achieving optimum balance for maximum value industrial … · 2012-08-23 · top impeller has...
TRANSCRIPT
Housing Ductile Iron
316 Stainless Steel
Housing Bearing DU*
Carbon
Faceplate Ductile Iron
316 Stainless Steel
Faceplate Bearing Outboard Ball Bearing
Impellers Ductile Iron
316 Stainless Steel
Shafts 17-4 Stainless Steel
Gear case Gray Iron
*BRONZE IN MODEL 330
E n g i n e e r e d S o l u t i o n s
H e a v y D u t y P u m p s f o r T o u g hA p p l i c a t i o n s
A c h i e v i n g O p t i m um B a l a n c e f o r M a x i m um Va l u e
General Applications:
1. Chemical Processing – Synthetic fibers and films,
superphosphoric acid, adhesives
2. Pulp and Paper – Black liquor soap, paper coatings
3. Construction Materials – Silicon caulk, wall board
taping compound, limestone filled asphalt for
roof shingles
4. Meat Processing – Ground meats, fats, casings,
byproducts for rendering, waste products
5. Food Processing – Chocolate, candy mass and gels,
peanut butter, corn syrup, molasses, lecithin,
sugar magma
6. Oil Exploration and Refining – Slop oil, API 674
reciprocating pumps, crude oil
7. Plastics Composite Parts Manufacturing –
Filled plastics molding compounds
8. Wastewater Treatment – Polymers, dissolved air
flotation skimming, scum, sludge
I N D U S T R I A L D U T Y P R O C E S S P U M P S
STANDARD MATERIALS OF CONSTRUCTION
1. Top impeller has started suction cycle and is
completing the discharge cycle. Lower impeller
is transferring liquid from the suction to the
discharge side of the pump.
2. Top impeller completes suction cycle.
Lower impeller starting to discharge.
3. Top impeller is transferring liquid from suction to
discharge. Lower impeller has started the suction
cycle and is finishing the discharge cycle.
4. Top impeller starting discharge cycle.
Lower impeller finishing suction cycle.
NO METAL-TO-METAL CONTACT IN THE COMPLETELY ISOLATED FLUID CHAMBER
1 2 3 4
ww
w.t
uth
illp
um
p.c
om
E n g i n e e r e d S o l u t i o n s
To find an authorized distributor, visit www.tuthillpump.com/distributors
Tuthill Pump Group12500 South Pulaski RoadAlsip, Illinois 60803 USAphone: 708-389-2500 / fax: 708-388-0869email: [email protected]
Tuthill Pump Group5143 Port Chicago HighwayConcord, California 94520 USAphone: 925-676-8000 / fax: 925-676-8151email: [email protected]
Tuthill Pump GroupBirkdale CloseManners Industrial EstateIlkeston, Derbyshire DE7 8YA Englandphone: 44.115.932.5226 / fax: 44.115.932.2526email: [email protected]
Tuthill EuropeParc industriel Wavre NordAvenue Vésale, 30 - 1300 Wavre - Belgiumphone: 32 10 22 83 34 / fax: 32 10 23 82 40email: [email protected]
Tuthill Latin America255 Alhambra Circle, Suite 320Coral Gables, Florida 33134 USAphone: 305-740-3381 / fax: 305-740-9328email: [email protected]
Tuthill Australia19/21 Milton Park, 128 Canterbury RoadKilsyth, Victoria, 3137, Australiaphone: 61 3 9720 6533 / fax: 61 3 9720 6880email: [email protected]
Tuthill ChinaRoom 1507, Harbour Ring PlazaNo. 18 Xi Zang Zhong RoadShanghai, 200001, P.R. Chinaphone: 86 21 53853369 / fax: 86 21 53853365 email: [email protected]
TUT12702 8/12
Developing new energy sources from bio-
fuels, coal, and waste products presents
special pumping challenges. Some of the
applications where HD pumps have been
applied include:
1. Biodiesel – Soybean soap stock
2. Ethanol – Spent mash
3. Coal water and coal oil slurries
4. Energy Recovery –
Waste oil burner feed
Tuthill HD Pumps are used in many diverse markets for challenging applications.
Below is a partial list of markets and applications served:
Tuthill offers the HD Series
for the most demanding
applications – slurries,
high viscosity products,
suspended solids, concen-
trated acids, chemicals,
high temperature liquids,
sludge, resins, sewage
and scum, paints,
polymers, plastics, pharma-
ceuticals, foods, and shear
sensitive fluids.
