about this manual - fujitsu this manual abbreviations the ... eth. ctrl 1000-base-t cu lp ... hyper...

PRIMERGY RX200 S2 Configuration Sheets

About this manual

� Abbreviations

The following expressions and abbreviations are used to describe the product names used in this manual.

Microsoft, Windows, MS, Windows Server are registered trademarks of the Microsoft Corporation in the USA and other countries. Intel and Intel are registered trademarks of the Intel Corporation and affiliated companies in the United States and/or other countries.All other hardware and software names used are trademarks or registered trademarks of their respective manufacturers. Other product names are copyrights of their respective manufacturers.

All Rights Reserved, Copyright© FUJITSU LIMITED 2005

A Configuration Sheet

Use this form to record the hardware configuration and various settings of your server.

B Design Sheet

Use this form to record the software settings.

C Accident Sheet

Use this form to record any failures that occur in your server.

Product names Expressions and abbreviations

PRIMERGY RX200 S2 This server, or server

Microsoft® Windows Server™ 2003, Standard Edition Windows Server 2003, Standard Edition or Windows 2003

Microsoft® Windows Server™ 2003, Enterprise Edition Windows Server 2003, Enterprise Edition or Windows 2003

Microsoft® Windows® 2000 Server Windows 2000 Server or Windows 2000

Microsoft® Windows® 2000 Advanced Server Windows 2000 Advanced Server or Windows 2000

1

2

Contents


A.1 Hardware Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

A.2 BIOS Setup Utility Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

A.3 SCSI Setup Utility Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

A.4 System Resource Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

A.5 RAID Design Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

B Design Sheet

B.1 RAID Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

B.2 Disk Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

B.3 OS Wizard (Windows 2003 Install Wizard) . . . . . . . . . . . . . . . . . . . . . . . . 15

B.4 OS Wizard (Windows 2000 Install Wizard) . . . . . . . . . . . . . . . . . . . . . . . . 20

B.5 Application Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

C Accident Sheet

A.1 Hardware Configuration


Use this form to record the hardware configuration and various settings of your

server.

Fill-in (or mark in some way) the checkboxes (�) appropriate for your server.

A.1 Hardware Configuration

� The internal CD-ROM drive unit

� The internal hard disk units

� CPU

� Memory

installed position Product ID

CD-ROM drive bay ❑ CD-ROM ATAPI

10,000rpm 15,000rpm

Bay 1 ❑ 73.4GB ❑ 146.8GB ❑ 300GB ❑ 73.4GB

Bay 2 ❑ 73.4GB ❑ 146.8GB ❑ 300GB ❑ 73.4GB

Installed

position

Installation internal hard disk units

Installation CPU Number

❑ Processor Xeon 3.0GHz / 2MB



* One CPU is installed.

❑ 1(*) ❑ 2

Installation slot Installation memory

Memory slot A1(*) ❍512MB ❑ 1GB ❑ 2GB

Memory slot B1(*) ❍512MB ❑ 1GB ❑ 2GB

Memory slot A2 ❑ 512MB ❑ 1GB ❑ 2GB

Memory slot B2 ❑ 512MB ❑ 1GB ❑ 2GB





* 512MB is installed in memory slot A1/B1 for all models

(except when custom made service is used).

3

4


� Expansion cards

1 2

RAID Ctrl 2-Channel 128MB w/BBU (PG-142E3) ❑ -

IB HCA Card (PG-HSC101) ❑ -

Eth. Ctrl 1000-BASE-T Cu (PG-1852) ❑ -

Eth. Ctrl 2 x 1000-BASE-T Cu (PG-1862) ❑ -

Fibre Channel Controller (PG-FC106) ❑ -

Eth. Ctrl 1000-BASE-SX Fibre LC lp (PG-1882L) ❑ ❑

Eth. Ctrl 1000-BASE-T Cu lp (PG-1892L) ❑ ❑

SCSI Ctrl U160 lp (PG-130L) ❑ ❑

Remote Service Board (PG-RSB103L) ❑ ❑

-: indicates that this item cannot be installed.

