ae-681 composite materials
TRANSCRIPT
![Page 1: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/1.jpg)
AE-681 Composite Materials
Instructor: Dr PM MohiteInstructor: Dr. PM MohiteOffice: AE-11, Aerospace EngineeringEmail: [email protected]: 6024
Course Credits: 4LTPD: 3-0-0-0
Course Content:• Introduction Definition classification behaviors of unidirectional composites• Introduction, Definition, classification, behaviors of unidirectional composites• Analysis of lamina; constitutive classical laminate theory, thermal stresses,• Design consideration, analysis of laminates after initial failure, interlaminart f t h i j i t d i t l h t i tistresses, fracture mechanics, joints and experimental characterization,
• Micromechanics• Factors influencing strength and stiffness failure modes,• Performance under adverse environment• Prediction of strength, stiffness
![Page 2: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/2.jpg)
AE-681 Composite Materials
Reference Books/Material:Reference Books/Material:• Mechanics of Fibrous Composites, CT Herakovich.• Analysis and Performance of Fibre Composites, BD Agarwal and LJ Broutman.• Mechanics of Composite Materials, RM Christensen.• Any other book on composite materials• Research papers
Grading Policy:Midsem I + II: 40%Midsem I + II: 40%Assignments: 20% (Individual + Group)Endsem: 40%
• Absolute 40% for passing. Relative grading after that.• Assignments should be submitted on due date by 5.00 pm. Late submissionand copying will be heavily penalized !• Attendance will be monitored regularly.
![Page 3: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/3.jpg)
About Fibrous Composites
![Page 4: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/4.jpg)
Composite: Formal Definition and History
What is composite?What is composite?Definition:• A material which is composed of two or more materials at a microscopic scale
d h h i ll di ti t hand have chemically distinct phases.• Heterogeneous at a microscopic scale but statically homogeneous atmacroscopic scale.• Constituent materials have significantly different properties.
Classification of certain materials as a composite:
1. Combination of materials should result in significant property changes2 Content of the constituents is generally more than 10%2. Content of the constituents is generally more than 10%3. In general, property of one constituent is much greater (≥ 5) than the other
![Page 5: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/5.jpg)
Composite: Formal Definition
History: Oldest application/existence of composite material?History: Oldest application/existence of composite material?
4000 B.C. – laminated writing material from the papyrus plant1300 B.C. – Egyptians and Mesopotamian used straw bricks1200 A.D. - Mongols invented the first composite bow
![Page 6: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/6.jpg)
Composite: Formal Definition and History
Composite Bow dates back to 3000 BC (Angara Dating)Composite Bow – dates back to 3000 BC (Angara Dating)Materials Used:
Wood, Horn, Sinew (Tendon), Leather, Bambooand Antler (Deer horn)
Horn and Antler: naturally flexible and resilient
Sinews: back tendons or hamstrings of cows and deer
Glue: From bladder of fish
Strings: Sinew, Horse hair, Silk
Overall processing time was almost a year !
Source: http://medieval2.heavengames.com
![Page 7: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/7.jpg)
Composite: Formal Definition and History
Composite Bow dates back to 3000 BC (Angara Dating)Composite Bow – dates back to 3000 BC (Angara Dating)
![Page 8: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/8.jpg)
Evolution of Materials
Source: MF Ashby. Phil. Trans R. Soc. London A 1987(332):393-407.
![Page 9: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/9.jpg)
Composite: Examples from Day-to-Day Life
Examples:Examples:1. Straw-bricks2. Concrete3. Wood
(cellulose + lignin)4. Human body
(muscles + bones)5. Tyres6 Plywood6. Plywood7. Sports good ……………………
![Page 10: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/10.jpg)
Evolution of Materials
Use of Modern (Polymer) Composites:Use of Modern (Polymer) Composites:During World War II –
Military applicationNon-metallic shielding of Radomes
(to house electronic radar equipments)Glass Fibre Reinforced Plastics (GFRP)
The first application of wood - composite laminates in -Havilland Mosquito Fighter/Bomber of British Royal Air-Force
![Page 11: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/11.jpg)
Evolution of Materials
Use of Modern (Polymer) Composites:Use of Modern (Polymer) Composites:During World War II –
Attack on Pearl Harbour by JapaneseTorpedo bomber
Sopwith Cuckoo Fairey Swordfish
Source: http://en.wikipedia.org/wiki/Torpedo_bomber
![Page 12: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/12.jpg)
Composite: Necessicity
Why do you need composite materials?Why do you need composite materials?
