acces_muntatge_3_fid4525

8/8/2019 acces_muntatge_3_fid4525

1/1122

AIR EXHAUST VALVES

BOC - BOCP

Plastic exhaust valves manufactured from injection moulded white polypropylene plastic.

Used for extraction in VMC simple or double flow installations.

Can be fitted:

In plaster board ceilings: inlet with clamps (BOCP)The clamping sleeve, made of plastic, has three securing clamps.

A gasket ensures securing to the duct as well as sealing.

Slab crossmember: Long sleeve inlet (BOC)

The long sleeve is made of plastic and has 2 securing clamps.

A gasket guarantees securing to duct as well as sealing.

A flange at the bottom ensures securing to the inlet.

PLASTIC EXHAUST VALVES

Model Connector type

(mm)

BOCP 80 80 Ht 100 - 3-claw mounting connector

BOCP 125 125 Ht 100 -3-claw mounting connector

BOC 80 80 Ht 275 - Thick wall mounting connector

BOC 125 125 Ht 275 -Thick wall mounting connector

BOCP BOC

Model A B D1 D2 H

BOC 80 119 19 78 98 275

BOC 125 169 27 122 154 275

BOCP 80 119 19 78 99 100

BOCP 125 169 27 122 159 100

Dimensions (mm)


2/11673

Mou

ntingaccessories

Accessories

673

AIR EXHAUST VALVES

BOA

Plastic exhaust valves manufactured from injection moulded white polypropylene plastic.

Used for extraction in simple or double flow VMC installations. There are different sections

for numerous applications:

Reed inlet (BOA). Self-locking clamps to enable installation in Pladur, plaster or brick. Theinlet is composed of a 130 mm sleeve and a white polystyrene grille.

Clamp inlet (BOAP). The clamp sleeve, made of plastic, has 3 securing clamps.

inlets for thick walls (BOAE). By incorporating a supplementary extension, it is possible to

install in walls up to 290 mm thick. Secured by self-locking metal clamps.

Angled inlets (BOAC). Thanks to a sleeve with a 90 elbow, these inlets can be fitted to ceil-

ings or brick or plaster Pladur surfaces and they are secured by embedding or gluing.

PLASTIC SUPPLY/EXHAUST VALVES

Model Connector type

(mm)

BOAP 80 80 Ht 80 - 3-claw mounting connector

BOAP 125 125 Ht 60 - 3-claw mounting connector

BOAE 80 80 Ht 290 - Thick wall mounting connector

BOAE 125 125 Ht 290 - Thick wall mounting connector

BOAC 80 80 Ht 300 - Bent mounting connector

BOAC 125 125 Ht 440 - Bent mounting connector

Dimensions (mm)

BOAC 125

A

A

A

A

A

A

A

A

A

A

A

80 129 mm

125 172 mm

BOAE 125

BOAC 80

BOAP 125

BOAP 80 BOAE 80

6080

60

120

A

A


3/1144

AIR EXHAUST VALVES

ALIZE BAR

Wide range of self-adjusting exhaust valves, manufactured from injection moulded white

polystyrene.

Designed for kitchen, bathrooms and toilet ventilation applications, they are available either for

one fixed air volume or for dual air volume. The valve maintains a constant air volume within a

pressure range from 50 to 150 Pa.

BARP: Plasterboard mounting valve (BAR + MNG AB)

BARJ: Duct mounting valve (BAR + MNG JN)

BAR: Valve without connector

The valve can not be mounted without the connector.

To mount the connector to the valve only it is necessary to push it.

