2

Assembly: Start with sanding each wood piece to remove any rough edges. Remember to sand in the direction of the wood grain. Glue and nail the pieces together. Allow glue to completely dry.

Contents:

WARNING: ChokING hAzARd Toy contains small parts and functional/sharp points. Not for children under 4 years old. Adult supervision required.

3

Made in Thailand exclusively for The Home Depot by Houseworks, Ltd.2388 Pleasantdale Road, Atlanta, GA 30340 • 71128 • Thailand 0919

Mini hockey GaMe

•Fine Sandpaper

•Wood Glue

•Hammer

1

10 Nails

Also Needed:

Finished example.

4

(Ver el dorso para instrucciones en español.)TSCA TITLE VI Compliant

2 Paddle Handles

2 Paddle Bases

1 Sticker Sheet

Step 1—Lay both side pieces down on the narrow edges. Add thin lines of glue to the top edges. Place the bottom piece on top. Make sure outside edges are even. Nail them together.

Step 2—Stand the project up. Add little glue to the top edge of the side pieces. Place one of the end pieces on top with the cutout edge on the bottom piece. Make sure all edges are even. Nail them together. Turn the project over and repeat to attach the other end piece.

Step 3—Add tiny dots of glue to one end of the paddle handles. Push the glued ends into the paddle bases to make paddles. If necessary, lightly tap with a hammer.

Attention: If you are painting the project, paint and wait to dry completely before adding the sticker.

Step 4—Add the sticker to the bottom piece.

2 Sides

2 Ends 1 Puck

1 Bottom