Enhanced desired properties !What are these desired properties?• Strength• Stiffness• Toughness• Corrosion resistance• Wear resistance• Wear resistance• Reduced weight• Fatigue life• Thermal/Electrical insulation and conductivity• Acoustic insulation• Energy dissipation• Attractiveness, cost, ……………………..•Tailorable properties
![Page 13: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/13.jpg)
Composite: Necessicity
High Fatigue Life:High Fatigue Life:
180.0
200.0 §
§
§ 1241.
1379.
140.0
160.0§
§§
§
§
§
© © © © © © © ©
965.
1103.
100.0
120.0
§
§§
§§
§§
§
©©
©©
©©
©©
©©
©©
© ©
690.
827.
S (Ksi) (MPa)
40 0
60.0
80.0
θ θ θ θ θ θ θθ θ θ θθ
§§
§§
§§
§§
§§
§§
§
øø ø ø ø ø ø ø ø ø
© © ©
276
414.
552.ø
θ 2024-T3 AL
E-GI/Ep
S (Ksi)
20.0
40.0
0.07 00
θθ
θθ θ θ
θ θ θ θ
§§
§ § § §
ø ø ø ø ø ø ø ø ø ø ø ø138.
276.
0.0
©
§
C/EpKevlar/EpB/EpB/ALS-GI/Ep
Source: Mechanics of Fibrous Composites, CT Herakovich, Wiley 1998.
2.00 3.00 4.00 5.00 6.00 7.00
N (10x cycles)
![Page 14: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/14.jpg)
Composite: Necessicity
High Specific Strength and Modulus:High Specific Strength and Modulus:
18.0
Kevlar
IM815.0
BoronS-2 Glass
T300 & AS4
9.00
12.0
ρσ /ult
NicalonSapphire
SCS-6 P 100
o o
6.00
MetalsFP Al
Nicalon
0.00.0
5.00 10.0 15.0
3.00
Source: Mechanics of Fibrous Composites, CT Herakovich, Wiley 1998.
5.00 10.0
ρ/E
![Page 15: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/15.jpg)
Composite: Necessicity
Stress strain curve for fibres:Stress strain curve for fibres:
750. 5171.
9
3
500. 3448.51
4
6
)( ksiσ321
7
2
IM8P100AS4
MPa
250. 1724.
987654
8
S glassFP AlNicalonSCS-6KevlarBoron
(%)ε
0.00.0 1.00 2.00 3.00 4.00 5.00 6.00
Sapphire
Source: Mechanics of Fibrous Composites, CT Herakovich, Wiley 1998.
( )
![Page 16: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/16.jpg)
Composite: Constituents
What are the constituents in a composite material?What are the constituents in a composite material?
1. Reinforcement:discontinuousstrongerharder
2. Matrix:ContinuousContinuous
What are the functions of a reinforcement?1. Contribute desired properties2. Load carrying3. Transfer the strength to matrix
![Page 17: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/17.jpg)
Composite: Constituents
What are the functions of a matrix?What are the functions of a matrix?
1. Holds the fibres together2. Protects the fibres from environment3. Protects the fibres from abrasion (with each other)4. Helps to maintain the distribution of fibres5. Distributes the loads evenly between fibres6. Enhances some of the properties of the resulting material and structural
component (that fibre alone is not able to impart). These properties arecomponent (that fibre alone is not able to impart). These properties aresuch as:
transverse strength of a laminaImpact resistanceImpact resistance
7. Provides better finish to final product
![Page 18: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/18.jpg)
Classification of Composites
Based on the type of matrix materialBased on the type of matrix material
![Page 19: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/19.jpg)
Classification of Composites
Based on the form of reinforcementBased on the form of reinforcement
• Fibre - a filament with L/D very high (of the order 1000)• Fibre - a filament with L/D very high (of the order 1000)• A composite with fibre-reinforcement is called Fibrous Composite
• Particle – non fibrous with no long dimension• A composite with particles as reinforcement is called Particulate Composite
• Whiskers – nearly perfect single crystal fibre• Short, discontinuous, polygonal cross-section
![Page 20: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/20.jpg)
Classification of Composites
Based on theBased on theform of reinforcement
Interest of this course !