PCI slotExpansion card (Product ID)

A.2 BIOS Setup Utility Parameters


The marks used in each menu indicate: ❑: Parameters ❍ : Settings at time of purchase ♦: Unchangeable settings

� Main menu

Setting

Enter current t ime

Enter current date

❑ Disabled ♦1.44/1.25 MB 3 1/2"

[Enter]

♦Auto ❑ None ❑ CD-ROM ❑ IDE Removable

❑ Other ATAPI ❑ USER ❑ ATAPI Removable

Disabled (only displayed and unchangeable)

Disabled (only displayed and unchangeable)

FPIO4/DMA2 (only displayed and unchangeable)

❑ Disabled ♦Enabled

Mode2 (only displayed and unchangeable)

[Enter]


❑ Disabled ❍Enabled

♦Disabled ❑ Enabled





❑ CD-ROM Drive

❑ Removable Devices

❑ Hard Drive

❑ LSI MPI Boot Support

❑ IBA GE Slot 0330 v1220

❑ IBA GE Slot 0331 v1220

Diskette ❑ Standard

Hard Drive ❑ #50 ID00 LUN0 FUJITSU


Display available base memory size up to 1MB

Display memory size of 1MB or more

Base Memory

Primary Master (Standard CD-ROM)

Boot Options

32 Bit I/O

Type

Transfers Mode

LBA Translation

PIO Mode

Ultra DMA Mode

Extended Memory

POST Errors

Keyboard Check

SM Error Halt

Quick Boot

Quiet Boot

Memory Testing

MultiBoot for HDs

Boot Menu

Boot Sequence

Diskette A

Parameters

System Time

System Date

5

6


� Advanced menu

(continued)

Setting

[Enter]

❑Disabled ❑Enabled ❍Auto

❍System ❑BMC ❑Shared

♦ Local ❑Remote ❑Remote Once

❑Disabled ❍Enabled

❑Disabled ❑Enabled ❍Auto Detect

[Enter]

[Enter]

❑Disabled ♦ Enabled

Option ROM Scan ❍Disabled ❑Enabled

Latency Timer ❑Default ❑0020h ♦ 0040h ❑0060h ❑0080h ❑00A0h ❑00C0h ❑00E0h



[Enter]



❑Default ❑0020h ♦ 0040h ❑0060h ❑0080h ❑00A0h ❑00C0h ❑00E0h

[Enter]

❑Disabled ♦ Auto ❑ IRQ 3 ❑ IRQ 4 ❑ IRQ 5 ❑ IRQ 9 ❑ IRQ 10

❑ IRQ 11 ❑ IRQ 15

[Enter]





[Enter]

[Enter]




♦ Disabled ❑Enabled



❑Standard ♦ Enhanced

♦ Standard ❑Enhanced






Top of Base Memory

♦ Disabled ❑Sparing ❑Mirroring

PCI Device, Embedded Ethernet 1 (LANCN2)

NX Memory Protection

USB 2.0 Host Controller

Advanced System Configuration

Device

Option ROM Scan

Latency Timer

PCI Device, Embedded LSI SCSI 1020

Compatible FPU Code

Ethernet on Board

CPU Thermal Management

CPU Halt Mode (C1E)

PCI Slot 2 Configuration

CPU Mismatch Detection

Hyper Threading

CPU Settings

PCI Device, Embedded Ethernet 2 (LANCN1)

PCI IRQ Configuration

PCI Slots Configuration

BIOS Work Space Location

Memory Redundancy

Split Lock operations

Adjacent Sector P refetch

Enhanced SpeedStep

USB 1.1 Host Controller

USB BIOS Legacy Support

Peripheral Configuration

Serial

Floppy Type

PCI Configuration

Diskette Controller

Mouse Controller

Serial Multiplexer

Parameters

Fast String operations

Ethernet on Board

PCI Slot 1 Configuration

PCI IRQ Line 0/VGA


� Security menu

Setting

[Enter]