Valves without Valves with 3-claw Valves with duct mounting

mounting connector mounting connector Outlet connector with rubber seal Outlet

Air volume

diameter diameter

(m3 /h) Model Model (mm) Model (m

15 BAR 15 BARP 15 80/125 BARJ 15 125

30 BAR 30 BARP 30 80/125 BARJ 30 125

45 BAR 45 BARP 45 125 BARJ 45 125

60 BAR 60 BARP 60 125 BARJ 60 125

75 BAR 75 BARP 75 125 BARJ 75 125

90 BAR 90 BARP 90 125 BARJ 90 125

120 BAR 120 BARP 120 125 BARJ 120 125

150 BAR 150 BARP 150 125 BARJ 150 125

15/30 BAR 15/30 BARP 15/30 125 BARJ 15/30 125

20/75 BAR 20/75 BARP 20/75 125 BARJ 20/75 125

30/90 BAR 30/90 BARP 30/90 125 BARJ 30/90 125

45/105 BAR 45/105 BARP 45/105 125 BARJ 45/105 125

45/120 BAR 45/120 BARP 45/120 125 BARJ 45/120 125

45/135 BAR 45/135 BARP 45/135 125 BARJ 45/135 125

Mounting connector with rubber

seal ( 125mm)

Valve main body

Flap indicating additional air

volume

Removable louvre grilleRegulation module

Additional air volume pull cord

1

2

345

Components

Dimensions (mm)

Mounting connector for BARJ 3-claw mounting

connector for BARP80

3-claw mounting

connector for BARP125

BARP 80BARP and BARJ 125

SELF-ADJUSTING EXHAUST VALVES


4/11675

Mou

ntingaccessories

Accessories

675

AIR EXHAUST VALVES

ALIZE BAR

SELF-ADJUSTING EXHAUST VALVES (BAR) ACCESSORIES

Return angle guide

Ceiling instalation will require the return

angle fitting for pull cord guidance.

Installation

The MIA is fitted onthe back part of the

exhaust valve BAR.

Noise attenuation

without MIA.

Noise attenuation

with MIA.

Sound attenuator module (MIA)

Made of melamine foam fitted on a polystyrene support, theMIA module reduces noise transmission (Dn,e,w).

Only can be mounted at BAR 15 to 60.

Technical characteristics (Test reports CSTB 41391 and 42562)

Noise attenuation without MIA Noise attenuation with MIA

MNG JN - Mounting connector

with rubber seal.

Mounting connector 99 with rubber seal

Mounting connector 116 with rubber sealMounting connector 125 with rubber seal

MNG AB -Claw mounting connector

Suitable for plasterboard and ceiling tile

installations.

Airvolumem3/h

Pressure in Pa

BAR 150 m3/h

BAR 120 m3/h

BAR 90 m3/h

BAR 75 m3/h

BAR 60 m3/h

BAR 45 m3/h

BAR 15 m3/h

BAR 30 m3/h

Airvolumem3/h

Pressure in Pa

Nominalairvolume

Maximuma

irvolume

Air volume

m3 /h 70 Pa 100 Pa 130 Pa 160 Pa

15 19 27 31 34 60

30 27 30 33 36 59

45 27 33 34 37 55

Lw in dB(A) Dn, e*

(dB)Air volume

m3 /h 70 Pa 100 Pa 130 Pa 160 Pa

15 19 27 31 34 64

30 27 30 33 36 64

45 28 31 34 36 62

Lw in dB(A) Dn, e*

(dB)

Air volume

m3 /h 70 Pa 100 Pa 130 Pa 160 Pa

20/75 24 27 30 33 56

30/90 25 31 34 36 56

45/135 27 33 34 37 55

Lw in dB(A) Dn, e*

(dB)Air volume

m3 /h 70 Pa 100 Pa 130 Pa 160 Pa

20/75 26 30 32 34 64

30/90 27 31 34 37 63

45/135 28 31 34 36 62

Lw in dB(A) Dn, e*

(dB)

BAR 45/135 m3/h

BAR 45/120 m3

/hBAR 45/105 m3/h

BAR 30/90 m3/h

BAR 20/75 m3/h

BAR 45/135 m3/h

BAR 20/75 m3/hBAR 15/30 m3/h

BAR 30/90 m3/h


5/116

AIR EXHAUST VALVES

ALIZE BAR

The cover bezel or plate is fitted when painting is finished, in rectangular openings measuring 80 x 170 to 110 or at 245 mm.

