advanced instructions hdtv

36
51PP9910 55PP9910 HDTV HDTV Thank you for choosing Philips. Need help fast? Read your User Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance you may access our online help at www.p4c.philips.com or call 1-800-531-0039 while with your product. 3135 035 22232 User Manual ADVANCED INSTRUCTIONS 3/24/04

Upload: others

Post on 14-Mar-2022

4 views

Category:

Documents


0 download

TRANSCRIPT

51PP991055PP9910

HDTVHDTV

Thank you for choosing Philips.

Need help fast?

Read your User Manual first for quick tips thatmake using your Philips product more enjoyable.If you have read your instructions and still need

assistance you may access our online help atwww.p4c.philips.com

orcall 1-800-531-0039 while with your product.

3135 035 22232

User ManualADVANCED INSTRUCTIONS

3/24

/04

PANEL INDEX

PanelSequence

andPanel Index

COVERPANEL

1PANEL

2

PANEL

3

PANEL

4PANEL

5

PANEL

6PANEL

7

PANEL

8PANEL

9

PANEL

10PANEL

11PANEL

12PANEL

13PANEL

14

PANEL

19

PANEL

20PANEL

21

PANEL

22PANEL

23

PANEL

24PANEL

25

PANEL

26PANEL

27

PANEL

28PANEL

29

PANEL

30PANEL

31

PANEL

32PANEL

33

PANEL

34

PANEL

15

PANEL

16PANEL

17

PANEL

18

Side 1

Side 2

Advanced Remote FeaturesUsing the Guide . . . . . . . . . . . . . . .1Surf . . . . . . . . . . . . . . . . . . . . . . . .2DSURF . . . . . . . . . . . . . . . . . . . . .3PIP . . . . . . . . . . . . . . . . . . . . . . . . .4Picture Format . . . . . . . . . . . . . . .5Advanced Menu FeaturesPicture Controls . . . . . . . . . . . . . .6Convergance . . . . . . . . . . . . . . .7-8Sound Controls . . . . . . . . . . . . . . .9Bass Bosst . . . . . . . . . . . . . . . . . .10AVL . . . . . . . . . . . . . . . . . . . . . . .11Surround Sound . . . . . . . . . . . . . .12SAP, Alt Audio . . . . . . . . . . . . . .13

Audio Out, Speakers Dig Out . . . . . . . . . . . .14Intellitune, Smart Picture . . . . . . .15Sleep . . . . . . . . . . . . . . . . . . . . . .16Timer . . . . . . . . . . . . . . . . . . .17-19AutoLock . . . . . . . . . . . . . . . .20-23PIP . . . . . . . . . . . . . . . . . . . . . . . .24Closed Caption . . . . . . . . . . .25-26Picture Format . . . . . . . . . . . . . . .27Channel Edit . . . . . . . . . . . . . . . .28AutoChron . . . . . . . . . . . . . . .29-30Weak Digital Signal . . . . . . . . . . .31Channel and Volume Display . . . .32Emergency Alert . . . . . . . . . . . . .33Factory Channel Reset . . . . . . . . .34

SUBJECT Panel # SUBJECT Panel #

SURF

1

SURF12 > add? ADD?

Here's the Space for the programinfo which can run to four linesHere's the Space for the programinfo which can run to four lines

10:00 am - 11:00am

Program name80 - 1 PBS1DTV

HDTV

Mon 17 Oct

10:00

Here's the Space for the programinfo which can run to four linesHere's the Space for the programinfo which can run to four lines

10:00 am - 11:00am

Program name80 - 1 PBS1DTV

HDTV

Mon 17 Oct 10:15am 80-180-280-380-480-5

10:00 1:00

Here's the Space for the programinfo which can run to four linesHere's the Space for the programinfo which can run to four lines

10:00 am - 11:00am

Program name80 - 1 PBS1DTV

HDTV

Mon 17 Oct 10:15am 80-180-280-380-480-5

10:00 1:00

Channel and NameCurrent date and time

Program name

Program time

TIme Selector

AvailableSubchannels

Program information

Signal Type

Guide

ADVANCED REMOTE FEATURES

USING THE GUIDE

The guide can provide you with infor-mation about the current program

as well as upcoming programs. Thecontent and accuracy of the guide isentirely dependent on the broadcasteror cable company.

1 Press the GUIDE button toopen the Guide window. If thebroadcaster or cable companyis providing it, informationabout the current program andprograms throughout the dayare displayed.

2 Use the CURSOR LEFT orRIGHT button to select a time.The program name, time,inforamtion, as well as signaltype are displayed.

1

ADVANCED REMOTE FEATURES

USING SURF

After you set up a list of yourfavorite signal sources in the SURF

list, you can press the SURF button tosee the list and quickly tune to afavorite signal source. Place up to 10signal sources in the SURF list.

1 Once you are viewing thechannel you want to add tothe surf list, press the SURFbutton. The Surf list boxappears. The number of thecurrent channel is shown withADD? to the right. Press theCURSOR RIGHT button toadd the channel to the Surflist. The text should switchfrom “add?” to “delete?” Thetext gives the next availableaction, therefore, when it says“delete?” the channel has beenadded.

2 Press the NUMBER but-tons, CH(annel) +/– but-tons to select another signalsource to add to the Surf list.Press the SURF button andthen the CURSOR RIGHTbutton to add the channel tothe list.

Repeat this step, filling the listwith up to 10 favorite signalsources. NOTE: If you exceed10 channels a warning messagewill inform you to delete achannel before adding another.

3 To tune to a favorite signalsource from the list, pressthe SURF button. The Surflist box appears. Press theSURF button or the CURSORDOWN button or UP as manytimes as necessary to tune tothe channel.

SURF12 > delete? ADD?

1,2,3

1,2 2

SURF12 > add? ADD?

Channel is deleted.

Channel is added.

HELPFUL HINTS• To delete a signal source

from the list, press theSURF button. The Surf listbox appears. Press theSURF button or theCURSOR DOWN buttonor UP as many times asnecessary to select thesignal source to be delet-ed. Then press the CUR-SOR RIGHT button todelete the signal source.The screen will say“add?” when the channelhas been deleted.

2

ADVANCED REMOTE FEATURES

USING DSURF

DSURF locks the tuner into a “digi-tal only” mode. Like a “Caps

Lock” button on a computer keyboard,DSURF limits channel selection to digi-tal channels only.

1 Press DSURF.

2 Use Channel + or - to select achannel. Only digital channelsare available. A small icon,appears next to the channel toindicate DSURF is activated.

3 Press DSURF again to returnto normal channel selectionand the DSURF icon disappears

1,3

2

EVENING WORLD NEWSTONIGHT'S HEADLINES

EVENING WORLD NEWSTONIGHT'S HEADLINES

5.1 5.1WXYZ

(Digital)

5.1 5.1WXYZ

(Digital)

EVENING WORLD NEWSTONIGHT'S HEADLINES

EVENING WORLD NEWSTONIGHT'S HEADLINES

3

ADVANCED REMOTE FEATURES

USING PICTURE-IN-PICTURE (PIP)

The Picture-In-Picture (PIP) featureallows you to display a subscreen

within your main screen and watch twovideo sources at once. Because your sethas one tuner, you need to use a VCRas a second tuner for your PIP picture.Tune to your favorite show on the mainscreen while scanning other AV inputs inthe PIP window. See panel 24 to selectthe PIP source.