❍Off ❑On

Enter the time


❑Always OFF ❍Previous State ❑Always ON

❑Yes ❍No


❑1.1 ♦ 1.4

❑Other ♦ DOS

Parameters

Power On/Off

Multiprocessor Specification

Large Disk Access Mode

Power On Source

LAN

Resume On Times

Resume Time

Reset Configuration Data

Secured Setup Configurations

Power Failure Recovery

Remote

Parameters Setting

Setup Password Displays the existence or nonexistence of a password

System Password Displays the existence or nonexistence of a password

Set Setup Password Set Setup password

Set System Password Set System password

Setup Password Lock ❍Standard ❑Extended

System Password Mode System

SETUP prompt ❑Disabled ❍Enabled

Virus Warning ♦ Disabled ❑Enabled

System Load ❍Standard ❑Diskette/CDROM Lock

Diskette Write ❑Disabled ❍Enabled

Flash Write ❑Disabled ❍Enabled

7

8


� Server menu

Setting

❍Disabled ❑Enabled

Mode ❍Continue ❑Reset ❑Power Cycle

Timeout value ❍0 ❑0-100 ( )

❍2 ❑1-30 ( )

♦ 5 ❑0-15 ( )

❍3 ❑0-7 ( )

♦ Disabled ❑Remote Image Disk ❑LAN




❍5 ❑0-31 ( )

[Enter]

IPMI Specification Version Display IPMI Specification version

BMC Firmware Display BMC Firmware version

Clear System Event Log ❍Disabled ❑Enabled

Event Log Full Mode ❍Overwrite ❑Maintain

Existing Event Log number Display number of recorded logs

Remaining Event Log number Display number of remained recordable logs

System Event Log Display contents of the system event log

System Event Log (list mode) Display contents of the system event log in list mode

Realtime Sensor Data Display sensor data including temperature and voltage

[Enter]

CPU 0 Status ❑Failed ❑Disabled ❍Enabled

CPU 1 Status ❑Failed ❑Disabled ❍Enabled

[Enter]

DIMM A1 ❑Failed ❑Disabled ❍Enabled




DIMM B1 ❑Failed ❑Disabled ❍Enabled




[Enter]

Local IP Address Enter IP address

Subnet Mask Enter subnet mask

Gateway Address Enter gateway address

User ID 1 Password Not available for this server

[Enter]

Console Redirection Port ❍Disabled ❑Enabled

Port Serial

Media Type ❍Serial ❑LAN

Console connection ♦ Direct ❑Via modem

Baud Rate ❑300 ❑1200 ❑2400 ❍9600 ❑19.2K ❑38.4K ❑57.6K ❑115.2K

Protocol ❑VT100 ❑VT100, 8bit ❑PC-ANSI, 7bit ❑PC ANSI ❍VT100+ ❑VT-UTF8

Flow Control ❍None ❑XON/XOFF ❑CTS/RTS

Mode ❑Standard ❍Enhanced

LAN Settings

Clear Screen Delay (sec)

Memory Status

Console Redirection

Memory Scrub

Power Cycle Delay

IPMI

Parameters

CPU Status

ASR&R Boot Delay (min)

Boot Retry Counter

Diagnostic System

O/S Boot Timeout

BIOS runtime logging

Critical Temperature Monitoring

A.3 SCSI Setup Utility Parameters

A.3 SCSI Setup Utility Parameters

The marks used in each menu indicate:

❑: Parameters ❍ : Settings at time of purchase ♦: Unchangeable settings

� Boot Adapter List menu

� Global Properties menu

� Adapter Properties menu

� Device Properties Submenu

Setting

♦ 0

❍ON ❑OFFNext Boot

Boot Order

Parameters

Setting

❑No ♦ Yes

♦ Verbose ❑Terse

♦ Supported ❑All

❍Color ❑Monochrome

♦ Hook Interrupt, the Default ❑Bypass Interrupt hook

Pause When Boot Alert Displayed

Parameters

Boot Information Display Mode

Negotiate with devices

Video Mode

Support Interrupt

Setting

♦ 7 ❑0-15

♦ Low to High (0..Max) ❑High to Low(0..Max)

