advances in materials manufacturing science and technology · advances in materials manufacturing...
TRANSCRIPT
Advances in MaterialsManufacturing
Science and Technology
Selected Papers from the11th International Manufacturing Conference in China
September 18th - 20th, 2004, Jinan, China
Edited by
Xing Ai, Jianfeng Li and Chuanzhen Huang
l i p TRANS TECH PUBLICATIONS LTDSwitzerland • Germany • UK • USA
Table of Contents
Preface vii
Studies on the Performance of Diamond Thin Films with Different TungstenCarbide Substrates
M. Chen, X.G. Jian, F.H. Sun, Y.P. Ma and Z.M. Zhang 1
Process Technology of Aspherical Mirrors Manufacturing withMagnetorheological Finishing
H.B. Cheng, Z.J. Feng and Y.B. Wu 6
Brazed CBN Grinding Wheel with Ag-Base Filler AlloyW.F. Ding, J.H. Xu, J.B. Lu, Y.C. Fu, B. Xiao and H.J. Xu 11
Effects of Tool Geometrical Parameters on the Chip Formation and Cutting Forcein Orthogonal Cutting
G. Fang and P. Zeng 16
Compositional Design of Multiphase Composite Ceramic Tool Material Based onthe Thermal Shock Resistance and Its Application
C.H. Xu, C.Z. Huang and X. Ai 21
Modeling and Analyzing on Nonuniformity of Material Removal in ChemicalMechanical Polishing of Silicon Wafer
J.X. Su, D.M. Guo, R.K. Kang, Z.J. Jin, X.J. Li and Y.B. Tian 26
Development of a Cutting Database System with Prediction and Analysis FunctionsY. Wan, Z.Q. Liu, X. Ai and J.G. Liu 32
Research on Multifunctional Micro Machining EquipmentB.X. Jia, Z.L. Wang, F.Q. Hu, X.H. Li and W.S. Zhao • 37
Investigation on Performance of QT700-2 Material by Laser PeeningJ.C. Yang, J.Z. Zhou, Y.K. Zhang, C.J. Yang and J.Z. Lu 43
Evaluation and Measurement of Surface/Subsurface Crack Damageof Ground Ceramics
B. Lin, H.T. Zhu, H. Wu, Z.F. Wang and S.Y. Yu 47
Growth of Nanocrystalline Diamond Films on Co-Cemented Tungsten CarbideSubstrates by Hot Filament CVD
F.H. Sun, Z.M. Zhang, H.S. Shen and M. Chen 52
Ultrasonic Machining Mechanism of Sintered Nd-Fe-B Magnetic MaterialsJ.H. Zhang, S.F. Ren, Z.W. Niu, L. Li and M.G. Xu 59
Research on Ultra-Precision Process of STAVAX ESRJ.L. Yuan, F.Y. Lou, Z.W. Wang, M. Chang, W.P. Du and B.C. Tao 63
A Study on the Microstructure of Ti(C,N) Matrix Cermet Tool MaterialC.Z. Huang, L. He, J. Wang and H.L. Liu 67
Strain Path Analysis of an Axisymmetric Part within Controlled Forming ProcessL. Wang , T.C. Lee and L.L. Liu 72
Advances in Materials Manufacturing Science and Technology
Performance of Diamond Segments in Different Machining ProcessesX.P. Xu, Y.B. Hong and S. Chen 77
Development of an Intelligent System for Tool Materials Selectionin High Speed Machining
Z.Q. Liu, X.G. Peng and J.G. Liu 82
Minimum Lubrication Milling of Titanium AlloysA. Hassan and Z.Q. Yao 87
Error Estimate of Approximate Double Circular Arc Interpolated Method forCurve Smoothing
Z.Q. Zhang, Q.S. Yan, Z.D. Zheng and S.B. Chen '. 92
The Effect of the Content of Carbide on the Mechanical Properties of Ti(C,N)Based Cermet
