Achieve Ultimate Performance on Tungsten CarbideNEW Norton Paradigm peel and pinch diamond grinding wheels attain the longest life, most consistent power draw, and fastest cut rate – to produce exceptional finished tools.

FeATUres & BeneFiTs ❚ High grain retention ensures long life ❚ Low specific energy delivers faster cut rate

❚ Self-sharpening abrasive design promotes consistent power draw ❚ Truable online and offline for maximum productivity

#8,715,381

ScaN thiS QR codE With youR SmaRtPhoNE to SEE a DemonsTrATion ViDeo

OnLine Truing & DreSSing CapabiLiTy LOwer TOOLing COST | beTTer eDge QuaLiTy

diamoNd WhEElS foR PEEl aNd PiNch GRiNdiNG

roUnD Tool GrinDinG

This document is provided solely for the purpose of proofing and is not to be considered the final artwork.

diamoNd WhEElS foR PEEl aNd PiNch GRiNdiNG

mADe-To-orDer AVAilABiliTyall norton paradigm diamond wheels are made to your precise requirements.

norton paradigm wheels are available up to 16" in diameter in many peel and pinch wheel shapes including 1b1, 1M1, 3b9, and 3M9.

GenerAl APPliCATion PArAmeTerswheel Speed: 12,000-19,500 SFpMinfeed rate: up to ½" per minutepart Speed: 200-1,000 rpMDepth of Cut: up to 0.100"Truing/Dressing parameters:

norton paradigm peel and pinch wheels may be trued with an 80 to150 grit silicon carbide truing wheel. For optimal results the truing wheel should be run 3 to 8X faster than the paradigm wheel.

Coolant: neat oil

DiAmonD sTArTinG sPeCiFiCATions For TUnGsTen CArBiDeThese wheel specifications may be used in a pinch or peel set-up. norton paradigm wheels are used only as the roughing wheel in a pinch set-up. and the only wheel in a peel set-up. SD220-i176-p100CSD320C-H176-p100CSD320-H176-p100C

Case study – CarbideApplicAtion: blank prep 18mm drillsMAchine: 4-axis CnC OD grindernorton product: 3b9p

10" x 0.8" x 1-1/4" norton paradigm SD320-H176-p100C

incuMbent product: 220 grit diamond hot-press metal bondresults: The norton paradigm wheel showed 2.5X wheel life

due to greater corner holding capability.

INCUMBENT

GRAM

S

NORTON PARADIGM

MATERIAL REMOVED BEFORE RETRUE

010,00020,00030,00040,00050,00060,00070,00080,00090,000

priOr TO OrDer enTry, pLeaSe COnTaCT yOur nOrTOn repreSenTaTive FOr SpeCiFiCaTiOn reCOMMenDaTiOnS TO enSure MaXiMuM grinDing perFOrManCe, QuOTaTiOnS, anD CurrenT LeaD-TiMeS.

norton Paradigm 320 grit Traditional metal Bond 320 grit

The Paradigm shift increase productivity/decrease costs: ❚ up to 46% porosity ❚ + > 2:1 diamond to bond ratio ❚ + metal matrix forms an ionic bond with the diamond particles ❚ + finer grits and more working particles with higher exposure ❚ = lower cutting energies with highest quality part edges and finish

www.facebook.com/nortonindustrial | www.youtube.com/nortonindustrial | www.nortonindustrial.com

UsA CUsTomer serViCe:Toll Free phone: 1 (800) 551-4413Toll Free Fax: 1 (800) 551-4416

CAnADA CUsTomer serViCe:Toll Free phone: 1 (800) 263-6565Toll Free Fax: 1 (800) 561-9490

Form #8457 © Saint‑Gobain august 2014.Norton, G‑force, and Paradigm are registered trademarks; a Paradigm Shift in cutting tool manufacturing is a trademark of Saint‑Gobain abrasives.

PRimaRy SPoNSoR

BesT nOrTOn paradigm

BeTTer nOrTOn g-Force

GooD nOrTOn b610 / b80

This document is provided solely for the purpose of proofing and is not to be considered the final artwork.