aerofab ndt, llc product brochureaerofabndt.com/wp-content/uploads/2020/06/catalog-1028.pdf ·...
TRANSCRIPT
EDDY CURRENT PROBES
REFERENCE STANDARDS
ULTRASONIC TRANSDUCERS
PROD
UCT
BROC
HURE
PROD
UCT
BROC
HUREAEROFAB NDT, LLC
Since 2013
CONTACT
U.S. & CANDA+1(253)395-8706
INTERNATIONAL+1(844)495-9219
SHOP LOCATION8629 SOUTH 212TH STREET
KENT, WA 98031 - USA
SALES [email protected]
This brochure is a sample of the
products offered by AeroFab NDT.
Please contact our sales team below
for all further inquiries.
AEROFAB NDT, LLCSINCE 2013
Copyright © 2019 - Brochure designed by Sophea Puth
2019
AEROFAB NDT, LLC
8629 SOUTH 212TH STREET
KENT, WA 98031 - USA
WWW.AEROFABNDT.COM
TA B L E O F C O N T E N T S
ABOUT US
AIRCRAFT COMPOSITES
EDDY CURRENT PROBES
REFERENCE STANDARDS
TEST REPORT & COC
Founded in 2013 - Headquartered in Kent , WA - USA
AeroFab NDT is a fu l ly equipped machine shop provid ing NDT serv ices in support of the Aerospace & Aviat ion industry. We specia l ize in the sa le and manufacture of nondestruct ive test ing (NDT ) tools for customer inspect ion requirements . We have over 50 years ’ exper ience in NDT fabr icat ion/design and are cont inual ly expanding our product knowledge to meet the evolv ing needs of th is industry. In-house operat ions enable control over qual i ty and ensures we provide the shortest lead t imes. We offer custom tools des igned and manuctured to customer speci f icat ions a long with accessor ies , machining /EDM, and repair serv ices .
Special i t ies:
» Reference standards (Boeing , A irbus, Bombardier, McDonnel l Douglas , Mi l i tary) » Eddy current probes » Ultrasonic Transducer » Custom kit boxes
WARRANTY
00.
01. 03. 07. 10. 11.
13. 14.
A B O U T U S
ULTRASONIC TRANSDUCERS
CUSTOM KIT BOXES
1 2
p r o d u c t b r o c h u r e p r o d u c t b r o c h u r e
C 12/ F 12 S E R I E S S T S E R I E S N D T S E R I E S A I R B U S
C 12- D I S -3 C 1 N S T 8870-1 N D T 1033-10 99 D 55109001000
C 12- D E L -3 C 1 N S T 8870-4 N D T 1038 99 D 51407291001
C 12- P S C -3 C 1 N S T 8870-7 N D T 1106
C 12- P OT -3 C 1 N S T 8870-8 N D T 1046- X X
F 12- D I S -3 C 1 N S T 8870-9
F 12- D E L -3 C 1 N S T 8871 D
F 12- P C S -3 C 1 N S T 8871
The dr ive to increase fuel eff ic iency and improve aerodynamic performance is leading des igners to move away from us ing a luminum in a i r f rames. As the use of carbon f iber composites in a i rcraft structures has grown, so has the need for re l iable nondestruct ive test ing.
