINCTION Top 10 in ‘Mathelete’, an all Pakistan mathematics competition held in March 2012. Director of American Society of Mechanical Engineers (ASME) EME Chapter at CEME, NUST 2011-2013. 3rd position for LUMS PsiFi, a science Olympiad held in December 2010. Placed amongst the top 0.6% out of the 52,000 students who competed for the entrance exam at NUST (2010). University of Hertfordshire scholarship, 2010. Federal Board of Intermediate and Secondary Education’s performance based Scholarship, 2010. Stood amongst the top 5 students of graduating class in high school, 2010. Federal Directorate of Education’s scholarship, 2005. SOFTWARES USED AutoCad ProE SolidWorks
MATLAB Ansys MicrosimPspice 8.0
Maya 3D MS Office
PROGRAMMING LANGUAGES C++ Simulink
HTML M-File Programming
EXTRA-CURRICULAR ACTIVITIES Won Swimming Competition held at CEME, NUST, 2013. Volunteered in Orphans Annual Gala titled “Angels on Earth” organized by Pakistan Bait ul Mal - Mar. 2012. Member of organizing committee, and participant of EME Olympiad 2011 and 2012. 5 Gold, 2 Silver and 3 Bronze medals in various swimming competitions held at Islamabad Club from 2001- 2008. Captain of College Cricket and Table Tennis team. Member of the College Adventure Club, Sports and Adventure Society and Society for promotion of Arts and
Literature. Participated in various science competitions including Egg Drop, Hot Air Balloon, Reach the Sky etc.
Syed Ali Zaryab 112b/3 Railway Officers Colony, Walton Lahore Cannt, Pakistan
Phone: +92-322-4488125 Email: [email protected]
PERSONAL STATEMENT I am a capable and motivated mechanical engineer with excellent managerial and Interpersonal skills. I like to learn new things, take initiative and lead by example. Having an excellent academic background with participation in varied co-curricular activities, I am adaptable to any modern, challenging environment.
EDUCATIONAL RECORD 2010 –To Date
Bachelors of Mechanical Engineering, 8thsemester, College of Electrical and Mechanical Engineering National University of Science and Technology (NUST), Peshawar Road, Rawalpindi CGPA 3.27/4.0
2008-2010 F-Sc Pre Engineering, Superior College, Lahore 908/1100
PROFESSIONAL EXPERIENCE Teaching Assistant
Prof. Ali Anwar, Engineering Management Department, NUST, 2013 – To Date
Internship
Descon Engineering Limited, in Project Monitoring Department, July 2013-August 2013
PROJECTS Mathematical Modeling & Optimization of a solar cooker
Position Control of a robot using PID Controller
Designing, Modeling and Fabrication of a Reclining Wheel Chair
Feasibility study of Biogas Plant in CEME NUST
Modeling and stress analysis of a Wankel Engine
Development of a gaming console using C++
Designing, modeling and fabrication of a robot to compete in NERC 2012
Designing, modeling and fabrication of Model Sterling Engine
Designing and modeling of an Off Road Vehicle to compete Mini Baja 2013
TECHNICAL SKILLS Modeling and Simulation Software: Pro Engineer, Solid Works, AutoCAD & Ansys
Primavera 3.2
MATLAB Programming language :C++
ACADEMIC ACHIEVEMENTS
Best Delegate of Youth Tech Camp organized by the US Embassy 2012
Won Best Delegate award in CBMUN 2012
Obtained 1st position in Twin Cities Declamation Contest PIEAS 2011
Obtained 2nd position in All Pakistan Declamation Contest 2011
Represented Pakistan as a Youth Ambassador in USA through YES Exchange Program 2008 sponsored by the US government.
Represented Pakistan in the Sister City Leadership Summit 2008 in Denver, Colorado.
EXTRA CURRICULAR ACHIEVEMENTS
Attained 66th Position in MOL FRESHHH, and 3rd Place in Pakistan (team name SAW).
President NUST Volunteers Club 2013-2014
President Go Green Campaign 2013
Head Organizer of Summer Camp in Dar-ul-Shafqat Orphanage Lahore 2012
Head Organizer of Movie Night, Tree plantation, Community Clean up and several other community service projects 2009-2013
Hosted NERC 2011 and PUAN Declamation contest 2012
Represented Youth of Punjab to review the draft of the Provincial Youth Policy 2011
Member of American Society for Mechanical Engineers, EME Chapter 2011-2014
Director HR at Society of Automotive Engineering, EME Chapter 2012-2013
Received President Volunteer Service Award for completing 150 hrs of community service in USA 2008.
