adicos hotspot - datenblatt · pdf file applications characteristics adicos hotspot-x22 are...

www.adicos.com

Applications

Characteristics

ADICOS HOTSPOT-X22 are thermographic detectors of the Advanced Discovery System („ADICOS“), which was specifically created to provide reliable early fire detection in industrial surroundings.

HOTSPOTs are parametrizable compact Infrared camera systems with integrated signal processing and evaluation. Their sturdy design protects them against surrounding dust and humidity, which enables them to operate in rough industrial surroundings, especially dust-explosive atmospheres with -classification 22. Typical applica-tions for HOTSPOT-X22 are for example the detection of overheating drives or bearings of conveyor systems and the monitoring of spontaneously inflammable bulk ma-terials on conveyor belts or in storage facilities.

Power-supply and data communication for the detec-tors in the system are provided over the ADICOS M-Bus. A simple wiring concept with prewired ADICOS system cables and specially designed connection boxes keeps installation simple and fast. A service PC with the ADICOS Manager connected to an ADICOS M-Busmaster or the ADICOS fire alarm panel BMZ-30 can address each de-tector individually for advanced data-logging and para-metrization features. In this way alarm thresholds can be adapted perfectly to the atmosphere around the specific detector. Displaying and analysing temperature curves is also a key feature of the software.

Open or enclosed belt conveyors for dust-explosive bulk materials

Storage facilities and bunkers for spontaneously inflammable materials with -classification 22

Drives, shredders, dryers, coolers, chutes and funnels with -classification 22

Silos and mills with -classification 22

Sturdy design with aluminium diecast housing Extensive tolerance towards humidity and dust Detection of smoldering nests Fast reaction time Adjustable alarm thresholds for each pixel Detection not effected by airflow Fast and easy installation due to pre-wired cable

for power-supply and data-signals Zentrale Datenerfassung und Visualisierung über

PC-Software Central data archiving and visualization with

service PC Interface-modules for common fire alarm systems

such as BOSCH LSN and SIEMENS SIGMASYS Suitable for process monitoring

HOTSPOT-X22

HOTSPOT-X22Industrial-suited parametrizable Infrared heat detectors with integrated signal evaluation for ATEX-Zone 22

425-2410-003 EN2.0 - 07/2015 | / 4

GTE Industrieelektronik GmbHHelmholtzstr. 21, 38-40 | D-41747 Viersen, GERMANY | +49(0)2162 / 3703-0 | [email protected] | www.adicos.com

Technical changes reserved! 425-2410-003 EN2.0 - 07/2015 | / 4

HOTSPOT-X22 - Specifikation

92,5

37

100

14

40

20,5

62,5

100

42 23,5

36,5

Electrical characteristicsSupply voltage 24 ... 40 V DC (Error-status at 20 V or less)Power consumption (without internal heating) 1 VAPower consumption (with internal heating) 10 VAInternal fusing 2 x 375 mAM-Bus max. line length ≈ 2 kmM-Bus max. line capacity ≈ 200 nFM-Bus baudrate 4800 baudLimit contact alarm relay 680 Ω , 20 mA max. (Alarm N/O relay)Limit contact error relay 0 Ω , 40 V / 20 mA max. (Error N/C relay)

All dimensions in mm.

Mechanical dimensions

Thermal characteristicsRelative humidity 0 ... 99 % (non-condensing) In case of continual condensation, use internal heatingTemperature range -10 ... +50 °C

Mechanical characteristicsEnclosure Coated aluminium diecast (corrosion-resistant)Weight 0,6 kg (without connection cable)Protection class IP 64

Connection cable Ø11 prewired



LEGEND:NT : External power supplyExt. Modul e : Connection-module for FDnet or LSNiBMA : Non-ADICOS fire alarm panel (e.g. BOSCH, SIEMENS)BMZ30 / M-BM : ADICOS fire alarm panel BMZ30 oder ADICOS M-Busmaster AN/XF NT / USV : External power supply / uninterruptible power supply

Electrical connection

ADICOS topology concept

HOTSPOT-X22 - Specifications

Cable occupation HOTSPOT

Color Signalred Supply voltage

24 ... 40 V DC (non-polar)blackred/blue

M-Bus (non-polar)pink/greygrey FDnet (+)