A I R C R A F T C O M P O S I T E S
P/ N S H A F T C O N N E C TO R F R E Q U E N C Y S H I E L D I N G
A X T P N -5 0.072 T R I A X 50 K H Z - 500 K H Z S H I E L D E D
A X P N -5 0.072 M I C R O D OT 50 K H Z - 500 K H Z S H I E L D E D
A S T P N -5 0.093 T R I A X 50 K H Z - 500 K H Z S H I E L D E D
A S P N -5 0.093 M I C R O D OT 50 K H Z - 500 K H Z S H I E L D E D
AT P N -5 0.125 T R I A X 50 K H Z - 500 K H Z S H I E L D E D
A P N -5 0.125 M I C R O D OT 50 K H Z - 500 K H Z S H I E L D E DA P N U -5 0.125 M I C R O D OT 50 K H Z - 500 K H Z U N S H I E L D E D
P/ N S H A F T C O N N E C TO R F R E Q U E N C Y S H I E L D I N G
A X T P N -45-5 0.072 T R I A X 50 K H Z - 500 K H Z S H I E L D E D
A X P N -45-5 0.072 M I C R O D OT 50 K H Z - 500 K H Z S H I E L D E D
A S T P N -45-5 0.093 T R I A X 50 K H Z - 500 K H Z S H I E L D E D
A S P N -45-5 0.093 M I C R O D OT 50 K H Z - 500 K H Z S H I E L D E D
AT P N -45-5 0.125 T R I A X 50 K H Z - 500 K H Z S H I E L D E D
A P N -45-5 0.125 M I C R O D OT 50 K H Z - 500 K H Z S H I E L D E DAPNU-45-5 0.125 MICRODOT 50 KHZ - 500 KHZ UNSHIELDED
3 4
p r o d u c t b r o c h u r e p r o d u c t b r o c h u r e
Tradit ional ly used to determine mater ia l th ickness , non-conduct ive coat ing th ickness , conduct iv i ty and p lat ing measurement, and cracks .
E D D Y C U R R E N T P R O B E S
UniRotor/Nortec
ROTARY PROBEUsed for test ing of fastener holes . P last ic t ips that automat ica l ly compress to their or ig ina l s ize after being expanded to f i t ins ide larger bolt holes . Avai lable in absolute or d i fferent ia l conf igurat ion.
ROTARY COUNTERSINKUsed to scan the ins ide of a bore for cracks . Manual ly adjustable to meet d i fferent hole d iameters . Standard work ing length ranges 1 .1” - 2 .0”.
FLEXSHAFTThe f lex ib le shaft of these probes can be shaped to perform inspect ions of areas that are very d i ff icu l t to reach, Excel lent for smal l defect detect ion and areas inaccess ib le to standard probes.
ROTATING STAINLESS STEELIdeal for detect ing f laws ins ide fastener holes . These probes are extremely res istant to damage. Wear-res istant sta in less steel t ip . Increased sens i t iv i ty to smal l surface cracks .
WEAR-RESISTANT
S C A N N E R P R O B E S
UNIVERSAL/
RECHII
STRAIGHT
ANGLE SHAFT (45˚)
90˚
P/ N S H A F T C O N N E C TO R F R E Q U E N C Y S H I E L D I N G
A X T P N -95-5 0.072 T R I A X 50 K H Z - 500 K H Z S H I E L D E D
A X P N -95-5 0.072 M I C R O D OT 50 K H Z - 500 K H Z S H I E L D E DA S T P N -95-5 0.093 T R I A X 50 K H Z - 500 K H Z S H I E L D E D
A S P N -95-5 0.093 M I C R O D OT 50 K H Z - 500 K H Z S H I E L D E D
AT P N -95-5 0.125 T R I A X 50 K H Z - 500 K H Z S H I E L D E D
A P N -95-5 0.125 M I C R O D OT 50 K H Z - 500 K H Z S H I E L D E D
APNU-95-5 0.125 MICRODOT 50 KHZ - 500 KHZ UNSHIELDED
S U R F A C E P R O B E S
STR
AIG
HT
- A
NG
LE -
90˚
Options inc lude: f requency - length - connector - drop length - bent shaft angleStandard features: 0.125” d iameter - de lr in handle - 50-500 kHz - Microdot connector
5 6
p r o d u c t b r o c h u r e p r o d u c t b r o c h u r e
L O W F R E Q U E N C Y P R O B E S
A N G L E T H I C K N E S S M I C R O D O T 50-500 K H Z
T R I A X 50-500 K H Z
S T R A I G H T 0.030” A B L - .030-6 AT B L - .045-6
S T R A I G H T 0.045” A B L - .045-6 AT B L - .045-6
S T R A I G H T 0.060” A B L - .060-6 AT B L - .060-6
S T R A I G H T 0.090” A B L - .090-6 AT B L - .090-6
M I S C E L L A N E O U S
Designed to work in areas with l imited access such as narrow s lots or gaps between structures for detect ion of surface abnormal i t ies .
