acolyte 2014 catalog
DESCRIPTION
RIBBONLYTE | CHANNELS | FIXTURES | CONTROLLERS | DRIVERS | ACCESSORIES We are LEDs We are Lighting But above, all we make SOLUTIONS. www.acolyteled.comTRANSCRIPT
-
C O M P L E T E I N T E G R AT E D LED L IGHTING SOLUTIONS
-
iWe are Acolyte.
We exist because you have complex lighting needs. To meet those needs we provide cutting edge LED lighting technology, but we go a step further by providing the expert guidance to make sure that your vision becomes a reality.
Whether your project has grown in scope, your order needs to be changed, or the lights simply dont match the drapes; were here to make sure you get what you need, on time and on budget.
With changing times, we understand that your needs change as well. With that in mind, Acolyte will stand by its customers and its products through the mountains and valleys.
We make LEDs.We make lighting.But above all, we make SOLUTIONS.
-
iii
TA B L E O F C O N T E N T S
TA B L E O F CONTENTS
Company Background..............................................................................2
LED Fact Sheet........................................................................................12
RibbonLyte 14
Static White RibbonLyte.............................................................16 Variable White RibbonLyte........................................................46 Side-Illuminating RibbonLyte.....................................................60 Static Colors RibbonLyte............................................................66 RGB RibbonLyte..........................................................................92
RibbonLyte Fixtures...............................................................................114
Fixtures 168
Low Power Fixtures...................................................................170 High Power Fixtures..................................................................192 Entertainment Fixtures.............................................................210 Addressable Nodes....................................................................224
Drivers..................................................................................................234
Controllers............................................................................................258
Parts and Accessories............................................................................294
-
vP R O D U C T O V E R V I E W
H I G H P OW E R F I X T U R E SHigh Power Exterior Linear................................................................................193Square Lens Exterior Linear...............................................................................1973-in-1 RGB Exterior Linear.................................................................................201Round Projector...................................................................................................205
High Output Lyte Bar.............................................................................................171Medium Exterior Linear...........................................................................................175Rigid Connectable AC............................................................................................179NeonLyte...............................................................................................................183Flat Neon..................................................................................................................187
AT3.. . . . . . . . . . . . . . . . . . . . . 149AV1. . . . . . . . . . . . . . . . . . . . . . . . 151AP1. . . . . . . . . . . . . . . . . . . . . . . 153AL60.. . . . . . . . . . . . . . . . . . . 155W31. . . . . . . . . . . . . . . . . . . . . . 157W35........................159WH35.. . . . . . . . . . . . . . . . . . . 161ROUND.. . . . . . . . . . . . . . . 163
AC1. . . . . . . . . . . . . . . . . . . . . . . . 1 17AC2.. . . . . . . . . . . . . . . . . . . . . . 1 19AC3.. . . . . . . . . . . . . . . . . . . . . . 121AC4.. . . . . . . . . . . . . . . . . . . . . 123AC5.. . . . . . . . . . . . . . . . . . . . . 125AA.. . . . . . . . . . . . . . . . . . . . . . . 127AR1. . . . . . . . . . . . . . . . . . . . . . . 129AR2.. . . . . . . . . . . . . . . . . . . . . . 131
AR3.. . . . . . . . . . . . . . . . . . . . . 133AR4.. . . . . . . . . . . . . . . . . . . . . 135AS1. . . . . . . . . . . . . . . . . . . . . . . 137AS2. . . . . . . . . . . . . . . . . . . . . . 139AS3.. . . . . . . . . . . . . . . . . . . . . . 141AS4.. . . . . . . . . . . . . . . . . . . . . 143AT1. . . . . . . . . . . . . . . . . . . . . . . 145AT2. . . . . . . . . . . . . . . . . . . . . . 147
HD24..... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211Moving Head Lyte...................................................................................................21554 LED Par Lyte......................................................................................................219
Low Node................................................................................................................225High Node...............................................................................................................229
P RO D U C T OVERV I EW
R I B B O N LY T E F I X T U R E S
LO W P O W E R F I X T U R E S
E N T E RTA I N M E N T F I X T U R E S
A D D R E S S A B L E N O D E S
ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
S I D E - I L L U M I N AT I N G R I B B O N LY T E2.9............................................................................................................................61
Variable White 3.0...................................................................................................47Variable White Amber..............................................................................................51Variable White Red..................................................................................................55
RibbonLyte 1.5..........................................................................................................17RibbonLyte 2.2.........................................................................................................21RibbonLyte 3.0........................................................................................................25RibbonLyte 4.4........................................................................................................29RibbonLyte 5.0........................................................................................................33RibbonLyte 6.0........................................................................................................37RibbonLyte 8.8.........................................................................................................41
....................................................................................67 ....................................................................................71 ...................................................................................75 ...................................................................................79 ...................................................................................83 ...................................................................................87
RGB 2.2.....................................................................................................................93RGB 4.4.....................................................................................................................97RGBW.....................................................................................................................101RGBA......................................................................................................................105Addressable RGB...................................................................................................109
P R O D U C T O V E R V I E W
S TAT I C W H I T E R I B B O N LY T E
VA R I A B L E W H I T E R I B B O N LY T E
S TAT I C C O LO R S R I B B O N LY T E
RG B R I B B O N LY T E
Static Colors RibbonLyte 1.5Static Colors RibbonLyte 2.2Static Colors RibbonLyte 3.0Static Colors RibbonLyte 4.4Static Colors RibbonLyte 6.0Static Colors RibbonLyte 8.8
-
ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
P R O D U C T O V E R V I E W
PA RT S A N D AC C E S S O R I E SAll Parts and Accessories..................................................................................294
0-10 V Dimming......................................................................................................260Triac Dimming...........................................................................................................266DMX............................................................................................................................272IR Sensors.....................................................................................................................282Wireless.....................................................................................................................286
12 Volt..........................................................................................................................23724 Volt..........................................................................................................................243277 Volt AC Input...................................................................................................249
DR I V ER S
CONTROLLERS
-
2 3
O U R G R O W T H
. . . W E C O N T I N U E TO I N NOVAT E
In 2005, Acolytes architectural lighting line was formed and has been the companys focus ever since.
The StripLyte began this evolution and has continued with RibbonLyte, the High Output Lyte Bar and
many more cutting edge LED lighting choices.
One of Acolytes primary tenets is to never stop innovating. As evidence, in 2011 Acolyte debuted
Variable White RibbonLyte. This flexible LED lighting simulates a wide range of white lighting from
sunrise to sunset. Designers have been ecstatic over this product, never needing to specify a color
temperature again. TM
Acolyte again transformed the lighting scene when it introduced Incandescent LED in 2012. At 2400
Kelvin, Incandescent LED reproduces the amber hues and warmth of incandescent light.
Our design, manufacturing, and distribution spans the globe. Headquartered out of New York City,
with a factory and office in China and distribution channels in India, Acolyte is showing the world
the power of LED lighting technology. Numerous patents in the fields of LED lighting, heat sinking
technology and controls demonstrate our commitment to innovating and advancing this technology
to a better place.
With lighting agencies around the globe to represent us, and national and regional sales managers
overseeing them, we can deliver our technology wherever it is needed. Acolytes products are found
in prominent and landmark locations throughout the country and throughout the world.
Our continued focus is to deliver world class products and superior customer service to an expanding
global market, with the same level of attention to our customers as weve given since day one.
O U R RO OT S A N D O U R G ROW T HACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
O U R R O O T S
Acolytes founder, JR Guerrieri, has known for years that white
LEDs are the way of the future. Since its inception in 1992,
Acolytes focus has been on advancing the capabilities of LED
lighting technology and introducing LEDs to the world.
Acolyte began transforming the fashion, event, floral and
hospitality markets when it pioneered battery operated LED
lighting. Products like the votive light, the worlds first battery
operated flameless candle and the HD24, a wireless-controlled
RGB entertainment wash fixture, provided a cooler, more
efficient way to light the world.
W E B E G A N W I T H A V I S I O N . . .
Complete Integrated LED Lighting Solutions.TM
-
5M A N U F A C T U R I N G Q U A L I T Y
To produce white light LEDs, we start by carefully selecting the highest quality blue dies. We choose
440 nm, royal blue dies with a very tight range of +/- 5 nm. These are the dies that weve found work
best to generate the range of white light we strive to produce.
Phosphor is the luminescent substance that coats the surface of the LED. The phosphor on our LEDs
emits light at a higher wavelength than the blue LEDs themselves, giving the LEDs a full spectrum of
light. Acolyte has formulated proprietary batches of phosphor for each of our color temperatures.
By manufacturing our LED this way, Acolyte can ensure its customers the most accurate color
temperature, CRI and hue, consistently, time after time.
Acolyte tracks every customers purchase by their PO# and can trace their LEDs to the exact
phosphor mix and the exact blue die used for their order and the exact assembly date and time.
Quality assurance that is precise, and accurate, in every stage of manufacturing.
T H E M O S T C R I T I C A L C O M P O N E N T O F L E D L I G H T I N G P RO D U C T S I S T H E L E D I T S E L F.
TO E N S U R E AC C U R AC Y I N C O LO R T E M P E R AT U R E , W E F O R M U L AT E P RO P R I E TA RY B ATC H E S O F P H O S P H O R F O R E AC H O F O U R C O LO R T E M P E R AT U R E S
H AV E YO U P U RC H A S E D R I B B O N LY T E F RO M U S I N T H E PA S T B U T WA N T TO A D D M O R E A N D N E E D I T TO M ATC H ?
Q U A L I T Y I N D E S I G N A N D M A N U FAC T U R I N G4
LED lighting demands a level of quality control above
and beyond what the lighting industry has traditionally
required. Adherence to this quality control is one of
the most important parts of our operation. Use of
LEDs requires greater knowledge and sophistication
than in designing a traditional lighting fixture and
because of this, we carefully oversee each step of the
design, manufacturing, and testing processes.
We start at the source of the light, the die, then build
a properly designed thermal package, properly controlled
and driven, in a sleek, yet functional, design. To meet the
expectations we have for our products, for them to operate
precisely and accurately, we have instituted numerous quality
control measures to ensure our products success.
