aerogen nebulizer - rt connection · 30 min. - press & release continuous mode - 3 sec. hold...
TRANSCRIPT
Aerogen Nebulizer
Adult Ventilator Use
Parts1. Aerogen Neb2. T-Piece*3. Controller box4. Controller cable5. AC Adapter6. Mounting bracket7. Continuous Neb
tube set
*Adult sized
Set-up
Aerogen Controller
Adding meds
• Uncap thesilicone plugand introducethe medication
• Make sure theAerogen isupright.
Syringe Pump
• Power on
• Press #4
Syringe Pump
• Hit the oval keybelow “MORE” atthe bottom of thescreen
• Choose “1” ML/HR
• On the nextscreen, choose “1”B-D (not shown)
Syringe Pump
• Load prepared syringe(note: this is a syringe andtubing specially designedfor this application,available in the RTdepartment)
• Use the lever on the endto set move arm and locksyringe in place.
• Hit “ENTER” when done
Syringe Pump
Syringe Pump
• Type 12 and hit“ENTER”
• At this screen, hit“Disable”, leaving thebox blank.
• Choose “YES” toconfirm settings (Notshown)
Syringe Pump
• Press “BOLUS” key toprime tubing(remove the air fromtubing.
• Press “EXIT” whenpriming is complete
• Press the START key