C.Z. Huang, L. He, H.L. Liu and S.L. Wang 96
Modeling of Grinding Force in Constant-Depth-of-Cut UltrasonicallyAssisted Grinding
Y.B. Wu, M. Nomura, Z.J. Feng and M. Kato 101
A Neural Network Approach for Milling Process ControlZ.Y. Yang, T. Huang and Y.M. Yang 107
Correlating Surface Functionality with Machining Conditions in PrecisionMachining Processes
X.C. Luo, K. Cheng and R. Ward 112
The Experiment Research of Diamond Wire-Saw in Quarrying Granitewith High Efficiency
J.S. Zhang, B. Huang, Z. Wang, X.L. Wang and Z.W. Liu 117
Cutting Force Model for Contour Surface Machining of Gear Indexing Cam withFlat End Milling
P.Q. Guo, C.Z. Huang and P. Zhao 122
Study on the Effect of Tool Rake Angle on Cutting Vibration inPrecision Machining
G.C. Wang, L.J. Ma and H.J. Pei 127
Grindability Evaluation of Advanced CeramicsA.B. Yu, L.J. Zhong and X.L. Tian 132
Investigation on the Bonding Strength between the Hard Alloy Cladding Layer andthe Steel Substrate
F.T. Liu, S.X. Song, J.R. Yang, W.L. Huang and Z.Q. Li 136
A New Cooling Nitrogen Gas Generator and Experiments of High Speed Millingof Ti Alloy
N. He, L. Li and X.L. Li 140
Molecular Dynamics Simulation on the Mechanism of Nanometric Machiningof Single-Crystal Silicon
H. Wu, B. Lin, S.Y. Yu and H.T. Zhu 144
A Study on the Vibration Analysis of a Ball Screw Feed Drive SystemY.H. Choi, S.M. Cha, J.H. Hong and J.H. Choi 149
Materials Science Forum Vols. 471-472 xi
Research of the Complex Surface Algorithm Based on Recursive SubdivisionNumeric Control Interpolation
M.J. Chen, W.X. Guo and D. Li 155
The Assessment of Cutting Temperature Measurements in High-Speed MachiningY. Wan, Z.T. Tang, Z.Q. Liu and X. Ai 162
Effect of Hot Pressing Temperature on Mechanical Properties and Microstructureof Si3N4-TiCnano Composites
J. Zhao, X. Ai, X.P. Huang and Z.J. Lu 167
Abnormality Detection by Analysis of Cutting SoundL.Y. Chen, T. Osawa, H. Narita, T. Nakamura and H. Fujimoto 172
Intelligent Error Compensation in CNC Machining through Synergistic InteractionsAmong Modeling, Sensing and Learning
Z.Q. Liu, J.B. Zhang and Z.T. Tang 178
Modern Analysis and Design for the Generalized Lubrication System of InternalCombustion Engine
M. Liu, F.Q. Cheng, X.F. Fan and P.Q. Ge 183
Research of Intelligent Tool Condition Monitoring Technology Basedon Multi-Information Fusion
S.M. Ji, L. Zhang, Y.H. Wan, X. Zhang, J.L. Yuan and L.B. Zhang 187
Removal Mechanism in Wire-Sawing of Hard-Brittle MaterialJ.F. Meng, J.F. Li, P.Q. Ge and W. Gao 192
Tool Condition Monitoring Based on an Adaptive Neurofuzzy ArchitectureP. Fu, A.D. Hope and G.A. King 196
Three-Dimensional Finite Element Analysis of Metal Powder CompactionP.Q. Chen, W. Xia, Z.Y. Zhou, W.P. Chen and Y.Y. Li 201
Effect of Whisker Content on Mechanical Properties and Microstructure ofHydroxyapatite-SiCw Composite Bioceramics
Z.W. Niu, J.H. Zhang, S.F. Ren, L. Li and M.G. Xu 206
