PLASMABOY

With cutting speeds up to 1800mm per minute (can be increased on request) the Rapid Plasmaboy is the only cost effective way to cut plates in all materials.

We recommend Hypertherm Power Sources but your current plasma will take the Thermal Dynamics 1Torch to produce quality cuts with minimal post cleaning.

As the cutting speed is so high, there is no dross and minimal heat input.

Perfect for beveling and for cutting large circles with a circle cutting attachment.

Interlocking 1.8m steel track is included and extra track is available for long runs.Interlocking 1.8m steel track is included and extra track is available for long runs.

This is a very easy to use machine. It has a forward and reverse switch, a speed controller and a clutch control for freewheeling the carriage.

Full X Y adjustment of the torch is catered for and the torch can be lowered into the webs of H section beams.

It comes with a twelve month parts and labour warranty.

Contact us for further details.

15mm Plate at 2.4m/min100amp Plasma

Cutting Speed 300 to 1800 mm per minute (can be increased POA)Available in 110v or 240vmains input versions

http:/

/www.ra

pidweld

ing.co

m