LSN a outPMA in/out a

0 ... 5 V0 ... 10 VPre-alarm N/O

violet FDnet-B (–)LSN b2 outWS out b

0 V0 VPre-alarm C

blue FDnet (+)LSN a in PMA in/out a

4 ... 20 mA

pink FDnet-A (–)LSN b1 inPMA in b

4 ... 20 mA

Pre-alarm N/Cyellow Relay output X6 e - Alarm N/Owhite Relay output X6 a - Alarm N/Obrown Relay output X7 a - Error N/Cgreen Relay output X7 e - Error N/C

ADICOS-Detectors

ADICOS M-BUS

External power-supplyADICOS

ADICOS-AAB

ADICOS Service-PC

Further detectors

BMZ-30 ADICOS NT V40-A3(optional)

Detector characteristicsSensor resolution 32 x 31 pixelsOptical angle 53° x 52° (90° x 90° on request)Reaction time 1 sTemporal resolution 0,1 s or 1 s (depends on configuration)

+24

V

0 V

M-B

us A

M-B

us B

B1 A1 B2 A2 X6e

X7e

X6a

X7a

0 V

+24 V

PE

PE

+24 V

0 V

X7 (St)

X6aus (Al)

X6ein (Al)

LOOP B

LOOP A

M-Bus A

M-Bus B

+24 V

0 V

X7 (St)

X6aus (Al)

X6ein (Al)

LOOP B

LOOP A

M-Bus A

M-Bus B

CONNECTION BOX

HOTSPOT-X22

Alarm relay Error relay

R1 R2

StandardR1 = 680 Ω R2 = ∞

StandardR3 = 0 Ω R4 = ∞

R3 R4

NT

FAS

BMZ30 / M-BM

Ext. Module

NT / USV

BMZ-Module



HOTSPOT-X22 - ApplicationPlanning notes for ADICOS-Detectors

ATTENTION!Planning of fire detection system for industrial surroundings requires special expertise.Placement and alignment of ADICOS-Detectors has to be done by specialist planners!

Application example

HOTSPOT mounting bracket with ball joint

HOTSPOT-X22 with purge-air connection and HOTSPOT mounting bracket with ball joint for monitoring of a chute next to a conveyor belt

E

D

C

B

AA

B

C

D

E

1 2 3 4

GTE Industrieelektronik GmbHHelmholtzstr. 2141747 ViersenTel.: 02162-3703-27

max

50

Projekt: ADICOS HOTSPOT 256/1000

Dateityp:ASSEM

Dateiname der Zeichnung: HOTSPOT-256-1000_PURGE_MBRACKET

TolerierungISO 8015

Allg. ToleranzDIN ISO 2768 m-K

OberflaecheDIN ISO 1302

Werkst.-KantenDIN ISO 13715

Maßstab 1:2 / 3:10 Gew.: kgWerkstoff: Halbzeug:

Datum Name Benennung: HOTSPOT 256/100 with purge-air connectionmounted on HOSPOT mounting bracket with ball joint

Bear. 20.04.2015 C. Pfeiffer Gepr. Norm

Zeichnungsnummer:

410-2001-031...033Blatt1

5 Bl.Kür. Änderung Datum Ver. (Urspr.) (Ers.f.:) (Ers.d.:)

Release toadjust tilt

410-2003-019purge-air connection

410-2003-018Mounting bracket with ball joint

E

D

C

B

AA

B

C

D

E

1 2 3 4

GTE Industrieelektronik GmbHHelmholtzstr. 2141747 ViersenTel.: 02162-3703-27

105

76

102

150

8,5

Projekt: ADICOS HOTSPOT 256/1000

Dateityp:ASSEM

Dateiname der Zeichnung: HOTSPOT-256-1000_PURGE_MBRACKET

TolerierungISO 8015

Allg. ToleranzDIN ISO 2768 m-K

OberflaecheDIN ISO 1302

Werkst.-KantenDIN ISO 13715

Maßstab 7:10 Gew.: kgWerkstoff: Halbzeug:

Datum Name Benennung: HOTSPOT 256/100 with purge-air connectionmounted on HOSPOT mounting bracket with ball joint

Bear. 20.04.2015 C. Pfeiffer Gepr. Norm

Zeichnungsnummer:

410-2001-031...033Blatt4

5 Bl.Kür. Änderung Datum Ver. (Urspr.) (Ers.f.:) (Ers.d.:)

adicos hotspot - datenblatt · pdf file applications characteristics adicos hotspot-x22 are...

Documents