This Rotary Positive
Displacement,
Circumferential Piston
pump is Tuthill’s
severe-duty problem
solver. Heavy-Duty
Construction provides
longer life in
the toughest
pumping applications.
HD
PR
OC
ES
SP
UM
PS HD HEAVY DUTY
CIRCUMFERENTIAL PISTON PUMPS
A CLASSIC DESIGN WITH LEGENDARY PERFORMANCE
The secret behind the HD’s success is external bearing support on both sides of the
impellers which enables the pump to handle high pressure, and pressure spikes
associated with sudden surges of viscous mass. The load diagrams below show the
rigid HD design compared to cantilevered designs with shaft deflections that can
result in galling and seizing of the pump.
External timing gears in separate oil filled reservoir
provide safe, non-contact synchronous impeller action.
Oil lubricated roller bearings provide support for maximum radial
loading in models 70A, 120A, 330 and 600.
Constant diameter shafts (no steps in torque transmission areas) for
maximum strength and minimum deflection.
Housing bushing, positioned under maximum radial load, assuring
minimum shaft deflection.
A selection of sealing solutions is offered including Tuffseall,
heavy duty mechanical seals, and packing.
Impellers provided in single lobe or double lobe design.
No metal to metal contact in the fluid chamber.
Housing and gear case are foot mounted to minimize
distortion and vibration.
Heavy duty, grease lubricated, double-row ball bearings for
combined radial loading and axial positioning.
Casings and gear case are precision machined and dowel pin
aligned. Procedure results in full interchangeability should field
replacement be required.
DOUBLE LOBE IMPELLERS
SINGLE LOBEIMPELLERSSingle lobe impellers provide maximum strength for highly viscous fluidsand slurries, and high discharge pressure as wellas minimal shear charac-teristics on the fluids.
EXTERNAL TIMING GEARSUse of timing gears eliminates metal to metal contact in the fluidchamber, reduces shear,and allows intermittent run dry without damage to the pump.
PORT SIZE PER MAX. DIFF. MAX. RPMT1 T2 100 REV. PRESSURE � PUMPING CP D L N O U X Y Z WEIGHT
MODEL IN. MM IN. MM GAL. LTR. PSI BAR ELEMENT � IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM LBS. KG.
30A 11/2 38 11/2 38 5.5 21 150 10.3 450 183/4 476 53/4 146 105/8 270 21/8 54 87/8 225 1 25 4 102 31/8 79 11/4 32 100 45
70A 3 76 2 51 15.0 57 450 31.0 450 243/8 619 81/2 216 125/8 321 31/2 89 131/4 337 17/8 48 61/4 159 43/4 121 21/2 64 280 127
120A 4 102 3 76 30.0 114 450 31.0 450 243/8 619 81/2 216 123/8 314 31/2 89 131/4 337 17/8 48 61/4 159 43/4 121 21/2 64 300 136
330 5 127 4 102 70.0 265 500 31.0 450 295/16 745 103/4 273 141/4 362 4 102 167/8 429 21/4 57 77/8 200 61/8 156 33/16 81 550 249
MODELS 30A, 2A, 3A, 70A, 120A & 330
MODEL 600
� CAUTION: THE FLUID BEING PUMPED MUST ALWAYS BE SPECIFIED. APPLICATIONS ABOVE 200 PSI/13.8 BAR, 350ºF/177ºC, OR 200 RPM MUST BE REVIEWED BY TUTHILL TO INSURE PROPER PUMP SELECTION.
� CAUTION: THE FLUID BEING PUMPED MUST ALWAYS BE SPECIFIED. APPLICATIONS ABOVE 200 PSI/13.8 BAR,350ºF/177ºC, OR 200 RPM MUST BE REVIEWED BY TUTHILL TO INSURE PROPER PUMP SELECTION.
� SUCTION AND DISCHARGE PORTS CAN BE REVERSED BY CHANGING SHAFT ROTATION
PORT SIZE PER MAX. DIFF. MAX. RPMT1 T2 100 REV. PRESSURE � PUMPING CP D L N O U X Y Z WEIGHT
MODEL IN. MM IN. MM GAL. LTR. PSI BAR ELEMENT � IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM LBS. KG.
