accoutrements

501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998

C R A F T - M A I D K I T C H E N S I N C .C

Accoutrements

Q-1

Accoutrements Accoutrements IndexIndex

BBun Feet (Reeded) - #552 ..........................................Q-54Bun Feet - #550 ............................................................Q-54

CCorner Fluted Onlay ...............................................Q-8–Q-9

Tall ......................................................................................Q-9Wall or Base ....................................................................Q-8

Corner Reeded Onlay .........................................Q-19–Q-20Tall ...................................................................................Q-20Wall or Base ...................................................................Q-19

Country French Foot .....................................................Q-54Custom Beaded Bench ..................................................Q-81Custom Bench Seat .....................................................Q-80

DDecorative Routed Edges .............................................Q-21

EEnkeboll Architectural Woodcarvings .......................Q-51

FFiller with finished return attached to cabinet side

creating a 90° inside corner .........................Q-79Finials ................................................................................Q-50Fireplace Mantel ............................................................Q-46Fireplace Surround .........................................................Q-47

Custom Fireplace Surround ....................................Q-48Fluted Column ........................................................Q-10–Q-11

Tall ......................................................................................Q-11Wall or Base ...................................................................Q-10

Fluted Onlay .............................................................Q-6–Q-7Tall ......................................................................................Q-7Wall or Base ....................................................................Q-6

Fluted Wall Column with Corbel ...................................Q-12Flutes .........................................................................Q-3–Q-5Fretwork Valance ............................................................Q-82

HHand Carved Corner .......................................................Q-31Hand Carved Corner - Tall ............................................Q-32

IInterior House Door ......................................................Q-83

KKessebohmer ..................................................... Q-85–Q-125

Arena Champagne Accessories ................Q-85–Q-95Base Cabinet Corner Chrome Carousels Q-112–Q-113Base Comfort Chrome Pullout ..............................Q-106Base Diagonal Comfort Chrome Pullout .............Q-107Base Diagonal Unit Chrome Pullout ....................Q-105Base Unit Chrome Pullout ......................................Q-104Chrome Accessories .....................................Q-97–Q-116Chrome Pantry Depot Unit ......................................Q-101Chrome Pantry Pullout .............................................Q-102Chrome Storage Racks ...........................................Q-103Dispensa Diagonal Chrome Pantry Unit ..............Q-99Dispensa Swing Chrome Pantry Unit ...................Q-98Door Lift Fittings .........................................Q-119–Q-122Folding Lift Fitting .....................................................Q-121Front Chrome Pullouts and Inside Chrome Pullouts .................................................................Q-111Lemans Full Swing Corner Chrome Pullout .........Q-110Lift Fitting ...................................................................Q-120Magic Corner II Swivel Chrome Pullout ................Q-109Magic Corner I Swivel Chrome Pullout ................Q-108Sliding Closet Doors ...................................Q-123–Q-125Soft Lift Fitting .........................................................Q-122Tandem Swivel Chrome Pantry Unit .....................Q-100Tandem Swivel Chrome Pullout ...............................Q-116Turn Motion Corner Chrome Units ........................Q-114Wall Cabinet Corner Chrome Carousels ...............Q-115Worktop Extension .....................................................Q-118Worktop Extension - TopFlex ...................................Q-117

Keystone Block ...............................................................Q-58

LLambs Tongue .................................................................Q-58

OOxford (Ionic) Column Collection .................................Q-13

PPediments .........................................................................Q-49Pie Cut in Turned Leg or Post for applying to cabinet corner ...................................................Q-78Plain Block ........................................................................Q-53

Q-2 501 South Ninth Street, Reading, PA 19602 • Phone 610-376-8686 • Fax 610-376-6998


C R A F T - M A I D

QQuarter Column End Panel - Base and Wall ...........Q-33Quarter Column End Panel - Tall ................................Q-34Queen Anne Vanity Table ..............................................Q-44

RRecessed PIlaster Column Assembly ......................Q-35Reeded Column - Tall ......................................................Q-18Reeded Coulumn - Wall or Base ...................................Q-17Reeded Onlay - Tall .........................................................Q-16Reeded Onlay - Wall or Base ........................................Q-15Rosette Onlays ...............................................................Q-52Routed Rosette .............................................................Q-53

SSerpentine Desk .............................................................Q-45Sliding Closet Doors ......................................Q-123–Q-125

T"Timeless Classic" Hand Carved Collection ...............................................Q-36–Q-39Tables ....................................................................Q-40–Q-43Toe Leg ..................................................................Q-55–Q-57Turned Pilaster Column - Tall ......................................Q-27Turned Pilaster Column - Wall or Base ....................Q-26Turned Pilaster Onlay - Base ......................................Q-24Turned Pilaster Onlay - Tall .........................................Q-28Turned Pilaster Onlay - Wall ........................................Q-23Turned Pilaster Onlay with Victorian Moulding - Tall ....................................................Q-25Turned Toe Leg - #556 .................................................Q-54Turning Cut in Half .........................................................Q-78Turning Cut into Quarters ...........................................Q-78Turnings .................................................................Q-59–Q-77

VVictorian Moulding Applique - Tall ............................Q-30Victorian Moulding Applique - Wall or Base ...........Q-29



Accoutrements

Q-3

FLUTES

Can be used on Fillers, Extended Stiles, Integral Stiles Etc. Available Flute widths are 1/4", 3/8" & 1/2". Flutes stop 1 1/2" from top and bottom and are equally spaced, on the exposed stile, unless otherwise specified. (See illustrations below)

1 1/2" StileExtended or Integral Stile

3/8" Lipped Door

Flutes - Equally Spaced

Inset Door1 1/2" StileExtended or Integral Stile

Flutes - Equally Spaced



C R A F T - M A I D

FLUTES (WALL OR BASE)

Can be used on Fillers, Extended Stiles, Integral Stiles etc. Available Flute widths are 1/4", 3/8" & 1/2". Flutes stop 1 1/2" from top and bottom (5 1/2" from bottom if flush toe). Flutes are equally spaced, on the exposed stile, unless otherwise specified. ( See illustrations on Page 1 ) Specify number of Flutes.

Code: FLUTE 14 (1/4" wide flutes) Price: $42 per flute (up to 48" high)FLUTE 38 (3/8" wide flutes)FLUTE 12 (1/2" wide flutes)

Wall Cabinet with extended stile

1 1/2"

1 1/2"

Wall Cabinet with integral stile

Wa l l Filler

5 1/2" Flush Toe

1 1/2"

1 1/2"

Base Cabinet with extended stile

Base Filler

Base Cabinet with integral stile

Also availablewith optionalRosettes. SeePages Q-52 + Q-53



Accoutrements

Q-5

FLUTES (TALL)

Can be used on Fillers, Extended Stiles, Integral Stiles etc. Available Flute widths are 1/4", 3/8" & 1/2". Flutes stop 1 1/2" from top and bottom (5 1/2" from bottom if flush toe). Flutes are equally spaced, on the exposed stile, unless otherwise specified. (See illustrations on Page 1) Specify number of Flutes.

