academic calendar academic year 2017 18€¦ · college was accredited by naac in the month of...
TRANSCRIPT
(Approved by the AICTE, Recognized by UGC and Affiliated to
Anna University, Chennai)
Promoted and run by
SRET (Sri Rengaswamy Educational Trust) Komarapalayam - 637 303, TamilNadu, India
Email: [email protected],
Phone: 04288 - 227361 - 67
Website: www.excelinstitutions.com
ACADEMIC CALENDAR
ACADEMIC YEAR 2017 – 18
Courses Offered
Our College was approved by AICTE on 16th August, 2007, with a total intake of 240 students. The
college was accredited by NAAC in the Month of November 2016. The Anna University has given
permanent affiliation in October 2017. The intake for the current academic year 2017-18 is 792. The College
is affiliated to Anna University, Chennai. The Following courses are offered during the current academic
year 2017-18.
S. No. Branch Intake
Undergraduate program (B.E/B. Tech)
1 B.E. Aeronautical Engineering 120
2 B.E. Computer Science and Engineering 120
3 B.E. Electronics and Communication
Engineering 120
4 B. Tech. Information Technology 60
5 B.E. Mechanical Engineering 120
6 B.E. Civil Engineering 120
Postgraduate program
7 M.E. Computer Science and Engineering 24
8 M.E. Applied Electronics 18
9 M.E. Structural Engineering 24
10 M.E. Environmental Engineering 24
11 M.E. Thermal Engineering 24
12 M.E. Aeronautical Engineering 18
Commencement of the Classes 2017-18
The Inauguration of the First year B.E / B.Tech Classes were held on 20th and 21nd July 2017 with
551 fresher’s of UG and 83 PG freshers. At present the total strength of students is 2363 (1653 boys and 710
Girls).They are supported by 208 Faculty Members and 174 Non-Teaching and Service Staff Members.
Discipline and Dress Code
A strict and decent dress code for students is followed in our college. A committee comprising of all
HODs and selected faculty members continuously monitor the students. Our students are cooperating very
well to maintain the discipline and decorum in all aspects. Use of mobile phones inside the college is strictly
prohibited.
Infrastructure facilities
Our visionary Management has created surplus infrastructure facilities in all respects and it exceeds
the norms set by the regulatory bodies. The present constructed area of the college is 22,170 Sq.m. and an
additional area of 5000Sq.m. in which Auditorium and Temple is constructed. A new Green hostel has been
constructed for the welfare of the boys’ students. Additional infrastructural facilities have been created
during this year by way of purchasing new sophisticated equipments and library books. The other amenities
made available in the campus:
1. Hostel for boys and girls separately
2. 3 - Food courts
3. 2- Photo copy Shops
4. Book Depot
5. Transport Facilities
6. Full time Medical Centre
7. 2- Gymnastic Centre
8. Indoor Game facilities
9. 3- Parking facilities for two and four wheelers
10. WIFI connectivity -100 Mbps
11. Temple
12. Auditorium
Library
Our Library is well equipped with numerous Books, National and International Journals. It functions
from 9.00 am. To 7.00 pm. on all working days. The Library transactions are maintained by Integrated
Library Management Software package with Bar-coding provisions. The Online Public Access Catalogue
(OPAC) facility is available to save the access time of the users.
7992 Number of Titles
29327 Number of Volumes
7300 e-books
108 National Journals
108 International Journals
DELNET Facility to access n number of Journals
Services to the Students
Providing assistance to get educational loans from banks
Bus passes to travel in Government operated buses
Railway concessions are arranged for Industrial Visits and for travel to their homes during holidays
Scholarships from TN Govt. for BC, MBC, SC & ST students, farmer’s scholarship and Govt. of India
scholarship for SC & ST students are arranged
Number of students received BC / MBC Scholarship-653
Amount distributed to the students in BC/ MBC Scholarship –Rs34,69,700/-
Number of students received SC Scholarship-689
Amount distributed to the students in SC Scholarship –Rs.5,36,54,300/-
Number of students received SRET Scholarship-724
Total no. of students who received the above scholarships is 2066.
Co-Curricular & Professional Society Activities
Many club activities are organized periodically for improving the performance in Co-curricular and
Extra-curricular of the students:
1. Soft Skills Development Club
2. Software Development Center
3. Entrepreneurship Development Cell
4. Youth Red Cross
5. Literary Club
6. Rotaract Club
7. Research Forum
8. Professional Societies - CSI, ISTE, IEEE,IETE & IE
9. Fine Arts Club
10. Eco club
We have formed various committees as per the norms of Anna University, for the benefit of the
students and staff members like:
Grievances cum Redressal Committee
Disciplinary Committee
Anti-ragging committee
Planning and Monitoring Board
Library Advisory Committee
Staff Welfare Committee
The performance of the students is available online for continuous monitoring and appraisal. The
Attendance of the students is maintained through ERP Software. Parents are intimated at regular intervals.
Vision
To create competitive human resources in the fields of engineering for the benefit of society to meet
global Challenges
Mission
To provide a conducive ambience for better learning and to bring creativity in the students
To develop sustainable environment for innovative learning to serve the needy
To meet global demands for excellence in technical education
To train young minds with values, culture, integrity, innovation and leadership
Objectives
To emerge as a globally recognized centre for excellence in the field of Engineering
To attain the status of autonomy and to offer career oriented programmes
To have collaborations with reputed International Universities / Industries
The Vision, Mission and Objectives of the institution are communicated to students, teaching staff, non
teaching staff, parents and other stake holders through the following method:
They are displayed at key points viz near the Principal’s office, Administrative Office, Seminar halls,
HODs Cabins, Class rooms, Lab, Buses, verandas, Hostel & Mess.
Head of the Institute makes aware of the vision and Mission of the Institute during all important
functions like Annual Day, Convocation Day etc.
Awareness about the Vision and Mission is conveyed to students and staffs through Hand books,
important broucher, magazines, Notebook cover pages etc.
The newly recruited staff is introduced to the various programs, activities, facilities and other
important values and regulation of the institution.
Executive Summary of the Institution
Courses offered
UG Programmes PG Programmes
B.E., Aeronautical Engineering M.E., Aeronautical Engineering
B.E., Civil Engineering M.E., Structural Engineering
M.E., Environmental Engineering
B.E., Computer Sceince Engineering M.E., Computer Sceince Engineering
B.E., Electronics & Communication Engg., M.E., Electronics & Communication Engg.,
B.E., Mechanical Engineering M.E., Thermal Engineering
B.Tech., Information Technology -
SWOC Analysis of the Institution
The objective of carrying out SWOC analysis is primarily to understand the shortcomings
of the institutions both quantitatively as well as qualitatively. This exercise also results in identification of
appropriate areas of technology and thereby helps in developing industry ready employable graduates. The
Principal, the Dean, the Heads of the Departments, the faculty, supporting and administrative staff and
sample of students of all branches participated in SWOC analysis. The major inputs considered are
1. Infrastructure
2. Process
3. Financial Support
4. Human Resources
Strength
Eco-friendly and conducive working atmosphere.
Updated university curriculum to impart futuristic technical education to improve the students’
standard in global arena.
Well maintained state-of-art building infrastructure and laboratory facilities.
Well stacked library with good number of national and international journals.
Prof. Dr. A. K. Natesan, Hon. Chairman of the institution, being an academician, educationist,
philanthropist and as an Academic Council member in Anna University, Chennai gives much
impetus for development of institution.
Various clubs and cells to shape the students.
The college which is just eight years old has been awarded fastest growing institution by Brands
Academy during the year 2011.
Constant encouragement given to the faculty members in pursuing research leading to Ph.D.
The institute is situated on National Highway 47 which is easily reachable and visible to travelers.
Good sports facilities, infrastructure for hosting events of National Standards in sports and games.
Students’ association activities, mentoring, faculty appraisal, online students’ feedback system.
30% of tuition fee is distributed as scholarships / tuition fee waiver to financially weak and
meritorious students. Merit based educational scholarship is being offered for the last 5 years to all
needy.
Round the clock medical facility is provided to students with ambulance facilities.
A Data Centre with high end blade server serves the students and faculty members with academic
resources like NPTEL etc., by connecting about 800 systems in the campus with OFC network.
Internal Quality Assurance Cell (IQAC) is formed and it monitors the progress of curricular, co-
curricular and extra-curricular activities by consistent efforts to improve the standards of professional
education.
National Conferences, Symposiums, Workshops, faculty training programs for students, researchers
and faculty members are being organized by the Institution for bridging the gap between the Industry
and Institute on regular basis.
Weakness
Majority of students are from rural areas with Tamil, Malayalam and Hindi as the medium of
instruction in school level
The Scarcity of very well qualified senior professors especially for the core engineering. However,
the continuous effort is made by management team to recruit very senior level faculty from reputed
institutions.
As the College is situated in the rural area, where there is less number of industries, industry-institute
interactions are minimal.
Opportunities
An improved research environment can be foreseen as good number of faculty members pursuing
Ph.D.,
Empowering all the faculty members by analyzing ways and means to undertake consultancy.
Improvement of national and regional recognition of the institution.
Students project internship is encouraged in industries and national laboratories
Development of web-based online courses
Students participation in club activities and intercollegiate competitions
Preparing students for GATE, BEC and aptitude Examinations
Scope of PG students to pursue Ph.D. under the supervision of the faculty members of the institute in
association with the affiliated university
Enough Areas are available to develop Technology Incubators and to initiate activities in association
with EDDISSIA, Salem Productivity Council etc.,
The introduction of curriculum beyond syllabus will help the students to improve their employability
skills
More opportunities to place the students in MSME Industries by Consistent contacts and MoU’s with
organization like ICTACT, etc.,
Challenges
Training rural based Tamil medium students in English language and developing communication
skills of them is really a challenging job.
Competition from autonomous colleges functioning in the nearby areas.
Starting of new engineering college in the vicinity is a growing competition.
Balancing administrative, academic and research work.
Fast changes in technology.
Generating of funds through consultancy as no big industries are in the vicinity.
Recruitment of qualified and experienced faculty members for rural area colleges.
Details of programmes offered by the college
Programme
level Name of the programme /course Duration
Sanctioned
intake
UG Level
B.E., Aeronautical Engineering
4 years
120
B.E., Civil Engineering 120
B.E., Computer Science Engineering 120
B.E., Electronics & Communication Engineering 120
B.E., Mechanical Engineering 120
B.Tech., Information Technology 60
PG Level
M.E., Aeronautical Engineering
2 years
18
M.E., Structural Engineering 24
M.E., Environmental Engineering 24
M.E., Computer Science Engineering 24
B.E., Applied Electronics 18
M.E., Thermal Engineering 24
Teacher-student ratio for each of the programme / course offered.