600 6 152 6 152 148.0 560 450 31.0 450 369/16 929 133/4 349 189/16 471 57/16 138 201/4 514 21/2 64 9 229 9 229 31/2 89 900 408
MORE RECENT HD PUMP SEALING INNOVATIONS
Tuffseall™ cartridge lip seal technology has been successfully
applied to a number of HD pump applications to address the
requirements of leak free performance with intermittent run dry
conditions. Optional power monitors are offered as run dry
protection, and are recommended for use with single mechanical
seals where run dry conditions are possible.
Sealing Choices:
CUSTOMIZING YOUR HD PUMP
HD Pumps are very versatile and can be customized
to meet the requirements of specific applications.
Optional Features:• Heat Jackets
• Relief Valves
• Double Lobe Impellers for reduced pulsations with thin liquids
• Flanges including high pressure flanges
• Special Clearances
• High Temperature Construction
• Abrasive Fluid Special Construction
• Seal Choices
HD with bearing supporton both sides of impellers
Cantilevered designs andresulting shaft deflection
Performance Ranges:
Flow: Up to 650 GPM
Pressure: Up to 500 psi
Viscosity: Up to 4,400,000 cts
Temperature: Up to 525°F
Self Priming: Up to 14 feet
HEAVY DUTYSLURRY SERVICEMECHANICAL SEAL• Standard PTFE/graphite packing
• Food grade packing
• Packing with flush arrangements
• Tuffseall™
• Single or double slurry seals
• Solvent compatible o-rings
• Engineered packing or seal solutions
TUFFSEALLTM
has no springs to clogand no dynamic o-rings.
TUFFSEALLTM
features a positive drive,and wear resistant siliconcarbide sleeve.
Tuthill offers the HD Series
for the most demanding
applications – slurries,
high viscosity products,
suspended solids, concen-
trated acids, chemicals,
high temperature liquids,
sludge, resins, sewage
and scum, paints,
polymers, plastics, pharma-
ceuticals, foods, and shear
sensitive fluids.
This Rotary Positive
Displacement,
Circumferential Piston
pump is Tuthill’s
severe-duty problem
solver. Heavy-Duty
Construction provides
longer life in
the toughest
pumping applications.
HD
PR
OC
ES
SP
UM
PS HD HEAVY DUTY
CIRCUMFERENTIAL PISTON PUMPS
A CLASSIC DESIGN WITH LEGENDARY PERFORMANCE
The secret behind the HD’s success is external bearing support on both sides of the
impellers which enables the pump to handle high pressure, and pressure spikes
associated with sudden surges of viscous mass. The load diagrams below show the
rigid HD design compared to cantilevered designs with shaft deflections that can
result in galling and seizing of the pump.
External timing gears in separate oil filled reservoir
provide safe, non-contact synchronous impeller action.
Oil lubricated roller bearings provide support for maximum radial
loading in models 70A, 120A, 330 and 600.
Constant diameter shafts (no steps in torque transmission areas) for
maximum strength and minimum deflection.
Housing bushing, positioned under maximum radial load, assuring
minimum shaft deflection.
A selection of sealing solutions is offered including Tuffseall,
heavy duty mechanical seals, and packing.
Impellers provided in single lobe or double lobe design.
No metal to metal contact in the fluid chamber.
Housing and gear case are foot mounted to minimize
distortion and vibration.
Heavy duty, grease lubricated, double-row ball bearings for
combined radial loading and axial positioning.
Casings and gear case are precision machined and dowel pin
aligned. Procedure results in full interchangeability should field
replacement be required.
DOUBLE LOBE IMPELLERS
SINGLE LOBEIMPELLERSSingle lobe impellers provide maximum strength for highly viscous fluidsand slurries, and high discharge pressure as wellas minimal shear charac-teristics on the fluids.
EXTERNAL TIMING GEARSUse of timing gears eliminates metal to metal contact in the fluidchamber, reduces shear,and allows intermittent run dry without damage to the pump.
PORT SIZE PER MAX. DIFF. MAX. RPMT1 T2 100 REV. PRESSURE � PUMPING CP D L N O U X Y Z WEIGHT
MODEL IN. MM IN. MM GAL. LTR. PSI BAR ELEMENT � IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM LBS. KG.