Code: FLUTET14 (1/4" wide flutes) Price: $62 per flute ( up to 96" high ) FLUTET38 (3/8" wide flutes) FLUTET12 (1/2"wide flutes)

Tall Cabinet with integral stile

1 1/2"

1 1/2"

Tall Cabinet with extended stile

T a l l Filler

5 1/2" Flush Toe




C R A F T - M A I D

FLUTED ONLAY (WALL OR BASE)

3/8" thick Fluted Onlay with 3/4" thick Solid Wood blocks top and bottom. Can be applied to Fillers, Extended Stiles or Integral Stiles, up to 4" wide. (Cost of Filler, Ext. Stile or Integral Stile must be added) Note: Blocks are square as standard - Bottom block is 5 1/2" high if flush toe. Blocks are flush to the outside unless otherwise specified. 3 flutes are standard - Additional flutes are $42 each.

Code: FLON14 (1/4" wide flutes) Price: $489 each (up to 48" high) FLON38 (3/8" wide flutes) FLON12 (1/2" wide flutes)

Onlay

3/4"

3/8"Fluted

Side View

F i l l e r o r stile

3/4"Block

3/4"Block

1 1/2"

Flush Toe5 1/2"

Wal l Cab inet with extended stile

W a l l Filler

1 1/2"

1 1/2" from frame opening

Note:

Base Filler


1 1/2"

1 1/2"



Note:

Wal l Cab inet with integral stile

Note:


Note:


1 1/2"



Accoutrements

Q-7

FLUTED ONLAY (TALL)

3/8" thick Fluted Onlay with 3/4" thick Solid Wood blocks top and bottom. Can be applied to Fillers, Extended Stiles or Integral Stiles, up to 4" wide. (Cost of Filler, Ext. Stile or Integral Stile must be added) Note: Blocks are square as standard - Bottom block is 5 1/2" high if flush toe. Blocks are flush to the outside unless otherwise specified. 3 flutes are standard - Additional flutes are $62 each.

Code: FLONT14 (1/4" wide flutes) Price: $732 each (up to 96" high) FLONT38 (3/8" wide flutes) FLONT12 (1/2" wide flutes)

3/4"

3/8"

Side View

Filler or stile

Block3/4"

3/4"Block



1 1/2"1 1/2"from frame opening

Note: Note:

T a l l Filler

1 1/2"

1 1/2"from frame opening

FlutedOnlay

5 1/2"

1 1/2"

Flush toe



C R A F T - M A I D

CORNER FLUTED ONLAY (WALL OR BASE)

3/8" thick Fluted Onlay with 3/4" thick Solid Wood blocks top and bottom(up to 4" wide). Cabinet must be ordered with Integral Stile. If ordering with door/frame on end, Integral Stile is also required on end. (Cost of Integral Stile(s) must be added) Note: Blocks are square as standard - bottom block is 5 1/2" high if flush toe. 3 flutes are standard (on each side).Additional flutes are $42 each.

Code: CORFLON14 (1/4" wide flutes) CORFLON38 (3/8" wide flutes) CORFLON12 (1/2" wide flutes)

Price: $1131 (up to 48" high)

Wall cabinet

with integral

stile

1 1/2"

Base cabinet

with integral

stile

1 1/2" fro

m frame

opening

1 1/2"

Flush toe1 1/2

"

5 1/2"

Onlay

3/8"Fluted

Side View

3/4"Block

3/4"Block

1 1/2" fro

m frame

opening



Accoutrements

Q-9

CORNER FLUTED ONLAY (TALL)

3/8" thick Fluted Onlay with 3/4" thick Solid Wood blocks top and bottom(up to 4" wide). Cabinet must be ordered with Integral Stile. If ordering with door/frame on end, Integral Stile is also required on end. (Cost of Integral Stile(s) must be added) Note: Blocks are square as standard - bottom block is 5 1/2" high if flush toe. 3 flutes are standard (on each side). Additional flutes are $62 each.

Code: CORFLONT14 (1/4" wide flutes) CORFLONT38 (3/8" wide flutes) CORFLONT12 (1/2" wide flutes)

Price: $1616 (up to 96"high)

5 1/2"

Onlay

3/8"Fluted

Side View

3/4"Block

3/4"Block

1 1/2" fro

m frame

opening

Tall cabinet

with integral

stile

1 1/2"

Flush toe

1 1/2"



C R A F T - M A I D

FLUTED COLUMN (WALL OR BASE)(up to 4" wide with 6" returns - up to 48" high)

Code: FLCOLW14 (Wall-1/4" wide flutes) FLCOLW38 (Wall-3/8" wide flutes) FLCOLW12 (Wall-1/2" wide flutes)

3/8" thick Fluted Onlay attached to Wall or Base Filler with 6" returns. 3/4" thick Solid Wood blocks top and bottom with beveled edges. Blocks are square as standard - bottom block is 5 1/2" high if flush toe. Blocks are flush to outside unless otherwise specified. Specify width and height. 3 flutes are standard - Additional flutes are $42 each.


Note: Can also be ordered with full return left, right or both. (See Wall, Base or Tall options)

Onlay

3/8"

Side View

Fluted

Block3/4"

6"

Flush toe

5 1/2"

1 1/2"

3/4" Solid Wood Block with beveled bottom edge.

3/4" Solid Wood Block with beveled top edge.

3/8" thick Fluted Onlay

upto48"

6"

1 1/2"

34 1/2"

6"

Code: FLCOLB14 (Base-1/4" wide flutes) FLCOLB38 (Base-3/8" wide flutes) FLCOLB12 (Base-1/2" wide flutes)

Price: $672

1 1/2" 1 1/2"

1 1/2"

Block3/4"



Accoutrements

Q-11

3/8" thick Fluted Onlay attached to Tall Filler with 6" returns. 3/4" thick Solid Wood blocks top and bottom with beveled edges. Blocks are square as standard - bottom block is 5 1/2" high if flush toe. Blocks are flush to outside unless otherwise specified. Specify width and height. 3 flutes are standard- Additional flutes are $62 each.


FLUTED COLUMN (TALL)(up to 4" wide with 6" returns - up to 96" high)

Code: FLCOLT14 (1/4" wide flutes) FLCOLT38 (3/8" wide flutes) FLCOLT12 (1/2" wide flutes)

Note: Can also be ordered with full return left, right or both. (See Wall, Base or Tall options)

3/4" Solid Wood Block with beveled bottom edge.

3/8" thick Fluted Onlay

upto96"

6"

5 1/2"

1 1/2"

Flush toe

Onlay

3/4"

3/8"

Side View

Block

Fluted

6"

1 1/2"

1 1/2"



C R A F T - M A I D

FLUTED WALL COLUMN WITH CORBEL(3" wide - up to 18" deep - up to 48" high)

Available Flute widths are 1/4",3/8" & 1/2". Flutes stop 1 1/2" from top and bottom unless otherwise speciified. Corbel shape is standard as shown. Specify all dimensions. 3 Flutes are standard - for additional Flutes add $42 each.