Study on Groove Optimization Technology Based on the Power Spectrum AnalysisZ.J. Li, Y.N. Cheng, G.Y. Tan, S.Y. Ning and Z.G. Wang 211
Modeling of Computer-Controlled AC Servo Feed SystemZ.Y. Xi, C.H. Lu and J.C. Zhang 216
Mechanical Properties and Microstructure of Self-Lubricating Ceramic CuttingTool Materials
J.X. Deng, T.K. Cao and J.L. Sun 221
Fast Consolidation of Iron Powders by Pulse Electric Current SinteringY.Y. Li, Y. Long, X.Q. Li, W.P. Chen and W. Xia 225
Development of 3-D Parameterized Design System for Involute Gear PartsH. Gao, K. Zhao and Y. Lu 230
Study on Multi-Dimension Integration Technology of CAPP/PDMZ.L. Jiang, Z.Q. Li, C.Z. Huang and S.H. Feng 234
Study on the Micro-Topography and Texture Characteristic of Machined Surface inHigh Speed Turning for Carbon Steel
B.Y. Ye, J. Xu, X.C. Liu and Y.M. Quan 238
xii Advances in Materials Manufacturing Science and Technology
Microstructure and Mechanical Properties of two Kindsof A^Os/SiC Nanocomposites
H.L. Liu, C.Z. Huang, J. Wang and J. Sun 243
Formation and Flanging Burrs Control of Three-Dimensional Substructure onCopper Surface
Y. Tang, W. Liu, Z.Q. Wu and S.W. Yang 248
Development of New Multi-Dimension Squeezed Penetration Piling MachineS.Q. Huang, Y.M. Han and Y.D. Wang 255
A Study on the Microstructure of Nano-Scale Ceramic Tool MaterialsB. Zou, C.Z. Huang, H.L. Liu and S.L. Wang 260
Application of Hybrid Fuzzy PID Control to Auxiliary Workpiece TableD.W. Zhang, Y.L. Tian and B. Yan 264
Theoretical and Experimental Study on Optimum Design of Gear ProfileModification Curves
S.S. Zhang, J.Z. Zheng and L. Cheng 269
Processing and Mechanical Properties of Biphasic Calcium-Phosphate/Poly-L-Lactide Composite Biomaterials
C.Y. Tang, N. Ignjatovic, D.P. Uskokovic, P.S. Uskokovic, K.C. Chan, S.C.L. LoandT.C. Lee : 273
The Application of Numerical Control Based on Network Manufacturing in PlasticWindow Production
X.B. Ze, H. Ding, H. Wang and X.Q. Wang 278
Preparation of Agglomerate-Free Starting Powders for TiCp-Reinforced/?-SiAlON Nanocomposites
Z.J. Lu, X. Ai and J. Zhao 282
Study on Machining of Hard-Brittle Materials with Thin-Walled Monolayer BrazedDiamond Core Drill
H.H. Su, H.J. Xu, B. Xiao, Y.C. Fu and J.H. Xu 287
Cutting Forces in Sawing Process of Reinforced ConcreteC.Y. Wang, Y.N. Hu and H.N. Ding 292
New Heat Flux Model in Surface GrindingL. Zhang, P.Q. Ge, J.F. Meng, J.H. Cheng and M. Wang 298
Study on the Mechanism of High Speed Small Hole Drilling by EDMS.L. Ye, J. Su, Z.X. Jia and R. Hua ., 302
Effect of Cutting Parameters on Integrality of Machined Surface in Hard CuttingX.L. Liu, F.G. Yan, Y.F. Li, Y.J. Wang and H.M. Pen 307
Optimal Control of Active Ambulance Stretcher SuspensionL.L. Sun and K.J. Song 312
Precision Finishing Combined with ELID and MRFG.W. Kang, F.H. Zhang and S. Dong 317
Effect of TiN Addition on Microstructure and Mechanical Properties of ZirconiaMatrix Ceramic Tool Material