L E D L I G H T I N G A L LOW S F O R C O N T RO L O F C O LO R , C O LO R T E M P E R AT U R E , C R I A N D
L I G H T I N G I N T E N S I T Y T H AT D I D N OT P R E V I O U S LY E X I S T. W I T H A L L O F T H I S
C O N T RO L , H OW E V E R , A H I G H L E V E L O F I N M A N U FAC T U R I N G I S PA R A M O U N T.
P R E C I S I O N A N D A C C U R A C Y I N D E S I G N
ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
-
6 7
R E L I A B L E P E O P L E , R E L I A B L E P R O D U C T
Pictured: Roberts Steakhouse, Atlantic City, NJ
R E L I A B L E P E O P L E R E L I A B L E P RO D U C T
R E L I A B L E P E O P L E , R E L I A B L E P R O D U C T
One of our strengths at Acolyte is our unwavering commitment to our customers. As companies
grow they often forget about the people that helped them get there. This will never happen with
Acolyte. Whether our staff is 3, 30, or 3000 your voice will always be heard. We will not be, and not
become, one of those faceless companies that you spend hours trying to get in touch with.
If you have any problems do not hesitate to call or email.
Phone : 212 629 6830
Email : [email protected]
Acolytes commitment to superior lighting systems comes from a knowledge base weve gained
through 20 years of developing LED technology, drivers and controls. Our roots in entertainment and
theatrical lighting gave us the experience in complex control systems that has allowed us to provide
the very best solutions to our customers as weve made the transition to architectural lighting. At
Acolyte we demand the highest performance from everything we sell. Design, engineering, and
manufacturing are critical to this performance and reliability.
Our lighting is often paired with an entire system of controllers, interfaces, switches, and more, so we
actively test compatibility with 3rd party manufacturers products to ensure seamless integration and
control of our lighting solutions. We strive to provide you, our customers, with steadfast reliability
beginning with the ordering process through the years and years you will enjoy the lighting system
weve provided. Our veteran staff of engineers and technical support personnel ensure that the
lighting package you buy continues to operate with longevity and reliability.
ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
-
8 9
Salvatore Guerrieri (JR), the founder of the company, has always had a passion for technology
and electronics and an entrepreneurial spirit. In college, he stumbled upon a long-held family ravioli
recipe and started his first venture, Bratchs Ravioli. In 1988 he was awarded the Small Business
Administrations Entrepreneur of the Year Award for the state of New Jersey.
After selling Bratchs in 1993, JR followed his passion for music, gaining admission to the prestigious
Juilliard Conservatory of Music. Enrolling at Juilliard and moving to NYC, he also worked as a music
engineer in many of the blues, jazz and rock clubs. Through his involvement in the engineering and
recording side of the industry he had the good fortune of discovering the up and coming technology
that was the LED, light emitting diode.
JR began experimenting with melding LEDs with electronics in the interest of creating a low-power,
bright LED lighting system. By programming code onto an inexpensive microchip, he was able to
create the first battery-operated smart LED device. He named it the SmartLyte and it was used to
illuminate the interior of handbags. He filed a patent on the technology and continued to innovate.
He developed products for the fashion, special events, floral and hospitality industries and even
introduced the first ever flameless, battery-operated LED votive candle.
By 1995 he looked to take the technology further and the architectural lighting division Acolyte LED
was formed. He has continued to innovate, filing numerous patents related to LEDs, heat-sinking
technology and LED control systems.
JR is leading Acolyte through tremendous growth and product development having established a
manufacturing presence in China with rigid quality-control standards and having installed an ever
growing network of representatives across the United States to distribute our exciting products.
With his guidance, Acolyte has become the go-to LED lighting solution for the nations premier
architectural projects.
W H O W E A R E
JR Guerrieri - Founder and CEO
....
W H O W E A R E
W H O W E A R E
ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
-
W H O W E A R EW H O W E A R E
ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected] 0 1 1
Alex Nicolaides was born into the home of a New York City architect,
which encouraged a fascination with design and engineering at an early
age. Following his passion for design, he attended Wentworth Institute
of Technology in Boston, where he studied Industrial Design. The school
offered him a unique internship program giving him real world experience
while attending classes. He spent four months at Material Connexion - a
unique materials library in NYC used by world-renowned designers and
architects such as Philippe Stark and Frank Gehry. He also spent four
months interning at ILEX, a lighting fixture design company in East Taunton,
MA.
After graduation, Alex worked for lighting designer Robert Sonneman at
Sonneman Way of Light. During this time Alex not only worked on Roberts
designs, but was able to bring several of his own lighting designs to market.
He began freelancing for Acolyte during this time and after eight months
joined us full time.
Acolytes transformation into the world of architectural lighting was just
beginning and the company was small and because of this, Alexs time was
needed in all departments. He has progressed from a jack of all trades
position to the Director of Design and Product Development and is now
the Vice President of Operations and Design. His oversight includes
quotations, customer service, production, sales, web and graphic design
and product development.
Alex Nicolaides - Vice President of Operations and Design
....
W H O W E A R E
With over 30 years experience in sales with various manufacturers, Johnnie
has held positions ranging from factory training representative, Regional
sales manager, national sales manager to Vice President of Sales. He
has a successful track record of establishing a sales base for numerous
organizations and has personally handled national accounts in the retail,
hospitality, defense and government fields.
Johnnie can usually be found interacting with lighting representatives:
working hard to establish new accounts, strengthen existing ones and
spread the word about our excellent products.
Johnnie Pechal - National Sales Manager
....
-
ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected] 2 1 3
L E D F A C T S H E E T
W H AT S H O U L D I B E A SK ING ?
What is the foot-candle rating? Why is it usually more important than a fixtures lumen output?
Foot-candles are a measure of how much light is projected on a given surface area from a certain distance. Because LED light is directional, foot-candles can tell you how much light there will be in the location you want it to be.
Suppose youre looking at an incandescent fixture with a very high lumen output, which is the total amount of light emitted. Its lumen output may be higher than an LED fixture to which youre comparing it, but because LED light is directional, the LED fixture may project more light where you actually need it. This is what foot-candle measurements will tell you.
We are presently testing all of our LED lighting to get accurate illuminance data and will be constantly updating this information on our website as this information is gathered.
How important is CRI?
Many of our customers ask us about the CRI of our LED lighting because they want to make sure they faithfully represent the colors of the objects they are illuminating. However, the CRI was introduced at a time when a second generation of fluorescent lamps were being brought onto the market and is not as applicable to newer light sources.
The National Institute for Standards and Technology has criticized CRI for not correlating well in practice with color rendering quality, with respect to LED lighting. Numerous other sources have stated that CRI is not a good indicator for use in visual assessment, especially for sources with a CCT below 5000 Kelvin.2
While we list the CRI rating for many of our products, it is important to note the variability and unpredictability with this standard with respect to LED lighting.
1. U.S. Department of Energy. Energy Efficiency and Renewable Energy. EERE Information Center. October 2010. Web. 14 June 2013.
2. Guo, Xin; Houser, Kevin W. ,A review of colour rendering indices and their application to commercial light sources, Lighting Research and Technology 36. 2004. Web. 14 June 2013
CIE, Method of Measuring and Specifying Colour Rendering Properties of Light Sources, Vienna: Commission Internationale de lEclairage, ISBN 978-3-900734-57-2. 1995. Web. 14 June 2013
L E D FAC T S H E E T
L E D F A C T S H E E T
G E T AC Q U A I N T E D W I T H T H E S E S TAT S
L E D BENE F I T S
Lumens: measures light output. The higher the number, the more light is emitted.
Lumens per watt (lm/W): measures efficiency. The higher the number, the more efficient the product.
Watts: measures the energy required to light the product. The lower the wattage, the less energy is used.
Correlated Color Temperature (CCT): measures white light color. Cool colors have higher Kelvin temperatures (3600-5500 K); warm colors have lower color temperatures (2700-3000 K). Cool white light is usually better for visual tasks. Warm white light is usually better for living spaces because it casts a warmer light on skin and clothing. Color temperatures of 2700 to 3500 K are recommended for most general indoor and task lighting.
Color Rendering Index (CRI): measures the effect of the lamps light spectrum on the color appearance of objects. The higher the number, the truer the appearance of light on objects. Incandescent lighting is 100 on the CRI.
Directional light emission: Light is directed where it is needed. Unlike incandescent and fluorescent lighting, it does not emit light and heat in all directions, which is wasteful.
No warm-up time: LEDs require no warm-up time unlike fluorescent lighting.
Minimum heat: LEDs emit 75% less heat than incandescent lighting.1
-
ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected] 4 1 5
The backbone of Acolytes business, Ribbonlyte creates opportunities for lighting that were previously impossible.
Our RibbonLyte comes in a myriad of color temperatures and light outputs to meet just about any applications needs.
With full control of our production at our dedicated facility along with the testing that we perform on every strand of RibbonLyte we manufacture, we can provide the tightest binning
tolerances, the greatest reliability and the most custom options you will find in the flexible lighting marketplace.
The following pages are a representation of this commitment to quality.
R I B B O N LY T E
Pictured: RibbonLyte 4.4 2400K @ Roberts Steakhouse, Atlantic City, NJ Photograph: Katie Thurber
-
1 7R I B B O N LY T E S TAT I C W H I T E
Dry or wet location flexible LEDs
12 or 24 Volt
1.5 Watts per foot, 18 LEDs per foot
IP65 and IP68 versions are UV resistant
2400K, 2700K, 3000K, 3500K, 4100K, and 6000K
Cuttable every 1.97 inches (12V) or 3.94 inches (24V)
R I B B O N LY T E 1 . 5
+12V
-
+12V
-
680
1.97 Inches / 50 mm
1.5 - 12 Volt
3.94 Inches / 100 mm
0.31 Inches / 8 mmWidth:
Length between cuttable points:
Length between cuttable points:
Width:
0.65 Inches / 16.5 mmLED on center:
LED on center:
+24V
-
+24V
-
680
6800.31 Inches / 8 mm
0.088 Inches / 2.2 mmHeight:
0.088 Inches / 2.2 mmHeight:
0.65 Inches / 16.5 mm
1.5 - 24 Volt
D IMENS IONS
PA RT N U M B E R B U I L D E R
2400 K 2700 K 3500 K 4100 K 6000K3000 K
3 4 5 6 7
RB
65 - IP6568 - IP68
Blank - None (IP40)
12 - 12V24 - 24V
1.5
24 - 2400K27 - 2700K30 - 3000K35 - 3500K41 - 4100K
60 - 6000K
+ + + + = Your Part NumberExample: RB121.527
Category Waterproof Voltage Wattage Color Temperature
White
ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
S TAT I C W H I T E R I B B O N LY T E
White lighting is the way we see the world. With so many variations of colortemperature and wattage, our Static White RibbonLyte will help you createthe ultimate lighting scheme.