♦ None ❑Boot Drive Only ❑With Media Installed

♦ SCSI P lug and P lay Mupping

❑Alternate CHS Mapping

♦ 2 ❑1-15

♦ No ❑Yes

♦ Auto ❑off

Secondary Cluster Server

Termination Control

Host SCSI ID

Parameters

SCSI Bus Scan Order

Removable Media Support

CHS Mapping

Spinup Delay (Secs)

Setting

Not available for this server

❍160 ❑80 ❑40 ❑20 ❑10 ❑5 ❑0

Display maximum transfer speed supported by host adapter

♦ 16 ❑8

❍Yes ❑No

♦ Yes ❑No

♦ On ❑OFF

♦ 10

♦ On ❑OFF

MT/Sec

MB/Sec

Data Width

Scan ID

Restore Defaults

Parameters

Scan LUNS >0

Disconnect

SCSI Time out

Queue Tags

9

1


� RAID Properties Submenu

Setting

❑Yes (Array type/ Linux array type)

❑No (Other than Array type/Linux array type)

Not available for this server

Display hard disk status during disk array configuration

Display hard disk capacity

Status

Size(MB)

Hot Spare

Array Disk?

Parameters

0

A.4 System Resource Chart

A.4 System Resource Chart

The following charts list the I/O port addresses which can be selected for each expansion card.

� I/O port addresses

| | | | | | | | | | | | | | | | | | | | | | | |

Serial port | | | | | | | | | | | | | | | | | | | | | | | | BIOS setup

* indicate the I/O port address space that can be selected in the expansion card.

indicates that some or all of the 16 bytes that follow the marker address may be used

( space selected for default)

indicates that some or all of the 32 bytes that follow the marker address may be used

( space selected for default)

280 2C0100 140 180 1C0 400Product nameI/O port address (h)

Setup method300 340 380 3C0200 240

11

1


A.5 RAID Design Sheet

� Logical drive information

RAID

levelCapacity

1

1

1

Physical drive (CH=0 (fixed)

73.4GB (CH=0) ID= 0, 1,

(CH=0) ID= 0, 1,

(CH=0) ID= 0, 1,

2

B.1 RAID Wizard

B Design Sheet

When setting up the server using ServerStart, set the default values in advance to

ensure setup is performed smoothly.

B.1 RAID Wizard

Setting

❑ No RAID ❑ Automatic ❑ Manual

❑ Use existing array

RAID Controller ❑ Onboard SCSI array controller

Controller Number (Default - 0)

RAID Level ❑ RAID1

Number of Disks Number:

For manual and

auto settingExisting RAID Array ❑ Delete

For manual

setting

Configuration mode

For manual and

auto setting

Parameters

13

1

B Design Sheet

B.2 Disk Wizard

Parameters Setting

Controller Type ❑ RAID

Disk Number (Default - 0)

File System ❑ NTFS ❑ FAT

Quick Format ❑ Yes ❑ No

Label (Default - SYSTEM)

Partit ion Size ❑ Auto setting ❑ MB

Partit ion Usage ❑ BOOT ❑ OS ❑ DATA


Quick Format ❑ Execute ❑ Do not execute

Label (Default - DATA)













Erase all existing partit ions on all displayed

disks❑ Delete

Make copies when installing multiple disks or more sheets are needed.