J. Sun, C.Z. Huang, H.L. Liu and S.L. Wang 321
Materials Science Forum Vols. 471-472 xiii
On CNC Machining and Part Program Preprocessing Based on STEP-NCC.R. Zhang and R.L. Liu 326
A New Model for Predicting Small Crack Growth RatesH.C. Zhang, K.Z. Huang and J.H. Cheng 330
Symmetric Fuzzy Prediction of Cutting Force Uncertainty Based on Maximum-Minimum and Mean Values
, W.P. Wang and K.S. Hu 335
Experimental Investigation on the High-Speed Machining of Hardened SteelY.M. Quan, C.Y. Wang and Z.W. He 339
Solutions for Interpreting STEP-NC Based Part ProgramR.L. Liu and C.R. Zhang 344
Microstructure and Mechanical Properties of Ti(C,N)-Zr02-Ni-MoComposite Cermet
L. He, C.Z. Huang, J. Sun and H.L. Liu 348
The Advancement of SPM-Based NanolithographyL.B. Zhang, J.X. Shi, J.L. Yuan, S.M. Ji and M. Chang 353
A Method to Forecast the Cohesive Zone of Blast FurnaceS.Z. Li, J. Cheng and W.Q. Ma 358
Investigation on Material Removal Rate in Rotation Grinding for Large-ScaleSilicon Wafer
Y.B. Tian, R.K. Rang, D.M. Guo, Z.J. Jin and J.X. Su 362
A Study on the Mechanical Properties of Ti(C, N) Based Ceramic Tool MaterialS.L. Wang, L.Q. Xu, C.Z. Huang and H.L. Liu 369
Surface Quality Analysis of Milling Hardened Die Steel with Micro-End MillY.N. Hu, C.Y. Wang, J.L. Wang and Z. Qin ..- 374
Tool Geometry Effect on Machined Surface Integrity in Precision TurningHigh-Strength Spring Steel
H.X. Wang, W.J. Zong, Y.C. Liang and S. Dong : : 380
Superplastic Bulging of an Al-6Mg-0.3Sc Alloy and Its Forming LimitsG.Q. Tong, K.C. Chan and T.G. Nieh 385
Evaluation on Died-Pressed Binders of Ti(C,N)-Based Cermet PowdersC. Fan, W.H. Xiong, J. Wei, P. Feng, Y. Lei and Z.G. Liang 390
Study on the Thrust Cutting Force in Ultrasonic Elliptical Vibration CuttingC.X. Ma, E. Shamoto and T. Moriwaki ;. 396
Research Status Quo of Simulation Design Methods for Ceramic Tool MaterialsL.Q. Xu, C.Z. Huang, S.L. Wang and H.L. Liu 401
Studies on Exploiting Further the Potential of High Efficiency GrindingY.C. Fu, HJ. Xu and F.H. Sun 405
Mathematical Description of Spatial Hob-Generating Motion for an Arbitrary GearTooth Profile
X.Y. Feng, H. Li and X. Ai 409
Experimental Study on High Speed Milling of Ti AlloysL. Li, N. He and J.H. Xu 414
xiv Advances in Materials Manufacturing Science and Technology
Local Region Mahalanobis Distance Feature and Its Application in MonitoringWearing and Breakage States of Cutting Tools
S.M. Ji, L. Zhang, Y.H. Wan, X. Zhang, J.L. Yuan and L.B. Zhang 418
A New Type of Non-Chisel-Edge Shallow-Drill for Machining High Manganese SteelY.P. Han, J.F. Meng and J.Q. Zhou 422
Fabrication of Ultra-Fine Diamond Abrasive Tools by Sol-GelJ. Liu and X.P. Xu 426
Wear of High Speed Steel Bi-Metal Bandsaw Blade when Cutting AvestaPolarit17-7 Stainless Steel in the As-Cast State
M. Sarwar, M. Persson and H. Hellbergh 431
Recent Developments in Tool Materials for High Speed MachiningZ.Q. Liu, Y. Wan and X. Ai 438