30A 11/2 38 11/2 38 5.5 21 150 10.3 450 183/4 476 53/4 146 105/8 270 21/8 54 87/8 225 1 25 4 102 31/8 79 11/4 32 100 45
70A 3 76 2 51 15.0 57 450 31.0 450 243/8 619 81/2 216 125/8 321 31/2 89 131/4 337 17/8 48 61/4 159 43/4 121 21/2 64 280 127
120A 4 102 3 76 30.0 114 450 31.0 450 243/8 619 81/2 216 123/8 314 31/2 89 131/4 337 17/8 48 61/4 159 43/4 121 21/2 64 300 136
330 5 127 4 102 70.0 265 500 31.0 450 295/16 745 103/4 273 141/4 362 4 102 167/8 429 21/4 57 77/8 200 61/8 156 33/16 81 550 249
MODELS 30A, 2A, 3A, 70A, 120A & 330
MODEL 600
� CAUTION: THE FLUID BEING PUMPED MUST ALWAYS BE SPECIFIED. APPLICATIONS ABOVE 200 PSI/13.8 BAR, 350ºF/177ºC, OR 200 RPM MUST BE REVIEWED BY TUTHILL TO INSURE PROPER PUMP SELECTION.
� CAUTION: THE FLUID BEING PUMPED MUST ALWAYS BE SPECIFIED. APPLICATIONS ABOVE 200 PSI/13.8 BAR,350ºF/177ºC, OR 200 RPM MUST BE REVIEWED BY TUTHILL TO INSURE PROPER PUMP SELECTION.
� SUCTION AND DISCHARGE PORTS CAN BE REVERSED BY CHANGING SHAFT ROTATION
PORT SIZE PER MAX. DIFF. MAX. RPMT1 T2 100 REV. PRESSURE � PUMPING CP D L N O U X Y Z WEIGHT
MODEL IN. MM IN. MM GAL. LTR. PSI BAR ELEMENT � IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM LBS. KG.
600 6 152 6 152 148.0 560 450 31.0 450 369/16 929 133/4 349 189/16 471 57/16 138 201/4 514 21/2 64 9 229 9 229 31/2 89 900 408
MORE RECENT HD PUMP SEALING INNOVATIONS
Tuffseall™ cartridge lip seal technology has been successfully
applied to a number of HD pump applications to address the
requirements of leak free performance with intermittent run dry
conditions. Optional power monitors are offered as run dry
protection, and are recommended for use with single mechanical
seals where run dry conditions are possible.
Sealing Choices:
CUSTOMIZING YOUR HD PUMP
HD Pumps are very versatile and can be customized
to meet the requirements of specific applications.
Optional Features:• Heat Jackets
• Relief Valves
• Double Lobe Impellers for reduced pulsations with thin liquids
• Flanges including high pressure flanges
• Special Clearances
• High Temperature Construction
• Abrasive Fluid Special Construction
• Seal Choices
HD with bearing supporton both sides of impellers
Cantilevered designs andresulting shaft deflection
Performance Ranges:
Flow: Up to 650 GPM
Pressure: Up to 500 psi
Viscosity: Up to 4,400,000 cts
Temperature: Up to 525°F
Self Priming: Up to 14 feet
HEAVY DUTYSLURRY SERVICEMECHANICAL SEAL• Standard PTFE/graphite packing
• Food grade packing
• Packing with flush arrangements
• Tuffseall™
• Single or double slurry seals
• Solvent compatible o-rings
• Engineered packing or seal solutions
TUFFSEALLTM
has no springs to clogand no dynamic o-rings.
TUFFSEALLTM
features a positive drive,and wear resistant siliconcarbide sleeve.
Tuthill offers the HD Series
for the most demanding
applications – slurries,
high viscosity products,
suspended solids, concen-
trated acids, chemicals,
high temperature liquids,
sludge, resins, sewage
and scum, paints,
polymers, plastics, pharma-
ceuticals, foods, and shear
sensitive fluids.
This Rotary Positive
Displacement,
Circumferential Piston
pump is Tuthill’s
severe-duty problem
solver. Heavy-Duty
Construction provides
longer life in
the toughest
pumping applications.
HD
PR
OC
ES
SP
UM
PS HD HEAVY DUTY
CIRCUMFERENTIAL PISTON PUMPS
A CLASSIC DESIGN WITH LEGENDARY PERFORMANCE
The secret behind the HD’s success is external bearing support on both sides of the
impellers which enables the pump to handle high pressure, and pressure spikes
associated with sudden surges of viscous mass. The load diagrams below show the
rigid HD design compared to cantilevered designs with shaft deflections that can
result in galling and seizing of the pump.
External timing gears in separate oil filled reservoir
provide safe, non-contact synchronous impeller action.