4

B.3 OS Wizard (Windows 2003 Install Wizard)


(continued)

Setting

❑ Windows Server 2003, Standard Edition

❑ Windows Server 2003, Enterprise Edition

❑ per Seat

❑ per Server

(Only when concurrent users are selected)

❑ a work group ❑ a domain

(Default - MYUSERGROUP)

❑ Install Operating System from Local CD

❑ Install Operating System from Remote Server

(Default -(GMT+01:00) Amsterdam, Berlin,

Bern, Rome, Stockholm, Vienna)

❑ Use Default ❑ Drive Letter

❑C: ❑ D: ❑ E: ❑ F: ❑ G: ❑ H: ❑ I: ❑ J: ❑K: ❑L: ❑ M: ❑ N:

❑O: ❑P: ❑ Q: ❑ R: ❑ S: ❑ T: ❑ U: ❑ V: ❑W: ❑ X: ❑ Y: ❑ Z:

❑ Use default ❑ Prompt User

❑ Specify now

(Default - \winnt)

❑ - - - -

❑ 640 * 480 ❑ 800 * 600 ❑ 1024 * 768

❑ 1156 * 864 ❑ 1280 * 1024 ❑ 1600 * 1200

❑ 60 ❑ 70 ❑ 72 ❑ 75 ❑ 80 ❑ 85 ❑ 100

❑ 16 colors ❑ 256 colors ❑ High Color (16bits)

❑ True Color (24bits) ❑ True Color (32bits)

Parameters

Install Windows 2003

Installation Directory and Time zone

Computer Identification

OS

License Mode

User permitted

will participate in

Workgroup or Domain Name

Password for Administrator account

Installation Directory

Remote Password

Organization

User Name

Display settings

Product-ID

User Name

Computer Name

BitsPerPel

Resolution

VRefresh

Time Zone

Installation Drive

Installation destination

When selecting drive name

When installing OS from remote server

User account to create computer account

Password

Remote Source Path

Remote Username

User account

Installation method

15

1

B Design Sheet

Copy to install multiple adapters.

(continued)

Setting

❑ Install Unattended

❑ Install Manually

❑ T CP/IP ❑ NWIPX ❑ NetBEUI ❑ Apple T alk

❑ DLC ❑ NetMon ❑ PPT P

❑ Use DHCP

IP-Address

Subnet Mask

Default Gateway

IP-Address (additional) (only when added)

Subnet Mask (additional) (only when added)

Default Gateway (additional) (only when added)

DNS domain name (only when specified)

DNS server address (only when specified)

Use WINS ❑ Use

WINS server address DHCP (only when selected to use)

❑ Use NetBIOS sett ing from the DHCP Server

❑ Use NetBIOS over T CP/IP

❑ Do not use NetBIOS over T CP/IP

Internal network number 0x

Network number 0x

Packet T ype❑ Ethernet II ❑ Ethernet 802.2 ❑ Ethernet 802.3

❑ Ethernet SNAP ❑ Auto-detect ion

❑ T CP/IP ❑ NWIPX ❑ NetBEUI ❑ Apple T alk

❑ DLC ❑ NetMon ❑ PPT P

❑ Use DHCP

IP-Address

Subnet Mask

Default Gateway






Use WINS ❑ Use

WINS server address DHCP (only when selected to use)

❑ Use NetBIOS sett ing from the DHCP Server

❑ Use NetBIOS over T CP/IP

❑ Do not use NetBIOS over T CP/IP


Network number 0x

Packet T ype❑ Ethernet II ❑ Ethernet 802.2 ❑ Ethernet 802.3

❑ Ethernet SNAP ❑ Auto-detect ion

Network protocol

Network protocol property (for install unat tended)

Installation method

Parameters

Only when NWIPX is selected

NetBIOS option

Connection name

Use of DHCP (T CP/IP selected)

Available protocols

D

o

n

o

t

u

s

e

D

H

C

P

A

d

a

p

t

e

r

1

D

o

n

o

t

u

s

e

D

H

C

P

NetBIOS option

Connection name

Use of DHCP (T CP/IP selected)


A

d

a

p

t

e

r

2

Available protocols

6


(continued)

Setting

❑ Install default Components

❑ Install customized Components

Accessories

❑ clipboard viewer

❑ Desktop Wallpaper

❑ Document Template

❑ Paint

❑ All available mousepointers

❑ Word pad

❑ Calculator

❑ Character Map

Accessibility Wizard ❑ Install

Communications❑ Chat

❑ Hyper Terminal

ASP.NET web development platform ❑ Install

Application server console ❑ Install

Internet information services (IIS)