![Page 21: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/21.jpg)
Classification of Composites
Based on the form of reinforcementBased on the form of reinforcement
![Page 22: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/22.jpg)
Fibres as a Reinforcement
Fibre reinforced composites is the interest of this course !Fibre reinforced composites is the interest of this course !
Why do you make fibre reinforcements of a thin diameter?1. As the diameter decreases the inherent flaws in the material
also decreases and the strength increases.
E De Lamotte, AJ Perry. Fibre Science and Technology, 1970;3(2):157-166.
![Page 23: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/23.jpg)
Fibres as a Reinforcement
2 For better load transfer from matrix to fibre composites require larger2. For better load transfer from matrix to fibre composites require largersurface area of the fibre matrix interface.
Fib t i i t f A N D LFibre matrix interface area: A = N π D L(N – No. of fibres, D – fibre diameter, L – length of fibres)
Replace D by d (smaller diameter fibres)
For same Fibre Volume Fraction*: n = N(D/d)2For same Fibre Volume Fraction : n N(D/d)
New fibre matrix interface area: A = N π D2 L/d = 4 * Volume of fibres / d
Thus, for a given fibre volume fraction, the area of the fibre-matrix interface isinversely proportional to the diameter of the fibre.* Fibre Volume Fraction (Vf) = Volume of fibres/Volume of compositeMatrix Volume Fraction (Vm) = Volume of matrix/Volume of composite
Vf + Vm = 1
![Page 24: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/24.jpg)
Fibres as a Reinforcement
3 The fibres should be flexible/pliant so that they can be bend easily without3. The fibres should be flexible/pliant so that they can be bend easily withoutbreaking. For example, woven fibre composites needs flexible fibres.
Fl ibilit i d fi d i f b di tiffFlexibility is defined as inverse of bending stiffness.
Consider a fibre as beam under pure bending, thenEI – Bending stiffness or Flexural rigidity
Flexibility α 1/EIFlexibility α 1/EI
where, I = π d4/64
Flexibility α 1/Ed4
Thus, flexibility of a fibre is inversely proportional to 4th power of the fibrediameter.
![Page 25: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/25.jpg)
Types of Fibres
1 Advanced Fibres:1. Advanced Fibres:
Fibres possessing high specific stiffness [E/ρ] and specific strength [σ/ρ])
a) Glass
b) Carbon
c) Organicc) Organic
d) Ceramic
![Page 26: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/26.jpg)
Types of Fibres
2 Natural Fibres:2. Natural Fibres:a) Animal fibres
i) Silk ii) Wool iii) Spider silkiv) Sinew v) Camel hair vi)
b) Vegetable fibresi) Cotton ii) Jute iii) Bambooiv) Sisal v) Maze vi) Hempvii) Sugarcane viii) Banana ix) Ramievii) Sugarcane viii) Banana ix) Ramiex) Kapok xi) Coir xii) Abacaxii) Kenaf xiv) Flax xv) Raffia palm…………..
c) Mineral fibresi) Asbestos ii) Basaltiii) Mineral wool iv) Glass wool
![Page 27: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/27.jpg)
Types of Fibres
Used for Advanced fibres
Conventional Metals
![Page 28: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/28.jpg)
Advanced Fibres
Glass fibres:Glass fibres:• ancient Egyptians made containers from coarse fibres drawn from heat-softened glass
d d b t di lt l t 1200ºC• produced by extruding molten glass at 1200ºC• passed through spinnerets of 1-2 mm diameter• then drawing the filaments to produce fibres of diameter between 1-5 μm• individual filament is small in diameter, isotropic in behaviour and veryflexible• variety of forms:
E glass: high strength and high resistivityS2 glass: high strength, modulus and stability under extreme
temperature, corrosive environmente pe u e, co os ve e v o eR glass: enhanced mechanical propertiesC glass: resists corrosion in an acid environmentD glass: dielectric propertiesD glass: dielectric properties
• In general, glass fibres are isotropic in nature
![Page 29: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/29.jpg)
Advanced Fibres
Carbon fibres:Carbon fibres:• carbon- carbon covalent bond is the strongest in natureGuess who made the first carbon fibre?
Thomas Edison made carbon fibre from bamboo whenexperimenting for light bulb !