O P T I O N S » Angle (30 ˚ ,45 ˚ ,90 ˚) » Connector » Working length
BLADE PROBES
S TA N D A R D
overal l length: 6”
working length: 3 .5”
SLIDING PROBESDirect ional ly sens i t ive and feature engraved l ines to ass ist scan or ientat ion to expected d irect ion of cracks . Speci f ica l ly des igned to inspect rows of fuselage fasteners .
S TA N D A R D » Mater ia l : P last ic » Coi l type: Ref lect ion
T R I A X F I S C H E RM I C R O D O T
Used for d iscover ing f laws on and below surfaces . Their large coi l d iameter & low frequency operat ion provide an increased detectable f law s ize . Typica l ly suppl ied with a t r iax f i scher connector.
O P T I O N S » Top or s ide mount
» Right angle or stra ight
» Connector
SPOT BRIDGE
RING PROBES
Made to f i t var ious fastener head d iameters . Most ly used for subsurface crack detect ion with the fastener in p lace. Typica l ly suppl ied with a t r iax f i scher connector.
O P T I O N S » Br idge or ref lect ion » Connector
C O N N E C TO R P R O B E T Y P E P R O B E C O N N E C T I O NU N I V E R S A L R E C H I I
4- P I N F I S C H E R U N I V E R S A L R OTO R - - A U R - R A
4- P I N S T E P R E C H I I R OTO R R A - U R --
CABLES & ADAPTORS
I N S T R U M E N TP R O B E C O N N E C TO R
M I C R O D O T T R I A X F I S C H E R / L E M O
N O R T E C 500-2000 S E R I E S A C N 16- M D 6/50-500 K A C N 16- T F 6- B A C N 16- T F 6- R
E L OT E S T B 1, B 2 A C B 1- M -6/50-500 K A C B 1- C F -6/50-500 K
G E / H O C K I N G P H A S E C S E R I E S A C P 2 D - M D 6 A C P 2 D - T F 6- B A C P 2 D - T F 6- R
F R E Q U E N C Y S I D E M O U N T TO P M O U N T
5 M H Z A F C -518 S A F C -518 T10 M H Z A F C -1018 S A F C -1018 T15 M H Z A F C -1518 S A F C -1518 T
E L E M E N T: 0 .187” C A S E : 0 .250” O D
5 M H Z A F C -531 S A F C -531 T10 M H Z A F C -1031 S A F C -1031 T15 M H Z A F C -1531 S A F C -1531 T
2.25 M H Z A F C -231 S A F C -231 T
E L E M E N T: 0 .250” C A S E : 0 .312” O D
5 M H Z A F C -525 S A F C -525 T10 M H Z A F C -1025 S A F C -1025 T15 M H Z A F C -1525 S A F C -1525 T
2.25 M H Z A F C -225 S A F C -225 T
E L E M E N T: 0 .375” C A S E : 0 .375” O D
5 M H Z A F C -550 S A F C -550 T10 M H Z A F C -1050 S A F C -1050 T15 M H Z A F C -1550 S A F C -1550 T
2.25 M H Z A F C -250 S A F C -250 T1 M H Z A F C -150 S A F C -150 T
E L E M E N T: 0 .500” C A S E : 0 .625” O D
7 8
p r o d u c t b r o c h u r e p r o d u c t b r o c h u r e
Tradit ional ly used to determine mater ia l th ickness , non-conduct ive coat ing th ickness , conduct iv i ty and p lat ing measurement, and cracks .
u lt r a s o n i c t r a n s d u c e r sProvides h igh sens i t iv i ty and constructed for serv ice under the toughest condit ions, Low
prof i le for d i ff icu l t - to-access surfaces .