Code: FWCC14 (1/4" wide flutes) Price: $1071 FWCC38 (3/8" wide flutes) FWCC12 (1/2" wide flutes)

upto48"

specify

up to 18"




Accoutrements

Q-13

OXFORD (IONIC) COLUMN COLLECTION(For use with either Wall Or Base Cabinet - up to 48" high)

Increases Cabinet Width By 2 1/4" (i.e. 30" wide cabinet with Ionic Column is 32 1/4" wide overall)

FOR USE ON:1. The end of a Wall Cabinet.2. The end of a Base Cabinet.3. The corners of a Sink or Range that have been pulled forward.4. The corner of an Island.

CODE: TCCL PRICE: $1247 Each

2 1/4"2 1/4"Shown with optionalDoor/Frame on end



C R A F T - M A I D

Column

All columns are custom made. Available in almost any size and most wood species. Specify straight or tapered. Available plain or with flutes. Contact Craft-Maid for quote.



Accoutrements

Q-15

REEDED ONLAY (WALL OR BASE)

1/2" thick Reeded Onlay with 3/4" thick Solid Wood blocks top and bottom. Can be applied to Fillers, Extended Stiles or Integral Stiles. ( up to 4" wide) (Cost of Filler, Extended Stile or Integral Stile must be added) Note: Blocks are square as standard - Bottom block is 5 1/2" high if flush toe. Blocks are flush to outside unless otherwise specified.

Code: REON Price: $489 Each (up to 48" high)

Flush Toe5 1/2"

1/2"

1/2"

3 1/2"

Reed Profile



Wa l l Filler

3/4" 3/4"

1/2"

Side View

Block

Base Filler



Filler orstile

ReededOnlay

1 1/2" fromframe opening






C R A F T - M A I D

REEDED ONLAY (TALL)

1/2" thick Reeded Onlay with 3/4" thick Solid Wood blocks top and bottom. Can be applied to Fillers, Extended Stiles or Integral Stiles. ( up to 4" wide) (Cost of Filler, Extended Stile or Integral Stile must be added) Note: Blocks are square as standard - Bottom block is 5 1/2" high if flush toe. Blocks are flush to outside unless otherwise specified.

Code: REONT Price: $732 Each (up to 96" high)



1/2"

SideView

Filler or stile

3/4"3/4"Block

3/4"

1/2"

1/2"

3 1/2"

Reed Profile

5 1/2" Flush toe



ReededOnlay

BlockTallFiller



Accoutrements

Q-17

REEDED COLUMN (WALL OR BASE)

1/2" thick Reeded Onlay with 3/4" thick Solid Wood blocks top and bottom. Up to 4" wide with 6" returns. Note: Blocks are square as standard - Bottom block is 5 1/2" high if flush toe. Blocks are flush to outside unless otherwise specified. Specify all dimensions.

Code: RECOLW (Wall) Price: $672 (up to 48" high)Code: RECOLB (Base) Price: $672

1/2"

1/2"

3 1/2"

Reed Profile

Flush toe

Onlay

1/2"

Side View

Reeded

Block3/4"

Block3/4"

6"

34 1/2"

up to 4"

6"

Upto48"

6"

Base Wallup to 4"

5 1/2"



C R A F T - M A I D

1/2" thick Reeded Onlay with 3/4" thick Solid Wood blocks top and bottom. Up to 4" wide with 6" returns. Note: Blocks are square as standard - Bottom block is 5 1/2" high if flush toe. Blocks are flush to outside unless otherwise specified. Specify all dimensions.

Code: RECOLT Price: $998 (up to 96" high)

REEDED COLUMN (TALL)

1/2"

1/2"

3 1/2"

Reed Profile

upto96"

up to 4"

6"

5 1/2"

Flush toe

Onlay

3/4"

1/2"

S i d e View

Block

Reeded

6"



Accoutrements

Q-19

CORNER REEDED ONLAY (WALL OR BASE)

1/2" thick Reeded Onlay with 3/4" thick Solid Wood blocks top and bottom. Cabinet must be ordered with Integral Stile. If ordering with door/frame on end, Integral Stile is also required on end. (Cost of Integral Stile(s) must be added) Note: Blocks are square as standard - bottom block is 5 1/2" high if flush toe.

Code: CORREON Price: $1131 (up to 48" high)

Flush toe1/2"

1/2"

3 1/2"

Reed Profile

Wall cabinet

with integral

stile

1 1/2" fro

m frame

opening )

Base cabinet

with integral

stile

1 1/2" fro

m frame

opening

Onlay

1/2"Reeded

Side View

3/4"Block

3/4"Block

5 1/2"



C R A F T - M A I D

CORNER REEDED ONLAY (TALL)

1/2" thick Reeded Onlay with 3/4" thick Solid Wood blocks top and bottom(up to 4" wide). Cabinet must be ordered with Integral Stile. If ordering with door/frame on end, Integral Stile is also required on end. (Cost of Integral Stile(s) must be added) Note: Blocks are square as standard - bottom block is 5 1/2" high if flush toe.

Price: $1616 (up to 96"high)

5 1/2"

Onlay

1/2"Reeded

Side View

3/4"Block

3/4"Block

1/2"

1/2"

3 1/2"

Code: CORREONT

Reed Profile

1 1/2" fro

m frame

opening

Tall cabinet

with integral

stile



Accoutrements

Q-21

Decorative Routed Edges

Code: DREC (Chamfer) Price: $107 Each (Base or Wall - up to 48" high) Code: DREC (Chamfer) Price: $107 Each (Base or Wall - up to 48" high) Code: DRECT (Chamfer) Price: $159 Each (Tall) Code: DRECT (Chamfer) Price: $159 Each (Tall)

Code: DRESSR (Small step radius) Price: $107 Each (Base or Wall - up to 48" high) Code: DRESSR (Small step radius) Price: $107 Each (Base or Wall - up to 48" high) Code: DRESSRT (Small step radius) Price: $159 Each (Tall) Code: DRESSRT (Small step radius) Price: $159 Each (Tall) Code: DRESR (Step radius) Price: $107 Each (base or Wall - up to 48" high) Code: DRESR (Step radius) Price: $107 Each (base or Wall - up to 48" high) Code: DRESRT (Step radius) Price: $159 Each (Tall) Code: DRESRT (Step radius) Price: $159 Each (Tall)

Stops 1 1/2" from top and bottom unless otherwise specified. (5 1/2" from bottom if flush toe) Note: Not available in European.

1 1/2"

1 1/2"

1 1/2"

1 1/2"

1 1/2"

1 1/2"

Wall Base

Tall 1/4" Chamfer

1/4"

3/16"

3/16"

Small step Radius3/8"

3/8"

Step Radius1/2"

1/2"



C R A F T - M A I D

Stops 3" from top and bottom unless otherwise specified. (7" from bottom if flush toe)Note: Not available in European.