Whether you want to imitate the warm glow of candelight, or provide a highvisibility work environment similar to a bright afternoon outdoors, we canprovide a solution to fill your needs.
Not only do we offer a variety of color temperatures, but our RibbonLyte comesin a number of wattages as well. As energy costs rise, the benefits of our lower wattage LEDs are even more apparent.
1 6
Pictured: RibbonLyte 4.4 3000K @Fetta Panini Bar, Toronto Pearson Intl Airport, Mississagua, ON
RoHSCompliant
-
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V-
+12V-
151
151
151
+12V
-
151
+12V
-
+12V
-
151
151
+12V-
151
+12V-
151
+12V
-
151
151
+12V-
151
+12V
-
151
151
S A M P L E B E A M A N G L E S
C O N N E C T I O N OPT IONS
C H A N N E L COMPAT I B I L I TY
160
Ribbonlyte
Protection Compatible Channels
Non-Waterproof (IP40)
IP65
IP68
All Channel
All Channel
All Channel
In AS1Channel
130 60 60 30
In AS4Channel
In AL60Channel
In AT3Channel
In AC1Channel
150
2.1 mm ConnectorsSide FeedBack FeedThrough Back
of Channel
IP68 ConnectorsSolder PointJumper CableEnd Feed for Hard WiredConnection
( S e e p a g e 2 9 4 f o r s p e c i f i c c o n n e c t o r i n f o r m a t i o n )
( S e e p a g e 1 1 4 f o r m o r e c h a n n e l i n f o r m a t i o n )
1 9ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
D I M E N S I O N S R I B BONLYTE
O U T D O O R - I P 6 8
Width
Length
Height
Width
Length
Height
S P E C I F I C AT I O N S R I B BONLYTE
R I B B O N LY T E 1 . 5
1 . 5
1 . 5
1 8
R I B B O N LY T E 1 . 5
R I B B O N LY T E S TAT I C W H I T E
I P 4 0 + I P 6 5
0.41 / 10.4 mm
Up to 29 4.6 (12V) in ~2 inch sections or 68 7.5 (24V) in ~4 inch sections
0.18 / 4.5 mm
Operating Voltage
Power Consumption
Amperage
Protection Rating
Dimming
Operating Temperature
Color Temperature
Lumen Output
Binning Tolerance
LED Beam Angle
Lamp Life
Cuttable
CRI*
*CRI >90 available upon request
Lumens per Watt (per ft)
Constant Voltage
Max Length Before Additional
Power is Needed
12 Volt / 24 Volt
1.5 Watts / Linear Foot
12v: 125 mA / Foot 24v: 63 mA / Foot
IP40/IP65/IP68
Triac / 0-10 Volt / DMX / Lutron A-Series 1% dimming LED drivers
-40 C to 70 C
2400K 2700K 3000K 3500K 4100K 6000K
2400K: 92.86 lm/ft; 2700K: 80.46 lm/ft; 3000K: 82.8 lm/ft;
3500K: 96.84 lm/ft; 4100K: 85.68 lm/ft; 6000K: 89.64 lm/ft
+/- 100K
160
50,000 Hours
12v: Every 1.97 (50 mm) 24v: Every 3.94 (100 mm)
2400K: >50.4; 2700K: >56; 3000K: >62.8;
3500K: >66.3; 4100K: >69.2; 6000K: >73.8
2400K: 61.91 lm/W; 2700K: 53.64 lm/W; 3000K: 55.2 lm/W;
3500K: 64.56 lm/W; 4100K: 57.12 lm/W; 6000K: 59.76 lm/W
Yes
12V: 29 4.6 (9 Meters) 24V: 68 7.5 (21 Meters)
0.31 / 8 mm
Up to 29 4.6 (12V) in ~2 inch sections or 68 7.5 (24V) in ~4 inch sections
IP40: 0.088 / 2.2 mm IP65: 0.125 / 3.2 mm
-
D IMENS IONS
PA RT N U M B E R B U I L D E R
2400 K 2700 K 3500 K 4100 K 6000K3000 K
3 4 5 6 7
2 1ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected] 0 R I B B O N LY T E S TAT I C W H I T E
Dry or wet location flexible LEDs
12 or 24 Volt
2.2 Watts per foot, 9 LEDs per foot
IP65 and IP68 versions are UV resistant
2400K, 2700K, 3000K, 3500K, 4100K, and 6000K
Cuttable every 3.94 inches (12V) or 6.55 inches (24V)
R I B B O N LY T E 2 . 2
+12V
-
+24V
-
+12V
-
+24V
-
151
151
151
151
151
151
3.94 Inches / 100 mm
2.2 - 12 Volt
6.55 Inches / 166.4 mm
0.39 Inches / 10 mm
0.39 Inches / 10 mm
0.09 Inches / 2.3 mm
1.3 Inches / 33 mm
2.2 - 24 Volt
Width:
Width:
LED on center:
LED on center:
Height:
0.09 Inches / 2.3 mmHeight:
Length between cuttable points:
Length between cuttable points:
RB
65 - IP6568 - IP68
Blank - None (IP40)
12 - 12V24 - 24V
2.2
24 - 2400K27 - 2700K30 - 3000K35 - 3500K41 - 4100K
60 - 6000K
+ + + + = Your Part NumberExample: RB122.227
Category Waterproof Voltage Wattage Color Temperature
White
U S AG E GU IDE L INE S
R I B B O N LY T E 1 . 5
RoHSCompliant
CHANNELPage 114
DR I V ER SPage 234
CONTROL L ER SPage 258
PA RT S A N D AC C E S S O R I E SPage 294
Compatible with a wide variety of control products including the entire line of Lutron dimming systems.
For use with Acolyte drivers, triac dimming modules, 0-10 modules and interface controllers (DMXINF models).
Use with non-Acolyte triac, MLV or ELV drivers is not supported or warrantied.
Due to the nature of the product, RibbonLyte cuttable lengths are generally longer or shorter than the customer requested length. Unless specified, RibbonLyte is factory cut at the shorter cuttable point.
IP65 and IP68 versions can be used in wet, outdoor locations around swimming pools and spa tubs, but not submerged in swimming pools and spa tubs.
We reserve the right to make changes to product lineup, specifications, design and finishes at any time without notice.
AC C E S S O R I E S R I B B O N LY T E 1 . 5
-
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V-
+12V-
151
151
151
+12V
-
151
+12V
-
+12V
-
151
151
+12V-
151
+12V-
151
+12V
-
151
151
+12V-
151
+12V
-
151
151
S A M P L E B E A M A N G L E S
C O N N E C T I O N OPT IONS
C H A N N E L COMPAT I B I L I TY
160
Ribbonlyte
Protection Compatible Channels
Non-Waterproof (IP40)
IP65
IP68
In AS1Channel
130 60 60 30
In AS4Channel
In AL60Channel
In AT3Channel
In AC1Channel
150
2.1 mm ConnectorsSide FeedBack FeedThrough Back
of Channel
IP68 ConnectorsSolder PointJumper CableEnd Feed for Hard WiredConnection
( S e e p a g e 2 9 4 f o r s p e c i f i c c o n n e c t o r i n f o r m a t i o n )
( S e e p a g e 1 1 4 f o r m o r e c h a n n e l i n f o r m a t i o n )
2 3ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
D I M E N S I O N S R I B BONLYTE
O U T D O O R - I P 6 8
Width
Length
Height
S P E C I F I C AT I O N S R I B BONLYTE
2 2
All Channel
All Channel
AC1, AC2, AC4, AC5, AR3, AS3, AT1, AT2, AT3, AP1, W31, W35, WH35
R I B B O N LY T E S TAT I C W H I T E
R I B B O N LY T E 2 . 2
I P 4 0 + I P 6 5
Operating Voltage
Power Consumption
Amperage
Protection Rating
Dimming
Operating Temperature
Color Temperature
Lumen Output
Binning Tolerance
LED Beam Angle
Lamp Life
Cuttable
CRI*
*CRI >90 available upon request
Lumens per Watt (per ft)
Constant Voltage
Max Length Before Additional
Power is Needed
0.52 / 13.3 mm
Up to 26 3 (12V) in ~4 inch sections or 45 10.3 (24V) in ~6.5 inch sections
0.19 / 4.8 mm
2 . 2
Width
Length
Height
0.39 / 10 mm
Up to 26 3 (12V) in ~4 inch sections or 45 10.3 (24V) in ~6.5 inch sections
IP40: 0.09 / 2.3 mm IP65: 0.172 / 4.4 mm
12 Volt / 24 Volt
2.2 Watts / Linear Foot
12v: 183 mA / Foot 24v: 92 mA / Foot
IP40/IP65/IP68
Triac / 0-10 Volt / DMX / Lutron A-Series 1% dimming LED drivers
-40 C to 70 C
2400K 2700K 3000K 3500K 4100K 6000K
2400K: 149.13 lm/ft; 2700K: 153.99 lm/ft; 3000K: 175.68 lm/ft;
3500K: 161.1 lm/ft; 4100K: 157.23 lm/ft; 6000K: 169.38 lm/ft
+/- 100K
160
50,000 Hours
12v: Every 3.94 (100 mm) 24v: Every 6.55 (166.4 mm)
2400K: >50.5; 2700K: >58.9; 3000K: >63;
3500K: >65.3; 4100K: >70.8; 6000K: >73.4
2400K: 67.79 lm/W; 2700K: 70.00 lm/W; 3000K: 79.85 lm/W;
3500K: 73.23 lm/W; 4100K: 71.47 lm/W; 6000K: 77.00 lm/W
Yes
12V: 26 3 (8 Meters) 24V: 45 10.3 (14 Meters)
2 . 2
R I B B O N LY T E 2 . 2
-
D IMENS IONS
PA RT N U M B E R B U I L D E R
2400 K 2700 K 3500 K 4100 K 6000K3000 K
3 4 5 6 7
2 5ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected] 4 R I B B O N LY T E S TAT I C W H I T E
Dry or wet location flexible LEDs
12 or 24 Volt
3.0 Watts per foot, 36 LEDs per foot
IP65 and IP68 versions are UV resistant
2400K, 2700K, 3000K, 3500K, 4100K, and 6000K
Cuttable every 0.98 inches (12V) or 1.97 inches (24V)
R I B B O N LY T E 3 . 0
RB
65 - IP6568 - IP68
Blank - None (IP40)
12 - 12V24 - 24V
3.0
24 - 2400K27 - 2700K30 - 3000K35 - 3500K41 - 4100K
60 - 6000K
+ + + + = Your Part NumberExample: RB123.027
Category Waterproof Voltage Wattage Color Temperature
3.0 - 12 Volt
3.0 - 24 Volt
+
-
+
-
680
0.98 Inches / 25 mm
0.31 Inches / 8 mm
0.33 Inches / 8.4 mm
0.088 Inches / 2.2 mm
+
-
+
-680 680
1.97 Inches / 50 mm
Width:
0.31 Inches / 8 mmWidth:
Length between cuttable points:
Length between cuttable points:
LED on center:
0.33 Inches / 8.4 mmLED on center:
Height:
0.088 Inches / 2.2 mmHeight:
WhiteR I B B O N LY T E 2 . 2
U S AG E GU IDE L INE S
RoHSCompliant
CHANNELPage 114
DR I V ER SPage 234
CONTROL L ER SPage 258
PA RT S A N D AC C E S S O R I E SPage 294
Compatible with a wide variety of control products including the entire line of Lutron dimming systems.
