1

ActuatorID16ID16 is an actuator suitable for solar tracker application with maximum load of 5500N. There are various positioning feedback options available, such as dual Hall sensor, POT and reed sensor.

Option

- Dual Hall effect sensor for digital positioning feedback- Reed sensor for digital positioning feedback- Potentiometer for analog positioning feedback

Feature

- Main application: Industrial- Input voltage: 24V DC- Max. dynamic: 5500N- Max. static load: 13600N- Max. speed at no load: 3.3mm/sec- Max. speed at full load: 2.67mm/sec @ 5500N- Stroke: 450 mm (18”) / 600 mm (24”) / 900 mm (36”) (other strokes are available)- Max. current: 2.3A @ 24V DC- IP Protection level: IP65- ACME threaded spindle- Preset limit switches- Power wire length: 250 mm bare wires- Duty cycle: 10%, max. 2 min. continuous operation in 20 min.- Ambient operation temperature: -20°C ~ +65°C- Certified: CE Marking, EMC Directive 2014/30/EU

All Saints Industr ial Estate, Shi ldon, Co,Durham DL4 2RDT+44 (0)1388 778400 F+44 (0)01388 778800W: www.moteck.co.uk E : sales@crd-devices.co.uk

Dimensions

600 mm (24”)Stroke (S)Retracted Length (A) 813

450 mm (18”)963

900 mm (36”)1263

15

13

83.1472

2066

.7(6

7.93

)

149.

8410

7

S

50

A

34 35.2

50.8

63.5

(140.5)18.2

3573.910.5

13

13

2

Performance Data

Model No. Push / Pull Max. (N)

Speed (mm/s)

No load Full load

Current (A) @ 24V DC

No load Full load

5500 3.3 2.67 0.8 2.3ID16-24D5AXXX-XXXX0XX

Spe

ed (m

m/s

)

Speed vs. Load

1000 2000 3000 4000

Load (N)

0

0.6

1.2

1.8

2.4

3.0

5000 6000

3.6

Cur

rent

(A)

Current vs. Load

1000 2000 3000 4000

Load (N)

0

0.5

1.0

1.5

2.0

2.5

5000 6000

3.0

3

Wiring

Standard

With Hall effect sensor x 2Resolution：11.42 pulses/mm

With reed sensorResolution：1.18 pulses/mm

WY

B

WB Y

With potentiometer (POT)The resistance between blue and white wires increases when the actuator extends, and decreases when it retracts.

Power SignalRed BlackM+ M-

White Orange Blue BrownGND VCC Data 2Data 1

PowerRed BlackM+ M-

Power SignalRed BlackM+ M-

White YellowGND Data

Power SignalRed BlackM+ M-

White Yellow BlueGND VCC Data

450600900

0.3 ~ 7.90.3 ~ 8.30.3 ~ 7.4

Value of PoteniometerStroke (mm) Resistance (±0.3KΩ)

* Remarks:Connect Red (M+) to ‘+’ & Black (M-) to ‘-’ of DC power, the actuator will extend.

4

Terms of UseThe user is responsible for application suitability of Moteck products. As ongoing improvement process continues, products listed on the Moteck website are subject to change without prior notice. Moteck reserves the right to terminate the sales or remove any product displayed on the website, or listed in its catalogues.

IP Protection level

Others

Reserved

5: IP65

1: Cable outlet at body side with steel inner tube2: Cable outlet at body side with stainless steel inner tube

Input voltage

Stroke

Front connector

Rear connector

Spindle type

24: 24V DC

5A: ACME / 5TPI

Spherical rod eye0: Ø13 mm1: Ø12 mm2: Ø16 mm

Clamp with spherical rod eye0: Ø13 mm1: Ø12 mm2: Ø16 mm

450: 450 mm (18”)600: 600 mm (24”)900: 900 mm (36”)

Positioning feedback

H: Hall effect sensor x 2R: Reed sensorP: Potentiometer0: None

Cable 1: Bare wires / 250 mm / Black

Motor code D

ID16 - 24 D 450 -5A 0 0 H 1 0 5 1

Ordering Key

0: No meaning