Oil lubricated roller bearings provide support for maximum radial
loading in models 70A, 120A, 330 and 600.
Constant diameter shafts (no steps in torque transmission areas) for
maximum strength and minimum deflection.
Housing bushing, positioned under maximum radial load, assuring
minimum shaft deflection.
A selection of sealing solutions is offered including Tuffseall,
heavy duty mechanical seals, and packing.
Impellers provided in single lobe or double lobe design.
No metal to metal contact in the fluid chamber.
Housing and gear case are foot mounted to minimize
distortion and vibration.
Heavy duty, grease lubricated, double-row ball bearings for
combined radial loading and axial positioning.
Casings and gear case are precision machined and dowel pin
aligned. Procedure results in full interchangeability should field
replacement be required.
DOUBLE LOBE IMPELLERS
SINGLE LOBEIMPELLERSSingle lobe impellers provide maximum strength for highly viscous fluidsand slurries, and high discharge pressure as wellas minimal shear charac-teristics on the fluids.
EXTERNAL TIMING GEARSUse of timing gears eliminates metal to metal contact in the fluidchamber, reduces shear,and allows intermittent run dry without damage to the pump.
PORT SIZE PER MAX. DIFF. MAX. RPMT1 T2 100 REV. PRESSURE � PUMPING CP D L N O U X Y Z WEIGHT
MODEL IN. MM IN. MM GAL. LTR. PSI BAR ELEMENT � IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM LBS. KG.
30A 11/2 38 11/2 38 5.5 21 150 10.3 450 183/4 476 53/4 146 105/8 270 21/8 54 87/8 225 1 25 4 102 31/8 79 11/4 32 100 45
70A 3 76 2 51 15.0 57 450 31.0 450 243/8 619 81/2 216 125/8 321 31/2 89 131/4 337 17/8 48 61/4 159 43/4 121 21/2 64 280 127
120A 4 102 3 76 30.0 114 450 31.0 450 243/8 619 81/2 216 123/8 314 31/2 89 131/4 337 17/8 48 61/4 159 43/4 121 21/2 64 300 136
330 5 127 4 102 70.0 265 500 31.0 450 295/16 745 103/4 273 141/4 362 4 102 167/8 429 21/4 57 77/8 200 61/8 156 33/16 81 550 249
MODELS 30A, 2A, 3A, 70A, 120A & 330
MODEL 600
� CAUTION: THE FLUID BEING PUMPED MUST ALWAYS BE SPECIFIED. APPLICATIONS ABOVE 200 PSI/13.8 BAR, 350ºF/177ºC, OR 200 RPM MUST BE REVIEWED BY TUTHILL TO INSURE PROPER PUMP SELECTION.
� CAUTION: THE FLUID BEING PUMPED MUST ALWAYS BE SPECIFIED. APPLICATIONS ABOVE 200 PSI/13.8 BAR,350ºF/177ºC, OR 200 RPM MUST BE REVIEWED BY TUTHILL TO INSURE PROPER PUMP SELECTION.
� SUCTION AND DISCHARGE PORTS CAN BE REVERSED BY CHANGING SHAFT ROTATION
PORT SIZE PER MAX. DIFF. MAX. RPMT1 T2 100 REV. PRESSURE � PUMPING CP D L N O U X Y Z WEIGHT
MODEL IN. MM IN. MM GAL. LTR. PSI BAR ELEMENT � IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM LBS. KG.
600 6 152 6 152 148.0 560 450 31.0 450 369/16 929 133/4 349 189/16 471 57/16 138 201/4 514 21/2 64 9 229 9 229 31/2 89 900 408
MORE RECENT HD PUMP SEALING INNOVATIONS
Tuffseall™ cartridge lip seal technology has been successfully
applied to a number of HD pump applications to address the
requirements of leak free performance with intermittent run dry
conditions. Optional power monitors are offered as run dry
protection, and are recommended for use with single mechanical
seals where run dry conditions are possible.
Sealing Choices:
CUSTOMIZING YOUR HD PUMP
HD Pumps are very versatile and can be customized
to meet the requirements of specific applications.