❑ FrontPage 2002 Server Extensions

❑ FTP (File Transfer Protocol) service

❑ NNTP Service - NNTP Service

❑ SMTP Service - SMTP Service

❑ World Wide Web Server

- Internet Information Services ASP support

- Internet Information Services web DAV publishing

- World Wide Web (WWW) Service

- Internet Information Services internet data connector

- Internet Information Services web user interface

❑ Management Console - based administration tools for IIS

❑ Internet Information Services

Network COM + access ❑ Install

DTC network access ❑ Install

❑ Install

❑ Install

❑ Install

❑ Install

❑ Install ❑ Server components of the Certificate Services

❑ Web client component of the Certificate Services

❑ Install ❑ POP3 main service ❑ POP3 web user interface

(Default - \Inetpub\Ftproot)

(Default - \Inetsrv\WWWroot)

Software Components

WWW server directory

Parameters

Application and utilit ies

Application server

FTP site directory

Indexing Server Files

Select installation method

Only when selecting components to install

FTP service property (only when FTP service is selected)

WWW service property (only when WWW service is selected)

Terminal Services

Terminal Services licensing

Remote Installation Services

Certificate Service

POP3 root component

17

1

B Design Sheet

(continued)

Setting

❑ Permit remote desktop during unattended setup

❑ Access permit compatible with Windows 2000 Users

❑ Access permit compatible with Terminal Server 4.0 Users

❑ Number of simultaneous users

❑ Number of connected sessions

❑ Application server mode ❑ Remote management mode

❑ Services for Macintosh (SFM)

❑ Print Service for Macintosh

❑ Print Service for UNIX

❑ WINS Server

❑ Internet Authentication Service (IAS)

❑ MS DNS Server

❑ Simple TCP/IP Service

❑ MS DHCP Server

❑ Network Monitor tools

❑ SNMP Service (Required to install SNMP-ServerView)

❑ Send

❑ Receive

(only when specified)

❑ Physical ❑ Datalink and sub network

❑ End-to-End ❑ Application ❑ Internet

Parameters

Terminal service

License Mode

Current mode for terminal serevice

Authorize the following access permits to

terminal service users

Networking Services

Receive SNMP packet from all hosts

Trap

Security

Send authentication trap

Receivable community name

Community name

Trap destination

SNMP details (only when SNMP is selected)

Management and Monitoring Tools

Host name

Contact

Address

Agent

Service

Terminal server property (only when terminal server is selected)

Services

Other network file and Print Services

8


Setting

❑ Install

❑ Create a domain in a new forest

❑ Additional domain controller of the existing domain

❑ Create a new child domain under the existing domain tree

❑ Create a new domain tree in the existing forest

❑ Permit

Database folder

Active Directory type

Active Directory details setting (only when DNS is selected)

Parameters

Log folder

SYSVOL folder location

Install Active Directory

Complete DNS name of the new domain

Create a domain in a new forest (only when selected)

Compatibility with Windows 2000 or

earlier server OS

User name

Password

Domain

Additional domain controller of the existing domain (only when selected)

Domain NetBIOS name

Complete DNS name of the parent domain

New child domain name

Domain NetBIOS name

User name

Create a new domain tree in the existing forest (only when selected)

Password

Domain name



User name

Password

Domain

Create a new child domain under the existing domain tree (only when selected)

Domain NetBIOS name

19

2

B Design Sheet


(continued)

Setting

❑ Windows 2000 Server

❑ Windows 2000 Advanced Server

❑ per Seat

❑ per Server

(Only when concurrent users are selected)

❑ Work group ❑ Domain

(Default - MYUSERGROUP)

❑ Install the OS from the local CD

❑ Install the OS from the remote server

(Default - (GMT+01:00) Amsterdam, Berlin,

Bern, Rome, Stockholm, Vienna)