For B.E/B.Tech : 1:15 and
For M.E/M.Tech., : 1:12
Internal Quality Assurance Cell (IQAC)
IQAC helps to coordinate all departments under one roof which in turn ensures the excellence in
each activity. It monitors the activities of all the departments with different heads as listed below,
Sl. No. IQAC Head Name of the Overall Coordinator
1. Academic Coordinator Dr.S.Anbukaruppusamy, HOD/ECE
2. Teaching Coordinator Mr.L.Bharathi, ASP/ECE
3. Research Coordinator Dr.P.Karunakaran, HOD/AERO
4. Extension Activity Coordinator Dr.G.Nallakumarasamy, HOD/MECH
5. Exam Coordinator Mr.A.Karthikeyan, ASP/AERO
6. IIPC Coordinator Dr.G.Vijayakumar, ASP/Civil
7. Training and Placement Mr.K.Sabiknainar, AP/AERO
8. Website/Newsletter/MIS Dr.M.Selvam, HOD/CSE
9. System Maintenance and Infrastructure Dr.S.Shanmugasundaram, HOD/Civil
10. Public relation and Scholarship Dr.K.Geetha, ASP/CSE
Measures of Teaching Learning Process
Periodical Class Committee meeting (Twice in a semester)
Weekly IQAC coordinators meeting
Principal-HOD Meeting (Weekly)
Result Analysis Meeting
Management Review Meeting (MRM)
HOD - Faculty Meeting
Academic Review Meeting (ARM)
Academic Schedule ODD Semester
Academic Schedule Even Semester
Department of Aeronautical Engineering
Vision
To empower the students with subject knowledge of Aeronautical Engineering for serving the
society in a challenging global environment
Mission
To provide quality technical education in tune with the challenges
To offer latest technological developments in the fields of Aeronautical Engineering
To integrate the intellectual, spiritual, ethical and social development of the students for becoming
dynamic Aeronautical Engineers
To initiate desires for undertaking entrepreneurship and lifelong learning
Program Educational Objectives (PEOs)
I. To strengthen the fundamental subject knowledge and practical skills of the aeronautical Students for
meeting the requirements of Aeronautical industries and educational institutions including research
centre
II. To give quality technical Education to the students covering latest technological concepts for
facilitating them to diagnose and solve industrial problems
III. To shape the students for becoming socially, intellectually and ethically responsible Aeronautical
Engineers
IV. To provide necessary technical, managerial and soft skills to the students for making them industry
ready
Program Outcomes (POs)
a. Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals,
and an engineering specialization to the solution of complex engineering problems.
b. Problem analysis: Identify, formulate, review research literature, and analyze complex engineering
problems reaching substantiated conclusions using first principles of mathematics, natural sciences,
and engineering sciences
c. Design/development of solutions: Design solutions for complex engineering problems and design
system components or processes that meet the specified needs with appropriate consideration for the
public health and safety, and the cultural, societal, and environmental considerations
d. Conduct investigations of complex problems: Use research-based knowledge and research
methods including design of experiments, analysis and interpretation of data, and synthesis of the
information to provide valid conclusions
e. Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern
engineering and IT tools including prediction and modeling to complex engineering activities with
an understanding of the limitations
f. The engineer and society: Apply reasoning informed by the contextual knowledge to assess
societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to the
professional engineering practice
g. Environment and sustainability: Understand the impact of the professional engineering solutions
in societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable
development
h. Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of
the engineering practice
i. Individual and team work: Function effectively as an individual, and as a member or leader in
diverse teams, and in multidisciplinary settings
j. Communication: Communicate effectively on complex engineering activities with the engineering
community and with society at large, such as, being able to comprehend and write effective reports
and design documentation, make effective presentations, and give and receive clear instructions
k. Project management and finance: Demonstrate knowledge and understanding of the engineering
and management principles and apply these to one’s own work, as a member and leader in a team, to
manage projects and in multidisciplinary environments
l. Life-long learning: Recognize the need for, and have the preparation and ability to engage in
independent and life-long learning in the broadest context of technological change
Program Specific Outcomes (PSOs)
PSO1: Core Skills - Identify, formulate and analyze complex Engineering problems in Aerodynamics,
Propulsion, Aircraft Structures, Aircraft Manufacturing and Maintenance domains.
PSO 2: Interdisciplinary Skills - Design and develop interdisciplinary and innovative systems.
PSO 3: Personality Development - Inculcate effective communication skills, team work, ethics and
leadership preparation for a successful career in industry and R&D organizations.
Faculty Details
S. No. Name of the Staff Qualification Designation DOJ
1. Dr.P.Karunakaran M.E., Ph.D Professor & Head 12.06.2017
2. Dr.D.Deva Kumar M.E., Ph.D Professor 01.03.2007
3. Dr.R.Rajasekar M.S., Ph.D Professor 03.02.2015
4. Dr.S.Christian Johnson M.Tech., Ph.D Professor 02.07.2012
5. S.P.Venkatesan M.E.,(Ph.D) Associate Professor 04.07.2011
6. A.Karthikeyan M.E Associate Professor 06.07.2010
7. K.Vijayababu M.E Associate Professor 14.06.2012
8. N.Venkatachalam M.E., (Ph.D) Associate Professor 23.06.2014
9. P.V.Prakash M.E Associate Professor 05.02.2010
10. A.Sabik Nainar M.E Assistant Professor 26.07.2013
11. N.Sreenivasaraja M.E Assistant Professor 18.08.2014
12. S.Balasundaram M.E Assistant Professor 30.12.2013
13. S.Prabhu M.E Assistant Professor 14.06.2012
14. T.M.Sakthi Muruga M.E Assistant Professor 16.06.2012
15. G.Velmurugan M.E Assistant Professor 25.07.2013
16. D.Vadivel M.E Assistant Professor 26.07.2013
17. T.Kamalraj M.E Assistant Professor 30.12.2014
18. S.Prashanth M.E., (Ph.D) Assistant Professor 30.06.2014
19. S.Karthik M.E Assistant Professor 30.06.2014
20. R.Anand M.E Assistant Professor 01.07.2015
21. A.Jothivel M.E Assistant Professor 15.06.2015
22. S.R.Arun M.E Assistant Professor 08.07.2016
23. M.Deepthi M.E Assistant Professor 20.07.2017
24. P.M.Radhakrishnan M.E Assistant Professor 14.06.2017
25. MD.Hussain M F M.E Assistant Professor 12.06.2017
26. P.Deepakkumar M.E Assistant Professor 12.06.2017
Department of Civil Engineering
Vision
To provide young technocrats of highest caliber to the nation, who would engage in research, design and
development to attain self reliance in its technological needs
Mission
To provide a solid foundation in mathematics, sciences, and technical skills needed to analyze and
design civil infrastructure systems.
To familiar with current and emerging civil engineering and global issues, and have an understanding of
ethical and societal responsibilities.
To utilizing the latest facilities and infrastructure which would enable them to face all challenges in life
Program Educational Objectives (PEOs)
I. To shape the students will be successfully employed in Engineering, Science and Technology
courses
II. To prepare the students will have the ability to obtain professionals
III. To shape the students will have the ability to obtain professional license and will recognize the need
for Engineering in lifelong learning.
IV. The students will engage in continual learning by pursuing advanced degree or additional conference
education opportunities through course work, professional conferences and training or participation
in professional societie
V. The students will pursue professional registratory other appropriate certification
Programme Outcomes
a. Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals, and
an engineering specialization to the solution of complex engineering problems
b. Problem analysis: Identify, formulate, review research literature, and analyze complex engineering
problems reaching substantiated conclusions using first principles of mathematics, natural science, and
engineering science
c. Design/ development of solution: Design solutions for complex engineering problems and design system
components or processes that meet the specified needs with appropriate consideration for the public health
and safety, and the cultural, societal, and environmental considerations
d. Conduct investigation of complex problems: Use research-based knowledge and research methods
including design of experiments, analysis and interpretation of data, and synthesis of the information to
provide valid conclusions
e. Modern tool usage: Create, select and apply appropriate techniques, resources, and modern engineering
and IT tools including prediction and modeling to complex engineering activities with an understanding of
the limitations
f. The engineer and society: Apply reasoning informed by the contextual knowledge to assess societal,
health, safety, legal and cultural issues and the consequent responsibilities relevant to the professional
engineering practice
g. Environment and sustainability: Understand the impact of the professional engineering solutions in
societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable
development
h. Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of the
engineering practice
i. Individual and team work: Function effectively as an individual, and as a member or leader in diverse
teams, and in multidisciplinary settings
j. Communication: Communicate effectively on complex engineering activities with the engineering
community and with the society at large, such as being able to comprehend and write effective reports and
design documentation, make effective presentations, and give and receive clear instructions
k. Project management and finance: Demonstrate knowledge and understanding of the engineering and
management principles and apply these to one’s own work, as a member and leader in a team, to manage
projects and in multidisciplinary environments
l. Life-long learning: Recognize the need for, and have the preparation and ability to engage in independent
and life-long learning in the broadest context of technological change
Programme Specific Outcomes (PSOs)
PSO1: Ability to learn the analysis and design of various structural elements
PSO2: To provide adequate knowledge on construction materials and its behavioral studies
Faculty Details
S. No. Name of the Staff Qualification Designation DOJ
1. Dr.S.Shanmugasundaram Ph.D., Professor & Head 17.05.2017
2. Dr.N.Sengottaian Ph.D., Professor 02.04.2007
3. Dr.P.Subramaniam Ph.D., Professor 15.06.2015
4. Dr.G.Vijayakumar Ph.D., Professor 16.02.2012
5. Mr.M.Seenirajan M.E., (Ph.D.,) Associate Professor 07.07.2016
6. Mr.A.Subramanian M.E., Associate Professor 06.05.2015
7. Mr.N.Elamvaluthi M.E., Associate Professor 28.01.2016
8. Mr.S.Sasikumar M.E., Assistant Professor 12.06.2017
9. Mr.Venkatesh N M.E., Assistant Professor 12.06.2017
10. Mr.K.Sabarinathan M.E.,(Ph.D) Assistant Professor 01.02.2016
11. Mr.C.Arundoss M.E., Assistant Professor 01.02.2016
12. Mr.R.Anbarasu M.E., Assistant Professor 25.06.2016
13. Mr.S.M.Sakthivel M.E., Assistant Professor 01.07.2013
14. Mr.K.J.Pradeepkumar M.E., Assistant Professor 15.06.2015
15. Mr.G.Chandrasekaran M.E., Assistant Professor 15.06.2015
16. Mrs.P.Padmapoorani M.E., Assistant Professor 02.05.2014
17. Mrs.N.Mythily M.E., Assistant Professor 25.05.2015
18. Ms.D.Mythili M.E.,(Ph.D) Assistant Professor 01.07.2013
19. Mr.S.Arun kumar M.E., Assistant Professor 28.01.2016
20. Mr.R.Mohanraj M.E.,(Ph.D) Assistant Professor 25.06.2015
21. Mr.R.Krishnasamy M.E.,(Ph.D) Assistant Professor 15.06.2015
22. Mrs.E.Kavitha M.E.,(Ph.D) Assistant Professor 15.06.2015
23. Mr.D.Sathiya Narayanan M.E., Assistant Professor 15.06.2015
24. Mr.S.Rajkumar M.E., Assistant Professor 12.05.2014
25. Mr.C.Dinesh Aravinth M.E., Assistant Professor 25.06.2016
26. Mr.S.Karthik M.E., Assistant Professor 25.06.2016
27. Ms.S.Hema M.E., Assistant Professor 25.06.2016
28. Mr.R.Sakthivel M.E., Assistant Professor 25.06.2016
29. Mr.S.Vignesh M.Tech., Assistant Professor 25.06.2016
30. Mr.R.Jeyaprakash M.E.,(Ph.D) Assistant Professor 16.07.2016
31. Mr.Aashik A R M.E., Assistant Professor 12.06.2017
32. Mrs.Rooba Lavanya M M.E., Assistant Professor 12.06.2017
33. Mr.Raja M M.E., Assistant Professor 12.06.2017
34. Mr.Vignesh Prabhu V M.E., Assistant Professor 12.06.2017
35. Mr.Vinoth Kumar P M.E., Assistant Professor 12.06.2017
36. Mr.Rajeshkumar P M.E., Assistant Professor 12.06.2017
37. Mr.Anbalagan A M.E., Assistant Professor 12.06.2017
38. Mrs.N.Vanathi M.E., Assistant Professor 12.06.2017
39. Ms.A.Sujitha Rekha M.E., Assistant Professor 17.07.2017
40. Mrs.K.Saranya M.E., Assistant Professor 12.06.2017
41. Mr.P.Varatharajan M.E., Assistant Professor 14.06.2017
42. Mr.D.Arulshankar M.E., Assistant Professor 12.06.2017
43. Ms.B.Monisha M.E., Assistant Professor 14.06.2017
44. Ms.V.Vijayashanthimeena M.E., Assistant Professor 17.05.2017
Department of Computer Science and Engineering
Vision
To create better quality technical engineers in Computer Science and Engineering with ethically strong
values which cater local and global needs of the society.