Optional Features:• Heat Jackets
• Relief Valves
• Double Lobe Impellers for reduced pulsations with thin liquids
• Flanges including high pressure flanges
• Special Clearances
• High Temperature Construction
• Abrasive Fluid Special Construction
• Seal Choices
HD with bearing supporton both sides of impellers
Cantilevered designs andresulting shaft deflection
Performance Ranges:
Flow: Up to 650 GPM
Pressure: Up to 500 psi
Viscosity: Up to 4,400,000 cts
Temperature: Up to 525°F
Self Priming: Up to 14 feet
HEAVY DUTYSLURRY SERVICEMECHANICAL SEAL• Standard PTFE/graphite packing
• Food grade packing
• Packing with flush arrangements
• Tuffseall™
• Single or double slurry seals
• Solvent compatible o-rings
• Engineered packing or seal solutions
TUFFSEALLTM
has no springs to clogand no dynamic o-rings.
TUFFSEALLTM
features a positive drive,and wear resistant siliconcarbide sleeve.
Housing Ductile Iron
316 Stainless Steel
Housing Bearing DU*
Carbon
Faceplate Ductile Iron
316 Stainless Steel
Faceplate Bearing Outboard Ball Bearing
Impellers Ductile Iron
316 Stainless Steel
Shafts 17-4 Stainless Steel
Gear case Gray Iron
*BRONZE IN MODEL 330
E n g i n e e r e d S o l u t i o n s
H e a v y D u t y P u m p s f o r T o u g hA p p l i c a t i o n s
A c h i e v i n g O p t i m um B a l a n c e f o r M a x i m um Va l u e
General Applications:
1. Chemical Processing – Synthetic fibers and films,
superphosphoric acid, adhesives
2. Pulp and Paper – Black liquor soap, paper coatings
3. Construction Materials – Silicon caulk, wall board
taping compound, limestone filled asphalt for
roof shingles
4. Meat Processing – Ground meats, fats, casings,
byproducts for rendering, waste products
5. Food Processing – Chocolate, candy mass and gels,
peanut butter, corn syrup, molasses, lecithin,
sugar magma
6. Oil Exploration and Refining – Slop oil, API 674
reciprocating pumps, crude oil
7. Plastics Composite Parts Manufacturing –
Filled plastics molding compounds
8. Wastewater Treatment – Polymers, dissolved air
flotation skimming, scum, sludge
I N D U S T R I A L D U T Y P R O C E S S P U M P S
STANDARD MATERIALS OF CONSTRUCTION
1. Top impeller has started suction cycle and is
completing the discharge cycle. Lower impeller
is transferring liquid from the suction to the
discharge side of the pump.
2. Top impeller completes suction cycle.
Lower impeller starting to discharge.
3. Top impeller is transferring liquid from suction to
discharge. Lower impeller has started the suction
cycle and is finishing the discharge cycle.
4. Top impeller starting discharge cycle.
Lower impeller finishing suction cycle.
NO METAL-TO-METAL CONTACT IN THE COMPLETELY ISOLATED FLUID CHAMBER
1 2 3 4
ww
w.t
uth
illp
um
p.c
om
E n g i n e e r e d S o l u t i o n s
To find an authorized distributor, visit www.tuthillpump.com/distributors
Tuthill Pump Group12500 South Pulaski RoadAlsip, Illinois 60803 USAphone: 708-389-2500 / fax: 708-388-0869email: [email protected]
Tuthill Pump Group5143 Port Chicago HighwayConcord, California 94520 USAphone: 925-676-8000 / fax: 925-676-8151email: [email protected]
Tuthill Pump GroupBirkdale CloseManners Industrial EstateIlkeston, Derbyshire DE7 8YA Englandphone: 44.115.932.5226 / fax: 44.115.932.2526email: [email protected]
Tuthill EuropeParc industriel Wavre NordAvenue Vésale, 30 - 1300 Wavre - Belgiumphone: 32 10 22 83 34 / fax: 32 10 23 82 40email: [email protected]
Tuthill Latin America255 Alhambra Circle, Suite 320Coral Gables, Florida 33134 USAphone: 305-740-3381 / fax: 305-740-9328email: [email protected]
Tuthill Australia19/21 Milton Park, 128 Canterbury RoadKilsyth, Victoria, 3137, Australiaphone: 61 3 9720 6533 / fax: 61 3 9720 6880email: [email protected]
Tuthill ChinaRoom 1507, Harbour Ring PlazaNo. 18 Xi Zang Zhong RoadShanghai, 200001, P.R. Chinaphone: 86 21 53853369 / fax: 86 21 53853365 email: [email protected]
TUT12702 8/12
Developing new energy sources from bio-
fuels, coal, and waste products presents
special pumping challenges. Some of the
applications where HD pumps have been
applied include:
1. Biodiesel – Soybean soap stock
2. Ethanol – Spent mash
3. Coal water and coal oil slurries
4. Energy Recovery –
Waste oil burner feed
Tuthill HD Pumps are used in many diverse markets for challenging applications.