DUAL ELEMENT
STRAIGHT BEAM/FINGERTIP
contact
Improves near surface resolut ion. Couples wel l on rough or curved surfaces
REPLACEABLE DELAY
Designed speci f ica l ly for use with a replaceable delay l ine. Standard t ip length: 0 .390”.
E L E M E N T D I A M E T E R
0.125 0.250 0.500
FREQ
UEN
CY
(MH
Z)
1 - - - - A R D -150
2.25 - - A R D -225 A R D -250
5 - - A R D -525 A R D -550
10 A R D -1012 A R D -1025 A R D -1050
15 A R D -1512 A R D -1525 --
20 A R D -1220 -- - -
E L E M E N T D I A M E T E R
0.250 0.500
FREQ
UEN
CY
5 M H Z A D L -525 A D L -550
10 M H Z A D L -1025 --
15 M H Z A D L -1525 --
5 MHZ 10 MHZ
A N G L E A L U M I N U M S T E E L A L U M I N U M S T E E L
X-S
MA
LL 45 A F X -545 A S A F X -545 S S A F X -1045 A S A F X -1045 S S
60 A F X -560 A S A F X -560 S S A F X -1060 A S A F X -1060 S S
70 A F X -570 A S A F X -570 S S A F X -1070 A S A F X -1070 S S
E L E M E N T: 0 .187” C A S E : 0 .375” X 0.260” 0.375
SMA
LL
45 A F S -545 A S A F S -545 S S A F S -1045 A S A F S -1045 S S
60 A F S -560 A S A F S -560 S S A F S -1060 A S A F S -1060 S S
70 A F S -570 A S A F S -570 S S A F S -1070 A S A F S -1070 S S
E L E M E N T: 0 .187” C A S E : 0 .550” X 0.260” X 0.450”
MED
IUM 45 A F M -545 A S A F M -545 S S A F M -1045 A S A F M -1045 S S
60 A F M -560 A S A F M -560 S S A F M -1060 A S A F M -1060 S S
70 A F M -570 A S A F M -570 S S A F M -1070 A S A F M -1070 S S
E L E M E N T: 0 .250” C A S E : 0 .750” X 0.370” X 0.500”
LAR
GE 45 A F L -545 A S A F L -545 S S A F L -1045 A S A F L -1045 S S
60 A F L -560 A S A F L -560 S S A F L -1060 A S A F L -1060 S S
70 A F L -570 A S A F L -570 S S A F L -1070 A S A F L -1070 S S
E L E M E N T: 0 .375 C A S E : 1 .0” X 0.500” X 0.625”
9 10
p r o d u c t b r o c h u r e p r o d u c t b r o c h u r e
X-SMALL -Excel lent s ignal to noise rat ios-ideal for d i ff icu lty acces inspect ions
SMALL -Excel lent s ignal to noise rat ions- ideal for medium-diff icu lt access inspect ions
MEDIUM -For wide area scans and deep penetrat ions
LARGE -For wide area scans and deep penetrat ions
s h e a r w av e / a n g l e b e a m R E F E R E N C E S TA N D A R D S
AIRCRAFT STANDARDS
» Airbus
» Boeing
» Bombardier
» Mil i tary (Air force & Navy)
» ATR
» McDonnel l Douglas
SURFACE STANDARDSSurface standards provide a reference point before the start of any inspect ion procedure
Our standards are ava i lable in a lmost every a l loy with hole d iameters to su i t your appl icat ion. Notch conf igurat ion & fastener type can a l l be speci f ied. Be low are a few of our offer ings:
T Y P E A L L OYA L U M I N U MA L U M I N U M 2024- T 3
6061- T 67075- T 67075- T 7
S T E E L A S 4340A S 4130
T I TA N I U M 6 A L 4 VS TA I N L E S S S T E E L A I S I 304 L
A I S I 303 L15-5 P H17-7 P H
I N C O N E L 600625718
M A G N E S I U MB R O N Z E - A L U M I N U M 13% I A C S
STANDARD MATERIALSHOLE STANDARDS
Economical way to provide severa l hole and notch conf igurat ions on the same plate or severa l p lates comine
oil-protective coating to prevent corrosion
STAINLESS STEEL SCANNER PROBE KIT
Sta in less steel rotat ing scanner probe k i t inc ludes 12 sta in less steel rotat ing scanner probes in a wa-terproof case. S izes range from 0.125” to 0 .750” - a l l with a 2” work ing length. Suppl ied with a 4-p in f i scher connector.
