abralon quality from start to finish. research & development centre
TRANSCRIPT
Abralon
Quality from start to finish
Quality from start to finish
RESEARCH & DEVELOPMENT RESEARCH & DEVELOPMENT CENTRECENTRE
RESEARCH & DEVELOPMENT RESEARCH & DEVELOPMENT CENTRECENTRE
For surface structuring of: paints, primers, top coats, clear coats, composites and plastics
Abralon® – When and How
Grain: Silicon carbideBonding: Special resinBacking: Knitted fabric
on foamCoating: Special Abralon®
method Colour: GreyGrit range: 180, 360, 500,600
1000, 2000, 4000
Abralon® – Technical Specification
Conventional abresive.Two dimensional closed structure.
AbralonTwo and three dimensional open structure
Non woven.Three dimensional openstructure
Abralon® – Leveling, Dirt Sensitivity
FLEXIBLE
• Edges, corners and contours are no longer a problem when sanding with Abralon
• The flexibility can be extended by using an interface pad.
Abralon®
SELFCLEANINGCompression of foam backing makes water and air circulateround the grit. Swarf is transported from surface into the foam.
Abralon®
Grit cuts deeper with conventionalstiff backing.
Grit bends back with Abralon andmakes an even scratch.
Abralon® – Cutting Property
Topcoat
Primer
Deep V-scratches extends curing time
U-scratches clear out solvents faster.
Abralon® – Scratch Shapes
Royal P320 Royal P320 + Abralon® 500
Abralon® – Scratch Shapes
Topcoat paint
Filler / Primer
Metal sheet
Mechanical bond between layers of paint
Abralon® – Scratch Form
Abralon 500Abralon 1000
Abralon 2000Abralon 4000
Abralon®
• Good structuring properties on: - primers, after leveling
- mattening of paint and clear before spraying - composites - dust enclosures - orange peels
•saves paint & gives deep luster •saves repainting & time
Abralon® – When and Why
• Fast polishing properties on:- oxidized paints
- removal of dirt- car wash marks- water spots- acid spots- gel coats- “korian”- cast marble- marble
* Large areas fast
Abralon® – When and Why