Code: CRCW (Wall - up to 48") Price: $389Code: CRCB (Base) Price: $389Code: CRCT (Tall) Price: $539

Radius Crown may be required on wall/tall cabinets.2 1/4"2 1/4"

Carved Round Corner



Accoutrements

Q-23

Solid Wood Block1 1/4" Thick2 1/2" Wide2" HighBeveled Top EdgeBlock is flush to outside edge


3/4" from frame opening (3 1/4" overall stile)



3/4" from frame opening (3 1/4" overall stile)

W a l l Filler

TURNED PILASTER ONLAY (WALL)(up to 48" high)

Pilaster is available Plain - Rope - Fluted or Reeded (See below)

Pilaster and Solid Wood Block applied to Wall Fillers, Extended Stiles or Integral Stiles. Block is 1 1/4" thick x 2 1/2" wide x 2" high and is mounted flush to outside edge. Cost of Filler, Extended Stile or Integral Stile must be added. Works best with overall stile width as follows -Beaded Inset - Flush Inset - Lipped Doors - 4" O. A. Stile Width (Plain)Code: TPOW Price: $325

(Rope)Code: TPOWRO Price: $441

(Fluted) Code: TPOWFL Price: $325

(Reeded)Code: TPOWR Price: $325

Note: Rope, Fluted and Reeded profiles shown here Do Not match - TCTF - TCTRE - TCTTR Turningsshown on pages Q-60 & Q-61

ReededRope FlutedPlain

1 1/2"



C R A F T - M A I D



3 / 4 " f r o m frame opening (3 1/4" overall stile)




TURNED PILASTER ONLAY (BASE)Pilaster is available Plain - Rope - Fluted or Reeded (See below)

Pilaster and Solid Wood Block applied to Base Fillers, Extended Stiles or Integral Stiles. Block is 1 1/4" thick x 2 1/2" wide x 2" high (5 1/2" high if flush toe) and is mounted flush to outside edge. Cost of Filler, Extended Stile or Integral Stile must be added. Works best with overall stile width as follows - Beaded Inset - Flush Inset - Lipped Doors - 4" O. A. Stile Width (Plain)Code: TPOB Price: $325

(Rope)Code: TPOBRO Price: $441

(Fluted) Code: TPOBFL Price: $325

(Reeded)Code: TPOBR Price: $325


Base Filler


1 1/2"



Accoutrements

Q-25



Variable

Typically 34 1/2" to 36"



Victorian Mldg.

T a l l Filler

1 1/2"

TURNED PILASTER ONLAY W/ VICTORIAN MLDG. (TALL)(up to 96" high)

Pilaster is available Plain - Rope - Fluted or Reeded (See below)

Pilaster and Solid Wood Block applied to Tall Fillers, Extended Stiles or Integral Stiles. Block is 1 1/4" thick x 2 1/2" wide x 2" high (5 1/2" high if flush toe) and is mounted flush to outside edge. Cost of Filler, Extended Stile or Integral Stile must be added. Works best with overall stile width as follows - Beaded Inset - Flush Inset - Lipped Doors - 4" O. A. Stile Width (Plain)Code: TPOVMT Price: $637

(Rope)Code: TPOVMTRO Price: $753

(Fluted) Code: TPOVMTFL Price: $637

(Reeded)Code: TPOVMTR Price: $637



1 1/2"



C R A F T - M A I D

Note: Can also be ordered with full return left, right or both. (See Wall or Base options)

TURNED PILASTER COLUMN (WALL OR BASE)(2 1/2" wide with 6" returns - up to 48" high)Pilaster is available Plain - Rope - Fluted or Reeded (See below)

Pilaster and Solid Wood Block applied to 2 1/2" wide Filler with 6" Returns. Block is 1 1/4" thick x 2 1/2" wide x 2" high and is mounted flush to outside edges. If wider filler is ordered, block will be centered unless otherwise specified.

(Plain)Code: TPCOLW (Wall - up to 48" high) Price: $509Code: TPCOLB (Base) Price: $509

(Rope)Code: TPCOLWRO (Wall - up to 48" high) Price: $625Code: TPCOLBRO (Base) Price: $625

(Fluted)Code: TPCOLWFL (Wall - up to 48" high) Price: $509Code: TPCOLBFL (Base) Price: $509

(Reeded)Code: TPCOLWRE (Wall - up to 48" high) Price: $509Code: TPCOLBRE (Base) Price: $509

Side View

6"

5 1/2"

Flush Toe

Solid Wood Block1 1/4" Thick2 1/2" Wide2" HighBeveled Top EdgeBlock is flush to outside edges

upto48"

2 1/2"



1 1/2"



Accoutrements

Q-27

TURNED PILASTER COLUMN (TALL)(2 1/2" wide with 6" returns - up to 96" high)Pilaster is available Plain - Rope - Fluted or Reeded (See below)

Pilaster and Solid Wood Block applied to 2 1/2" wide Filler with 6" Returns. Block is 1 1/4" thick x 2 1/2" wide and is mounted flush to outside edges. If wider filler is ordered, block will be centered unless otherwise specified. Specify all dimensions.

(Plain)Code: TPCOLT Price: $890

(Rope)Code: TPCOLTRO Price: $1006

(Fluted) Code: TPCOLTFL Price: $890

(Reeded)Code: TPCOLTRE Price: $890

Note: Can also be ordered with full return left, right or both. (See Tall options)

5 1/2"

Flush Toe

1 1/4" Block withVictorian Mldg. applied

Side View

6"


variable

Typically 34 1/2" to 36"

Victorian Mldg. 1 1/2"

upto96"

2 1/2"


1 1/2"



C R A F T - M A I D



T a l l Filler



up to96"

TURNED PILASTER ONLAY (TALL) (up to 96" high) Pilaster is available Plain - Rope - Fluted or Reeded (See below)

Pilaster and Solid Wood Block applied to Tall Fillers, Extended stiles or Integral Stiles. Block is 1 1/4" thick x 2 1/2" wide x 2" high (5 1/2" high if flush toe) and is mounted flush to outside edge. Cost of filler, extended stile or integral stile must be added. Works best with overall stile width 4".

(Plain)Code:TPOT Price: $392

(Rope)Code: TPOTRO Price: $494

(Fluted)Code: TPOTFL Price: $392

(Reeded)Code: TPOTRE Price: $392



1 1/2"



Accoutrements

Q-29

VICTORIAN MOULDING APPLIQUE (WALL OR BASE)(up to 48" high)

Victorian Moulding can be applied to Fillers, Extended Stiles or Integral Stiles. Moulding will stop 1 1/2" from top and bottom unless otherwise specified (5 1/2" from bottom if flush toe). 3 1/2" minimum overall stile width. Cost of Filler, Extended or Integral Stile must be added.

Code: VMAW (Wall) Price: $201Code: VMAB (Base) Price: $201


1 1/2"


Base Filler


Wa l l Filler

1 1/2"

1 1/2"

1 1/2"

1/4"


Flush Inset 1/4"Beaded Inset 5/8"Trad. Lipped 1/2"

Note:

VictorianMoulding

11/16"

7/16"

5 1/2" Flush Toe



C R A F T - M A I D

VICTORIAN MOULDING APPLIQUE (TALL)(up to 96" high)

Victorian Moulding can be applied to Fillers, Extended Stiles or Integral Stiles. Moulding will stop 1 1/2" from top and bottom unless otherwise specified (5" from bottom if flush toe). 3 1/2" minimum overall stile width. Cost of Filler, Extended or Integral Stile must be added.