For use with Acolyte drivers, triac dimming modules, 0-10 modules and interface controllers (DMXINF models).
Use with non-Acolyte triac, MLV or ELV drivers is not supported or warrantied.
Due to the nature of the product, RibbonLyte cuttable lengths are generally longer or shorter than the customer requested length. Unless specified, RibbonLyte is factory cut at the shorter cuttable point.
IP65 and IP68 versions can be used in wet, outdoor locations around swimming pools and spa tubs, but not submerged in swimming pools and spa tubs.
We reserve the right to make changes to product lineup, specifications, design and finishes at any time without notice.
AC C E S S O R I E S R I B B O N LY T E 2 . 2
-
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V-
+12V-
151
151
151
+12V
-
151
+12V
-
+12V
-
151
151
+12V-
151
+12V-
151
+12V
-
151
151
+12V-
151
+12V
-
151
151
S A M P L E B E A M A N G L E S
C O N N E C T I O N OPT IONS
C H A N N E L COMPAT I B I L I TY
160
Ribbonlyte
Protection Compatible Channels
Non-Waterproof (IP40)
IP65
IP68
All Channel
All Channel
All Channel
In AS1Channel
130 60 60 30
In AS4Channel
In AL60Channel
In AT3Channel
In AC1Channel
150
2.1 mm ConnectorsSide FeedBack FeedThrough Back
of Channel
IP68 ConnectorsSolder PointJumper CableEnd Feed for Hard WiredConnection
( S e e p a g e 2 9 4 f o r s p e c i f i c c o n n e c t o r i n f o r m a t i o n )
( S e e p a g e 1 1 4 f o r m o r e c h a n n e l i n f o r m a t i o n )
2 7
D I M E N S I O N S R I B BONLYTE
O U T D O O R - I P 6 8
Width
Length
Height
S P E C I F I C AT I O N S R I B BONLYTE
2 6 R I B B O N LY T E S TAT I C W H I T E
R I B B O N LY T E 3 . 0
I P 4 0 + I P 6 5
Operating Voltage
Power Consumption
Amperage
Protection Rating
Dimming
Operating Temperature
Color Temperature
Lumen Output
Binning Tolerance
LED Beam Angle
Lamp Life
Cuttable
CRI*
*CRI >90 available upon request
Lumens per Watt (per ft)
Constant Voltage
Max Length Before Additional
Power is Needed
Width
Length
Height
0.41 / 10.4 mm
Up to 19 8.2 (12V) in ~1 inch sections or 32 9.7 (24V) in ~2 inch sections
0.18 / 4.5 mm
0.31 / 8 mm
Up to 19 8.2 (12V) in ~1 inch sections or 32 9.7 (24V) in ~2 inch sections
IP40: 0.088 / 2.2 mm IP65: 0.125 / 3.2 mm
12 Volt / 24 Volt
3.0 Watts / Linear Foot
12v: 250 mA / Foot 24v: 125 mA / Foot
IP40/IP65/IP68
Triac / 0-10 Volt / DMX / Lutron A-Series 1% dimming LED drivers
-40 C to 70 C
2400K 2700K 3000K 3500K 4100K 6000K
2400K: 185.73 lm/ft; 2700K: 160.92 lm/ft; 3000K: 165.6 lm/ft;
3500K: 193.68 lm/ft; 4100K: 171.36 lm/ft; 6000K: 179.28 lm/ft
+/- 100K
160
50,000 Hours
12v: Every 0.98 (25 mm) 24v: Every 1.97 (50 mm)
2400K: >50.4; 2700K: >56; 3000K: >62.8;
3500K: >66.3; 4100K: >69.2; 6000K: >73.8
2400K: 61.91 lm/W; 2700K: 53.64 lm/W; 3000K: 55.2 lm/W;
3500K: 64.56 lm/W; 4100K: 57.12 lm/W; 6000K: 59.76 lm/W
Yes
12V: 19 8.2 (6 Meters) 24V: 32 9.7 (10 Meters)
3 . 0
ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
R I B B O N LY T E 3 . 0
3 . 0
-
2 9ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected] 8
D IMENS IONS
2400 K 2700 K 3500 K 4100 K 6000K3000 K
3 4 5 6 7
PA RT N U M B E R B U I L D E R
R I B B O N LY T E S TAT I C W H I T E
151
151
151
151
151
151
151
151
151
1.97 Inches / 50 mm
4.4 - 12 Volt
3.94 Inches / 100 mm
0.39 Inches / 10 mm
0.39 Inches / 10 mm
0.66 Inches / 16.67 mm
0.66 Inches / 16.67 mm
0.09 Inches / 2.3 mm
4.4 - 24 Volt
+
-
+
-
-
+
-
+
0.09 Inches / 2.3 mm
Width:
LED on center:
Height:
Width:
LED on center:
Height:
Length between cuttable points:
Length between cuttable points:
Dry or wet location flexible LEDs
12 or 24 Volt
4.4 Watts per foot, 18 LEDs per foot
IP65 and IP68 versions are UV resistant
2400K, 2700K, 3000K, 3500K, 4100K, and 6000K
Cuttable every 1.97 inches (12V) or 3.94 inches (24V)
R I B B O N LY T E 4 . 4
RB
65 - IP6568 - IP68
Blank - None (IP40)
12 - 12V24 - 24V
4.4
24 - 2400K27 - 2700K30 - 3000K35 - 3500K41 - 4100K
60 - 6000K
+ + + + = Your Part NumberExample: RB124.427
Category Waterproof Voltage Wattage Color Temperature
WhiteR I B B O N LY T E 3 . 0
U S AG E GU IDE L INE S
RoHSCompliant
CHANNELPage 114
DR I V ER SPage 234
CONTROL L ER SPage 258
PA RT S A N D AC C E S S O R I E SPage 294
Compatible with a wide variety of control products including the entire line of Lutron dimming systems.
For use with Acolyte drivers, triac dimming modules, 0-10 modules and interface controllers (DMXINF models).
Use with non-Acolyte triac, MLV or ELV drivers is not supported or warrantied.
Due to the nature of the product, RibbonLyte cuttable lengths are generally longer or shorter than the customer requested length. Unless specified, RibbonLyte is factory cut at the shorter cuttable point.
IP65 and IP68 versions can be used in wet, outdoor locations around swimming pools and spa tubs, but not submerged in swimming pools and spa tubs.
We reserve the right to make changes to product lineup, specifications, design and finishes at any time without notice.