1 Press the PIP button toturn PIP on.

2 Press the PIP button a sec-ond time to make the PIP win-dow smaller.

3To select a video source towatch in the PIP window, see“Selecting a PIP Source” onpanel 24.

4 Press the PIP button a thirdtime to turn PIP off.

MOVING THE PIP SCREEN

Press the POS button. Each timeyou press this button, the PIP screenmoves to another corner of the mainscreen.

FREEZING THE PIP SCREEN

Press the FREEZE button. Thepicture in the PIP screen stands still.Stopping motion allows you to writedown onscreen phone numbers oraddresses.

SWITCHING THE MAIN AND PIPSCREENS

Press the SWAP button. The mainscreen and PIP screen change places.

POSITION

SWAP

FREEZE

Ski VacationsP.O. Box 55512

Anytown, USA 876541-800-555-1212

FREEZEButton

SWAPButton

POSITIONButton

124

4

ADVANCED REMOTE FEATURES

USING PICTURE FORMAT CONTROL

Your TV’s wide screen (16:9 aspect ratio)delivers a home-cinema experience not

possible with a conventional (4:3 aspectratio) set. High-definition (HD) programsoriginating in 16:9 format and otherwidescreen-format video sources appearmore lifelike, dramatic, and theatrical.Border bars are diminished or eliminated.Most anamorphic-DVD programs will fill thewide screen without border bars.

Selecting a Picture FormatUsing the Remote Control

Use your TV’s picture-format modeswith video sources you connect to theANTENNA, CABLE AV1, AV2, AV3,AV4, AV5, SIDE inputs on the TV. Whilewatching a video source—with noonscreen menu or display present—press the FORMAT button once to seethe currect mode. Press it again tochange to the next mode.

FORMATButton

Picture-format ModesNATIVE (16:9) is the default for yourDTV because HD programs are broad-cast in this format. Analog channels areexpanded horizontally. 4:3 shows an analog the picture in itsoriginal, conventional (4:3 aspect ratio)format. ZOOM expands, or zooms, the pictureboth vertically and horizontally, eliminat-ing or reducing the size of border bars.PANORAMIC stretches the outer por-tions of the picture horizontally.

To prevent uneven picture-tube aging,do not leave border bars or other sta-tionary images on screen for extendedperiods of time.

WARNING

NATIVE (16:9)

4:3

ZOOM

PANORAMIC

5

ADJUSTING PICTURE CONTROLS

To adjust your TV picture controls,select a channel and follow these

steps. See descriptions of the picture-adjustment options below.

1 Press the MENU button onthe remote control to show theonscreen menu.

2 Press the CURSOR RIGHTbutton. BRIGHTNESS will behighlighted and an adjustment barwill be shown to the right.

3 Press the CURSOR RIGHTbutton or LEFT to adjust theBRIGHTNESS level of the pic-ture. Or press the CURSORDOWN button to select anoth-er picture control to adjust.

4 Press the INFO/EXIT buttonto exit the menu.

PICTURESOUNDFEATURESINSTALL

BRIGHTNESSPICTURESHARPNESSCOLORTINT

BRIGHTNESSPICTURESHARPNESSCOLORTINT

PICTURE

BRIGHTNESSPICTURESHARPNESSCOLORTINT

PICTURE

BRIGHTNESSPICTURESHARPNESSCOLORTINT

PICTURE

BRIGHTNESSPICTURESHARPNESSCOLORTINT

PICTURE

BRIGHTNESSPICTURESHARPNESSCOLORTINT

PICTURE

PICTURESHARPNESSCOLORTINTCOLOR TEMP NORMAL

PICTURE

42,3

1

ADVANCED MENU FEATURES6

Picture-adjustment OptionsRemember, when the bar scale is cen-tered , the control settingsare at mid-range levels. Picture adjust-ments are described as follows:BRIGHTNESS raises and lowers theblack level of the picture.PICTURE raises or lowers the intensityof the picture (also called contrast).SHARPNESS improves the detail in the picture.COLOR adds or eliminates color.TINT adjusts the picture to obtain natu-ral skin tones.COLOR TEMP offers NORMAL,COOL, or WARM picture preferences.

NORMAL keeps whites white.WARM makes whites less blue.COOL makes whites more blue.

ADVANCED MENU FEATURES

ADJUSTING CONVERGENCE: CONVERGE RED/BLUE

Your projection TV has three color pro-jection tubes: one for red, one for

green, and one for blue. When mixed inproper proportion, the beams of lightcoming from the tubes can produce anycolor. To create a clear picture, however,these color beams must be preciselyaligned. This alignment is called conver-gence.NOTE: Allow the TV to warm up for 20minutes before adjusting convergence.

1 Press the MENU button toshow the onscreen menu. Pressthe CURSOR RIGHT button toenter the PICTURE submenu.Then press the CURSORDOWN button repeatedly untilMANUAL CONVERGE is high-lighted.

2 Press the CURSOR RIGHTbutton to enter the MANUALCONVERGE submenu. If youwant to adjust the RedConvergence, press the CUR-SOR RIGHT button to enter theadjust mode. To adjust the BlueConvergence, press the CUR-SOR DOWN button to high-light CONVERGE BLUE, thenpress the CURSOR RIGHT but-ton to enter adjust mode.

3 In adjust mode, press theCURSOR RIGHT, LEFT,UP, or DOWN button toadjust the cross hair until thecolor outline around it is gone.(The adjustment is automaticallysaved in the TV’s memory.) Toreturn to the MANUAL CON-VERGE menu, press the MENUbutton. To exit the onscreendisplay, press the INFO/EXITbutton.

CONVERGE REDCONVERGE BLUEMULTIPOINT REDMULTIPOINT BLUESAVE MULTIPOINT

PICTURE MANUAL CONVERGE

Converge Red

Converge Red1

2,3

neercSecnaraeppa noitcA

suoiraVsegami

tuohguorhteritneeht

evaherutcip.seniltuoder

ehttsujdAEGREVNOC.lortnocDERderynafinehT

,niamerseniltuoehttsujda

TNIOPITLUM.lortnocDER

suoiraVsegaim

tuohguorhteritneeht

evaherutcip.seniltuoeulb

ehttsujdAEGREVNOC

.lortnocEULBeulbynafinehT,niamerseniltuo

ehttsujdaTNIOPITLUM.lortnocEULB

Determining WhichManual Converge

Control to Use

7

ADVANCED MENU FEATURES

ADJUSTING CONVERGENCE: MULTIPOINT RED/BLUE

The Multipoint Red/Blue Convergencecontrols allow you to adjust picture con-

vergence at specific points on the TVscreen.

1 Press the MENU button toshow the onscreen menu. Pressthe CURSOR RIGHT button toenter the PICTURE submenu.Then press the CURSORDOWN button repeatedly untilMANUAL CONVERGE is high-lighted.

2 Press the CURSOR RIGHTbutton to enter the MANUALCONVERGE submenu. Pressthe CURSOR DOWN buttonrepeatedly until MULTIPOINTRED or MULTIPOINT BLUE ishighlighted. Then press theCURSOR LEFT or RIGHT but-ton to enter Navigate mode.