Mission
To instill quality in engineering education that demands excellence
To initiate desire among the students to work in close cooperation and collaboration with industry and
professional bodies
To train the students for developing software and novel software systems.
To create ambience for taking initiatives towards entrepreneurship and lifelong learning
Program Educational Objectives (PEOs)
I. To provide fundamental knowledge to formulate, solve and analyze engineering problems and
pursue higher studies
II. To develop the ability of the students in comprehending, analyzing and synthesizing data in order to
design software and create novel software systems
III. To inculcate effective communication skills, team skills, professional and ethical attitude in the
students for enabling them to relate engineering issues with social issues in a broader context
IV. To provide students managerial and leadership skills so as to make them successfully employed and
to demonstrate a pursuit of lifelong learning in multidisciplinary environment
Program Outcomes (POs)
a. Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals, and
an engineering specialization to the solution of complex engineering problems
b. Problem analysis: Identify, formulate, review research literature, and analyze complex engineering
problems reaching substantiated conclusions using first principles of mathematics, natural sciences and
engineering sciences
c. Design/development of solutions: Design solutions for complex engineering problems and design system
components or processes that meet the specified needs with appropriate consideration for the public health
and safety, and the cultural, societal and environmental considerations
d. Conduct investigations of complex problems: Use research-based knowledge and research methods
including design of experiments, analysis and interpretation of data, and synthesis of the information to
provide valid conclusions.
e. Modern tool usage: Create, select and apply appropriate techniques, resources, and modern engineering
and IT tools including prediction and modeling to complex engineering activities with an understanding of
the limitations
f. The engineer and society: Apply reasoning informed by the contextual knowledge to assess societal,
health, safety, legal and cultural issues and the consequent responsibilities relevant to the professional
engineering practice
g. Environment and sustainability: Understand the impact of the professional engineering solutions in
societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable
development
h. Ethics: Apply ethical principles and commit to professional ethics and responsibilities, and norms of the
engineering practice
i. Individual and team work: Function effectively as an individual, and as a member or leader in diverse
teams, and in multidisciplinary settings
j. Communication: Communicate effectively on complex engineering activities with the engineering
community and with society at large, such as, being able to comprehend and write effective reports and
design documentation, make effective presentations, and give and receive clear instructions
k. Project management and finance: Demonstrate knowledge and understanding of the engineering and
management principles and apply these to one’s own work, as a member and leader in a team, to manage
projects and in multidisciplinary environments
l. Life-long learning: Recognize the need for, and have the preparation and ability to engage in independent
and life-long learning in the broadest context of technological change
Program Specific Outcomes (PSOs)
PSO1: Real World Knowledge: Apply the knowledge in solving the real world problems and cope up with
the issues and challenges of Information and Computing Technologies.
PSO2:Technical Skill Development: Play a vital role as individual and member of a team to develop
software solutions by the application of systematic approach and appropriate models with suitable
Languages, Tools, Integrated Development Environments (IDEs), Patterns, Frameworks and Architecture.
PSO: 3 Innovating Attitude: Adapt to emerging Information and Communication Technologies (ICT) to
innovate ideas and solutions to existing / novel problems and build the challenging attitude in realizing them
as contribution to the world.
Faculty Details
S. No. Name of the Staff Qualification Designation DOJ
1. Dr.M.Selvam Ph.D Professor / HOD 18.01.2017
2. Dr. K.Geetha Ph.D
Associate
Professor 01.03.2010
3. Dr.J.NirmalaDevi Ph.D
Associate
Professor 09.05.2009
4. Mrs.P.Kumari M.E. Assistant Professor 26.06.2009
5. Ms.S.Santhakumari M.Tech Assistant Professor 14.06.2017
6. Mr.M.P.Thiruvenkatasuresh M.E. Assistant Professor 15.06.2015
7. Mr.S.Prabagar M.E. Assistant Professor 14.06.2012
8. Mr.K.G.Arunkumar M.E. Assistant Professor 09.07.2009
9. Mr.P.Senthil Kumar M.E. Assistant Professor 14.06.2012
10. Mr.P.Mohanraj M.E. Assistant Professor 27.05.2011
11. Mr.A.Alagar M.E. Assistant Professor 01.07.2013
12. Mr.N.Naveen M.E. Assistant Professor 01.07.2013
13. Mr.P.Dineshkumar M.E. Assistant Professor 01.07.2013
14. Mr.V.Surendiran M.E. Assistant Professor 26.07.2013
15. Mr.B.Praveen Kumar M.E. Assistant Professor 05.08.2013
16. Mr.E.DeepanKumar M.E. Assistant Professor 22.06.2015
17. Mr.D.Vaduganathan M.E. Assistant Professor 22.06.2015
18. Mr.P.Dineshkumar M.E. Assistant Professor 22.06.2015
19. Mr.T.Arunkumar M.E. Assistant Professor 06.08.2015
20. Mr.P.Thiyagarajan M.E. Assistant Professor 27.07.2015
21. Mr.A.Sureshkumar M.E. Assistant Professor 12.08.2015
22. Mr.P.Sathyaraj M.E. Assistant Professor 12.06.2017
23. Mr.S .Praveenkumar M.Tech Assistant Professor 12.06.2017
24. Mr.S.Ramesh M.E. Assistant Professor 12.06.2017
25. Mr.S.S.Karthik Kumar M.Tech Assistant Professor 30.06.2014
26. Mrs .C.Sharmila M.E. Assistant Professor 30.06.2014
27. Mr.Muthukumar M.E. Assistant Professor 14.06.2017
28. Mr. P. Gowsikraja M.E. Assistant Professor 17.07.2017
Department of Information Technology
Vision
To craft professional technocrats with ethically strong human values to cater the global needs in the
field of IT
Mission
To provide technical education with global standards and to prepare students for achieving
professional carrier and higher education
To initiate research culture and innovation
To promote entrepreneurship initiatives among stakeholders
To create ambience for achieving societal needs
Programme Educational Objectives (PEOs)
I. To make students excel in professional career and/or higher education by acquiring knowledge in
mathematical, computing and engineering principles
II. To prepare students for analyzing real life problems, design computing systems appropriate to its
solutions that are technically sound, economically feasible and socially acceptable
III. To exhibit professionalism, ethical attitude, communication skills, team work in their profession and
adapt to current trends by engaging in lifelong learning
Programme Outcomes (POs)
a. Engineering knowledge: An Ability to apply knowledge of computing, mathematics, science and
engineering fundamentals in Information and Communication Engineering.
b. Problem analysis: An Ability to analyze a problem, identify and formulate the computing requirements
to obtain appropriate solution
c. Design/development of solutions: An Ability to design, implement, and evaluate a computer-based
system, process, component, or program to meet desired needs with appropriate consideration for public
health, safety, cultural, societal and environmental considerations
d. Investigations of complex problems: An Ability to design and conduct experiments, as well as analyze
and interpret data
e. Modern tool usage: An Ability to use current techniques, skills, and modern tools necessary for
computing practice
f. The engineer and society: An Ability to analyze the local and global impact of computing on individuals,
organizations and society
g. Environment and sustainability: An Ability to function effectively as an individual and in teams,
including multidisciplinary to accomplish a common goal
h. Ethics: To understand professional, ethical, legal, security and social issues and responsibilities
i. Individual and team work: To have Knowledge of contemporary issues
j. Communication: An Ability to communicate effectively
k. Project management and finance: An ability to understand Engineering and Management principles and
apply these in individual’s work, as a member and leader in a team, to manage projects
l. Life-long learning: To recognize the need for and an ability to engage in continuing professional
development
Faculty Details
S. No. Name of the Staff Qualification Designation DOJ
1. E.Suresh M.E Assistant Professor 30.06.2014
2. J.V.Bhavithra M.E Assistant Professor 30.06.2014
3. R.Sakthiraj M.E Assistant Professor 22.06.2015
4. K.R.Gokul anand M.E Assistant Professor 06.05.2015
5. K.Abinaya M.E Assistant Professor 06.05.2015
6. N.Mathiyarasi M.E Assistant Professor 22.06.2015
7. R.Vishalakshi M.E Assistant Professor 18.06.2016
8. M.Sathishkumar M.E Assistant Professor 18.06.2016
9. A.Priyasamy M.E Assistant Professor 18.06.2016
10. S.Dinesh M.E Assistant Professor 18.06.2016
11. R.Mahadevan M.E Assistant Professor 18.06.2016
12. V.Rajkumar M.E Assistant Professor 12.06.2017
Department of Electronics and Communication Engineering
Vision
To impart quality technical education in the field of Electronics and Communication Engineering in the
young minds for serving the Society and Industry in a globally challenging environment
Mission
To provide sound technical knowledge on Electronics and Communication Engineering to the students
To prepare the students for working in global challenges existing in the industries
To instill competencies in the students for working in interdisciplinary work culture
To create desire for undertaking lifelong learning and entrepreneurship initiatives
Programme Educational Objectives (PEOs)
I. To educate the students for acquiring sound knowledge in the field of Electronics and
Communication Engineering and interdisciplinary field, so as to meet the needs in the field of
Electronics and Communication industries
II. To provides knowledge and skills for developing new products in the field of Electronics and
communication.
III. To offer excellent academic learning environment in department of Electronics and Communication
for facilitating students to become eminent team players.