What is the difference between carbon and graphite fibres?- Carbon fibre contains 80-95 % of carbon and graphite fibre contains
more than 99% carbon- carbon fibre is produced at 1300ºC while graphite fibre is produced
in excess of 1900ºC
Caution ! - In general term carbon fibre is used for both fibres
Made from two types of precursor materials:Made from two types of precursor materials:1) Polyacrylonitrile (PAN) (PAN Based)2) Rayon Pitch - residue of petroleum refining (Pitch Based)
![Page 30: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/30.jpg)
Advanced Fibres
Carbon fibres:Carbon fibres:• Precursor fiber is carbonized rather then melting• Filaments are made by controlled pyrolysis (chemical deposition by heat) of a
t i l i fib f b h t t t t t t t 1000 3000º Cprecursor material in fiber form by heat treatment at temperature 1000-3000º C• Different fibers have different morphology, origin, size and shape. Themorphology is very dependent on the manufacturing process.• The size of individual filament ranges from 3 to 14 µm. Hence, very flexible.• Maximum temperature of use of the fibers ranges from 250 ºC to 2000 ºC.Properties changes with temperature at higher temperature.• The maximum temperature of use of a composite is controlled by the usetemperature of the matrix• Modulus and strength is controlled by the process-thermal decomposition of theorganic precursor under well controlled conditions of temperature and stress• Heterogeneous microstructure consisting of numerous lamellar ribbons• Thus, carbon fibers are anisotropic in nature, p
![Page 31: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/31.jpg)
Advanced Fibres
Organic fibres: Aramid fibresOrganic fibres: Aramid fibres• Aromatic polyamide – family of nylons.• Polyamide 6 = nylon 6, Polyamide 6.6 = nylon 6.6• Melt-spun from a liquid solution• Morphology – radially arranged crystalline sheets resulting into anisotropicproperties• Filament diameter about 12 µm and partially flexible• High tensile strength• Intermediate modulusIntermediate modulus• Very low elongation up to breaking point• Significantly lower strength in compression• D P t d l d th fib d th t d K l F l (• Du Pont developed these fibers under the trade name Kevlar. From poly (p-Phenylene terephthalamide (PPTA) polymer• 5 grades of Kevlar with varying engineering properties are available
kevlar-29, Kevlar-49, Kevlar-100, Kevlar-119, Kevlar-129
![Page 32: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/32.jpg)
Advanced Fibres
Ceramic Fibres: BoronCeramic Fibres: Boron
It was the first advanced fibre developed for structural application (Talley 1959)
• Ceramic monofilament fiber• Manufactured by CVD on to a tungsten core of 12 µm diameter
TungstenBoronBoron
• Fiber itself is a composite• Circular cross section• Fiber diameter ranges between 33 -400µm and typical diameter is 140µm• Boron is brittle hence large diameter results in lower flexibility
CP Talley. J. Appl. Phys. 1959, Vol. 30, pp 1114.
![Page 33: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/33.jpg)
Advanced Fibres
Ceramic Fibres: BoronCeramic Fibres: Boron
• Thermal coefficient mismatch between boron and tungsten results in thermalid l t d i f b i ti l d t t tresidual stresses during fabrication cool down to room temperature
• When coated with Sic or B4C can be used to reinforce light alloys• Strong in both tension and compression• Exhibit linear axial stress-strain relationship up to 650ºC• High cost of production
![Page 34: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/34.jpg)
Advanced Fibres
Ceramic fibres: Alumina (Al O )Ceramic fibres: Alumina (Al2O3)
• These are ceramics fabricated by spinning a slurry mix of alumina particles anddditi t f hi h i th bj t d t t ll d h tiadditives to form a yarn which is then subjected to controlled heating.
• Fibers retain strength at high temperature
![Page 35: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/35.jpg)
Advanced Fibres
Ceramic fibres: Silicon Carbide (SiC)Ceramic fibres: Silicon Carbide (SiC)
First method: CVD on tungsten or carbon- Carbon – pyrolytic graphite coated carbon core SCS-6- This fiber is similar in size and microstructure to boron- Relativity stiff, size of 140 µm
Second method: (Nicalon by Japan)- Controlled pyrolysis (chemical deposition by heat) of a polymeric- Controlled pyrolysis (chemical deposition by heat) of a polymeric
precursor- filament is similar to carbon fiber in size.