A Study on Warm Compacting Behaviors of 316L Stainless Steel PowderZ.Y. Xiao, M.Y. Ke, W.P. Chen, D.H. Ni and Y.Y. Li 443
Plasma-Particle Interaction in Spray FormingJ.C. Fang, W.J. Xu and Z.Y. Zhao 448
Study on Technology of Flexible Forming of Sheet Metal Basedon Laser Shock Waves
Y.K. Zhang, J.Z. Zhou, D.W. Zuo, J.C. Yang and L. Cai 453
Electrical Discharge Grinding of Polycrystalline DiamondJ.Y. Pei, C.N. Guo and D.J. Hu 457
Modelling the Depth of Jet Penetration in Abrasive Waterjet Contouring ofAlumina Ceramics
J. Wang, H. Liu and C.Z. Huang 462
Wear Mechanism of Diamond Mills in Stone CuttingB. Huang,-Z.W. Liu, J.F. Li, J.S. Zhang and Z. Wang 469
Research on Ultra-Precision Machining Technology for KTPJ.L. Yuan, F.Y. Lou, Z.W. Wang, M. Chang, W.P. Du and Q.F. De 473
Two Approaches for Greenization of Fixture Design and CorrespondingTechnology Innovation
K.M. Zhong, P.Q. Guo and Q. Chi 477
Development of Endless Diamond Wire Saw and Sawing ExperimentsP.Q. Ge, L. Zhang, W. Gao and Z.C. Liu 481
Neural Network Prediction of Segment Wear in Stone SawingX.P. Xu and Y.F. Zhang 485
A Study on Computer Simulation of Plastic Lens Molding ProcessW. Li, Y.F. Jin, X. Lv and C.H. Kua 490
Design of High Precision Power Supply for Low-Frequency Vibration CuttingX.G. Jiang and D.Y. Zhang 494
Wrinkling Limit Based on FEM Virtual Experiment during NC Bending Processof Thin-Walled Tube
H. Li, H. Yang, M. Zhan, L.G. Guo and R.J. Gu 498
Materials Science Forum Vols. 471-472 xv
Forming Defects Analysis of Auto-Panel Stamped Part with ExperimentalStrain Approach
H.Y. Xiang and Y.X. Zhong 503
Machine Vision and Data Reconstruction for Measuring Free Form SurfaceH.W. Zhang, G.X. Zhang and Y. Shi 508
Development of an Internet-Based Interactive Globoidal Indexing Cam MechanismsDesign System
W. Tang, Y.Q. Zhou and H. Zhang 513
Time Series Model Study on the NC Grinding Process of Isometric Polygonal ProfileD.S. Wang, A.P. Zhou, P.L. Huang and X.Y. Zhao 518
Investigational Advances in Residual Stresses by Hard TurningX.P. Zhang, C.R. Liu and Z.Q. Yao 523
Pneumatic Proportional Position Control System Based on BP Neural NetworksY.J. Liu, X.Z. Kong and Z.W. Li 528
Research on Hierarchical Design Method of Open Modular ArchitectureCNC System
Z.Y. Wu, T.Y. Wang, H.W. Li, W.J. Wang and T.J. Dong 532
A Combined Model of the Active Vibration Control of the Coupled Flexible SystemJ.C. Niu, G.Q. Zhao and K.J. Song 537
Balancing of Tool/Toolholder Assembly for High-Speed MachiningS. Zhang, X. Ai, W.X. Tang and J.G. Liu 542
Numeric Investigation of the Cutting Temperature Fields on the Rake Face inOrthogonal Machining
S.Y. Wang, J. Zhao, H. Meng, X. Ai and Z.L. Li 547
Internet-Based Physical Simulation of Drilling ProcessL.H. Dong, Y.L. Zhao and C.H. Fan 552
Study on the Semi-Active Suspension Control System and Its Stability Basedon T-S Fuzzy Neural Control Strategy .