Taha Mahmood
Address: 175 Kashmir Block, Allama Iqbal Town Lahore. Contact : 0324-4549171
E-mail: [email protected]
CAREER OBJECTIVE:
To secure a position in the grooming and competitive environment of a company where I can enhance my skills and seek a promising future.
EDUCATION:
Degree: B.E Mechanical Engineering CGPA:3.37 2014
Institute: National University of Sciences & Technology (NUST), EME College, Rawalpindi.
Degree: F.Sc Pre-Engineering 89.6% 2010
Institute: Government College University(GCU), Lahore.
Degree: Matriculation (Science) 92.7% 2008
Institute: Divisional Public School Model Town, Lahore.
INTERNSHIPS:
Packages (From 01 July To 03 August 2013) Industrial performance department.
PITAC (From 01 June To 30 June 2012)
Plastic Mould Injection department.
Millat Tractors (From 01 August To 15 August 2012)
Assembly plant.
Study Projects:
Final year Project:
Design, analysis and fabrication of R/C submarine.
Semester Projects:
Fabrication of alpha type stirling engine.
Design and fabrication of crank charged crossbow.
Design of control system of a curtain mover.
Design and fabrication of continuously varying transmission.
Computer controlled gun.
Softwares:
Solidworks
Pro-Engineer
Autocad
Matlab
MS Office
Visual Basic C++ 6.0
Professional Skills and activities:
NUST Volunteers Club (NVC) Director Promotions
EME Olympiad 2011,2012, 2013 Event Organizer
Go Green Festival 2013 Director Promotions
HOBBIES:
Novel reading
E-gaming
Sight-seeing
Squash
Horse riding
Taha Mahmood
Address: 175 Kashmir Block, Allama Iqbal Town Lahore. Contact : 0324-4549171
E-mail: [email protected]
CAREER OBJECTIVE:
To secure a position in the grooming and competitive environment of UNILEVER where I can enhance my skills and seek a promising future.
EDUCATION:
Degree: B.E Mechanical Engineering CGPA:3.37 2014
Institute: National University of Sciences & Technology (NUST), EME College, Rawalpindi.
Degree: F.Sc Pre-Engineering 70.0% 2010
Institute: Government College University(GCU), Lahore.
Degree: Matriculation (Science) 83.71% 2008
Institute: Divisional Public School Model Town, Lahore.
INTERNSHIPS:
Packages (From 01 July To 03 August 2013) Industrial performance department.
PITAC (From 01 June To 30 June 2012)
Plastic Mould Injection department.
Millat Tractors (From 01 August To 15 August 2012)
Assembly plant.
Study Projects:
Final year Project:
Design, analysis and fabrication of R/C submarine.
Semester Projects:
Fabrication of alpha type stirling engine.
Design and fabrication of crank charged crossbow.
Design of control system of a curtain mover.
Design and fabrication of continuously varying transmission.
Computer controlled gun.
Softwares:
Solidworks
Pro-Engineer
Autocad
Matlab
MS Office
Visual Basic C++ 6.0
Professional Skills and activities:
NUST Volunteers Club (NVC) Director Promotions
EME Olympiad 2011,2012, 2013 Event Organizer
Go Green Festival 2013 Director Promotions
HOBBIES:
Novel reading
E-gaming
Sight-seeing
Squash
Horse riding
References available upon request.
Tehmas Bin Sattar
Mechanical Engineering (8th Semester)
NUST, College of EME
Rawalpindi-46000
0333-6069898
Father’s Name: Colonel® Abdus Sattar, SI(M)
Date Of Birth: December 15th 1991
Permanent Address: House# 293, Lane# 5, Askari 2, Multan Cantt
Objective
Seeking a Trainee Engineer position in a reputable firm, to compliment the theory
learned in Mechanical Engineering. Being a part of your firm will be ideal stepping
stone for my professional career.
EDUCATION
2010-2014 BE Mechanical Engineering.
CGPA: 2.77
NUST College of Electrical and Mechanical Engineering, Rawalpindi.
2008-2010 A Level’s.
FFC Grammar school & College, Sadiqabad
2005-2008 O Level’s.
APSACS, Bahawalpur
Honors and awards
Director Public Relations at College of E&ME.
Achieved silver medal from FFC Grammar School on academic basis.
Got 2nd position in Gujranwala region in Kangaroo Math Contest.
Worked on a car making project for Shell Eco Marathon, Malaysia.
Obtained first position in regional level quiz competition at APSACS Bahawalpur.
Won Swimming competition 2004 at Gujranwala Cantonment.
Skills and Interests
Computer: C++, Matlab, Pro-E, Auto-cad, Solid Works, MS office, Adobe
Photoshop, PSpice and Sony Vegas Pro.
Presentation: Developed ability to produce reports and presentations to a
professional standard.
Communication: Strong team working, leadership and communication skills.
Sports: Basket Ball, Squash & Swimming.
Relevant Work Experiences
Four weeks summer internship at Fauji Fertilizer Company (FFC).
Six weeks Summer Internship at Kashmir Sugar Mill, Shorkot, District Jhang.
Successfully converted a gasoline engine into compressed air engine.
Worked on various projects including development of a new type of engine called
Piston Less Engine.
Industrial exposure at KSB Pumps & Rastgar.
Attended labs such as Automotive, Thermofluid & Steam Power Generation lab.
Other Work Experiences
Worked as organizer at many mega events like EME Olympiad 2011.
As a hobby, I researched on many new feasible business concepts.
Worked in a short film named “Point Blank 2010” as a director & actor.
Working on a new power generation techniques as a final year project.
Mian Muhammad Umair Jamil Flat 5 , Block 1-B , Gali 30 , Street 2 , I-8/1 , Islamabad
Phone 0092-51-4433044 CELL 0092-331-5486372 [email protected]
A Mechanical Engineering student who can handle multiple, complex activities simultaneously. Additionally can improve
planning and execution by creating new solutions and techniques. Able to design, analyze, simulate and manufacture parts
and assemblies. Able to understand new information and convey it to others in an understandable manner. A good team
player who can bring out the best from the whole team.
Degree / certificate Major subject Degree awarding institute Year CGPA/Marks O’Levels Sciences Cambridge University 2008 83%
Higher Secondary
School Certificate
(HSSC)
Pre-Engineering Federal Board of Intermediate and
Secondary Education
2010 77%
Bachelors of
Engineering
Mechanical Engineering National University of Sciences and
technology
2010 2.91 on a scale
of 4
(7 semesters)
PROFICIENT IN THE FOLLOWING SOFTWARE
Microsoft Office
MATLAB
Solidworks
Visual C++ 6.0
ANSYS
Solid Edge
ProE / Creo
AutoCAD
LANGUAGES
Fluent in English, Urdu, Punjabi and reasonable speech skills in Persian.
Achieved a Band of 7.5 in IELTS exam.
ACHIEVEMENTS
Participated in Shell Eco marathon Malaysia representing Pakistan and NUST by building a fuel efficient vehicle
within the design limitations and obtained 8th position
Won the Mini Shell Eco Marathon Pakistan held in College of Electrical and Mechanical Engineering,
Rawalpindi.
Places in the top 0.25% students among the 52,000 individuals who took the NUST entry test.
PROJECTS
Designed and modeled a CVVL ( continuously variable valve lift ) mechanism for I.C. Engines semester project
Matrix calculator application using C++
Designed and modeled a four wheel steering system for Automotive Technology course
Designed and fabricated a planetary gearbox for Design of Machines course
Design, Analysis and fabrication of Multi Terrain Mobile Platform system using Klann’s Mechanism as the Final
year Project.
EXPERIENCE
Performed duties as a volunteer in EME Olympiad 2010
Organized technical events in EME Olympiad 2011
Performed the duty of Technical events' organizer and Event Head of "Fly High" simultaneously in EME inertia
2013
Performed duties as the event head of “Minute to Win It" in EME Olympiad 2014
Umair Khalid
About Me
Contact Information: Email: [email protected] Telephone: +9203475032058 Address: 58, Street 2, Ali Town, Adiala Road, Rawalpindi
Strengths: o Adaptive o Responsible o Result Oriented o Dynamic o Team Player
Skills: o Strong Interpersonal And Communication
Skills o Software Skills : SolidWorks, Creo
Elements, Abaqus, Ansys, Labview, Comsol Multiphysics, Simulink
o Programming Skills: C++, Python, Matlab, CNC programming (G Code and APT)
Career Objective:
To work in the Industrial sector and contribute by applying my knowledge to help solve real time engineering problems, honing my skills and capabilities in the process.