AC C E S S O R I E S R I B B O N LY T E 3 . 0
-
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V-
+12V-
151
151
151
+12V
-
151
+12V
-
+12V
-
151
151
+12V-
151
+12V-
151
+12V
-
151
151
+12V-
151
+12V
-
151
151
S A M P L E B E A M A N G L E S
C O N N E C T I O N OPT IONS
C H A N N E L COMPAT I B I L I TY
160
Ribbonlyte
Protection Compatible Channels
Non-Waterproof (IP40)
IP65
IP68
In AS1Channel
130 60 60 30
In AS4Channel
In AL60Channel
In AT3Channel
In AC1Channel
150
2.1 mm ConnectorsSide FeedBack FeedThrough Back
of Channel
IP68 ConnectorsSolder PointJumper CableEnd Feed for Hard WiredConnection
R I B B O N LY T E 4 . 4
( S e e p a g e 2 9 4 f o r s p e c i f i c c o n n e c t o r i n f o r m a t i o n )
( S e e p a g e 1 1 4 f o r m o r e c h a n n e l i n f o r m a t i o n )
3 13 0
All Channel
All Channel
AC1, AC2, AC4, AC5, AR3, AS3, AT1, AT2, AT3, AP1, W31, W35, WH35
R I B B O N LY T E S TAT I C W H I T EACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
D I M E N S I O N S R I B BONLYTE
O U T D O O R - I P 6 8
I P 4 0 + I P 6 5
Width
Length
Height
S P E C I F I C AT I O N S R I B BONLYTE
Operating Voltage
Power Consumption
Milliamperes
Protection Rating
Dimming
Operating Temperature
Color Temperature
Lumen Output
Binning Tolerance
LED Beam Angle
Lamp Life
Cuttable
CRI*
*CRI >90 available upon request
Lumens per Watt (per ft)
Constant Voltage
Max Length Before Additional
Power is Needed
0.39 / 10 mm
Up to 16 4.9 (12V) in ~2 inch sections or 26 3 (24V) in ~4 inch sections
IP40: 0.09 / 2.3 mm IP65: 0.172 / 4.4 mm
4 . 4
Width
Length
Height
0.52 / 13.3 mm
Up to 16 4.9 (12V) in ~2 inch sections or 26 3 (24V) in ~4 inch sections
0.19 / 4.8 mm
12 Volt / 24 Volt
4.4 Watts / Linear Foot
12v: 366 mA / Foot 24v: 183 mA / Foot
IP40/IP65/IP68
Triac / 0-10 Volt / DMX / Lutron A-Series 1% dimming LED drivers
-40 C to 70 C
2400K 2700K 3000K 3500K 4100K 6000K
2400K: 298.26 lm/ft; 2700K: 307.98 lm/ft; 3000K: 351.36 lm/ft;
3500K: 322.2 lm/ft; 4100K: 314.46 lm/ft; 6000K: 338.76 lm/ft
+/- 100K
160
50,000 Hours
12v: Every 1.97 (50 mm) 24v: Every 3.94 (100 mm)
2400K: >50.5; 2700K: >58.9; 3000K: >63;
3500K: >65.3; 4100K: >70.8; 6000K: >73.4
2400K: 67.79 lm/W; 2700K: 70.00 lm/W; 3000K: 79.85 lm/W;
3500K: 73.23 lm/W; 4100K: 71.47 lm/W; 6000K: 77.00 lm/W
Yes
12V: 16 4.9 (5 Meters) 24V: 26 3 (8 Meters)
4 . 4
R I B B O N LY T E 4 . 4
-
ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected] 2 3 3
D IMENS IONS
2400 K 2700 K 3500 K 4100 K 6000K3000 K
3 4 5 6 7
PA RT N U M B E R B U I L D E R
R I B B O N LY T E S TAT I C W H I T E
150 150
5.0 - 12 Volt
2.46 Inches / 62.5 mm
4.92 Inches / 125 mm
0.41 Inches / 10.41 mm
0.41 Inches / 10.41 mm
0.065 Inches / 1.65 mm
0.065 Inches / 1.65 mm
0.82 Inches / 20.70 mm
0.82 Inches / 20.70 mm
5.0 - 24 Volt
12V+ 12V+
- -
24V+
-
24V+
-
150 150 150 150
Width:
Width:
LED on center:
LED on center:
Height:
Height:
Length between cuttable points:
Length between cuttable points:
Dry or wet location flexible LEDs
12 or 24 Volt
5.0 Watts per foot, 15 LEDs per foot
IP65 and IP68 versions are UV resistant
3000K, 4100K, and 6000K
Cuttable every 2.46 inches (12V) or 4.92 inches (24V)
R I B B O N LY T E 5 . 0
RB
65 - IP6568 - IP68
Blank - None (IP40)
12 - 12V24 - 24V
5.0
30 - 3000K41 - 4100K
60 - 6000K
+ + + + = Your Part NumberExample: RB125.030
Category Waterproof Voltage Wattage Color Temperature
WhiteR I B B O N LY T E 4 . 4
U S AG E GU IDE L INE S
RoHSCompliant
CHANNELPage 114
DR I V ER SPage 234
CONTROL L ER SPage 258
PA RT S A N D AC C E S S O R I E SPage 294
Compatible with a wide variety of control products including the entire line of Lutron dimming systems.
For use with Acolyte drivers, triac dimming modules, 0-10 modules and interface controllers (DMXINF models).
Use with non-Acolyte triac, MLV or ELV drivers is not supported or warrantied.
Due to the nature of the product, RibbonLyte cuttable lengths are generally longer or shorter than the customer requested length. Unless specified, RibbonLyte is factory cut at the shorter cuttable point.
IP65 and IP68 versions can be used in wet, outdoor locations around swimming pools and spa tubs, but not submerged in swimming pools and spa tubs.
We reserve the right to make changes to product lineup, specifications, design and finishes at any time without notice.
AC C E S S O R I E S R I B B O N LY T E 4 . 4
-
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V-
+12V-
151
151
151
+12V
-
151
+12V
-
+12V
-
151
151
+12V-
151
+12V-
151
+12V
-
151
151
+12V-
151
+12V
-
151
151
S A M P L E B E A M A N G L E S
C O N N E C T I O N OPT IONS
C H A N N E L COMPAT I B I L I TY
160
Ribbonlyte
Protection Compatible Channels
Non-Waterproof (IP40)
IP65
IP68
In AS1Channel
130 60 60 30
In AS4Channel
In AL60Channel
In AT3Channel
In AC1Channel
150
2.1 mm ConnectorsSide FeedBack FeedThrough Back
of Channel
IP68 ConnectorsSolder PointJumper CableEnd Feed for Hard WiredConnection
( S e e p a g e 2 9 4 f o r s p e c i f i c c o n n e c t o r i n f o r m a t i o n )
( S e e p a g e 1 1 4 f o r m o r e c h a n n e l i n f o r m a t i o n )
3 53 4 R I B B O N LY T E S TAT I C W H I T E
All Channel
All Channel
AC1, AC2, AC4, AC5, AR3, AS3, AT1, AT2, AT3, AP1, W31, W35, WH35
R I B B O N LY T E 5 . 0
ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
D I M E N S I O N S R I B B O N LY T E 5 . 0
O U T D O O R - I P 6 8
I P 4 0 + I P 6 5
Width
Length
Height
S P E C I F I C AT I O N S R I B B O N LY T E 5 . 0
Operating Voltage
Power Consumption
Milliamperes
Protection Rating
Dimming
Operating Temperature
Color Temperature
Lumen Output
Binning Tolerance
LED Beam Angle
Lamp Life
Cuttable
CRI*
*CRI >90 available upon request
Lumens per Watt (per ft)
Constant Voltage
Max Length Before Additional
Power is Needed
0.41 / 10.41 mm
Up to 16 4.9 (12V) in ~2.5 inch sections or 32 9.7 (24V) in ~5 inch sections
IP40: 0.065 / 1.65 mm IP65: 0.125 / 3.2 mm
Width
Length
Height
0.54 / 13.3 mm
Up to 16 4.9 (12V) in ~2.5 inch sections or 32 9.7 (24V) in ~5 inch sections
0.19 / 4.8 mm
12 Volt / 24 Volt
5.0 Watts / Linear Foot
12v: 417 mA / Foot 24v: 208 mA / Foot
IP40/IP65/IP68
Triac / 0-10 Volt / DMX / Lutron A-Series 1% dimming LED drivers
-40 C to 70 C
3000K 4100K 6000K
3000K: 438.91 lm/ft; 4100K: 441.96 lm/ft; 6000K: 445.01 lm/ft
+/- 100K
160
50,000 Hours
12v: Every 2.46 (62.5 mm) 24v: Every 4.92 (125 mm)
3000K: >72; 4100K: >70; 6000K: >69
3000K: 87.78 lm/W; 4100K: 88.39 lm/W; 6000K: 89.00 lm/W
Yes
12V: 16 4.9 (5 Meters) 24V: 32 9.7 (10 Meters)
R I B B O N LY T E 5 . 0
-
D IMENS IONS
2400 K 2700 K 3500 K 4100 K 6000K3000 K
3 4 5 6 7
3 7ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected] 6
6.0 - 12 Volt
6.0 - 24 Volt
+
-
+
-
121
121
1.97 Inches / 50 mm
0.5 Inches / 12.7 mm
0.33 Inches / 8.4 mm
0.5 Inches / 12.7 mm
0.088 Inches / 2.2 mm
0.33 Inches / 8.4 mm
3.94 Inches / 100 mm
+
-
+
-
121
121
121
121
0.088 Inches / 2.2 mm
Width:
LED on center:
Height:
Width:
LED on center:
Height:
Length between cuttable points:
Length between cuttable points:
PA RT N U M B E R B U I L D E R
R I B B O N LY T E S TAT I C W H I T E
Dry or wet location flexible LEDs
12 or 24 Volt
6.0 Watts per foot, 72 LEDs per foot
IP65 and IP68 versions are UV resistant
2400K, 2700K, 3000K, 3500K, 4100K, and 6000K
Cuttable every 1.97 inches (12V) or 3.94 inches (24V)
R I B B O N LY T E 6 . 0
RB
65 - IP6568 - IP68
Blank - None (IP40)
12 - 12V24 - 24V
6.0
24 - 2400K27 - 2700K30 - 3000K35 - 3500K41 - 4100K
60 - 6000K
+ + + + = Your Part NumberExample: RB126.027
Category Waterproof Voltage Wattage Color Temperature
WhiteR I B B O N LY T E 5 . 0
U S AG E GU IDE L INE S
RoHSCompliant
CHANNELPage 114
DR I V ER SPage 234
CONTROL L ER SPage 258
PA RT S A N D AC C E S S O R I E SPage 294
Compatible with a wide variety of control products including the entire line of Lutron dimming systems.
For use with Acolyte drivers, triac dimming modules, 0-10 modules and interface controllers (DMXINF models).
Use with non-Acolyte triac, MLV or ELV drivers is not supported or warrantied.
Due to the nature of the product, RibbonLyte cuttable lengths are generally longer or shorter than the customer requested length. Unless specified, RibbonLyte is factory cut at the shorter cuttable point.
IP65 and IP68 versions can be used in wet, outdoor locations around swimming pools and spa tubs, but not submerged in swimming pools and spa tubs.
We reserve the right to make changes to product lineup, specifications, design and finishes at any time without notice.