BOEING 767 UT INSPECTION KITPART 4 57-20-04
UT front spar p i tch- load f i tt ings inspect ion k i t for PART 4 57-20-04. Inc ludes one each of the fo l lowing in a waterproof Pel ican 1150 case: AFS-1036, AFX-545AS, NDT6036, NDT6036P1, NDT6036P2, ABNC-MD6 cable, 4 oz bott le of couplant .
AFK-AUR12SSTO ORDER:
afk-6036TO ORDER:
C U S T O M K I T S
RECHII BOLT HOLE SCANNERPROBE KIT
Rechi i universa l rotary hole k i t . Inc ludes 8 of the fo l lowing sp l i t-end probes in a waterproof case: ARR- .156- .187, ARR- .187- .218, ARR- .218- .250, ARR- .250- .281, ARR- .281- .312, ARR- .312- .375, ARR- .375- .437, ARR- .437- .500.
BOEING 737 HORIZONTAL STABLIZER KITPART 4 55-10-13
Rear spar terminat ion f i tt ing inspect ion k i t . Inc ludes one each of the fo l lowing in a waterproof Pel i -can 1150 case: AFS-1346, AFS-1346-SC, NDT3141, NDT3141G1, 4 Oz. bott le of couplant , ABNC-MD6.
afk-AAR-.156-.500SETO ORDER:
AFK-1005TO ORDER:
BOEING 737NG SDI WING INSPECTION
Procedure reference: 57-10-05, 57-10-06 57-10-07, 57-10-09, 57-10-13, 57-10-17 57-10-53, 57-10-54, 57-10-55, 57-10-5857-10-59, 57-10-60, 57-10-62
6 layer k i t with custom foam cutouts for a l l parts
Ships in SKB iSer ies case - gasket sealed, water and dust t ight , submers ib le des ign that i s res istant to corros ion and impact
Case features molded- in h inge, t r igger re lease latch system, snap-down rubber over molded cushion gr ip handle, and automat ic ambient pressure equal izat ion va lve
AFK-7374TO ORDER:
11 12
p r o d u c t b r o c h u r e p r o d u c t b r o c h u r e
Al l manufactured parts are suppl ied with a test report (when appl icable) & COC at no extra charge
L I M I T E D W A R R A N T YWE STAND BEHIND THE QUALIITY OF OUT PRODUCTS
Al l of our i tems go through severa l stages of qual i ty control before i t reaches the end user and are guaranteed to be f ree of defects at the t ime of sh ipment. Our l imited warranty covers any defects in workmanship under normal use. Negl igence, unauthor ized modif icat ions, acc idents , theft or misuse of a product do not qual i fy as defects . A l l i tems are subject to our inspect ion pr ior to repair or replacement.
COVERAGE
AeroFab’s l imited warranty only appl ies to i tems purchased d irect ly or through author ized resel lers and are covered under a one-year warranty f rom date received. I f we are unable to perform a funct ional repair, we wi l l happi ly replace the i tem at no charge.
REQUESTING A RETURN AUTHOIZATION (RMA)
Cla ims are required for returns. P lease emai l [email protected] for ass istance with your order.
SHIP TO:
AeroFab NDT, LLC8629 South 212th StreetKent, WA 98031 - USA
CONTACT:
sa [email protected]+1 (844) 495-9219+1 (253) 395-8706
T E S T R E P O R T & C O C
13 14
p r o d u c t b r o c h u r e p r o d u c t b r o c h u r e