For dimensions wider than 110 mm. , it is necessary to use larger mounting clamps (4) (ask for information).

Fit the plate against the wall placing the mounting clamps inside the opening. Do not over tighten the screws. Sealing is guaranteed by a foam seal

adhered to the plate.

Adaptor plates on a connector with kitchen inlet frame

Made of white polystyrene, enable the fitting of the ALIZE BAR outlet on an existing connector

with a kitchen outlet frame.

Bezel plates toilets and kitchen

To install in frames less than 90 mm wide , it is necessary to fit the ALIZE BAR outlet on a

spacer. In an installation with frames more than90 mm wide, the spacer is not necessary.

Adjustment module

Renewal plate with foam joint

Mounting clamp

Cover plates with self-regulating module for toilets

ALIZE renovation plates for 15 and 30 m3/h come with a built-in self-adjusting module placed

vertically.

Cover plates

Made of white polystyrene, used to seal existing orifices that are no longer necessary for

ventilation.

The steps to follow for installation are the same as above.

Model Airflow

PRC 177 x 278 without spacer

PRC.E 177 x 278 with spacer

Adjustment module

Renewal plate with foam joint

Mounting clamp

Model Airflow

PRS 15/177 x 278 15 m3/h

PRS.E 30/177 x 278 30 m3/h

Model Dimensions

PRP 177 x 278 177 x 278 mm

Model Dimensions

PAM 148 x 202 148 x 202 mm


6/11677

Mou

ntingaccessories

Accessories

AIR EXHAUST VALVES

ALIZE BEH

Humidity-adjustable inlets/outlets made of white polystyrene, to control the airflow accor-

ding to humidity or air pollution inside detached houses, flats or commercial premises.

In houses, these inlets will be connected to an extractor network.

There are timed (30 minutes) humidity-adjustable versions, manual, electric or with a pre-sence detector.

They have a clamp-type connector.

Examples of references

Airflow

control

Domestic

YesAutomatic

YES in kitchencontrolled by acord or electri-

cally

Humidity-adjustable

Commercial

YesAutomatic

NOMaximum

airflow

Minimum

airflowDomestic

YESworks with a

cord or electri-

cally (timedstopping)

Controlled manually

Commercial

Yes

Electrical Stopand StartMaximum

airflow

Minimum

airflow

Domestic

Yes

Works with pres-ence detection

(timed stopping)

Presence detection

Comerciales

Yes

Works with pre-sence detection(timed stopping)

Maximum

airflow

Manual opening with clamp Electrical opening with clamp Characteristicsconnector joint

Model Model Version Airflow (m3 /h) Outlet

Kitchen application

BEHC 6-40/90 - 125 BEHC.E 6-40/90 - 125 Higro 6-40/90 125 mm




Bathroom application

BEHS 5/40 - 80 Higro 5/40 80 mm

BEHS 5/40 - 125 Higro 5/40 125 mm

BEHS 10/45 - 80 Higro 10/45 80 mm

BEHS 10/45 - 125 Higro 10/45 125 mm

VMC application

BEHW 5/30 - 80 BEHW.E 5/30 - 80 Higro 5/30 80 mm

BEHW.DP 5/30 - 80 Higro 5/30 80 mm

Service sector application

BEHT 15/50 - 125 Higro 15/50 125 mm

BEHT 15/75 - 125 Higro 15/75 125 mm

BEHT 5/100 - 125 Higro 5/100 125 mm

BEHT 10/150 - 125 Higro 10/150 125 mmBEHT.E 5-40/100 - 125 Higro 5-40/100 125 mm

BEHT.E 10-45/150 - 125 Higro 5-45/150 125 mm

1: BEHC: Inlets for kitchens with automatic/ manualopening

BEHC.E: Inlets for kitchens with automatic/ electricopening

2: Minimum airflow controlled by humidity3: Minimum flow controlled by humidity4: Maximum airflow with manual or electrical opening5: Joint diameter