Profile Summary: Education:
2010-2014 BE Mechanical Engineering, CEME, NUST CGPA 3.29/4.00 2008-2010 HSSC from FBISE Islamabad 974/1100 (Academic Distinction) 2006-2008 SSC from FBISE Islamabad 757/850 (Academic Distinction)
Projects and Research Undertaken:
Final Year Project: Design and Fabrication of Quadruped Mechanical Spider using Composite Materials Journal Research Article: Geometric Modeling of the Frequency of an Acoustic Detonation Pressure Wave in a Standard Spark Ignition Engine (Journal of Applied Mechanics and Materials Vol. 392 (2013)) Design and Manufacturing of an off road vehicle for 2013 SAE MINI BAJA Competition, Korea Design and Manufacturing urban concept car body for Shell Eco Marathon 2013, Malaysia Design and Manufacturing of Eddy currents disk braking system, Jan. 2013 Design and Manufacturing of Mechanical Octopod, June 2012
Resourceful - Synergetic - Humanitarian
U m e r S h e r d i l P a r a c h a
Dk 473/8, Service Road, Dhoke
Kashmerian, Rawalpindi.
[email protected] Home: +92-51-4915067 Cell: + 92-333 5166806
CAREER STATEMENT
I am a highly motivated and dedicated individual with a keen eye for detail. I am looking for an opportunity to prove my worth
and advance my career as far as possible. Being a part of your prestigious organization will be an ideal stepping stone for my
professional career.
EDUCATION
B.E Mechanical Engineering (8th
Semester) 2010-2014 NUST College of Electrical and Mechanical Engineering, CGPA: 3.73/4.00
F.Sc Pre-engineering 2008-2010 F.G. Sir Syed College, The Mall, Rawalpindi Cantt. Marks: 89.82%
Matriculation (Science Group) 2006-2008
Siddeeq Public School, 6th Road, Rawalpindi. Marks: 91.2%
PROFESSIONAL EXPERIENCE
HEAVY MECHANICAL COMPLEX (HMC)
TAXILA, RAWALPINDI FROM: 25-06-2012 TO: 24-07-2012
During my internship period, I worked at pattern shop, Production planning and control, NDT Laboratory,
Machine Shop, Fabrication Shop, Material testing lab, Forging Shop, Steel Foundry and Quality Control.
Academics
SKILLS AND ACCOMPLISHMENTS
Obtained Merit Scholarship on GPA basis in all semesters of engineering.
Obtained Merit scholarship from FBISE & RBISE.
Management Skills
Director of Press and Operations Branch of EME INERTIA 2013.
Event head of "A Minute to Win it" in EME Olympiad 2013.
Technical Skills
Pro-Engineer
Auto Cad
Microsoft Visual Studio C++
Microsoft Visual C #
Abaqus
Mat lab
PSPICE
Microsoft Office
Miscellaneous
Devoted and hardworking. Effective managerial, presentational and leadership skills. Quick learner and planner. Creative and extremely persistent.
SENIOR YEAR PROJECT
I am developing software for the analysis of composite beams. The implementation will be done on Microsoft Visual C #.net and
the FEA analysis will be done on Abaqus. A lab scale testing equipment will be fabricated to validate the results of the software. If
required goals are achieved within time, the analysis version of the software will be extended to a design version and using our
software a composite beam ladder will be fabricated for Prime Fiber Glass, Pakistan.
SEMESTER PROJECTS
Development of missile roll controller by PID implementation
Fabrication of a homemade Sterling Engine. Research work on laser ignition in vehicles and its comparison to spark ignition.
Fabrication of transformer winding machine.
Development of an nth order matrix calculator in Microsoft Visual Studio C++.
INTEREST AND HOBBIES Watching T.V shows and Movies
MUHAMMAD WAQAS AKRAM House no 98, Sector 8h, POF Wah Cantt, City: Rawalpindi, Punjab Pakistan.