AC C E S S O R I E S R I B B O N LY T E 5 . 0
-
S A M P L E B E A M A N G L E S
C O N N E C T I O N OPT IONS
C H A N N E L COMPAT I B I L I TY
Protection Compatible Channels
Non-Waterproof (IP40)
IP65
IP68
( S e e p a g e 2 9 4 f o r s p e c i f i c c o n n e c t o r i n f o r m a t i o n )
( S e e p a g e 1 1 4 f o r m o r e c h a n n e l i n f o r m a t i o n )
3 9ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
D I M E N S I O N S R I B BONLYTE
O U T D O O R - I P 6 8
Width
Length
Height
Width
Length
Height
S P E C I F I C AT I O N S R I B BONLYTE
3 8
30
In AT3Channel
In AP1Channel
93+-
121
121
121
121
+-
+-
121
121
121
121
+-
+-
121
121
121
121
+-
+-
121
121
121
121
+-
+-
121
121
121
121
+-
121
121
121
121
+-
121
121
121
121
+-
121
121
+-
+-
121
121
121
121
+-
+-
121
121
121
121
+-
+-
121
121
121
121
+-
+-
121
121
121
121
+-
121
121
+-
+-
121
121
121
121
+-
+-
121
121
121
121
+-
+-
121
121
121
121
+-
+-
121
121
121
121
+-
+-
121
121
121
121
2.1 mm Connectors
Side Feed IP68 ConnectorsSolder PointJumper Cable
160
Ribbonlyte
126130
In AT1Channel
In AS1Channel
In AC1Channel
150
AC1, AC2, AC4, AC5, AR3, AS3, AT1, AT2, AT3, AP1, W31, W35, WH35
AC1, AC2, AC3, AC4, AC5, AR3, AS3, AT1, AT2, AT3, AP1, W31, W35, WH35
AC4, AC5, AR3, AS3, AT1, AT2, AT3, W31, W35, WH35
R I B B O N LY T E S TAT I C W H I T E
R I B B O N LY T E 6 . 0
End Feed for Hard WiredConnection
Back FeedThrough Back
of Channel
I P 4 0 + I P 6 5
Operating Voltage
Power Consumption
Milliamperes
Protection Rating
Dimming
Operating Temperature
Color Temperature
Lumen Output
Binning Tolerance
LED Beam Angle
Lamp Life
Cuttable
CRI*
*CRI >90 available upon request
Lumens per Watt (per ft)
Constant Voltage
Max Length Before Additional
Power is Needed
0.66 / 16.8 mm
Up to 16.4 (12V) in ~2 inch sections or 26.25 (24V) in ~4 inch sections
0.18 / 4.5 mm
6 . 0
0.50 / 12.7 mm
Up to 16.4 (12V) in ~2 inch sections or 26.25 (24V) in ~4 inch sections
IP40: 0.088 / 2.2 mm IP65: 0.125 / 3.2 mm
12 Volt / 24 Volt
6.0 Watts / Linear Foot
12v: 500 mA / Foot 24v: 250 mA / Foot
IP40/IP65/IP68
Triac / 0-10 Volt / DMX / Lutron A-Series 1% dimming LED drivers
-40 C to 70 C
2400K 2700K 3000K 3500K 4100K 6000K
2400K: 371.46 lm/ft; 2700K: 321.84 lm/ft; 3000K: 331.2 lm/ft;
3500K: 387.36 lm/ft; 4100K: 342.72 lm/ft; 6000K: 358.56 lm/ft
+/- 100K
160
50,000 Hours
12v: Every 1.97 (50 mm) 24v: Every 3.94 (100 mm)
2400K: >50.4; 2700K: >56; 3000K: >62.8;
3500K: >66.3; 4100K: >69.2; 6000K: >73.8
2400K: 61.91 lm/W; 2700K: 53.64 lm/W; 3000K: 55.2 lm/W;
3500K: 64.56 lm/W; 4100K: 57.12 lm/W; 6000K: 59.76 lm/W
Yes
12V: 16 4.9 (5 Meters) 24V: 26 3.0 (8 Meters)
6 . 0
R I B B O N LY T E 6 . 0
-
4 14 0
2400 K 2700 K 3500 K 4100 K 6000K3000 K
3 4 5 6 7
D IMENS IONS
PA RT N U M B E R B U I L D E R
R I B B O N LY T E S TAT I C W H I T E
Dry or wet location flexible LEDs
24 Volt Only
8.8 Watts per foot, 36 LEDs per foot
IP65 and IP68 versions are UV resistant
2400K, 2700K, 3000K, 3500K, 4100K, and 6000K
Cuttable every 1.97 inches
R I B B O N LY T E 8 . 8
RB
65 - IP6568 - IP68
Blank - None (IP40)
8.824
24 - 2400K27 - 2700K30 - 3000K35 - 3500K41 - 4100K
60 - 6000K
+ + + + = Your Part NumberExample: RB248.827
Category Waterproof Voltage Wattage Color Temperature
+
301
301 301
1.97 Inches / 50 mm
8.8 - 24 Volt
0.59 Inches / 15 mm
0.67 Inches / 17 mm
0.09 Inches / 2.3 mm
Width:
LED on center:
Height:
Length between cuttable points:
+
White
ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
R I B B O N LY T E 6 . 0
U S AG E GU IDE L INE S
RoHSCompliant
CHANNELPage 114
DR I V ER SPage 234
CONTROL L ER SPage 258
PA RT S A N D AC C E S S O R I E SPage 294
Compatible with a wide variety of control products including the entire line of Lutron dimming systems.
For use with Acolyte drivers, triac dimming modules, 0-10 modules and interface controllers (DMXINF models).
Use with non-Acolyte triac, MLV or ELV drivers is not supported or warrantied.
Due to the nature of the product, RibbonLyte cuttable lengths are generally longer or shorter than the customer requested length. Unless specified, RibbonLyte is factory cut at the shorter cuttable point.
IP65 and IP68 versions can be used in wet, outdoor locations around swimming pools and spa tubs, but not submerged in swimming pools and spa tubs.
We reserve the right to make changes to product lineup, specifications, design and finishes at any time without notice.
AC C E S S O R I E S R I B B O N LY T E 6 . 0
-
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V-
+12V-
151
151
151
+12V
-
151
+12V
-
+12V
-
151
151
+12V-
151
+12V-
151
+12V
-
151
151
+12V-
151
+12V
-
151
151
S A M P L E B E A M A N G L E S
C O N N E C T I O N OPT IONS
C H A N N E L COMPAT I B I L I TY
160
Ribbonlyte
Protection Compatible Channels
Non-Waterproof (IP40)
IP65
IP68
2.1 mm ConnectorsSide FeedBack FeedThrough Back
of Channel
IP68 ConnectorsSolder PointJumper CableEnd Feed for Hard WiredConnection
( S e e p a g e 2 9 4 f o r s p e c i f i c c o n n e c t o r i n f o r m a t i o n )
( S e e p a g e 1 1 4 f o r m o r e c h a n n e l i n f o r m a t i o n )
4 3ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
O U T D O O R - I P 6 8
S P E C I F I C AT I O N S R I B BONLYTE
4 2
In AC4/AC5Channel
In W31Channel
148 76
AC4, AC5, AR3, AS3, AT1, AT2, AT3, AP1, W31, W35, WH35
AC4, AC5, AR3, AS3, AT1, AT2, AT3, AP1, W31, W35, WH35
AC4, AC5, AR3, AS3, W31, W35, WH35
R I B B O N LY T E S TAT I C W H I T E
R I B B O N LY T E 8 . 8
I P 4 0 + I P 6 5
D I M E N S I O N S R I B BONLYTE 8 . 8
8 . 8
R I B B O N LY T E 8 . 8
Width
Length
Height
0.70 / 17.8 mm
Up to 25 7.1 / 7.80 m
0.19 / 4.8 mm
0.59 / 15 mm
Up to 25 7.1 / 7.80 m
IP40: 0.088 / 2.2 mm IP65: 0.172 / 4.4 mm
24 Volt
8.8 Watts / Linear Foot
367 mA / Foot
IP40/IP65/IP68
Triac / 0-10 Volt / DMX / Lutron A-Series 1% dimming LED drivers
-40 C to 70 C
2400 K 2700K 3000K 3500K 4100K 6000K
2400K: 596.52 lm/ft; 2700K: 615.96 lm/ft; 3000K: 702.72 lm/ft;
3500K: 644.4 lm/ft; 4100K: 628.92 lm/ft; 6000K: 677.52 lm/ft
+/- 100K
160
50,000 Hours
Every 1.97 (50 mm)
2400K: >50.5; 2700K: >58.9; 3000K: >63;
3500K: >65.3; 4100K: >70.8; 6000K: >73.4
2400K: 67.79 lm/W; 2700K: 70.00 lm/W; 3000K: 79.85 lm/W;
3500K: 73.23 lm/W; 4100K: 71.47 lm/W; 6000K: 77.00 lm/W
Yes
25 7.1 (7.80 m)
Operating Voltage
Power Consumption
Milliamperes
Protection Rating
Dimming
Operating Temperature
Color Temperature
Lumen Output
Binning Tolerance
LED Beam Angle
Lamp Life
Cuttable
CRI *
*CRI >90 available upon request
Lumens per Watt (per ft)
Constant Voltage
Max Length Before Additional
Power is Needed
Width
Length
Height
-
ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
R I B B O N LY T E 8 . 8
4 4
S P EC I F I CAT IONS 1 . 5 2 . 2 3 . 0 4 . 4 5 . 0 6 . 0 8 . 8
S TAT I C W H I T E R I B B O N LY T E C O M PA R I S O N G U I D E
R I B B O N LY T E S TAT I C W H I T E 4 5
U S AG E GU IDE L INE S
Operating Voltage
Power Consumption
Current (mA) - 12 V
Current (mA) - 24 V
Protection Rating
Beam Angle
Color Temperatures
LEDs / Foot
Width - IP45 / IP65
Width - IP68
Cuttable Length - 12 V
Cuttable Length - 24 V
Max Length - 12 V
Max Length - 24 V
Lumen / Ft - 2400 K
Lumen / Ft - 2700 K
Lumen / Ft - 3000 K
Lumen / Ft - 3500 K
Lumen / Ft - 4100 K
Lumen / Ft - 6000 K
Lumens / Watt - 2400 K
Lumens / Watt - 2700 K
Lumens / Watt - 3000 K
Lumens / Watt - 3500 K
Lumens / Watt - 4100 K
Lumens / Watt - 6000 K
CRI - 2400 K
CRI - 2700 K
CRI - 3000 K
CRI - 3500 K
CRI - 4100 K
CRI - 6000 K
1.5 W / Ft
125
63
18
0.31
0.41
1.97
3.94
29 4.6
68 7.5
92.86
80.46
82.80
96.84
85.68
89.64
61.91
53.64
55.2
64.56
57.12
59.76
50.4
56.0
62.8
66.3
69.2
73.8
2.2 W / Ft
183
92
9
0.39
0.52
3.94
6.55
26 3
45 10.3
149.13
153.99
175.68
161.10
157.23
169.38
67.79
70.00
79.85
73.23
71.47
77.00
50.5
58.9
63.0
65.3
70.8
73.4
3.0 W / Ft
250
125
36
0.31
0.41
0.98
1.97
19 8.2
32 9.7
185.73
160.92
165.60
193.68
171.36
179.28
61.91
53.64
55.2
64.56
57.12
59.76
50.4
56.0
62.8
66.3
69.2
73.8
4.4 W / Ft
366
183
18
0.39
0.52
1.97
3.94
16 4.9
26 3
298.26
307.98
351.36
322.20
314.46
338.76
67.79
70.00
79.85
73.23
71.47
77.00
50.5
58.9
63.0
65.3
70.8
73.4
5.0 W / Ft
417
208
15
0.41
0.54
2.46
4.92
16 4.9
32 9.7
--
--
438.91
--
441.96
445.01
--
--
87.78
--
88.39
89.00
--
--
72.0
--
70.0
69.0
6.0 W / Ft
500
250
72
0.50
0.66
1.97
3.94
16 4.9
26 3.0
371.46
321.84
331.20
387.36
342.72
358.56
61.91
53.64
55.20
64.56
57.12
59.76
50.4
56.0
62.8
66.3
69.2
73.8
24 V
8.8 W / Ft
--
367
36
0.59
0.70
--
1.97
--
25 7.1
596.52
615.96
702.72
644.40
628.92
677.52
67.69
70.00
79.85
73.23
71.47
77.00
50.5
58.9
63.0
65.3
70.8
73.4
12 V and 24 V versions
IP45, IP65 and IP68
160
2400K, 2700K, 3000K, 3500K, 4100K, 6000K (5.0 is only avail. in 3000K, 4100K, 6000K)
CHANNELPage 114
DR I V ER SPage 234
CONTROL L ER SPage 258
PA RT S A N D AC C E S S O R I E SPage 294
Compatible with a wide variety of control products including the entire line of Lutron dimming systems.