1: BEHS: Bocas para cuartos de bao con aberturaautomtica

2: Caudal mnimo controlado por nivel de humedad3: Caudal mximo controlado por nivel de humedad4: Dimetro del manguito

/ -B E H S 40 1251 2 3 4

5

1: BEHT: Inlets for bathrooms with electrical opening2: Minimum airflow3: Maximum airflow4: Joint diameter

1: BEHT-E: Inlets for bathrooms with electricalopening

2: Minimum airflow controlled by humidity3: Minimum airflow controlled by humidity4: Maximum flow with electric opening5: Joint diameter

1: BEHW: Inlets for WC with manual opening BEHW.E: Inlets for WC with electrical opening BEHW.DP: Inlets for WC with presence detector2: Minimum airflow3: Maximum airflow4: Joint diameter

1: BEHT: Inlets for bathrooms with automatic opening2: Minimum airflow controlled by humidity3: Minimum airflow controlled by humidity4: Joint diameter

B E H W / -5 30 80

1 2 3 4

- /B E H C 6 40 90

1 2 3 4 5

- 125

1 2 3 4

B E H T 50 12515 -/

B E H T 7515 /and

B E H T 100 125

1 2 3 4

5 -/

125-B E H T 15010 /to

- /.E 5 40 100

1 2 3 4 5

- 125B E H T

y - /.E 5 45 150 - 125B E H T

HUMIDITY-ADJUSTABLE INLETS/OUTLETS


7/118

AIR EXHAUST VALVES

Angle changerAngle changer for inlets with a cord installedin the ceiling. Enables the cord to be guidedalong the wall with the BEHC and BEHWmanual control inlets

Acoustic elementsAcoustic ring (2): plastic connector with abrush joint and melamine foam. Fitted to theduct just behind the inlet.

Acoustic element (1): Made of melaminefoam, fitted behind the inlet in models BEHC,BEHS and BEHW.

Noise levels are indicated for a nominal extraction flow and for a

maximum relative humidity.

Lw: Sound level measured at the valve

ALIZE

HIGRO 100 Pa 130 Pa 160 Pa

15/50 29 34 37

15/75 41 43 45

5/40/100 28 31 34

10/45/150 29 32 35

Lw en dB(A)

ALIZE

TEMPO 100 Pa 130 Pa 160 Pa

5/30 < 20 < 20 22

5/10 < 20 < 20 27

10/150 < 20 23 27

45/145 29 32 35

Lw en dB(A)

ALIZE

HIGRO 100 Pa 130 Pa 160 Pa

5/40 28 31 34

10/45 29 32 35

5/40/90 28 31 34

10/45/120 29 32 35

10/45/135 29 32 35

Lw en dB(A)

Domestic Commercial

Acoustic characteristics

Dimensions (mm)

Accessories

(1)

(2)


8/11679

Mou

ntingaccessories

Accessories

AIR EXHAUST VALVES

BOR

Model Air flow A B C H

BOR 100 from 15 to 160 m3 /h 100 87 100 250

BOR 125 from 25 to 200 m3 /h 125 155 130 275

BOR 160 from 30 to 250 m3 /h 160 196 130 250

BOR 200 from 55 to 330 m3 /h 200 236 130 250

Connector dimensions (mm)

Duct mounting connectorwith rubber seal

A

B

A B

H

C

A

B

3-claw mounting connector Paving slab and thick wallmounting connector

Characteristics and dimensions (mm)

R

+-

White polystyrene air exhaust valves for dwelling and commercial applications. All models

offer an adjustable central valve to regulate the airflow. They can be used in heating, air

conditioning and ventilation systems.