3 Press the CURSOR LEFT,RIGHT, UP, or DOWN but-ton to move to a cross hairthat has a color outline. Thenpress the INFO/EXIT button toenter adjust mode.

4 Press the CURSOR LEFT,RIGHT, UP, or DOWN but-ton to adjust the cross hairuntil the color outline isgone.Then press the INFO/EXIT button to return to NAVIGATEmode. Repeat steps 3 and 4until all misaligned cross hairshave been adjusted.

5 For your adjustments to bestored in the TV’s memory,you must activate SAVEMULTIPOINT. To save your multipointadjustments, press the MENUbutton to return to the MANU-AL CONVERGE menu. Press the

CONVERGE REDCONVERGE BLUEMULTIPOINT REDMULTIPOINT BLUESAVE MULTIPOINT

PICTURE MANUAL CONVERGE

��

CONVERGE REDCONVERGE BLUEMULTIPOINT REDMULTIPOINT BLUESAVE MULTIPOINT

PICTURE MANUAL CONVERGE

to Navigate Exit to Adjust

MULTIPOINT REDMULTIPOINT BLUESAVE MULTIPOINTUNDO MULTIPOINTRESTORE FACTORY

PICTURE MANUAL CONVERGE

1,5

2,3

63,4

CURSOR DOWN button repeat-edly until SAVE MULTIPOINT ishighlighted. Then press the CUR-SOR LEFT or RIGHT button tostore your adjustments in the TV’smemory.To undo the multipoint adjust-ments you just made, highlightUNDO MULTIPOINT and pressthe CURSOR LEFT or RIGHT but-ton.To restore the TV’s conver-gence to factory settings, high-light RESTORE FACTORY andpress the CURSOR LEFT orRIGHT button.

6 Press the INFO/EXIT buttonto exit the menu.

8

ADVANCED MENU FEATURES

Smart Sound allows you to choosepreset sound settings.

1 Press the MENU button onthe remote control to showthe onscreen menu.

2 Press the CURSORDOWN button once tohighlight SOUND.

3 Press the CURSOR RIGHTbutton to enter the SOUNDsubmenu.

4 Press the CURSOR RIGHTbutton to highlight SMARTSOUND.

5 Press the CURSOR RIGHTbutton to choose personal(based on the Settings below),voice, music, theater.

6 Press the INFO/EXIT but-ton to exit the menu.

Besides the normal volume level con-trol, your TV also has individual

sound-adjustment controls. You canuse TREBLE (high frequency), BASS(low frequency), and Speaker BAL-ANCE to further adjust the sound play-back of TV programs.

1 Press the MENU button onthe remote control to showthe onscreen menu.

2 Press the CURSORDOWN button once tohighlight SOUND.

3 Press the CURSOR RIGHTbutton to enter the SOUNDsubmenu.

ADJUSTING THE SOUND CONTROLS, SMART SOUND

TREBLEBASS 30BALANCEAVLINCR . SURROUND

SOUND

TREBLEBASSBALANCE 0AVLINCR . SURROUND

SOUND

PICTURESOUNDFEATURESINSTALL

SMART SOUNDTREBLEBASSBALANCEAVL

TREBLE 30BASSBALANCEAVLINCR . SURROUND

SOUND

SMART SOUND PERSONALTREBLE 30BASSBALANCEAVL

SOUND

65

2,24

3,34,45

1,1

4 To adjust the TREBLE levelof the television’s sound,press the CURSOR RIGHTbutton or LEFT. To adjustanother sound control,press the CURSORDOWN button until the con-trol (BASS or BALANCE) ishighlighted. Then press the CURSOR RIGHT button orLEFT to adjust the selectedcontrol.

5 Press the INFO/EXIT but-ton to exit the menu.

9

ADVANCED MENU FEATURES

USING BASS BOOST CONTROL

The BASS BOOST control allows youto increase the low-frequency range

of the TV’s sound. This creates a deep-er, fuller sound. Follow these steps toturn BASS BOOST ON.

1 Press MENU button on theremote control to show theonscreen menu.

2 Press the CURSORDOWN button once to high-light SOUND.

3 Press the CURSOR RIGHTbutton to enter the SOUNDsubmenu.

4 Press the CURSORDOWN button repeatedlyuntil BASS BOOST is highlight-ed.

5 Press the CURSOR RIGHTor LEFT button to turnBASS BOOST ON or OFF.

6 Press the INFO/EXIT but-ton to exit the menu.

SOUND

STEREOSAPAUDIO OUTSPEAKERSBASS BOOST ON

BASS BOOST OFF

PICTURESOUNDFEATURESINSTALL

TREBLEBASSBALANCEAVLINCR . SURROUND

TREBLE 30BASSBALANCEAVLINCR . SURROUND

SOUND

OR

1

3,52,4

6

10

ADVANCED MENU FEATURES

You may have noticed the peaks andvalleys of sound that occur between

program changes or at commercialbreaks. The volume levels often varyconsiderably. By turning on the AVL(Audio Volume Leveler) control, you canmake your TV produce a more consis-tent volume level. Follow these steps toturn the AVL control on.

1 Press the MENU button onthe remote control to showthe onscreen menu.

2 Press the CURSORDOWN button once to high-light SOUND.

3 Press the CURSOR RIGHTbutton to enter the SOUNDsubmenu.

4 Press the CURSORDOWN button repeatedlyuntil AVL is highlighted. Thenpress the CURSOR RIGHTbutton or LEFT to turn AVLON or OFF.

5 Press the INFO/EXIT but-ton to exit the menu.

USING THE AVL (AUDIO VOLUME LEVELER) CONTROL

SOUND

TREBLEBASSBALANCEAVL OFFINCR . SURROUND

AVL ON

PICTURESOUNDFEATURESINSTALL

TREBLEBASSBALANCEAVLINCR . SURROUND

TREBLE 30BASSBALANCEAVLINCR . SURROUND

SOUND

OR

1

32,4

5

11

• You may notice a differencebetween the volume for ana-log and digital channels. Thisis normal, but is not some-thing the AVL control can fullyaddress

HELPFUL HINT

ADVANCED MENU FEATURES

SELECTING THE SURROUND SOUND MODE

Based on the signal being received,you can select various surround-

sound modes: MONO, SPATIAL,STEREO, INCR. SURROUND, orDOLBY* VIRTUAL (Virtual DolbySurround). See descriptions below.

1 Press the MENU button onthe remote control to showthe onscreen menu.

2 Press the CURSORDOWN button once to high-light SOUND.

3 Press the CURSOR RIGHTbutton to enter the SOUNDsubmenu.

4 Press the CURSORDOWN button repeatedlyuntil INCR. SURROUND ishighlighted. Then press theCURSOR RIGHT or LEFT but-ton to select the Surroundmode. (See the box to the leftfor details.)

5 Press the INFO/EXIT but-ton to exit the menu.

FORMAT EXPAND 4:3

When signals are being broad-cast in mono (nonstereo):

INCR . SURROUND MONO

INCR . SURROUND SPATIAL

OR

PICTURESOUNDFEATURESINSTALL

TREBLEBASSBALANCEAVLINCR . SURROUND

TREBLE 30BASSBALANCEAVLINCR . SURROUND

SOUND

SOUND

TREBLEBASSBALANCEAVL OFFINCR . SURROUND STEREO

INCR . SURROUND DOLBY VIRTUAL

OR

OR

INCR . SURROUND INCR . SURROUND

1

32,4

5

Surround-sound ModesIn stereo: select STEREO,INCR. SURROUND, or DOLBYVIRTUAL.INCR. (Incredible) SURROUNDenhances stereo programs by mak-ing the sound broader and fuller.

DOLBY VIRTUAL (with DolbySurround encoded signals) cre-ates a virtualized surround-soundexperience from two speakers.

In mono: select MONO or SPA-TIAL.SPATIAL enables you to add asurround effect to mono programs.

Manufactured under licensefrom Dolby Laboratories.“Dolby” and the double-Dsymbol are trademarks ofDolby Laboratories.

12

ADVANCED MENU FEATURES

USING SAP, ALT AUDIO PROGRAM

1 Press the MENU button onthe remote control to showthe onscreen menu.

2 Press the CURSORDOWN button once to high-light SOUND.

3 Press the CURSOR RIGHTbutton to enter the SOUNDsubmenu.

4 Press the CURSORDOWN button repeatedlyuntil the SAP control is high-lighted.

5 Press the CURSOR RIGHTor LEFT button to selectON or OFF. When ON hasbeen selected, the televisionwill Immediately begin repro-ducing the secondary audio.

6 Press the INFO/EXIT but-ton to exit the menu.

PICTURESOUNDFEATURESINSTALL

TREBLEBASSBALANCEAVLINCR . SURROUND TREBLE 30

BASSBALANCEAVLINCR . SURROUND

SOUND

SOUND

BLANCEAVLINCR . SURROUNDSTEREOSAP OFF

1

3,52,4

6

Audio Program

English

Spanish

Digital Audio

SAP

SAP, or Second Audio Program, is anadditional part of the stereo broad-

cast system. Sent as a third audio chan-nel, SAP can be heard apart from thecurrent TV program sound. TV stationsare free to use SAP for any number ofpurposes, such as the broadcast of asecond language or other audio infor-mation.

If an SAP signal is not present with aselected program, the SAP option can-not be selected.

Alt Audio Program is the digital equiva-lent of SAP. It functions in nearly thesame way.

13

ADVANCED MENU FEATURES

If you have connected the TV’sAUDIO OUTPUT jacks to the AUDIO

INPUT jacks on an external audio sys-tem, you can turn off the TV Speakers.Once the TV Speakers are off, you canadjust the Audio Out to either constantor variable output.

1 Press the MENU button onthe remote control to showthe onscreen menu.

2 Press the CURSORDOWN button once to high-light SOUND.

3 Press the CURSOR RIGHTbutton to enter the SOUNDsubmenu.

4 Press the CURSORDOWN button repeatedlyuntil AUDIO OUT is highlight-ed. Then press CURSORRIGHT or LEFT Button toselect Fixed or Variable.

5 Press the MENU button togo back and CURSORDOWN button to selectSPEAKERS. Then press CUR-SOR RIGHT or LEFTbutton toselect ON or OFF.

6 Press the INFO/EXIT but-ton to exit the menu.

ADJUSTING AUDIO OUT, DIG OUT, SPEAKERS

Manufactured under license fromDolby Laboratories. “Dolby” andthe double-D symbol are trade-marks of Dolby Laboratories.

If you have digital audio equipmentconnected to the TV, select the type

of digital output appropriate for yourdevice.

1 From the Sound submenupress the CURSORDOWN button to select DIGAUDIO OUT.

2 Press the CURSOR RIGHTor LEFT button to selectPCM or DOLBY DIGITAL.

3 Press the INFO/EXIT but-ton to exit the menu.

SOUND

TREBLEBASSBALANCEAVL OFFINCR . SURROUND

AVL ON

PICTURESOUNDFEATURESINSTALL

TREBLEBASSBALANCEAVLINCR . SURROUND

TREBLE 30BASSBALANCEAVLINCR . SURROUND

SOUND

OR

1

32,4

5

• DOLBY DIGITAL can only beselected as a DIG AUDIOOUT when digital signals arebroadcasting in Dolby Digital.

HELPFUL HINT

14

ADVANCED MENU FEATURES

USING INTELLITUNE, SMART PICTURE

Because broadcasters and cable compa-nies are transitioning to Digital TV they

may broadcast digital channels at certaintimes or they may reorganize channelswithout notice. To make sure you do notmiss a channel, Philips has developedIntellitune. When the TV is OFF (standbymode) it will search for previously unpro-grammed channels and add them to thechannel list. It does this every three hours.

1 Press the MENU button onthe remote control to showthe onscreen menu.

2 Press the CURSORDOWN button twice tohighlight FEATURES.

3 Press the CURSOR RIGHTbutton to enter the FEA-TURES submenu.

4 Press the CURSOR RIGHTbutton to turn Intellitune ONor OFF.

5Press the INFO/EXIT buttonto exit the menu.

PICTURESOUNDFEATURESINSTALL

INTELLITUNESMART PICTURESLEEPTIMERAuto Lock

ON

FEATURES

11

22

54

3,42,3

INTELLITUNESMART PICTURESLEEPTIMERAuto Lock

DAY TIME

FEATURES

INTELLITUNESMART PICTURESLEEPTIMERAuto Lock

Smart Picture allows you to choose apreset picture setting for each

Antenna, Cable and AV input.

1 Press the MENU button onthe remote control to showthe onscreen menu.

2 Press the CURSOR BUT-TONS to navigate toFEATURES then SMARTPICTURE.

3 Press the CURSOR RIGHTbutton to select Personal(based on your Picture menusettings), Day Time,Games/Sports, Noisy Signal, orNight Time.

4 Press the INFO/EXIT buttonto exit the menu.

Personal

Day Time

Games/Sports

Noisy Signal

Night Time

Based on Picture settings

Increased brightness

Saturated Colors

Reduced sharpness

Decreased brightness

SETTING PRIMARY DIFFERENCE

15

ADVANCED MENU FEATURES

SLEEP TIMER

The Sleeptimer feature allows you toset a timer to automatically switch

the TV off after a period of time thatyou choose—15, 30, 45, 60, 90, 120,180, or 240 minutes.

1 Press the MENU button onthe remote control to showthe onscreen menu.

2 Press the CURSORBUTTONS to navigate toFEATURES then SLEEP.

3 Press the CURSOR RIGHTbutton to set the sleep timer.

4 Press the INFO/EXIT buttonto exit the menu.

PICTURESOUNDFEATURESINSTALL

INTELLITUNESMART PICTURESLEEPTIMERAuto Lock

15

FEATURES

1

2

4

3

INTELLITUNESMART PICTURESLEEPTIMERAuto Lock

• Press the INFO BUTTONtwice to see the status of theSleep timer.

HELPFUL HINT

16

ADVANCED MENU FEATURES

SETTING THE TIMER START/STOP TIME

You can set the Timer to switch to aselected channel at a specific time

while you are watching another channel,or when the TV is in standby mode. Youcan also set the TV to turn off at sometime after the TV switches channels.

1 Press the MENU button onthe remote control to showthe onscreen menu.

2 Press the CURSORDOWN button twice tohighlight FEATURES.

3 Press the CURSOR RIGHTbutton to enter the FEA-TURES submenu. Then pressthe CUROSR DOWN buttonuntil TIMER is highlighted.

4 Press the CURSORRIGHT button again. Thenpress the CURSOR DOWNbutton once to highlight theSTART TIME control.

5 Press the CURSOR RIGHTbutton to highlight the timeindicator area.

6 Press the NUMBER but-tons to enter the correcttime. If you make a mistakeentering the time, use theCURSOR LEFT or RIGHT but-ton to move among the timeinput slots to make correc-tions.

NOTE: You can also usethe CURSOR BUTTON UPor DOWN to cycle throughdigits to input the time.

7 Press the CURSOR UP orDOWN button to select AMor PM.

PICTURESOUNDFEATURESINSTALL

INTELLITUNESMART PICTURESLEEPTIMERAuto Lock

TIMESTART TIMESTOP TIMECHANNELACTIVATE

FEATURES

TIMERFEATURES

TIME 8:06 PMSTART TIMESTOP TIMECHANNELACTIVATE

TIMERFEATURES

TIMESTART TIME _ _:_ _ STOP TIMECHANNELACTIVATE

TIMERFEATURES

TIMESTART TIMESTOP TIME _ _:_ _CHANNELACTIVATE

1

2

6

8

79

3,4,5

INTELLITUNESMART PICTURESLEEPTIMERAuto Lock

8 Press the CURSOR LEFTbutton repeatedly until STARTTIME is highlighted. Then pressthe CURSOR DOWN buttonto highlight STOP TIME. If youwant the TV to switch off atsome time after the changing ofchannels, follow steps 5–7 aboveto set the STOP TIME.

9 Press the INFO/EXIT but-ton to exit the menu.

See the next two panels for instruc-tions on selecting the Timer’s channeland activating the timer.

17

ADVANCED MENU FEATURES

SELECTING THE TIMER CHANNEL

Follow these steps to select the chan-nel to which the Timer will switch

the TV.

1 Press the MENU button onthe remote control to showthe onscreen menu.

2 Press the CURSORDOWN button twice tohighlight FEATURES.

3 Press the CURSOR RIGHTbutton to enter the FEA-TURES submenu. Then pressthe CUROSR DOWN buttonuntil TIMER is highlighted.

4 Press the CURSOR RIGHTbutton. Then press the CUR-SOR DOWN button repeatedlyuntil the CHANNEL control ishighlighted.

5 Press the NUMBER but-tons to enter the desired start-up channel. Or press the CUR-SOR RIGHT button repeatedlyto enter the start-up channelyou want.

6 Press the INFO/EXIT but-ton to exit the menu.

NOTE: Before the Timer willwork, you must activate it. See thenext panel.

PICTURESOUNDFEATURESINSTALL

TIMERAutoLockPIPCLOSED CAPFORMAT

TIMERAutoLockPIPCLOSED CAPFORMAT

TIMESTART TIMESTOP TIMECHANNELACTIVATE

FEATURES

TIMERFEATURES

TIME 8:06 PMSTART TIMESTOP TIMECHANNELACTIVATE

TIMERFEATURES

TIMESTART TIME STOP TIMECHANNEL 5ACTIVATE

1

3,42

5

6

18

ADVANCED MENU FEATURES

SETTING THE TIMER ACTIVATE CONTROL

After you have set the TIME, START TIME, STOP TIME, and CHAN-

NEL, you must activate the Timer for itto operate. Your options are to set theTimer to work ONCE or DAILY. SetACTIVATE to OFF if you don’t want touse the Timer.

1 Press the MENU button onthe remote control to showthe onscreen menu.

2 Press the CURSORDOWN button twice tohighlight FEATURES.

3 Press the CURSOR RIGHTbutton to enter the FEA-TURES submenu.

4 Press the CURSOR RIGHTbutton again. Then press theCURSOR DOWN buttonrepeatedly until the ACTIVATEcontrol is highlighted.

5 Press the CURSOR RIGHTbutton to cycle through theoptions and make your selec-tion. The options are ONCE,DAILY, or OFF.

6 Press the INFO/EXIT but-ton to exit the menu.

PICTURESOUNDFEATURESINSTALL

TIMERAutoLockPIPCLOSED CAPFORMAT

TIMERAutoLockPIPCLOSED CAPFORMAT

TIMESTART TIMESTOP TIMECHANNELACTIVATE

FEATURES

TIMERFEATURES

TIME 8:06 PMSTART TIMESTOP TIMECHANNELACTIVATE

TIMERFEATURES

TIMESTART TIMESTOP TIMECHANNELACTIVATE ONCE

ACTIVATE DAILY

ACTIVATE OFF

OR

OR

1

2 3,4,5

6

• Changing the channel oradjusting the volume duringthe last minute of a Timer set-ting will cancel it and the TVwill not shut off..

• Thirty seconds before the setchanges to the channel youset, an announcement appearson screen.

HELPFUL HINT

CHANGING TOCHANNEL 5 IN 29 SEC

19

ADVANCED MENU FEATURES

UNDERSTANDING AUTOLOCK CONTROLS

The AutoLock™ feature is an integratedcircuit that receives and processes data

sent by broadcasters, or other programproviders, that contain program content advi-sories. When programmed by the viewer, aTV with AutoLock™ can respond to the con-tent advisories and block program contentthat may be found objectionable (such asoffensive language, violence, sexual situations,etc.). This is a great feature to censor thetype of viewing children may watch.

AutoLock™ offers various BLOCK-ING controls from which tochoose:Access Code - An Access Code mustbe set to prevent children fromunblocking questionable or censoredprogramming set by their parents.Channel Block - After an access codehas been programmed, you can blockindividual channels.Block All - Allows you to block ALLchannels at one time.Movie Ratings - Certain blockingoptions exist which will block program-ming based on ratings patterned by theMotion Pictures Association of America.TV Ratings - Just like the MovieRatings, programs can be blocked fromviewing using standard TV ratings set byTV broadcasters.MOVIE RATINGSG: General Audience - All agesadmitted. Most parents would find thisprogram suitable for all ages.PG: Parental Guidance Suggested -This programming contains material thatparents may find unsuitable for youngerchildren.PG-13: Parents Strongly Cautioned -This programming contains material thatparents may find unsuitable for childrenunder the age of 13.

MOVIE RATINGS ContinuedR: Restricted - This is programmingspecifically designed for adults. Anyoneunder the age of 17 should only view thisprogramming with an accompanying par-ent or adult guardian.NC-17: No one under the age of 17will be admitted. - This type of pro-gramming should be viewed by adults only.X: Adults Only - This type of program-ming contains one or more of the follow-ing: very graphic violence, very graphic andexplicit or indecent sexual acts, verycoarse and intensely suggestive language.

TV RATINGSTV-Y -- Designed for a very young audi-ence, including children ages 2-6.TV-Y7 -- It may be appropriate for chil-dren age 7 and above who have acquiredthe development skills needed to distin-guish between make-believe and reality.TV-G -- Suitable for most audiences, thistype of programming contains little or noviolence, no strong language, and little orno sexual dialogue or situations.TV-PG -- This program contains materialthat parents may find unsuitable foryounger children. Could contain Moderateviolence (V), some sexual situations (S),infrequent coarse language (L), or somesuggestive dialogue (D).TV-14 -- This program contains somematerial that many parents would findunsuitable for children under 14 years ofage. This type of programming containsone or more of the following: intense vio-lence (V), intense sexual situations (S),strong coarse language (L), or intenselysuggestive dialogue (D).TV-MA -- This program is specificallydesigned to be viewed by adults andtherefore may be unsuitable for childrenunder 17. This type of programming con-tains one or more of the following: graphicviolence (V), explicit sexual situations (S),or crude indecent language (L).

20

ADVANCED MENU FEATURES

SETTING UP THE AUTOLOCK™ ACCESS CODE

Your AutoLock™ access code allowsyou to enter the AutoLock™ sub-

menus to set up or turn off blocking.Your access code is also the “key” thatunlocks programs or channels that arebeing blocked by AutoLock™.

1 Press the MENU button onthe remote control to showthe onscreen menu.

2 Press the CURSORDOWN button twice tohighlight FEATURES.

3 Press the CURSOR RIGHTbutton. Then press the CUR-SOR DOWN button once tohighlight the AutoLock control.

4 Press the CURSOR RIGHTbutton to activate theAutoLock menu.

5 Press 0,0,0,0 on the remotecontrol. The AutoLock menuwill appear.

6 Press the CURSORDOWN button threetimes, then the CURSORRIGHT button to open theNew Code screen.

7 Enter your new four-digitcode twice.

8 Press the INFO/EXIT but-ton exit the menu.

9 Use these steps to resetyour code if you lose it.Instead of 0000 in step 5,use 0711. This is the resetcode.

PICTURESOUNDFEATURESINSTALL

TIMERAutoLockPIPCLOSED CAPFORMAT

TIMERAutoLockPIP SOURCECLOSED CAPCAP OPTIONS

TIMESTART TIMESTOP TIMECHANNELACTIVATE

FEATURES

TIMERAutoLockPIPCLOSED CAPCAP OPTIONS

FEATURES

1

2,6

3,4

8

Autolock

Enter access code:

Autolock

Set blocking Block channelBlock by ratingSetup Code ˙

¸

Autolock

Enter new access code:

Please re-enter new access code:

* * * *

***

5,7

• If you discover that your accesscode has been changed, you canassume that blocked channels mayhave been viewed.

• For the AutoLock to work with digitalchannels, the AutoChron must be set.See panel 29.

HELPFUL HINTS

Record your personal code below:

21

ADVANCED MENU FEATURES

You can use AutoLock to block pro-grams based on TV ratings, movie

ratings, as well as programs whichhave no rating or are unrated.

1 Press the MENU button onthe remote control to showthe onscreen menu. Then usethe cursor buttons to navigateto AUTOLOCK in theFEATURES menu.

2 Enter your four-digitACCESS CODE.

3 Press the CURSORDOWN button to selectBlock Channel or Block by rat-ing,

4 Block Channela)Press the CURSORRIGHT button to enter theBLOCK CHANNEL submenu.

b)Press the CURSOR UPor DOWN button to selecta channel to block. Press OKto change unlocked to locked,or locked to unlocked.

5 Block by Rating

a)Press the CURSORDOWN button, then theCURSOR RIGHT buttonto enter the BLOCK BY RAT-ING submenu.

b)Press the CURSORButtons to select a rating orsubrating to block. Press OKto change unlocked to locked,or locked to unlocked.

6 Press the INFO/EXIT but-ton to exit the menu.

USING THE AUTOLOCK TO BLOCK PROGRAMS

PICTURESOUNDFEATURESINSTALL

TIMERAutoLockPIPCLOSED CAPFORMAT

TIMERAutoLockPIPCLOSED CAPFORMAT

FEATURES

ACCESS CODE- - - -

TIMERAutoLockPIPCLOSED CAPFORMAT

FEATURES

ACCESS CODEX X X X1

2

3,4,5

6

Movie Ratings

GPGPG-13RNC-17X

NOT RATED

TV Ratings All FV D L S VTV-Y ̋TV-Y7TV-GTV-PGTV-14TV-MA ¸MISSING RATING

Autolock

Set blocking Block channel ˙ SelectBlock by ratingSetup Code

¸

Channel Blocking ˚15 DTV16 DTV 17 DTV18 DTV19 DTV20 DTV21 DTV ¸

Block Channel

Block by Rating

22

ADVANCED MENU FEATURES

TURNING THE AUTOLOCK BLOCKING ON OR OFF

The SET BLOCKING control can bethought of as the “master switch”

for AutoLock™. Use it to turn ON orOFF all of the settings (based on rat-ings). This control does not affect chan-nel blocks.

1 Press the MENU button onthe remote control to showthe onscreen menu.

2 Press the CURSORDOWN button twice tohighlight FEATURES.

3 Press the CURSOR RIGHTbutton. Then press the CUR-SOR DOWN button until theAutoLock control highlighted.

4 Press the CURSOR RIGHTbutton again to highlightACCESS CODE.

5 Enter your four-digitACCESS CODE.

6 Press the CURSOR RIGHTbutton to turn BLOCKINGON or OFF.

7 Press the INFO/EXIT but-ton to exit the menu.

PICTURESOUNDFEATURESINSTALL

TIMERAutoLockPIPCLOSED CAPFORMAT

TIMERAutoLockPIPCLOSED CAPFORMAT

FEATURES

ACCESS CODE- - - -

TIMERAutoLockPIPCLOSED CAPFORMAT

FEATURES

ACCESS CODEX X X X1

2 3,4,6

5

7

Autolock

Set blocking ˙ OffBlock channelBlock by ratingSetup Code

¸

23

ADVANCED MENU FEATURES

ADJUSTING PIP SOURCE

Before using the PIP you need toselect a source for it to display.

1 Press the MENU buttonon the remote control toshow the onscreen menu.

2 Press the CURSORDOWN button twice tohighlight FEATURES.

3 Press the CURSORRIGHT button to enter theFEATURES submenu.

4 Press the CURSORDOWN button repeatedlyuntil the PIP SOURCE controlis highlighted.

5 Press the CURSORRIGHT button to enter thePIP SOURCE submenu. Thenpress the CURSOR UP orDOWN button to select thePIP SOURCE.

6 Press the INFO/EXIT but-ton to exit the menu.

PICTURESOUNDFEATURESINSTALL

FEATURES

FEATURES

AV 5AV 4av 3AV 2AV 1

1

23,5

6

INTELLITUNESMART PICTURESLEEPTIMERAuto Lock

SMART PICTURESLEEPTIMERAuto LockPIP SOURCE

SMART PICTURESLEEPTIMERAuto LockPIP SOURCE

24

ADVANCED MENU FEATURES

USING CLOSED CAPTIONING

Closed Captioning (CC) allows you toread the voice content of television

programs on the TV screen. ClosedCaptioning is only available when thebroadcaster supplies it. Even whenthe broadcaster supports ClosedCaptioning, it will not be available dur-ing all programs (most commercialsare not closed captioned).

1 Press the MENU button onthe remote control to showthe onscreen menu.

2 Press the CURSORDOWN button twice tohighlight FEATURES.

3 Press the CURSOR RIGHTbutton to enter the FEA-TURES submenu.

4 Press the CURSORDOWN button repeatedlyuntil the Closed Caption con-trol is highlighted.

5 Press the CURSOR RIGHTbutton. The CLOSED CAP-TION menu appears.

6 Press the CURSOR UP orDOWN button to select aCAPTION MODE.Select the Closed Caption set-ting:• Off• Always On• On when muted

NOTE: The “On WhenMuted” option turns theClosed Captioning on whenev-er the MUTE button on theremote control is pushed.

PICTURESOUNDFEATURESINSTALL

TIMERAutoLockPIPCLOSED CAPFORMAT

TIMERAutoLockPIPCLOSED CAPFORMAT

TIMESTART TIMESTOP TIMECHANNELACTIVATE

FEATURES

FEATURES

TIMERAutoLockPIPCLOSED CAPFORMAT

16

2,4 3,5

MUTEButton

Closed caption services-AnalogDisplay Services ˚Off CC1Always On ˙ CC2On when muted CC3

CC4TXT1TXT2

¸

25

7 Press the CURSORBUTTONS to select theClosed Caption service.

8 Press the INFO/EXITbutton to exit the menu.

USING DIGITAL CAPTIONING

Closed Captioning (CC) allows you toread the voice content of television

programs on the TV screen. ClosedCaptioning is only available when thebroadcaster supplies it. Even when thebroadcaster supports ClosedCaptioning, it will not be available dur-ing all programs (most commercialsare not closed captioned).

1 Press the MENU button onthe remote control to showthe onscreen menu.

2 Press the CURSOR BUT-TONS to navigate toFEATURES, then CLOSEDCAPTION.

3 Press the CURSOR RIGHTbutton. The CLOSED CAP-TION menu appears. Selectthe caption mode and captionservice you would like.

4 Press the MENU Button toback up and select CAPTIONOPTIONS. To personalizeyour captions Press the CursorRight button to turn theoptions on.

5 In the FEATURES MENU,the Caption options arelisted below CAPTIONOPTIONS after it has beenturned on.The options are CAPTIONSIZE, CAPTION STYLE, CAP-TION COLOR, and CCBACKGROUND. Use theCursor Buttons to make yourselections and follow the on-screen instructions.

6 Press the INFO/EXIT but-ton to exit the menu.

PICTURESOUNDFEATURESINSTALL

TIMERAutoLockPIPCLOSED CAPFORMAT

TIMERAutoLockPIPCLOSED CAPFORMAT

TIMESTART TIMESTOP TIMECHANNELACTIVATE

FEATURES

FEATURES

TIMERAutoLockPIP SOURCECLOSED CAPCAPTION OPTIONS

FEATURES

TIMERAutoLockPIP SOURCECLOSED CAPCAPTION OPTIONS

1,46

2 3,5Closed caption services-DIGITAL

Display Services ˚Off CC1Always On ˙ CC2On when muted CC3

CC4TXT1TXT2

¸

FEATURES

CAPTION OPTIONSCAPTION SIZECAPTION STYLECAPTION COLORCAPTION BACKGROUND

ADVANCED MENU FEATURES26

HELPFUL HINTS• The Digital Captioning

options are only availableon a digital channel carry-ing the captioning informa-tion.

USING THE PICTURE-FORMAT CONTROL

You can also use the onscreen menuto access the Picture Format control.

1 Press the MENU buttonon the remote control toshow the onscreen menu.

2 Press the CURSORBUTTONS to navigate toFEATURES, then SCREENFORMAT.

3 Press the CURSORRIGHT button. Thenpress the CURSOR RIGHTor LEFT buttons to selectthe PICTURE FORMAT.

4 Press the INFO/EXITbutton to exit the menu.

PICTURESOUNDFEATURESINSTALL

TIMERAutoLockPIPCLOSED CAPFORMAT

FORMAT ZOOM

OR

FORMAT PANORAMA

OR

FORMAT NATIVE

4

2 3

1

FEATURES

TIMERAutoLockPIPCLOSED CAPFORMAT 4:3

OR

ADVANCED MENU FEATURES27

HELPFUL HINTS

• See panel 5 “USING

PICTURE FORMAT CONTROL”for more information ofScreen Formats.

ADVANCED MENU FEATURES

CHANNEL EDIT

T his feature allows you to edit or skipchannels from the channel list that

have bad or weak signals or channelsyou do not want to watch.

1 Press the MENU button.The onscreen menu appears.Then press the CURSORDOWN button repeatedlyuntil INSTALL is highlighted.Press the CURSOR RIGHTbutton to enter the INSTALLsubmenu.

2 Press the CURSORDOWN BUTTON repeat-edly until CHANNEL EDIT ishighlighted. Then press theCURSOR RIGHT or LEFTbutton to access the CHAN-NEL EDIT list.

3 Press the CURSOR UP orDOWN BUTTON to scrollthrough the list of channels.

4 With the channel youwant to edit selected,press the CURSOR RIGHTbutton to mark the channelas SKIPPED. (Channels youmark SKIPPED will not appearwhen you use the CH[annel]+/– buttons to change chan-nels while watching TV.)

5Press the INFO/EXIT but-ton to exit the menu.

INSTALL

LANGUAGETUNER MODEAUTO PROGRAMCHANNEL EDITAutoChron

4

1

23

5

Channel edit 15 DTV 16 DTV 17 DTV 18 DTV 19 DTV 20 DTV 21 DTV

> Skipped> Added> Added> Skipped> Skipped> Skipped> Added

HELPFUL HINTS

• When you want to add achannel that has beenmarked SKIPPED, press theCURSOR BUTTON UP orDOWN to highlight thechannel. Then press theCURSOR RIGHT button tochange SKIPPED toADDED.

28

ADVANCED MENU FEATURES

USING AUTOCHRON

Follow the steps below to setAutoChron™ to download the time

from your PBS station to your TV.After successful setup, AutoChron™will automatically maintain the correcttime using your PBS station until youset the time using the AutoChron™MANUAL option (see panel 30).

1 Press the MENU button.The onscreen menu appears.Then press the CURSORDOWN button repeatedlyuntil INSTALL is highlighted.

2 Press the CURSORRIGHT button to enterthe INSTALL submenu.Then press the CURSORDOWN button repeatedlyuntil AutoChron is highlighted.

3 Press the CURSORRIGHT button to enter theAutoChron SET TIME area.

4 Press the CURSORRIGHT button again toselect AUTO. Within a fewseconds, a menu containingthe time-zone options appears.

5 Press the CURSOR BUT-TON UP or DOWN tohighlight your correct timezone and Daylight SavingsTime option.

6 Press the number buttonson your remote to enter thechannel number for your PBSstation (02, 15, or 121, forexample). Wait until the TVcompletes its search.

7 Press the INFO/EXIT but-ton to exit the menu.

SET TIME

AUTOMANUAL

INSTALL

AUTO PROGRAMCHANNEL EDITLANGUAGETUNER MODEAutoChron

AUTO PROGRAMCHANNEL EDITLANGUAGETUNER MODEAutoChron

INSTALL

SET TIME

CENTRALMOUNTAINPACIFIC

DAYLIGHTSAVING TIME?

