AB-100 Adapter BracketNow, for the first time, Spectronics Corporation’s UV lamps can be instantlyattached to horizontal wet-mag machines manufactured by MagnafluxCorporation. Before, end users could only use Magnaflux lamps with thesemachines, since their transformers were built to slip into the machine’s sidemount. The new AB-100 adapter bracket converts the side mount into a sturdytray to secure the world’s most popular inspection lamps, including theSpectroline FC-100, and SB-100P series. The end user no longer has to drillholes, build shelves or tie down the lamp to the mag unit. Designed to last alifetime, the AB-100 is made of solid stainless steel and is precison engineered.

The dimensions of the AB-100 bracket are 7W x 5 3⁄4L x 2"H(17.8W x 14.6L x 5.1 cm H).

VF-100 Spec-Stik™ Verification FixtureThe VF-100 Spec-Stik is a clever device that holds a Spectroline®

UV inspection lamp securely in place during the calibration process. This rugged bar is constructed to high precision of polished aluminum.It has two posts at one end and an adjustable radiometer-sensor holder at theother. The posts hold the pistol grip of the Spectroline UV lamp to be tested.Depending on which post is chosen, the lamp filter will be positioned exactly 12" (30.5cm) or 15" (38.1cm) from the sensor. Its bracket is adjustable up or downso that the sensor can be precisely aligned with the "hot spot" of the lamp.This assures that only the most accurate readings are being taken.The Spec-Stik eliminates juggling and assures superior accuracy at the same time!

HGS-100A Heat Guard/StandThis stainless-steel, vinyl-coated heat guard/stand makes lamp operation saferby protecting against accidental burn injury. Special insulators keep it fromtouching the lamp housing, thus minimizing heat conduction.

The HGS-100A helps prevent mechanical shock damage, resulting in substantial savings on bulb and filter replacement costs.

In addition, the HGS-100A acts as a stand so that the lamp head may beplaced filter-side down on a level surface without damage to the lamp.

The dimensions of the HGS-100A heat guard/stand are 85⁄8L x 61⁄2”W (21.9L x 16.5cmW).

Compatible UV LampsC-100 SeriesFC-100 SeriesFC-150 SeriesMaxima 3500 SeriesSB-100P Series

Compatible UV Lamps

BIB-150P SeriesC-100 SeriesFC-100 SeriesFC-150 SeriesMaxima 3500 SeriesSB-100P SeriesSB-100PR SeriesSB-125 Series

Compatible RadiometersDM-365XADSE-100XDSE-100X/LDSE-100HDSE-100H/LDSE-2000ADSE-2000A/LDSE-2000HDSE-2000H/L

Compatible UV Lamps

FC-100 SeriesFC-150 SeriesMaxima 3500 SeriesSB-100P Series

AB-100 shownmounted into

wet-mag machineside mount

May be used with allSpectroline sensors,including the new“A” version sensors

AB-100AdapterBracket

Accessories forLong Wave UV Lamps

CC-250

CC-120A

SPECTRONICSCORPORATION956 Brush Hollow Road, P.O. Box 483Westbury, New York 11590800-274-8888 • 516-333-4840Fax: 800-491-6868 • 516-333-4859www.spectroline.com

Compatible UV LampsBIB-150P SeriesC-100 SeriesFC-100 SeriesFC-150 SeriesMaxima 3500 SeriesSB-100P SeriesSB-125 Series

Compatible UV Lamps

BIB-150P SeriesC-100 SeriesFC-100 SeriesFC-150 SeriesMaxima 3500 SeriesSB-100P SeriesSB-125 Series

Compatible UV Lamps

BIB-150P SeriesC-100 SeriesFC-100 SeriesFC-150 SeriesMaxima 3500 SeriesSB-100P SeriesSB-125 Series

Compatible UV Lamps

BIB-150P SeriesC-100 SeriesFC-100 SeriesFC-150 SeriesMaxima 3500 Series SB-100P Series

DISTRIBUTED BY:

6/01 A87121-11PRINTED IN U.S.A.

RecycledPaper

FA-100 Flexible ArmDesigned for maximum versatility, the FA-100 measures 24" (61cm) when fullyextended, and allows 360° rotation of the lamp head. It is ruggedly constructedof cast aluminum. The lamp head attaches to an adjustable pin on the FA-100that can be pivoted as desired and locked into any horizontal or vertical position.

The flexible arm may be used with the Spectroline W-6 wall mount or the B-6bench mount (both separately available). The W-6 attaches easily to a wall andutilizes a stationary pin to mount the arm. The B-6 also has a stationary pin,attached to a 36" (91cm) pole that may be secured to a bench. The FA-100 can be adjusted to any height on the pole.

WM-100 Wall Mounting BracketThe WM-100 is a sturdy bracket for wall mounting of the lamp head. It isequipped with an adjustable pin for total flexibility. Simply affix the stainlesssteel bracket to a wall and place the lamp head on the pin. Now, the lamp head may be locked into any horizontal or vertical position desired by means of a quick rotation of the adjustable pin.

CC-120A and CC-250 Carrying CasesBoth the CC-120A and CC-250 are convenient for lamp transport and storage. The CC-250 isconstructed of painted aluminum and providesample room for the lamp plus accessories, tools,a spare bulb, etc. The lightweight CC-120A ismade of high-impact plastic, making it very easyto carry.

The dimensions of the CC-120A are 12 1⁄2W x 21 5⁄16 L x 12 3⁄4" H (31.8W x 54.1L x 32.4cmH),while the CC-250 measures 10W x 21 3⁄4 L x 13 1⁄4" H (25.4W x 55.2L x 33.7cmH).

AF-100 UV-Transmitting Splash GuardThis exclusive accessory protects the filter fromsplattering liquids, such as water and penetrantwash. The AF-100 easily clips firmly onto thelamp head and is readily removable.