❑ Use default ❑ Drive name

❑ C: ❑ D: ❑ E: ❑ F: ❑ G: ❑ H: ❑ I: ❑ J: ❑ K: ❑ L: ❑ M: ❑ N:

❑ O: ❑ P: ❑ Q: ❑ R: ❑ S: ❑ T: ❑ U: ❑ V: ❑ W: ❑ X: ❑ Y: ❑ Z:

❑ Use Default ❑ Prompt User

❑ Specify now

(Default - \winnt)

❑ - - - -

❑ 640 * 480 ❑ 800 * 600 ❑ 1024 * 768

❑ 1156 * 864 ❑ 1280 * 1024 ❑ 1600 * 1200

❑ 60 ❑ 70 ❑ 72 ❑ 75 ❑ 80 ❑ 85 ❑ 100

❑ 16 colors ❑ 256 colors ❑ High Color (16bits)

❑ T rue Color (24bits) ❑ T rue Color (32bits)

Computer Name

Resolution

Product-ID

VRefresh

Remote Source Path

Remote Username

User Name

Organization

Remote Password

User Name

User account to create computer account (only when Domain is selected)

Installation Destination

Installation directory

When selecting drive name

Installation method

When installing OS from remote server

T ime Zone

Password

Installation Drive

User account

Parameters

Install Windows 2000

Installation Directory and Time zone

Computer identification information

License mode

OS

Password for Administrator

Number of simultaneous connection

Participation

Work group or domain name

Display settings

BitsPerPel

0


Copy to install multiple adapters.

(continued)

Setting

❑ Install Unattended

❑ Install Manually

❑ TCP/IP ❑ NWIPX ❑ NetBEUI ❑ Apple Talk

❑ DLC ❑ NetMon ❑ PPTP

❑ Use DHCP

IP-Address

Subnet Mask

Default Gateway






Use WINS ❑ Use

WINS server address (only when selected to use WINS)

❑ Use NetBIOS setting from DHCP server

❑ Enable NetBIOS over TCP/IP

❑ Disable NetBIOS over TCP/IP


Network number 0x

Packet Type❑ Ethernet II ❑ Ethernet 802.2 ❑ Ethernet 802.3

❑ Ethernet SNAP ❑ Auto-detection

❑ TCP/IP ❑ NWIPX ❑ NetBEUI ❑ Apple Talk

❑ DLC ❑ NetMon ❑ PPTP

❑ Use DHCP

IP-Address

Subnet Mask

Default Gateway






Use WINS ❑ Use

WINS server address (only when selected to use WINS)

❑ Use NetBIOS setting from DHCP server

❑ Enable NetBIOS over TCP/IP

❑ Disable NetBIOS over TCP/IP


Network number 0x

Packet Type❑ Ethernet II ❑ Ethernet 802.2 ❑ Ethernet 802.3

❑ Ethernet SNAP ❑ Auto-detection

NetBIOS option


NetBIOS option

Use of DHCP (When TCP/IP selected)

Connection name

A

d

a

p

t

e

r

1

Available protocols

D

o

n

o

t

u

s

e

D

H

C

P

Installation method

Connection name

A

d

a

p

t

e

r

2

Available protocols

D

o

n

o

t

u

s

e

D

H

C

P


Use of DHCP (When TCP/IP selected)

Network protocol

Network protocol property (for install unattended)

Parameters

21

2

B Design Sheet

(continued)

Sett ing

❑ Install default Components

❑ Install customized Components

❑ (IIS) common component

❑ (IIS) online help

❑ FT P (File T ransfer Protocol) server

❑ Internet service manager (HT ML)

❑ Internet information service snap-in

❑ NNT P Service

❑ SMT P Service

❑ WWW (World Wide Web) server

❑ Remote install service

❑ Remote storage

❑ T erminal Services

❑ T erminal Services licensing

❑ T erminal Services client creator file

❑ Indexing Server Files

❑ COM Internet service proxy

❑ FrontPage 2000 Server Extensions

❑ Cert ificate Service

❑ Web client component of the Cert ificate Services

❑ Server components of the Cert ificate Service

(Default - \Inetpub\Ftproot)