L. Chen, H.B. Jiang and M.C. Yang 557
Simulation Diagnosis for the Bottleneck of Production Lines and Its ApplicationJ. Zhou, Z.Q. Liu, P.L. Huang, X. Ai and J.X. Deng 563
Experimental Investigation on 3D Laser Forming of Metal SheetL.J. Yang, Y. Wang, M. Djendel and L.T. Qi 568
Fine-Grained Access Control of PDM and CAPPS.H. Feng and Z.L. Jiang 573
The Application of Product Variant Design Based on Case-Based Design in theDevelopment of Stone Equipments
J.K. Wang, X. Ai, J.S. Zhang and Z. Wang 577
Finite Element Simulation of the Orthogonal Metal Cutting ProcessS.J. Chen, Q.L. Pang and K. Cheng 582
Real-Time Error Compensation Technique and Its Applicationon NC Machine Tools
G.L. Liu, H.T. Zhao, G. Turyagye, Y.Q. Ren, J.G. Yang, W.Z. Chen and S.W. He 587
xvi Advances in Materials Manufacturing Science and Technology
The Inverse Kinematics Algorithm of Redundant DOF RobotY. Wang and L. Wang 592
Optimization of Technological Parameters in the Calescent Superplastic BulgeForming of Ti-6A1-4V Alloys Sheet Based on Fuzzy Neural Network
M.H. Chen, L. Gao, Z.S. Zhu, D.W. Zuo and M. Wang 596
The Architecture of Reliability Information System for CNC Machine Tool inConcurrent Engineering
Q. Zhang, S.J. Liu, C.Y. Duan and Y.M. Zhu 603
Balanced Octree for Tetrahedral Mesh GenerationKM. Au and K.M. Yu 608
The Objectives Decision Making Study in Product Innovation Development ProcessBased on TRIZ Technology Evolution Theory
F.Y. Zhang, Y.S. Xu and D.J. Hu .'. 613
Research on Surface Quality Control of Moulds Formed by Plasma Arc SprayingQ.L. Deng, K.K. Sun, G.C. Zhou, J.L. Song, Y. Wang and D.J. Hu 620
An Experimental Study of Specific Energy in Grinding GraniteY.Q. Yu, Y. Li and X.P. Xu 625
Overview on Measuring Methods of Bond Strength of Cladding MaterialJ.R. Yang, Z.Q. Li and C.Z. Huang 630
Feed Rate and Depth of Cut Influence on Cutting Forces in Diamond TurningAluminium Alloy
H.X. Wang, W.J. Zong, D. Li and S. Dong 634
A Study on Vacuum Brazing Procedure of Plate Heat ExchangerS.S. Zhang, Y.H. Cheng and L. Cheng 640
Study on Hole Making in EACVD Thick Diamond FilmD.W. Zuo; W.Z. Lu, X.F. Li, X.Q. Chu and M. Wang 644
Finite Element Analysis for Deformation of Toolholder/Spindle Interface Systemat High Rotation Speed
D.L. Wang, T.H. Li and D.C. Kang 649
Application of Wavelet Digital Filter of Fourier Transform Profilometryin 3-D Measurement
Y.S. Wang, S. Fu, J.Q. Xu, C.L. Zhou, S.C. Si and C.Y. Gao 654
Finite Element Analysis of Effects of Ball Burnishing Parameterson Residual Stresses
W.J. Deng, W. Xia, Z.Y. Zhou, W.P. Chen and Y.Y. Li 658
Structure Dynamic Modification and Optimization for High-Speed FaceMilling Cutter
W.X. Tang, X. Ai, H.Y. Wu, S. Zhang and H. Jiang 663
Application of the Hilbert-Huang Transform to Pick Up Surface RoughnessJ.H. Wu, Z.Q. Yao and Y. Jin 668
Integrated Product Design Using Rapid Prototyping Technology and Rapid Toolingin Concurrent Engineering Approach