IV. To facilitate the students with necessary knowledge in the field of Electronics and Communication
Engineering so as to succeed in competitive examination for pursuing higher studies
V. To exposes the students on professional, ethical and social skills to shape them with leadership
quality for analyzing and solving engineering and social issues
Programme Outcomes (Pos)
a. Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals, and
an engineering specialization to the solution of complex engineering problems.
b. Problem analysis: Identify, formulate, review research literature, and analyze complex engineering
problems reaching substantiated conclusions using first principles of mathematics, natural sciences, and
engineering sciences.
c. Design/development of solutions: Design solutions for complex engineering problems
and design system components or processes that meet the specified needs with appropriate consideration for
the public health and safety, and the cultural, societal, and environmental considerations.
d. Conduct investigations of complex problems: Use research-based knowledge and
research methods including design of experiments, analysis and interpretation of data, and synthesis of the
information to provide valid conclusions.
e. Modern tool usage: Create, select, and apply appropriate techniques, resources, and
modern engineering and IT tools including prediction and modeling to complex engineering activities with
an understanding of the limitations.
f. The engineer and society: Apply reasoning informed by the contextual knowledge to
assess societal, health, safety, legal and cultural issues and the consequent responsibilities
relevant to the professional engineering practice.
g. Environment and sustainability: Understand the impact of the professional engineering solutions in
societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable
development.
h. Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of the
engineering practice.
i. Individual and team work: Function effectively as an individual, and as a member or
leader in diverse teams, and in multidisciplinary settings.
j. Communication: Communicate effectively on complex engineering activities with the engineering
community and with society at large, such as, being able to comprehend and write effective reports and
design documentation, make effective presentations, and give and receive clear instructions.
k. Project management and finance: Demonstrate knowledge and understanding of
the engineering and management principles and apply these to one’s own work, as a
member and leader in a team, to manage projects and in multidisciplinary environments.
l. Life-long learning: Recognize the need for, and have the preparation and ability to
engage in independent and life-long learning in the broadest context of technological
change.
Programme Specific Outcomes (PSOs):
m. An ability to explore the skills in electronics domain to get fully involved in system design, not only
in Electronic Circuits, Digital Electronics, Microprocessors, Embedded Systems, VLSI Design and
Digital Signal Processing but also in modern cutting edge technologies in Electronics field
n. An ability to explore the skills in Analog and Digital Communication domain to become proficient
in a complex Communication System and in recent cutting edge technologies in communication
field.
Faculty Details
S. No. Name of the Staff Qualification Designation DOJ
1. Dr.S.Anbukaruppusamy Ph.D Prof. & HOD 15.05.2015
2. Dr.G.Prakash Ph.D Professor 09.05.2014
3. Dr.N.Nandhagopal Ph.D Associate Professor 14.06.2016
4. L.Bharathi M.Tech.
Assistant Professor 14.06.2012
5. R.Puspavathi M.E
Assistant Professor 12.12.2012
6. P.Malini M.E
Assistant Professor 20.01.2014
7. M.Srinivasan M.E.
Assistant Professor 15.06.2014
8. N.Sakthivel M.E
Assistant Professor 01.07.2013
9. K.Tamilarasi M.E.
Assistant Professor 01.06.2009
10. A.Vasantharaj M.E.
Assistant Professor 30.06.2014
11. K.Raja M.E.
Assistant Professor 06.06.2014
12. D.Viji M.Tech.,
Assistant Professor 01.06.2013
13. M.Prakash M.E
Assistant Professor 01.06.2012
14. M.Tamilarasi M.E
Assistant Professor 14.06.2012
15. S.Sureshkannan M.E
Assistant Professor 07.07.2014
16. N. Rajagopala Krishnan M.E
Assistant Professor 01.07.2013
17. M. Ramesh M.E
Assistant Professor 01.07.2013
18. A.Anitharani M.E
Assistant Professor 01.07..201
3
19. A. Jagadeeswaran M.E
Assistant Professor 01.07.2013
20. P.SaravanaPrasad M.E
Assistant Professor 01.07.2013
21. K.Kodeeswari M.E
Assistant Professor 05.07.2013
22. P.Narmatha M.E
Assistant Professor 07.07.2014
23. K.Supriya M.E
Assistant Professor 01.06.2015
24. MintuPhlip M.E
Assistant Professor 21.05.2014
25. R.Kandasamy M.E
Assistant Professor 15.06.2016
26. S.Theivanayaki M.E
Assistant Professor 11.06.2015
27. R.Kanagaraj M.E
Assistant Professor 04.07.2016
Department of Mechanical Engineering
Vision
To create competitive man power in the field of Mechanical Engineering, for the advantage of mankind
Mission
To create a conducive learning environment to make students as competent engineers.
To nurture the entrepreneurial ability among students.
To maintain sustainable development for creative learning to serve the engineering society.
To inculcate human values and sensitivity.
Programme Educational Objectives (PEO’s)
I. Have a sound knowledge in mathematical and mechanical engineering aspects for solving
engineering problems.
II. Expertise in the areas of design, thermal, materials and manufacturing.
III. Practice their profession with good communication, leadership, ethics and social responsibility.
Programme Outcomes (PO’s)
a. Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals, and
an engineering specialization to the solution of complex engineering problems.
b. Problem analysis: Identify, formulate, review research literature, and analyze complex engineering
problems reaching substantiated conclusions using first principles of mathematics, natural sciences, and
engineering sciences.
c. Design/development of solutions: Design solutions for complex engineering problems and design system
components or processes that meet the specified needs with appropriate consideration for the public health
and safety, and the cultural, societal, and environmental considerations.
d. Conduct investigations of complex problems: Use research-based knowledge and research methods
including design of experiments, analysis and interpretation of data, and synthesis of the information to
provide valid conclusions.
e. Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern engineering
and IT tools including prediction and modeling to complex engineering activities with an understanding of
the limitations.
f. The engineer and society: Apply reasoning informed by the contextual knowledge to assess societal,
health, safety, legal and cultural issues and the consequent responsibilities relevant to the professional
engineering practice.
g. Environment and sustainability: Understand the impact of the professional engineering solutions in
societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable
development.
h. Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of the
engineering practice.
i. Individual and team work: Function effectively as an individual, and as a member or leader in diverse
teams, and in multidisciplinary settings.
j. Communication: Communicate effectively on complex engineering activities with the engineering
community and with society at large, such as, being able to comprehend and write effective reports and
design documentation, make effective presentations, and give and receive clear instructions.
k. Project management and finance: Demonstrate knowledge and understanding of the engineering and
management principles and apply these to one’s own work, as a member and leader in a team, to manage
projects and in multidisciplinary environments.
l. Life-long learning: Recognize the need for, and have the preparation and ability to engage in independent
and life-long learning in the broadest context of technological change.
Programme Specific Outcomes (PSOs)
PSO: 1. Ability to apply their knowledge to design and analysis by using software tools.
PSO: 2. Engage them professionally in industries or as entrepreneurs in the field of manufacturing and
design
Faculty Details
S. No. Name of the Staff Qualification Designation DOJ
1. Dr. V. K.
Shunmughanaathan Ph.D Professor & Principal 14.05.2014
2. Dr.G.Nallakumarasamy Ph.D Professor & Head 03.06.2013
3. Dr.M.Murugan Ph.D Professor 29.05.2015
4. Mr.P.S.Saravanan M.E Assistant Professor 03.06.2014
5. Mr.S.Ranjithkumar M.E Assistant Professor 03.06.2014
6. Mr. M. Srikanth M.E Assistant Professor 23.05.2014
7. Mr.K.Boopathy M.E Assistant Professor 01.08.2014
8. Mr.G.Ramamoorthi M.E Assistant Professor 01.07.2013
9. Mr. M.S. Tamilarasan M.E Assistant Professor 14.05.2014
10. Mr. N. Tamilselvan M.E Assistant Professor 16.06.2010
11. Mr.J.Sathis M.E Assistant Professor 14.05.2014
12. Mr. K. Yuvaraj(Bhavani) M.E Assistant Professor 05.08.2013
13. Mr. V. Sathish kumar M.E Assistant Professor 16.08.2010
14. Mr. S.S. Jayaraman M.E Assistant Professor 14.06.2010
15. Mr. S. Nirmal Kumar M.E Assistant Professor 23.05.2011
16. Mr. S. L. Vimal M.E Assistant Professor 23.05.2011
17. Mr.P.Gopinath M.E Assistant Professor 30.06.2014
18. Mr.K.Yuvaraj (Pallipalayam) M.E Assistant Professor 01.07.2013
19. Mr.V.Shantha Moorthy M.E Assistant Professor 01.07.2013
20. Mr. D. Alagesan M.E Assistant Professor 18.06.2014
21. Mr.P.Jagadeeshwaran M.E Assistant Professor 21.07.2014
22. Mr.M.Pradeep M.E Assistant Professor 15.06.2015
23. Mr.P.Praveen M.E Assistant Professor 15.06.2015
24. Mr.P.Nithyanand M.E Assistant Professor 15.06.2015
25. Mr.V.Karthikeyan M.E Assistant Professor 18.06.2015
26. Mr.R.Udaiyakumar M.E Assistant Professor 22.06.2015
27. Mr. B. B. Ganesh Kumar M.E Assistant Professor 22.06.2016
28. Mr.S.Sridhar M.E Assistant Professor 04.07.2016
29. Mr.S.Manijothi M.E Assistant Professor 20.07.2016
Department of Science and Humanities
Faculty List
S. No. Name of the Staff Qualification Designation DOJ
1. Dr.K.Sakthivel M.Sc.,M.Phil, Ph.D Professor & Head 28.06.2014
2. Dr.T.R.Vijayan M.Sc.,M.Phil, Ph.D Professor 01.06.2016
3. Prof.U.Krishnasamy M.Sc.,M.Phil Professor 18.01.2016
4. Mrs.O.R.Lalitha M.Sc.,B.Ed., M.Phil Assistant Professor 31.08.2007
5. Mr.P.Sakthi M.Sc.,M.Phil Assistant Professor 02.07.2012
6. Mrs.P.Sudha M.Sc.,M.Phil Assistant Professor 21.07.2014
7. Mr.M.Murugesan M.Sc.,B.Ed., M.Phil Assistant Professor 06.07.2015
8. Ms.Anupriya M.Sc.,M.Phil Assistant Professor 12.08.2015
9. Ms.S.P.Suganya M.Sc.,B.Ed.,M.Phil Assistant Professor 01.09.2015
10. Ms.M.Pavithra M.Sc.,M.Phil Assistant Professor 08.02.2016
11. Ms.K.S.Nandhini M.Sc.,M.Phil Assistant Professor 25.06.2016
12. Ms.S.Priya M.Sc.,B.Ed., M.Phil Assistant Professor 13.07.2016
13. Mrs.S.Kavitha M.Sc.,M.Phil Assistant Professor 12.07.2017
14. Ms.A.Yamunadevi M. Sc., Assistant Professor 13.07.2015
15. Ms.Krishnaveni M.Sc., M. Ed., Assistant Professor 26.06.2015
16. Ms.M.Caroline M.Sc., M.Phil., M.Ed., Assistant Professor 30.08.2017
17. Mr.Mohanasundaram M.Sc., M.Phil., M.Ed., Associate Professor 01.12.2017
18. Ms.K.S.Yuvarani M.A. B.Ed., M. Phil., Assistant Professor 15.07.2014
19. Mr.D.Gurubatham M.A. M. Phil., Assistant Professor 02.01.2014
20. Ms.T.J.Thilagavathi M.A. M. Phil., Assistant Professor 22.06.2012
21. Mrs.K.Gayathiri M.A., M.A. B.Ed., Assistant Professor 22.04.2015
22. Mr.T.Prakash M.A. B.Ed., M.Phil., Assistant Professor 08.02.2016
23. Dr.K.Boobalan M.Sc., Ph.D Assistant Professor 06.07.2015
24. Mr.C.P.Sureshkumar M.Sc.,M.Tech Assistant Professor 24.04.2015
25. Mr.M.Rajkumar M.Sc.,M.Phil Assistant Professor 25.06.2016
26. Mr.P.Gunasekaran M.Sc.,M.Phil Assistant Professor 05.08.2013
27. Mrs.R.Dhanam M.Sc., M.Phil Assistant Professor 05.12.2016
28. Ms.K.Pranya M.Sc., M.Phil., Assistant Professor 12.07.2017
29. Dr.M.Palanisamy M.Sc., Ph.D Professor 24.04.2015
30. Mrs.J.Kavtiha M.Sc.,M.Phil Assistant Professor 25.06.2016
31. Dr.K.Narayanan M.Sc., M. Phil., Ph.D Assistant Professor 20.07.2016
32. Mr.P.Durairaj M.Sc.,M.Phil Assistant Professor 21.07.2016
33. Dr.N.Venkatachalam M.Sc.,Ph.D Assistant Professor 12.07.2017
34. Dr.Mahalakshmi M.Phil., Ph.D Associate Professor 12.07.2014
35. Dr.C.Renugadevi M.Sc., Ph.D Assistant Professor 07.21.2014
36. Mr.R.Rajarajan M.E(EEE) Assistant Professor 22.06.2011
37. Mr.P.Magudeeswaran M. E (E.E.E) Assistant Professor 25.06.2016
38. Mr.S.S.Premanand M.E.(ICE) Assistant Professor 20.07.2016
39. Ms.MohanaPriya M.E. (P.E.D) Assistant Professor 11.11.2017
40. Mr.A.Premkumar M.E. (P.E) Assistant Professor 17.01.2018
41. Ms.Jeevitha M.E. (P.E.D) Assistant Professor 17.01.2018
Students’ Achievements
The college strongly believes in creating industry ready and world-class engineers. We project our
students first in every occasion possible. Our Students are encouraged to participate in various academic
activities like paper presentation in national level technical symposiums and workshops. 655 students
participated in various events and 83 students won the prizes.