Code: VMAT (Tall) Price: $352

1 1/2"

1 1/2"


Ta l l Filler

Flush Inset 1/4"Beaded Inset 5/8"Trad. Lipped 1/2"

Note:

1/4"

Tal l Cabinet with integral stile

VictorianMoulding

11/16"

7/16"

5 1/2" Flush Toe



Accoutrements

Q-31

HAND CARVED CORNER

Increases Cabinet width by 1 1/2". Carving stops 1 1/2" from top and bottom unless otherwise specified (5 1/2" from bottom if flush toe). Price includes hand carved corner and return.

HCCB (Base) $1067 HCCW (Wall-up to 48") $1067

Code: Price:

Flush Toe

1 1/2"1 1/2"

1 1/2"1 1/2"



C R A F T - M A I D

HAND CARVED CORNER (TALL)

Increases cabinet width by 1 1/2". Carving stops 1 1/2" from top and bottom unless otherwise specified (5 1/2" from bottom if flush toe). Price includes hand carved corner and return.

Code: Price: HCCTS (TALL SHALLOW) $2279 HCCTD (TALL DEEP) $2500

Flush Toe

1 1/2"1 1/2"



Accoutrements

Q-33

QUARTER COLUMN END PANEL (BASE AND WALL)

Increases Cabinet width by 1 1/2". Radius Solid Wood Block (1 1/2" High) top and bottom of Wall cabinets and Base Cabinets with toe space. Square Solid Wood Block (5 1/2" High) at bottom of Base cabinets with flush toe space. Price includes return.

Code: QCEPW (Wall - up to 48" high) Price: $582Code: QCEPB (Base) Price: $582

Top View

1 1/2"Cabinet Front Frame

End

5 1/2" High Square Solid Block if Flush Toe

Cabi

net

Note: You can use any standard turning -- Price: $667 Wall $667 Base



C R A F T - M A I D

Increases Cabinet width by 1 1/2". Price includes return. Radius Solid Wood Block top and bottom of Wall cabinets and Base or Tall Cabinets with toe space. Square Solid Wood Block at bottom of Base or Tall Cabinets with flush toe space. Tall Cabinet also has Radius Solid Wood Block at door split.

Code: QCEPTS (Tall - Shallow) Price: $953Code: QCEPTD (Tall - Deep) Price: $1129

QUARTER COLUMN END PANEL (TALL)

Top View

1 1/2"Cabinet Front Frame

End

Cabi

net

5 1/2" High Square Solid Block if Flush Toe



Accoutrements

Q-35

RECESSED PILASTER COULMN ASSEMBLY(4" WIDE X 6" DEEP - WALL, BASE OR TALLER)

Pilaster is available Plain - Rope - Fluted or Reeded

Code: RPCAW (Wall - up tp 48" high) Price: $616Code: RPCAB (Base) Price: $616Code: RPCAT (Taller) Price: $818

(Rope) Code: RPCAWRO (Wall - up to 48" high)) Price: $732 Code: RPCABRO (Base) Price: $732 Code: RPCATRO (Taller) Price: $934

(Fluted) Code: RPCAWFL (Wall - up to 48" high) Price: $616Code: RPCABFL (Base) Price: $616Code: RPCATFL (Taller) Price: $818

(Reeded)Code: RPCAWRE (Wall - up to 48" high) Price: $616Code: RPCABRE (Base) Price: $616Code: RPCATRE (Taller) Price: $818

(Plain)


Block is 3" hightop & bottom

(Bottom block is 5 1/2" high if flush toe)

Plain Pilaster shown

Reeded

Rope

Fluted

Plain

1 1/2"

6"

4"

1 1/4 "

3/4"

Top View

1/8"



C R A F T - M A I D

"TIMELESS CLASSIC"Hand Carved Collection

Hand Carved Corners (Includes Carved Foot) Base or Wall Height - 29" to 34 1/2" High Must Add Appropriate Wood & Finish Premiums

Ordering Code: TCCGPrice: $2619 List

Ordering Code: TCCVNPrice: $3868 List

Ordering Code: TCCRFPrice: $2619 List

Ordering Code: TCCRSPrice: $3669 List

Note: Any deviations to Specifications listed above will require a quotation by Craft-Maid Kitchens. Other Hand Carved Details are available upon request.

"Grapes"

"Vine" "Reed & Flowers"

"Rose" "Radius Top" (No Grapes)Ordering Code: TCCRPrice: $2235 List



Accoutrements

Q-37


Hand Carved Valances (Does Not Include Handcarved Foot) Available up to 33" in width Must Add Appropriate Wood & Finish Premiums

Ordering Code: TCVDPrice: $1249 List

Ordering Code: TCVAPrice: $1870 List

Ordering Code: TCVCPrice: $2700 List

Ordering Code: TCVBPrice: $628 List


Ordering Code: TCVPrice: $1164 List



C R A F T - M A I D


Hand Carved Doors Must Add Appropriate Wood & Finish Premiums (Door Premiums Included)

Ordering Code: TCDDPrice: $2039 List Ordering Code: TCDA

Price: $2606 List

Ordering Code: TCDCPrice: $3497 List

Ordering Code: TCDBPrice: $1850 List




Accoutrements

Q-39


Hand Carved Grape ClusterMay be applied to a Valance or the face of a Wood Hood

(Note: Cost of Valance or Hood is additional)Must Add Appropriate Wood & Finish Premiums

Ordering Code: TCCC

Price: $1164 List (up to 7" square)




C R A F T - M A I D

TABLE - STYLE A24" X 24" - 34 1/2" HIGH

Includes: 4 x 4 Legs. One Working drawer. One False Drawer. Bottom shelf (V-Groove) with 1 1/2" skirt. Lambs Tongue Brackets attached to flat surfaces of Legs. Finished 2 sides only-as shown. (Typically used at the end of a run) Specify left or right side to be finished. Top by others. (See Section P - Moulding, Panels & Misc. for Optional Wood Tops)

Code: TABLEA2424 Price: $3789 (To Finish Additional Sides) Code: TABLEAAS Price: $381 per side

Note: Shelf is flush to outside edge on unfinished sides.

24"

24"

34 1/2"



Accoutrements

Q-41

TABLE - STYLE B34" X 64" - 30" HIGH

Includes: 4 x 4 Legs. Two Working drawers. (Front) Two False Drawer Fronts. (one left & one right) Bottom shelf (V-Groove) with 1 1/2" skirt. Lambs Tongue Brackets attached to flat surfaces of Legs and between Drawers. Finished 3 sides only. (as shown) Back has Plain Panel & no Corbel Brackets so table can be set flush against back of Island or wall. Top by others. (See Section P-Moulding, Panels & Misc. for Optional Wood Tops)

Code: TABLEB3464 Price: $5250

(To Finish the fourth side) Code: TABLEBAS Price: $504

30"

64"

34"

Note: Shelf is f lush to outs ide edge on unfinished side.