A.K. Das 672
Materials Science Forum Vols. 471-472 xvii
Web Based Virtual Design of Dynamics of Roller Gear Cam SystemY.Q. Zhou, W. Tang, H. Zhang and B.C. Shi 677
Study and Development of Appliances Recycling Management Information SystemJ.Y. Wang, Z.F. Liu and Y. Lv .....682
Development of Parameters Selection System for Ultrasonic Vibration AssistedElectro-Discharge Machining
Y.J. Hu, J.H. Zhang, X.F. Wang and S.F. Ren 687
An Investigation on High Strain Rate Superplasticity of an Al-Cu-Mg-Ti-SrIngot Alloy
X.J. Xu, L. Cai and S.S. Kim 692
A Monitoring System of Drill Wear States Using a Hybrid Neural NetworkV. Karri and T. Kiatcharoenpol 697
Partial Approximate Symmetry Detection of Geometric ModelC.H. Gao, F. Langbein, D. Marshall, R. Martin, Y. Li and Z. Yang 702
A New Parallel Robot for Steel SnaggingB.F. Feng, H. Shi and G.Q. Cai 707
Development of Nano-TiN Modified Cermet CutterF. Xie, H.D. Yang, C.G. Zhang and N. Liu 711
Study on Preprocessing Methods for Color 3D Point CloudX.D. Zhang, C.K. Sun, C. Wang and S.H. Ye 716
Manufacturability of Fractal GeometryY.C. Yeung and KM. Yu 722
Theoretical Study on Extended Master Model of Mould FeatureB. Zheng, J.K. Sun and Z.L. Jiang 727
Experimental Study on the Milling of a High Strength Titanium AlloyG.S. Geng, J.H. Xu, Y.F. Ge and Y.C. Fu 731
Approach to the Improvement of Laser Cutting Accuracy for Laminated SolidManufacture by Dynamic Compensation
G. Wang and K. Liu ; 736
The Mechanism of Ultrasonic Vibration Improving MRR in UEDM in GasQ.H. Zhang, R.X. Du, J.H. Zhang, J.Y. Yang and S.F. Ren 741
A Study on the Failure Procedure of the Film-Substrate Interface Based on theLaser Scratch Testing Technique
A.X. Feng, Y.K. Zhang, H.K. Xie and L. Cai 746
A Surface Modification Method by EDM and Its Application to Cutting ToolsW.S. Zhao, Y. Fang, Z.L. Wang and L.H. Li 750
Robust Position Controller Design for Linear Servo Units Usedin Noncircular Machining
S.T. Huang, Z.J. Feng, H.B. Cheng and W. Zuo 755
Simulation for Guide Roll in 3D-FE Analysis of Cold Ring RollingL.G. Guo, H. Yang, M. Zhan, H. Li and L.Y. Li 760
The Study on the Dynamic Characteristic of High Speed Machine Tooland Experiment Validate
Y.M. Zhang, X.L. Lin, X.D. Wang and G.Q. Cai 765
xviii Advances in Materials Manufacturing Science and Technology
Method of Product Development Process Analysis and Reengineering forConcurrent Engineering
D.Z.Liu, M.Liu and P.S. Zhong 770
Comparative Experiments for Different End Mills of Indexable Insertswith 3-D Chip Breaker
Y. He and Z.Q. Yao 775
Dispersion and Stability of Nanodiamond in Clean OilX.Y. Xu, Z.M. Yu, Y.W. Zhu and B.C. Wang 779
Mechanism of Electrode Material Removal in Short Pulse Time ElectricDischarge Machining
Z.L. Wang, J.Z. Cui, X.F. Liu and W.S. Zhao 784
An Investigation into Surface Roughness of Burnished Hypereutectic Al-Si AlloyBased on the Taguchi Techniques
L.F. Han, W. Xia, Y.Y. Li and W.P. Chen 790