S.N
o Activities No of Participants
1 Paper Presentation in National Level Technical Symposium 126
2 Participation in Workshops, Quiz, Debugging, Project Exhibition and other
Events 465
3 Paper Presentation in International/National Conference 64
Prizes won: 83
Events AER
O CSE ECE
MEC
H
CIVI
L
TOT
AL
Papers Presented in National Level Technical Symposium 2 2 5 3 13 25
Prizes won by our students in Technical Events 15 38 - 1 4 58
University Rank Holders
Ms.Fathima Fershana of B.E Aeronautical Engineering has secured 11th Rank in Anna University
Examination with a CGPA of 8.67.
Mr. Souvik Brahma Hota of B.E Aeronautical Engineering has secured 43rd rank with 8.23 CGPA
in Anna University Examination.
Ms.S.K.Deepa Priya of B.E Aeronautical Engineering has secured 49th Rank in Anna University
Examination with a CGPA of 8.17.
No. of University Ranks secured
S. No. Branch No. of
Ranks
1 B.E Aeronautical Engineering 3
Publication by Faculty Members
S.
No. Activities Total
1 Papers published in National / International Journals 96
2 Paper Presentation in National/ International Level Conferences 50
3. Participation in FDP / Workshops 191
Motivational Initiatives for Students
The Management has instituted academic proficiency awards for the faculty members and students.
1. Best outgoing students (BOG) will be awarded.
2. Students who obtain 100% attendance are awarded with ‘Certificate of Appreciation’.
3. Students who get university rank receive a Certificate of Appreciation and Award.
4. Students who get first rank in their class are appreciated with a Certificate and Award.
Motivational Initiatives for Faculty Members
1. Above 85% result produced by faculty members are appreciated with Certificate and Cash Prizes.
2. On duty facility is offered for faculty members who are doing higher studies.
3. 50% of registration fee are provided for attending Faculty Development Program, Seminars,
Conferences, Workshops, etc.,
4. Promotions are offered whenever the faculty member becomes eligible for higher post and if a vacancy
arises.
Faculty Development Program
S.No. Project Title Chief Guest Duration
1. National Seminar on significance of cyber
Security in information Technology
Dr.Sowdarajan, ASP/IT, PSG
College of Technology
20/06/2017 to
21/06/2017
2. FDP on CS6301 – Programming and Data
Structure II
Dr.S.Soundarrajan, ASP/CSE,
BIT- Sathy
28/05/2017 to
03/06/2017
3. ICTACT FDP on Introduction to J2SE Mr.M.P.Jegadeesan, Trainer-ICT
Academy
14-03-2017 to
15-03-2017
4. FDP on Electronics
Circuits II
Dr.S.Sevaraj
Asso.Professor
P.S.G. College of Technology,
Coimbatore
4.10.2017 to
10.10.2017
5. FDP on Foundation program in ICT for
Education
Prof.Deepak B.Phatak
Project and Course Coordinator
IIT Bombay
03.08.2017 to
07.09.2017
6.
Two weeks ISTE main workshop on
“CMOS mixed signal and radio frequency
VLSI design”
Prof.T.K.Bhattacharya ,
Prof.Indrajit chakrabarthi ,
Dr.Mrigank Sharad from
Department of electronics and
electrical communication
Engineering, IIT Kharagpur.
30.1.2017 to
4.2.2017
In-house Training for Faculty Members
A Faculty Enrichment Program was conducted on 8th & 9th May 2017 at Excel Campus by the
Principals, HODs and senior faculty members.
A Faculty Refreshment program was conducted for all the faculty members from December 11th to
14th, 2017 by Mr.S.Shivaram, Mr.Prince, Mr.G.Raaja & Dr.E.RamGanesh.
A Webinar on MIMO Wireless System design for 5G, LTE and WLAN in MATLAB was
conducted on 23.01.2018 by IIT Remote Center.
A Webinar on Introduction to Machine Learning was conducted on 16.12.2017 and 17.12.2017 by
IIT Remote Center.
A Webinar on FPGA implementation of an LTE receiver design was conducted on 25.10.2016 by
IIT Remote Center.
A Webinar on Fossee Scilab was conducted on 12.09.2017 by IIT Remote Center.
ICTACT FDP on “Introduction to J2SE” was held from 14.03.17 to 15.03.17 in our college and the
following faculty members were benefited: Mr. M.P. Thiruvenkatasuresh, Mrs. P. Kumari,
Dr.K.Geetha, Mr. S. Prabagar, Mr. K.G.Arunkumar, N.Naveen, Mr.D.Vaduganathan and Mr.A.Suresh
Kumar.
Faculty Enrichment Program was held from 12.02.16 to 14.12.16 in our college and the following
faculty members were benefited: Mrs. C.Sharmila and Mr. T.Arun Kumar, Mr.A.Suresh Kumar.
National Conference on “a survey on subspace clustering for value decomposition” was held on
01.04.16 to 02.04.16 at Excel College of Engineering & Technology. Mr.P.Thiyagarajan has attended
the conference.
FDP on IBM Bluemix was held on 27.01.16 to 28.01.16 in our college, and Mr.P.Thiyagarajan has
attended the FDP.
Faculty Orientation Program was conducted from 23.06.16 to 25.06.16 in our college, and the
following faculty members were benefited, Mr.P.Thiyagarajan and Mr.A.Suresh Kumar.
Use of ICT in Education for Online and Blended Learning program was organized from 02.05.16
to 10.07.16 in our college.
CSIR sponsored 2 Days National Seminar on “Significance of Cyber security in IT” was organized
from 20-6-2017 to 21-06-2017 in our college.
FDTP on "CS 6301 Programming and Data Structures II" was organized from 28-05-2017 to 03-
06-2017 in our college.
Webinar on “Introduction to Machine Learning” was conducted from 16.12.2017 to 17.12.2017 by
IIT Remote Center of Excel Engineering College for the benefit of faculty and students and the
following faculty members were participated actively: Mr.G.Nallakumarasamy,
Mr.M.S.Tamilarasan, Mr.V.Karthikeyan, Mr.K.Yuvaraj (B) Mr.S.Sridhar.
Webinar on “Program on Smart India Hackathon by AICTE” was conducted from 16.12.2017 to
17.12.2017 by IIT Remote Center of Excel Engineering College for the benefit of faculty and students.
Mr. K.Yuvaraj, Mr.V.Shanthamoorthy, Mr.R.Udaiyakumar, Mr.S.Manijothi were participated
actively.
Participation of Faculty in other college Technical Programmes
Dr.S.Christian Johnson has been recognized and attended as Secretary in one of the ongoing
International Technical brochure works as “Detection, Prevention and Renovation of overhead
line Installation” across the world, CIGRE technical Symposium in Trinity College, Dublin,
Ireland.
Dr.P.Subramanian has been distinguished as chief guest and resource person for the seminar on
Engineering Geology conducted on 13.102017 at Aishwarya College of Engineering and
Technology, Erode.
Mr.S.M.Sakthivel and Mr. R.Krishnasamy have presented paper in International Conference at
CBIP, New Delhi on 22nd & 23rd June 2017.
Mr. M.P. Thiruvenkatasuresh, Dr.K.Geetha and Mrs. C.Sharmila have attended the FDP On
"Introduction to Big Data Analytics" on 19.10.16 and 20.10.16 at Kongu Engineering College,
Perundurai.
Dr.L.Kartheesan, Mr.M.P.Thiruvenkatasuresh, Mrs.P.Kumari, Dr.J.NirmalaDevi, Dr.K.Geetha, Mr.
S. Prabagar, Mr. K.G.Arunkumar, Mr. A.Alagar and Mrs. C.Sharmila have attended CSI’s 51st
National Level Convention from 23.01.17 to 25.01.17 at Lemeridian, Coimbatore.
Mrs.P.Kumari and Dr.J.NirmalaDevi have attended FDP on "Compiler Design" on 15.12.16 and
16.12.16 at KSR Institute of Engineering and Technology.
Mrs.P.Kumari, Dr.J.NirmalaDevi and Dr.K.Geetha have attended the FDP on "Internet of Things”
at Coimbatore Institute of Technology on 17.12.16 and 18.12.16.
Mrs.P.Kumari has attended a National Conference on Emerging trends in Engineering and
Technology at Nandha College of Technology on 17.03.17
Mrs.P.Kumari has attended a 7 day FDP on “CS 6503 Theory of Computation” organized by Anna
University, Coimbatore.
Dr.J.NirmalaDevi has attended a seminar on IPR Procedures & Best Practices from 03.05.17 to
06.05.17 at CITR Anna University , Chennai.
Mr.K.G.Arunkumar and Mr.P.Mohanraj have attended a5 day FDP by ICTACADMY - "Java
Fundamentals” from 18.07.16 to 22.07.16 at Paavai Engineering College.
Mr.A.Alagar, Mr.P.Dinesh Kumar and Mr.P.Mohanraj have participated in a National Conference on
Electrical Civil Mechanical Communication System – 2017 on 24.02.17 at Dr.Nagarathinam’s
College of Engineering.
ICTACT FDP on “Introduction to PHP” has been attended by Mr.A.Alagar and Mr.P.Dinesh
Kumar on 12.12.16 to 13.12.16 at Sri Shanmuga College of Engineering and Technology.