C R A F T - M A I D

TABLE - STYLE C34" X 64" - 30" HIGH

Includes: 4 x 4 Legs. Four Working Drawers. (2 Front and 2 Back - 14" Deep) Two False Drawer Fronts. (one left & one right) Bottom Shelf (V-Groove) with 1 1/2" skirt. Lambs Tongue Brackets attached to flat surfaces of Legs and between Drawers. Finished all 4 sides. Top by others. (See Section P-Moulding, Panels & Misc. for Optional Wood Tops)

Code: TABLEC3464 Price: $5935

30"

64"

34"



Accoutrements

Q-43

TABLE - STYLE D24" X 48" - 34 1/2" HIGH

Includes: Four Working Drawers. (2 Front and 2 Back) Two False Drawers. Bottom Shelf (V-Groove) with 1 1/2" skirt. Finished 3 sides only. (Typically used at the end of an Island) Specify left or right side to be finished. Top by others. (See Section P-Moulding, Panels & Misc. for Optional Wood Tops)

Code: TABLED2448 Price: $5658

(To Finish Fourth Side) Code: TABLEDAS Price: $458)

Corbel Bracket

24"

48"15"

34 1/2"



C R A F T - M A I D

QUEEN ANNE VANITY TABLEWIDTH 36" - 39" - 42"

HEIGHT 32" DEPTH 21"

Includes: Four Queen Anne Legs. Four Working Drawers and one Door. (Specify left or right hinging) Left and Right sides have Fixed Door in Frame. Chamfered Stiles. Top by others. (See Section P-Moulding, Panels & Misc. for Optional Wood Tops)

Note: Back is not finished as standard - Finished back must be ordered if desired.

Code: Price: TABLEQA36 $3738 TABLEQA39 $3792 TABLEQA42 $3850

32"

15"

14 3/4"

36" - 39" - 42"



Accoutrements

Q-45

Serpentine DeskIncludes Custom Serpentine Drawer Fronts (Convex), Queen Anne Legs and 3/4" Solid Wood Topwith Serpentine Front to match.Note: Drawer Fronts are Veneer only.Available 36", 42" and 48" wide.

Code: Price:SERD36 $7152SERD42 $7389SERD48 $7625

Note: Serpentine Drawers are available in Concave or Convex. Can be included in other areas such as an island in a kitchen, a furniture piece, a vanity or a hutch.

Concave--Dovetailed Corner Convex--Dovetailed Corner

5"

24 1/2 "

29 1/2"

2 11/16"2 11/16"

6" variesvaries

variable36"- 42"- 48"

24"

Finish Back

Top View



C R A F T - M A I D

FIREPLACE MANTEL

6" HIGH - 6 3/4" DEEP - WIDTH IS VARIABLE

3 1/4"

2"

6"

3/4"

3/4"x 3/4" Cove

Standard Crown

Colonial Base Board

Solid Wood With Profiled Edge

6 3/4"

Solid

6"

5 7/8"

Variable up to 84"

Code: FPM Price: $26 per linear inch



Accoutrements

Q-47

FIREPLACE SURROUND

Width 48" to 84"

Includes 8" deep Solid Wood top with o Gee edge profile as standard. Fluted Onlays left and right with 4 flutes as standard (3/8" wide flutes unless otherwise specified).3" deep returns left and right.Victorian Moulding in center section. Available with Large Crown or Crown with Dentil.

Code: FPSCD (Crown with Dentil) Price: $49 per linear inch Code: FPSLC (Large Crown) Price: $46 per linear inch

DM Moulding

Crown w/ DentilCrown w/ Dentil

Specify

6"

Large Crown

48" to 84"

Victorian Moulding17"

Fluted Onlay

Fluted Onlay



C R A F T - M A I D

Design Tip: To finish the top of the fireplace surround, you might consider adding Crown Mldg. or stacking mouldings as shown above. See Moulding section for other Crown choices.

Crown Mldg.

Crown w/ Dentil

Custom Fireplace Surround

63" wide x 88" high x 3" deep w/ 27" x 27" hearth opening shown. Available up to 72" wide x 96" high. Crown w/ Dentil for Mantel. SDM Mldg. above fireplace opening..

Code: CFPS Price: $107 per linear inch

63"

88"All Wainscot Panelsare 3/4" thick

SDM Mldg.

7" 9" 7"9"

3"3/4"

7" 9" Top View

Crown w/ Dentil

Specify



Accoutrements

Q-49

PEDIMENTS

2"

1"

3/4"

DM Moulding

Standard Crown

Available widths--24",30",36",42",48", 54" and 60" Up to 25" deep returns left and right--must specify.

3 3/4"

3 3/4"

Pediment Closed

Pediment Open

Pediment Open with Finial

Code: Price:PEDC24 $1463PEDC30 $1580PEDC36 $1696PEDC42 $1812PEDC48 $1928PEDC54 $2144PEDC60 $2260

Code: Price:PEDOF24 $1863PEDOF30 $1979PEDOF36 $2095PEDOF42 $2211PEDOF48 $2327PEDOF54 $2543PEDOF60 $2660

Code: Price:PEDO24 $1663PEDO30 $1779PEDO36 $1895PEDO42 $2012PEDO48 $2128PEDO54 $2344PEDO60 $2460

9"

11"

12"

3 3/4"



C R A F T - M A I D

FINIALS

Available in Paint Grade, Maple, Cherry, Red Oak and Mahogany.

Ordering Code: FINAPrice: $72

Available in Paint Grade, Maple, Cherry and Red Oak.

Ordering Code: FINB Price: $58


Ordering Code: FINCPrice: $58


Ordering Code: FINDPrice: $59

Style A Style B

Style DStyle C



Accoutrements

Q-51

ENKEBOLL ARCHITECTURAL WOODCARVINGS

The Dealer may incorporate Corbels, Onlays etc. from the Raymond Enkeboll Designs Catalog. CRAFT-MAID WILL ORDER ALL PRODUCT FROM ENKEBOLL. Delivery may be affected by Enkeboll's lead time. Contact Raymond Enkeboll Designs for their current catalog at 310-532-1400 (Fax: 310-532-2042)

Note: Formula for figuring Craft-Maid list price-Enkeboll's list price x 1.14, then divide by your current multiplier = Craft-Maid list price.

Example: Enkeboll's list is $100 x 1.14 = $114-Then divide by your current multiplier = Craft-Maid list price.

Revised 2/28/2005



C R A F T - M A I D

ROSETTE ONLAYS

Code: ROB Price: $122 Size: 4 1/2" x 2 3/16"

Code: ROC Price: $122 Size: 2" Code: ROD Price: $122 Size: 2 3/4"

Code: ROE Price: $122 Size: 2 1/4"

Code: ROF Price: $122 Size: 3 1/2" x 1 1/2"

Code: ROG Price: $122Size: 2 1/2" x 1 1/4"

Code: ROA Price: $122 Size: 2 1/4"



Accoutrements

Q-53

Plain Block Routed Rosette-A

3/4" or 1 1/4" thick Solid Wood BlockRouted into 3/4" thick Solid Wood Block (Diameter of Rosette is 3")

Code: PB34 Price: $46 each Code: PB114 Price: $80 each

Code: ROSRAPrice: $104each(Does not include block)

6" x 6" Maximum

Routed Rosette-BRouted into 3/4" thick Solid Wood Block (Diameter of Rosette is 2 1/2")Code: ROSRBPrice: $104 each(Does not include block)

Routed Rosette-CRouted into 3/4" thick Solid Wood Block (Diameter of Rosette is 2 1/2")Code: ROSRCPrice: $104 each(Does not include block)



C R A F T - M A I D

#550 Bun Feet

5"w x 4"h

Code: BUNFL (Loose)Price: $101 each

Code: BUNFA (Attached)Price: $155 each

Country French Foot

4"w x 4"h

Code: CFFL (Loose)Price: $101 each

Code: CFFA (Attached)Price: $155 each

4"

5"

4"

4"

5"

4"5"or6"

4"

#552 Bun Feet (Reeded)

5 "w x 4"h

Code: BUNFRL (Loose)Price: $101 each

Code: BUNFRA (Attached)Price: $155 each

#556 Turned Toe Leg

4"w x 4", 5" or 6" high

Code: TTLL (Loose)Price: $101 each

Code: TTLA (Attached)Price: $155 each

4"

1 3/4"



Accoutrements

Q-55

TOE LEG #101

Code: TLL101 (Loose)Price: $243 each

Code: TLA101 (Attached)Price: $297 each

TOE LEG #102



TOE LEG #103



TOE LEG #104





C R A F T - M A I D

TOE LEG #105



TOE LEG #107



TOE LEG #108

Code: TLL108(Loose)Price: $203 each


TOE LEG #106





Accoutrements

Q-57

TOE LEG #109



TOE LEG #110





C R A F T - M A I D

Lambs Tongue

Code: LAMTPrice: $134 each(price does not include block)

5 1/2"

Keystone Block3/4" Solid Wood Block

Code: KBPrice: $104

4 1/4"

2 3/4"

3 1/4"



Accoutrements

Q-59

TABLE LEGENGLISH

3" X 3" X UP TO 34 1/2"CODE : TLE3PRICE : $562

4" X 4" X UP TO 34 1/2"CODE : TLE4PRICE : $624

5" X 5" X UP TO 34 1/2"CODE : TLE5 PRICE : $784

TABLE LEGROUND BASE

3" X 3" X UP TO 34 1/2"CODE : TLRB3 PRICE : $562



TABLE LEGTAPERED

3" X 3" X UP TO 34 1/2"CODE : TLT3PRICE : $562

4" X 4" X UP TO 34 1/2"CODE : TLT4PRICE : $624

5" X 5" X UP TO 34 1/2"CODE : TLT5 PRICE : $784

TABLE LEGSQUARE BASE

3" X 3" X UP TO 34 1/2"CODE : TLSB3 PRICE : $562



TURNINGS

NOTE : MUST ADD WOOD AND FINISH PREMIUMS. MUST SPECIFY HEIGHT.



C R A F T - M A I D

TURNINGS


FLUTED TURNING

3" X 3" X UP TO 34 1/2"CODE : TCTF3 PRICE : $729



TABLE LEG

1 3/8" X 1 3/8" X UP TO 24"CODE : COLT1PRICE : $177

2" X 2" X UP TO 34 1/2"CODE : COLT2 PRICE : $365

REEDED TURNING

3" X 3" X UP TO 34 1/2"CODE : TCTRE3 PRICE : $729



TABLE LEG

3" X 3" X UP TO 34 1/2"CODE : TLC3 PRICE : $562

4" X 4" X UP TO 34 1/2"CODE : TLC4PRICE : $624

5" X 5" X UP TO 34 1/2"CODE : TLC5PRICE : $784



Accoutrements

Q-61

LEFT BARLEY TWISTED ROPETURNING STYLE A

3" X 3" X UP TO 34 1/2"CODE : TCTTRA3(L) PRICE : $729



RIGHT BARLEYTWISTED ROPETURNING STYLE A

3" X 3" X UP TO 34 1/2"CODE : TCTTRA3(R) PRICE : $729

4" X 4" X UP TO 34 1/2"CODE : TCTTRA4 (R) PRICE : $795

5" X 5" X UP TO 34 1/2"CODE : TCTTRA5 (R) PRICE : $951

LEFT TWISTED ROPETURNING STYLE B

3" X 3" X UP TO 34 1/2"CODE : TCTTRB3 (L) PRICE : $729



TURNINGS


RIGHT TWISTED ROPETURNING STYLE B3" X 3" X UP TO 34 1/2"CODE : TCTTRB3 (R) PRICE : $729

4" X 4" X UP TO 34 1/2"CODE : TCTTRB4 (R) PRICE : $795

5" X 5" X UP TO 34 1/2"CODE : TCTTRB5 (R) PRICE : $951



C R A F T - M A I D

TURNING

3" X 3" X UP TO 34 1/2"CODE : TURN302 PRICE : $562



DEVONSHIRE

3" X 3" X UP TO 34 1/2"CODE : TCTD3 PRICE : $562



TURNING

3" X 3" X UP TO 34 1/2"CODE : TURN301PRICE : $562



TURNING




TURNINGS




Accoutrements

Q-63

TURNING




TURNING




TURNING




TURNING




TURNINGS




C R A F T - M A I D

TURNING




TURNING




TURNING




TURNING




TURNINGS




Accoutrements

Q-65

TURNING




TURNING

3" X 3" X UP TO 34 1/2"CODE : TURN313(L)PRICE : $729

4" X 4" X UP TO 34 1/2"CODE : TURN413 (L) PRICE : $795

5" X 5" X UP TO 34 1/2"CODE : TURN513 (L)PRICE : $951

TURNING

3" X 3" X UP TO 34 1/2"CODE : TURN313(R)PRICE : $7294" X 4" X UP TO 34 1/2"CODE : TURN413(R) PRICE : $795

5" X 5" X UP TO 34 1/2"CODE : TURN513(R)PRICE : $951

TURNING




TURNINGS




C R A F T - M A I D

TURNING




TURNING


4" X 4" X UP TO 34 1/2"CODE : TURN416(L) PRICE : $795


TURNING


4" X 4" X UP TO 34 1/2"CODE : TURN416 (R) PRICE : $795


TURNING




TURNINGS




Accoutrements

Q-67

TURNING


4" X 4" X UP TO 34 1/2"CODE : TURN417(R) PRICE : $795


TURNING




TURNING




TURNING




TURNINGS




C R A F T - M A I D

TURNING




TURNING




TURNING




TURNING




TURNINGS




Accoutrements

Q-69

TURNING




TURNING




TURNING




TURNING




TURNINGS




C R A F T - M A I D

TURNING




TURNING




TURNING




TURNING




TURNINGS




Accoutrements

Q-71

TURNING




TURNING




TURNING




TURNING




TURNINGS




C R A F T - M A I D

TURNING




TURNING




TURNING




TURNING




TURNINGSNOTE : MUST ADD WOOD AND FINISH PREMIUMS. MUST SPECIFY HEIGHT.



Accoutrements

Q-73

TURNING




TURNING




TURNING




TURNING




TURNINGSNOTE : MUST ADD WOOD AND FINISH PREMIUMS. MUST SPECIFY HEIGHT.