Email: [email protected] Mobile: +923125613322
Career Objective
Highly motivated EME College NUST student seeking a challenging position in a dynamic company and to
work in a friendly and congenial environment where I can utilize my technical and managerial skills in an
efficient manner.
Education
BE Mechanical HSSC SSC College Of EME, NUST FBISE FBISE
CGPA: 3.25(Seven Semesters) Percentage: 82.3% Percentage: 84%
Skills & Projects
Design and fabrication of an Automated guided vehicle for material handling in industries (Final
year Project).
Able to prioritize individual workloads according to deadlines.
Confident attitude with a proactive approach to work.
Ability to manage multiple tasks simultaneously.
Flexible and Punctual and Capable enough to work well under pressure.
Doing research on driverless vehicles and industry automation.
Studied and concluded results of drag on moving surfaces through fluids.
Able to understand use of hydraulics in industrial processes.
Computer Aided Engineering.
Designed control strategy of a dynamic valve via PID implementation.
Technical Softwares
Microsoft Visual c++.
Creo.
AutoCAD .
Matlab.
Microsoft Office.
Ansys.
Industrial Experience
Internee in Pakistan Ordnance Factories, Wah cantt. June 2012 – July 2012 (1 month)
Worked as an intern, under the supervision of several professional engineers my responsibilities were
drafting, designing, performing research and visiting shops of different factories.
Attended visits to KSB Pumps, Askari Cements and Rastgar Industries organized by College to gain
industrial exposure.
Co-Curricular Activities
Volunteered at EME Olympiad event.
6 to 8 hours of community work per week.
Worked as Promotion director for EME Inertia.
Volunteered In ‘Taray Zameen Par.’ organized by Pakistan Bait-ul-Maal.
Participated in the survey on reasons of backbone problems.
Participated in aeroplane design Sytek NUST.
Currently working as an Ambassador for procom.net NUCES.
ZAHEER-UD-DIN M.BABAR Mohalla Karamabad
Chiniot, Pakistan
Tel# +92-303-8137912
[email protected] Aim:
To secure a job in company where I can learn and also get ample opportunities to apply my
technical and managerial skills acquired so far and gain experience that will help me in my future.
Education:
BE (Mechanical Engineering)
(2010-2014)
National University of Science &
Technology, E&ME College
Rawalpindi, Pakistan.
CGPA 2.76/4.00
(Till 7th semester)
F.Sc (Pre-engineering)
(2008-2010)
Masoomeen College for Advance
Sciences Chiniot, Pakistan.
965/1100
Matriculation
(2006-2008)
Msaoomeen Foundation H/S
School Chiniot, Pakistan.
742/850
Semester Projects:
Senior Year Project: Design and fabrication of tube and fin type condensing economizer to
be installed at PC BHURBAN for waste heat recovery.
Design and fabrication of COMPUTER CONTROLLED GUN using C++.
Fabrication of the CONVEYER BELT using different techniques of manufacturing processes.
Detailed study on HYDROGEN INTERNAL COMBUSTION ENGINE.
Detailed study on ACTIVE SREERING SYSTEM.
Design of controller for solar tracker.
Design and fabrication of crank charged cross bow.
Work experience:
08 weeks internship at KOT ADU POWER COMPANY (KAPCO) from 01/07/2013 to
30/08/2013.
Managerial Experience:
Arranged various events and competitions as organizer in EME OLYMPIAD 2011.
Worked as a active member of the HR team in EME OLYMPIAD 2012.
Worked as a DIRECTOR SOCIAL EVENTS in EME INERTIA 2013.
Worked for the blood donation drive organized by the NUST VOLUNTEERS CLUB.
Worked for the GO GREEN festival organized by the NUST VOLUNTEERS CLUB.
Software Skills:
PRO-E, Solid works, C++, AutoCAD, MATLAB, MS Office (Word, Excel, PowerPoint).
Achievements:
Awarded merit scholarship in matriculation by Masoomeen Foundation H/S Chiniot.
Awarded merit scholarship in intermediate by Masoomeen College for Advance Sciences
Chiniot.
Activities and interests:
Playing table tennis, badminton, squash and cricket.
Having interest for the turbo machinery, automobiles and power plant technology.