Si ≈ 14- Size ≈ 14 µm- more flexible
• SiC shows high structural stability and strength retention even at temperatureabove 1000ºC
![Page 36: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/36.jpg)
Cross Sectional Shapes of Fibres
Shape ExamplesShape Examples
Circular:Glass, Carbon, Organic fibres,Alumina, Silicon Carbide
Elliptical:Alumina, Mullite
Triangular:Silk, Silicon Carbide whiskers
![Page 37: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/37.jpg)
Shape Examples
Cross Sectional Shapes of Fibres
Shape Examples
Hexagonal:Sapphire (Al2O3) whiskers
Rounded Trianagular:gSapphire (Al2O3) single crystal fibre
Kideney bean:Carbon
Trilobal:Carbon, Rayon
![Page 38: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/38.jpg)
Types of Matrix Materials
Polymers:Polymers:Thermoplastic: Soften upon heating and can be reshaped with heat &
pressureTh tti b li k d d i f b i ti & d tThermosetting: become cross linked during fabrication & do not
soften upon reheating
Metals:
Ceramics:
Carbon and Graphite:
![Page 39: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/39.jpg)
Types of Matrix Materials
Thermoplastics:Thermoplastics:polypropylene,polyvinyl chloride (PVC),nylon,polyurethane,poly-ether-ether ketone (PEEK),polyphenylene sulfide (PPS),polysulpone
• higher toughness• high volume• low- cost processing• Temperature range ≥ 225ºC
![Page 40: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/40.jpg)
Types of Matrix Materials
Thermoplastics:Thermoplastics:Thermoplastics are increasingly used over thermosets becuase of the followingreasons:
• Processing is faster than thermoset composites since no curing reaction isrequired. Thermoplastic composites require only heating, shaping and cooling.• Better properties:
- high toughness (delamination resistance) and damage tolerance,- low moisture absorption- chemical resistance
• They have low toxity.
• Cost is high !
![Page 41: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/41.jpg)
Types of Matrix Materials
Thermosets:Thermosets:polyesters,epoxies,polyimidesOther resins
Polyesters:• Low cost• Good mechanical strength• Good mechanical strength• Low viscosity and versatility• Good electrical properties• Good heat resistance• Cold and hot molding• Curing temperature is 120°C
![Page 42: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/42.jpg)
Types of Matrix Materials
Thermosets:Thermosets:Epoxy:
• Epoxy resins are widely used for most advanced composites.
Advantages:
• Low shrinkage during curing• High strength and flexibility• High strength and flexibility• Adjustable curing range• Better adhesion between fibre and matrix• Better electrical properties• Resistance to chemicals and solvents
![Page 43: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/43.jpg)
Types of Matrix Materials
Thermosets:Thermosets:Epoxy:
Disadvantages:
• somewhat toxic in nature• limited temperature application range upto 175°C• moisture absorption affecting dimensional properties• high thermal coefficient of expansion• high thermal coefficient of expansion• slow curing
![Page 44: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/44.jpg)
Types of Matrix Materials
Thermosets:Thermosets:Polyimides:
• Excellent mechanical strength• Excellent strength retention for long term in 260-315°C (500-600°F) rangeand short term in 370°C (700°F) range• Excellent electrical properties• Good fire resistance and low smoke emission• Hot molding under pressure andHot molding under pressure and• Curing temperature is 175°C (350°F) and 315°C
![Page 45: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/45.jpg)
Types of Matrix Materials
Problems with using polymer matrix materials:Problems with using polymer matrix materials:
• Limited temperature range• Susceptibility to environmental degradation due to moisture, radiation,atomic oxygen (in space)• Low transverse strength• High residual stress due to large mismatch in coefficients of thermalexpansion both fiber and matrix• Polymer matrix can not be used near or above the glass transitiontemperature
![Page 46: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/46.jpg)
Types of Matrix Materials
Metals:Metals:AluminumTitaniumCopper
• Higher use temperature rangeAluminum matrix composite – use temperature range above 300ºCand titanium at 800 ºC
• Higher transfer strength, toughness( in contrast with brittle behavior ofHigher transfer strength, toughness( in contrast with brittle behavior ofpolymers and ceramics)• The absence of moisture & high thermal conductivity (copper)
Disadvantages:• Heavier• More susceptible to interface degradation at the fiber/matrix interface and tocorrosion
![Page 47: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/47.jpg)
Types of Matrix Materials
Ceramics:Ceramics:Carbon,Silicon carbide andSilicon nitride
• Ceramic have use very high temperature range > 2000 ºC• High elastic modulus• Low density
Disadvantages:• brittleness• Susceptible to flows
![Page 48: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/48.jpg)
Types of Matrix Materials
Carbon:Carbon:carbon fibres in carbon matrix – carbon/carbon compositesused under extreme mechanical and thermal loads (space applications)
Advantages:• Low specific weight• High heat absorption capacity• Resistance to thermal shock• High resistance to damage• Exceptional frictional properties at high energy levels• Exceptional frictional properties at high energy levels• Resistance to high temperatures• Chemical inertness• low coefficient of thermal expansion (excellent dimensional stability)
Disadvantages:• low resistance to oxidation above 500°C• high cost of materials and manufacturing
![Page 49: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/49.jpg)
Properties of Fibre and Matrix Materials
![Page 50: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/50.jpg)
Forms of Fibrous Composites
Layered composites:Layered composites:
LayerLamina any of the term is usedPly
Axial – along fibre length (1)
Transverse – perpendicularTransverse – perpendicularto fibre length2 – in-plane transverse3 – out of plane transverse
![Page 51: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/51.jpg)
Forms of Fibrous Composites
Layered composites:Layered composites:
Laminate
![Page 52: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/52.jpg)
Forms of Fibrous Composites
Woven Bi directional composite:Woven Bi-directional composite:
Three types of weave
Our interest is lamina and laminate !
http://www.britannica.com/EBchecked/topic/638448/weaving
![Page 53: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/53.jpg)
Types of Fibrous Composites
Fibre and Matrix Systems:Fibre and Matrix Systems:
Notation:fibre/matrixcarbon/epoxy, glass/epoxy, Kevlar/epoxyproportion of contents must be mentioned (volume fraction)
Examples:AS4/PEEKAS4/PEEK,T300/5208T700/M21
Carbon Composites
IM8/EpoxyKevlar/EpoxyBoron/AlSCS-6/Ti-15-3S2 Glass/Epoxy
![Page 54: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/54.jpg)
Properties of Fibrous Composites
• Reduction in properties• Reduction in propertiesCompared to reinforcementproperties
• Axial along fibre length• Transverse perpendicularto fibre• Degree of orthotropy
![Page 55: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/55.jpg)
Properties of Fibrous Composites
Parameters affecting the properties of fibrous composites:Parameters affecting the properties of fibrous composites:
1. Length of the fibre
2. Orientation of the fibre (with respect to the loading direction)
3. Shape of the fibre
4 Distribution of the fibres in matrix material4. Distribution of the fibres in matrix material
5. Properties of the fibres
6. Properties of the matrix material
7. Proportion of fibre and matrix material
![Page 56: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/56.jpg)
Factors Affecting Fabrication Processes
1 i1. User requirements
2. Performance requirements
3. Total production volume
4. Production rate
5. Cost of production
6. Size of the production
7. Surface finish of the final product
8. Geometry of the product
9. Material
![Page 57: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/57.jpg)
Fabrication Processes of Fibrous Composites
• More than 50 processes depending upon the fibre and matrix type and nature• More than 50 processes depending upon the fibre and matrix type and nature
• Wet/Hand Lay-Up• Spray Lay-Up• Vacuum Bagging• Filament Winding• Pultrusion• Resin Transfer Molding (RTM)• Braiding• Braiding• Vacuum Assisted RTM• Centrifugal Casting
![Page 58: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/58.jpg)
Fabrication Processes of Fibrous Composites
• Wet/Hand Lay Up• Wet/Hand Lay-Up
Source: http://www.gurit.com
![Page 59: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/59.jpg)
Fabrication Processes of Fibrous Composites
• Spray Lay Up• Spray Lay-Up
Source: http://www.gurit.com
![Page 60: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/60.jpg)
Fabrication Processes of Fibrous Composites
• Vacuum Bagging• Vacuum Bagging
Source: http://www.gurit.com
![Page 61: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/61.jpg)
Fabrication Processes of Fibrous Composites
• Filament Winding• Filament Winding
Source: http://www.gurit.com
![Page 62: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/62.jpg)
Fabrication Processes of Fibrous Composites
• Pultrusion• Pultrusion
Source: http://www.gurit.com
![Page 63: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/63.jpg)
Fabrication Processes of Fibrous Composites
• Resin Transfer Moulding (RTM)• Resin Transfer Moulding (RTM)
Source: http://www.gurit.com