Operation range from 40 to 150 Pa.The central mobile shutter can be used to control the airflow by utilising a central adjustment screw.

Versions:

Adjustable inlets with a gasket for installation in duct: BOR

Adjustable inlets with a clamp for installation in Pladur BOR-P

Adjustable inlets with a long sleeve through walls: BOR-D

INTERIOR AIR EXHAUST VALVE

Duct diameter (mm)

Model Model Model

80 BOR 80 BOR 80 P BOR 80 D

100 BOR 100 BOR 100 P BOR 100 D

125 BOR 125 BOR 125 P BOR 125 D

150 BOR 150 BOR 150 P BOR 150 D

160 BOR 160 BOR 160 P BOR 160 D

200 BOR 200 BOR 200 P BOR 200 D

Plasterboard mounting valveDuct mounting valve Paving slab and thick wall mounting valve


9/110

AIR EXHAUST VALVES

Pressureloss(Pa)

Air flow m3/h

Supply air

Extract air

BOR 100 BOR 125

Pressureloss(Pa)

Air flow m3/h

Supply air

Extract air

BOR 160

Pressureloss(Pa)

Air flow m3/h

Supply air

Extract air

BOR 200

Pressureloss(Pa

)

Air flow m3/h

Supply air

Extract air

The numbers shown on the upper side of the performance curve graphs indicate the position of the

adjustable central valve.

Performance curves


10/11681

Mou

ntingaccessories

Accessories

AIR EXHAUST VALVES

BIR

Outlets entirely made of sheet steel coated in white epoxy paint. Consists of a blowing

cone, a mobile central shutter enabling the air jet to be adjusted and its direction gui-

ded and a rubber gasket that ensures it is secured and sealed, which can resist a conti-

nuous temperature of -20C to 120C.Used for injecting air in commercial accommodation and premises, ceiling-fitted. Range

of use from 50 to 150 Pa. The outlet comes with a galvanized steel connector to facili-

tate installation.

Technical specifications and dimensions (mm)

Specification curves

Dimensions

Model (mm) D1 (mm) D2 (mm) H (mm)

BIR 100 100 88 145 18

BIR 125 125 113 168 21

BIR 160 160 148 203 21BIR 200 200 188 243 21

These graphs show the flow-pressure curves of the BIR outlets as well as their Lw noise production expressed in dB (A).

The figures at the top indicate the adjustment amount.

R

Adjustment

BIR 100 BIR 125

BIR 160 BIR 200

PressuredifferenceinPa

Airflow in m3/hPressuredifferenceinPa

Airflow in m3/h

PressuredifferenceinPa

Airflow in m3/h

Pressur

edifferenceinPa

Airflow in m3/h


11/11

AIR EXHAUST VALVES

BOC

AABB

L1

CCEE

L

INTERIOR AIR EXHAUST VALVE

Metallic air exhaust valves for dwelling and commercial applications. All models offer

an adjustable central valve to regulate the airflow. They can be used in heating, air

conditioning and ventilation systems.

Model A B C D E L

BOC-100 100 125 74 75 137 47

BOC-125 125 150 98 100 161 49

BOC-160 160 185 128 149 218 60

BOC-200 200 225 157 157 248 75

10 15 20 30 40 50 100 200 300

(m3/h)10

15

20

30

40

50

100

200(Pa)

BOC - 100

-3 0 +3 +6 ( mm )

20 30 40 50 100 200 300 500

(m3/ h )10

20

30

40

50

100

200

(Pa)

BOC - 125

-3 0 +3 +6( mm )

40 50 100 200 300 500 1000

(m3/h)10

20

30

40

50

100

200

(Pa)

BOC - 160

-3 0 +3 +6( mm )

50 100 200 300 500 1000

(m3/h )10

20

30

40

50

100

200

(Pa)

BOC - 200

-3 0 +3 +6( mm )

acces_muntatge_3_fid4525

Documents