(Default - \Inetsrv\WWWroot)

❑ Hyper T erminal ❑ Dialler

❑ Chat ❑ Message queue service

❑ Other network file and print service

❑ CD player ❑ Medial player

❑ Utopia sound set t ing ❑ Sound recorder

❑ Volume control ❑ Sample sound

❑ Accessibility set t ing wizard ❑ Character Map

❑ Calculator ❑ Paint

❑ Word pad ❑ Document T emplate

❑ Script debugger ❑ Object packager

❑ Desktop Wallpaper ❑ Mousepointers

❑ Free cell ❑ Mine sweeper ❑ P inball ❑ Solitaire

❑ Simple Network Management Protocol (SNMP)

❑ Domain Name System (DNS)

❑ Dynamic Host Configurat ion Protocol (DHCP)

❑ Windows Internet Name Service (WINS)

❑ Simple T CP/IP service

❑ Network monitor tool

❑ Internet authenticat ion service

❑ Site Server ILS service

❑ Print service for UNIX

❑ Print service for Macintosh

❑ Connect ion manager component

❑ File service for Macintosh

Parameters

WWW server directory

Services

Select installat ion method

Software Components

FT P site directory

Only when select ing component to install

Communicat ions

Mult imedia

Game

Accessories

Service

Service

2


Setting

❑ Send

❑ Receive

(only when specified)

❑ Physical ❑ Datalink and sub network

❑ End-to-End ❑ Application ❑ Internet

❑ Install

❑ Create a new forest of a domain tree

❑ Add additional domain controller of the existing domain

❑ Add a new child domain under the existing domain tree

❑ Place a new domain tree in the existing forest

❑ Permit

Parameters

Active Directory type

Trap

Security

Agent

SNMP details (only when SNMP is se lected)

Domain NetBIOS name

Parent domain name

Child domain name

Domain NetBIOS name

Complete DNS name of the new tree

Domain NetBIOS name

User name

Password

Complete DNS name of the domain

Domain

Add a new child domain under the existing domain tree (only when selected)

Place a new domain tree in the existing forest (only when selected)

User name

Password

Domain name

Complete DNS name of the new tree

Domain

User name

Password

Add additional domain controller of the existing domain (only when selected)

Trap destination

Send authentication trap

Receivable community name

Install Active Directory

Active Directory details setting (only when DNS is se lected)

Access permit compatibility with

Windows 2000 or earlier server

SYSVOL folder location

Database location

Log location

Create a new forest of a domain tree (only when selected)

Contact

Service

Community name

Receive SNMP packet from all hosts

Address

Host name

23

2

B Design Sheet

B.5 Application Wizard

Setting

❑ Windows 2000 service pack

❑ ServerView

❑ DSNAP

(only when selecting additional software)

❑ Install selected application from Local CD

❑ Install selected application from Remote Server

❑ Install ❑ Do not install

Remote Resource Path

Remote Username

Remote Password

When installing from remote server

Parameters

Installation method

Installable applications

Userspecific Command

4

C Accident Sheet

Name(Product ID)

OS

For optional configuration and settings, use Configuration Sheet in the section A.

Phase of accident

DATE/TIME

LAN/WAN config.

Environment

PRIMERGY RX200 S2 (PG )

What did you do?, what message? etc.

Attached paper Yes/No

25

• The contents of this manual may be revised without prior notice.

• Fujitsu assumes no liability for damages to third party copyrights or other rights

arising from the use of any information in this manual.

• No part of this manual may be reproduced in any form without the prior written

permission of Fujitsu.

PRIMERGY RX200 S2

Configuration Sheets

B7FH-3051-02ENZ0-00

Issued on

Issued by

August, 2005 FUJITSU LIMITED

about this manual - fujitsu this manual abbreviations the ... eth. ctrl 1000-base-t cu lp ... hyper...

Documents