Below is a partial list of markets and applications served:
Housing Ductile Iron
316 Stainless Steel
Housing Bearing DU*
Carbon
Faceplate Ductile Iron
316 Stainless Steel
Faceplate Bearing Outboard Ball Bearing
Impellers Ductile Iron
316 Stainless Steel
Shafts 17-4 Stainless Steel
Gear case Gray Iron
*BRONZE IN MODEL 330
E n g i n e e r e d S o l u t i o n s
H e a v y D u t y P u m p s f o r T o u g hA p p l i c a t i o n s
A c h i e v i n g O p t i m um B a l a n c e f o r M a x i m um Va l u e
General Applications:
1. Chemical Processing – Synthetic fibers and films,
superphosphoric acid, adhesives
2. Pulp and Paper – Black liquor soap, paper coatings
3. Construction Materials – Silicon caulk, wall board
taping compound, limestone filled asphalt for
roof shingles
4. Meat Processing – Ground meats, fats, casings,
byproducts for rendering, waste products
5. Food Processing – Chocolate, candy mass and gels,
peanut butter, corn syrup, molasses, lecithin,
sugar magma
6. Oil Exploration and Refining – Slop oil, API 674
reciprocating pumps, crude oil
7. Plastics Composite Parts Manufacturing –
Filled plastics molding compounds
8. Wastewater Treatment – Polymers, dissolved air
flotation skimming, scum, sludge
I N D U S T R I A L D U T Y P R O C E S S P U M P S
STANDARD MATERIALS OF CONSTRUCTION
1. Top impeller has started suction cycle and is
completing the discharge cycle. Lower impeller
is transferring liquid from the suction to the
discharge side of the pump.
2. Top impeller completes suction cycle.
Lower impeller starting to discharge.
3. Top impeller is transferring liquid from suction to
discharge. Lower impeller has started the suction
cycle and is finishing the discharge cycle.
4. Top impeller starting discharge cycle.
Lower impeller finishing suction cycle.
NO METAL-TO-METAL CONTACT IN THE COMPLETELY ISOLATED FLUID CHAMBER
1 2 3 4
ww
w.t
uth
illp
um
p.c
om
E n g i n e e r e d S o l u t i o n s
To find an authorized distributor, visit www.tuthillpump.com/distributors
Tuthill Pump Group12500 South Pulaski RoadAlsip, Illinois 60803 USAphone: 708-389-2500 / fax: 708-388-0869email: [email protected]
Tuthill Pump Group5143 Port Chicago HighwayConcord, California 94520 USAphone: 925-676-8000 / fax: 925-676-8151email: [email protected]
Tuthill Pump GroupBirkdale CloseManners Industrial EstateIlkeston, Derbyshire DE7 8YA Englandphone: 44.115.932.5226 / fax: 44.115.932.2526email: [email protected]
Tuthill EuropeParc industriel Wavre NordAvenue Vésale, 30 - 1300 Wavre - Belgiumphone: 32 10 22 83 34 / fax: 32 10 23 82 40email: [email protected]
Tuthill Latin America255 Alhambra Circle, Suite 320Coral Gables, Florida 33134 USAphone: 305-740-3381 / fax: 305-740-9328email: [email protected]
Tuthill Australia19/21 Milton Park, 128 Canterbury RoadKilsyth, Victoria, 3137, Australiaphone: 61 3 9720 6533 / fax: 61 3 9720 6880email: [email protected]
Tuthill ChinaRoom 1507, Harbour Ring PlazaNo. 18 Xi Zang Zhong RoadShanghai, 200001, P.R. Chinaphone: 86 21 53853369 / fax: 86 21 53853365 email: [email protected]
TUT12702 8/12
Developing new energy sources from bio-
fuels, coal, and waste products presents
special pumping challenges. Some of the
applications where HD pumps have been
applied include:
1. Biodiesel – Soybean soap stock
2. Ethanol – Spent mash
3. Coal water and coal oil slurries
4. Energy Recovery –
Waste oil burner feed
Tuthill HD Pumps are used in many diverse markets for challenging applications.
Below is a partial list of markets and applications served: