advanced manufacturing | june 2020 · 2020. 12. 7. · creaform | metrascan 750 elite &...
TRANSCRIPT
www.mil-as.no // [email protected]
Technology portfolioAdvanced manufacturing | June 2020
3D scanning
Creaform | HandySCAN 700Technology: Optical coordinate measuring systemAccuracy: Up to 0.03 mmVolumetric accuracy: 0.02 + 0.06 mm/m (0.020 mm + 0.015 mm/m with MaxSHOT Next Elite)Resolution: 0.05 mmScanning area: 275 x 250 mmDepth of field: 250 mmPart size (recommended): 0.1…4 mFeatures: Stand-alone
Self-positioningAutomatic mesh outputReal-time visualization
Applications: InspectionReverse engineering
3D scanning
Creaform | MetraSCAN 750 Elite & HandyPROBE Next EliteTechnology: Optical coordinate measuring systemAccuracy: Up to 0.03 mmVolumetric accuracy: 0.078 mm (0.044 mm + 0.015 mm/m with MaxSHOT Next Elite)Single point repeatability: 0.058 mm (HandyPROBE)Resolution: 0.05 mmScanning area: 275 x 250 mmDepth of field: 200 mmPart size (recommended): 0.2…6 mFeatures: Dynamic referencing
Automatic alignmentAutomatic mesh outputReal-time visualization
Applications: InspectionReverse engineering
3D scanning
Creaform | MaxSHOT Next EliteTechnology: Optical coordinate measuring systemAverage deviation: 0.005 mm/mVolumetric accuracy: 0.015 mm/m
0.020 mm + 0.015 mm/m (with HandySCAN 700)0.044 mm + 0.015 mm/m (with HandyPROBE Next Elite)0.044 mm + 0.015 mm/m (with MetraSCAN 750 Elite)
Features: Automatic feedback on measurement quality Applications: Inspection
Reverse engineering
3D scanning
Leica | BLK2GoTechnology: Simultaneous localization and mapping(SLAM)Accuracy: 6-15mm relative 20mm absoluteRange: 0.5-25mField of view: 360° horizontal, 270° vertical Point measurement rate: 420 000 pts/secSoftware: Leica Register 360(BLK Edt)Weight: 775gBattery: Exchangeable Li-Ion with 45 min scanning timeCamera: 12Mp 90°x120° rolling shutterPanoramic camera: 4.8Mp 300°x135° global shutterFeatures: Colorized point cloud
Class 1 laserIndoor and outdoor use / IP54, +5-40°CUSB-C/Wireless communication and datatransferReal-time visualization via iPhone App
Applications: Inspection, As-built, BIMVisualization, 3D modeling
3D plastic printer
Formlabs | Form 3Technology: Low Force StereolithographyBuild volume (LxWxH): 145 mm x 145 mm x 185 mmLayer height: 25…300 µmMaterial: Clear, greyscale and draft
Rigid, flexible, elastic and high tempDurable and tough
3D plastic printer
Ultimaker | S5 Pro BundleTechnology: Fused Filament Fabrication
Dual extrusionBuild volume (LxWxH): 330 x 240 x 300 mmLayer height: 20…200 µmMaterial: PLA
ABSNylonPCPPTPUOther 3D-printable thermoplastics…
3D plastic printer
Stratasys | F370Technology: Fused Deposition Modeling
Dual extrusionBuild volume (LxWxH): 355 x 254 x 355 mmLayer height: 127…330 µmMaterial: PLA
ABS and ABS-ESDASATPUPC-ABSDiran (Nylon-based)
3D composite printer
Markforged | X7Technology: Fused Filament Fabrication
Continuous Filament FabricationBuild volume (LxWxH): 330 mm x 270 mm x 200 mmLayer height: 50…200 µmMatrix material: Onyx
NylonFiber reinforcement: Carbon fiber
KevlarFiberglassHSHT fiberglass (High Strength High Temperature)
3D metal printer
Markforged | Metal X – Wash-1 – Sinter-2Technology: Bound Powder Extrusion / Atomic Diffusion Additive ManufacturingBuild volume (LxWxH): 300 mm x 220 mm x 180 mmLayer height: 50…125 µmMaterial: Tool steel (A2, D2 and H13)
Stainless steel (17-4 PH and 316L)Nickel alloys (Inconel 625)Titanium alloys (Ti6Al4V)Cobber
3D metal printer
SLM Solutions | SLM 280Technology: Powder Bed Fusion / Selective Laser MeltingLaser system: Single 400 W fiber laserBuild volume (LxWxH): 280 mm x 280 mm x 365 mmLayer height: 20…75 µmMaterial: Tool steels
Stainless steelsAluminum alloysTitanium alloysNickel alloysCobalt alloysCobber alloys
3D hybrid machine
DMG MORI | Lasertec 65 3D HybridTechnology: Direct Energy Deposition / Laser Metal Deposition
5-axis millingLaser system: 2500 W fiber laserMax travel (X-Y-Z): 735 mm - 650 mm - 560 mmTable diameter: 650 mmMax table load: 600 kgMaterials: Tool steels
Stainless steelsNickel alloysCobber alloys (bronze and brass)Chrome-cobalt-molybdenum alloysTungsten-carbide-matrix materials
Plasma atomization system
TEKNA | TEKSPHERO-15 – TEKNANO-15 – TEKSPRAY-15Technology: Induction plasma
Spheroidization, nano-synthesis and deposition/coating of powder materialPlasma power: 15 kWFeeding system: Vibration feeder (small batches)
Disc feeder (medium size batches)Capacity: Up to 1 kg pr. hourPowder size: Particles up 200 µmMaterials: Pure metals
AlloysCeramics
Welding equipment
Migatronic | Sigma Galaxy 400, Omega Yard and PI TIG 350Technology: MIG/MAG, MMA and TIG weldingFeatures: Pulse
Sequence and Sequence RepeatIntelligent Arc ControlIntelligent Gas ControlPowerArcDUO PlusMiga Job ControlMiga Log