YESNO

SEARCH FORTIME

ENTER CHANNEL- - PBS

PLEASE WAIT15

TIME FOUNDEND: PRESS STATUS 11:15 AM

AUTOMANUAL

TIME ZONE?

1

2,3,4

5

6

7

HELPFUL HINTS

• If the time was not found,you will need to locate thecorrect channel numberfor your PBS station andinput that number.

• AutoChron must be set forthe AutoLock to work ondigital channels.

29

ADVANCED MENU FEATURES

SETTING TIME MANUALLY

In addition to using the AUTOCHRONsetting, you can set the time manually.

1 Follow steps 1–3 in the sec-tion “Setting TimeAutomatically” above,then press the CURSORDOWN button to highlightMANUAL and CURSORRIGHT button to enter theMANUAL time input area.

2 Use the number buttonson your remote control toinput the first digit for thetime. You can also press theCURSOR BUTTON UP orDOWN to select a digit. Pressthe CURSOR RIGHT buttonto move to the next digit inputslot and input the time.

If you should need to change anumber you have input, youcan press the CURSOR LEFTor RIGHT button to the digitinput slot to make the correc-tion.

3 After you have input thetime, press the CURSORRIGHT button to enter theAM/PM area. Then press theCURSOR UP or DOWN but-ton to select AM or PM.

4 Press the INFO/EXIT but-ton to exit the menu.

INSTALL

AUTO PROGRAMCHANNEL EDITLANGUAGETUNER MODEAutoChron

11:00 AM

AUTO PROGRAMCHANNEL EDITLANGUAGETUNER MODEAutoChron

INSTALL

ENTER TIME

1

3

2

4

11:00 AM

AUTO PROGRAMCHANNEL EDITLANGUAGETUNER MODEAutoChron ON

INSTALL

ENTER TIME

SET TIME

AUTOMANUAL

ENTER TIME

11:35

30

USING WEAK DIG SIGNAL

Because Digital broadcasting is stillnew it is not uncommon for a

broadcaster to only send out a digitalsignal for part of a day. You could alsobe on the limit of the signal strengthand the reception comes and goes. Ifyou program your channels when thesignal is not being sent or is weak it willnot be saved in your channel set up.However, using the WEAK DIG SIGNALfeature you can add those channelswith weak signals to your channel list.

1 Press the MENU button.The onscreen menu appears.Then press the CURSORDOWN button repeatedlyuntil INSTALL is highlighted.

2 Press the CURSORRIGHT button to enterthe INSTALL submenu.Then press the CURSORDOWN button repeatedlyuntil WEAK DIG SIG is select-ed. Press CURSOR RIGHTbutton to enter the weak digi-tal signal menu.

3 Press the CURSOR LEFT,RIGHT, UP, or DOWNbutton to select a channelto add or skip.

4 Press the INFO/EXIT but-ton to exit the menu.

SET TIME

AUTOMANUAL

CHANNEL EDITLANGUAGETUNER MODEAutoChronWEAK DIG SIG

INSTALL

2-34

1

Weak digital Signal ˚15 DTV16 DTV 17 DTV18 DTV19 DTV20 DTV21 DTV ¸

skippedskippedskippedskippedskippedskippedskipped

HELPFUL HINTS• For the purposes of tun-

ing, your DTV treatsscrambled digital channelslike weak signals regardlessof actual signal strength.

ADVANCED MENU FEATURES31

ADVANCED MENU FEATURES

Use CH BANNER SIZE and VOL-UME DISPLAY to set the size of

these displays on the screen.

1 Press the MENU button.The onscreen menu appears.Then press the CURSORDOWN button repeatedlyuntil INSTALL is highlighted.

2 Press the CURSORRIGHT button to enterthe INSTALL submenu.Then press the CURSORDOWN button repeatedlyuntil CH BANNER SIZE orVOLUME DISPLAY are select-ed.

3 Press the CURSOR RIGHTBUTTON to choose aBANNER SIZE or turn theVOLUME DISPLAY on or off.

4 Press the INFO/EXIT but-ton to exit the menu.

INSTALL

TUNER MODEAUTOCHRONWEAK DIG SIGCH BANNER SIZEVOLUME DISPLAY

11:00 AM

TUNER MODEAUTOCHRONWEAK DIG SIGCH BANNER SIZE SMALLVOLUME DISPLAY

INSTALL

ENTER TIME

23

4

1

SET TIME

AUTOMANUAL

11:00 AM

TUNER MODEAUTOCHRONWEAK DIG SIGCH BANNER SIZEVOLUME DISPLAY ON

INSTALL

ENTER TIMESET TIME

AUTOMANUAL

CHANNEL AND VOLUME DISPLAY OPTIONS

32

ADVANCED MENU FEATURES

EMERGENCY ALERT SETTING (DIGITAL ONLY)

You can select the level of EmergencyAlert you would like to see.

1 Press the MENU button.The onscreen menu appears.Then press the CURSORDOWN button repeatedlyuntil INSTALL is highlighted.

2 Press the CURSORRIGHT button to enterthe INSTALL submenu.Then press the CURSORDOWN button repeatedlyuntil EMERG ALERT is high-lighted.

3 Press the CURSORRIGHT button to enter theEMERG ALERT submenu.Then press the CURSORRIGHT button again to enterthe menu. Press theCURSOR UP or DOWN but-ton to select the level of alertyou want to have presentedor discarded. Then press theCURSOR RIGHT button toselect PRESENT or DISCARD.

4 Press the INFO/EXIT but-ton to exit the menu.

INSTALL

AUTOCHRONWEAK DIG SIGCH BANNER SIZEVOLUME DISPLAYEMERG ALERT

INSTALLEMERG ALERT LOW PRESENT MEDIUM

11:00 AM

ENTER TIME

1

24

3

AUTOMANUAL

INSTALLEMERG ALERT LOW MEDIUM PRESENT

11:00 AMAUTOMANUAL

OR

LOW DISCARD

OR

MEDIUM DISCARD

HELPFUL HINTS

• High Alert levels arealways presented.

33

ADVANCED MENU FEATURES

FACT CH RESET

The Factory Channel reset option isavailable in case you move or

change cable providers and need tostart your channel list all over fromscratch. Only use it if youabsolutely must because you willlose all of your channel program-ming.

1 Press the MENU button.The onscreen menu appears.Then press the CURSORDOWN button repeatedlyuntil INSTALL is highlighted.

2 Press the CURSORRIGHT button to enterthe INSTALL submenu.Then press the CURSORDOWN button repeatedlyuntil FACT CH RESET is high-lighted.

3 Press the CURSORRIGHT button to enter theFACT CH RESET Submenu.Follow the onscreen menu.Press 1 to continue and 0 toreset.

2,3

1

WEAK DIG SIGCH BANNER SIZEVOLUME DISPLAYEMERG ALERTFACT CH RESET

INSTALL

HELPFUL HINTS

• After you have reset thechannels you will need tore-autoprogram the TVbefore you can watch it.See page 12 in the Set-upand Basic Guideto startautoprogramming.

34