Mr.P.Mohanraj has participated in an International Conference on “Operating System Security
“in Sastra University on 17.03.17 & 18.03.17.
Mr.P.Mohanraj has attended ICTACT FDP On "Java Fundamentals" conducted by Paavai
Engineering College from 18.07.16 to 22.07.16.
Mr.P.Dinesh Kumar and Mr.P.Thiyagarajan have attended ICTACT FDP on “Introduction to PHP
programming” from 12.12.16 to 13.12.16 at Sri Shanmuga College of Engg and Technology.
Mr.N.Naveen and Mr.V.Surendhiran have attended ICTACT FDP on “Teaching Techniques” from
25.07.16 to 26.07.16 at KSR College of Arts & Science.
Mr.S.S.Karthik Kumar, Mr.T.Arun Kumar and Mr.E.Deepankumar have attended a One day
Seminar on Smart Climate change using Big Data , Cloud & IOT on 17.12.16 by Kongu
Engineering College, Perundurai.
Mr.E.Deepankumar, Mr.T.ArunKumar, Mr.A.SureshKumar and Mr.D.Vaduganathan have attended
ICTACT FDP on "Introduction to R programming” from 30.11.16. To 01.12.16 at KSR College
of Technology.
Mr.T.Arun Kumar and Mr.P.Thiyagarajan have attended a ICTACT FDP "Introduction to PHP”
from 08.07.16 to 09.07.16 at Mahendra Engineering College.
Mr.E.Deepankumar and Mr.T.Arun Kumar have attended ICTACT FDP On "Introduction to R
programming" on 30.11.2016 to 1.12.2016 at KSR College Of Technology.
Mr.P.Thiyagarajan has participated in International conference on “An analysis of online public
utilities monitoring and android application” from 30.03.17 & 31.03.17 at Muthyammal
Engineering College.
Mr.D.Vaduganathan and Mr.A.Suresh Kumar have attended FDP on “Database Design and
Programming with SQL” from 21.11.16 to 25.11.16 at Sona College of Technology, Salem.
Dr.K.Geetha, and Mrs.S.Santhakumari have attended a FDP on “Python Programming” from 31-
07-2017 to 02-08-2017 at KSRIET, Tiruchengodu.
Mrs.P.Kumari has attended ICTACT FDP on “Introduction to Bigdata Analytics” from 09-08-
2017 to 10-08-2017 at Jayaram Engineering College.
Dr.K.Geetha has attended a Workshop on ‘application of Artificial Intelligence in Cyber Crime’
from 23-08-2017 to 24-08-2017 at Nandha Engineering College.
Mr.S.Prabagar has attended FDP on “Internet Programming” from 22-05-2017 to 28-05-2017 at
University College of Engineering, Dindugal.
Mr.K.G.Arunkumar and Mr.P.Mohanraj have attended ICTACT FDP on “Emotional Intelligence”
from 17-08-2017 to 18-08-2017 at KSR College of Arts & Science.
Mr.N.Naveen and Mr.P.Dineshkumar have attended FDP on Decision Making Skills from 14-07-
2017 to 15-07-2017 at Vivekananda Institute of Information and Management Studies
Mr.S.S.KarthikKumar has attended FDP on “Android Application Development” from 17.05.2017
to 18.05.2017 at Erode Sengunthar College, Thudupathi.
A Workshop on “application of Artificial Intelligence” in Cyber Crime has been attended by Mrs
.C.Sharmila from 23-08-2017 to 24-08-2017 at Nandha Engineering College.
A National Workshop on Medical Image analysis and Detection Techniques with advanced
Algorithm has been attended by Mrs.C.Sharmila from 14-07-2017 to 15-07-2017 at
Kongu Engineering College.
ICTACT FDP on “Introduction to cloud Infrastructures and services” was attended by
Mr.D.Vaduganathan and Mr.P.Dineshkumar from 21-08-2017 to 22-08-2017 at Vellalar College of
Engineering and Technology.
ICTACT FDP on “Introduction to cloud Infrastructures and services” was attended by
Mr.D.Vaduganathan and Mr.M.Muthukumar from 21-08-2017 to 22-08-2017 at Vellalar College of
Engineering and Technology.
Mr.G.Ramamoorthi has undergone one week Short term course on “Emerging Applications In
Mechatronics And Automation” from 08.01.2018 to 13.01.2018 at TKM College of Engineering ,
kollam, kerala.
Mr.J.Sathis has participated in the workshop on “Micro Machining And Its Optimization” from
04.01.2018 & 05.01.2018 at Sona College of Technology, Salem.
Mr.K.Boopathi has attended a Seminar on “Design of Experiments In Bioprocess Optimization”
from 04.01.2018 to 06.01.2018 at K.S.R College of Technology, Trichengode.
Mr.V.Karthikeyan has participated in the One day workshop on “The Art of Writing Research
Paper” on 02.01.2018 at Kongu Engineering College, Erode.
Mr.K.Yuvaraj has undergone a Short term course on “Advances In Composite Materials” from
06.12.2018 to 12.12.2018 at Coimbatore Institute of Technology, Coimbatore.
Mr.R.Rajarajan has undergone a Short term course on “Recent Advancements in Clean Energy
Technologies for Future Energy Needs” from 15.12.2017 to 16.12.2017 at Kongu Engineering
College, Erode.
Mr.N.Tamilselvan has undergone a Short term course on “Advance Machine Learning
Techniques for Manufacturing Optimization” from 14.12.2017 to 20.12.2017 at Thiagarajar
College of Engineering, Madurai.
Dr.G.Nallakumarasamy has undergone a Short term course on “Advances in Refrigeration and
Air Conditioning” from 11.12.2017 to 15.12.2017 at Pondicherry Engineering College.
Mr.R.Udhayakumar has participated in the FDP on ’’Applications of computational fluid
dynamics’’ from 27.11.2017 to 09.12.2017at Sri Krishna college of technology.
Mr.K.Yuvaraj has attended the FDP on “Entrepreneurship” from 13.11.2017 to 25.11.2017 at
Kongu Engineering College, Erode.
Mr.K.Boopathy & Mr. S.S.Jayaraman have participated in the Workshop on “tooling, machining
and CNC programming” from 22.08.2017 to 23.08.2017 at Bannariamman Institute of
Technology.
Mr.K.Boopathy & V.Sathiskumar has attended the Seminar on “modern HVAC systems for
nearly zero energy builders” on 22.07.2017 at Velalar college of Engineering and Technology,
Erode.
Mr.S.Sridhar has attended the Workshop on “Design and Development of ATV” from 13.7.2017 to
15.07.2017 at Sona college of technology, salem.
Mr.V.Karthikeyan has attended the FDP on “Decision making skills” from 14.07.2017 to
15.07.2017 at Vivekananda Institute of Information & Management studies Namakkal.
Mr.S.Manijothi has undergone a Short term course on “Calibration of Vernier instruments &
limit gauges” from 13.02.2017 to 17.02.2017 at Foremen Training Institute , Bangalore.
Mr.P.Jagadeeshwaran & Mr.R.Udaiyakumar have participated in the Workshop on “Current
research scenarios energy , environment and chemical engineering” from 30.01.2017 to
04.02.2017 at National Institute of technology ,Trichy.
Dr.G.Nallakumarasamy & Mr.N.Tamilselvan have attended Workshop on “Tribology In Design”
from 07.11.2016 to 12.11.2016 at Indian Institute of Technology, Madras.
Dr.G.Nallakumarasamy has participated in a Seminar on “Indian technology congress” from
01.12.2016 to 02.12.2016 at Bangalore.
Mr.V.Karthikeyan has attended a Seminar on “fuel use of ethanol blended petrol E(85 )as an
Alternative fuel to counter rapid repletion” from 16.12.2016 to 17.12.2016 at KSR Institute For
Engineering And Technology.
Mr.V.Karthikeyan has participated in a Seminar on “Thermal engineering” from 13.12.2016 to
15.12.2016 at KSR INSTITUTE FOR ENGINEERING AND TECHNOLOGY.
Mr.K.Boopathy & Mr.S.S.Jayaraman have attended a Seminar on “Processing and mechanical
behavior of Nano composite materials for aerospace structures” from 15.12.2016 to 16.12.2016
at SNS College Of Technology, Coimbatore.
Dr.G.Nallakumarasamy and Mr.N.Tamilselvan have attended Seminar on “Heat transfer studies on
plate type heat exchanger using non Newtonian fluid” on 22.05.2016 at National Institute for
Engineering and Research, Pune.
Dr.G.Nallakumarasamy has attended a Seminar on “Reliability analysis of diesel engine injector
nozzle” from 01.02.2016 to 02.02.2016 at Hindustan college of engineering and technology.
Mr.N.Tamilselvan has participated in a Seminar on “Performance analysis of plate type heat
exchanger using non Newtonian fluid” on 12.04.2016 at Vidhya Vikas college engineering and
technology.
Mr. P.Gobinath has participated in a Seminar on “Fabrication meat cutting machine” on
02.04.2016 at Kavery Engineering College
Mr.K.Boopathy has attended a Seminar on “Solar parabolic through air heater” on 01.04.2016 at
Nandha Engineering College.
Mr.K.Boopathy has participated in a Seminar on “Optimization of milling fixture layout using
shuffled program leaping algorithm” from 01.02.2016 to 02.02.2016 at Hindustan college of
engineering and technology.
Mr.S.Nirmal Kumar has attended the FDP on “Design fabrication and analysis of energy storage
of phase changing materials with heat exchanger” on 07.05.2016 at Al-Ameen Engineering
College.
Mr.V.Karthikeyan has attended the FDP on “Publishing research articles for and applying for
research grants /IPR” on 29.01.2016 at Knowledge Institute of Technology.
Mr.V.Karthikeyan has participated in the WORKSHOP on “Internal combustion engine” on
04.05.2016 at Jayaram College Of Engineering and Technology.
Mr.P.Jagadeeshwaran has attended the WORKSHOP on “Fabrication of three axis hydraulic
modern trailer” on 02.04.2016 at Kavery Engineering College.
Mr.P.Jagadeeshwaran & Mr.V.Shanthamoorthy have participated in the WORKSHOP on
“Optimization of milling fixture layout using shuffled program leaping algorithm” from
01.02.2016 to 02.02.2016 Hindustan college of engineering and technology.
Mr.S.Ranjithkumar & Mr.K.Yuvaraj(P) has attended WORKSHOP on “Optimization of milling
fixture layout using shuffled program leaping algorithm” from 01.02.2016 to 02.02.2016 at
Hindustan college of engineering and technology.
Mr.V.Shanthamoorthy has participated Workshop on “Water Hyacinth Harvester” on 13.04.2016
at Vinayaka Missions University.
Mr.S.S.Jayaraman has attended Workshop on “Loud speaker driven thread thermo acoustic
refrigeration” on 31.03.2016 at Jyothi engineering college.
Mr.S.S.Jayaraman has participated FDP on “Sustainable Bio-Energy Resources” on 22.02.2016 at
PSG College Of Technology.
Mr.P.Jagadeeshwaran, Mr. V.Karthikeyan & Mr. R. Udaiyakumar have attended the FDP on
“Materials Characterization for High Temperature Application (MCHTA’16)” from
08.03.2016 & 09.03.2016 at Anna University Thiruchirappalli.