Process Analysis on a Special Projection Welding with Coupled FEMA.H. Luo and G.L. Chen 795
Particle Swarm Optimization for Vehicle Routing Problem with Time WindowsY.W. Zhao, B. Wu, W.L. Wang, Y.L. Ma, W.A. Wang and H. Sun 801
Module Partition of Equipment for Working Special-Shaped Stones Basedon Function Analysis
Z. Wang, J.S. Zhang, C. Zhang, F.Y. Yu, X.H. Ren and Z.W. Liu 806
Research on Thickness of the Free Confinement Medium in Laser Shock ProcessingR.F. Chen, Y.Q. Hua, J.C. Yang and Y.K. Zhang 811
Investigation on Influencing Factors of AFM Micro Probe NanomachiningY.D. Yan, S. Dong and T. Sun .: 816
Research on the Sintering Process and Performance of Large-Scale Alumina MatrixCeramic Products
X.H. Zhang, C.X. Liu and J.H. Zhang 821
Research and Application on High Efficiency Reversible Cutting TechniqueW.G. Wu, S.Q. Pang and Q.X. Yu 825
Development of PMAC-Based Multifunctional Combined CNC MachineM.Y. Huo, J.Q. Xu, J.H. Zhang, X. Ai and Y.J. Hu 830
The Experiment Analysis and Numerical Simulation on Fractureof Complex-Shaped Part Drawing
Z.Z. Sun, Y.Y. Yang, Y.Q. Chen, J.Y. Li, L.R. Guo and Q.B. Hang 834
Research on Precision Forging Law of Complicated Blade by Using 3D FESimulation and Physical Modeling
M. Zhan, H. Yang and Y.L. Liu 839
Analysis of Step Interference Fit of the High Speed Motorized Spindle with FiniteElement Method
P. Ma, C.X. Liao, M.L. Duan, J.K. Li, D.N. Li and B.L. Zhang 844
Rough Set Data Analysis System and Its Applications in Machinery Fault DiagnosisL.N. Hao, W.L. Chen, X.F. Zhang and W.S. Wang 850
Materials Science Forum Vols. 471-472 xix
Collision and Determination of Workpiece Location in Parallel Mechanism TypeMachine Tools
X.M. Zhao, Y.Z. Bi and H.L. Wang 855
Numerical Simulation of Sheet Deforming Caused by Laser ShockingJ.Z. Zhou, Y.K. Zhang, D.W. Zuo, C.J. Yang and L. Cai 860
A Hybrid Model for Tool Condition Monitoring and Optimal Tool ManagementY.X. Yao, Y. Lu, Z.J. Yuan and J.Y. Hu 865
Direct Joining between Ethylene Propylene Rubber and Cast Iron with FunctionalPolymeric Nanofilm
Z.X. Kang, W.P. Chen, Y. Long, K. Mori and Y.Y. Li 871
Study on the Machining Technology of Composite MaterialsJ.Y. Zhang, Q.X. Yu, S.Q. Pang and Z.F. Zhu 876
Research on Direct Laser Sintering of Ni-AUoy Powder and Microstructure FeatureJ.F. Zhao, Y. Li and J.H. . Zhang 881
Laser Driven Substructural Modification of Austenitic Stainless SteelM. Zhou, X.Q. Zhu, Q.X. Dai and L. Cai 886
Taguchi Methods to Optimize TiN Coating Surface RoughnessS.L. Yim, K.M. Yu, D. Kwok and T.C. Lee 891
Study on Process Decision Methodology for Sheet Metal Stampingby Case Based Technology
W. Liu, Y.Y. Yang and Z.W. Xing 895
Intelligent Pattern Recognition of Manufacturing Features in Engineering DrawingsC.A. Liu, Z.H. Yang and L.M. Zha 900
A New Fabrication Method of Neutron Fresnel LensJ.Q. Guo, H. Ohmori, W. Lin, T. Adachi and H.M. Shimizu : 904
Author Index 909
Keyword Index : 915