For use with Acolyte drivers, triac dimming modules, 0-10 modules and interface controllers (DMXINF models).
Use with non-Acolyte triac, MLV or ELV drivers is not supported or warrantied.
Due to the nature of the product, RibbonLyte cuttable lengths are generally longer or shorter than the customer requested length. Unless specified, RibbonLyte is factory cut at the shorter cuttable point.
IP65 and IP68 versions can be used in wet, outdoor locations around swimming pools and spa tubs, but not submerged in swimming pools and spa tubs.
We reserve the right to make changes to product lineup, specifications, design and finishes at any time without notice.
AC C E S S O R I E S R I B B O N LY T E 8 . 8
-
4 7
D IMENS IONS
2400 K 2700 K 3500 K 4100 K 6000K3000 K
3 4 5 6 7
PA RT N U M B E R B U I L D E R
R I B B O N LY T E VA R I A B L E W H I T E
Dry or wet location flexible LEDs
12 or 24 Volt
3.0 Watts per foot, 36 LEDs per foot
IP65 and IP68 versions are UV resistant
Warm and cool LEDs - 2400K-6500K CCT range
Cuttable every 0.98 inches (12V) or 1.97 inches (24V)
VA R I A B L E W H I T E 3 . 0
RB
65 - IP6568 - IP68
Blank - None (IP40)
12 - 12V24 - 24V
VW+ + + = Your Part NumberExample: RB12VW
Category Waterproof Voltage Variation
3.0 - 12 Volt
3.0 - 24 Volt
+ +
680
0.98 Inches / 25 mm
0.31 Inches / 8 mm
0.33 Inches / 8.4 mm
0.088 Inches / 2.2 mm
680
680
1.97 Inches / 50 mm
Width:
0.31 Inches / 8 mmWidth:
LED on center:
0.33 Inches / 8.4 mmLED on center:
Height:
0.088 Inches / 2.2 mmHeight:
Length between cuttable points:
Length between cuttable points:
Warm white + Cool white
4 6 ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
VA R I A B L E W H I T E R I B B O N LY T E
Light, at its very essence, is captivating. It warms us. It envelops and blankets us. But light is not a static entity with a single, defining characteristic, and nowhere is that more evident than in the natural light we absorb from the sun.
The beauty of sunlight is ever-changing. From the delicate glow of the early dawn hours to the intense glare of a bright, summer afternoon, the world is bathed in a luminance of endlessly transforming color and intensity.
Our Variable White RibbonLyte was created to mirror this daily rhythm. No longer tethered to a defined color temperature, this product allows you to recreate the light youd observe any time of day; all at the push of a button or turn of a dial.
Pictured: Variable White Amber
RoHSCompliant
-
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V
-
+12V-
151
151
151
+12V-
+12V-
151
151
151
+12V
-
151
+12V
-
+12V
-
151
151
+12V-
151
+12V-
151
+12V
-
151
151
+12V-
151
+12V
-
151
151
S A M P L E B E A M A N G L E S
C O N N E C T I O N OPT IONS
C H A N N E L COMPAT I B I L I TY
160
Ribbonlyte
Protection Compatible Channels
Non-Waterproof (IP40)
IP65
IP68
All Channel
All Channel
All Channel
In AS1Channel
130 60 60 30
In AS4Channel
In AL60Channel
In AT3Channel
In AC1Channel
150
2.1 mm ConnectorsSide FeedBack FeedThrough Back
of Channel
IP68 ConnectorsSolder PointJumper CableEnd Feed for Hard WiredConnection
( S e e p a g e 2 9 4 f o r s p e c i f i c c o n n e c t o r i n f o r m a t i o n )
( S e e p a g e 1 1 4 f o r m o r e c h a n n e l i n f o r m a t i o n )
4 9ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
O U T D O O R - I P 6 8
I P 4 0 + I P 6 5
4 8 R I B B O N LY T E VA R I A B L E W H I T E
VA R I A B L E W H I T E 3 . 0
D I M E N S I O N S VA R I A B L E W H I T E 3 . 0
S P E C I F I C AT I O N S VA R I A B L E W H I T E 3 . 0
VA R I A B L E W H I T E 3 . 0
0.41 / 10.4 mm
Up to 19 8.2 (12V) in ~1 inch sections or 32 9.7 (24V) in ~2 inch sections
0.18 / 4.5 mm
0.31 / 8 mm
Up to 19 8.2 (12V) in ~1 inch sections or 32 9.7 (24V) in ~2 inch sections
IP40: 0.088 / 2.2 mm IP65: 0.125 / 3.2 mm
Operating Voltage
Power Consumption
Milliamperes
Protection Rating
Dimming
Operating Temperature
Color Temperature
Lumen Output
Binning Tolerance
LED Beam Angle
Lamp Life
Cuttable
Lumens per Watt
Constant Voltage
Max Length Before Additional
Power is Needed
12 Volt / 24 Volt
3.0 Watts / Linear Foot
12v: 250 mA / Foot 24v: 125 mA / Foot
IP40/IP65/IP68
Triac / 0-10 Volt / DMX / Lutron A-Series 1% dimming LED drivers
-40 C to 70 C
Warm and Cool LEDs - 2400K-6500K CCT range
89.6 lm/ft - 181.44 lm/ft
+/- 100K
160
50,000 Hours
12v: Every 0.98 (25 mm) 24v: Every 1.97 (50 mm)
29.9 - 60.5 lm/W
Yes
12V: 19 8.2 (6 Meters) 24V: 32 9.7 (10 Meters)
Width
Length
Height
Width
Length
Height
-
5 1ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected] 0
PA RT N U M B E R B U I L D E R
2400 K 2700 K 3500 K 4100 K 6000K3000 K
3 4 5 6 7
D IMENS IONS
R I B B O N LY T E VA R I A B L E W H I T E
6.0 - 12 Volt
6.0 - 24 Volt
+
-
+
-
121
121
1.97 Inches / 50 mm
0.5 Inches / 12.7 mm
0.33 Inches / 8.4 mm
0.5 Inches / 12.7 mm
0.088 Inches / 2.2 mm
0.33 Inches / 8.4 mm
3.94 Inches / 100 mm
+
-
+
-
121
121
121
121
0.088 Inches / 2.2 mm
Width:
LED on center:
Height:
Width:
LED on center:
Height:
Length between cuttable points:
Length between cuttable points:
VA R I A B L E W H I T E A M B E R
RB
65 - IP6568 - IP68
Blank - None (IP40)
12 - 12V24 - 24V
VWA+ + + = Your Part NumberExample: RB12VWA
Category Waterproof Voltage Variation
Dry or wet location flexible LEDs
12 or 24 Volt
6.0 Watts per foot, 72 LEDs per foot
IP65 and IP68 versions are UV resistant
Warm, cool and amber LEDs - 1800K-6500K CCT range
Cuttable every 1.97 inches (12V) or 3.94 inches (24V)
Warm white + Cool white + AmberVA R I A B L E W H I T E 3 . 0
U S AG E GU IDE L INE S
RoHSCompliant
CHANNELPage 114
DR I V ER SPage 234
CONTROL L ER SPage 258
PA RT S A N D AC C E S S O R I E SPage 294
Compatible with a wide variety of control products including the entire line of Lutron dimming systems.
For use with Acolyte drivers, triac dimming modules, 0-10 modules and interface controllers (DMXINF models).
Use with non-Acolyte triac, MLV or ELV drivers is not supported or warrantied.
Due to the nature of the product, RibbonLyte cuttable lengths are generally longer or shorter than the customer requested length. Unless specified, RibbonLyte is factory cut at the shorter cuttable point.
IP65 and IP68 versions can be used in wet, outdoor locations around swimming pools and spa tubs, but not submerged in swimming pools and spa tubs.
We reserve the right to make changes to product lineup, specifications, design and finishes at any time without notice.