Dr.K.Sakthivel participated in CSIR sponsored National level Seminar conducted by Erode
Sengunthar Engineering College Perundurai on 22.12.2017 and 23.12.2017,
Dr.K.Sakthivel has participated in CSIR sponsored National level workshop conducted by K.S.R.
College of Arts and Science for women-Tiruchengode on 27.12.2017.
Dr.T.R.Vijayan has presented a Paper on Fuzzy Subring Generated by a Fuzzy subset in National
level Seminar conducted by Sengunthar Arts and Science College Tiruchengode on 30.09.2016,and
presented two papers titled “A Study on derivations in Gamma Near Rings” and “ Fuzzy Ideals
and Homomorphism”.
Dr.T.R.Vijayan has presented a paper on Fuzzy Ideals and Homomorphism in National level
Seminar conducted by Padmavani Arts and Science College Salem on 01.09.2017.
Dr.T.R.Vijayan has participated in CSIR sponsored National level Seminar conducted by Erode
Sengunthar Engineering College Perundurai on 22.12.2017 & 23.12.2017.
Dr.T.R.Vijayan has participated CSIR sponsored National level workshop conducted by K.S.R.
College of Arts and Science for women-Tiruchengode on 27.12.2017.
MS.S.kavitha has presented a paper on Oscillatory behavior of second order Neutral difference
equations with mixed Neutral term in CSIR sponsored She has participated in CSIR sponsored
National level Seminar conducted by Erode Sengunthar Engineering College, Perundurai on
22.12.2017 & 23.12.2017.
MS.S.kavitha has participated in CSIR sponsored National level workshop conducted by K.S.R.
College of Arts and Science for women-Tiruchengode on 27.12.2017.
Dr.K.Boobalan has attended a National Conference in K S R Arts and Science college in
Tiruchengode on 16.12.2016 & 17.12.2016.
Dr.K.Boobalan and Dr.K.Narayanan have participated in a FDP at Karunya University Coimbatore
on 16.11.2016
Ms . Priya has participated in workshop in Sri Vasavi Arts and Science college Erode on
12.12.2016 & 14.12.2016
Ms. A. Yamunadevi has attended the FDP in Anna University Chennai from 17.06.2016 to
23.06.2016.
Mr.P.Durairaj, Dr.K. Mahalakshmi and Dr.N.Venkatachalam have participated in Foundation
programme in ICT for education from 20.08.2017 to 13.09.2017 conducted by IIT BOMBAY.
Ms. N.Pavithra has participated in the Workshop conducted by Sri Vasavi Arts and Science
College, Erode from 12.12.2016 to 14.12.2016.
Dr.K.Narayanan has published an article titled Synthesis characterization and anti proliferative
and apoptosis inducing effects of novel striazine derivatives on 01.09.2017 in New Journal of
chemistry, Royal society of chemistry – vol-42, issue 3, sep 2016.
Ms.P.Sudha has participated in CSIR Sponsored National Seminar in Erode Sengunthar
Engineering College, perundurai, from 22.12.2017 to 23.12.2017.
Ms. P.Sakthi and Ms.Krishnaveni have participated in National seminar at sengunthar Arts and
science college, Triuchandoge on 02.02.2018.
Book Publication by Faculty
S.No Name of the
Faculty Title Publication Details
1 Dr.K.Geetha Computer Networks Bonfring, Coimbatore
2 Dr.K.Geetha Investigation on Novel Based Bio-Inspired
Algorithms in MANET Routing
Lambert Academic
Publishing
3 Dr. J.Nirmaladevi Python Programming Sai Publications Erode
4
Dr. J.Nirmaladevi
&
Dr.K.Geetha
Programming and Data structures II SCM Publishers
5 Dr.K.Geetha An Enhanced ABR Routing with trust to
mitigate Network attacks
Lambert Academic
Publishing
6 Dr.D.Devakumar Elements of Aeronautics Research India Publication
7 S.P.Venkatesan Engineering Mechanics JBR TRI SEA Publisher.
8 Dr.S.Christian
Johnson Mechanics of solids
ISBN: 9789385983085, SCI
TECH Publisher
9 Dr.S.Christian
Johnson Strength of materials Chess Educational publisher.
10 Dr.S.Christian
Johnson Composite Materials Excel Publications
11 Dr T R Vijayan Probability and Statistics Gems Publishers.
12 Dr T R Vijayan Numerical Mathematics Gems Publishers.
13 Dr T R Vijayan Statistics and Numerical Mathematics Gems Publishers.
14 Dr T R Vijayan Probability and Random Process Gems Publishers.
15 Dr T R Vijayan Engineering Mathematics-II Gems Publishers
16 Dr T R Vijayan Probability and Queuing Theory Gems Publishers
17 Dr T R Vijayan Discrete Mathematics Gems Publishers
18 Dr T R Vijayan Engineering Mathematics-I Gems Publishers
19 Dr T R Vijayan Probability and Statistics Gems Publishers.
20 Dr T R Vijayan Transforms and partial Differential
equations Gems Publishers
21 Dr T R Vijayan Engineering Mathematics-I Gems Publishers
22 Dr T R Vijayan Engineering Mathematics-II Gems Publishers
23 P.Gunasekaran Physics Lab Manual SRET
24 M.RAJKUMAR
(Physics) Materials Science Maruthi Publisher
25 Mrs.J.Kavitha
Chemistry Environmental Science & Engineering Maruthi Publisher
26 Mrs.T.J.Thilagavath
i Technical English Charulatha Publication
27 Mrs.K.S.Yuvarani Technical English Charulatha Publication
28 Dr.P.Subramanian Remote Sensing Techniques and GIS Chess Educational Publishers
29 G.Vijayakumar Water Resources & Irriagtion Engineering Sri Krishna Hitech Publishers,
Chennai
30 Dr.S.Christian
Johnson Concrete Technology Ditpi Press (POC) Pvt.Ltd.
31 Dr.S.Christian
Johnson Construction Materials Chess Educational Publishers
32 Dr.S.Christian
Johnson Foundation Engineering
ISN'T Tech Publishers (POC)
Pvt.Ltd.
33 Dr.S.Christian
Johnson Strength of materials Chess Educational Publishers
34 Dr.S.Christian
Johnson Mechanics of solids Scitech Publishers
35 Dr.P.Subramanian Remote Sensing Techniques and GIS Chess Educational Publishers
36 G.Vijayakumar Water Resources & Irriagtion Engineering Sri Krishna Hitech Publishers,
Chennai
37 Dr.S.Christian
Johnson Concrete Technology Ditpi Press (POC) Pvt.Ltd.
38 Dr.S.Christian
Johnson Construction Materials Chess Educational Publishers
39 Dr.S.Christian
Johnson Foundation Engineering
ISN'T Tech Publishers (POC)
Pvt.Ltd.
40 Dr.S.Anbu
karuppusamy Circuit Analysis Maruthi Publishers,
41 Dr.S.Anbu
karuppusamy Electronic Devices Charulatha publications
42 Dr.N.Nandhagopal Circuit Analysis Maruthi Publishers,
Chennai
43 Mr.M.Srinivasan Basic Electrical and
Instrumentation Thakur Publishers
44
Dr.
G.Nallakumarasam
y
& Dr. M.Murugan
Computer integrated
manufacturing
Airwalk Publishers,
Chennai
45
Dr.
G.Nallakumarasam
y
& Dr. M.Murugan
Engineering Thermodynamics Airwalk Publishers,
Chennai
46
Dr.
G.Nallakumarasam
y
& Dr. M.Murugan
Metrology & measurement Airwalk Publishers,
Chennai
47
Dr.
G.Nallakumarasam
y
& Dr. M.Murugan
Manufacturing technology Airwalk Publishers,
Chennai
48 S.Nirmalkumar &
K.Yuvaraj Design of Machine Elements
Airwalk Publishers,
Chennai
Photo Gallery of Various Activities
Interactive Session On “Blockchain Will Disrupt Supply Chain Unlocking The Future Of Blockchain Economy” On 22.12.2017 By
Mr.KARTHIK PICHAI Founder & CEO, Augusta Hitech Soft Solutions
Inaugural Function of ECE Association FROPTRANZ 2K17)
Department of Mechanical Engineering conducted a seminar in the title of
"Product development life cycle in Automobiles" Mr.Duraisamy, Senior
Engineer, Ford Motors PVT Ltd. on 13th February 2016
Inauguration of Astronomy Club
Releasing of Aeronautical Department News Letter and Magazine at the symposium
Presidential Address by Principal at 9th national level technical symposium
Training & Placement Activities
An exclusive well experienced Training and Placement Officer has been appointed to improve the
placement activities and to prepare the students for better placements. From every department, a staff
coordinator and student coordinator interact with the Placement Cell. Weekly two hours are allotted for
discussing and conducting the aptitude test in the class timetable.
Achievements in Extra-curricular activities
Our Students have participated in extra-curricular activities and got many prizes in the university,
district wise and zonal level sports meets conducted at various Engineering colleges and other places
between March 2016 and February 2018.
Ahmed Abdullah Ahamed Muqais of the III year Civil has completed internship training from
20.11.2017 to 23.12.2017 under M/s UNITZ DEZIGNZ for their Apartment Complex Project
successfully in Bangalore.
Computer Science and Engineering Association Inauguration function
conducted on 06.8.2016 for CSE
5th National Conference on Networking Communication Systems –NCS’17 on
04.03.2017
L.Kaileshwera of II year has won Gold medal 6 times at various levels in Boxing and was selected
for Asian games.
V.Anitha princy& C.Rajkumar of third year ECE has presented a paper in Knowledge Institute of
Technology and won third prize on 23rd septemper 2017.
S.Manoj kumar & S.Karthikeyan of third year ECE have presented a paper in Mahendra college of
engineering and won first prize on 07th September 2016
ECE students participated and won second place in the Technical Event “EBIZ” conducted by
women empowerment cell @ kongu Engineering College on 30.01.18
Our student Mr.Sohanur Rahuman has participated in swimming (50 meter freestyle)of Hosur TRI-
SPORTS @2K18 held at Royal Wellfit Health Club, Hosur on 27th of January 2018.
M. Karthika, S. Karthikeyan, S. Manoj Kumar has presented a project titled on” Enhancing Road
Safety Using Vehicle to Vehicle Communication” in excel expo 2018 and got first prize.
Attah Mac-Anthony Ojochegbe, Rajkumar Maity, Ankit Mondal and Mohamed Thahir.V.T has
presented a project titled on” Gesture Control Robot Car” in excel expo 2018 and got second prize.
K.Mohanraj, S.Ajithkumar, S.Sabarimoorthi and R.Murugavel has presented a project titled on” PIR
Sensor” in excel expo 2018 and got third prize.
S.Karthick, M.Karthi and A.Lingeshwaran of III Year Mechanical Engineering have won II Prize in
National level symposium at Mahindra Institute of Technology.
G.Veera Vignesh of Final Year Mechanical Engineering has won II Prize in
the event Short Flim Making at Mahindra Institute of Technology.
S.Shanmugapriyan of Final Year Mechanical Engineering has won Bronze Medal in Boxing at
Salem District Boxing Association, Omalur.