![Page 64: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/64.jpg)
Fabrication Processes of Fibrous Composites
• Braiding• Braiding
![Page 65: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/65.jpg)
Fabrication Processes of Fibrous Composites
• Centrifual Casting• Centrifual Casting
![Page 66: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/66.jpg)
Applications of Fibrous Composites
•Aerospace/Military:•Aerospace/Military:
• Civil:
• Electronic:
• Energy:
• Automobile/Transportation:• Automobile/Transportation:
• Sports:
• Medical:
• Marine:•……………………………………………
![Page 67: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/67.jpg)
Applications of Fibrous Composites
Aerospace: Use of composites in LCA TejasAerospace: Use of composites in LCA Tejas
![Page 68: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/68.jpg)
Applications of Fibrous Composites
Aerospace: Use of composites in LCHAerospace: Use of composites in LCH
![Page 69: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/69.jpg)
Applications of Fibrous Composites
Aerospace: Use of composites in LCHAerospace: Use of composites in LCH
![Page 70: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/70.jpg)
Applications of Fibrous Composites
Aerospace: Helicopter BladeAerospace: Helicopter Blade
![Page 71: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/71.jpg)
Applications of Fibrous Composites
Automobile/Transportation:Automobile/Transportation:
![Page 72: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/72.jpg)
Applications of Fibrous Composites
Sports:Sports:
![Page 73: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/73.jpg)
Applications of Fibrous Composites
Wind Energy:W d e gy:
![Page 74: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/74.jpg)
Applications of Fibrous Composites
Medical:ed c :
![Page 75: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/75.jpg)
Applications of Fibrous Composites
Civil/Infrastructure:C v / s uc u e:
![Page 76: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/76.jpg)
Applications of Fibrous Composites
Marine:e:water lubricated propeller shaft bearings
![Page 77: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/77.jpg)
Disadvantages of Composite Materials
1 High cost of raw materials and fabrication1. High cost of raw materials and fabrication.2. Composites are brittle and thus are more easily damagable.3. Transverse properties may be weak.4. Matrix is weak, therefore, low toughness.5. Reuse and disposal may be difficult.6. Health hazards during manufacturing , during and after use.7. Joining to parts is difficult8. Repair introduces new problems, for the following reasons:
• Materials require refrigerated transport and storage and have• Materials require refrigerated transport and storage and havelimited shelf life.• Hot curing is necessary in many cases requiring special tooling.
C i t k ti• Curing takes time.9. Analysis is difficult.10. Matrix is subject to environmental degradation
![Page 78: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/78.jpg)
References and Additional Reading
1 MF Ashby Technology of the 1990s: advanced materials and predictive design1. MF Ashby. Technology of the 1990s: advanced materials and predictive design.Philosophical Transactions of Royal Society of London A. 1987;322:393-407.
2. LC Hollaway. The evolution of and the way forward for advanced polymercomposites in civil infrastructure Construction and Building Materialscomposites in civil infrastructure. Construction and Building Materials.2003;17:365-378.
3. KK Chawla. Fibrous Materials. Cambridge University Press, 1998.4 htt // i / it /4. http://www.owenscorning.com/composites/5. http://www.gurit.com/6. http://www.hexcel.com/7. http://www.toray.com/
![Page 79: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/79.jpg)
Natural Fibres
Animal fibres:Animal fibres:Silk:
Soft, long fibres,
lustrous
Yarns, threads in textile uses
![Page 80: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/80.jpg)
Natural Fibres
Animal fibres:Animal fibres:Spider Silk:
Protein fibre
![Page 81: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/81.jpg)
Natural Fibres
Vegetable fibres:Vegetable fibres:Cotton:
Soft, fluffy, short fibres
12-20 µm diameter, 10-60 mm length
Yarns, threads in textile uses
![Page 82: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/82.jpg)
Natural Fibres
Vegetable fibres:Vegetable fibres:Hemp:
Long fibres about 2 m in length
Lustrous like linen with special processing
Strong and durable. Used for twine, yarn, ropestringstring
Used as artificial sponge
![Page 83: AE-681 Composite Materials](https://reader031.vdocument.in/reader031/viewer/2022021815/586cce171a28abc4468b8821/html5/thumbnails/83.jpg)
Natural Fibres
Comparison of Properties:Comparison of Properties: