added room - bundutec · quick tip: add another rivet or bolt to hook the loops onto to keep your...
TRANSCRIPT
ADDED ROOMMANUAL
TM
The ADDED ROOM
2
Our Added Room follows the same product guidelines – ease of use.
It offers a private entry to your tent and keeps off the rain.
It has openings on each side at the top which, due to its nature, cannot be permanently closed.
The side panel used to enclose it is a basic design that offers privacy and ventilation.
It was also designed to be easy to use and remove and does not offer any luxurious trimmings, but rather a straightforward design with utility in mind.
The Added Room comes in a standard size and a custom size for longer BunduTops. Please note that - it can’t be manufactured smaller than our standard size.
PLEASE NOTE that when using it for the first time the canvas can be stiff. It gets coated with various resins to ensure its longevity and UV qualities, so when first operating the canvas has no “memory” of how to fold.
After a couple of uses, the canvas will evolve a “memory” of how to fold and the folding will be-come neater and easier as time passes. The initial folding process will seem stiff but with time it will ease into its shape and fold neatly.
INCLUDESYou Will Receive:
• 1 x Long Rope Guide Extrusion• 2 x Short Rope Guide Extrusion• 2 x Rods• 1 x Round Tube• 1 x Added Room Roof• Side Panel Optional
Pros & ConsPros:
• The added room offers shade, keeps off rain and offers a private entry to your tent when utilising the side panel.
Cons:• It absolutely cannot be closed entirely where the top of the added room goes under the tent awning. There will be a small opening.
TO GET THE FULL BENEFIT OF YOUR GUARANTEES AND WARRANTIES PLEASE READ THE MANUAL IN ITS ENTIRETY
How TOS:Step 1:Mount the long Rope Guide Extrusion on the edge on TOP of the BunduTop, not the side.The Added Room will slide into this slot.
Step 2:Mount the two short Rope Guide Extrusions on the sides of the BunduTop, one to each side.When open the rods will slide into the guides.
QUICK TIP: ADD ANOTHER RIVET OR BOLT TO HOOK THE LOOPS ONTO TO KEEP YOUR ADDED ROOM’S SIDES TAUT.
Step3:Slide the Added Room into the top long Rope Guide.Knot each end so that it will stay in place and cut off any extra length rope. You can glue the rope as well as an extra safety measure against the knot untying.Unzip the bag and unroll the canvas.
Step 4:Lift the BunduTop until it is about half way open.This is to assist with inserting the rods – it keeps the mass of canvas out of your way and makes the process easier.
Step 5:Fit the Rods into the holes on the Tube, and then slide them into the Rope Guide on the sides.
Step 6:Open your BunduTop completely.You can now fit the Side Panel to the Added Room if necessary.
3
THE GUARANTEES AND WARRANTIES DO NOT COVER USER ERROR
By phoning the office, Front Desk can follow up on allcalls and make sure they are attended to.
South AfricaBunduTecFront DeskTel: +27 6 3782 7667Email: [email protected]
AustraliaBundutec AustraliaTel: +61 414 500 430Email: [email protected]
United Arab EmiratesThe Great WhiteTel: +97 15 0350 2735Email: [email protected] | [email protected]
Europe & United KingdomTuff-Trek LtdTel: +44 078 6329 5172Email: [email protected]
KenyaAlan BrooksTel: +25 47 4363 4921Email: [email protected]
NamibiaOffroad Center WindhoekTel:+26 4 6123 7532Email: [email protected]
Bushwhackers Campworld SwakopmundTel:+26 4 6440 0396Email: [email protected]
Bushwhackers WindhoekTel: +26 46 125 8760Email: [email protected]
United States of AmericaBundutecUSA, Email: [email protected]: +1 319-234-0071
CONTACT US