Hospital bed

Light and handy

Economic alternative

The Adatto hospital bed is an economically sound alternative. Adatto has 4-sectional mattress base and it comes with a wide range of assemblies and options. Other Merivaara bed accessories are compatible with Adatto. Due to its adaptability, wide range of accessories and excellent handling, Adatto is suitable for use from long-term wards to ICU wards. Adatto’s modularity allows it to be adapted to suit any need.

Adatto’s 4-sectional mattress base is easy to keep clean. The perforated, bubble-like base structure en-sures air circulation between the bed and mattress.

The bed can be extended with 20 cm adjustable bed end and extension board. The extendable bed end fi ts all models.Extension board: 80 cm 10000 0718 90 cm 10000 0728

Mini-ACP limiter 10000 1099Battery series 10000 1091

Design castors, Ø 150 mm or Ø 125 mm.Central locking system.

PJP castors, Ø 125 mm.Central locking system.

Individual locking castors, Ø 125 mm.

The grab handle is a safe and ergonomic patient assistance device, which is suitable for use with most patients. The grab handle enhances patient self-initiative. The unique fi xing of grab handle does not widen the bed, thus allowing it to fi t easily through doors and into elevators.

Correct, variable treatment positions are of the utmost importance for patient well-being. Studies show that a versatile use of bed adjustments considerably reduces pressure on the skin and activates and rehabilitates the patient.

The multiple positions of the Adatto bed can be easily adjusted using a hand controller. The sliding and rising adjustment of the back section combined with the leg angle adjustment keeps the patient’s centre of gravity fi rmly in place. The skin is not stretched, and the risk of pressure sores forming reduces sig-nifi cantly. According to studies, there is up to 90% less shifting in the centre of gravity compared to two and three-sectional beds.

The Adatto hospital bed’s range of adjustments is truly extensive. The mattress base is also easily extended using an adjustable foot end and extension board.

Adatto is a tool, which is designed to facilitate nursing work. Adatto’s lightness and ease of use make patient transfers and supporting treatment positions easy, while reducing back strain on the nursing staff.

Excellent treatment capabilities

The position of the Adatto mattress base

(40° back angle, 35° hip angle, knee angle in up-

per position) has been proven to evenly distri-

bute pressure on the skin for patients of diffe-

rent sizes. The position is especially recommended for

long-term bed care.

Adatto bed with Nova Sensiva mattress• 40° back angle

• 35° hip angle

• knee angle in upper position

Average pressure: 4.22 mmHg

Maximum pressure: 20.0 mmHg

Two-sectional bed with basic mattress• 40° back angle

• 0° hip angle

Average pressure: 56.2 mmHg

Maximum pressure: 200 mmHg

Measurement results for the distribution of pressure on the skin

The cardiac chair position is the recommended resting position for many different patient groups.

The Fowler position with knee angle adjustment distributes even-ly pressure on the skin and relieves swelling in the lower extremities.

The electrically-adjusted back section has a sliding, conforming movement.

The Psoas position relaxes the back and relieves swelling in the lower extremities.

The CPR position can be quickly adjusted using the manual Trendelenburg handle.

This position combines back angle and Trendelenburg adjustments.

Special attention was given to functional ergonomics and patient comfort in designing the Adatto hospital bed. The bed has user-friendly handling surfaces and its colour range has been carefully selected. The bed and its accessories are visually compatible with other Merivaara products.

Silent and practical functions together with the extensive range of accessories support daily nursing tasks and impro-ve patient comfort.

Functional design and colour options

Design ends, fi xed to the frame model,mounted in subframe holes.

80 cm............ 10000 9890 white 10000 9892 light blue 10000 9898 blue90 cm............ 10000 9990 white 10000 9992 light blue 10000 9998 blue

Medium subframe with accessories

Adjustable design end, mounted on mattress base frame tubing. Adjustable length: + 20 cm.

80 cm.......... 10000 9880 white 10000 9882 light blue 10000 9888 blue90 cm.......... 10000 9980 white 10000 9982 light blue 10000 9988 blue

Basic end, fi xed to the frame model, mounted on subframe adapters.

80 cm....... 10000 9870 white 10000 9871 grey 10000 9874 beech90 cm....... 10000 9970 white 10000 9971 grey 10000 9974 beech

Long subframe

Swing-down side rail

10000 9775

Foldable side rail

10000 9754

Adatto’s extensive selection of accessories are ergonomical and support the patient reha-bilation.

Accessories

Lifting pole, with standard triangle 10000 9774

Lifting pole, with roll-up triangle 10000 9776

IV rod, 4 hooks10000 0499

IV rod, 2 hooks 12800 9720

IV rod, 4 hooks,angled shaft 10000 9778

Utility basket, baseframe mount (only for 90 cm beds) 12800 9783

Urine bottle holder 12800 9790

Nametag holder 10000 0798

Grab handle 10000 9755

Monitor / journal tray (writing position)12800 9768

Monitor / journal tray 12800 9768

Patient journal basket 10000 0784 (pictured) or 12800 9784

Merivaara hospital furnishings are designed, manufactured and delivered in accordance with individualised Quality Management System Standard ISO 9001:2000. The Environmental Management System of Merivaara is certifi ed according to ISO 14001:1996 stan-dard. Having been in operation since 1901, Merivaara can guaran-tee the customer that its products are functional and safe. Best for the patient, best for the nurse. For one hundred years.

Merivaara quality

TECHNICAL SPECIFICATIONS

• frame: epoxy coated steel; several colour options• mattress base: 4-sectional, specially-contoured plates in ABS plastic• height adjustment mechanism: epoxy coated steel• castors: Ø 125 mm or 150 mm, central braking system, with a directional castor• bumper rollers on mattress base corners

DIMENSIONS• overall length: 2156 mm (Scandinavian model) (medium subframe) or 2237 mm (long subframe)• bed width: 830 mm or 930 mm• overall width: 885 or 985 mm with side rails mounted• recommended mattress size: 750 x 2000 mm or 850 x 2000 mm• weight: approx.100 kg without accessories• maximum load: 225 kg with equipment

ADJUSTMENTS• mattress base height adjustment: 415 – 780 mm hydraulically or 445 – 810 mm electrically operated• back section: electrically operated or gas spring-assisted, ergonomically sliding and rising movement• thigh section: electrically operated or gas spring assisted• calf section: manually operated (gas spring assisted)• Trendelenburg (26º) and anti-Trendelenburg (7º) adjustments manually operated (gas spring assisted)

ACCESSORIES AND OPTIONSExtensive selection of accessories and colour/design options• various bed end models and colour options• frame colour options• castors Ø 125 and 150 mm• side rails (different models)• grab handle• lifting poles• IV rods• monitor / journal tray• various utility baskets• urine bottle holder• mini-ACP limiter• battery series

3-year guarantee

Takt

um/M

arkp

rint

6/2

004

100

0 3

/1

Rig

hts

to m

odel

and

str

uctu

ral c

hang

es r

eser

ved

.

Light and handy hospital bed

Medium subframe adjustments (electrically operated)

Long subframe adjustments (electrically operated)

Trendelenburg and anti-Trendelenburg adjustments

Merivaara Corp.Puustellintie 2, FI-15150 LAHTI, FINLANDTel. +358 3 3394 611 • Fax +358 3 3394 6144merivaara@merivaara.fi

www.merivaara.com