ZAIN HASSAN Address: H#77/5, Sultan Colony, Iqbal Rd,
Supply, Abbottabad
Contact: +923315741679
Email: [email protected]
Objective
Seeking a job in a company where I can learn and gain experience that will help me in future, also get ample opportunities to apply my technical and managerial skills acquired so far.
Education
College of Electrical and Mechanical Engineering, NUST Bachelor of Mechanical Engineering (BE), CGPA 3.64,2010-2014 (in progress)
Army Burn Hall College – Abbottabad F. Sc. (Pre-engineering), 80.45%, 2008-2010
Army Burn Hall College – Abbottabad Matric,80.00%, 2006-2008
Internship
Supply Chain at Rahim Yar Khan Factory, Unilever Ltd. Pakistan
Final Year Project
Design and development of a 5 DOF Articulated Industrial Robotic Arm for Spot Welding
Semester Projects
PID control of a DC Motor, Control Systems’ Project
Autonomous Wall Tracking Robot, for National Engineering Robotics Contest
Analysis of Hydrogen Internal Combustion Engine, IC engines’ project
o Modeling and development of Toroidal Continuously Varying Transmission, Automotive Technology project
Computer Controlled Gun, C++ project
Achievements
Participant of Math training program arranged by STEM careers project (NMTC-6)
Merit based full semester scholarship
Managerial experience/ co-curricular and extra co-curricular
Vice President EME eGaming Club (Sports and Adventure Society)
Director Environmental Club (NUST Volunteers Club)
Event head E-GAMING in EME Olympiad 2011 and 2012
Director Social Events, EME Inertia 2013
Director Human Resource Management, Go Green Campaign
Softwares
Web Development (Basic HTML and CSS Style Sheets)
Programming in Visual Basic C++ 2006
MATLAB and Simulink
ProEngineer 4.0
AutoCAD 2004
SolidWorks 2013
Office
Adobe Photoshop CS5
Hobbies/ Interests
Horse Riding
Squash
Novel Reading
eGaming
Trekking
ZOYA FAROOQ Mailing Address: House # 9, Block C, Peoples Colony No 1, Faisalabad, Punjab, Pakistan.
[email protected] Personal Phone: 92 324 7732977 Residence Phone: 92 41 8559266
PROFILE:
A motivated individual with multiple proficiencies, aiming to receive a challenging yet full-of-
learning working experience.
EDUCATION:
BE Mechanical Engineering College of EME (NUST)
Rawalpindi 2010-2014 CGPA 3.1/4.00
FSc (Pre-engineering) Punjab College for Women
Faisalabad 2008-2010
925/1100 (84.09%)
Matriculation Divisional Public School
Faisalabad 2006-2008
785/850
(92.35%)
DISTINCTIONS:
Got a Gold Medal for topping my school in board examinations.
Have been winning scholarships in primary (from Faisalabad Board) and matriculation (from school & college both) examinations.
Got GPA based scholarship in the university.
DISTINCTIVE LEARNING:
Completed a successful 1-month course for English writing/speaking skills.
Took a workshop for learning MS Excel.
SEMESTER PROJECTS:
Internal Combustion Engines: Modeling and comparison of three pistons with different
type of profiles on their heads, using stress/thermal analyses in PRO E. Manufacturing Processes: Design and fabrication of an alpha type stirling engine.
Automobile Technology: Study and calculations of different mechanisms taking place in
a double-acting shock absorber. Design of Machine Elements: Design and fabrication of an exoskeleton.
Control Systems: Design of a control system for an automatic garage gate opener.
INTERNSHIP:
Successfully completed a 6-week internship at Shahbaz Garments (pvt) Ltd, providing
assistance to the managing engineer there.
TECHNICAL EXPERTISE:
Microsoft Word
Microsoft Excel Microsoft Power point
Auto CAD Pro Engineer
C++
MATLAB
MANAGEMENT/ LEADERSHIP EXPERIENCE:
Director Registrations at EME Olympiad 2013. Smoothly managed registrations of around
2100+ participants to successfully organize largest twin-cities festival with 47 events. Director Registrations at Go Green Campaign 2013 – A three day event organized to
develop environmental awareness through 10 different competitions and a National Green Energy Symposium.
Deputy Director HR – ASME EME (Student Chapter)