C R A F T - M A I D

TURNING




TURNING




TURNING




TURNING




TURNINGS




Accoutrements

Q-75

TURNING




TURNING




TURNING




TURNING




TURNINGS




C R A F T - M A I D

TURNING




TURNINGS




Accoutrements

Q-77

Design Your Own Turning If you require a turning that is different from those shown, you can create your own unique design. Fax your drawing to Craft-Maid for a quote. Scale: One Block = 1"

5" 4" 3"



C R A F T - M A I D

Pie Cut in Turned Leg or Post for applying to cabinet corner

Code: CT3/4 Price: $101 each, plus the cost of the full turningCode: ATPrice: $77 to attach each turning

Front

Cabinet End

Front

Cabinet End

Integral Stile

Front

Cabinet End Integral Stile

Turning cut in half for applying toextended stile, integral stile or filler

Code: CT1/2Price: $101 each, plus the cost of the full turningCode: ATPrice: $77 to attach each turning

Turning cut into quarters for applying to inside corner

Code: CT1/4Price: $101 each, plus the cost of the full turningCode: ATPrice: $77 to attach each turning

Must add wood and finish premiums

Must add wood and finish premiums

Must add wood and finish premiumsMust add the cost of the integral stile

Must add the cost of the extended stile, integral stile or filler



Accoutrements

Q-79

Filler with finished return attached to cabinet side creating a 90° inside corner (For turned leg or post)Adds to overall width of cabinet. (See example below)

Code: Price: (includes price of filler)AFW (Wall) $335AFB (Base) $398AFTS (Tall-Shallow) $618AFTD (Tall-Deep) $840

Example: 24" wide cabinet + 3" filler = 27" O.A.

24"

Specify

Specify



C R A F T - M A I D

Custom Bench SeatCustom Bench is 24" deep x 38" high. Available 48" wide with two working drawers or 60" wide with three working drawers.

Code: CBS48 Price: $6151 (w/ 2 working drawers)Code: CBS60 Price: $7916 (w/ 3 working drawers)

6"

2"

6"

12"

3/4"

38"

60" wide shown

24"

Top = 3/4" x 24 9/16

" x 61 1/8

"

Top = 3/4" x 2 9/16

" x 61 1/8

"

3/4"

19 1/4"

1" Square Dowels

2" Stiles & Rails

Apply SDM Mldg. to bottom of bottom rail on front, left & right.

SDM Mldg.

SDM Mldg.



Accoutrements

Q-81

Custom Beaded BenchCustom Bench is 24" deep x 38" high. Available 48" wide with 2 working drawers or 60" wide with 3 working drawers. Back is Beaded on 3" centers.

Code: CUSTBB48 Price: $3416Code: CUSTBB60 Price: $4529

Beaded Back

38"Top = 3/4" x 2 9/16

" x 49 1/8

"

Top = 3/4" x 24 9/16

" x 49 1/8

"

6"

3/4"

24"48" wide shown

18"

3/4"

19 1/4"

BullnoseEdge



C R A F T - M A I D

FRETWORK VALANCE

Available for cabinet widths of 30", 36" & 42"(Frame opening widths of 27", 33" and 39" only)

Fretwork Valance is routed into back of frame and set back 3/8" from face of frame.Includes Keystone Block. (Fretwork Valance is 3/4" thick)

Code:FV30 Price: $1985 FV36 Price: $2183 FV42 Price: $2400

Note: Must add wood and finish premiums



Accoutrements

Q-83

5"5" 5"

5"

10 1/2" 10 1/2"

9"

9"

22 1/2"

34 1/2"

80"

36"

Interior House Door

1 3/8" Thick Interior Door, as shown, with 4 panels on front and 4 panels on back. Available in all door styles and wood species. Also available with 5 or 6 panels (Supply sketch). Add ap-propriate door, wood and finish premiums.Note: Each Panel = 2 Door Premiums.

Code: IDPrice: $.74 per square inch

Shown with 4 panels per side--(8 total door premiums)



C R A F T - M A I D

THIS PAGE LEFT BLANK INTENTIONALLY.



Accoutrements

Q-85

Kessebohmer

KESSEBOHMER Arena Champagne Accessories

The unique combination of a simulated maple look over a wooden shelf base with an exclusive metal railing in a

champagne finish.The material is extremely durable, easy to maintain, fluid resistant and antibacterial according to the manufacturer.



C R A F T - M A I D



Accoutrements

Q-87

Kessebohmer



C R A F T - M A I D



Accoutrements

Q-89

Kessebohmer



C R A F T - M A I D



Accoutrements

Q-91

Kessebohmer



C R A F T - M A I D



Accoutrements

Q-93

Kessebohmer



C R A F T - M A I D



Accoutrements

Q-95

Kessebohmer



C R A F T - M A I D

THIS PAGE LEFT BLANK INTENTIONALLY.



Accoutrements

Q-97

Kessebohmer

KESSEBOHMER

Chrome Accessories

The following pages offer a wide range of built-in fitting systems for our cabinetry.

Many are available with the SoftStopp glide action andAnti-Slip surfaces.

Please contact the factory for assistance with specifications and pricing



C R A F T - M A I D



Accoutrements

Q-99

Kessebohmer



C R A F T - M A I D



Accoutrements

Q-101

Kessebohmer



C R A F T - M A I D



Accoutrements

Q-103

Kessebohmer



C R A F T - M A I D



Accoutrements

Q-105

Kessebohmer



C R A F T - M A I D



Accoutrements

Q-107

Kessebohmer



C R A F T - M A I D



Accoutrements

Q-109

Kessebohmer



C R A F T - M A I D



Accoutrements

Q-111

Kessebohmer



C R A F T - M A I D



Accoutrements

Q-113

Kessebohmer



C R A F T - M A I D



Accoutrements

Q-115

Kessebohmer



C R A F T - M A I D



Accoutrements

Q-117

Kessebohmer



C R A F T - M A I D



Accoutrements

Q-119

KESSEBOHMER &

HUWILIFT

Door Lift Fittings

The unique feature of the “Mechanical Lift”

allows you to lift the door up and stop it in any position.

Can be used with Wood Doors, Frame Doors or Aluminum Doors.



C R A F T - M A I D



Accoutrements

Q-121



C R A F T - M A I D



Accoutrements

Q-123

SLIDING CLOSET DOORS

COMPLETE CUSTOM MADE SLIDING CLOSET DOOR SYSTEMS OF WOOD GRAIN VENEERS, FROSTED GLASS

AND MIRROR.

MADE TO FIT ALL SIZE OPENINGS OR ENCLOSE ALL SIZE

INTERIOR SPACES.

3 FINISHES: BRUSHED ALUMINUM, BRUSHED GOLD, BRUSHED LIGHT BROWN



C R A F T - M A I D



Accoutrements

Q-125

SLIDING CLOSET DOORS

BASIC LIST PRICE SCHEDULE

accoutrements

Documents

caccoutrements q

base unit chrome pullout

base comfort chrome

chrome pantry pullout

chrome accessories

chrome pantry depot

hand carved corner tall

reeded onlay