The Paper Presentation on "Cloud Computing” was conducted by SSM College of Engineering on
11.03.2017. B.Kowsalya and M.Priyanka of III yr CSEwon the 2nd prize.
SSM College of Engineering conducted Paper Presentation on “Multimedia on Stress" and the 2nd
prize was bagged by B.Kowsalya and M.Priyanka of III yr CSE.
The First champions state level children's chess tournament has been conducted by Champions chess
academy, Salem & Genius chess club, Salem from 06.08.2016 to 07.08.2016 and 3rd Prize was won
by R.Kanimozhi.
Chess tournament has been conducted by Amaze chess academy on 24.12.2016 and 1st Prize was
won by R.Kanimozhi.
District level chess tournament was conducted by Globs chess academy on 08.01.2017 and
R.Kanimozhi has got 2nd Prize.
District level chess tournament was conducted by V.S.C Chess academy on 22.01.2017and 3rd prize
was won by R.Kanimozhi.
Open chess competition was conducted by VSAA chess academy on 12.02.2017 and 2nd Prize by
R.Kanimozhi.
Erode district chess selection tournament was conducted by Kongu kalvi nilayam, Erode on
04.03.2017 and 1st Prize was won by R.Kanimozhi.
1st Brainy babies state level children's chess tournament was conducted by VSA Group of institution
on 10.06.2017 & 11.06.2017 and 2nd Prize was won by R.Kanimozhi.
District chess tournament was conducted by Praveen chess academy on 30.07.2016 & 31.07.2016,
and R.Kanimozhi has got the first prize.
The event “Treasure hunt” was conducted in the Inter Department Level and the following students
has got the 1st prize Shamsiya T Shamsudheen, Sneha P Sunny, Ashny Devassy, Ardra Lakshmi S,
Keerthivasakan M, Dhivakar S, Gowtham C, and Saranya K P.
“Situation handling” was conducted and Tamilselvi P of CSE Department has won the 2nd prize.
“Minute to try” event was conducted in the Inter Department Level and the 1st prize was won by
Nathiya S, Satheesh Kumar M and Shamsiya T Shamsudheen. The 2nd prize was bagged by
Sowndarya V and Pradeepa M Aditya Bhattachariee, and Alok Kumar. The 3rd prize was won by
Anandha Bhuvaneshwari.B, Indhumathi.L.V.
“Spelling bee” was conducted and 1st place was won by Gayathri G, Ardra Lakshmi S and 2nd prize
was won by Aditya Bhattachariee.
“SMS Typing” was conducted and 2nd prize was bagged by Aditya Bhattachariee, 3rd prize by Arjun
Raj.
“Movie making” was conducted and 1st prize was won by Anandh M, Karthic Kumar A, Satheesh
Kumar M and Satheesh Kumar M. And 3rd prize was won by Karthikeyan V.
“Mad ads” was conducted. 2nd and 3rd prizes was won by Veera Sinnammal.M, Satheesh Kumar M
respectively.
Important Events in EEC
Graduation Day
The sixth Graduation Day Ceremony and Alumni Meet were held on 23.07.2017 at Excel Mini
Auditorium. Shri K.Venugopal, Director, Nettur Technical Foundation, Bangalore and Shri S.Manikandan,
Founder Director of Spero Mobility and Energy Solutions Privated Limited & MD,Milltex Private Ltd.
Coimbatore honoured their presence as the Chief Guest and awarded degree certificates to 311 students.
Around 241 Students are going to be awarded with Degree certificates during the nest graduation
day.
Activities (Technical Symposium, workshops, Guest Lectures, Seminars and Conferences conducted
by our departments)
Department Symposium Conferences Workshops/
Seminars
Guest
Lectures
CSE 3 1 3 6
IT 1 1 2 3
ECE 1 - 4 1
AERO 2 - 7 8
MECH 2 - 4 2
CIVIL 1 - 2 1
Total 9 1 20 18
Ph.D. Degree Awardees
Dr.J.Nirmala Devi, Associate Professor in CSE Department has successfully completed her Ph.D.
thesis entitled “Investigation of deaf speech signal to develop an assistive mechanism for effective
communication” in February 2017.
Ph.D. Thesis Submitted
Mr. S.Prabagar, Mr. P.Senthilkumar and Mr.M.P.Thiruvenkatasuresh Assistant Professors of CSE
Department have submitted their Thesis in Anna University, Chennai.
Mr.L.Bharathi, Mr.A.Vasantharaj, and Mr.M.Srinivasan Assistant Professors of ECE Department
have also submitted their Thesis Successfully.
Luminaries visited
In the academic year 2015-16 and 2016-17 many luminaries visited our college for various technical
events
S.
No. Session chaired University
1 9th National Level Technical Symposium AERISTA2K17 and
Inauguration of ASTRONOMY Club
Dr S.Sethuraman.,
State Seceratary,
Tamilnadu Science Forum
ThiruT.Jayamurugan
President, Tamilnadu Science
Forum Salem District
2 A seminar on 3D Printing by Alpha CADD
Thiru K.VENKATA RAMANA
Branch Manager
AlphaCADD, Chennai
3 A Guest Lecture on CADD software
K.Poorna Priya
Technical Support Engineer,
Penta CAD Erode
4 Leaders Talk on Aero Modeling
Mr Tamilazhagan
Junior Research Fellow
Madras Institute of Technology ,
Chennai
5 Association Inauguration
Mr K.SathiyaMoorthy
Senior Principal Scientist
Propulsion Division
NAL, Bangalore
6 Alumni Interaction on Latest Trends in Software Field
Mr Arjit Das
Baryons Software Solutions
Bangalore
7 Alumni Interaction on Latest Trends in Software Field Saurav Puraksyatha
Esterline Technologies, Bangalore
8 Seminar Mr. Sundararajan.V
HCL technologies
9 Industry Explorer’17
1. Mr. Sundararajan.V
Head Technology Excellence
Group,
Quest Global, Bangalore
2. Mr.S.Boopathy,
General Manager
Accenture Services Limited,
Bengaluru
3. Mr.Chandiran J
Technology Specialist
Honey Well, Bengaluru
10 A Seminar on Opportunities in Design and Development
Industries
Mr.S.Boopathy,
General Manager
Accenture Services Limited,
Bengaluru
11 A Seminar on recent trends in Aerospace Software’s
Mr.Chandiran J
Technology Specialist
Honey Well, Bengaluru
12 A Guest Lecturer on Aircraft Overhauling and Servicing
Procedure
Mr. A.Vivekananthan (Retd)
Junior Warrant Officer
Indian Air force
13 A Guest Lecture on Aircraft Investigation
Mr A.Sabik Nainar (Retd)
Sergeant
Indian Air Force
14 A Quiz Competition on ENGINEERIA for Students CADD Centre
Bhavani
15 Aeromodelling Workshop
Mr. Balakannam
Jet Aerospace
Coimbatore
16 Webinar on system Engineering Dassault System Tech Talk Series
17 Webinar on Digital Manufacturing Dassault System Tech Talk Series
18 ARHAKRZ’16 Association Inauguration
Mr. Sundararajan.V
Head ,Technology Excellence
Group,
Quest Global, Bangalore
19 Inaugural Function of ECE Association
Mr.K.Karunanithi
General manager,
Indo Japan Business head,
HCL Technology, Chennai
20 Workshop on Real Time Embedded Applications
J.Divya & A.V.Hindhu
Application Engineer
Penta Automation,
Erode.
21 Guest lecturer on Advanced Digital Electronics And Its
Application
Mr.G.kumaran
Associate professor
Skp Engineering College
Thiruvannamalai
22 Short term course (FDP) on Electronic Circuits II
Dr.S.Sevaraj
Asso.Professor
P.S.G. College of technology,
Coimbatore.
23 Two Days Hands On Training On VLSI Design Using Open
Source Eda Tool-Aaron
Mr.Ravikumar & Mr.Girish
Sanarys private ltd
Bangalore.560032
24 Three Days Hands on Taining on “Industry Ready Engineers”
Mr.S.Sundramoorthy
Managing Director,
SunShiv Electronics,
Coimbatore
25 Inaugural Function of ECE Association
Mr.Joseph Napoleon
Associate General manager-HR
Schneider Electric,Chennai
26 Guest lecturer on Electrical Engineering and Instrumentation
Dr.M.Elango
Prof/ECE
K.S.R.college of Technology
27 Guest lecturer on Transmission lines and Waveguides
Mr.Veeramani
Prof/ECE
K.S.R.College of Engineering
28 National level Technical symposium
Ms.T.Deepa
Windchill PLM
consultant,Capgemini,Bangalore
29 Guest Lecture on CS6660-Compiler Design Dr.N.Kalaivani, ASP/CSE,
IRTT
30 Guest Lecture On Artificial Intelligence Dr.N.Mahesh, AP (Senior)/CSE,
IRTT
31 Guest Lecture On Advanced Java
Mr. Subramanian. R Managing
Partner Chakrika InfoSolutions,
Pondichery
32 Guest lecture on Career Building Mr. Vijayavenkatesh Periyasamy,
Success Formula , Salem
33 Guest lecture on Software Platforms
Mr. K. Sathishkumar, NLP
Softwrae Engineer, California,
USA
34 Guest lecture on Social Innovation and Start up Culture
Mr. S. Ananth, CEO – Diverse
Brains Life Solutions Pvt. Ltd.,
Chennai
35 Guest lecture on Enterprise Resource Planning Mrs. Malarvizhi, Consultant –
ERP Logic India Pvt. Ltd., Salem
Placement Activities
S. No Date Activity Expert
1. 31.01.2018 to 02.02.2018 Placement Training Six Phrase
Trainers
2. 03.01.2018 to 05.01.2018 Placement Training In-house Trainers
3. 26.12.2017 to 30.12.2017 Placement Training Six Phrase
Trainers
4. 28.08.2017 to 30.08.2017 Placement Training Six Phrase
Trainers
5. 21.08.2017 to 23.08.2017 Placement Training Six Phrase
Trainers
6. 14.06.2017 to 20.06.2017 Placement Training Six Phrase
Trainers
7. 04.01.2017 to 07.01.2017 Placement Training In-house Trainers
8. 27.12.2016 to 04.01.2017 Placement Training Six Phrase
Trainers
9. 11.07.2016 to 16.07.2016 Placement Training Six Phrase
Trainers
10. 18.07.2016 to 27.07.2016 Placement Training In-house Trainers
11. 04.01.2018 to 06.01.2018 Aptitude and
Communication In-house training
12. 26.12.2017 to 30.132.2017 Aptitude and
Communication Six phrase training
13. 21,22,23.8.2017 &
28,29,30.8.2017
Aptitude and
Communication Six phrase training
14. 14.06.2017 to 20.06.2017 Aptitude and
Communication Six phrase training
15. 27.12.2016 to 04.01.2016 Aptitude and
Communication Six phrase training
16. 27.07.2016 to 03.08.2016 Aptitude and
Communication In-house training
17. 11.07.2016 to 16.06.2016 Aptitude and
Communication Six phrase training
Placed Students List (2016 to till date)
Sl.
No. Department
No. of Students
placed
1. Aeronautical Engineering 53
2. Civil Engineering 47
3. Information Technology 29
4. Computer Science Engineering 94
5. Mechanical Engineering 116
6. Electronics and Communication
Engineering 168
Total 507