AC C E S S O R I E S VA R I A B L E W H I T E 3 . 0
-
S A M P L E B E A M A N G L E S
C H A N N E L COMPAT I B I L I TY
Protection Compatible Channels
Non-Waterproof (IP40)
IP65
IP68
( S e e p a g e 1 1 4 f o r m o r e c h a n n e l i n f o r m a t i o n )
5 3ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
O U T D O O R - I P 6 8
I P 4 0 + I P 6 5
5 2
AC1, AC2, AC3, AC4, AC5, AR3, AS3, AT1, AT2, AT3, AP1, W31, W35, WH35
AC1, AC2, AC3, AC4, AC5, AR3, AS3, AT1, AT2, AT3, AP1, W31, W35, WH35
AC4, AC5, AR3, AS3, AT1, AT2, AT3, W31, W35, WH35
( S e e p a g e 2 9 4 f o r c o n n e c t o r s )
C O N N E C T I O N OPT IONS
I L L U M I N A N C E DATA
I l l u m i n a n c e p e r f o o t ( i n l u x a n d f o o t c a n d l e s )
R I B B O N LY T E VA R I A B L E W H I T E
VA R I A B L E W H I T E A M B E R
6 . 2 f t 6 f t
B e a m W i d t h
V e r t i c a l S p r e a d H o r i z o n t a l S p r e a d
1 2 . 5 f t 1 2 f t
1 8 . 7 f t 1 8 f t
2 4 . 9 f t 2 4 f t
3 1 . 1 f t 3 0 f t
2 1 9 . 5 8 l x
2 0 . 4 f c
5 4 . 9 0 l x
5 . 1 f c
2 4 . 7 6 l x
2 . 3 f c
1 3 . 9 9 l x
1 . 3 f c
8 . 6 1
. 8 f c
2 f t
. 6 1 m
4 f t
1 . 2 2 m
6 f t
1 . 8 3 m
8 f t
2 . 4 4 m
1 0 f t
3 . 0 5 m
30
In AT3Channel
In AP1Channel
93112-160
Ribbonlyte
126130
In AT1Channel
In AS1Channel
In AC1Channel
150
D I M E N S I O N S VA R I A B L E W H I T E A M B E R
S P E C I F I C AT I O N S VA R I A B L E W H I T E A M B E R
VA R I A B L E W H I T E A M B E R
Width
Length
Height
Width
Length
Height
0.66 / 16.8 mm
Up to 19.7 (12V) in ~2 inch sections or 26.25 (24V) in ~4 inch sections
0.18 / 4.5 mm
0.50 / 12.7 mm
Up to 19.7 (12V) in ~2 inch sections or 26.25 (24V) in ~4 inch sections
IP40: 0.088 / 2.2 mm IP65: 0.125 / 3.2 mm
Operating Voltage
Power Consumption
Amperage
Protection Rating
Dimming
Operating Temperature
Color Temperature
Lumen Output (per foot)
Binning Tolerance
LED Beam Angle
Lamp Life
Cuttable
CRI *CRI >90 available upon request
CIE 31 Chromacity Coordinate
CIE 76 Chromacity Coordinate
Lumens per Watt (per foot)
Constant Voltage
Max Length Before Additional
Power is Needed
12 Volt / 24 Volt
6.0 Watts / Linear Foot
12v: 500 mA / Foot 24v: 250 mA / Foot
IP40/IP65/IP68
Triac / 0-10 Volt / DMX / Lutron A-Series 1% dimming LED drivers
-40 C to 70 C
Warm, cool and amber LEDs - 1800K-6500K CCT range
227.7 lm/ft (when all 3 channels at 100%)
+/- 100K
Vertical spread: 114.6, Horizontal spread: 112.6
50,000 Hours
12v: Every 1.97 (50 mm) 24v: Every 3.94 (100 mm)
Ra: >55.48
x: .434, y: .381
u: .259, v: .511
37.95 lm/W
Yes
12V: 19 8.2 (6 Meters) 24V: 26 3.0 (8 Meters)
-
5 5ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected] 4 R I B B O N LY T E VA R I A B L E W H I T E
PA RT N U M B E R B U I L D E R
2400 K 2700 K 3500 K 4100 K 6000K3000 K
3 4 5 6 7
D IMENS IONS
Dry or wet location flexible LEDs
12 or 24 Volt
6.0 Watts per foot, 72 LEDs per foot
IP65 and IP68 versions are UV resistant
Warm, cool and amber LEDs - 1800K-6500K CCT range
Cuttable every 1.97 inches (12V) or 3.94 inches (24V)
6.0 - 12 Volt
6.0 - 24 Volt
+
-
+
-
121
121
1.97 Inches / 50 mm
0.5 Inches / 12.7 mm
0.33 Inches / 8.4 mm
0.5 Inches / 12.7 mm
0.088 Inches / 2.2 mm
0.33 Inches / 8.4 mm
3.94 Inches / 100 mm
+
-
+
-
121
121
121
121
0.088 Inches / 2.2 mm
Width:
LED on center:
Height:
Width:
LED on center:
Height:
Length between cuttable points:
Length between cuttable points:
VA R I A B L E W H I T E R E D
65 - IP6568 - IP68
Blank - None (IP40)
12 - 12V24 - 24V
VWRRB + + + = Your Part NumberExample: RB12VWR
Category Waterproof Voltage Variation
Warm white + Cool white + RedVA R I A B L E W H I T E A M B E R
U S AG E GU IDE L INE S
RoHSCompliant
CHANNELPage 114
DR I V ER SPage 234
CONTROL L ER SPage 258
PA RT S A N D AC C E S S O R I E SPage 294
Compatible with a wide variety of control products including the entire line of Lutron dimming systems.
For use with Acolyte drivers, triac dimming modules, 0-10 modules and interface controllers (DMXINF models).
Use with non-Acolyte triac, MLV or ELV drivers is not supported or warrantied.
Due to the nature of the product, RibbonLyte cuttable lengths are generally longer or shorter than the customer requested length. Unless specified, RibbonLyte is factory cut at the shorter cuttable point.
IP65 and IP68 versions can be used in wet, outdoor locations around swimming pools and spa tubs, but not submerged in swimming pools and spa tubs.
We reserve the right to make changes to product lineup, specifications, design and finishes at any time without notice.
AC C E S S O R I E S VA R I A B L E W H I T E A M B E R
-
S A M P L E B E A M A N G L E S
C H A N N E L COMPAT I B I L I TY
Protection Compatible Channels
Non-Waterproof (IP40)
IP65
IP68
( S e e p a g e 1 1 4 f o r m o r e c h a n n e l i n f o r m a t i o n )
5 7ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected]
O U T D O O R - I P 6 8
I P 4 0 + I P 6 5
5 6
AC1, AC2, AC3, AC4, AC5, AR3, AS3, AT1, AT2, AT3, AP1, W31, W35, WH35
AC1, AC2, AC3, AC4, AC5, AR3, AS3, AT1, AT2, AT3, AP1, W31, W35, WH35
AC4, AC5, AR3, AS3, AT1, AT2, AT3, W31, W35, WH35
C O N N E C T I O N OPT IONS
I L L U M I N A N C E DATA
I l l u m i n a n c e p e r f o o t ( i n l u x a n d f o o t c a n d l e s )
6 . 2 f t 6 f t
B e a m W i d t h
V e r t i c a l S p r e a d H o r i z o n t a l S p r e a d
1 2 . 4 f t 1 2 f t
1 8 . 6 f t 1 8 f t
2 4 . 8 f t 2 4 f t
3 1 . 0 f t 3 0 f t
2 1 7 . 4 3 l x
2 0 . 2 f c
5 3 . 8 2 l x
5 . 0 f c
2 3 . 6 8 l x
2 . 2 f c
1 3 . 9 9 l x
1 . 3 f c
8 . 6 1 l x
. 8 f c
2 f t
. 6 1 m
4 f t
1 . 2 2 m
6 f t
1 . 8 3 m
8 f t
2 . 4 4 m
1 0 f t
3 . 0 5 m
R I B B O N LY T E VA R I A B L E W H I T E
VA R I A B L E W H I T E R E D
( S e e p a g e 2 9 4 f o r c o n n e c t i o n o p t i o n s )
30
In AT3Channel
In AP1Channel
93112-160
Ribbonlyte
126130
In AT1Channel
In AS1Channel
In AC1Channel
150
D I M E N S I O N S VA R I A B L E W H I T E R E D
S P E C I F I C AT I O N S VA R I A B L E W H I T E R E D
VA R I A B L E W H I T E R E D
Width
Length
Height
Width
Length
Height
Operating Voltage
Power Consumption
Amperage
Protection Rating
Dimming
Operating Temperature
Color Temperature
Lumen Output (per foot)
Binning Tolerance
LED Beam Angle
Lamp Life
Cuttable
CRI
CIE 31 Chromacity Coordinate
CIE 76 Chromacity Coordinate
Lumens per Watt (per foot)
Constant Voltage
Max Length Before Additional
Power is Needed
0.66 / 16.8 mm
Up to 19.7 (12V) in ~2 inch sections or 26.25 (24V) in ~4 inch sections
0.18 / 4.5 mm
0.50 / 12.7 mm
Up to 19.7 (12V) in ~2 inch sections or 26.25 (24V) in ~4 inch sections
IP40: 0.088 / 2.2 mm IP65: 0.125 / 3.2 mm
12 Volt / 24 Volt
6.0 Watts / Linear Foot
12v: 500 mA / Foot 24v: 250 mA / Foot
IP40/IP65/IP68
Triac / 0-10 Volt / DMX / Lutron A-Series 1% dimming LED drivers
-40 C to 70 C
Warm, cool and amber LEDs - 1800K-6500K CCT range
225.6 lm/ft (when all 3 channels at 100%)
+/- 100K
Vertical spread: 114.3, Horizontal spread: 112.7
50,000 Hours
12v: Every 1.97 (50 mm) 24v: Every 3.94 (100 mm)
Ra: >91.33
x: .473, y: .362
u: .296, v: .509
37.6 lm/W
Yes
12V: 19 8.2 (6 Meters) 24V: 26 3.0 (8 Meters)
-
ACOLYTE LED 251 West 30th St, Suite 12E New York, NY 10001 212.629.6830 [email protected] 8 Pictured: RibbonLyte 4.4 2400K @ Roberts Steakhouse, Atlantic City, NJ
VA R I A B L E W H I T E R E D
U S AG E GU IDE L INE S
CHANNELPage 114
DR I V ER SPage 234
CONTROL L ER SPage 258
PA RT S A N D AC C E S S O R I E SPage 294
Compatible with a wide variety of control products including the entire line of Lutron dimming systems.
For use with Acolyte drivers, triac dimming modules, 0-10 modules and interface controllers (DMXINF models).
Use with non-Acolyte triac, MLV or ELV drivers is not supported or warrantied.
Due to the nature of the product, RibbonLyte cuttable lengths are generally longer or shorter than the customer requested length. Unless specified, RibbonLyte is factory cut at the shorter cuttable point.
IP65 and IP68 versions can be used in wet, outdoor locations around swimming pools and spa tubs, but not submerged in swimming pools and spa tubs.
We reserve the right to make changes to product lineup, specifications, design and finishes at any time without notice.
AC C E S